how to program your fios remote with your tv menu

Verizon QuickGuidesTM page 1 of 8

Links to verizon.com External Links

QG07_H

ow_to_

Prog

ram_You

r_FiOS_Re

mote_With

_You

r_TV

_Men

u.pd

f

For more information, visit verizon.com/supportor @ VerizonSupport on Twitter

Programming your FiOS Remote will help you get the most out of FiOS entertainment. To set up your FiOS Remote to work with just your TV, follow the steps below. To program a FiOS Remote that can control multiple devices, skip to page 5.

To program your remote to control just your TV, first turn on your TV using the TV’s power button, or the remote supplied with your TV. Turn on your FiOS Set Top Box (STB), and make sure you can see live television.

Step 1

How to Program Your FiOS Remote With Your TV Menu

http://www.verizon.com/support

https://twitter.com/@verizonsupport



QG07_H

ow_to_

Prog

ram_You

r_FiOS_Re

mote_With

_You

r_TV

_Men

u.pd

f



On your FiOS Remote, press and hold the OK button. Press and hold the FiOS TV button, then release both buttons. The red LED will blink twice, and stay on.

Step 2

Point the FiOS Remote at your TV, then press and hold the Play button.Step 3





QG07_H

ow_to_

Prog

ram_You

r_FiOS_Re

mote_With

_You

r_TV

_Men

u.pd

f



The remote control will try different codes that might match your TV, sending one every second.

When your TV turns off, immediately release the Play button. This will lock in the correct code to control your TV. To test the remote, turn the TV back on with the TV Power button.

Step 4

Step 5





QG07_H

ow_to_

Prog

ram_You

r_FiOS_Re

mote_With

_You

r_TV

_Men

u.pd

f


If you released the Play button too late, use the Channel button to go back to the previous code, or move forward.Step 6

Test your Volume and Mute buttons. If any button doesn’t work as expected, press and hold that button until it works, then release it immediately.


Step 7





QG07_H

ow_to_

Prog

ram_You

r_FiOS_Re

mote_With

_You

r_TV

_Men

u.pd

f


When you’re done, press OK to save these settings. The red LED will blink three times and then turn off.

Want to program a multidevice FiOS Remote? A helpful tool is built right into your TV’s Interactive Media Guide (IMG).


Step 8

Turn on your TV and FiOS Set Top Box (STB).Step 1





QG07_H

ow_to_

Prog

ram_You

r_FiOS_Re

mote_With

_You

r_TV

_Men

u.pd

f


Press the Menu button to show the Interactive Media Guide.


Step 2

Press the Up arrow to highlight Customer Support. Press the green OK button, or the Right arrow to select.Step 3





QG07_H

ow_to_

Prog

ram_You

r_FiOS_Re

mote_With

_You

r_TV

_Men

u.pd

f



Highlight Top Support Tools, and press the Right arrow. Step 4

Highlight Program FiOS Remote, and press OK to launch the programming steps.Step 5





QG07_H

ow_to_

Prog

ram_You

r_FiOS_Re

mote_With

_You

r_TV

_Men

u.pd

f



Follow the onscreen programming steps for your remote model. The model number is usually printed on the remote’s

Step 6battery compartment cover, or inside the battery compartment itself. Once you’ve finished, you’re ready to enjoy FiOS entertainment.

If you need to start over, press the Exit button to end programming mode. Wait for all button lights to blink and turn off, and then try the instructions again.

And if you still need help, visit verizon.com/fiostvhelp for additional instructions and support.


http://www.verizon.com/fiostvhelp


how to program your fios remote with your tv menu

Documents