Our policy is one of continuous development. Accordingly the design of our products may change at any time. Whilst every effort is made to produce up to date literature, this document should only be regarded as a guide and is

intended for information purposes only.Its contents do not constitute an offer for sale or advice on the application of any product referred to in it. We cannot

be held responsible for any reliance on any decisions taken on its contents without specific advice.

05/06/2023

Order form MiCOM P143Ready-to-use configuration

Feeder Management P143 **Design SuffixCPU3 LGrey/Grey case, dual characteristic opto inputs, IEC61850, InterMICOM J

Vx Auxiliary Rating24 - 32Vdc 948 - 110Vdc 2110 - 250Vdc (100 - 240Vac) 3

In/Vn RatingIn = 1/5A, Vn = 100 - 120Vac 1In = 1/5A, Vn = 380 - 480Vac (Min 196Vac Max 560Vac) 2

Hardware Options Protocol CompatibilityStandard - None 1, 2, 3 & 4 1IRIG-B Only (Modulated) 1, 2, 3 & 4 2

331, 2 & 4

3 41, 2 & 4

Ethernet (10 Mbps) 5 5Ethernet (100 Mbps) 5, 6 & 7 6Rear Comms 1, 2, 3 & 4 7IRIG-B (Modulated) & Rear Comms 1, 2, 3 & 4 8Ethernet (100Mbit/s) plus IRIG-B (Modulated) 5, 6 & 7 AEthernet (100Mbit/s) plus IRIG-B (De-modulated) 5, 6 & 7 BInterMiCOM + Courier Rear Port 1, 2, 3 & 4 EInterMiCOM + Courier Rear Port + IRIG-B modulated 1, 2, 3 & 4 FRedundant Ethernet Self-Healing Ring, 2 multi-mode fibre ports + Modulated IRIG-B 6, 7 & 8 GRedundant Ethernet Self-Healing Ring, 2 multi-mode fibre ports + Un-modulated IRIG-B 6, 7 & 8 HRedundant Ethernet RSTP, 2 multi-mode fibre ports + Modulated IRIG-B 6, 7 & 8 JRedundant Ethernet RSTP, 2 multi-mode fibre ports + Un-modulated IRIG-B 6, 7 & 8 KRedundant Ethernet Dual-Homing Star, 2 multi-mode fibre ports + Modulated IRIG-B 6, 7 & 8 LRedundant Ethernet Dual-Homing Star, 2 multi-mode fibre ports + Un-modulated IRIG-B 6, 7 & 8 MRedundant Ethernet Parallel Redundancy Protocol (PRP), 2 multimode fibre ports + Modulated IRIG-B 6, 7 & 8 NRedundant Ethernet Parallel Redundancy Protocol (PRP), 2 multimode fibre ports + Un-modulated IRIG-B 6, 7 & 8 P

Product Specific Options60TE Case, 16 logic inputs & 14 relay outputs A60TE Case, 24 logic inputs & 14 relay outputs C60TE Case, 16 logic inputs & 22 relay outputs D60TE case, 24 logic inputs & 22 relay outputs E60TE case, 32 logic inputs & 14 relay outputs F60TE Case, 16 logic inputs & 30 relay outputs G60TE Case, 16 logic inputs & 18 relay outputs (including 4 High Break) H60TE Case, 24 logic inputs & 18 relay outputs (including 4 High Break) J60TE Case, 16 logic inputs & 26 relay outputs (including 4 High Break) K60TE Case, 16 logic inputs & 22 relay outputs (including 8 High Break) L80TE Case, 32 logic inputs & 32 relay outputs M

Protocol / Communications Options Hardware CompatibilityK-Bus 1,2,3,4,7,8,C,E or F 1Modbus 1,2,3,4,7,8,C,E or F 2IEC 60870-5-103 (VDEW) 1,2,3,4,7,8,C,E or F 3DNP3.0 1,2,3,4,7,8,C,E or F 4UCA2 5 & 6 5IEC 61850 over Ethernet and Courier via rear K-Bus/RS485 6, A, B, G, H , J, K, L, M, N, P 6IEC61850 over ethernet with CS103 rear port RS485 protocol 6, A, B, G, H , J, K, L, M, N, P 7DNP3 over Ethernet with Courier rear port K-Bus/RS485 protocol 6, A, B, G, H , J, K, L, M, N, P 8IEC61850 over Ethernet with DNP3.0 rear port RS485 protocol 6, A, B, G, H , J, K, L, M, N, P 9

* NB: UCA2 option is not available with software versions 32 and later

Mounting OptionFlush Panel Mounting MRack Mounting, (80TE only) N

Multilingual Language OptionEnglish, French, German, Spanish 0English, French, German, Russian 5Chinese, English or French via HMI, with English or French only via Communications port C

Software Issue **

Settings/CustomisationDefault 8Customised 9

Fibre Optic Port (ST) for SCADA Protocols (Courier,Modbus,IEC60870-5-103 or DNP3)

Fibre Optic Port (ST) for SCADA Protocols (Courier,Modbus,IEC60870-5-103 or DNP3) + IRIG-B modulated

05/06/2023

Order form configurator MiCOM P143Ready-to-use configuration

1-4 5 6 7 8 9 10 11 12-13 14 15

Feeder Management with autoreclose and check synchronising P143 9 1 6 A 6 M 0 A0 8 L

SAP PART NUMBER E143916A6M0A08LDesign Suffix: Options based on preferred solutions selection here

LSoftware: Options Design Suffix dependent

A0

Vx Aux Rating

9

In/Vn Rating1

Hardware Options

6

Product Specific Options

A

Protocol/Communications Options

6

Mounting OptionM

Language

0

Settings/Customisation8

Master Text

Page 4 of 11 document.xls 05/06/2023

P143916A6M0A08L

Feeder Management with autoreclose and check synchronising

Vx Nominal auxiliary voltage options : 24 - 32VdcIn/Vn Rating options : In = 1/5A, Vn = 100-120VacHardware options : Ethernet (100Mbit/s)Product specific options : 60TE Case, 16 logic inputs & 14 relay outputsProtocol options : IEC 61850 over Ethernet and Courier via rear K-Bus/RS485Mounting options : Flush Panel MountingLanguage options : Multilingual - English, French, German, SpanishSoftware options : A0Settings/Customisation : Default

ATEX II (2) G

27/11/1411/07/1404/02/1425/06/13

17/01/1320/11/1206/10/1201/10/1211/09/1220/08/1209/08/1209/07/1202/06/1208/05/1210/03/1213/02/1206/02/1221/11/1113/09/1110/08/1120/02/11

29/09/1018/08/1010/06/10

02/03/1010/02/1002/12/0908/05/09

01/12/0827/08/0812/08/0801/07/08

18/03/0813/03/0806/03/0812/04/0710/02/07

08/01/0712/09/0605/08/0601/06/06

21/03/0626/10/0510/10/0522/07/0524/03/0522/03/05

20/12/0406/12/0423/11/0412/10/0423/06/04

04/05/0403/05/0411/03/0418/02/0419/01/0417/11/0313/09/0319/05/0308/05/0324/03/0318/02/0307/11/0215/08/0201/06/0230/11/0130/11/0130/11/01

As per NALW-9Q3DKQ - P140VA0A Major Software ReleaseAs per SBIA-9KBCL4 new power supply option released (9) with (1) removed from optionAs per DKEG-9FJDJW power supply voltage amended from 24-48Vdc to 24-32VdcSBIA-98UAW2 releases PRP options

As per SBIA-8YQCWT + SBIA-8ZUAH6 PCBA 2071960A22 replaces ZN0017012As per JGAR-8X7AQ8 2072036A01 HMI replaces GN0180001"Stand alone non modulated IRIG-B" (digit 7 = C) removed from offer as per Obsolescence programGN9025 removed from BOM (no longer used)As per JGAR-8X7AQ8 2072034A01 HMI replaces GN0179001Vx auxiliary rating amended to 48 - 110 Vdc (from 48-110Vdc (40-100Vac)) per CBUN-8WXJKEDesign suffix C & G options removed from offer as per Obsolescence Program2071962A01 replaces ZN0019001 and 2071966A01 replaces ZN0031001 as per SBIA-8URHXUObsolescence warning added to suffix C & G optionsPSUs amended to 2071964xxx as per SBIA-8S6A9STendering sheet addedObsolescence warning added to "Stand alone non modulated IRIG-B" (digit 7 = C) as per latest obsoletion noticeSW Version 21 released to SMC production, per approved TOMAS request 213SW Version 46 released to production, incorporates rebrand and several other enhancementsUpdate as per latest AG obsoletion notice Reworked for Schneider Electric requirements

Lookup correction for Suffix 'G' & UCA2 Protocol CID ISTE-85VFU7 removed '10' & '16' software versions

44' Software released by CID ISTE-82HLT5 Redundant Ethernet optons made available, see CIDs ISTE-7YAMBJ & SKEL-7YBM34Model 'M'; Redundant Ethernet Options included but set as 'not available'; '43' software released; see CID ISTE-7RMDSS

BOM retrospectively corrected to include GN0179001AREVA for G suffix, Russian language optionsExplanatory text retrospectively added to '35' software per G Evans 41…J software released by CID GEVA-7FZEF2, BOM rules corrected for UI & suffix 'G'

Software versions prior to '05' removed from Cortec to maintain concordance with Software History and Compatibility databaseHardware "A", Product Specific options were "Nothing"; now shown as "16 logic inputs & 14 relay outputs""40…J" software released by CID GEVA-7CEFKM "36…J" software released by CID GEVA-726JEM Chinese language version was not included in Software Version '35' options

Cortec & Date Drivers retrospectively amended to show revised text for IEC 61850 Comms Protocol (was "IEC 61850" only) BOMs corrected to include ZB9800801/2 in all variants where digit # 9 = "6" All worksheets amended to add High Break, De-Modulated IRIG-B with software "35" effective 01/08/06BOM amended. Cortec & Date Drivers text changed for what was just "Chinese HMI"

"32…J" Software released with DC date of 26/10/05 NB: eternet options are not available with this issue -CDN R5760ZN0021*** changed retrospectively to ZN0001*** for 'B' design suffix versionsFor design suffix 'A' ZN0005002 was missing from BOM, ZN0002001 quantity was 1 Cortec Product Specific Options corrected in line with ConfiguratorHardware options 3 & 4 read "Fibre Optic Converter Only" & "IRIG-B and Fibre Optic Converter"

80TE version only available at SME ; Chinese display only available at SMC but option of ordering both together was available, now removed

References to 'Settings files' amended to read 'Settings/Customisation', 'Areva' and 'Alstom' cases to read 'Blue/Grey' and 'Grey/Grey'

Master Text amended to include function description, database corrrected to re-order software array (A57 - 67) enabling selection of '30' option with @j' hardware

42…J software released by CID ISTE-7LCFEC, also restriction to protocol availability on version '17' software, see CID ISTE-7LKGQL

"34…J" Software and Chinese HMI added in line with G Evans' e-mail dated 15/03/06, with a guestimated DC date of 21/03/06. BOM still requires amendment!!

Configurator amended to allow choice of design suffix and software first to drive the subsequent options"30…J" Software/Hardware released with DC date of 07/01/05Rules Clarified on jumper links ZB9031759Livery Option addedDates amended on Lookup to pick up correct final assembly according to design suffix

Software "21…G" with estimated release date of 07/05/04Rules modified for Ethernet Licences ZB9800801 & ZB9800802Software "20…G" with "…/Russian" language option release date was 16/02/04, now 01/06/04Software "20…G" with "…/Russian" language option release date was 19/01/04, now 16/02/04Software "20…G" with "…/Russian" language option release date was 01/04/04, now 19/01/04Design suffix was "C" for all. Now "C" only for "Rear Comms" variants & "B" for the restPL2 position added to sub item text on BOMZB9800801 & ZB9800802 added to BOM for use when Ethernet is selectedSoftware issue to "16" for one day to allow for special ordersP142 Cortec created from P14x, now includes UCA2 / Ethernet from 01/03/2003Rear comms available from 18/11/02Qty ZB4018110 was 2 less for P14***7******** variantsIncorporate P144Slot 05 pcb for P142***C******B variants was ZN0017001 in errorHardware option 4 specified Protocol option 4 in errorOriginal

"21…G" Software/Hardware released as per CDN R3500/193, this is released as One Day Only as "15…C" is latest unless customer specifically requests "21G"

BOM

Page 9 of 11 document.xls 05/06/2023

NUMBER DESCRIPTION Ref

P143916A6M0A08LZN0049001 PCB ASSY - Px40 100Mhz Ethernet Bd- A/02 Ref 6 1ZB9800801 License for VxWorks Ref 55 1ZB9800802 Sisco License for MMS-Ease Lite Ref 56 1ZB4018215 SELF TAP SCREW SIZE 6x1/4" LG Ref 61 2

1

Qty. Required

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Cortec Landing cell : P14331JG6M0468J P 1 4 3 3 1 J G 6 M 0 4 6 8Configurator feedback : P143916A6M0A08L P 1 4 3 9 1 6 A 6 M 0 A 0 8

0Cortec digit control 1 PCortec digit control 2 1Cortec digit control 3 4Cortec digit control 4 3Vx Aux Rating 1 9In/Vn Rating 1 1Hardware Options 5 6Product Specific Options 1 AProtocol/Communications 1 6Mounting Option 1 MLanguage 1 0Software: Options Design 1 A 0Settings/Customisation 1 8

15 19 19

JL double digit in same row

56789

1011121314151617

L 0 1000000000000