axiom
TRANSCRIPT
The AX-L Shale Shaker
Axiom AX-L NEW 26/8/11 15:58 Page 1
The AX-L concept
Philosophy
The AX-1 shaker has revolutionised the deepwater shaker market by offering a significant increase in processing
capacity in a smaller footprint coupled with the ability to retain bridging materials while reducing drilled solids
concentrations.
Underpinned by this successful approach, the AX-L shaker evolves the concept further by offering an even more
compact shaker system which delivers the four things most desired by both operator and rig owner:
o Ability to handle large circulating rates in respect to fast, top-hole drilling
o Improved separation and reduced screen costs through 'sequential' screening
o Sized Material Retention™
o A user-friendly design with low-maintenance components
Dual Modes
The 'smaller rig' market now has the opportunity to employ dual screening modes in a cost-effective and
ultra-compact system. The triple-deck AX-L, with an effective screening area of 3m2, can operate in either parallel OR
series modes:
o In parallel mode, fluid handling capacity is increased by 'load sharing' the flow between the middle and lower decks;
o In series mode the fluid is consecutively screened through the three decks – thereby optimising solids removal
efficiency and the life of the ultra-fine screens employed.
Sized Material Retention™
Drilling fluids are more frequently being engineered to contain specifically sized particles. This can be either
conventional lost circulation materials to combat significant downhole losses, or specifically sized material to bridge
fractures and pore spaces. This allows higher fluid densities – often above the fracture gradient – to be employed.
This results in:
o Reduced whole fluid losses in depleted zones
o Reduced number of casing runs
o Increased margin of safety
The AX-L increases the efficiency and cost-effectiveness of these fluid formulations by retaining the sized particles on
the middle deck while removing the larger and finer drilled solids on the upper and lower decks.
Summary of Benefits
Capacity: In parallel mode the AX-L delivers comparable screening area to conventional dual-deck
shakers within a significantly smaller footprint.
Improved Separation: When configured for series mode, the AX-L transforms into the ultimate fine screening
machine by allowing sequential screening AND reduced screen costs.
Flexibility: With options for parallel, series and Sized Material Retention™ the AX-L can now offer the
levels of flexibility only before seen on large, offshore rigs.
Footprint: Because the AX-L is effectively 60% the footprint of a standard dual-deck shaker, the space
and weight required for installation is greatly reduced.
Reliability: The AX-L combines proven components from the AX-1 shaker basket structure with a
field-proven, ruggedised drive system components to increase up-time and reduce
maintenance costs.
Screens: The AX-L uses the massively successful AX Screening System (as employed on the AX-1
shaker).
Returns
Processed fluid
Drilled solidsReturns
Processed fluid
Drilled solids
Parallel operation Series operation
Axiom AX-L NEW 26/8/11 15:58 Page 2
Specifications of the AX-L:
General
Equipment Type Shale Shaker
Vibratory Motion Balanced Elliptical
Angle of Motion Fixed
Speed of Vibration Fixed (Variable as Option)
Drive System
Method Electrically Driven Vibrator Motor
Air System
Air Supply Requirements Pressure 80 – 90psi
Capacity 0.3 ft2/min
Dry Operating Weights (kg) & Dimensions (mm)
Weight Length Width Height
Retrofit 1500
Single 1900 2554 1155 1677
Dual 3900 2554 2640 1677
Triple 5900 2554 4125 1677
Quadruple 7900 2554 5610 1677
Screening Arrangement
Screen Configuration Triple Deck
Top Deck Pretensioned
Screen Types Intermediate Deck Pretensioned
Bottom Deck Pretensioned
Top Deck Pneumatic
Screen Clamping Intermediate Deck Pneumatic
Bottom Deck Pneumatic
Top Deck 2°
Screen Angles Intermediate Deck 7°
Bottom Deck 7°
Angle Adjustment None Fixed
Screen Areas Per Deck 1.01m2/10.82ft2
Total 3.03m2/32.46ft2
Screens - Boxed for Shipping
Top 3 off required 4.5kg each
Intermediate 3 off required 4.5kg each
Bottom 3 off required 4.5kg each
Head Office:
Unit 13, Ashley Group Base, Pitmedden Road, DyceAberdeen AB21 0DP
Tel: +44 1224 794200Fax: +44 1224 725658Email: [email protected]: www.axiomprocess.com
United States:
Axiom Process LLCBob Palmer
Tel: +(1) 832-314-3354Email: [email protected]: www.axiomprocess.com
Worldwide Sales Agent:
Axiom Process FZETim Bailey
Tel: +971 (0)508107045Email: [email protected]: www.axiomprocess.com
Shaker comparison
Conventional Single/Dual Deck shaker: 2997mm (l) x 1685mm (w) 2177kg
Axiom AX-L: 2554mm (l) x 1155mm (w) 1900kg
Axiom AX-L NEW 26/8/11 15:58 Page 4