Summary

Hi there!

Do you love the aesthetics of the classy Winchester Model 1887?Me too! Being featured in Terminator 2, CoD, FarCry, Battlefield and otherwidespread media, you can finally experience it live in your livingroom at minimal cost!

Works great as a Cosplay accessory too! The working mechanism isdefinately an eye catcher! But fear not, IT CANNOT SHOOT! May not bewise to carry it in public though, it looks quite realistic.

This project took a lot of time and effort. I did not have the real gunto disassemble or any 3D-models of some kind. I had to study the originalUS-patent files (available on Google Docs, fun fact) full of cross sections tofigure out how the mechanism works. Next up I had to turn my acquiredunderstanding into CAD models of the internals. While 3d-printing does nothave a lot of limitations, I love models which are easy to print with largeflat bottom surfaces, no need for supports, proper connection solutionswithout the need for glue, simply overall easy to print. Following my ownRules that come with the DeSteiner brand does not make the designprocess easier, but results in a much more satisfying printing process. Allthe dimensions of the gun in general were taken from a sideways image

DeSteiner

DeSteiner Model1887 -mechanicallyworkingWinchester propgun

VIEW IN BROWSER

updated 26. 4. 2020 | published 25. 4. 2020

3D M

ODEL

ONLY

and the info, that the gun is 70cm long. Combining both by counting andconverting pixels I acquired the basic outside dimensions. Surprisingly, thefirst prototype worked quite well. Some troubleshooting, tweaking andpolishing followed.

And here it is. The DeSteiner Model 1887, working like a charm. I hope youenjoy it as much as I do!

And you get all of it for free! If you value my work, I would highlyappreciate it if you sent me a tip! Don't forget to share your makes,too!

Yours, Tobias ~DeSteiner

Check out the Youtube Video to the Project! https://youtu.be/Cz3nReCI69Q

Here is the link to the Assembly Instructions PDF: https://drive.google.com/open?id=1FFadi2S6c6sE12_5g2l_B-1f0ZKTOZnb

And the link to the Explosion Diagram: https://drive.google.com/open?id=1G_zzem77-XJz09ffHYbfLU90AGMc1kLN

Costumes & Accessories > Props

noglue farcry callofduty steiner3d desteiner terminator

shotgun prop nosupports mechanism mechanical gun

easyprint cosplayprop assembly

print slowly! I have designed the tolerances when two parts are meetingto be rather tight to minimize wobble. I used speeds around 25mm/s. Whatyou save in print time, you may have to invest in additional afterwork ifthe parts dont fit together...

I printed all parts at 0,15mm layer height.

Some parts have the addition "brimmed" in their part name. That mostlymeans that I added a 1 layer high surface directly into the model either toimprove brim generation (no brim in useless spots), put additional firstlayer strength to critical part areas, remove the standard brim entirely, orcustom supports. There is always a non-brimmed version too, if you feellike you dont need it.

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

58.1 KBupdated 23. 4. 2020

173.9 KBupdated 23. 4. 2020

140.2 KBupdated 23. 4. 2020

238.5 KBupdated 23. 4. 2020

625.0 KBupdated 23. 4. 2020

215.1 KBupdated 23. 4. 2020

158.6 KBupdated 23. 4. 2020

267.7 KBupdated 23. 4. 2020

636.6 KBupdated 23. 4. 2020

238.1 KBupdated 23. 4. 2020

extractor-right-fixture.stl

barrel-grip_back_brimmed.stl

hammer.stl

lever-right.stl

barrel-tube_pt1.stl

barrel-grip_front.stl

lifter_left.stl

barrel-grip_front_brimmed.stl

barrel-tube_pt1-brimmed.stl

lever-left.stl

296.0 KBupdated 23. 4. 2020

1.6 MBupdated 23. 4. 2020

186.5 KBupdated 23. 4. 2020

500.2 KBupdated 23. 4. 2020

25.2 KBupdated 23. 4. 2020

80.9 KBupdated 23. 4. 2020

409.5 KBupdated 23. 4. 2020

1.9 MBupdated 23. 4. 2020

627.6 KBupdated 23. 4. 2020

25.3 KBupdated 23. 4. 2020

lever-middle.stl

grip.stl

lifter_right.stl

lifter_middle.stl

lifter_lock-spring.stl

extractor-left.stl

barrel-tube_pt3.stl

lever-axle.stl

lifter-nut.stl

trigger-pin.stl

153.8 KBupdated 23. 4. 2020

123.6 KBupdated 23. 4. 2020

1.6 MBupdated 23. 4. 2020

80.9 KBupdated 23. 4. 2020

530.6 KBupdated 23. 4. 2020

58.1 KBupdated 23. 4. 2020

523.7 KBupdated 23. 4. 2020

441.2 KBupdated 23. 4. 2020

526.7 KBupdated 23. 4. 2020

10.0 KBupdated 23. 4. 2020

trigger.stl

tube-plug.stl

grip-brimmed.stl

extractor-right.stl

barrel-tube_pt2.stl

extractor-left-fixture.stl

tube-springhalf-a-brimmed.stl

tube-springhalf-b.stl

tube-springhalf-a.stl

barrel-bolt.stl

443.4 KBupdated 23. 4. 2020

119.4 KBupdated 23. 4. 2020

232.2 KBupdated 23. 4. 2020

1.5 MBupdated 23. 4. 2020

2.9 MBupdated 23. 4. 2020

4.9 MBupdated 23. 4. 2020

17.5 KBupdated 26. 4. 2020

13.5 MBupdated 26. 4. 2020

44.2 KBupdated 26. 4. 2020

tube-springhalf-b-brimmed.stl

barrel-grip_back.stl

12g_ammo_massive.stl

body.stl

tube-pusher.stl

lever-guard.stl

tube-bolt.stl

barrel-tube-clamp.stl

clamp-bolt.stl

The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution—Noncommercial—No Derivates

✖ | Sharing without ATTRIBUTION ✖ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition