Summary

Think2Thing COVID-19 face shield design is based on the original PRUSARC2 headband.

https://www.prusaprinters.org/prints/25857-prusa-protective-face-shield-rc2

The design breaks up the PRUSA RC2 into sub components to allow fornesting of sub components to maximize the build volume for SLSmachines (eg. EOS P395)

The sub components are assembled after printing to form the final product

Orignal Solidworks files, Magics, SLI, and assembly instructions can befound here:

https://www.dropbox.com/sh/g9fik5xau94kshb/AABDMkcXDLKx5x_n1VQdVc_0a?dl=0

Healthcare > Accessibility

faceshield covid19protection

One full set contains:

T Think2Thing

Nestable faceshield based onPrusa RC2

VIEW IN BROWSER

updated 3. 4. 2020 | published 3. 4. 2020

3D M

ODEL

ONLY

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

282.3 KBupdated 1. 4. 2020

282.0 KBupdated 1. 4. 2020

279.8 KBupdated 1. 4. 2020

1.1 MBupdated 1. 4. 2020

1 pc t2tcovidfaceshield-001_R[radius] 1 pct2tcovidfaceshield-002_R[radius] 1 pc t2tcovidfaceshield-003 1 pct2tcovidfaceshield-004 1 pc t2tcovidfaceshield-004_mirror 1 pcbottom_reinforcement

The [radius] for t2tcovidfaceshield-001 and t2tcovidfaceshield-002 isdetermined by your maximum print dimension. Use the radius-to-widthlook up table to find the STL that suits your printer.

This remix is based on

Prusa Face Shield

by Prusa Research

t2tcovidfaceshield-002_r160.stl

t2tcovidfaceshield-002_r190.stl

t2tcovidfaceshield-002_r180.stl

t2tcovidfaceshield-001_r110.stl

1.1 MBupdated 1. 4. 2020

1.1 MBupdated 1. 4. 2020

476.3 KBupdated 1. 4. 2020

383.1 KBupdated 1. 4. 2020

1.1 MBupdated 1. 4. 2020

1.1 MBupdated 1. 4. 2020

287.5 KBupdated 1. 4. 2020

1.1 MBupdated 1. 4. 2020

291.9 KBupdated 1. 4. 2020

t2tcovidfaceshield-001_r120.stl

t2tcovidfaceshield-001_r180.stl

t2tcovidfaceshield-001_flat.stl

bottom_reinforcement.stl

t2tcovidfaceshield-001_r140.stl

t2tcovidfaceshield-001_r160.stl

t2tcovidfaceshield-002_r140.stl

t2tcovidfaceshield-001_r190.stl

t2tcovidfaceshield-002_r120.stl

294.3 KBupdated 1. 4. 2020

6.5 MBupdated 1. 4. 2020

6.5 MBupdated 1. 4. 2020

11.7 MBupdated 1. 4. 2020

7.4 MBupdated 2. 4. 2020

7.4 MBupdated 2. 4. 2020

The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.

License

This work is licensed under a Creative Commons (4.0 International License)

t2tcovidfaceshield-002_r110.stl

t2tcovidfaceshield-004.stl

t2tcovidfaceshield-004_mirror.stl

t2tcovidfaceshield-003.stl

t2tcovidfaceshield-004b.stl

t2tcovidfaceshield-004b_mirror.stl

Attribution-NonCommercial

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition