wipers minicat

7/21/2019 Wipers Minicat

1/16


2/1622 (800) 221-36732 (800) 221-3673

1940 Coupe-Sedan shown.

Every component of our wiper tower kitsis carefully inspected, hand assembledin our shop and checked for f lawlessfunction. Complete assemblies ready toinstall on wiper motor.

The chrome on our wiper tower baseis beautiful and the dimensions areidentical to the originals. Includes RH & LHassemblies with mounting hardware.

1937-1940 Car Wiper Tower Kits

7BIGREASONSwhy

BobsWiper

Towerskeepthebeat

WIPER SHAFTS

Precision machinedspline & threaded.

7TOWER BASES

Die-cast, withtriple-plated chrome.

1

DRIVE CHAINSpecial stair-stepchain like original.6

3 DRIVE SPROCKETSDie-cast pivot link forshaft, chain & drive arm.

5

PIVOT SHAFT

CNC-machined steel.

DRIVE LINK

Steel pivot ball castin sprocket arm.

2

DRIVE ARMS

Die-stamped steel.Zinc plated.

4

1937-39 Convertible & Station Wagon

78-17552/3

All Kits IncludeMounting Hardware, Tower Base Pads

& Wiper Arm Nuts

Your Choice $175.00 kit

193740 WIPER SHAFT ENDBobs wiper towers will accept

Original Style & Style Armsthat use mounting nuts.

NarrowBase

1940Coupe & Sedan

1940-41 Sedan Delivery

01A-17552/3-D

NarrowBase

WidBas

1940 Convertible & Station Wagon

01A-17552/3-C


3/16www.bobdrake.comwww.bobdrake.com

WIPER ASSEMBLYPerfect copy of the original assembly. Includes wiper base gaskets, chromebezels and nuts, drive arm grommets with everything assembled. Can bemodified to fit 1941-42 & early 1946 Ford cars and other custom applications(18.5" between tower centers). Ready to install. Accepts original vacuummotor or Drakes 12-volt electric wiper conversion kit motor.

51A-17500 $175.00 each

Late194

6

1947-48

WIPER DRIVE ARM TO MOTOR GROMMET

51A-17562 $5.00 eachSee page 15

41

42-46

Small hole,no need forgrommet.

Hole

Mounts on cowl.

Mounts on cowl.

Larger hole,grommet51A-17562$5.00 each

Wiper Arm - Adapter BushingThese aluminum machined bushings

fit on the end of the tower shaftsand are attached with set screws.You must use push-on wiper arms. AK12 1941-48 "K58 Modern Arm "

Your Choice $8.00 each

Wiper Nut78-17481$15.00 pair

Wiper Nut78-17481

$15.00 pair

Chrome Plated Wiper KnobB-17513 $8.00

See page 14

Chrome PlatedWiper KnobB-17513 $8.00See page 14

Bezel78-17515$10.00 eachSee page 15

Hex Nut

Grommet11A-17541$3.00 eachSee page 15

Wiper Shaft

has a holeuses any B- wiperarms, see page 4

Roof Grommetsee page 15

LH RH

Typical 1932-37Wiper Motor

1937-38Wiper Motors

Typical 1939Coupe - Sedan

Wiper Assembly(mounts above windshield)

Wiper MysteriesFords

"

A

This wiper assembly uspush-on wiper arms


4/1644 (800) 221-36734 (800) 221-3673

OriginalHook

BladeConnector

1932-1948 Wiper Arms & Blades


B-17529-A 8"

B-17529-B 9"

B-17529-X 12"

$20.00 each 1937-40 Convertible& Station Wagon

1940 Coupe & SedanRH or LH

01A-17526 $25.00 each

1940-47 Pickup & Commercial

RH 01C-17526

LH 01C-17527

$25.00 each

1941-48 All Bodies

RH 11A-17526

LH 11A-17527

$25.00 each

OriginalStyle

OriginalStyle

1937-39 Coupe & Sedan- RH or LH

78-17529 $25.00 each

1932-36 All Bodies

NEW IMPROVEMENT

Now with more arm &blade pressure on glass

We are proud to offer our complete line of original style & hot rod wiper arms

& blades. They are detail perfect in every respect and will give you years of

clean dry windshields.

New from Bob. Custom cut to many sizes. Great for tall T s to 4" chops.Mounting end fits motors where the wiper shaft has a hole in it. Uses

78-17528-B or 21A-17528 blade to get the perfect custom fit.

Cut to Length and Build Your Own

12"

Cut herefor size

you need

Bent asoriginal

Bent as original

Wiper Arm Nut

78-17481 $15.00 pair

1932-19408" length

1941-19489" length

78-17528-B 1932-40 8" length

21A-17528 1941-48 9" length


9"

8"

Our blades have polished stainless steelframes and attaching clips. The difference is in

the rubber. The originals had a stack of die cut hardrubber to form the V blade. Ours is extruded of a softer

rubber and incorporates a T guard to protect the windshield glassagainst possible scratches from the stainless steel edge of wiper blade.

1932-48 Wiper BLades

1937-40 Car & 1937-47 Pickup

WIPER ARM NUTSHolds wiper arms to towers.

Polished stainless steel.

78-17481 $15.00 pair

1932-36

Allourwiperblades

areflatbecauseyou

r

windowisflat.None

ed

forflex-bridgeblade

s.



Each style mounts to the wiper pivot shafts just like the originals, but use the later style blades which

attach more securely. Designed especially for use with higher speed electric wiper systems, the blades offe

superior water removal for optimum wet weather visibility. Each kit comes with RH & LH arms and blades.

Original Mounting Ends with Modern Blades

1937-1948 Wiper Arm & Blade Kits

YESTERdAYSST

YLE-

TOdAYSTECHNO

LOGY

Specialty Power WindowsWiper System

This push-on style matchesoriginal and will fit

1941-48 All Body Styles

11A-17526/7-NK

KITS INCLUDE2 Stainless Arms 2 Stainless Wiper BladesArm dimensions shown from center of pivot to blade mounting dimple.

1937-40 Convertible & Station Wagon1940 Coupe & Sedan

01A-17526/7-NK

1940-47 Pickup

01C-17526/7-NK

RUBBER WIPER BLADE REFILLSRefills slide in and clip tight in place.Modern edge design offers superiorwater removal and long life.

78-17528-RF 8"

21A-17528-RF 9"

$5.00 each

WIPER ARM PIVOTMOUNTING ENDSSAME AS ORIGINAL

NEW IMPROVEMENT


Bent as original

Bent asoriginal

Wiper Arm Nut

78-17481 $15.00 pairSee page 4

Kit includes (2) 8" wiper blades

Kit includes (2) 9" wiper blades

Kit includes (2) 8" wiper bladesKit includes (2) 8" wiper blades

Small clip needs

to be pushed in to

install and remove

wiper arm.

1937-39 Coupe & Sedan

78-17526/7-NK

Wiper Blades8" - 9"

11A- Style Wiper Arm

Push clip

down and

hold.

Dimple

Wiper arm pivot mounting

end same as original.

Wiper arm pivot

mounting end

same as original.

Wiper arm pivot

mounting end

same as original.

Your Choice $65.00 kit


6/1666 (800) 221-36736 (800) 221-3673

A is the total length

including blade

These are simply modified versions of our beautiful, original style stainless arms, each now fitted with ousplined mounting bases so theyre perfect for use with the Specialty Wiper Systems shown below. Theyaccept and come with our later style stainless blades offering super secure attachment to the arms. Alsoperfect for many non-Fords using this system.

Specialty Wiper Arms & Blades

COMPLETE RH & LH KITS

2 Stainless Arms 2 Stainless Wiper BladesArm dimensions shown from center of pivot to blade mounting dimple.

$65.00 kit

Specialty Power Windows Wiper System

Small clip needsto be pushed in toinstall and remove

wiper arm.

All wiper arms onthis page feature thisstyle push on end.

DIMPLE

DIMPLE

DIMPLE

8"

FITSDIMPLE ON ARM

8" OR 9"

PUSH-ONENdWITHNEWS

NAP-IN

BLAdEdESIGN

01A-17526/7-SKS 5" Arm / 8"Blade 10"

01A-17526/7-SKL 5" Arm / 9" Blade 10"

11A-17526/7-NKS 9" Arm / 8" Blade 14"

11A-17526/7-NK 9" Arm / 9" Blade 14"

01C-17526/7-SKS 8" Arm / 8" Blade 13"

01C-17526/7-SKL 8" Arm / 9" Blade 13"

78-17526/7-SKS 7" Arm / 8" Blade 12"

78-17526/7-SKL 7" Arm / 9" Blade 12"

7"

5"

Centerof wiperarm shaft

A

A

A

A

FITSALLYE

ARS

FITSMANY

NON-FORDS

TOO!

DIMPLE

9"

A

You decideMeasure from the center line of yourwiper arm shaft in an arc across yourwindshield. Find the farthest pointwithout hitting the windshield frame,rubber or the opposite wiper blade.

NEW IMPROVEMENT




1937-1939CLOSED CAR

1937-1939

CONVERTIBLE & STATION WAGON

1940CLOSED CAR

1940CONVERTIBLE & STATION WAGON

1940-1947

PICKUP

1941-1948Car

Wiper Arm Positions

10 Big Reasons Why

Bobs Wiper ArmsAre UniqueNo other reproduction wiper arms are made

like Bobs. He uses the same exact design and

materials that Ford did. Other makers take big

short-cuts in design and quality. Bobs are

made using only the finest components

to assure long life and flawless function.

DONTGETCAUGHTINTHE

RAINWITHOUTEM!

STAINLESS STEEL RIVETS (strong, wont rust)

ROLLER BUSHINGS (smooth action)

4. Die-cast CHROMEPLATED HOUSING

(show quality plating)

5. STAINLESS STEEL COVER (highly polished)

6. STAINLESS STEEL

SPRING BAR (nice firm tension)

7. SPACER (added strength)

8. STAINLESS STEEL HOOK END (attaches and allows

proper blade wiping angle)

3. STEEL SPLINED INSERT(long life, no slippage)

9. Assembled by Drake

We added more down pressure.

2

13

4

5

6

7

8

9

10

Some other reprowiper arms donthave the rollerbearings. Bobs are

like the originalsgiving yousmooth action.

Unlike some other manufacturer

Bob uses a steel bushing withteeth to match up with thewiper shaft. This will keep it fromstripping out.


8/1688 (800) 221-36738 (800) 221-3673

Original Ford Accessories1932-36 Car

TANDEM WIPER KITAn affordable and easy way to get dual wipers which look like the original factory accessory units sold back in the day. Yourexisting single motor (vacuum or electric) actuates both using the linkage as shown. Kit has 2 arms, 2 blades, passenger sidepivot post and cross shaft. Easyto install. Adds value and function.

68-17574 $35.00 kit

THREADEDSWIVEL

PIVOT POST

CROSS SHAFT

ORIGINALHOOKSTYLE

OriginalAccessor

y

THREADEDSWIVEL

Universal

HAND WIPER ASSEMBLYAn excellent option for adding a wiper to closed or open cars where mountingspace is limited. This old-school setup offers simplicity and dependability with nopossible electrical failure and few moving parts. Its unlimited wiper speed andpark position is all up to the operator!

HR-17655-AR $25.00 each

1940

WIPER MOTOR & CONTROL

1941-48

CABLE & WIPER MOTOR SWITCHES

VACUUM

CABLE

OriginalStyle

Examplesof

originalpartsfrom

BobsCollections



1928-1936 Open Car, 1928-1939 Closed Car & Pickup

COMPACT 12 VOLT "MIGHTY WIPER" MOTORSAn excellent upgrade from the original vacuum units. Features adjustable arm-park and 32" power supply lead. Choose eithstraight drive shaft or threaded tapered drive shaft. Includes wiper arm nut, drive shaft bezel bushing, fuse and connector socwith complete installation instructions. A real problem solver in adding dependability and safety. Easy to install.

Use with above MW-17508-T Wiper Motor Kit

MightyWiper

Electric Wiper Motors

1932-36 Open Car1932-39 Closed Car & Pickup (with modification)

12VOLT WIPER MOTOR KITBuffed stainless steel cover. Designed to use your remote switIncludes stainless arm & blade. 1932-39 closed car & pickup requ

modification for mounting.A-17508-SS $50.00 kit

1932-36 Open Car1932-39 Closed Car & Pickup (with modification)

6 OR 12VOLT WIPER MOTOR

Single speed unit with black painted steel cover. On-off switchis mounted on the back of unit. 1932-39 closed car & pickuprequires modification for mounting.

A-17508-E6 6-Volt A-17508-E12 12-Volt

$50.00 eachWorks with our Mighty Wiper Straight Shaft Arm & Blade Kit(HR-70127) below, or for the original style arm and blade:

Wiper Blade

78-17528-B 8" length21A-17528 9" length

$10.00 each

Wiper Arm

B-17529 1932-36 $20.00 each

MOTOR WITHTHREADED TAPERED DRIVE SHAFeatures threaded shaft with chrome arm nut. Use

with our MW-17526-K arm and blade kit shown belo

MW-17508-T $140.00 each

MOTOR WITH STRAIGHT DRIVE SHAFTUse with our HR-70127 Wiper Arm and

Blade made specially for this application.

MW-17508-S $140.00 each

Use with above A-17508-E6/E12 or MW-17508-S

Wiper Motor Kits

MIGHTY WIPER STRAIGHT SHAFT ARM & BLADE KIT7.5" long arm holds 11" long blade (can be trimmed). Eachfeatures all polished stainless steel construction with a strongtension spring for years of trouble-free use and super cleanwiper action.

HR-70127 $20.00 kit

MIGHTY WIPER THREADED SHAFT ARM & BLADE K

Old school looks with modern function. 1940 original stchrome pivot head with polished stainless arm. Comes wour all-stainless modern-style 8" blade fitted with hiquality rubber for easy replacement and dependability.

MW-17526-K $35.00 kit

MW-17508-S

Straight shaft78-1748

$15.00 ea

MW-17508-T

Tapered shaft2"

"Threa

ds

1"

1"

4"

OriginalHookStyle

Uses

originalnut.


10/161010 (800) 221-367310 (800) 221-3673

PUSHONWe offer (3)style lengths.

See 4, 5, & 6

WIPER ARM SHAFT

Small clip needs

to be pushed in to

install and remove

wiper arm.

WIPER ARM NUT

CLIPONWe offer (3)

style lengths.See page 4

SCREWONWe offer (3)

style lengths.See page 4 & 5

WIPER MOTOR SHAFT

HOLE

CLIP

Specialt y Power WindowsWiper Systems

78-17481

$15.00 pair

32-36

37-40 41-4

8

1932-19408" length

1941-19489" length

78-17528-B 1932-40 8" length

21A-17528 1941-48 9" length


9"

8"

Our blades have polished stainless steelframes and attaching clips. The difference is in

the rubber. The originals had a stack of die cut hardrubber to form the V blade. Ours is extruded of a softer

rubber and incorporates a T guard to protect the windshieldglass against possible scratches from the stainless steel frame.

1932-48

Wiper BLades

Original

Hook Style Blade

Original Original

Original

Wiper Arm - Adapter BushingThese aluminum machined bushingsfit on the end of the tower shaftsand are attached with set screws.You must use push-on wiper arms. AK12 1941-48 "K58 Modern Arm "


"

A



I DONT GET IT, SAM. WHATSSO GREAT ABOUT BOB'S NEWWIPER ARMS & BLADES?

Look Dudley, The old fashioned hookend is gone. Its the samebeautiful arm but now ithas a snap-in modern end.

CLEAN SWEEP

Wow! Heres theblade. It lookspretty nifty.

The real treat is that the arm locks

the blade in place tokeep it rigid so the

rubber acts like asqueegee.

Right! Its a nohassle job. Theclip is plastic so

it doesnt hurt your

fingers.

This refill is cool.I can change itjust like on my newFord.

1. WIPER ARM- These are basically the same high quality,original style, polished stainless arms that we have been making formany years right here in the good ol U.S.A. We changed the end alittle to accept our new smooth action. blades.

3. WIPER ARM END BOSS- The raised boss locks tightly into thepivot head on the blade, allowing no side motion, making the arm andblade a solid unit for effective wiping action.

4. WIPER BLADE BODY - Super clean, lowprofile, all stainless construction. Rib design adds strengthand good looks. Some manufacturers use bridge typetensioners on their blades to conform to curved glasswhich adds height. All 1932-1948 Fords have flatwindshields so there is no need for those ugly bridges.

5. PIVOT HEAD- Polished stainless for goodlooks. Strong spring action locks securely onto arm.Will fit any of Bobs New Snap-In Style arms.

6. RIVET HEAD - We carefully install a Stainless Steeltubular rivet to insure the head is up and lookin good when thewipers are in the park position. We also do the same on the arm;creating a RH and LH assembly. Its just our extra attention to detail.

RUBBER REFILL- Quick change refill thatsnaps into place - no need for pliers and gloves.

These are easy on the fingers. You dont have toreplace the whole blade just the low-buck refill.

2 Sizes available.Both will fit new snap-in style blades.

$5.00 each

2. WIPER ARM MOTOR MOUNTING END- Theother end of our new arm still fits your original wiper toweror wiper motor shaft so in a jiffy you can switch from theRain Beater Snap-In Style" for go, to the Original Hook-InStyle for show.

7. WIPER RUBBER - Installed for you in the metal blade is aprecision formed rubber blade featuring a sharp wiping edge forgreater efficiency and long life.

78-17528-RF

1937-1940

8"

21A-17528-RF

1941-19489"

THe arM

THe MeTaL BLade

1937-1939 SHOWN

2 LENGTHS: 8" & 9"

THe rUBBer

See page 5

See page 5


12/161212 (800) 221-367312 (800) 221-3673

12VOLT, 2SPEED WITH SWITCH

Designed to easily replace the original,sluggish vacuum-drive units. Each kit featuresour super dependable, 2-speed electric wipermotor with switch, our custom engineeredmounting brackets and hardware. These easy-to-install kits use the original motor locationand attach to your original wiper linkage.Detailed installation instructions included.

Make wet weather driving safer and more enjoyable.

by

1940 All Body StylesHeavy duty 2-speed, automatic park.

01A-17508-E12

$200.00 kit

1940-48 Ford CarElectric Wiper Conversion Kits

Youll remove both, theoriginal wiper motor and itsmounting bracket from theinterior side of the firewall,beneath the dash panel.

Great for 32-39 Coupes & Sedans12VOLT WIPER SYSTEMS

This is the most adaptable universal system that we have everseen. The flex cable and transmissions work together like arack and pinion system. The motor itself is mounted remotely

under the dash or behind the kick panel or wherever space isavailable, giving you many options.

Mount wipers overhead like the original1932-1939 or put them in the cowl.

Great replacement in 1941-48 cars where the originalequipment is missing.

Adjustable sweep of 90 to 160. You set the park position: inboard, outboard, right side

or left side. Tell your buddy with the Chevy or Willys that these will

work for them too, fiberglass or steel cars. Comes with written instructions and a DVD

showing actual installation.

SPECIALTY WIPER SYSTEMSB-17508-A With 2-speed switch $285.00

B-17508-B With Delay switch $325.00

THIS SYSTEM USESTHE ABOVE BLADES & ARMS

12-VOLTMOTOR

CAMDRIVEARM

WIRING

DELAY SWITCH(Optional)

FLEX CABLE

(2) TUBESTO HOLD

FLEX CABLES

2-SPEEDSWITCH

(2)TRANSMISSIONS

MOUNTINGBOX

Specialty Wiper SystemsSpecialty Power Windows Wiper System



I want wiper towers like the 40 Passenger

1946-48 All Body StylesDesigned for use with original

radio and dash accessories.

51A-17508-E12

$200.00 kit

1941-42 All Body StylesHeavy duty 2-speed with

automatic park.Not designed for use with

original 1941 radio.

11A-17508-E12

$200.00 kit

01C-17508-K $375.00 kit

Complete instructions & templates included

A

J, K

B

C

D E

F

GH

I

G: (2) Wiper Blades 8-1/4"

H: (2) Wiper Arms (Pair)

I: (1) Pre-wired 2-Speed Switch

J: (7) 1/4"-20 x 3/4" Hex Bolts

K: (7) 1/4" Lock Washers

A: (1) 12V Motor & Bracket

B: (1) Spindle Platform Assembly & Hardware

C: (1) Dash to Firewall Mounting Bracket

D: (2) Wiper Towers with Pads, 2 Drive Arms

E: (4) Drive Arm Washers (2 black & 2 clear)

F: (1) Drive Arm Spring Clip (fastens drive arms)

COMPLETE KIT INCLUDES:

1940-47 Pickup

12VOLT, 2SPEED TANDEM WIPER KIT

Premium quality kit with specially engineered components made to adfactory style cowl-mount tandem wipers to these extremely popular truckSmooth function and beauty just like the cars came with. Our kit has bee

carefully designed with the right parts and hardware including complete, cleinstructions so you can easily install with great results.

PassengerCar

function&looks

foryourPickup!


14/161414 (800) 221-367314 (800) 221-3673

Wiper KnobsEach is exact shape and color. Note: 1932-36 knobs are chrome; 1937-48 are plastic. 1938-39 plastic Closed Carknobs are screw-on type with threads. 1937-1939 Convertible & Station Wagon, & 1940-1948 knobs are push-on.

B-17513 81A-17513-A78-17513-B 91A-17513-A81A-17513-B 01A-17513-A 01A-17513-B91A-17513-B

21A-17513-A 21A-17513-B 51A-17513-A 21C-1751351A-17513-B 51A-17513-C11A-17513 09A-17513

B-17513 1932-36 All & 1937 Coupe & Sedan Chrome screw-on

78-17513-B 1937 Deluxe Convertible & Station Wagon Yellow-Brown push-on

81A-17513-A 1938 All Closed Cars Ivory screw-on

81A-17513-B 1938 Convertible & Station Wagon Ivory push-on

91A-17513-A 1939 Coupe, Sedan & Sedan Delivery Light Yellow screw-on

91A-17513-B 1939 Convertible & Station Wagon Light Yel low push-on

01A-17513-A 1940 Standard All Bodies & 1940-1941 Pickup Sand push-on

01A-17513-B 1940 Deluxe All Bodies Maroon push-on

11A-17513 1941 Special, Deluxe & Super Deluxe, Coupe, Sedan, Convertible & Station Wagon Tan push-on

21A-17513-A 1942 Special Coupe & Sedan Maroon push-on

21A-17513-B 1942 Deluxe, Super Deluxe, Coupe, Sedan, Convertible, Station Wagon, Sedan Delivery Butterscotc h push-on

51A-17513-A 1946 Deluxe Coupe & Sedan Chocolate push-on51A-17513-B 1946 Super Deluxe Coupe, Sedan & Sedan Delivery Blue-Gray push-on

51A-17513-C1946 Super Deluxe, Convertible, Station Wagon, Sportsman, 1947-48 Deluxe, Super

Deluxe, Coupe, Sedan, Convertible, Station Wagon, Sedan Delivery & SportsmanGray-Tan push-on

09A-17513 1940 Coupe, Sedan & Convertible Dark Blue push-on

21C-17513 1942-47 Pickup & Commercial Black push-on

These are switch assemblies which mount in the center of the upper dash and go through a lot of wear and tear over the years.They are constructed to match the originals perfectly. Each switch is complete with sleeve, nut and wiper knob. Use specified partnumbers below when ordering. Note: 1937-39 are for Convertibles and Station Wagons only.

01C-17535

21C-17535

Pickup&Commercial

OriginalStyle

OriginalStyle

Wiper Controls with Knobs

78-17535 1937 Convertible & Station Wagon Yellow-Brown

81A-17535 1938 Convertible & Station Wagon Ivory

91A-17535 1939 Convertible & Station Wagon Light Yellow

01A-17535-A 1940 Standard, Coupe, Sedan & Station Wagon Sand

01A-17535-B 1940 Deluxe, Coupe, Sedan, Convertible, Station Wagon, Sedan Delivery Maroon

51A-17535-B 1946 Super Deluxe Coupe & Sedan Blue-Gray

51A-17535-C1946 Super Deluxe Convertible, Sportsman & Station Wagon,

1947-48 All Body StylesGray-Tan

01C-17535 1940-41 Pickup Sand

21C-17535 1942-47 Pickup Black

51A-17535-C51A-17535-B78-17535 01A-17535-A91A-1753581A-17535 01A-17535-B

Fordy Style Knob & Collar

Polished 01A-9270-SR

Black 01A-9270-SRB

$7.50 each

Mercury Style Knob & Collar

Polished 09A-9270-SR

Black 09A-9270-SRB

$7.50 each

2-Speed Wiper SwitchTurn-knob style, 4 push-on tabconnector terminals. 6 or 12 volt.

HR-60760-SW $15.00 each

YourChoice$45.00each

YourChoice$8.00each



1939-48

WIPER HOSE/FIREWALL GROMMETSUse the right grommets for your projects!

91A-17545 1939 $2.00 each

01A-17545-A 1940 Convertible $2.00 each

01A-17545-B 1940-48 Closed Car $2.00 each

21C-17265 1942-47 Pickup $4.00 each

1937-48

WIPER CLIP & SPRINGHolds wiper drive arms to motor.

78-17450 1937-40 All bodies

11A-17450 1941-48 All bodies

$5.00 each

1947-48 Coupe, Sedan & Convertible

WIPER SHAFT PIVOT NUTSpecial machined, chrome plated.

356094-S $6.00 each

1946-48

WIPER DRIVE ARM TO MOTOR GROMMETPrevents slop in wiper system. 2 required.

51A-17562 $5.00 each

1937-40

WIPER TOWER PADSPressure-molded black rubber fits between cowl & wiper towSeals out water and reduces noise from wiper system.

78-17556 1937-40 Convertible & Station Wagon

01A-17556 1940 Closed Car & 1941 Sedan Delivery

$10.00 pair

78-1755601A-17556

Wiper Components& Miscellaneous

Original Style 78-17537

01A-17537

78-17577Grommet

1937-40

WIPER CONTROL RODSRod connects wiper switch to vacuum motor. Dimensionacorrect for easy installation. Grommet included.

78-17537 1937-40 Convertible & Station Wagon $10.00 ea

01A-17537 1940 All Closed Cars (except wagon) $10.00 ea78-17577 1937-40 Wiper Control Grommet $1.00 ea

1932-48

WIPER MOTOR SHAFT TO ROOF GROMMETThis rubber grommet seals and prevents leakage where wipershaft extends through body.

40-17541 1932-34 Coupe & Sedan, rubber $3.00 each

48-17541 1935-36 Coupe & Sedan, rubber $3.00 each

11A-17541 1937-39 Coupe & Sedan, leather

1941-46 Couple & Sedan

1939-47 Pickup $3.00 pair

7C-17541 1947-48 Coupe & Sedan, leather

1948-52 Pickup $3.00 pair

40-17541SHOWN

1937-48WIPER MOTOR SHAFT BEZELS

Each is a perfect match to the originals.Excellent chrome-plating.

1937-39Coupe & Sedan

78-17515 $10.00 each

1947-48Coupe, Sedan &Convertible7C-17515 $15.00 each

1941-46Coupe & Sedan

11A-17515 $20.00 pair


16/16

Ford Cars 1932-48 Ford Pickups 1932-66

1819 N.W. Washington Blvd Grants Pass, Oregon 97526 Wiper Flyer 2013

(800) 221-3673Fax: (541) 474-0099 www.bobdrake.com

New Parts for old Fords &Hot Rods

WIP-13

CallOurFri

endlySales

StaffToday!

Our Wipers Fit SomeNon Fords Too!

HaveWipe

r

Questions

?

A Mini-Catalog of

Wiper Arms,Blades

& Related Products

A bit of memorabilia from Bobs collection

wipers minicat

Documents