ygraeriokinisi lpg in motionygraeriokinisi.com/product catalogue ygraeriokinisi 2011... · 2012. 3....
TRANSCRIPT
ProductProduct CatalogueCatalogue
AutomotiveAutomotive
LPGLPG
EquipmentEquipment
2011/122011/12
YGRAERIOKINISIYGRAERIOKINISILPG IN MOTIONLPG IN MOTION
YGRAERIOKINISIYGRAERIOKINISILPG IN MOTIONLPG IN MOTION
YGRAERIOKINISIYGRAERIOKINISI is one of Greeceis one of Greece’’ss
leading supplier of Gasleading supplier of Gas--Systems for vehicleSystems for vehicle
applications.applications.
Our highly qualified experts areOur highly qualified experts are
active in sales, conversion,active in sales, conversion,
training and advice ontraining and advice on
conversion of vehicles and allconversion of vehicles and all
type of common engines to runtype of common engines to run
on gaseous fuels, since 1995.on gaseous fuels, since 1995.
As a result we are representingAs a result we are representing
some of the leading Europeansome of the leading European
manufacturers of LPG/CNGmanufacturers of LPG/CNG
equipment.equipment.
We provide reliable and highestWe provide reliable and highest
quality products . Implementedquality products . Implemented
quality control procedures assurequality control procedures assure
100% customer satisfaction.100% customer satisfaction.
We offer products of which we areWe offer products of which we are
sure they meet the demandingsure they meet the demanding
requirements of our clients withrequirements of our clients with
warranty up to 5 years andwarranty up to 5 years and
extended support. extended support.
All products comply with ECE R 67All products comply with ECE R 67
and ECE R 110 regulations. and ECE R 110 regulations. AdditionalyAdditionaly
we can provide ECE R 115 certificationwe can provide ECE R 115 certification
on selected group of cars.on selected group of cars.
YK - SEQUENTIAL GAS INJECTION SYSTEM
Is mainly desinged for modern cars, with technological advanced OBD2 systems, however it might be also used in older types of cars.Thanks to its modern construction and highly efficient CPU it gives possibillityto fullfill strict emission exhaust norms, keeping the driving dynamic and performance identically as on petrol.
The Gas controllers use unique algorithms of controlling LPG injectorsInjection opening time for each gas injector is being calculatedindividually, in real time, based on injection opening time of petrol injectorcorresponding to it.
Thanks to that solution efficiency and dynamics of driving on gas are practicallyidentical to the one petrol. Another advantage of that solution is the fact that the controller works without any problems with car's engines like Valvetronik(constant value of vacuum in the inlet manifold) and cars which are having opening time differences between individual injectors (Subaru).
Our Gas ECU’s can work with a wide range of Gas injectors:RAIL, I-Plus, MATRIX, MAGIC JET, VALTEK, H2000, KEIHIN etc.with impendancy from 1 up to 6 Ohm.
Applying the latest technology of manufacturing with usage of the highest class of elements the systems are completely non-failure. Controller, harness, switch, pressure and temperature sensors are being tested twice carefully before they will leave the factory and warehouse, resulting in customer and installer satisfaction due to troubleless, fine working and long lasting vehicle gas installation. The software allows to adjust parameters of the fuel supply system in very large scale with extra functions for Start / Stop operation, Valvetronic engines, Mazda fuel strategies, Cut off and acceleration strategies, sequential fuel changover, auto adapativity to correct Gas adaptation through EOBD connection etc.
YGRAERIOKINISIYGRAERIOKINISILPG IN MOTIONLPG IN MOTION
LPG/CNG LPG/CNG EEnginengine CControlontrol UUnitsnitsAll our Gas-ECU’s are equipped with the most advancedand reliable technology available.
As a result we are able to offer the following warranty on our electronic control units (ECU’s) :
YK – S – Series - 2 Years warrantyELPIGAZ Systems - 2 Years warranty BARDOLINI or N.I.G.S - 2 Years warrantyEUROPEGAS Systems - up to 5 years warranty
Features:
• Fast Central Processing Unit up to 120/64 MHZ - 32 bit• Built in emulators with inner resistance up to 100 Ohm• Controlling Gas Injectors with resistance from 1 to 6 Ohm• High quality emulator wire set, with EOBD connection• Pressure sensor, Reducer temperature sensor • Fuel selector switch with LPG-level indication & buzzer • Installation and calibration software,• Manual- & Autocalibration• Possibility to adjust each Injector or Bank • Full automatic real time LPG injection adjustment
through EOBD signal
LPG/CNG Systems LPG/CNG Systems fromfrom ELPIGAZELPIGAZ
We are proud to represent ELPIGAZ in Greece.
ELPIGAZ is the representative of A.E.B Italy in Poland and one of Polandsleading manufacturer and supplier for LPG and CNG automotive applications.
Beside being authorized dealer of A.E.B Italy, ELPIGAZ offers a wide rangeof outstanding quality products incl. Polmocon (HIT/More&More) LPG tanks,Elpigaz Multivalves (produced by Tomasetto Italy) and truly powerfull and reliable Pressure Rgulators.
All products own and foreign are constantly tested and where applicableimproved. I.e. “Rail” Injectors are specially treated (piston coating) to improve performance and prolong duty cycles.
Direct, close contact to the main manufacturers of excellent LPG and CNG equipment and own production lines are the base for the outstanding success all over the world, based on customer satisfaction with productsand services.
Being Representative of ELPIGAZ in Greece enables us to provide the same excellent and professional products and services to our clients here.
Our clients profit from the obvious advantages of being supplied and serviced by an authorized, fully trained and supported representative of such company.
We proudly offer the full range of ELPIGAZ equipment incl. DEGAMIX (LPG/Diesel) Systems and POLMOCON Tanks.
For clients which demand regular bigger quantities we are able to place the order directly to the factory in Poland and they will be supplied and invoiced from ELPIGAZ Poland. After Sales Service will be provided from us !
All prices are ex warehouse Poland and for minimum 10 pcs. per order !Pick up from our warehouse in Athens + 30,- Euro plus V.A.TSingle Kits from Athens, please add 60,- Euro to the a.m. prices plus V.A.T !Single Kits 4DPI from Athens, please add 155,- Euro to the a.m. prices plus V.A.T !
AdvancedAdvanced IV Generation LPG IV Generation LPG EngineEngine KITKIT
4 Cyl. Engine Kit up to 160 HP
265,00 EUROplus VAT
Enginekit YK - S4 Series includes :
Pressure Reducer (190HP) , Injection Rail 1x4 cyl.(160HP), ECU – AEB MP48, switch with fuel level indicator, gaseous phase filter, assembling bag, wiring harness, gastemperature – vacuum – pressure sensor
ECU: sequential gas injection Electronic Control Unit, designed for vaporized injection of LPG or CNG (software configurable) for vehicles with advanced onboard petrol diagnostic systems (OBD2, EOBD), with catalytic converter and oxygen sensors. Operates within original emission limits (also EURO 5).
Features :Possibility to add regular fuel during gas-operation (no extra lubrication required),
Functions for Start/Stop operation, Valvetronic & Mazda LeaningAvailable version for engines 3 & 4 Cyl.
Engine Accessories KIT incl.Gasfilter 12mmWatertube 16mm -1,5m,Gastube 6mm – 2,0m, Gastube 12mm – 1,25m, Clamps, 2 x Water T 16/16/16
AdvancedAdvanced IV Generation LPG IV Generation LPG EngineEngine KITKIT
4 Cyl. EOBD Engine Kit up to 160 HP
345,00 EUROplus VAT
Engine-Kit YK - S4 Series – EOBD includes :
Pressure Reducer (190HP) , Injection Rail 1x4 cyl.(160HP), ECU–AEB 2001 NC, switch with fuel level indicator, gaseous phase filter, assembling bag, wiring harness, gastemperature – vacuum – pressure sensor
ECU: sequential gas injection Electronic Control Unit, designed for vaporized injection of LPG or CNG (software configurable) for vehicles with advanced onboard petrol diagnostic systems (OBD2, EOBD), with catalytic converter and oxygen sensors. Operates within original emission limits (also EURO 5).
Features :Works/corrects gas - injection using OBD parameters during gas-operation,shows and uses OBD parameters in diagnostic/ calibration software.Possibility to add regular fuel during gas-operation (no extra lubrication required).
Functions for Start/Stop operation, Valvetronic & Mazda LeaningAvailable version for engines 3 & 4 Cyl.
Engine Accessories KIT incl.Gasfilter 12mmWatertube 16mm - 1,5m,Gastube 6mm – 2,0m, Gastube 12mm – 1,25m, Clamps, 2 x Water T 16/16/16
AdvancedAdvanced IV Generation LPG IV Generation LPG EngineEngine KITKIT
5/6 Cyl. EOBD Engine Kit up to 240 HP
455,00 EUROplus VAT
Engine-Kit YK – S6 Series – EOBD includes :
Pressure Reducer (300HP) , Injection Rail 2x3 cyl.(240HP), ECU–AEB 2568 D, switch with fuel level indicator, gaseous phase filter, assembling bag, wiring harness, gastemperature – vacuum – pressure sensor
ECU: sequential gas injection Electronic Control Unit, designed for vaporized injection of LPG or CNG (software configurable) for vehicles with advanced onboard petrol diagnostic systems (OBD2, EOBD), with catalytic converter and oxygen sensors. Operates within original emission limits (also EURO 5).
Features :Works/corrects gas - injection using OBD parameters during gas-operation,shows and uses OBD parameters in diagnostic/ calibration software.Possibility to add regular fuel during gas-operation (no extra lubrication required).
Functions for Start/Stop operation, Valvetronic & Mazda LeaningAvailable version for engines 5 & 6 Cyl.
Engine Accessories KIT incl.Gasfilter 12mmWatertube 16mm - 1,5m,Gastube 6mm – 2,0m, Gastube 12mm – 1,5m, Clamps, 2 x Water T 16/16/16
AdvancedAdvanced IV Generation LPG IV Generation LPG EngineEngine KITKIT
8 Cyl. EOBD Engine Kit up to 300 HP
555,00 EUROplus VAT
Engine-Kit YK – S8 Series – EOBD includes :
Pressure Reducer (300HP) , Injection Rail 2x4 cyl.(320HP), ECU–AEB 2568 D, switch with fuel level indicator, gaseous phase filter, assembling bag, wiring harness, gastemperature – vacuum – pressure sensor
ECU: sequential gas injection Electronic Control Unit, designed for vaporized injection of LPG or CNG (software configurable) for vehicles with advanced onboard petrol diagnostic systems (OBD2, EOBD), with catalytic converter and oxygen sensors. Operates within original emission limits (also EURO 5).
Features :Works/corrects gas - injection using OBD parameters during gas-operation,shows and uses OBD parameters in diagnostic/ calibration software.Possibility to add regular fuel during gas-operation (no extra lubrication required).
Functions for Start/Stop operation, Valvetronic & Mazda LeaningAvailable version for 8 Cyl. engines
Engine Accessories KIT incl.Gasfilter 12mmWatertube 16mm - 1,5m,Gastube 6mm – 2,0m, Gastube 12mm – 1,5m, Clamps, 2 x Water T 16/16/16
SEQUENTIAL GAS INJECTION SYSTEM OSCAR-N
„OSCAR-N S" is a microprocessor based gas
injection controller. It is mainly desinged for modern cars, which have technologically advanced OBD2 systems however it might be also used in older types of cars. Thanks to itsmodern construction and highly efficient CPUit gives posibillitis to fullfill strict emission exhaust norms, keeping the driving dynamic and performance identical to the one on petrol.
In "OSCAR-N PLUS" controller unique algorithms of controlling LPG injectors have been used. Injection opening time for each gas injector is being calculated individually, in real time, based on injection opening time of the petrol injector corresponding to it. Thanks to that solution efficiency and dynamics of driving on gas are practical identical to the one on petrol.
Another advantage of that solution is the fact that the controller works without anyproblem with vehicle engines like HEMI (part of cylinders are being temporarily turned off during work), Valvetronik (constant value of vacuum in the inlet manifold) and cars which are having opening time differences between individual injectors (Subaru).
„OSCAR-N PLUS” can work with wide range of injectors: RAILGAS, RAIL, REG, MATRIX, MAGIC JET, VALTEK, PLANIJET, H2000, KEIHIN of impendancyfrom 1 up to 6 Ohm.
It is the smallest device on the market of sequential injection gas system, whichcan control up to 8 cylinders. 100% waterproof aluminium case dimensions are: 130 (length) x 100 mm (width) x 28 mm (thickness).
Thanks to the anti-surtension protection devices build on the printed circuitboard and latest technology of manufacturing with usage of the highestclass of elements, the system is completely non-failure. Controller, harness,switch, pressure- and temperature sensors are being tested twicecarefully before they leave the factory and warehouse. In effect we,the customer and the installer is happy due to troubleless, fine working and long lasting autogas installations.
The software makes it possible to adjust the parameters of the fuel supplysystem in a very large scale. Besides the correction due the vacuum in theintake manifold, installer can adjust gas dosage according to RPM level. It is also possible to adjust mixture dosage for each cylinder separately and there is the possibility of preheating the gas injectors before changeover.
OSCAR-N kit has passed the Abgasgutachten tests (regarding homologations ECE 115) and it is installed on the territory ofGermany. We still enlarge the list of cars which successfully passes thedemanding tests. The results that we are getting confirm high quality andthe technological advantage of our System.
The „OSCAR-N PLUS” kit contains: � LPG/CNG injection controller „OSCAR-N PLUS” in 4, 6 or 8 cylinder
version,� Emulator wire set fitted with plugs type Europe Bosch (SA144) or
Japanese (SA144J),� pressure and vacuum sensor (mapsensor)� reducer temperature sensor and measurement tee� fuel selector switch with a LPG-level full indication� buzzer� LPG level indicator with wire set,� Installation and calibration manual and software,� small fastening elements,
SEQUENTIAL GAS INJECTION SYSTEM OSCAR-N PlUS
IV Generation LPG IV Generation LPG EngineEngine KITKIT3 or 4 Cyl. Engine Kit OSCAR-N up to 160 HP
includes GAS-ECU, Vaccum-,Gaspressure-Watertemperature-, Gastemperature, Gas-Level-Sensor, wiringharness,Switch & Buzzer
LPG Pressure Reducer N.I.G.Sup to 190 HPWaterunion 16mm, Gasunion 12mm
Vacuumunion 4mm, mounting material
3 Cyl or 4 Cyl. Injector Railup to 40 HP per Cyl. Gasunion 12mm, electrical connector AMP, nozzle set
Dry Gas Filter – High CapacityGasunion 12/12mm
Engine Accessories KIT incl. Watertube 16mm - 1,5m,Gastube 6mm – 2,0m, Gastube 12mm – 1,25m, Clamps,2 x Water T 16/16/16,
321,00 EUROplus VAT
AdvancedAdvanced IV Generation LPG IV Generation LPG EngineEngine KITKIT
3 or 4 Cyl. Engine Kit EOBD CAN up to 160 HP
GAS-ECU OSCAR-N OBD CAN 4 Cyl.Vaccum-, Gaspressure-, Watertemperature-, Gastemperature, Gas-Level-Sensor, wiringharness, Switch & Buzzer
LPG Pressure Reducer 190 HPWaterunion 16mm, Gasunion 12mm, Vacuumunion 5mm, mounting material
3 Cyl or 4 Cyl. Injector Rail IG 1up to 40 HP per Cyl. Gasunion 12mm, electrical connector AMP, nozzle set
331,00 EUROplus VAT
Engine Accessories KIT incl.Gasfilter 12mmWatertube 16mm – 1,5m, Gastube 6mm – 2,0m, Gastube 12mm – 1,25m,
Clamps,2 x Water T 16/16/16
AdvancedAdvanced IV Generation LPG IV Generation LPG EngineEngine KITKIT
5 or 6 Cyl. Engine Kit OBD CAN up to 300 HP
GAS-ECU OSCAR-N OBD CAN 6 Cyl.Vacuum-, Gaspressure-, Watertemperature-, Gastemperature, Gas-Level-Sensor, wiringharness, Switch & Buzzer
LPG Pressure Reducer EG280 HP or Gama01 300HPWaterunion 16mm, Gasunion 12mm, Vacuumunion 4mm, mounting material
600,00 EUROplus VAT
2 x 3 Cyl Injector Rail IG 3 HORIZON
or HANA 2000 up to 60 HP per Cyl.Gasunion 12mm, electrical connector AMP, nozzle set
Engine Accessories KIT incl.Gasfilter 12mm in - 2 x 12mm out Watertube 16mm - 1,5m,Gastube 6mm – 2,5m, Gastube 12mm – 2,0m, Clamps,2 x Water T 16/16/16
AdvancedAdvanced IV Generation LPG IV Generation LPG EngineEngine KITKIT
8 Cyl. Engine Kit OBD CAN up to 300 HP
GAS-ECU OSCAR-N OBD CAN 8 Cyl.Vaccum-, Gaspressure-, Watertemperature-, Gastemperature, Gas-Level-Sensor, wiringharness, Switch & Buzzer
692,00 EUROplus VAT
LPG Pressure Reducer EG280 HP or Gama01 300HPWaterunion 16mm, Gasunion 12mm, Vacuumunion 4mm, mounting material
2 x 4 Cyl Injector Rail IG 3 HORIZON or HANA 2000 up to 60 HP per Cyl. Gasunion 12mm, electrical connector AMP, nozzle set
Engine Accessories KIT incl.Gasfilter 12mm in - 2 x 12mm out Watertube 16mm - 1,5m,Gastube 6mm – 3,0m, Gastube 12mm – 2,0m, Clamps, 2 x Water T 16/16/16
AdvancedAdvanced IV Generation LPG SystemsIV Generation LPG Systems
LPG/CNG ECU (Electronic Control Unit)
3 / 4 Cyl. E - Kit OSCAR MINI 160,00 plus VAT
3 / 4 Cyl. E - Kit OSCAR-N 197,00 plus VAT
5 / 6 Cyl. E - Kit OSCAR-N 207,50 plus VAT
8 Cyl. E - Kit OSCAR-N 238,75 plus VAT
All E-KITs are equipped with :Wiringharness, Vaccum-, Gaspressure-, Watertemperature-, Gastemperature Sensor, Switch & Buzzer
OSCAR – EOBD instead of OSCAR-N + 18,- plus VAT
3 / 4 Cyl. E - Kit MP48 - AEB
3 / 4 Cyl. E - Kit 2001 NC - AEB
5 / 6 Cyl. E - Kit 2568 D - AEB
8 Cyl. E - Kit 2568 D - AEB
185,00 plus VAT
225,00 plus VAT
285,00 plus VAT
325,00 plus VAT
AdvancedAdvanced IV Generation LPG SystemsIV Generation LPG SystemsLPG/CNG Pressure Regulators for injection Systems
EG Pressure Regulator
EG - 150KW (200HP)
EG - 200KW (280HP)
EG - 110KW (150HP) 65,00 Euro plus VAT
80,00 Euro plus VAT
90,00 Euro plus VAT
LPG pressure regulator type EG® is designed for supplying vehicle gas injection systems. It's a one step diaphragm pressure regulator. It's intended to evaporate a liquid mixture of propane-butane (LPG) and to reduce the pressure of vaporisedgas.Value of pressure outgoing from the reducer is regulated by a spring which ispressing the diaphragm. The force of affect of that spring is regulated by a pressure regulation screw. Regulator's task is to hold the intended pressure difference between pressure of gas in the pressure regulator outlet and the pressure in the car suction manifold stable. This effect is performed by connecting the pressure regulator and the car suction manifold by a vacuum probe. The value of that pressure difference can be regulated in a range from 0,95 bar– 1,2 bar. In our offer we have reducers type EG-mini, EG-110kW, EG-150kW, EG-200kW for engines with adequate power up of: 150, 200, 280 HP.
AdvancedAdvanced IV Generation LPG SystemsIV Generation LPG Systems
MAGIC 3 Pressure Regulator
MAGIC3 - 250HP
MAGIC3 - 200HP 64,50 Euro plus VAT
95,00 Euro plus VAT
LPG pressure regulator type MAGIC3® is designed for supplying vehiclesequential gas injection systems. Innovative construction, which is protected by patent law, ensures excellentheat and pressure efficiency. The "increasing pressure during cut-off effect" has been practically eliminated in this reducer. Original shape and small dimensions makes it possible to install it in vehicleswhich don't have much free space in the engine compartment. The value of pressure in the reducer is regulated thanks to the regulation screwin range from 0,8 to 1,6 bar. MAGIC3® reducer with one gas outlet ensures optimal efficiency for cars withengine power up to 250 HP. If we install second gas outlet reducer it capableto operate with cars with engine power up to 350 HP. Thanks to the possibilityof adding second gas outlet, the necessity of installing a second reducer in cars with most powerful engines has been eliminated. That solution savescustomer's money and installer's time.
LPG/CNG Pressure Regulators for injection Systems
AdvancedAdvanced IV Generation LPG SystemsIV Generation LPG Systems
LPG/CNG Gasinjectors / Injector Rails
IG 1 Injector Rail 3 Cyl.
Rail injector for gaseous LPG and Natural Gas. Single version with 0.6 mm stroke. Coils with 2-way built-in watertight connector, compatible with Amp/Delphi. Body made of shaped, blue anodized aluminium lightened for better heat exchange and marked with laser. Protective caps on coils, on inlet connector and on gas outlet threaded holes. Plunger material specific for injectors and covered with wear-resistant treatments. Not very sensitive to dirt accumulation, easy maintenance and easy to clean. Improved internal flow dynamics.
Technical features: Working pressure: 0,5 to 2 barMaximum pressure: 3 barPower supply 12VGas supply: rubber hose ø12 mmGas outlet: calibrate nozzle M6x1Calibrating nozzle orifice: 1,0 – 3,5 mm (of 0,25 mm)Temperature range: -20 / + 120 °CMinimum injection pulse : 3,3msCertificates, approvals: 67R-01 / 110R-00
IG 1 Injector Rail 4 Cyl.
38,00 Euro plus VAT
45,00 Euro plus VAT
IG 5 Injector Rail 3 Cyl. 38,00 Euro plus VAT
IG 5 Injector Rail 4 Cyl. 45,00 Euro plus VAT
AdvancedAdvanced IV Generation LPG SystemsIV Generation LPG Systems
LPG/CNG Gasinjectors / Injector Rails
Valtek type Injector Rail 3 Cyl.
LPG/CNG Injection Rail, gaseous phase, for calibrated exchangeable Nozzles, coils with incorporated connector compatible with Amp/Delphi superseal 1,5mm, tightness IP 54, body in extruded anodized Aluminium,standard valve seat Ø 4mm, gas inlet options from either side, one of which bolted, connections for rubber hose internal Ø 12mm. Good performance even with dirty LPG and without fitting a protective filter, simple maintenance and compact overall dimensions. Excellent silent running.Max. Working Pressure: 2,45 BarMinimum Injection Pulse : 3,25 msImpedancy : 3 OhmCalibrating nozzle orifice : 1,0 – 3,5 mm (of 0,25 mm)Temperature range : -20 / + 120 °°°°CCertificates, approvals : 67R-01 / 110R-00
Valtek type Injector Rail 4 Cyl.
32,50 Euro
40,00 Euro
Valtek type Injector Rail 2 Cyl. 25,00 Euro
All prices plus VAT
AdvancedAdvanced IV Generation LPG SystemsIV Generation LPG Systems
LPG/CNG Gasinjectors / Injector Rails
IG3 Horizon Inj. Rail 3 Cyl. 85,00 Euro
115,00 EuroIG3 Horizon Inj. Rail 4 Cyl.
“IG 3 Horizon" It is very quick and exact injector with adjust of stroke and calibration of volume possibility by changing fittings in the outputnozzle. The design of the injector enables its very precise function also with low temperatures and bad gas quality. It is possible to use each injectors seperate without Rail– no central holder need. The injectors are delivered with standard inside nozzle d. 1,5 mm. All other nozzles can be delivered to order of customer. (we recommend because of the excellent performance and relativlylow price standard usage of it).
Product life expectancy >250 000 000 cycles >200 000 kmOperating response time (+12V DC) 2,0ms ± 0,2 ms (1Bar rel. air)Closing response time 2ms ± 0,2 ms (1Bar rel. air)Operating temperature range -20°C ÷ 120°CLubrication Not requiredOperating pressure range 0,5 ÷ 4,5 Bar
Pressure response time P0 -> Pmax< 1,0 ms (1Bar rel air)Minimum Injection Pulse : 2,3ms
All prices plus VAT
AdvancedAdvanced IV Generation LPG SystemsIV Generation LPG Systems
LPG/CNG Gasinjectors / Injector Rails
HANA 2000 Inj. 3 Cyl. 100,11 Euro
133,48 EuroHANA 2000 Inj. 4 Cyl.
“HANA Injectors" are very quick and precise injector No changing of fittings in the output nozzle required. The design of the injector enables its very precise function also with low temperatures and bad gas quality. It is possible to use each injectors seperate without Rail– no central holder need.The injectors come in 4 different power classes.We recommend use of it because of the excellent performance and relatively low price.
Product life expectancy >250 000 000 cycles >200 000 kmOperating response time (+12V DC) 2,0ms ± 0,2 ms (1Bar rel. air)Closing response time 1,2ms ± 0,2 ms (1Bar rel. air)Operating temperature range -20°C ÷ 120°CLubrication Not requiredOperating pressure range 0,5 ÷ 3,5 Bar
Flow rate = 130L -> 170L /min +/- 1,5L
All prices without VAT
HANA 2000 Inj. 2 Cyl.
HANA 2000 Inj. 1 Cyl. 33,37 Euro
66,74 Euro
HANA 2000 Rail for 3 or 4 Cyl. 18,75 Euro
HANA 2000 adapter wire for AMP 4,12 Euro
AdvancedAdvanced IV Generation LPG SystemsIV Generation LPG Systems
LPG Multivalves
Multivalve standard 35,00 Euro
55,00 EuroMultivalve ELPIGAZ
High flow capacity LPG Multivalve - possible thermoplastic connectionsStandard of reference : ECE 67R 01Safety type : Pressure relieve valve-thermal safety-excess-flow deviceNotes : 80% filling limiter - Non-return valve – 12 V Solenoid valve double stage
- Manual tap Max working pressure : 30 bar
All prices without VAT
Multivalve BRC 55,00 EuroMultivalve Tomasetto/OMB 55,00 Euro
AdvancedAdvanced IV Generation LPG SystemsIV Generation LPG Systems
LPG Multivalves
Multivalve high flow 65,60 Euro
MTV for torrodial LPG Tanks :
MTV T 180 - 190 30/37MTV T 200 - 225 30/37MTV T 230 30/37MTV T 240 – 250 30/37MTV T 270 30/37MTV T 300 30/37
MTV for cylinder LPG Tanks :
MTV C 200 30/90/0MTV C 244 30/90/0 MTV C 270 30/90/0MTV C 300 30/90/0 MTV C 315 30/90/0MTV C 360 30/90/0MTV C 400 30/90/0
Connection inlet port - M12 x 1 (8mm Pipe connection)Connection outlet port - Standard M10 x 1 (6mm Pipe connection)
- High Flow M12 x 1 (8mm Pipe connection)
In Greece we recommend the use of high flow Multivalvesfor vehicles with petrol consumption > 12L/100km !
High flow Multivalves have a outlet (M12*1) with the possibilityto connect 8mm high pressure pipes !
All prices without VAT
High Flow Multivalves are available from Elpigaz, Tomasetto, OMB and BRC
AdvancedAdvanced IV Generation LPG SystemsIV Generation LPG Systems
LPG flexible Thermoplastic High Pressure Pipes
Thermoplastic Pipe 6mm / m 1,80 Euro
2,80 EuroThermoplastic Pipe 8mm / m
Thermoplastic flexible hose diameter 6x1 mm or 8x1 mm in accordance with the European standard R 67-01, for LPG systems. Available in Kits of 6 m rolls with connection fittings or in rolls of25 m with fittings sold separately.
A kit of Thermoplastic flexible high pressure tubes consists of :
Kit 1:1 x Roll 6m – 6mm with connectors M10 x 1 inline1 x Roll 2m – 8mm with connectors M12 x 1 inline
Kit 2:1 x Roll 8m – 8mm with connectors M12 x 1 inline
KiT 1 price : 22,10 Euro KiT 2 price : 29,90 Euro
All prices without VAT
In modern LPG installations flexible Thermoplastic high pressure tubes are used instead of copper pipes. Due to their high flexibility and low weight they allow easy and save
installations (i.e in the original fittings for petrol fuel lines) with a professional OEM like look.
AdvancedAdvanced IV Generation LPG SystemsIV Generation LPG Systems
Fittings for LPG Thermoplastic High Pressure Pipes
All prices without VAT
Elbow 6mm (M10x1) – 6mm pipe
Elbow 8mm (M12x1) - 8mm pipe
Nut 6mm pipe
Nut 8mm pipe
Olive 6mm pipe
Olive 8mm pipe
Elbow 6mm (M10x1) - 8mm pipe
Possible connection for thermplastic tubes
Inline fitting for 6mm pipe 1,89 Euro
Inline fitting for 8mm pipe 2,19 Euro
Inline fitting for 8mm pipe 2,89 Eurowith 6mm connection
3,25 Euro
3,25 Euro
3,25 Euro
0,66 Euro
0,77 Euro
0,55 Euro
0,55 Euro
Other types of connectionMaterial for thermoplasticpipes available on request
AdvancedAdvanced IV Generation LPG SystemsIV Generation LPG Systems
High Quality automotive LPG Tanks
All prices without VAT
We provide highest quality LPG Tanks from POLMOCON Poland or TMS Turkey.They offers a very wide range of all type of automotive LPG Tanks with superiorQuality of steel and welding machinery. As a result specialy POLMOCON tanksare of low weight (20 -30 % less then comparable products) with maximumfilling capability. All Tanks are provided with fastening elements.
Torodial tanks intern (30 degree):
Diameter/Diameter/
HeightHeightmmmm
565565 580580 600600 630630 650650 680680
18018034L34L
81,00 81,00 €€XX XX XX XX XX
19019036L36L
81,00 81,00 €€
37L37L
81,00 81,00 €€
39L39L
81,00 81,00 €€
45L45L
84,00 84,00 €€
48L48L
103,00 103,00 €€
51L51L
114,00 114,00 €€
20020038L38L
81,00 81,00 €€
39L39L
81,00 81,00 €€
43L43L
83,00 83,00 €€
48L48L
84,00 84,00 €€
51L51L
103,00 103,00 €€
55L55L
114,00 114,00 €€
22022042L42L
87,00 87,00 €€
44L44L
81,00 81,00 €€
48L48L
83,00 83,00 €€
54L54L
84,00 84,00 €€
57L57L
105,00 105,00 €€
59L59L
114,00 114,00 €€
240/250240/25046L46L
91,00 91,00 €€
49L/51L49L/51L
91,00 91,00 €€
53L/54L53L/54L
87,00 87,00 €€
59L59L
96,00 96,00 €€
63L/65L63L/65L
109,00 109,00 €€
66L/70L66L/70L
114,00 114,00 €€
270270 XX XX60L60L
87,00 87,00 €€
68L68L
96,00 96,00 €€
72L72L
110,00 110,00 €€
78L78L
117,00 117,00 €€
300300 XX XX68L68L
103,00 103,00 €€
76L76L
107,00 107,00 €€
81L81L
127,00 127,00 €€
88L88L
132,00 132,00 €€
All prices in Euro without VAT
High Quality automotive LPG Tanks
Torodial tanks intern (30 degree):
Diameter/Diameter/
HeightHeight mmmm565565 580580 600600 630630 650650 680680
18018034L34L
81,00 81,00 €€XX XX XX XX XX
19019036L36L
81,00 81,00 €€
37L37L
81,00 81,00 €€
39L39L
81,00 81,00 €€
45L45L
84,00 84,00 €€
48L48L
103,00 103,00 €€
51L51L
114,00 114,00 €€
20020038L38L
81,00 81,00 €€
39L39L
81,00 81,00 €€
43L43L
83,00 83,00 €€
48L48L
84,00 84,00 €€
51L51L
103,00 103,00 €€
55L55L
114,00 114,00 €€
22022042L42L
87,00 87,00 €€
44L44L
81,00 81,00 €€
48L48L
83,00 83,00 €€
54L54L
84,00 84,00 €€
57L57L
105,00 105,00 €€
59L59L
114,00 114,00 €€
240/250240/25046L46L
91,00 91,00 €€
49L/51L49L/51L
91,00 91,00 €€
53L/54L53L/54L
87,00 87,00 €€
59L59L
96,00 96,00 €€
63L/65L63L/65L
109,00 109,00 €€
66L/70L66L/70L
114,00 114,00 €€
270270 XX XX60L60L
87,00 87,00 €€
68L68L
96,00 96,00 €€
72L72L
110,00 110,00 €€
78L78L
117,00 117,00 €€
300300 XX XX68L68L
103,00 103,00 €€
76L76L
107,00 107,00 €€
81L81L
127,00 127,00 €€
88L88L
132,00 132,00 €€
All prices in Euro without VAT
High Quality automotive LPG Tanks
Torodial tanks extern (0 degree):
Diameter/
Heightmm
565 580 600 630 650 680
18041L
103,00 €43L
103,00 €X
50L
112,00 €56L
112,00 €60L
127,00 €
190 X46L
105,00 €51L
115,00 €X X X
20045L
104,00 €49L
104,00 €52L
117,00 €56L
119,00 €62L
119,00 €67L
129,00 €
22049L
107,00 €55L
107,00 €56L
159,20 €63L
128,00 €66L
138,00 €78L
154,00 €
24055L
113,00 €59L
123,00 €60L
134,00 €73L
142,00 €74L
148,00 €85L
167,00 €
270 X67L
133,00 €71L
133,00 €79L
151,00 €85L
164,00 €95L
178,00 €
300 X X X90L
168,00 €95L
178,00 €108L
196,00 €
All prices in Euro without VAT
High Quality automotive LPG Tanks
Torodial full tanks extern (0 degree):
All prices without VAT
High Quality automotive LPG Tanks
Cylinder Tanks :
Diameter/Length Liter Price Diameter/Length Liter Price
270
700 35L 56.00 € 585 50L 60.00 €
880 45L 59.00 € 685 60L 64.00 €
970 49L 61.00 € 735 65L 67.00 €
1050 52L 63.00 € 785 70L 70.00 €
1150 60L 67.00 € 840 75L 73.00 €
300
720 45L 57.00 € 890 80L 75.00 €
870 55L 63.00 € 990 90L 78.00 €
945 60L 66.00 € 1090 100L 83.00 €
1020 65L 69.00 € X 100L X
1090 70L 73.00 € X 120L X
X 140L X
535535 35L35L 54.00 54.00 €€
670670 45L45L 57.00 57.00 €€
805805 55L55L 63.00 63.00 €€
315315 870870 60L60L 65.00 65.00 €€
930930 65L65L 67.00 67.00 €€
10701070 75L75L 73.00 73.00 €€
11351135 80L80L 78.00 78.00 €€
Other diametersand up to 360L available,
please contact us
Mounting frameis not included in a.m.prices !
360
400
Diameter/Diameter/
HeightHeightmmmm
565565 580580 600600 630630 650650 680680
18018034L34L
129,45 129,45 €€
35L35L
131,54 131,54 €€XX
44L44L
139,19 139,19 €€
46L46L
143,37 143,37 €€
53L53L
168,42 168,42 €€
190190 XX37L37L
132,23 132,23 €€
41L41L
141,38 141,38 €€XX XX XX
20020038L38L
140,58 140,58 €€
39L39L
140,58 140,58 €€
43L43L
143,37 143,37 €€
48L48L
145,45 145,45 €€
52L52L
144,76 144,76 €€
59L59L
170,51 170,51 €€
22022042L42L
143,37 143,37 €€
44L44L
144,06 144,06 €€
48L48L
145,45 145,45 €€
53L53L
154,50 154,50 €€
57L57L
154,50 154,50 €€
69L69L
195,56 195,56 €€
24024048L48L
149,63 149,63 €€
48L48L
149,63 149,63 €€
52L52L
151,02 151,02 €€
60L60L
158,68 158,68 €€
65L65L
164,94 164,94 €€
71L71L
198,35 198,35 €€
270270 XX54L54L
160,07 160,07 €€
58L58L
159,37 159,37 €€
68L68L
177,47 177,47 €€
73L73L
180,95 180,95 €€
84L84L
219,23 219,23 €€
300300 XX XX XX76L76L
185,12 185,12 €€
82L82L
187,91 187,91 €€XX
All prices in Euro without VAT
High Quality automotive LPG Tanks
Torodial tanks vertikal:
Vertikal Tanks are offered without fitting material and without multivalve.Additional cost for ball joints and fitting material 41,25 Euro / per tank.Multivalve for vertikal tanks 85,- Euro.
Offer under investigation !
All prices in Euro without VAT
High Quality LPG Equipment
SEMPERIT and FAGUMIT rubber conduits (D4 – D19mm) ECE R 67 / R 110 certification class2 gas hoses
Gas hose D 5mm / m 2,77 Euro
Gas hose D 6mm / m 2,97 Euro
Gas hose D 12mm / m 3,49 Euro
Protective pipe D 30mm / m 1,65 Euro
Protective pipe D 32mm / m 1,75 Euro
LPG Filling point outside compl. 8,25 EuroLPG Filling point fuel flap compl. 14,25 Euro
LPG standard adapter “Europe” 7,43 Euro
LPG long adapter “Europe” 9,08 Euro
Vapor BOX for Multivalves 4,25 Euro
Electronic Gas Detector GD 3300 155,00 Euro
Electronic Gas Detector “mini” 123,75 Euro
OSCAR-N Interface wire - USB 25,00 Euro
AEB Interface wire – USB 65,00 Euro
Tape textile – high quality 19mm x 25m 1.86 Eurofor automotive use
Protective pipe ”sliced” D 12mm/m 2,65 Euro
YGRAERIOKINISI YGRAERIOKINISI -- LPG IN MOTIONLPG IN MOTIONIf you are looking for products which are not in our catalogue, If you are looking for products which are not in our catalogue, please do not hesitate toplease do not hesitate to
contact us. This catalogue does not represent the complete rangecontact us. This catalogue does not represent the complete range of products we areof products we are
able to offer. For products not yet available from us, our stafable to offer. For products not yet available from us, our staff will try to find thef will try to find the
product and provide you with an offer. Please do not hesitate anproduct and provide you with an offer. Please do not hesitate and visit us at d visit us at
www.ygraeriokinisi.comwww.ygraeriokinisi.com or a.m. manufactures on their websites for further or a.m. manufactures on their websites for further
information on products and news.information on products and news.
We are located in :We are located in :
PissaPissa EfstratiouEfstratiou 1717--1919
117 45 117 45 NeosNeos KosmosKosmos
Athens Athens –– GreeceGreece
Please contact us under :Please contact us under :
[email protected]@ygraeriokinisi.com
Tel.: 0030 210 92 30 498Tel.: 0030 210 92 30 498
Fax: 0030 210 92 30 498Fax: 0030 210 92 30 498
Mobile : 0030 6981 22 32 34Mobile : 0030 6981 22 32 34
0030 6947 90 0030 6947 90 9090 3333
Please pay special attention to our Partnership Program.Through the Partnership Program we can provide you with specialrates on our products !