7/27/2019 Y1 TV USER MENU 2011-05-30

1/15

7/27/2019 Y1 TV USER MENU 2011-05-30

2/15

- 1 -

FCC and CE Radiation Norm

FCC

This equipment has been tested and found to comply with limits for Class B digital device

pursuant to Part 15 of Federal Communications Commission (FCC) rules.

CE

This equipment has been tested and found to comply with the limits of the European

Council Directive on the approximation of the law of the member states relating to

electromagnetic compatibility (89/336/EEC) according to EN55022 Class B.

FCC and CE Compliance Statement

These limits are designed to provide reasonable protection against frequency interference

in residential installation. This equipment can generate, use and radiate radio frequency

energy, and if not installed or used in accordance with the instructions, may cause harmful

interference to radio communication. However, there is no guarantee that interference will

not occur in television reception, which can be determined by turning the equipment off and

on. The user is encouraged to try and correct the interference by one or more of the

following measures:

l Reorient or relocate the receiving antennal Increase the separation between the equipment and the receiver

l Connect the equipment into an outlet on a circuit different from

which the receiver is connected to .

Caution!The federal Communications Commission warns the user that changes or modifications to

the unit not expressly approved by the party responsible for compliance could void the

users authority to operate the equipment.

7/27/2019 Y1 TV USER MENU 2011-05-30

3/15

- 2 -

Precaution

Read all of these instructions and save this manual for later use. Follow all

warnings and instructions on the product.

1. Do not cover or block the ventilation holes in the case.

2. Do not insert sharp objects or spill liquid into the LCD monitor through the cabinet slots;

this may cause accidental fire, electric shock or failure.

3. Unplug the unit when not in use for an extended period.

4. Do not attempt to service this product yourself, as opening or removing the cover may

expose you to potential electric shock. Only a qualified technician should service this

product.

5. Do not touch the screen directly with your fingers as it may damage the screen ; the oil

from your skin is difficult to remove.

6. Do not apply pressure to the screen, the LCD is very delicate.

7. Keep the monitor away from extreme heat, cold or humid places.

8. Do not place directly under sunlight, dusty surroundings or near equipment, which may

generate strong magnetic fields.

9. Please keep at least 2 seconds between each time turn ON/OFF the monitor.

7/27/2019 Y1 TV USER MENU 2011-05-30

4/15

- 3 -

Installing the Monitor

l DO NOT install the monitor where sudden temperature changes may occur, or in humid,

dusty, or smoky areas as it may cause fire, electric shock or damage.

l DO NOT place your LCD Monitor near a window as it may be severely damaged if

exposed to rain, water, moisture, or sunlight.

l Maintain good ventilation; covering of ventilation slots or holes may cause fire.

l Place the monitor at least 4!(or 10 cm) away from the walls

l Safe storage temperature of the LCD Monitor is in a range of -20 to +65"C

Connecting the monitor

1. Turn off your PC and the LCD Monitor before connecting your LCD monitor to the PC.

2. Use VGA cable to connect the VGA connector of the LCD Monitor to the VGA port of the

PC system. Make sure the cable head is securely connected.

Connection cable (20/30 Series)

Display Cable

1. Power Cord

2. VGA Cable

3. Audio Cable

*Before the following steps, Please turn off your computer!

1> Connect the power cord rightly

2> Connect the VGA Cable rightly

3> Turn on your computer, and then turn on your LCD Monitor

7/27/2019 Y1 TV USER MENU 2011-05-30

5/15

- 4 -

Video Cable

1. Power Cord

2. 3.5!stereo to RCA*2 Audio cable(red/white)

---I/O Name:AUDIO IN

3. Video cable(yellow)

--- I/O Name:VIDEO

TV Cable

1. Power card

2. TV signal cable

---I/O Name:ANT

7/27/2019 Y1 TV USER MENU 2011-05-30

6/15

7/27/2019 Y1 TV USER MENU 2011-05-30

7/15

- 6 -

Menu Control Button20/30 Series"

CH-1. Channel selection down

2. Move the selector light-bar down.

CH+1. Channel selection Up

2. Move the selector light-bar Up.

MENU1. Open the OSD. (On Screen Display)

2. Back to previous levelto select another function.

POWER

1. Turn ON/OFF the monitor.2. Indicate the status of the monitor.

Power On : Blue Light.

Power Saving : Red Light.

-1. Decrease the values of the selected function.

2. When OSD is not on the screen , push #-!for volume adjustment

+

1. Increase the values of the selected function.

2. When OSD not on the screen , push #+!for volume adjustment

3. Select the highlighted function.

AV/TV VGA/AV / TV switch, Press!+!to confirm.

7/27/2019 Y1 TV USER MENU 2011-05-30

8/15

- 7 -

Menu Control ButtonY1 Series"

MENU 1. Open the OSD. (On Screen Display)2. Back to previous levelto select another function.

CH-1. Channel selection down

2. Move the selector light-bar down.

CH+1. Channel selection Up

2. Move the selector light-bar Up.

-1. Decrease the values of the selected function.

2. When OSD is not on the screen , push#-!for volume adjustment

+

1. Increase the values of the selected function.

2. When OSD not on the screen , push #+!for volume adjustment

3. Select the highlighted function.

Source Source switch, Press!+!to confirm.

POWER

1. Turn ON/OFF the monitor.

2. Indicate the status of the monitor.

Power On : Blue Light.

Power Saving : Red Light.

7/27/2019 Y1 TV USER MENU 2011-05-30

9/15

- 8 -

Menu Operating Instruction

Your LCD monitor allows you to easily adjust the characteristics of the image being

displayed.All of these adjustments are made by using the control buttons on the monitor

or the remote. While you adjust the controls, the OSD (On Screen Display) shows you

their numeric values as they change.

Direct Access Features

1. Push #AUTO! can get the optimal image (Only for VGA Mode).

2. When the OSD off, push the #MENU!button to display the main OSD menu.

3. Use #CH+!#CH-! buttons to select the function, and press the #+! button once to

activate the selected function.

4. After selecting a function, use the#+!#-!buttons to make necessary adjustments. The

setting bar moves and the numeric value indicator changes to reflect your adjustments.

5. Push #MENU!can return the main menu to select another function or to exit from the

OSD. The new settings will be automatically saved.

On Screen Display (20/30 Series)

Push #MENU!button enter #OSD!function selection

1. Picture 2. Sound

3. Setting 4. Channel!TV"

7/27/2019 Y1 TV USER MENU 2011-05-30

10/15

- 9 -

5. Geometry 6. Source

Function description#

Function Function Description

1.Picture

Picture Mode Standard#Soft#User#Bright

Brightness Adjust the brightness scale

Contrast Adjust the contrast scale

Hue Adjust the display hue

Saturation Adjust the display color saturation

Sharpness Adjust the Display sharpness scale

Color Temperature Standard#Warm#Cool

2. Sound

Sound Mode Adjust the TV Sound mode!Standard$"

Volume Adjust Volume Range

Balance Adjust Volume Balance

Bass Adjust the Bass

Treble Adjust the Treble

3. Setting

Aspect Ratio Adjust Display Ratio(16:9/4:3)

Sleep Timer Adjust Display Sleep timer(Close/15Min/30Min/60Min/$/150Min)

OSD Language To select the language (English, Spain, Portuguese Chinese, $)

OSD Transparency Adjust OSD Transparent

OSD Duration OSD timer set!5S~60S"

Recall Restore factory settings

4. Channel

Color System AUTO#NTSC#SECAM#PAL#PAL-I#PAL-BG#PAL-MN#PAL-L

7/27/2019 Y1 TV USER MENU 2011-05-30

11/15

- 10 -

Sound System AUTO#DK#I

Fine Tune Manual fine tuning

Auto Search Auto search TV Channel

Manual Search Manual search TV Channel

Channel Edit Edit Channel in accordance with personal preferences5. GeometryVGA Mode"

Auto Adjustment Automatically adjust for an optimal Image(only for VGA mode)

Clock Adjust the frequency of pixel

Phase Adjust the Phase

H. Position Move the screen towards left or right

V. Position Move the screen upward or downward

On Screen Display (Y1 Series)Push #MENU!button enter #OSD!function selection

1. Picture 2. Audio

3. OSD 4. Function

7/27/2019 Y1 TV USER MENU 2011-05-30

12/15

- 11 -

5. Channel!TV" 6. Source

Function description#

Function Function Description

1. Picture

Contrast Adjust the contrast scale

Brightness Adjust the brightness scale

Hue Adjust the display hue

Saturation Adjust the display color saturation

Sharpness Adjust the Display sharpness scale

Color Temp Normal#Warm#Cool

Scale Adjust Display Ratio(FULL/4:3)

Picture Mode User#Standard#Movie#Vivid

2. Audio

Bass Adjust the Bass

Treble Adjust the Treble

Balance Adjust Volume Balance

Sound Mode Movie#Music#User#Standard

AVC Intelligent Volume

3. OSD

Language To select the language (English, Spain, Portuguese Chinese, $)

H-Position Adjust OSD horizontal on screen

V-Position Adjust OSD vertical on screen

Duration OSD timer set!5S~60S"

Halftone Adjust OSD Transparent!0~100"

Memory Reset Restore factory settings

4.Function

Sleep Timer Adjust Display Sleep timer(Off/15Min/30Min/45Min/60Min)

7/27/2019 Y1 TV USER MENU 2011-05-30

13/15

7/27/2019 Y1 TV USER MENU 2011-05-30

14/15

- 13 -

VGA Mode Audio Selection HD Mode Audio Selection

Normally#after the VGA cable connect rightly , You can press #AUTO! to get the

optimal image performance. No necessary to manually adjust (Only for VGA mode).

Cleaning Notice

1. Gently wipe the screen with a clean, soft lens brush or a soft clean lint-free cloth. This

removes dust and other particles that can scratch the screen.

2. Do not apply pressure to the screen surface when wiping it clean.

3. Do not pour or spray any liquid directly onto the screen or case of the LCD monitor.

Chemical cleaners may damage the screen or the LCD Monitor.

Troubleshooting

%

LCD Pixel StatementThe LCD unit is a product with high-precision manufacturing techniques.

Nevertheless, some pixels may occasionally misfire or appear as black or colored dots.

This has no effect on the recorded image and does not constitute a malfunction.

According to the inspection, Specifications of under 5 is acceptable.

l There is no picture on the screen.

A: Please check the color indicator of the LED on the LCD Monitor.

1." Blue ": During normal operation the LED light will be Blue . If it is Blueand there is no picture contacting the customer service line.

2."Red":Please check the connection of the VGA cable with the monitor

and the computer.

3."NO Power":Make sure the power cord is securely connected to the adapter

and the light on the adapter is green.

l Missing Color

If any of the red , green , or blue colors are missing, check the signal cable to make sure it

is tightened correctly. The pins in the cable can be loose and it will cause a bad connection.

7/27/2019 Y1 TV USER MENU 2011-05-30

15/15

- 14 -

l No image

1. Make sure power button is ON.

2. Check whether the LCD monitor and computer power cords are connected and whether

there is a supply of power.

l No Signal Input

1. Check the signal connection between the computer and LCD Monitor.

l Image too bright / Image too dark

1. Adjust brightness and contrast by OSD.

l Irregular image

1. Check the audio signal cable connection between the computer and LCD Monitor

2. Perform #AUTO!adjustment (Only for VGA mode).

l Distorted image

1. Reset the LCD monitor. (perform the #Reset!function by OSD )

l Image is not centered / Size is not appropriate.

1. Use OSD Image Menu to adjust H. Position and V. Position.

2. Check image size setting.

3. Perform Auto adjustment.

l Uneven color / Color too dark / Dark area distorted / White color is not white

Use OSD Color Temperature Menu to adjust color setting.

l No sound

1. Check the signal connection between the computer and LCD Monitor.

2. Maybe mis-press the#+!or #-!button ; try to press #+!or #-!button to enable the volume

function.