Manual Land Cruiser Prado

MEMBERS:YEFERSON RESTREPO QUIROZANDRES FELIPE RESTREPO QUIROZ.

A)SEGURITY AND CONFORTB) INTRUMENTS AND CONTROLC) INSTRUTION FOR OPERATIOND) SERVICE AND MAINTENANCE

SUMARY

AIRBAG. It is a passive safety system installed in most modern

cars. Its function is, in a collision, the air bags cushion the impact of vehicle occupants against the steering wheel, dashboard and windshield if the front airbag and against windows, its use can reduce the risk of death by 30%.

SEGUTITY AND COMFORT

SEAT BELT A seat belt is a harness designed to restrain an occupant of a vehicle if a collision occurs and keep his seat. The objective of safety belts is minimize injuries in a collision, preventing the passenger from hitting hard interior elements or against people in the row above, and is thrown out of the vehicle.

STEERING SYSTEMTo drive the car required some kind of mechanism to turn the front wheels so that the vehicle can be oriented in the desired direction. To this end, the steering wheel is coupled by means of gears and levers to the front wheels.

INTRUMENTS AND CONTROL

BRAKE SYSTEMThe brake system is designed so that through the operation of its components can stop the vehicle at the driver's will.The basis of operation of the brake system's main power transmission via a fluid which expands the pressure exerted by the driver to stop the car to achieve the least possible effort.

INSTRUCTION FOR OPERATION

AUTO IGNITIONTo turn the car just press the clutch or clutch pedal, check that the lever is in neutral and turn the key in the sense clockwise until you hear it and immediately turned on the key and release the clutch release .

START THE AUTOThe clutch serves to collect and separate the engine and wheels the box, so this helps the engine forces the vehicle forward. That is when we are going to get the clutch motor movement to the tires. Pressing the accelerator are doing to enter more mix of air and fuel into the engine, therefore more force open. To make it easier to start the print must sufficient acceleration for the car starts running. That is, if the car shakes, help accelerate a bit, but be careful not to overdo the acceleration. In sum which accelerates engine operation has a sound stable at all times.

OIL CHANGEfirst remove the oil cap, removed the oil filter, we will exchange the new filter, then moved to remove the cap from where it exits carter oil old when we leave again put the oil plug carter. finally we take the new oil and put the oil cap.

SERVICE AND MAINTENANCE

Brake fluid changefirst loosen the nut, a hose is placed where the nut will be passed to pump the brake pedal as this causes the brake fluid that is old out through the hose, but we must be very careful with the brake fluid level in the jar, as it exits the coolant is made the new liquid, when it is passed to the next round must be held down the brake pedal and tighten the nut. and so the same process is repeated for the next round.