workplace organisation - aih
TRANSCRIPT
WORKPLACE ORGANISATIONProduct range
2010_GB_en_FB_WorkplaceOrg.indd 1 25.01.11 09:36
The workplace: no room for compromise.
Workplace organisation is at least as important as an accurate power tool. Because ultimately almost inexhaustible potential lies behind this. The optimisation of work processes, shorter tooling and channel times, as well as significantly more precise work results.
The decisive questions are: What characterises a well-organised workplace – irrespective if it is in the workshop or at the as-sembly stage? How can you replace search with find? How can costly retrofitting be reduced considerably by accessories that are coordinated to the machine and application? And how can ergonomic detail, for tools and lots more, be transferred to the entire work process?
The answers to all these questions cannot be found on the draw-ing board, but through direct dialogue with on-site tradesmen. Tasks associated with the approach are not to be viewed in isola-tion, but considered as a component of an integral system. With the aim of making each job quicker, simpler and more efficient.
Contents X Systems get it done X SYSTAINER T-LOC | SORTAINER X Systainer-Port SYS PORT | Roll board X Multifunction table MFT 3 X Guide rail FS | GECKO DOSH dual suction pad X Vacuum clamping system VAC SYS X EAA energy box | ASA boom arm X Workcenter WCR 1000 | Toolcenter TC 3000/2 X Accessories and consumables |
Scope of delivery and order numbers
0406081012141618 20
2
2010_GB_en_FB_WorkplaceOrg.indd 2 25.01.11 09:36
SYSTAINER T-LOCThe SYSTAINER T-LOC can be opened, locked or connected together with a single turn. With the
SYSTAINER arrangement system, Festool has been setting standards in matters of functionality since
1993. The T-LOC is a further milestone. And like eve-rything else from Festool it fits perfect as a system.
Guide railIn 1964 Festool made a breakthrough with the guide rail with respect to precision and simplifying work.
With lots of useful detail it is impressive in all areas: slideway lining, splinterguard for splinter-free cuts,
groove for fastening and lever clamps, as well as groove accessories for attaching combination bevels,
kickback stops and GECKO DOSH dual suction pads.
Quality tools “Made in Germany”Many of our tools have already been in use for over
30 years. This is no coincidence but a logical conse-quence of the careful development and production
“Made in Germany”. Our products live up to the prom-ise: tools for the toughest demands.
Special serviceWith each warranty registration Festool custom-
ers automatically receive an added benefit: the Festool Service. Starting with a particularly quick repair service, a reliable 7-year spare parts sup-ply, as well as an extended 3-year warranty on all
new tools and machines. Find out more about the Festool Service and its associated benefits at
www.festool.co.uk
www.festool.co.uk 3
2010_GB_en_FB_WorkplaceOrg.indd 3 25.01.11 09:36
Because things work better when everything fits together.
Systems get it done.
Whoever wants to be good needs the perfect tool. Whoever wants to be better needs a system. A system in which acces-sories and consumables go hand-in-hand with the tools. A system that stands for more order and organisation. And a system that represents added value with each investment.
A system that only has one goal: to achieve more success even more quickly and easily.
System = added value
Each investment in a Festool product represents added value. For example the guide rail: Used in its basic function it provides precise support dur-ing sawing and routing. Used with the combination bevel specific angles can be assigned directly to the workpiece. The guide rail in conjunction with the multifunction table results in a fully-fledged work station.
4
2010_GB_en_FB_WorkplaceOrg.indd 4 25.01.11 09:36
System = continuous work process
Full concentration on the work. The required tool is immediately on hand and ready for use. The dust extraction is effected with the utmost precision from the insertion of the tool right to the end when it is once again in an idle state. This is all controlled centrally via the EAA energy box in connection with the ASA boom arm. For a larger action radius, shorter tooling and path times and more time for the perfect result.
System = better organised
Whoever is better organised, attains their goals quicker. For this reason, Festool provides a universal system. With Systainers and Sortainers for more order and arrangement, the Systainer-Port and Workcenter WCR for better mobility or the Toolcenter TC 3000/2 as a compact, rolling workplace. Geared towards one goal, compatible and consistent: to make each work process that bit more efficient.
www.festool.co.uk 5
2010_GB_en_FB_WorkplaceOrg.indd 5 25.01.11 09:36
Tidier. Clearer arrangement. Simply better organised. The Festool SYSTAINER and SORTAINER. And to make things even easier in the future there is the new Sys-tainer T-LOC: Open. Lock. Connect. With a single turn.
X Robust protection – machines, accessories and consumables are safe from dust, splashing water, extreme temperature differences and impacts
X Mobile arrangement – with the SYSTAINER/ SORTAINER everything is stored neatly and easy to transport
X Clearly labelled – label fields for inserting busi-ness cards or labels that can be ordered via the Festool homepage www.festool.co.uk/service
X Can up carried upright – for sizes 1 and 2 of the SYS T-LOC there is an additional retractable handle (accessory)
X Compatible with previous Systainer generation
SYSTAINER SYS T-LOC | SORTAINER
Excellent order.
Technical data SYS T-LOC SYS 1 T-LOC SYS 1 T-LOC DF* SYS 2 T-LOC SYS 2 T-LOC DF*
Weight (kg) 1.3 1.3 1.5 1.5
External dimensions L x B x H (mm) 396 x 296 x 105 396 x 296 x 105 396 x 296 x 157.5 396 x 296 x 157.5
Technical data SYS T-LOC SYS 3 T-LOC SYS 3 T-LOC DF* SYS 4 T-LOC SYS 5 T-LOC
Weight (kg) 1.8 1.8 2.1 2.7
External dimensions L x B x H (mm) 396 x 296 x 210 396 x 296 x 210 396 x 296 x 315 396 x 296 x 420
Technical data MAXI/MINI SYSTAINER SYS MAXI SYS MAXI 2 SYS MINI
Weight (kg) 4.0 3.0 0.4
External dimensions L x B x H (mm) 590 x 390 x 210 590 x 390 x 157.5 265 x 170 x 70
Technical data SORTAINER SYS 3-SORT/4 SYS 3-SORT/6 SYS 3-SORT/9 SYS 3-SORT/12
Drawers 2 small, 1 medium, 1 large 6 medium 6 small, 3 medium 12 small
Weight (kg) 4.0 4.9 5.1 5.3
External dimensions L x B x H (mm) 395 x 295 x 210 395 x 295 x 210 395 x 295 x 210 395 x 295 x 210
* DF = Lid compartment Scope of delivery | Order numbers from page 266
2010_GB_en_FB_WorkplaceOrg.indd 6 25.01.11 09:36
Everything at a glance – the drawers of the SORTAINER offer lots of space for small parts.
1. Clearly arranged with individual dividers and additional labelling options.
2. From left or right. The handle on the two sides of the drawers enables quick access to the contents.
3. Accidental pulling out of drawers is avoided by the pull-out catch and individual safety lock.
4. With the selection of different sizes and the modular drawer system the right SORTAINER is on hand for every demand.
The new SYSTAINER T-LOC can be opened at any time without having to be disconnected.
New – the central operating element of the SYSTAINER T-LOC combines three functions. Lock. Open. Connect. With a single turn.
Secure connection – in a SYSTAINER connection or in combination with a mobile dust extractor, Systainer-Port and Workcenter WCR.
For system accessories and consumables see from page 26
www.festool.co.uk 7
2010_GB_en_FB_WorkplaceOrg.indd 7 25.01.11 09:36
Everything in its place and on hand at all times. The Systainer-Port and the roll board ensure increased mobility at the workplace.
X Individual arrangement – the Systainer-Port has height-adjustable drawers for the precise adjustment to the respective Systainer height
X Can be moved in all directions – thanks to ball-bearing guide wheels
X Stable – the Systainer-Port comprises a robust steel plate, each roll board can transport up to 50 kg
X Well-secured – the Systainer-Port is equipped with an anti-slip rubber insert, interlocking drawers and a security lock, the locking brake prevents undesired rolling, also for the roll board
X Compatible – fits the SYSTAINER T-LOC and previ-ous Systainer generation
Systainer-Port SYS PORT | Roll board
Good for quick transport.
SYSTAINER size SYS-PORT 500/2 SYS-PORT 1000/2
No. of SYSTAINERS No. of SYSTAINERS
Version 1 2 3 4 5 6 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
SYS 1 T-LOC/DF* 3 2 1 8 6 6 5 5 4 4 3 3 3 3 2 2 2 2 2 1 1 1 2 4 1 1
SYS 2 T-LOC/DF* 1 2 1 1 2 1 1 2 3 1 2 4 2 3 1 1 2 3 4 5 2
SYS 3 T-LOC/DF* SORTAINER 1 1 1 1 2 1 1 2 3 2 1 2 3 1 1 4 1 1 2
SYS 4 T-LOC/DF* 1 1 1 1 1 2 1 2 1 1 2 1
SYS 5 T-LOC/DF* 1 1 2 1 1 1
Drawers required** 3 3 2 2 2 1 8 7 7 7 6 6 6 5 6 6 5 5 5 6 5 4 5 5 4 3 4 4 4 5 5 4 3 4 5 2 3 3 4
* DF = Lid compartment * The SYS-PORT 500/2 is supplied with 3 drawers, the SYS-PORT 1000/2 with 5 drawers. Scope of delivery | Order numbers from page 26
How many SYSTAINERS fit in a SYS-PORT?
8
2010_GB_en_FB_WorkplaceOrg.indd 8 25.01.11 09:36
Simple access – pull out completely to remove each SYSTAINER from the Systainer-Port or to open.
Problem-free, even in narrow corridors – the dimensions of the roll board are barely larger than the SYSTAINER/SORTAINER.
Label fields for quick information on the contents.
For system accessories and consumables see from page 26
www.festool.co.uk 9
2010_GB_en_FB_WorkplaceOrg.indd 9 25.01.11 09:36
Technical data MFT 3
Working height (folded away) 900 mm (180 mm)
External dimensions 1157 x 773 mm
Work surface 1102 x 718 mm
Max. workpiece height 78 mm
Max. workpiece width 700 mm
Hole diameter 20 mm
Hole pattern 96 mm
Load capacity 120 kg
Weight 28 kg
Scope of delivery | Order numbers from page 20
Creates professional work conditions also at the assembly stage. Its flexible clamping and processing options for large and small workpieces make the multifunction table MFT 3 probably the most diverse worktop in the world.
X Maximum precision – with all-round aluminium profile for holding the height-adjustable guide rail and the angle stop
X Maximum support – flexible and secure clamping through 96 hole pattern with fixed clamps and fastening clamps developed especially for this
Multifunction table MFT 3
1 table. 1000 options.
X Easy on the back – the work height of 90 cm is also pleasant for tall users
X Simple to expand – the MFT 3 can be connected with an additional MFT 3 or with the CMS modular system and accessories using the V groove
X Easy to transport – the MFT 3 can be folded up quickly and is thus also ideal for mobile use
10
2010_GB_en_FB_WorkplaceOrg.indd 10 25.01.11 09:36
Whether it‘s large or small, angular or round, horizontal or vertical – difficult shapes are easy to clamp on the MFT 3.
Connection to the system – via an adapter plate the vacuum clamping system VAC SYS can be connected to the MFT 3 and swivelled down-wards when not in use.
Precision in all situations – thanks to secure rail, angle stop, adjustable stop and additional clamp. The guide rail can be adjusted to different mate-rial thickness.
System extra - the MFT 3 extension allows you to use all the CMS modules for sawing, routing and sanding.
For system accessories and consumables see from page 20
2010_GB_en_FB_WorkplaceOrg.indd 11 25.01.11 09:36
Invented and perfected by Festool: the guide rail. For cuts and grooves that impress thanks to their preci-sion. With a slideway lining for the smooth running of the machines, a groove for the fastening and lever clamps or the splinterguard for splinter-free sawing.
X Clearance-free guide – the guidance jaws of the plunge-cut saws can be adjusted to the guide rail without using any tools
X Splinter-free cut – the rubber lip directly at the scribe mark prevents the edges from stripping, also for angled cuts
X Accurate work – for exact grooves there is the guide rail adapter for routers
X Simple angle transfer – with combination bevel and guide rail
X Easy to create a series of holes – for furniture assembly the guide rail with the hole pattern is indispensable
FS guide rail
Impeccable guide.
Indispensable in furniture construction – router and guide rails with rows of holes simplify work on shelves or fittings.
Simply precise – the workpiece width can be comfortably adjusted with the parallel stop with a scale and adjustable stop.
Quick for diagonal cuts – with guide rail and combination bevel angles are easy to transfer from the workpiece or wall.
12
2010_GB_en_FB_WorkplaceOrg.indd 12 25.01.11 09:36
Work with a vacuum without leaving any marks. The GECKO dual suction pad – for simple and safe trans-port also for awkward workpieces or for securing the guide rail on smooth surfaces.
X Ergonomic – the torsionally rigid carrier handle makes lifting loads a lot easier
X Holds the position, protects the materials – the slide rings attached on both suction pads allow easy and precise positioning, and also releasing, of the GECKO pad
X Secure support – the green clamping lever ensures quick and safe extraction
X With a system in mind – with the guide rail adapter the GECKO dual suction pad can be fitted directly on the guide rails
GECKO dual suction pad
Secure connection for a period.
The GECKO dual suction pad transports smooth and awkward workpieces safely and comfortably.
Simple and fast assembly – the adapter for securing the guide rail.
Significantly more comfort when laying floors.
www.festool.co.uk 13
2010_GB_en_FB_WorkplaceOrg.indd 13 25.01.11 09:36
Processing workpieces in one work step from all angles – from the flat area to the edge – without con-verting. VAC SYS stands for simple, ergonomic and quick work.
X Strong control – workpieces up to 30 kg and 1 x 1 m are safely secured with each clamping unit
X Protects the material – the pads are made from soft and flexible plastic – also sensitive surfaces can be clamped
X Safe grip – with the foot valve the vacuum pad can be released and, at the same time, the workpiece can be held in the hands
X Stable positioning – regardless of the subsurface the VAC SYS extracts at the work area or is se-cured using fastening clamps
X For en route – pumps and clamping units are housed in a SYSTAINER designed for transport
Vacuum clamping system VAC SYS
Maximum flexibility all-round.
Technical data VAC SYS
Pump capacity* 2.7 m3/h at 50 Hz, 3.5 m3/h at 60 Hz
Voltage 220–240 V
Insulation class F
Noise level 55 dB (A)
Dimensions 395 x 295 x 210 mm (SYSTAINER SYS 3)
Weight VAC SYS VP 8.0 kg
Work and storage conditions (Temp./Air humidity)** 0° C up to +50° C/30 % up to 95 %
Minimum vacuum ≥ 810 mbar/≥ 81 %
Power consumption 160–200 W at 50 Hz, 200–230 W at 60 Hz
Speed 2800 rpm at 50 Hz, 3300 rpm at 60 Hz
Operating time under normal conditions 5000-8000 hours
* Do not operate pump in excess of 2000 m above sea level ** Duration of extreme weather impact 30 days Scope of delivery | Order numbers from page 20Vacuum pads available in sizes D 215 mm (round), 200 x 60 mm (oval), 277 x 32 mm (narrow), 275 x 100 mm (oval)
14
2010_GB_en_FB_WorkplaceOrg.indd 14 25.01.11 09:36
Twice the power – for particularly large, difficult and rolling workpieces a second clamping unit can be connected to the VAC SYS pump.
Pads can be replaced without using tools – there are four pad sizes to select from for differ-ent workpieces and they can be replaced quickly using FastFix.
Workpieces can be processed from all angles – can be rotated up to 360° and tilted up to 90°. Ergonomic work without converting is thus guaranteed.
For system accessories and consumables see from page 20
www.festool.co.uk 15
2010_GB_en_FB_WorkplaceOrg.indd 15 25.01.11 09:36
Extended action radius and central control: thanks to the energy box EAA and the boom arm ASA. They hold tools within easy reach, supply energy and extract automatically. For increased mobility and efficiency when working.
X Can be adjusted manually – the suction power is made available through the slide operation, where a power tool and/or a compressed air tool is operated
X Flexible – the EAA can be mounted on ceilings, walls or the boom arm
X Ready for use straight away – two power tools or compressed air tools can be mounted directly on the housing for the EAA
EAA energy box | ASA boom arm
For more ease of movement.
Technical data EAA-EW* EAA-EW/DW*
Dimensions 506 x 580 x 367 mm 516 x 580 x 367 mm
Pressure range 4–8 bar 4–8 bar
Weight 10.2 kg 13 kg
Technical data ASA 2500 ASA 5000 ASA 6000
Boom extension 2.5 m 2 x 2.5 m 2 x 3.0 m
Cutting angle adjustment 9 m2 39–58 m2 56–84 m2
Length of cables for power connection Approx. 3 m Approx. 3 m Approx. 3 m
Weight 55 kg 77 kg 85 kg
* EW= power tool DW= compressed air tool Scope of delivery | Order numbers from page 24
16
2010_GB_en_FB_WorkplaceOrg.indd 16 25.01.11 09:36
The ASA boom arm ensures an increased ac-tion radius, makes possible a central energy supply and dust extraction and makes the tools ready at the exact position where they will be used.
X Large utilisation area – extended action radius from 9–84 m2, high flexibility is guaranteed through the double-jointed technology for ASA 5000/6000
X Mobile system – suitable for use with Festool mobile dust extractor CT/SRM
X Stable and lightweight – aluminium profiles make the ASA lightweight and extremely torsion-free
X Variable – can be mounted on walls and pillars
Increased security and better arrangement – in the hose holders on the rear of the EAA two hoses can be stored and kept clean.
Free choice – in the “MAN” switch position the dust extraction starts manually when the EAA is switched on. Change to “AUTO” to switch on the tool. And in position “0” the power supply is only activated via the power outlet with permanent voltage.
For system accessories and consumables see from page 24
Wall mounting Pillar mounting
www.festool.co.uk 17
2010_GB_en_FB_WorkplaceOrg.indd 17 25.01.11 09:36
Technical data WCR 1000
Dimensions Overall lengthLength of base plateWidthMin. heightMax. height
1050 mm600 mm362 mm545 mm785 mm
Weight Approx. 10.2 kg
Max. weight for storage 5 kg
Hole pattern Large square hole patternVertical hole inner distanceHorizontal hole inner distance
9.2 x 9.2 mm38.1 mm38.1 mm
Scope of delivery | Order numbers from page 24
Suitable for all extractors CT 22-55, CLEANTEX CT 26/36/48 and the special application extractor CTH 26/48
Compact and mobile work. The Workcenter WCR 1000 can be connected to all Festool mobile dust extrac-tors with an integrated Sys-Doc*. Tools, accessories and consumables are clearly arranged here.
X Flexible equipment – hooks for holding two machines with extractor hoses, universal holder, storage compartment, as well as rotatable area for small parts
X Individually extendible – hole panel and profiled groove can be equipped with additional storage areas, hooks, and holders
X Easy on the back – simple height adjustment of the Workcenter, hooks and storage areas
X Individual extras – SYSTAINER sizes 1 to 4 or SORTAINER can be integrated in the Workcenter (not included in scope of delivery)
X Everything in its place – plastic hooks can be used to hang bottles or cloths, the rotatable storage area is ideal for small parts
Workcenter WCR 1000
Mobility in the tightest of spaces.
Profiled groove for holding tools and universal hooks – height-adjustable groove.
* except CT MINI/CT MIDI
18
2010_GB_en_FB_WorkplaceOrg.indd 18 25.01.11 09:36
Technical data TC 3000/2
Dimensions (length x width x height) 470 x 1070 x 960 mm
Storage area 460 x 990 mm
Storage area working height 925 mm
Weight 43 kg
Scope of delivery | Order numbers from page 24
Attachment option for all mobile dust extractors CT, CTL, CTM 22/26/33/36; SR 200, SR 45 with strap
Presence on 0.4 m²: The Toolcenter TC 3000/2 is a mobile workplace in which even the mobile dust extractor can be quickly integrated using the ex-tractor dock.
X Beneficial arrangement – tools, materials and mobile dust extractors are always neatly stored and on hand
X Mobile equipment – simple transport between different places of use in the workshop
X Firm support – the mobile dust extractor is secured by the extractor dock
X Secure – lockable cabinet for SYSTAINER up to size 3 for storing machines and accessories
X More space – devices and hose holders keep the storage areas free for the work equipment
Toolcenter TC 3000/2
Flexibility and extra work space.
Clearly arranged – the abrasive can be stored on the rear wall and is within reach.
www.festool.co.uk 19
2010_GB_en_FB_WorkplaceOrg.indd 19 25.01.11 09:36
1
9
2
10
3
11
4
12 1413
Vacuum clamping system | Multifunction table
Accessories and consumable materials.
VAC SYS Scope of delivery Order No.
VAC SYS Set SE 1 GB 240V Vacuum pump VAC SYS VP in SYSTAINER SYS 3, vacuum clamping unit VAC SYS SE 1 with vacuum pad VAC SYS VT D 215 mm, vacuum hose and foot valve in SYSTAINER SYS 4
712257
VAC SYS SE 2 Vacuum clamping unit VAC SYS SE 2 with vacuum pad VAC SYS VT 275 x 100 mm, vacuum hose and connector in SYSTAINER SYS 4
580062
Vacuum pump VAC SYS VP GB 240V in SYSTAINER SYS 3 580072
Multifunction table MFT 3
Vacuum clamping system VAC SYS
Clamping workpieces
Stability | Precision Clamping workpieces
VAC SYS accessories Scope of delivery Order No.
1 Vacuum pad VAC SYS VT 200 x 60 oval, 200 x 60 mm 580064
2 Vacuum pad VAC SYS VT 277 x 32 narrow, 277 x 32 mm 580065
3 Vacuum pad VAC SYS VT 275 x 100 oval, 275 x 100 mm 580066
4 Vacuum pad VAC SYS VT D 215 round, Ø 215 mm 580067
5 Adapter VAC SYS AD-MFT 3 for securing the VAC SYS to the multifunction table MFT 3 494977
6 Foot valve VAC SYS FV for releasing the vacuum pad 580063
7 Vacuum hose D 16 x 5 m VAC SYS Length: 5 m 495293
8 Accessories Systainer VAC SYS VT Sort includes vacuum pad VAC SYS VT 200 x 60 mm, VAC SYS VT 277 x 32 mm, VAC SYS VT 275 x 100 mm and has space for the vacuum pad VAC SYS VT D 215
495294
20
2010_GB_en_FB_WorkplaceOrg.indd 20 25.01.11 09:36
86 75
15 16 17
MFT 3 Scope of delivery Order No.
Table with perforated board and foldaway legs, angle stop, guide rail adapter FS 1080/2, swivel unit, storage unit, adjustable stop, additional clamp, deflector FS-AW, in a box
495315
MFT 3 accessories Scope of delivery Order No.
9 Adjustable stop MFT 3-AR for securing workpieces on the angle stop, can be folded up 495542
10 Additional clamp MFT 3-ZK for securing the stop rail to the V-groove 495541
11 Cross brace MFT 3-QT for additional support for the table, pack of 2 495502
12 Fixed clamps MFT-SP for secure and precise fixing of the workpiece, pack of 2 488030
13 Fastening clamps FSZ 120 polished steel version, clamping width: 120 mm, pack of 2 489570
Fastening clamps FSZ 300 polished steel version, clamping width: 300 mm, pack of 2 489571
14 Lever clamp FS-HZ 160 polished steel version, clamping width: 160 mm, pack of 1 491594
15 Guide extension MFT 3-VL makes possible use of CMS modules, foldaway legs, safety main switch, cable and power outlet 495513
16 VS connecting piece for connecting several MFT 3 484455
17 Perforated board MFT 3-LP Dimensions: length x width 1102 x 718 mm 495543
More system accessories and consumables are available at www.festool.co.uk or in the main catalogue.
Extension | System connection
Extension | System connection
VAC SYS SE 2
www.festool.co.uk 21
2010_GB_en_FB_WorkplaceOrg.indd 21 25.01.11 09:36
1
9 10 11 12
432
Guide rail
Accessories and consumable materials.
Guide rail Scope of delivery Order No.
Guide rail FS 800/2 Length: 800 mm 491499
Guide rail FS 1080/2 Length: 1080 mm 491504
Guide rail FS 1400/2 Length: 1400 mm 491498
Guide rail FS 1900/2 Length: 1900 mm 491503
Guide rail FS 2400/2 Length: 2400 mm 491502
Guide rail FS 3000/2 Length: 3000 mm 491501
Guide rail FS 5000/2 Length: 5000 mm 491500
Guide rail FS FS 1400/2-LR32 with series of holes, length: 1400 mm 496939
Guide rail FS 2424/2-LR32 with series of holes, length: 2424 mm 491622
Guide rail accessories Scope of delivery Order No.
1 Quick-action clamp FS-RAPID/1 clamping jaws, fixed jaws, for clamping and positioning Festool guide rails FS and FS/2, pack of 1
489790
2 Fastening clamps FSZ 120 polished steel version, clamping width: 120 mm, pack of 2 489570
Fastening clamps FSZ 300 polished steel version, clamping width: 300 mm, pack of 2 489571
3 Lever clamp FS-HZ 160 polished steel version, clamping width: 160 mm, pack of 1 491594
4 GECKO DOSH dual suction pad set DOSH-FSAD adapter, GECKO DOSH dual suction pad, load capacity: 50 kg 493507
GECKO DOSH dual suction pad load capacity: 50 kg 492617
Adapter DOSH-FSAD for attaching guide rail FS/2 to the GECKO dual suction pad 492616
Suction pads DOSH-SGT-S 493307
FS guide rail
Stable base Protection | Storage
Clamping | Fixing
22
2010_GB_en_FB_WorkplaceOrg.indd 22 25.01.11 09:36
6
13
7
14 15
85
Guide rail accessories Scope of delivery Order No.
5 SYSTAINER accessories FS-SYS/2 2 fastening clamps FSZ 120, deflector FS-AW, combination bevel FS-KS, kickback stop FS-RSP, connecting piece FSV, splinterguard FS-SP 1400, Systainer size SYS 1 T-LOC
497657
6 Combination bevel FS-KS for FS/2, for angled cuts with the guide rail between 0° and 180° 491588
7 Kickback stop FS-RSP for TS 55, TS 75, ATF 55, AP 55, AT 65, AP 65, AP 85, used as a rear or front position stop on guide rail FS/2, can also be used as a guide stop
491582
8 Splinterguard FS-SP 1400/T replacement splinterguard for guide rails FS and FS/2, transparent, length: 1400 mm 495207
Splinterguard FS-SP 5000/T replacement splinterguard for guide rails FS and FS/2, transparent, length: 5000 mm 495209
9 Slideway lining FS-GB 10M replacement slideway lining for guide rail, FS/2, 10 m roll 491741
10 Adhesive cushion strip FS-HU 10M replacement adhesive cushion strip for guide rails FS and FS/2, 10 m roll 485724
11 Bag FS-BAG for guide rails up to length FS 1400/2, carrier bag with shoulder strap, in a box 466357
12 Deflector FS-AW prevents suction hoses and cables from catching on the end of the guide rail 489022
13 Connector FSV connects two guide rails for longer workpieces, pack of 1 482107
Stopper LA-LR 32 FS for hole distance 9.5; 16; 32 mm, for connecting two perforated rails 496938
14 Parallel stop FS-PA stop ruler, clamp, adjustable stop, for sawing to width, adjustable repeat size using a scale and adjustable stop, assembly on guide rail without using any tools, max. workpiece width: 650 mm, pack of 2
495717
15 Extension FS-PA-VL bridge, stop ruler, scale, can only be used in connection with FS-PA, max. workpiece width: 195 mm, max. material thickness: 70 mm, pack of 2
495718
More system accessories and consumables are available at www.festool.co.uk or in the main catalogue.
Extension | System connection
Precision
www.festool.co.uk 23
2010_GB_en_FB_WorkplaceOrg.indd 23 25.01.11 09:36
87 9 10
11 12 13 14
6
1 2 3 4/5
Energy box | Boom arm | Toolcenter TC 3000/2 | Workcenter
Accessories and consumable materials.
Upgrade from EW to EW/DW possible with compressed air supply unit
* EW= for use of power tools
EAA-EW energy box*
EAA-EW/DW energy box*
Toolcenter TC 3000/2
Workcenter WCR 1000
Holder: Machine | HoseArrangement: Hanging
Arrangement: Hanging
Installation options
Compressed air supply
EW/DW= for use of power tools and/or compressed air tools
24
2010_GB_en_FB_WorkplaceOrg.indd 24 25.01.11 09:37
15 16
Toolcenter Scope of delivery Order No.
TC 3000/2 hose holder, rubber mat, mobile sanding workplace with large working and storage area, lockable tool cabinet with intermediate base for storing Systainers and Sortainers, extractor dock with bracket attachment for CT, CTL, CTM 22/26/33/36, SR 200 and SR 45 with strap (accessory)
583881
Energy box Scope of delivery Order No.
Energy box, EAA EW/DW TURBO/M-GB manual slide actuation; energy box with 3 x 230 V connections; compressed air supply unit with 3 compressed air connections (2 x oiled and 1 x not oiled); 2 sandpaper holders
583818
Workcenter Scope of delivery Order No.
Workcenter WCR 1000 Base plate with Sys-Dock interface and Systainer holder, 2 grooved aluminium profiles, stepless height adjustment, 2 profiled covers, 2 pegboards with square holes, storage shelf with 2 rails and 6 screwdriver holes, incl. holder, universal hook, 6 standard hooks for square holes, 125 mm long, tip bent 90°, 1x machine holder for 2 machines (V shape), with hose holder function, storage trough with holder for 80 mm wide sanding pad, storage base for pegboard
497471
Energy box accessories Scope of delivery Order No.
1 Ceiling suspension EAA-D-EU for energy box (models from 2009), cable set 2.5 m, compressed air hose 2.5 m, bracket
495890
2 Wall mounting EAA-W-EU for energy box (models from 2009), cable sets 4 m, compressed air hose 4 m, aluminium tube with reducing sleeve
495889
3 Boom arms ASA
ASA 2500 CT/SR-EU for CT mobile dust extractors and SRM extractors, swivellable arm with wall console, cable duct, no elements for wall mounting
583866
4 ASA 5000 CT/SR-EU for CT mobile dust extractors and SRM extractors, double-jointed arm with wall console, cable duct, no elements for wall mounting
583867
5 ASA 6000 CT/SR-EU for CT mobile dust extractors and SRM extractors, double-jointed arm with wall console, cable duct, no elements for wall mounting
583868
6 Mobile dust extractors see catalogue, Internet, product range for dust extraction
Toolcenter accessories Scope of delivery Order No.
7 Rear wall TC 3000 RW for Toolcenter TC 3000, TC 3000/2, incl. 10 hanging hooks, dimension: length x width 990 x 340 mm
452986
8 Tool holder WHR/D-TC for TC 2000, TC 3000, TC 3000/2, for safe and ergonomic storage of up to two power or compressed air tools
493415
9 Hose holder TC-SH for the TC 2000, TC 3000, TC 3000/2 487304
10 Service unit VE-TC 3000 for TC 3000, TC 3000/2, for compressed air supply for mobile dust extractors CTL, CTM 22/26/33/36 and dust extractors SR 151, SR 200 series in LE design
454808
Workcenter accessories Scope of delivery Order No.
11 Key WCR 1000 PF the keys make possible the assembly of individual accessories at the profiled nut, pack of 2
497476
12 Universal hook WCR 1000 UH 497473
13 Square hooks WCR 1000 SHQ 497475
14 Tool hook WCR 1000 WH 497474
15 Storage shelf WCR 1000 PT 497472
16 Storage base WCR 1000 AB 497477
More system accessories and consumables are available at www.festool.co.uk or in the main catalogue.
Arrangement: Place | Position
www.festool.co.uk 25
2010_GB_en_FB_WorkplaceOrg.indd 25 25.01.11 09:37
2 3
1
SYSTAINER | SORTAINER | Systainer-Port | Roll board
Accessories and consumable materials.
SYS MINI
SYS 1/DF*
SYS 2/DF*
SYS 3/DF*
SYS 4/DF*
SYS 5
SYS MAXI
SYS 3-SORT/4
SYS 3-SORT/6
SYS 3-SORT/9
SYS 3-SORT/12
* DF = SYSTAINER with lid compartment
SYS-PORT 500/2
Roll board
SYS-PORT 1000/2
Every handle is a success – order reigns in a SYSTAINER for abrasives. The right abrasive, the right grit is found imme-diately. Available for the most diverse abrasive dimensions, whether it‘s round, rectangular or triangular.
Special equipment – SYSTAINER with foam and wooden inserts, as well as a SYSTAINER with removable plastic containers to safely store small parts, cutters and manual tools. All inserts are also available separately.
26
2010_GB_en_FB_WorkplaceOrg.indd 26 25.01.11 09:37
SYSTAINER Scope of delivery Order No.
SYS MINI 460853
SYS 1 TL 497563
SYS 1 TL-DF with lid compartment 497851
SYS 2 TL 497564
SYS 2 TL-DF with lid compartment 497852
SYS 3 TL 497565
SYS 3 TL-DF with lid compartment 498390
SYS 4 TL 497566
SYS 5 TL 497567
SYS MAXI 490701
SYS MAXI 2 492582
SYSTAINER T-LOC with lid compartment Scope of delivery Order No.
SYS 1 TL-DF with lid compartment 497851
SYS 2 TL-DF with lid compartment 497852
SYS 3 TL-DF with lid compartment 498390
SYSTAINER accessories Scope of delivery Order No.
1 Additional hand grip ZSG-SYS 1/2 TL/1 for SYSTAINER SYS 1 and 2 T-LOC, for carrying SYS 1 and 2 T-LOC upright
497856
Roll board Scope of delivery Order No.
Roll board RB SYS 1-5 for transporting SYSTAINER in sizes 1–5 and SORTAINER, with 4 ball bearing-mounted steering rollers and locking brake, max. load: 50 kg
492388
SORTAINER Scope of delivery Order No.
2 dividers per drawer, dimensions (L x W x H) 395 x 295 x 210 mm
SYS 3-SORT/4 small drawer (L x B x D) 255 x 75 x 30 mm, medium drawer (L x B x D) 255 x 165 x 30 mm, large drawer (L x B x D) 255 x 255 x 85 mm, 2 small drawers, medium drawer, large drawer, 6 label holders, 8 label strips, weight: 4.0 kg
491522
SYS 3-SORT/6 medium drawer (L x B x D) 255 x 165 x 30 mm, 6 medium drawers, 6 label holders, 8 label strips, weight: 4.9 kg
491984
SYS 3-SORT/9 small drawer (L x B x D) 255 x 75 x 30 mm, me-dium drawer (L x B x D) 255 x 165 x 30 mm, 6 small drawers, 3 medium drawers, 9 label holders, 16 label strips, weight: 5.1 kg
491985
SYS 3-SORT/12 small drawer (L x B x D) 255 x 75 x 30 mm, 12 small drawers, 12 label holders, 16 label strips, weight: 5.3 kg
491986
Systainer-Port Scope of delivery Order No.
Systainer-Port SYS-PORT 500/2 no approval for installation in trucks, stable steel plate body, 5 label fields for drawers, with 3 Systainer pull-out drawers, without SYSTAINER
491921
Systainer-Port SYS-PORT 1000/2 no approval for installation in trucks, stable steel plate body, 5 label fields for drawers, with 5 Systainer pull-out drawers, with set of castors, 4 ball bearing-mounted steering rollers (2 have locking brake), without SYSTAINER
491922
Systainer-Port accessories Scope of delivery Order No.
2 Telescopic drawer SYS-PORT/TA/2 5 labels for drawers 491923
3 Set of castors SYS-Port R/2 for mobile use of the Systainer-Port, 4 ball bearing-mounted steering rollers (2 have locking brake), diameter: 75 mm
491932
More system accessories and consumables are available at www.festool.co.uk or in the main catalogue.
Secure storage and can be used at any time – for each machine there is a SYSTAINER with customised inserts. The machines are thus stored neatly and protected against impacts and dust. Together with all the required accessories they are ready for transportation at any time; long tooling times are dispensed with.
www.festool.co.uk 27
2010_GB_en_FB_WorkplaceOrg.indd 27 25.01.11 09:37
FestoolWorkplace organisationValid from 02/2011
Order No. 61177
Errors and omissions excepted. Products may differ from those pictured. Created for TTS Tooltechnic Systems AG & Co. KG, 73240 Wendlingen, 12/2010
www.festool.co.uk
TTS Tooltechnic Systems AG & Co. KG Wertstraße 20 D-73240 Wendlingen
represented by:
TTS Tooltechnic Systems GB Ltd Saxham Business Park Saxham Bury St Edmunds Suffolk IP28 6RX Great Britain Phone: +44 (0) 1284 760791 Fax: +44 (0) 1284 702156 E-mail: [email protected]
in Ireland:
Registered office address: TTS Tooltechnic Systems Ltd c/o McCann Duffy Cleary E12 Calmount Park Ballymount Dublin 12 Place of registration: Ireland Company No.: 133724
Phone +353 1 8642240 Fax +353 1 8642247 E-Mail [email protected] Web www.festool.ie
Festool service: Original from Festool with extended warranty of 3 years and comprehensive services. Visit www.festool.co.uk for more information
Our tools live up to the claim “Made in Germany” – Tools for the toughest demands. Visit www.festool.co.uk for more information
Old tool return, recycling, waste prevention. For a cleaner environment.Visit www.festool.co.uk for more information
Dealer
2010_GB_en_FB_WorkplaceOrg.indd 28 25.01.11 09:37