79124

Wireless Camera Kit for TETRIX®Quick-Start Guide

Content advising by Paul Uttley and Lacey O’Brien.

Desktop publishing and photography by Todd McGeorge.

©2020 Pitsco, Inc., 915 E. Jefferson, Pittsburg, KS 66762

All rights reserved. This product and related documentation are protected by copyright and are distributed under licenses restricting their use, copying, and distribution. No part of this product or related documentation may be reproduced in any form by any means without prior written authorization of Pitsco, Inc.

All other product names mentioned herein might be the trademarks of their respective owners.

Check Pitsco.com/Wireless-Camera-Kit-for-TETRIX-MAX for PDF updates to this guide.V1.0

04/20

What’s IncludedCamera

• Compact color camera with built-in 25 mW video transmitter

• Servo Y connector

Receiver

• 5.8 GHz 32 CH wireless FPV receiver

• RCA cabling

• DC power cable

Camera

Features• Micro size and lightweight (4.5 g)

• 37 CH VTX

• Easy plug-and-play installation

• Push-button control instead of a switch to change channels

• Powered by 2.5-5 V that can plug directly into the R/C receiver

Operation• Plug power cable into the R/C receiver and observe proper polarity.

• Notice two rows of LED indicators: 5 for band (top row), 8 for channel frequency (bottom row).

• Use push button to select band and frequency.

• A short button press changes channel; a long press (push and hold) changes band.

• Mount camera to robot using hook-and-loop fastener or other securing method.

• Be sure to not touch the exposed backside of the camera to any metal surfaces that could cause an electrical short.

• Do not cover the backside of the camera. The camera transmitter produces heat and needs to be able to vent to open air.

SpecificationsTransmitter power 25 mW

Input power 2.5-5 V

Camera resolution 600 TVL

Min illumination 1 lux

Field of view 140-degree viewing angle

Antenna dimensions 20 mm x 25 mm diameter

Antenna 3 lobe right hand circular polarized

Video output NTSC

Frequency 5.8 GHz, 5 bands, 37 channels

Raceband 5658-5917

Size 21 mm x 19 mm x 17 mm (excluding antenna)

Weight 4.5 g

ConnectionConnect the camera to the battery port or any unused servo channel. If an open port is not available, the servo Y connector (included) can be used to power the camera and a servo in parallel. Be sure to observe proper power polarity.

Camera Diagram

Band/Channel Button

BAND

CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8

F 5740 5760 5780 5800 5820 5840 5860 5880

E 5705 5685 5665 5665 5885 5905 5905 5905

A 5685 5845 5825 5805 5785 5765 5745 5725

R 5658 5695 5732 5769 5806 5843 5880 5917

B 5733 5752 5771 5790 5809 5828 5847 5866

F E A R B

CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8

Channels

Use the Y connector, if needed, to power the camera and a servo in parallel.

Receiver

Camera

Servo

Be sure to mount your camera as far away as possible from interference-causing devices on your robot such as DC and servo motors.

Features• 32 channels: Cover A, B, E, F and R bands

• Two switching buttons: CH button for channel selection, FR button for frequency band selection

• Displays two digits: LED 1 displays frequency (FR) band; LED 2 displays channel (CH) selection

• Independent video and audio signal outputs

• Audio/video cables

• 5.8 GHz antenna

Operation

Specifications

RC8325.8 G Wireless

Receiver

Sensitivity ≤-90 dBm

Working Frequency ISM 5.8 GHz

Available Channel 32 CH

Power Supply DC 12 V

Consumption Current 200 mA max

Antenna Input Impedence 50 Ω Typ

Antenna Connector SMA

Antenna Gain 2 dBi

Video Output Level 1.0 V p-p Typ, 75 Ω

Audio Output Level 1.0 V p-p Typ, 10 KΩ

Audio Carrier 6.5 MHz

Type Standard NTSC/PAL

Dimension (L x W x H) 80 mm x 65 mm x 15 mm

Weight 85 g

Receiver

FR_LED CH_LED

ANT

CH

FR

AV_OUT1 AV_OUT2 DC_IN

Frequency and Channel TablePower on and set the frequency (FR button) and channel (CH button) to match your camera settings.

FR_LED displays frequency/band.

CH_LED displays channel.

ConnectionConnect receiver to an external monitor with A/V composite input as shown.

BAND CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8

FR1/Band A 5865M 5845M 5825M 5805M 5785M 5765M 5745M 5725M

FR2/Band b 5733M 5752M 5771M 5790M 5809M 5828M 5847M 5866M

FR3/Band E 5705M 5685M 5665M 5645M 5885M 5905M 5925M 5945M

FR4/Band F 5740M 5760M 5780M 5800M 5820M 5840M 5860M 5880M

FR5/Band r 5658M 5695M 5732M 5769M 5806M 5843M 5880M 5917M

HAVE QUESTIONS?There are a variety of ways

to get in touch with us:Call us at 800-358-4983.

Email us at orders@pitsco.com.Chat with us on Pitsco.com/support.

Wireless Camera Kit for TETRIX®Quick-Start Guide