wireless scanner manual v2.2(181124)download.gzxlscan.com/pdf/nt-1698w_v2.2.pdf · 2019-01-04 ·...
TRANSCRIPT
Ver2.2
Wireless Laser Scanner Manual
Long distance wireless communication
Fast decoding speed with a large battery capacity
Built-in FLASH memory, supports breakpoint resume
Store 2000 pieces Code-128 codes under store mode
Supports Windows XP, Win7/8, Wince etc.
Package included:
* Scanner x 1* USB Cable x 1* Receiver x 1* Manual x 1
Barcode Scanner Overview
Operation Instruction:
1. Choose Communication ModeWorking via USB CableConnect scanner with your device via USB cable. If you use US keyboard, it's plug and play. If you use other type of keyboard , please refer to ‘keyboard language ’to con�igure the keyboard language before use it.
Working via USB receiverPlug the USB receiver on your device, then you can start to use it. US keyboard is con�igured by default. If you use other type of keyboard , please refer to ‘keyboard language’ to con�igure the keyboard language before you use it.
2. Get started to scan normal barcode① Scan barcode in a correct angel (±45+60°)
② Moving scanner towards the barcode back and forth to �ind the best scanning distance.
- 1 -
2.4 GHz USB Receiver
USB Cable
USB receiver wasplugged in the bottom
3. LED and Beeper Indication
Successful Scan Buzzer LEDYes
Failed
One beep
Three beeps
Five beeps
Light On then OFF
Light �lash once then OFF
Important Note:
When scanner makes three beeps please con�igure the channel for it. Refer to 'Con�igure Working Channel'.
When scanner makes �ive beeps please charge power for it for 3-4 hours until the LED light turns to solid blue.
Our barcode scanners are factory programmed for common terminal and communications settings. If you need to change these settings, programming is accomplished by scanning the bar codes in this guide. An asterisk (*) next to an option indicates the default setting.
When you connect the scanner to the Host via a USB connection, you can enable the USB-KBW feature by scanning the barcode below. It works on a Plug and Play basis and no driver is required.
Barcode Programming
Communication ModeUSB -KBW *
- 2 -
USB -KBW *
In order to output the codes in a correct way after you scan a normal barcode, you have to con�igure the keyboard language before you use it.
For exampleIf you use French Keyboard, scan command barcode of "French Keyboard", after that scanner will output barcodes according to French keyboard layout. US Keyboard is con�igured by default, if you use a US keyboard you can ignore thisthis step.
Keyboard Language
- 3 -
US Keyboard*
Germany Keyboard
Portugal Keyboard
Turkey Keyboard UK keyboard
Spain Keyboard
Italy Keyboard
French Keyboard
Scanning this bar code will enable the scanner to enter manual trigger mode.
Scanning Mode
The scanner provides a shortcut for con�iguring the terminating character suf�ix to CR or CRLF and enabling it by scanning the appropriate barcode below.
Terminator
Trigger Mode (Default)
This mode enables the engine to scan/capture, decode and transmit over and over again.
Continuous Mode
- 4 -
Trigger Mode
Continuous Mode
Add Enter as terminator
Add TAB as terminator
No terminator
If you are heading for a working area which lies outside the signal range, you may activate store mode of the scanner. Under store mode, all scanned data will be stored directly into the buffer memory of the device. Furthermore, the data entries will be permanently saved in the buffer memory prior to the manual upload into the working station, so that you may upload them time and again to your liking.
1. By scanning the following barcode, the store mode will be activated
2. By scanning the following barcode, all data in the buffer memory will be deleted
3.By scanning the following barcode, all data entries in the buffer memory can be uploaded after reconnecting to the working station .
4. By scanning the following barcode, the gross quantity of the uploaded data entries will be summarised .
Working Mode (Only apply for wireless mode)
- 5 -
Store Mode
Clear All Memory
Uploading the Data
Summarising of Uploaded Data Entry Quantity
5. By scanning the following barcode, the device leaves the store mode, data will be outputed immediately the moment when you scan a barcode.
Con�igure Idle timeScanner will stay awake during the idle time that you set for it and turn to sleep if you haven't used it during the whole idle time.
Sleep Mode can be disabled by scanning below command barcodes
- 6 -
Quick Store Mode*
$RF#ST02Idle Time- 1 Min
$RF#ST20Idle Time- 10Min
$POWER#OFFPower Off
$RF#ST00Disable Sleep Mode
$RF#ST60Idle Time- 30Min
$RF#ST06Idle Time- 3 Min
When scanner makes three beeps please con�igure channel to rebuild the connection between scanner and receiver.
Con�igure the channel
Make sure you have removed the USB cable from the scanner before you con�igure the channel1. Scan one of below channel after that scanner will make beep beep... sound.2.Plug the USB receiver, the beep sound will stop immediately. (Con�igure successfully)
Steps:
- 7 -
Factory Restore
Start Wireless Scan
Con�igure the scanner to revert all con�igurations to factory defaults when unkown issues have happened .
If there's beep sound after you scan a normal barcode but can not ouput any data please scan below command barcode to start wireless scan.
Check scanner VersionScanned below command bercode to check the scanner's version.
- 8 -
Factory Restore
Start Wireless Scan
Scanner Version
01400Disable Pre�ix Code ID*
01401Enable Pre�ix Code ID
0B140Disable Suf�ix Code ID*
01402Enable Suf�ix Code ID
Con�igure Code IDA code ID character identi�ies the code type of a scanned bar code. This can be useful when decoding more than one code type. The code ID character is inserted between the pre�ix character (if selected) and the decoded symbol.
- 9 -
01261Enable Code 11
01321Enable Code11 Multi-Veri�ication
00221Enable Code39
00251Enable transmit Code39 check digit
00250Disable transmit Code39 check digit
00220Disable Code39
01320Disable Code11 Multi-Veri�ication
01260Disable Code11
Symbologies
Code 11
Code 39
Users usually need to know barcode type in the process of scanning
- 10 -
Code 32
Code 93
Enable FULL ASCII
Transmit Code 39Start/Stop Character
Enable Code39 Multi-Veri�ication
Enable Code32
Enable Code93 Disable Code93
Disable Code32
Disable Code39 Multi-Veri�ication
Do not Transmit Code 39Start/Stop Character
Disable FULL ASCII
- 11 -
00231 00230
00281 00280
00331 00330
00261 00260
00621 00620
- 12 -
Enable Code93 Multi-Veri�ication
Enable Code128
Enable Code128 Multi-Veri�ication
Enable Codabar Disable Codabar
Disable Code128 Multi-Veri�ication
Disable Code128
Disable Code93 Multi-Veri�ication
Code 128
Codabar
00681 00680
00691 00690
00841 00840
00851 00850
- 13 -
Transmit CodabarStart/Stop Character
Enable Codabar Multi-Veri�ication
Enable Interleaved 2 of 5
Enable Interleaved 2 of 5Multi- veri�ication
Enable Industrial 2 of 5 Disable Industrial 2 of 5
Disable Interleaved 2 of 5Multi- veri�ication
Disable Interleaved 2 of 5
Disable Codabar Multi-Veri�ication
Do not Transmit CodabarStart/Stop Character
Interleaved 2 of 5
Industrial 2 of 5
00861 00860
00951 00950
00961 00960
01051 01050
01061 01060
Enable Industrial 2 of 5Multi- veri�ication
Enable China Post
Enable MSI
Enable MSI Multi-Veri�ication
Enable EAN-8 Disable EAN-8
Disable MSI Multi-Veri�ication
Disable MSI
Disable China Post
Disable Industrial 2 of 5Multi-veri�ication
China Post
MSI
EAN-8
- 14 -
01141 01140
01571 01570
01151 01150
01251 01250
00371 00370
Transmit EAN-8 check digit
Enable EAN-13
Transmit EAN-13 Check Character
Enable Convert EAN-13 to ISBN
Enable Convert EAN-13 to ISSN Disable Convert EAN-13 to ISSN
Disable Convert EAN-13 to ISBN
Do not Transmit EAN-13Check Character
Disable EAN-13
Do not transmit EAN-8 check digit
EAN-13
- 15 -
00471 00470
00361 00360
00461 00460
00481 00480
01501 01500
Enable UPC-A
Transmit UPC-A check digit
Enable Convert UPC-A to EAN-13
Enable UPC-E
Transmit UPC-E check digit Do not transmit UPC-E check digit
Disable UPC-E
Disable Convert UPC-A to EAN-13
Do not transmit UPC-A check digit
Disable UPC-A
UPC-A
UPC-E
- 16 -
00341 00340
00421 00420
00391 00390
00351 00350
00431 00430
Enable Convert UPC-E to UPC-A
*Disable UPC/EAN Add-on Digits
Enable 5-Digit Add-On Code
Enable UPC/EAN Multi- veri�ication Disable UPC/EAN Multi-veri�ication
Enable UPC/EAN 2 or 5 DigitAdd-on Code
Enable UPC/EAN 2-Digit Add-on Code
Disable Convert UPC-E to UPC-A
UPC/EAN Add-on Digits
- 17 -
00381 00380
00550 00551
00552 00553
00541 00540
Con�igure Pre�ix or Suf�ix1. Scan code 'add suf�ix'. This step will clear all previous suf�ix con- �iguration. Maximum you can add 32 codes.
Add Suf�ix0C002
Con�igure Pre�ix or Suf�ixAdd Pre�ix1. Scan code 'add pre�ix'. This step will clear all previous pre�ix con- �iguration. Maximum you can add 32 codes.
2. Scan related pre�ix codes to con�igure the pre�ix.
For example :① If you want to add 'MG' as pre�ixes, �irst scan code of M then scan Code of G.
② Scan 'Test' , there're pre�ixes of MG before Test. That's MGTEST.
- 18 -
Add Pre�ix
M G
0C001
$4D
TEST
$47
Hide Front/Back Codes
For example
Hide Front CodesScan barcode of ' Hide Front Codes'. All previous con�iguration will be cleared.
Scan the number that you want to hide. Maximum can hide 32 codes.
If you want to hide front 2 codes, scan code of $02
2.Scan related suf�ix codes to con�igure the suf�ix.
For example :
①If you want to add 'MG' as suf�ixes, �irst scan code of M then scan Code of G.
② Scan 'Test' , there're suf�ixes of MG after Test. That's TESTMG.
- 19 -
M G$4D $47
Scan test code '123456789' then you will get the result 3456789
Scan the number that you want to hide. Maximum can hide 32 codes.
Hide Back CodesScan barcode of ' Hide Back Codes'. All previous con�iguration will be cleared.
For exampleIf you want to hide 2 codes from the end, scan code of $02
Scan test code '987654321' then you will get the result 9876543.
- 20 -
Hide Number xth Code from the front
For example
Scan barcode of ' 0C005'. All previous con�iguration will be cleared.
Scan the number code of the position that you want to hide.
If you want to hide the second code from the front, scan code of $02
Scan test code '987654321' then you will get the result 97654321.
- 21 -
Appendix A
No. Code ID Barcode Type Code Barcode Type
CODE 128
EAN 8
EAN 13
ISBN
UPC-A
UPC-E
CODE 93
GS1 Omnidirectional
GS1 Limited
GS1 Expanded
CODE 39
Interleaved 2 of 5
Industrial 2 of 5
China post
Matrix 2 of 5
MSI
CODE 11
Codebar
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
A
C
D
D
E
F
I
J
K
L
M
N
O
P
Q
S
U
V
00/01
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Appendix B:
- 22 -
0C001Add Pre�ix
0C002Add Suf�ix
0C003Hide Front Codes
0C004Hide Back Codes
- 23 -
- 24 -
- 25 -
- 26 -
FAQ1.Some barcodes can not be read,why ?a. Dirty or unclear barcodes might not be read.b. Digital barcode displayed on phone, computers or tablets can’t be read by laser scanner.
- 27 -
c. The possible reason is that the con�iguration for some barcode types are not commonly used is off by default. You need to activate a speci�ic barcode type to get it to work. Please contact the customer service team for help.d. Scanner can not read 2d (QR, Datamatrix,PDF417)2. Is there any barcodes for appling or remove suf�ix ? Yes, please refer to the manual on the part of 'con�igure pre�ix or suf�ix.3. The data can not be sent to my computer. Why?a. Please make sure scanner has quit from store mode. Because it will store your scans internally instead of instantly transmitting them to the connected device. You need to scan the 'uploading the data' to send the scanned codes to your connected device.b. The scanner has disconnected with the USB receiver (It will make 3 beeps when you scan the normal barcode and data can not be uploaded). In that case please refer to the part of 'con�igure the channel'.4. There’s laser beam but scanner can not read any barcode or it makes 5 beeps after read a barcode. In this case,please charge power for the scanner immediately. Scanner can not read any barcode when it’s under low voltage.
Support
Contact Information
For any inquiries please do not hesitate to contact us.
Tel.: +0086 20-6626-0708Email: [email protected]: [email protected].: Unit 137, The Paci�ic Industry Park, Xintang Town, Zengcheng District, Guangzhou, China/511340
- 28 -