windham weaponry catalog 2013

CATALOG 2013CATALOG 2013V.2V.2

www.windhamweaponry.comwww.windhamweaponry.com

“Building Decades of Experience into America’s Rifle”“Building Decades of Experience into America’s Rifle”

Made In

The U.S.A.

TABLE OF CONTENTSTABLE OF CONTENTS

Downrange...CarbonFiber

The Windham Weaponry Story

Windham Weaponry’s Warranty

Why A Windham Weaponry Rifle?

The CDI Rifle

The MPC Rifle

The SRC Rifle

The HBC Rifle

The VEX & Snow Camo VEX Rifles

The Carbon Fiber SRC

Law Enforcement Models

Barreled Upper Receiver Assemblies/Parts

A Visual Guide to the WW-15 Rifle

Barrel Kits / Barrels / Barrel Parts

Lower Receiver Parts & Parts Kits

Magazines & Magazine Accessories

Buttstocks, Buttstock Parts & Accessories

Pistol Grips, Forends & Accessories

Sights & Optics / Sight Parts

Gunsmithing Supplies & Accessories

Windham Weaponry Apparel & Accessories

Ordering Instructions, Returns, Shipping, Gunsmithing, Gift Certificates, Order Form

13456789

10111216182023242628303132

Windham Weaponry’s Carbon Fiber SRC will be at your FFL dealer soon. With durable and lightweight receivers molded of Carbon Fiber composite and unique “billet” styling, it features our highly accurate M4 barrel, six position telestock, Picatinny rails on the gas block and receiver that are ready to mount the sights of your choice, and a quality 30 round magazine. For more details, see Page 10.

Model: R16M4FTT-CF1Caliber: 223. Rem./5.56mm NATO

16” M4 Chrome Lined Barrel

Welcome to the second issue of the Windham Weaponry Catalog in 2013. Our “collage” Cover reflects just some of purposes that fine Windham Weaponry rifles are being used for by the shooting public.

Opponents of “America’s Rifle” say they are not used for hunting, but a look at the happy face of 10 year old Dawson Black will convince you otherwise. Dawson bagged his first deer with a WW SRC after learning to shoot with his dad at their local Fish & Game Club.

Below Dawson is one of our Law Enforcement friends, and we’ve made many - in Police and Sherrif’s Departments around the country. When they have the opportunity to try our LE models, the quality, accuracy, reliability and warranty prove that “we’ve got your back” - to quote our advertising!

Morgan Rogers - shown lower left with our Snow Camo VEX-SS - is an Air Force Veteran and avid shooter. You can see her (often as co-host) on Jeff Zimba’s YouTube Channel called “Bigshooterist”, and on Facebook.com/ GunTestVids. We thank Jeff for that photo, and Morgan for making the VEX look great in the woods of a Maine Winter!

Our friend Steve Markwith, shown above Morgan, spent some quality range time sighting in one of our CDI’s - with very accurate results and the satisfaction of shooting a fine firearm.

Finally, we show another young shooter who also has been learning his skills from his Dad - Harley. With that target as evidence, 11 year old Eli Ryan is obviously well schooled - he has a sharp eye and an accurate WW SRC! Eli did the research, saved his money, and with Dad’s help selected Windham Weaponry as his AR of choice. We hear he’s used his SRC to bring down some awesome feral hogs as well!

As always, we encourage you to take firearms safety seriously, to enjoy the great outdoors, and to communicate with us any time you like. We’d love to see photos of how you use your Windam Weaponry rifle! Visit us on Facebook, or go to

WWW.WINDHAMWEAPONRY.COMBest wishes and thanks from the WINDHAM WEAPONRY TEAM

1“The Quality Goes In Before The Rifle Goes Out”

The Windham Weaponry Story... A team of the finest firearms manufactur-ers in the U.S.A. has been re-assembled to bring to market the highest quality AR type rifle possible. These good Maine folks - most of whom are former employees of Bushmaster Firearms - offer many years of experience in the industry, and all look forward to working with you, to serving your needs, and to building you a great rifle.

When the people who bought Bushmaster in 2006 decided to move it “lock, stock and barrel” out of Maine to New York in 2011, the original Bushmaster owner, Mr. Richard Dyke was left with both a dilemma and an opportunity. Almost to the day of the 2011 move, Mr. Dyke’s non-compete clause expired. He still owned the property where Bushmaster had been built, and knew all the workers - now laid off - who had helped him build it. He made a decision to “get back in the game” and promptly put an email out to many of his former employees and friends asking if there was interest in joining him for a new project. With a resounding “yes” of support, he gathered the financing in two days, and started bringing people back into their long-time Windham manufactur-ing home. Phoenix-like, Windham Weaponry was on the rise.

Within three months, the first productions models of the new Windham Weaponry line had been perfected and delivered. Quality, fit, finish, durability, accuracy and value were all superb - giving creedence to Windham Weaponry’s motto “The Quality Goes In, Before The Rifle Goes Out”. The firearms industry and consumers welcomed this new effort warmly, old friends and contacts were re-established, and sales grew. In less than a year and a half, Windham Weaponry had brought back almost 70 employees, benchmarked impressive sales numbers, and established their name as one of the pre-eminent firearms manufacturers in the country. The press heralded it as “truly an American success story”, and all due to the vision of its founder.

Further growth for Windham Weaponry has already been planned and implemented. A “Carbon Fiber Division” has been established in Phoenix through a partnership with Patriot Ordnance Factory, and JC Machine and Motorsports LLC. The three companies have jointly occupied a new 12,000 square foot production facility in Phoenix which will produce rifles and firearms parts, and serve as a design and development center for new firearms products. Watch www.windhamweaponry.com for further developments as the Windham Weaponry story continues to unfold. Some of the members of the Windham Weaponry team are introduced below.

Richard DykeWindham Weaponry Chairman and Principal Owner

Allen FaradayWindham Weaponry Executive Vice President of Operations

“I was Chairman of Bushmaster, and Principal Owner from 1976 to 2006. I’m very pleased to have brought this fine group back together, and I’m delighted at the progress and products we’ve made in such a short time.”

“I worked for the original Bushmaster for 14 years. I’m excited to be back in the business with a great new company and a great team!”

Jeff DykeWindham Weaponry Treasurer

Yung EdwardsWindham Weaponry Carbon Fiber Division Manager

“I have worked for, and been involved with the original Bushmaster company for over 25 years, and I’m looking forward to helping build Windham Weaponry into another great company that we can all be proud of.”

“I was a Manager for the old Bushmaster Carbon 15 Division for 5 years. It’s exciting to be a part of such a dynamic new company.”

Kim BurnhamWindham Weaponry Chief Financial Officer

Mark EliasonWindham Weaponry Vice President of Sales & Marketing

“I’m delighted to be able to bring my 8 years of experience in the firearms industry to Windham Weaponry, I‘m anxious to acquire and renew relationships with our future customers, vendors and employees.”

Warren DykeWindham Weaponry Vice President of Production Planning“I’m excited to be involved with a company where the atmosphere is contagious from such engaged people, who are so dedicated to quality and customer satisfaction. That’s what makes Windham Weaponry a great company!”

“I’m excited to be starting this new adventure called Windham Weaponry with my friends and former co-workers. We’ll make and sell rifles that you can all be proud to own.”

Cheryl EliasonWindham Weaponry Customer Service Manager“I worked for Bushmaster Firearms in Customer Service for 12 years. I am looking forward to be working with great people to offer you the best products and customer service with this exciting new company. “

Dale LautenWindham Weaponry Invoicing Manager

“I previously worked for Bushmaster for 21 years. I am so thrilled to be back in the gun business and looking forward to establishing ourselves as THE BEST IN THE BUSINESS!”

Todd CoonsWindham Weaponry Law Enforcement Sales Manager“After a career with the City of Portland Police Dept., I welcome the opportunity to bring my experience to help Windham Weaponry meet the needs of Law Enforcement Departments and Officers all around the country.”

Windham Weaponry, Inc.Windham Business Park • 999 Roosevelt TrailP.O. Box 1900 • Windham, ME 04062Office: 1-207-893-2223 • Fax: 1-207-893-1623Toll Free: 1-855-808-1888 • www.windhamweaponry.com

At right, the Windham Weaponry Business Park in the beautiful Sebago Lakes Region of Southern Maine, home of the finest AR15 rifle makers in America.

2

“I bring my 10 years of Military service and weapons repair skills to a wonderful company - making what I believe are the best AR rifles on the market. I worked for Bushmaster for 3 years and look forward to many more years of making great rifles for Windham Weaponry.”

Windham Business Park • 999 Roosevelt Trail • P.O. Box 1900 • Windham, ME 04062Office: 207-893-2223 • Fax: 207-893-1623 • Sales Line: 855-808-1888 • www.windhamweaponry.com

Erik WinterWindham Weaponry Gunsmith

Leon DouglasWindham Weaponry Receiving Manager

“I worked for Bushmaster Firearms for 9 years, and I’m very excited to be involved with this new company as a member of this great Windham Weaponry team.”

“I worked for Bushmaster Firearms for 13 years as part of the production team and gunsmithing department. I am looking forward to helping provide excellent quality and customer service with this great new company and dedicated Windham Weaponry team!”

Bill BuchananWindham Weaponry Production Team

Ted LautenWindham Weaponry Logistics Team

“I previously worked for Bushmaster for 17 years. I am pleased to be working with my gun family again, and striving to provide the best products possible.”

“I worked for Bushmaster for 12 years. I'm really enthused about the new company and about making another superior product with a knowledgeable group of professional employees.”

Jackie EliasonWindham Weaponry Invoicing Department

Glenn EdwardsWindham Weaponry Maintenance Manager

“As a member of the Bushmaster family for 12 years, it was hard to see it leave. But now I have the great honor to be a part of a whole new company in the gun industry.”

“After 17 years with Bushmaster I was sorry to see it end. Now with the start of Windham Weaponry I am very happy to be reunited with old friends, and looking forward to exciting growth here.”

Nicole CaronWindham Weaponry Accounting Department

“This is a dream come true to work with such a great team. I previously worked for Bushmaster Firearms for 10 years. I am very excited to be part of this new adventure with Windham Weaponry.”

Karen MooreWindham Weaponry Shipping Department

Emil BraleyWindham Weaponry Production Team

“I worked for Bushmaster for 8 years in production & assembly. I’m proud to work for Windham Weaponry whose priority is the highest quality and dependability in the gun industry.”

“Hi, I worked for the Bushmaster Team for 11 years. I am so thrilled to be a part of the new Windham Weaponry Team that has been my family for so long. We will be the Best of the Best in performance, quality and customer service.”

Percy DieppaWindham Weaponry Information Technology Manager

Karen FogartyWindham Weaponry Assistant to the V.P. of Sales & Marketing“I worked for Bushmaster for 6 years, first as Executive Administrator and then managing HR. I am proud to be a part of this team of extraordinary people providing exceptional products and outstanding customer service.”

“I worked for Bushmaster 12 years. I'm elated to have the opportunity to be part of this great team. I'm extremely proud of everyone's dedication and attention to detail. That is what makes this company a great company!”

Joel SanbornWindham Weaponry Production Team

“I worked for Bushmaster for 12 years until the company closed. I'm thankful to Mr. Dyke and family for this opportunity to bring my production experience to this new company, and to once again to be associated with this great group that I've known for a very long time.”

“I'm happy to once again be a part of a group of talented people that have nearly 400 combined years of experience in the firearms business.”

Roger CoteWindham Weaponry Quality Control Team

Tammy HadleyWindham Weaponry Quality & Outsourcing Manager

Sherrie NickersonWindham Weaponry Purchasing Manager

“I worked for Bushmaster for 13 years in Purchasing, and I look forward to a bright future with this great Windham Weaponry team in our new company.”

“I worked for Bushmaster for 12 years in Quality Control, and then as Outsourcing & Transportation Manager. I'm very excited to bring my knowledge to this new, Maine based company with such wonderful ownership.”

“The Quality Goes In Before The Rifle Goes Out”

Mary GalipeauWindham Weaponry Compliance Specialist“I was previously with Bushmaster Firearms for 10 years as their Compliance Specialist. I am delighted to be part of the exciting new challenge ahead, and to working with this very experienced and professional Windham Weaponry team!”

Matt HastyWindham Weaponry Retail Sales Manager“I worked for Bushmaster for 12 years in Inventory Control, Customer Service, Sales and Project Management. I am very excited to be a part of Windham Weaponry and to have the opportunity to work with a great group of people.”

Doug PriceWindham Weaponry Production Manager

“I worked for Bushmaster for 17 years, first as an assembler, then 11 years as Production Manager. I'm excited and honored to be a part of Windham Weaponry and with great fellow employees.“

Though the Windham Weaponry team continues to grow, we wanted to offer this glimpse of some of the dedicated people of our team. They all help to make this the

great organization it is. We introduce you to these fine

Maine folks so you’ll be able to put a face on the quality of your rifle. When you call Windham Weaponry, you won’t get a menu or a recording - at least during regular business hours. We look forward to hearing from you.

Ron RobertsWindham Weaponry Customer Service

3

Backing up our commitment to producing the finest rifles possible, every Windham Weaponry rifle includes our Transferable Lifetime Warranty - the best in the business!

Windham Weaponry – Protecting Your Firearm Investment

Windham Weaponry • 999 Roosevelt Trail • P.O. Box 1900 • Windham, ME 04062Telephone: 207 893 2223 • Fax: 207 893 1623 • Sales Line: 855 808 1888E-mail: [email protected] www.windhamweaponry.com

Windham Weaponry, Inc. (WWI) will warranty all firearms manufactured by WWI against any and all manufacturer’s defects in material and workmanship which affect reasonable operation for the lifetime of the firearm to the purchaser. This warranty is transferable from the original purchaser to a subsequent buyer.

Warranty is established by registering online at:

http://www.windhamweaponry.com or by phone with our Customer Service Department at 855-808-1888.

Warranty claims may be made by contacting Customer Service, either in writing or by phone for a Return Authorization number prior to delivering the unloaded firearm to Windham Weaponry, Inc., 999 Roosevelt Trail, Windham, Maine 04062, freight prepaid by the purchaser. Firearms and ammunition must be shipped separately. No COD shipments will be accepted.

WWI will repair or replace only those parts determined to be defective by the factory. This warranty does not apply to normal wear and tear of any parts or protective finishes.

The following are specifically excluded from coverage under this warranty and will cause said warranty to become null and void:

Damage or malfunction resulting from accident, negligence, misuse or unauthorized repair or alteration; barrel obstruction; use of ammunition other than NATO and/or SAAMI specification new production ammunition; use of any hand loaded, reloaded, imported or factory re-manufactured ammunition; failure to provide reasonable and necessary maintenance as described in the Operator’s Manual accompanying the firearm; rust or corrosion; use of replacement parts other than parts authorized by WWI for use in WWI firearms; any unauthorized repair or any alteration, including of a cosmetic nature, performed on the firearm by an individual, organization, company or entity other than WWI; unreasonable or excessive use of the firearm.

Any finished products that are not assembled at our facilities, or are assembled using imported or used parts. This includes complete rifle kits, upper receivers, lower receivers, barrel assemblies, etc.

No implied warranties of any kind are made herein. Limited Lifetime Warranty does not apply to any accessory items.

WWI assumes no liability for accidental or consequential damages. Some states do not allow the exclusion or limitation of accidental or consequential damages and therefore this limitation may not apply to you.

TRANSFERABLE LIMITED LIFETIME WARRANTY

The Windham Weaponry Limited Lifetime Warranty can be easily activated online (www.windhamweaponry.com), or by calling Toll-Free: 1-855-808-1888

By following the simple instructions on the Website Warranty Page, your Windham Weaponry Firearm’s Warranty will be in effect imediately upon completion. The Windham Weaponry Team is dedicated to ensuring your satisfaction with their fine products, and hope you enjoy them safely for many years. If you need parts, service or advice concerning your rifle, we are never more than a phone call away, and will be pleased to help you.

Windham Weaponry • 999 Roosevelt Trail • P.O. Box 1900 • Windham, ME 04062Telephone: 207 893 2223 • Fax: 207 893 1623 • Sales Line: 855 808 1888

E-mail: [email protected] www.windhamweaponry.com

4

Made In

The U.S.A.

“The Quality Goes In Before The Rifle Goes Out”

© 2013, Windham Weaponry, Inc.

★ LIFETIME WARRANTY - transferable to any future owner.

★ AN EXPERIENCED TEAM - dedicated to quality Customer Service – we service what we sell! Superior AR Weapons Systems built in the State of Maine by experienced people who care.

★ BARRELS - of 4150 Chrome Moly Vanadium 11595E Steel with Chrome Lining in Bore and Chamber for long wear and ease of cleaning. Standard barrels are chambered for 5.56 NATO ammo, and are safe for both .223 and 5.56 NATO. Air Gauging is a standard step to help ensure accuracy. Final finish is military grade Black Manganese Phosphate for protection against rust and corrosion. On Varmint models, barrels are Precision 416R Stainless Steel, Fluted, with a Matte Finish. That barrel features a Compass Lake Specification Firing Chamber with Matched Bolt.

★ HANDGUARDS - we use the superior M4 Double Heat Shielded Handguards on most models. Varmint rifles are fitted with custom aluminum free-float forends.

★ ALL PARTS MADE IN THE USA - and “Q-C’d” in the factory by experienced professionals.

★ BARREL EXTENSIONS - on all WW models are machined with the reliable M4 Feed Ramps for consistent cartridge feeding.

★ BOLTS - machined from Carpenter 158 Steel for strength and durability.

★ BOLT CARRIERS - Chrome Lined inside for durability, and machined from highest quality steel. Chrome Lined Gas Keys are staked on by our professional Gunsmiths.

★ TRIGGERS - are precision machined before being finished in Black Manganese Phosphate - then ground with a sharp release lip for smooth take up and a crisp release.

★ TRIGGER GUARD - A premium Aluminum Trigger Guard - much stronger than plastic varieties - is standard on our rifles.

★ RECEIVERS - CNC machined from Forged 7075 T6 Aircraft Aluminum - bead blasted to a non-reflective matte surface before final finishing in Hardcoat Black Anodize.

★ SAFETY SELECTOR INDICATOR MARKINGS are stamped on both sides of the Lower Receiver for added safety.

Why a Windham Weaponry rifleWhy a Windham Weaponry rifle is your best firearms value... is your best firearms value...

55

California Compliant CDI Model

CDI ModelCDI Model

R16M4SFSDHT.223 Rem. / 5.56mm NATORifleSemi-Automatic, Gas Impingement System30 + 1- Ships with one 30 Rd. Magazine (accepts all std. sizes)Manual Lever with Indicator Markings on Both Sides of ReceiverM4A4 Type Flat Top Upper ReceiverForged 7075 T6 Aircraft Aluminum Hardcoat Black Anodize FinishCarpenter 158 Steel16” M4 Profile, Chrome Lined with Vortex Flash Suppressor4150 Chrome Moly Vanadium 11595E SteelMachined with M4 Feed Ramps1 Turn in 9” - Right Hand TwistMagpul MOE 6-Position Telescoping ButtstockDiamondhead Free-float ForendMagpul AFG Angled ForegripMagpul MOE PistolgripMachined Aluminum Trigger Guard Diamondhead Dual Aperture Flip-up Diamondhead Front Flip-up SightFoam Lined, Hard Plastic Gun CaseBlack Web Sling & 32 Page Full Color Operators Manual7.025 Lbs. (without Magazine)36.125” (32.375” with Telestock collapsed)Windham Weaponry Transferable Lifetime$1680.00

Model:Caliber:

Type:Action:

CapacitySafety:

Receiver:Receiver Material:

Receiver Finish:Bolt Material:

Barrel:Barrel Material:

Barrel Extension:Rifling:Stock:

Forend:Foregrip:

Pistol Grip:Trigger Guard:

Rear Sight:Front Sight:Packaging:Including:

Weight:Length Overall:

Warranty:M.S.R.P.:

The Windham Weaponry CDI was developed as a result of numerous customer requests for a rifle that includes many of our most popular accessories. Think of it as the firearms equivalent of a Shelby Mustang - already factory equipped for maximum performance!

A “Compliant” model of the Windham Weaponry CDI is available for legal sale in the State of California. It includes a 10 Round Magazine and unique”Bullet Button” Magazine Release that requires a tool for Magazine removal.

R16M4SFSDHT-CA$1712.0010 + 1

Model:M.S.R.P.:

Capacity:

Made In

The U.S.A.

NOTE: FFL required for purchase of complete rifles.

6

Compliant MPC Modelsfor States of CA • NY • NJ • MA • CT • MD

MPC ModelMPC Model

R16M4A4T.223 Rem. / 5.56mm NATORifleSemi-Automatic, Gas Impingement System30 + 1- Ships with one 30 Rd. Magazine (accepts all std. sizes)Manual Lever with Indicator Markings on Both Sides of ReceiverM4A4 Type Flat Top Upper Receiver with Detachable Carry HandleForged 7075 T6 Aircraft Aluminum Hardcoat Black Anodize FinishCarpenter 158 Steel16” M4 Profile, Chrome Lined with A2 Flash Suppressor4150 Chrome Moly Vanadium 11595E SteelMachined with M4 Feed Ramps1 Turn in 9” - Right Hand Twist6-Position Telescoping Buttstock with Windham Weaponry LogoM4 Double Heat Shield HandguardsA2 Black Plastic PistolgripMachined Aluminum Trigger Guard A4 Dual Aperture Elevation & Windage Adjustable: 300 - 600 M Adjustable Height Square Post in A2 Standard BaseFoam Lined, Hard Plastic Gun CaseBlack Web Sling & 32 Page Full Color Operators Manual6.85 Lbs. (without Magazine)36.125” (32.375” with Telestock collapsed)Windham Weaponry Transferable Lifetime$1086.00

Model:Caliber:

Type:Action:

CapacitySafety:





Forend:Pistol Grip:

Trigger Guard:Rear Sight:

Front Sight:

Packaging:Including:


Warranty:M.S.R.P.:

The Windham Weaponry MPC has - from day one - been our “most popular carbine”.

Accuracy, durability, fit, finish, value, this carbine has it all, and with our Lifetime Transferable Warranty, you know it will retain its value for years to come.

“Compliant” Windham Weaponry MPC models are available for legal sale in those States. The CA Model includes a 10 Round Magazine with a ”Bullet Button” Magazine Release that requires a tool for magazine removal, and a standard telestock.

The NY-NJ-MA-CT Model has a fixed length Telestyle Stock, 10 Round Magazine and compliant welded muzzle brake.

Maryland’s only restriction limits magazine capacity to 20 rounds.

R16M4A4T-CA$1111.00R16M4A4PT-NY

CA Model:M.S.R.P. for both:

NY-NJ-MA-CT Model:

Made In

The U.S.A.

NY-NJ-MA-CTModel shown


7

Compliant SRC Modelsfor States of CA • NY • NJ • MA • CT • MD

SRC ModelSRC Model

R16M4FTT.223 Rem. / 5.56mm NATORifleSemi-Automatic, Gas Impingement System30 + 1- Ships with one 30 Rd. Magazine (accepts all std. sizes)Manual Lever with Indicator Markings on Both Sides of ReceiverM4A4 Type Flat Top Upper Receiver with Picatinny RailForged 7075 T6 Aircraft Aluminum Hardcoat Black Anodize FinishCarpenter 158 Steel16” M4 Profile, Chrome Lined with A2 Flash Suppressor4150 Chrome Moly Vanadium 11595E SteelMachined with M4 Feed Ramps1 Turn in 9” - Right Hand Twist6-Position Telescoping Buttstock with Windham Weaponry LogoM4 Double Heat Shield HandguardsA2 Black Plastic PistolgripMachined Aluminum Trigger Guard None - ready for accessory sights/opticsNone - Picatinny Rail Gas Block ready for accessory sightsFoam Lined, Hard Plastic Gun CaseBlack Web Sling & 32 Page Full Color Operators Manual6.30 Lbs. (without Magazine)36.125” (32.375” with Telestock collapsed)Windham Weaponry Transferable Lifetime$1040.00

Model:Caliber:

Type:Action:

CapacitySafety:





Forend:Pistol Grip:


Front Sight:


Weight:

Length Overall:Warranty:

M.S.R.P.:

The Windham Weaponry SRC “sight ready carbine” was created for those AR shooters who

intend to add their own aftermarket sights, scopes or optics, and want a rifle that offers the option of not purchasing factory sights. The SRC offers all the Windham Weaponry quality with the flexibility of front and rear same plane Picatinny Rails.

R16M4FTT-CA$1055.00R16M4FTPT-NY

CA Model:M.S.R.P. for both:

NY-NJ-MA-CT Model:

Made In

The U.S.A.

“Compliant” Windham Weaponry MPC models are available for legal sale in those States. The CA Model includes a 10 Round Magazine with a ”Bullet Button” Magazine Release that requires a tool for magazine removal, and a standard telestock.

The NY-NJ-MA-CT Model has a fixed length Telestyle Stock, 10 Round Magazine and compliant welded muzzle brake.

Maryland’s only restriction limits magazine capacity to 20 rounds.


8

Heavy Barrel Profile & M4 Barrel Profile Comparison...

HBC ModelHBC Model

R16A4T.223 Rem. / 5.56mm NATORifleSemi-Automatic, Gas Impingement System30 + 1- Ships with one 30 Rd. Magazine (accepts all std. sizes)Manual Lever with Indicator Markings on Both Sides of ReceiverM4A4 Type Flat Top Upper Receiver with Detachable Carry HandleForged 7075 T6 Aircraft Aluminum Hardcoat Black Anodize FinishCarpenter 158 Steel16” Heavy Profile, Chrome Lined with A2 Flash Suppressor4150 Chrome Moly Vanadium 11595E SteelMachined with M4 Feed Ramps1 Turn in 9” - Right Hand Twist6-Position Telescoping Buttstock with Windham Weaponry LogoM4 Double Heat Shield HandguardsA2 Black Plastic PistolgripMachined Aluminum Trigger Guard A4 Dual Aperture Elevation & Windage Adjustable: 300 - 600 M Adjustable Height Square Post in A2 Standard BaseFoam Lined, Hard Plastic Gun CaseBlack Web Sling & 32 Page Full Color Operators Manual7.45 Lbs. (without Magazine)36.125” (32.375” with Telestock collapsed)Windham Weaponry Transferable Lifetime$1096.00

Model:Caliber:

Type:Action:

CapacitySafety:





Forend:Pistol Grip:


Front Sight:



Warranty:M.S.R.P.:

The Windham Weaponry HBC model, our “heavy barreled carbine”, is a close cousin to the

MPC model except for its barrel - see the barrel comparison below. Some shooters feel the heavy profile provides more rigidity and accuracy, but either way its all 100% Windham Weaponry quality.

The Heavy Barrel profile features more thickness under the handguard area, and a straight machine turning from the sight base forward to the slight step before the muzzle threading.

The M4 Barrel profile is turned thinner and lighter under the handguards. The .610” step cut forward of the sight base is designed for mounting an M4 Grenade Launcher.

Made In

The U.S.A.

Heavy Profile.980” .950” .850” .745” .700”

.750”

.980” .640” .845” .720” .745”.610” .700”.750”

M4 Profile - 9.6 oz. lighter


9

For Winter Hunting... The Snow Camo VEX-SS

CA Compliant VEX-SS Model

VEX-SS ModelVEX-SS Model

R20FSSFTSKV.223 RemingtonRifleSemi-Automatic, Gas Impingement System5 + 1- Ships with one 5 Round Magazine (accepts all std. sizes)Manual Lever with Indicator Markings on Both Sides of ReceiverM4A4 Type Flat Top Upper Receiver with Optics Riser BlocksForged 7075 T6 Aircraft Aluminum Hardcoat Black Anodize FinishCarpenter 158 Steel20” Stainless Steel - Fluted - Matte FinishPrecision 416R Stainless SteelCompass Lake Specification with Matched Bolt1 Turn in 8” for heavier varmint bullets - Right Hand TwistSkeleton Stock with Sling SwivelKnurled, Vented Aluminum Free-Floating Forend with Sling SwivelHogue Rubber Pistol GripMachined Aluminum Trigger Guard None - ready for sights or optics on Picatinny Rail platformNone - Picatinny Rail Gas Block ready for accessory sightsFoam Lined, Hard Plastic Gun CaseBlack Web Sling & 32 Page Full Color Operators Manual8.20 Lbs. (without Magazine)38.5”Windham Weaponry Transferable Lifetime$1295.00

Model:Caliber:

Type:Action:

CapacitySafety:




Chamber:Rifling:Stock:

Forend:Pistol Grip:


Front Sight:Packaging:Including:


Warranty:M.S.R.P.:

The Windham Weaponry VEX-SS is our “varmint exterminator”, and was designed with the varmint

hunter in mind. Its highly accurate 20” stainless steel barrel is matte finished to cut reflection and fluted to reduce weight. Aftermarket sights, scopes or optics can be mounted - scope riser blocks are included to provide a comfort-able cheek weld on the skeleton stock. A knurled and vented forend with bipod stud and sling swivel free floats the barrel for optimum accuracy.

Windham Weaponry offers a VEX-SS model compliant with regulations there. The CA Model includes a 5 Round Magazine with a ”Bullet Button” Magazine Release which requires a tool for magazine removal. Other than that, specs are same as the VEX-SS described above.

The Snow Camo VEX-SS is almost completely covered in our unique winter camoflage pattern - perfect for winter varmint hunting.

R20FSSFTS-C1$1470.00

Model:M.S.R.P.:

R20FSSFTSKV-CA$1320.00

CA Model:M.S.R.P.:

Made In

The U.S.A.


10

Carbon Fiber Molded Technologyfor the next generation of AR15 rifles...

CARBON FIBER ModelsCARBON FIBER Models

R16M4FTT-CF1.223 Rem. / 5.56mm NATORifleSemi-Automatic, Gas Impingement System30 + 1 - Ships with one 30 Rd. Magazine (accepts all std. sizes)Manual Lever with Indicator Markings on Both Sides of ReceiverM4A4 Type Flat Top Upper Receiver with molded Picatinny RailMolded Carbon Fiber Composite Carbon Fiber Matte Black - as moldedCarpenter 158 Steel16” M4 Profile, Chrome Lined with A2 Flash Suppressor4150 Chrome Moly Vanadium 11595E SteelMachined with M4 Feed Ramps1 Turn in 9” - Right Hand Twist6-Position Telescoping Buttstock with Windham Weaponry LogoM4 Double Heat Shield HandguardsA2 Black Plastic PistolgripIntegral Molded Carbon Fiber None - ready for accessory sights or opticsNone - Picatinny Rail Gas Block ready for accessory sightsFoam Lined, Hard Plastic Gun CaseBlack Web Sling & 32 Page Full Color Operators Manual5.85 Lbs. (without Magazine)36.125” (32.375” with Telestock collapsed)Windham Weaponry Transferable Lifetime$958.00

Model:Caliber:

Type:Action:

CapacitySafety:





Forend:Pistol Grip:


Front Sight:



Warranty:M.S.R.P.:

Made In

The U.S.A.

The Windham Weaponry Carbon Fiber SRC was born out of the latest carbon fiber composite molding

technology to bring you an AR type rifle of incredibly light weight - without sacrificing any Windham Weaponry quality, durability, accuracy or value. All the same high quality components of our standard models are married with carbon fiber molded receivers, and with our Lifetime Transferable Warranty, you can be guaranteed we will stand behind its quality for a lifetime.

Windham Weaponry’s carbon fiber composite molded receivers bring much more than light weight to the range! Carbon fiber receivers will dissipate heat faster than aluminum, have no surface finish to wear off, and the carbon fiber composite has an inherent lubricity that enhances long wear. Windham Weaponry’s receiver molds were created at a

state of the art design facility to yield a superior fit and function while utilizing many standard AR parts.

Our Carbon Fiber Receivers retain all the recognizeable features of the AR platform, but are molded with a unique

“billet machined” appearance – think Darth Vader meets the AR world!

The Carbon Fiber SRC is available at your FFL dealer now, with other models being developed to follow.


11

LAW ENFORCEMENT MODELSLAW ENFORCEMENT MODELSWE’VE GOT YOUR BACK.

When you need the right tool for the job,

• .223 Rem. / 5.56mm NATO Caliber • 16” M4 Barrel of 4150 Chrome Moly Vanadium 11595E Steel w. M4 Feed Ramps, Chrome Lined, Rifled 1 x 9“ RH • Semi-Automatic, Gas Impingement System• Ships with one 30 Rd. Magazine (accepts all sizes)• M4A4 Type Flat Top Upper Receiver with Diamond-head Dual Aperture Flip-Up Sight • Diamondhead Front Flip-Up Sight on Picatinny Rail Gas Block • Carpenter 158 Steel Bolt • 6-Position Telescoping Buttstock with single point QD Sling Adapter • A2 Black Plastic PistolGrip • Diamondhead 2-Piece Aluminum Handguard w. Quad Rails • Weight w/out Magazine: 6.55 lbs. • Length: 36.125” (32.375” - stock collapsed)

• .223 Rem. / 5.56mm NATO Caliber• 11.5” Barrel of 4150 Chrome Moly Vanadium 11595E Steel w. M4 Feed Ramps, Chrome Lined, Rifled 1 x 9“ RH w. Vortex Flash Hider • Semi-Automatic, Gas Impingement System • Ships with one 30 Rd. Magazine (accepts all sizes) • M4A4 Type Flat Top Upper Receiver with Diamondhead Dual Aperture Flip-Up Sight • Diamondhead Front Flip-Up Sight on Picatinny Rail Gas Block • Carpenter 158 Steel Bolt • 6-Position Telescoping Buttstock with single point QD Sling Adapter• A2 Black Plastic PistolGrip • Diamondhead 2-Piece Aluminum Handguard w. Quad Rails & Mission First Tactical Vertical Grip • Weight w/out Magazine: 7.0 lbs. • Length: 32” (28.25” - stock collapsed)

• .223 Rem. / 5.56mm NATO Caliber• 11.5” Barrel of 4150 Chrome Moly Vanadium 11595E Steel w. M4 Feed Ramps, Chrome Lined, Rifled 1 x 9“ RH • Semi-Automatic, Gas Impingement System • Ships with one 30 Rd. Magazine (accepts all sizes) • M4A4 Type Flat Top Upper Receiver with A4 Removable Carry Handle • A2 Front Sight • Carpenter 158 Steel Bolt • 6-Position Telescoping Buttstock • A2 Black Plastic PistolGrip • M4 Fiberglass Double Heat Shield Hand Guards • Weight w/out Magazine: 6.65 lbs. • Length: 32” (28.25” - stock collapsed)

Windham Weaponry brings its superb quality, accuracy and durability to this line of fine Law Enforcement models. Beyond our standard models shown here, we encour-age officers, agents and departments to contact our Law Enforcement Sales Manager so that we can create exactly the configuration that will meet your specific needs. As always, Windham Weaponry is proud to offer a Lifetime Transferable Warranty on all its rifles. See www.windhamweaponry.com for complete details.

For additional models, complete details and pricing, contact: Law Enforcement SalesLE Sales Line: 1-855-808-1888 • E-mail: [email protected]

Model: R11FTT-SBO1QDS

Model: R11A4T Also available with 14.5” Bbl.

Made In

The U.S.A.

Model: R16M4FTT-SB02


12

Barreled Upper Receiver AssembliesBarreled Upper Receiver Assemblies

This 16” M4 Profile Barreled Upper Assembly from our popular “MPC” carbine, is complete and ready to snap onto your Lower Receiver. The highly accurate 16” M4 barrel is machined from 4150 Chrome Moly Vanadium 11595E steel - rifled 1 x 9” Right Hand Twist, and chrome lined for long wear and easy cleaning. An A2 Flash Suppressor and standard A2 Front Sight are fitted, and the machined aluminum flat top Upper Receiver is complete with Bolt, Bolt Carrier Assembly, Charging Handle, Forward Assist, Ejection Port Cover, and Removable A4 Carry Handle with 300 - 600 meter Dual Aperture Rear Sight.

Windham Weaponry Barreled Upper Receiver Assemblies are sold in a variety of configurations to allow the shooter or home assembler many choices. The “RANGE-READY” assemblies are just that - completely assembled with all necessary parts, ready to snap onto your lower receiver and take to the range for firing. Because many AR shooters may already have a Bolt Carrier Assembly, a Charging Handle, or perhaps an A4 Removable Carry Handle, we offer configurations that allow them to save money and utilize these components. Regardless of configuration, you can be assured that a Windham Weaponry Barreled Upper Receiver Assembly is the same high quality and superb accuracy that we use when assembling our complete rifles.

MPC 16” M4 Upper Receiver/Barrel Assembly- Less Carry Handle - $570.00Part# UR16M4LHBIncludes Bolt Carrier Assembly & Charging Handle

MPC 16” M4 Upper Receiver/Barrel Assembly- Less Bolt Carrier and Charging Handle

$520.00 - Part# UR16M4A4Includes A4 Carry Handle with 300 - 600 Meter Rear Sight

Compliant MPC 16” M4 Upper Rec./Bbl. Assembly- Less Bolt Carrier and Charging Handle

$550.00 - Part# UR16M4A4PBIncludes A4 Carry Handle with 300 - 600 Meter Rear Sight

16” M4 Profile Upper Receiver/Barrel Assembly- Less Bolt Carrier, Charging Handle andA4 Removable Carry Handle$425.00 - Part# UR16M4LH

Ban Compliant 16” MPC M4 Upper Receiver/BarrelAssembly - Less Carry Handle$600.00 - Part# UR16M4LHPBBIncludes Bolt, Bolt Carrier Assembly & Charging Handle

Range-Ready MPC 16” M4 Profile UpperReceiver/Barrel Assembly - $665.00

Part# UR16M4A4B

Includes Bolt Carrier Assembly, Charging Handle, A4 Carry Handle

Compliant 16” MPC M4 Profile UpperReceiver Barrel Assembly - $695.00

Part# UR16M4A4PBB

16” M4 “BAN COMPLIANT” Upper Receiver/Barrel Assemblies for NY / NJ / CT / MA

Ban Compliant MPC 16” M4 Profile Upper Rec./Bbl.Assembly- Less Bolt Carrier, Charging Handle andA4 Removable Carry Handle$455.00 - Part# UR16M4LHPB

This range ready M4 Barreled Upper Receiver Assembly is compliant with regulations in the States of CT, MA, NJ and NY. Differences from the MPC Assemblies above are the permanently affixed A2 birdcage style compensator (shown at left), and the bayonet lug has been machined off. Standard A2 Front Sights are fitted. The aluminum flat top Upper Receiver is complete with Bolt, Bolt Carrier Assembly, Charging Handle, Forward Assist, Ejection Port Cover, and A4 Removable Carry Handle with 300 - 600 meter Dual Aperture Rear Sight.

13


13

16” SRC M4 Profile Upper Receiver/BarrelAssembly - Less Bolt Carrier& Charging Handle$430.00 - Part# UR16M4FT

Range-Ready 16” SRC M4 Profile UpperReceiver/Barrel Assembly - $575.00

Part# UR16M4FTBIncludes Bolt Carrier Assembly and Charging Handle

This is the complete M4 Barreled Upper Assembly from our unique "SRC” rifle. Its tack-driving 16” M4 profile barrel is chrome lined and machined from 4150 Chrome Moly Vanadium 11595E steel - rifled 1 x 9” Right Hand Twist - fitted with an A2 Flash Suppressor. A Picatinny Rail gas block with sling swivel and bayonet lug allows the attachment of a variety of Front Sights. M4 dual heat shield Handguards complete the barrel. The machined aluminum flat top Upper Receiver is complete with Bolt, Bolt Carrier Assembly, Charging Handle, Forward Assist, and Ejection Port Cover - ready for rear sight/optics of choice.

This M4 Barreled Upper Receiver Assembly from our SRC Rifle is compliant with regulations for the States of CT, MA, NJ and NY. The accurate 16” M4 profile barrel is chrome lined and machined from 4150 Chrome Moly Vanadium 11595E Steel with M4 feed ramps, rifled 1 x 9” RHT. The barrel includes a permanently affixed A2 birdcage style compensator (shown at left), and its bayonet lug has been machined off. The Gas Block is our Picatinny Rail type - ready for the addition of accessory front sights. The machined aluminum flat top Upper Receiver is complete with Bolt, Bolt Carrier Assembly, Charging Handle, Forward Assist and Ejection Port Cover.

This superbly accurate Assembly - from our VEX-SS “Varmint Exterminator Rifle” - is ready for the range or varmints. Precision machined from 416R Stainless Steel, it includes a matched bolt and carrier machined from Carpenter 158 Steel which has been magnetic particle and high pressure tested. It is machined to mate with the Compass Lake specification chamber for highest possible accuracy. The barrel is matte finished to avoid reflective glare, and is fluted to reduce weight, increase barrel surface and add rigidity. A Picatinny Rail Gas Block is included should you want to attach a front sight, as are 1/2” high "mini-risers” for the easy attachment of a scope or optic. Button rifling is 1 turn in 8 inches - right hand twist for optimum accuracy with a wide range of heavier .223 Rem. / 5.56mm NATO varmint bullets. NOTE: This assembly is in compliance with regulations in the States of NY / NJ / CT / MA as it has no bayonet lug or flash hider.

16” SRC “BAN COMPLIANT” Upper Receiver/Barrel Assemblies for NY / NJ / CT / MA

Ban Compliant SRC 16” M4 Profile Upper Rec./Bbl.Assembly - Less Bolt Carrier, Charging Handle &A4 Removable Carry Handle$460.00 - Part# UR16M4FTPB

Ban Compliant 16” SRC M4 Profile UpperReceiver/Barrel Assembly - $605.00

Part# UR16M4FTPBB

20” Varmint Exterminator Upper Receiver/Barrel AssemblyPart# UR20FSSFTVB

$775.00Includes Bolt Carrier Assembly & Charging Handle

This heavy barreled Upper Assembly is complete and ready to snap onto your Lower. A highly accurate 16” heavy profile barrel - chrome lined and machined from 4150 Chrome Moly Vanadium 11595E steel is rifled 1 x 9” RHT. An A2 Flash Suppressor and standard A2 Front Sight are fitted. The machined aluminum flat top Upper Receiver is complete with Bolt, Bolt Carrier Assembly, Charging Handle, Forward Assist, Ejection Port Cover, and Removable A4 Carry Handle with 300 - 600 meter Dual Aperture Rear Sight.

HBC 16” Heavy Upper Receiver/Barrel Assembly- Less Carry Handle - $560.00Part# UR16LHBIncludes Bolt Carrier Assembly & Charging Handle

Range-Ready HBC 16” Heavy UpperReceiver/Barrel Assembly - $655.00

Part# UR16A4BIncludes

Bolt Carrier Assembly, Charging Handle, A4 Carry Handle

14


This M4 Barreled Upper Assembly is complete and range or duty ready. The 14.5” M4 Profile Barrel is chrome lined and machined from 4150 Chrome Moly Vanadium 11595E Steel. Rifling is 1 x 7” RHT to stabilize heavier 75 and 77 grain bullets, and the barrel extension has the M4 style feed ramps. An A2 Flash Suppressor and standard A2 Front Sight are fitted. The machined aluminum flat top Upper Receiver is complete with Bolt, Bolt Carrier Assembly, Charging Handle, Forward Assist, Ejection Port Cover, and Removable A4 Carry Handle with 300 - 600 meter Dual Aperture Rear Sight.

HBC 16” Heavy Upper Receiver/Barrel AssemblyLess Bolt Carrier and Charging Handle

$510.00 - Part# UR16A4Includes A4 Carry Handle with 300 - 600 Meter Rear Sight

14.5” M4 Profile Upper Receiver/Barrel Assembly withPhantom Flash HiderLess Bolt Carrier and Charging Handle - $550.00Part# UR14M4-7PHA4Includes A4 Carry Handle & Phantom Flash Hider. Appearance same as assembly above except for Phantom.

16” Heavy Upper Receiver/Barrel AssemblyLess Bolt Carrier, Charging Handle andA4 Removable Carry Handle$415.00 - Part# UR16LH

14.5” “SHORT BARRELLED” Upper Receiver/Barrel Assemblies... These Assemblies have barrel lengths under the legal minimum length for a rifle of 16”, and therefore MUST BE USED IN - OR WITH - A TITLE II RECEIVER (NFA REGISTERED) FOR LEGALITY. This requirement is in accordance with Title 27 Code of Federal Firearms Regulations [Subpart B-Definitions (479.11) (a) thru (g) under Firearms]. For further questions concerning Local, State or Federal compliance, please contact the Alcohol, Tobacco, & Firearms Bureau (http://www.atf.gov/), or consult our Law Enforcement Sales Manager.

14.5” M4 Profile Upper Receiver/BarrelAssemblyLess A4 Carry Handle$570.00 - Part# UR14M47LHBIncludes Bolt, Bolt Carrier Assembly & Charging Handle

Range-Ready 14.5” M4 Profile UpperReceiver/Barrel Assembly - $665.00

Part# UR14M47A4BIncludes Bolt,

Bolt Carrier Assembly, Charging Handle & A4 Carry Handle

Range-Ready 14.5” M4 Profile UpperReceiver/Barrel Assembly - $695.00

Part# UR14M4-7FHA4BIncludes Bolt, Bolt Carrier Assembly,

Charging Handle, A4 Carry Handle & Extended A2 Birdcage

14.5” Upper Receiver/Barrel Assemblies with Extended Flash Hiders - A2 or PhantomThese Assemblies feature pinned & welded over Extended Flash Hiders which comply with 16“ total barrel length for legality.

Range-Ready 14.5” M4 Profile Upper Receiver/Barrel Assemblywith Phantom Flash Hider - $695.00Part# UR14M4-7PHA4BIncludes Bolt, Bolt Carrier Assembly, Charging Handle, A4 Carry Handle. Appearance same as assembly above except for Phantom.

Phantom Flash Hider

Phantom Flash Hider

14.5” M4 Upper Receiver/Barrel AssemblyLess Bolt Carrier and Charging Handle$550.00Part# UR14M4-7FHA4Includes A4 Carry Handle & Extended A2 Birdcage

15

A4 Removeable Carry Handle - $110.00 - Part# 12951011For versatility on Picatinny Rail Flat-Top Uppers, nothing beats the A4 Removable

Carry Handle. Clamp it on when carrying or using its Dual Aperture 1/2 M.o.A. Elevation and Windage Adjustable 300 - 600 Meter Iron Sights or remove to attach scopes or optics. Machined from Hard Anodized Aircraft Aluminum with Steel Thumb Nuts, Clamping Bar and Sight Parts.


Upper Receivers / PartsUpper Receivers / Parts

Complete Charging Handle Assembly for AR15/M16 (A) - $24.95 - Part# 8448517

TacOps-1 Ambidextrous Charging Handle$74.95 - Part# 8448517-TACOPS-1

Badger Tactical Latch for AR15/M16$19.95 - Part# TAC-LATCH

Complete Charging Handle Assembly with aBadger Tactical Latch Installed...$42.95 - Part# 8448517-TAC

(A)

(A)

(A)

(B)

(B)

(C)

(C) (D)

(B)(C) (D)

Machined from high quality 7075T6 Aircraft Aluminum, and Hard Black Anodize finished, this complete Charging Handle Assembly includes the Latch and its Spring and Spring Pin - ready to slide into your Upper Receiver.

Round Forward Assist Parts Kit - $13.50 - Part# KIT-FWDASSIST-RD

Round Forward Assist Only (A) - $12.95 - Part# 9349086Round Forward Assist Spring Only (B) - $0.50 - Part# 8448540Round Forward Assist Spring Pin Only (C) - $0.50 - Part# MS16562-121

To build a new Upper, or replacing lost parts, this Ejection Port Cover Parts Kit includes black phosphate finished Ejection Port Cover (with latch and spring loaded detent installed), Ejection Port Cover Rod, Cover Rod "C” clip and high tensile strength coil spring.

An extended latch for rapid operation of the charging handle with right or left hand, with gloves, or in mud and snow. Perfect for use with a scope, it replaces the standard latch. 8620 ordnance steel with parkerized Mil Spec finish. In service with Marines, SEALs, Rangers, Special Forces and tactical units worldwide.

AR15/M16 Ejection Port Cover Parts Kit - $7.95 - Part# KIT-EPC

Ejection Port Cover Only (A) - $5.95 - Part# 8448525Ejection Port Cover Rod Only (B) - $1.50 - Part# 8448533Ejection Port Cover Spring Only (C) - $0.50 - Part# 8448532Ejection Port Cover “C” Clip Only (D) - $0.50 - Part# MS16632-3012

AR15/M16 Flat-Top Upper Receiver Assembly - $155.00 - Part# URA-FT

AR15/M16 Stripped Flat-Top Upper Receiver - $135.00 - Part# UR-FT

Partially assembled with an Ejection Port Cover and Forward Assist Assembly, this quality CNC machined Upper is 7075T6 Aircraft Aluminum finished in Hard Black Anodize to a non-reflective matte surface for protection against corrosion. It features an integral Picatinny Rail that will accept a wide variety of rear sights, optics, or the A4 Removable Carry Handle.

Build your AR15/M16 from a quality base. CNC Machined from 7075T6 Aircraft Aluminum with an integral Picatinny Rail, this quality Upper with brass deflector is finished in Hard Black Anodize for a non-reflective matte surface and protection against corrosion. Ready for installation of an Ejection Port Cover Kit and Forward Assist Assembly.

14.5” M4 Profile Upper Receiver/Barrel AssemblyLess Bolt Carrier, Charging Handle& A4 Carry Handle $425.00 - Part# UR14M47LH

14.5” M4 Upper Receiver/Barrel AssemblyLess Bolt Carrier & Charging Handle

$520.00 - Part# UR14M47A4Includes A4 Carry Handle

14.5” “SHORT BARRELLED” Upper Receiver/Barrel Assemblies (continued)... THESE ASSEMBLIES MUST BE USED IN - OR WITH - A TITLE II RECEIVER (NFA REGISTERED) FOR LEGALITY.

Developed to offer ambidextrous operation and ease of use with large scopes. "T” shaped handles extend for quicker grasp and dual mode push button latch extends for easier right hand operation from prone position. A 42% larger roll pin and heavier stainless steel latch spring keeps it locked onto receiver. 7075 billet aluminum with a black hard anodize finish. Made in U.S.A.

Charging Handle Latch Only (B) - $3.50 - Part# 8448519High quality steel Charging Handle Latch with locking tab - black phosphate finish.

Charging Handle Latch Spring Only (C) - $0.50 - Part# 8448520High tensile strength spring steel wire for positive Latch function.

Latch Spring Pin Only (D) - $0.50 - Part# 8448521 1/16” x 1/4”

Build a new Upper or renew worn parts. Includes black phosphate finished Forward Assist (pre-assembled with Pawl, Detent, Spring and Pin), Forward Assist Spring, and Spring Pin.

Mini Scope Riser Block for Flat-top Receivers - $14.95 - Part# MR-01 Raises scope or optic above the flat-top upper (purchase 2). Black anodize finished aluminum with screws (1 3/8” long - adds 1/2” height).

16 17

a visual guidea visual guideto the ww-15 rifleto the ww-15 rifle

“The Quality Goes InBefore The Rifle Goes Out”

For Parts Call Toll Free: 1-855-808-1888 — or Order Online: www.windhamweaponry.com

Complete AR Rifles...and Everything to Keep Them Complete.

a visual guideto the ww-15 rifle

ALUMINUMTRIGGER

GUARD ASSY. P/N: 8448587

TRIGGERGUARD

SPRING PINP/N: MS16562-129

TRIGGER SPRINGP/N: 8448593

HAMMER/TRIGGER PINP/N: 8448609

HAMMER/TRIGGER PINP/N: 8448609

HAMMER SPRINGP/N: 8448611

DISCONNECTOR ARP/N: 8448635-AR

DISCONNECTORSPRING

P/N: 8448594

PISTOL GRIPP/N: 9349127

PISTOL GRIP SCREWP/N: AN501D416-18

PISTOL GRIP WASHERP/N: MS35335-61

SAFETY DETENTP/N: 8448631

SAFETY DETENT SPRINGP/N: 8448516

© Windham Weaponry, Inc. 2013

TRIGGER ARP/N: 8448592-AR

HAMMER W. J PIN ARP/N: 9349110-AR

TAKEDOWN PINP/N: 8448584

TAKEDOWNPIN DETENT

P/N: 8448585

TAKEDOWN PINDETENT SPRING

P/N: 8448586

PIVOT PINDETENT SPRING

P/N: 8448586

PIVOT PINDETENT

P/N: 8448585

PIVOT PINP/N: 8448621

CHARGINGHANDLE LATCH

P/N: 8448519 CHARGING HANDLESPRING PINP/N: 8448521

CHARGING HANDLE SPRINGP/N: 8448520

CHARGING HANDLE ASSEMBLYP/N: 8448517

BUFFER RETAINERP/N: 8448582

BUFFER RETAINERSPRINGP/N: 8448583

A4 CARRY HANDLE GROUPWITH 300-600 M REAR SIGHT

P/N: 12951011

TELESTOCKPLATE

P/N: 9390021

TELESTOCKLOCKING RINGP/N: 9390020

TELESTOCK KITP/N: KIT-TELESTK

BUFFER SPRING P/N: 9390022

CARBINE BUFFERP/N: 1005-914-4578

DELTA RINGP/N: 8448712

WELD SPRINGP/N: 8448555

SNAP RINGP/N: MS16626-1137

EJECTION PORT COVERP/N: 8448525

EJCT. PORTCOVER ROD C-CLIPP/N: MS16632-3012

EJCT. PORT COVER SPRINGP/N: 8448532

EJCT. PORT COVER RODP/N: 8448533

BARREL NUTP/N: 9349054BBLN

BARREL EXTENSIONP/N: 9349054-W2BE

HANDGUARD CAPP/N: HCAP-RDHVYM4

MAGAZINE CATCHP/N: 8448638

MAGAZINE CATCHSPRING

P/N: 8448637

MAGAZINE CATCH BUTTONP/N: 8448636

BOLT ASSEMBLY COMPLETEP/N: 8448509

EXTRACTOR CARTRIDGEP/N: 8448512

BOLTGAS RINGS (3)

P/N: KIT-GASRINGS

MAGAZINES30 / 20 / 10 / 5 ROUND

BOLT CARRIERWITH KEY

P/N: 8448505

M16 BOLT CARRIER ASSEMBLYP/N: 8448501

BOLT CARRIER KEYP/N: 8448506

BOLT CAM PINP/N: 8448502

BOLT CATCHPLUNGERP/N: 8448634

BOLT CATCH SPRING PINP/N: MS16562-119

BOLT CATCHP/N: 8448628

BOLT CATCH PLUNGERSPRING P/N: 8448633

FIRING PIN-M16P/N: 8448503

FIRING PINRETAINING PINP/N: 8448504

GAS KEY SCREWS (2)P/N: 8448508

FRONT SIGHT POSTP/N: 9349056

FRONT SIGHT POST DETENTP/N: 8448573

FRONT SIGHT POST DETENT SPRINGP/N: 8448574

SLING SWIVELP/N: 8448571

FRONT SIGHT TAPER PIN (2 REQUIRED)P/N: 8448575

SLING SWIVEL RIVETP/N: 8448697

FRONTSIGHTBASE A2 FLASH

SUPPRESSORP/N: 9349051

CRUSH WASHER FOR A2 FLASHSUPPRESSOR

P/N: 12991533

BARREL ASSEMBLY w. M4 CUTAWAY

CARBINE GAS TUBE P/N: 1005-914-3504

GAS TUBE SPRING PIN P/N: MS16562-106

FORWARD ASSIST ASSY. ROUND P/N: 9349086

FORWARD ASSISTSPRING

P/N: 8448540

FORWARD ASSISTSPRING PIN

P/N: MS16562-121

DUAL HEATSHIELD HANDGUARDSP/N: DS4-HANDGUARD

M4 PROFILE CHROME LINED 16” BARREL4150 CHROME MOLY VANADIUM 11595E STEEL

SAFETY SELECTOR ARP/N: 9381367-AR

EJECTOR SPRINGP/N: 8448516

EJECTOR CARTRIDGEP/N: 8448515

EJECTOR SPRING PINP/N: MS16562-98

EXTRACTOR PINP/N: 8448513

EXTRACTOR SPRING INSERTP/N: 8448755-INSERT

EXTRACTOR SPRINGP/N: 8448755

EXTRACTOR “O”RINGP/N: 8448755-ORING

The U.S.A.

Made in

18

Barrel Kits / Barrels / Barrel PartsBarrel Kits / Barrels / Barrel PartsWindham Weaponry Barrel Kits, Barrels and Parts are all the highest quality we can produce. Barrel

blanks start as raw 4150 Chrome Moly Vanadium 11595E steel - the finest and most appropriate steel for a gun barrel. After drilling, the button rifling process takes place. Most are rifled 1 turn in 9” - right hand twist - which we have found to be the best compromise for the widest range of bullet weights. Rifling is altered for specific applications: VEX-SS barrels are 1 in 8” twist for the generally heavier bullets used in varmint hunting; some short LE barrels are done in 1 x 7” for stability in a short barrel.

After rifling, the barrel is lathe turned to the particular barrel profile, and hardened to Rockwell C26 - 33. A Chrome Lining is applied to the barrel and chamber (except the Stainless Steel VEX) as the chrome finish offers easier cleaning, protection against corrosion and rust, and longest wear possible - lasting thousands of rounds longer than non-chromed barrels. The chrome lining in the barrel and chamber also adds a natural lubricity which improves chambering and extraction, and improves bullet velocity.

In final steps, steel barrels are finished in Black Manganese Phosphate to a rich matte black, non reflective surface that also protects against rust and corrosion. The stainless steel VEX barrels are matte finished to reduce reflection and improve hunting concealment.

Windham Weaponry Barrel Kits contain all necessary parts forward of the receiver - kit descriptions will list exact contents. We also sell barrel “sub-assemblies”, that are basically the barrel only with necessary parts that enable the home gunsmith to economically replace a worn barrel or change a barrel configuration utilizing their existing handguards, flash hiders, etc.

This premium Barrel Kit from our "MPC” Rifle - 16” in length, turned with the M4 profile, includes all parts forward of the Upper Receiver including Barrel Extension (with M4 Feed Ramps), Barrel Nut, Delta Ring, Weld Spring, Snap Ring, Gas Tube, Gas Tube Spring Pin, M4 Double Heatshield Handguards,

Front Handguard Cap, A2 Standard Sight Base with Sling Swivel, Front Sight Post, Front Sight Detent, Bayonet Lug and A2 Flash Hider with Crush Washer. Machined from 4150 Chrome Moly Vanadium 11595E Steel, Chrome lined in bore and chamber, and Black Manganese Phosphate finished for protection against rust and corrosion. Button rifled 1 turn in 9 inches - right hand twist for optimum accuracy with a wide range of .223 / 5.56mm ammunition.

Our highly accurate 16” Heavy Barrel Kit includes all parts needed for complete assembly. Machined from 4150 Chrome Moly Vanadium 11595E Steel with a Chrome lining for long wear and easy

cleaning, this Heavy Profile barrel is .950“ diam. under the handguards, and .745” straight from the sight base forward. Button rifling is 1 turn in 9” (RHT), and finished in Black Manganese Phosphate for protection against rust and corrosion. Includes the Barrel Sub-Assembly with M4 feed ramps, M4 Dual Heatshield Handguards, Delta Ring, Weld Spring, Snap Ring, Gas Tube, Gas Tube Spring Pin, Crush Washer, and A2 Birdcage Flash Hider.

This M4 profile sub-assembly is perfect for replacing an old, worn or inaccurate barrel. Machined from 4150 Chrome Moly Vanadium 11595E Steel, chrome lined for long wear and easy cleaning, button rifled 1 turn in 9” (RHT). The Black Manganese Phosphate finish protects against rust and corrosion. Includes Barrel with M4 feed ramps, Front Sight Base (installed with Front Sight Post, Detent, Detent Spring, Sling Swivel and Rivet), Barrel Nut, and Handguard Cap.

MPC 16” Barrel Kit - $245.00Part# KIT-BA16M4

MPC 16” Barrel Sub-Assembly - $215.00Part# BA16M4

In Heavy Profile under the handguard area, and turned straight from the sight base forward to the threaded muzzle, this sub-assembly makes a great replacement or part of your new rifle build. 4150 Chrome Moly Vanadium 11595E Steel with a chrome lining and button rifling (1 turn in 9” RHT). Finished in Black Manganese Phosphate for protection against rust and corrosion. This Barrel Sub-Assembly includes Barrel with M4 type feed ramps, Front Sight Base (installed with Front Sight Post, Detent, Detent Spring, Sling Swivel and Rivet), Barrel Nut, Handguard Cap and Threaded Muzzle.

HBC 16” Barrel Sub-Assembly - $205.00Part# BA16HB

HBC 16” Heavy Barrel Kit - $235.00Part# KIT-BA16HB

19

Barrel Kits / Barrels / Barrel PartsBarrel Kits / Barrels / Barrel PartsHighly accurate, and light weight, these components are from our "SRC” Rifle - similar to

the 16” MPC barrel but with a Picatinny Rail Gas Block attached (using taper pins). Mount a variety of accessory front sights on it or, leave it "bare” if you intend to use a scope. 4150 Chrome Moly Vanadium 11595E Steel with Chrome lining in bore and chamber for long wear

and ease of cleaning, Black Manganese Phosphate finished. Button rifled 1 turn in 9” (RHT), for optimum accuracy with a wide range of .223/5.56mm ammo. This kit includes Barrel Extension (with M4 Feed Ramps), Barrel Nut, Delta Ring, Weld Spring, Snap Ring, Gas Tube, Gas Tube Spring Pin, M4 Double Heatshield Handguards, Handguard Cap, Picatinny Rail Gas Block with Sling Swivel, Bayonet Lug and A2 Flash Hider with Crush Washer.

This Kit is much the same as the SRC M4 Kit above but substitutes the 16” Heavy Profile Barrel. Includes a taper pinned Picatinny Rail Gas Block. 4150 Chrome Moly Vanadium 11595E Steel with chrome

lining in Bore and Chamber - button rifled 1 turn in 9” (RHT) - Black Manganese Phosphate finished. Includes the Barrel Extension (with M4 Feed Ramps), Barrel Nut, Delta Ring, Weld Spring, Snap Ring, Gas Tube, Gas Tube Spring Pin, M4 Double Heatshield Handguards, Handguard Cap, Picatinny Rail Gas Block with Sling Swivel, Bayonet Lug and A2 Flash Hider with Crush Washer, Muzzle is threaded 1/2” x 28 T.P.I.

This Sub-assembly from our SRC Rifle has the M4 profile with a Picatinny Rail Gas Block attached with taper pins. Mount a variety of accessory front sights, or, leave it "bare” if you intend to use a scope. Barrel material is 4150 Chrome Moly Vanadium 11595E Steel, and it is chrome lined in both Bore and Chamber for long wear and ease of cleaning. Button rifled 1 turn in 9“ (RHT) for optimum accuracy with a wide range of .223 / 5.56mm ammunition. Black Manganese Phosphate finished, includes the Barrel Extension (with M4 Feed Ramps), Barrel Nut, Handguard Cap, Picatinny Rail Gas Block with Sling Swivel, and Bayonet Lug. Muzzle is threaded 1/2” x 28 T.P.I. to accept a variety of flash hiders or muzzle brakes.

Like the SRC M4 Sub-Assembly above but with our Heavy Barrel. Picatinny Rail Gas Block attached with taper pins, button rifled 1 turn in 9“ (RHT), Black Manganese Phosphate finished. Includes Barrel Extension (with M4 Feed Ramps), Barrel Nut, Handguard Cap, Picatinny Rail Gas Block with Sling Swivel, and Bayonet Lug. Muzzle is threaded 1/2” x 28 T.P.I. to accept a variety of flash hiders or muzzle brakes.

Our Varmint Exterminator Barrel Sub-Assembly is precision turned from 416R Stainless Steel and includes a Carpenter 158 Steel Matched Bolt - magnetic particle and high pressure tested, and machined to mate with the Compass Lake specification Chamber for highest possible accuracy. Matte finished to avoid varmint spooking glare, it is fluted to reduce weight, increase barrel surface heat loss and add rigidity. A Picatinny Rail Gas Block with set screws is included for front sight attachment. Button rifling is 1 turn in 8” (RHT) for optimum accuracy with a wide range of the heavier .223 Rem. varmint bullets.

SRC 16” Barrel Kit$255.00Part# KIT-BA16M4FT

SRC 16” Heavy Barrel Kit - $245.00Part# KIT-BA16FT

VEX-SS 20” Barrel Kit - $415.00Part# KIT-BA20FSS

VEX-SS 20” Barrel Sub-Assembly - $340.00Part# BA20FSS

SRC 16” Barrel Sub-Assembly - $225.00Part# BA16M4FT

SRC 16” Heavy Barrel Sub-Assembly$215.00 - Part# BA16FT

Our highly accurate Varmint Exterminator Barrel - with all parts forward of the upper receiver - is precision machined of 416R Stainless Steel, and button rifled 1 turn in 8” (RHT) for optimum accuracy with a wide range of

heavier .223 varmint bullets. The matte finish reduces reflection, and fluting keeps weight to a minimum, increases barrel surface heat loss and adds rigidity. A matched bolt of Carpenter 158

Steel is magnetic particle and high pressure tested, and machined to mate with the Compass Lake specification chamber for utmost accuracy. A Picatinny Rail Gas Block with set screws is included should you want to attach a front sight. A rifle length gas tube, gas tube spring pin, and our 6061 machined aluminum Free-Float Forend with specialized barrel nut, rear knurled locking ring and sling swivel / bipod stud are also included.

20

Barrel Kits / Barrels / Barrel PartsBarrel Kits / Barrels / Barrel Parts

20

Similar to our "MPC” Barrel Kit with exception of a permanently affixed A2 birdcage style compensator to comply with CT, MA, NJ and NY regulations. M4 profile turned with all parts forward of the Upper

Receiver: Barrel Extension (with M4 Feed Ramps), Barrel Nut, Delta Ring, Weld Spring, Snap Ring, Gas Tube, Gas Tube Spring Pin, M4 Double Heatshield Handguards, Handguard Cap, A2 Standard Sight Base with Sling Swivel, Front Sight Post and Front Sight Detent. 4150 Chrome Moly Vanadium 11595E Steel, chrome lined bore and chamber, Black Manganese Phosphate finish. Button rifled 1 in 9” (RHT).

This short M4 Barrel - 14.5” in length - has the M4 turning for mounting a grenade launcher, and the barrel extension has the M4 style feed ramps. Also included are the Barrel Nut, Front Handguard Cap, A2 Standard Sight Base with Sling Swivel, Front Sight Post, Front Sight Detent, and Bayonet Lug. Machined from 4150 Chrome Moly Vanadium 11595E Steel, chrome lined in both Bore and Chamber, and Black Manganese Phosphate finished for protection against rust and corrosion. Button rifled 1 turn in 7“ (RHT) to stabilize the heavier 75 and 77 grain bullets. Muzzle is threaded 1/2” x 28 tpi to accept a variety of flash hiders or muzzle brakes.

14.5” Short Barrel Kit$245.00Part# KIT-BA14M4-7

MPC 16” Compliant M4 Barrel Kit$275.00 - Part# KIT-BA16M4-PB

SRC 16” Compliant M4 Barrel Kit - $285.00 - Part# KIT-BA16M4FT-PB

Windham Weaponry Picatinny Rail Gas Block$59.95 - Part# KIT-PICBLOCK

14.5” Short Barrel Sub-Assembly - $215.00 - Part# BA14M4-7

WINDHAM WEAPONRY “SHORT” BARRELS... NOTICE: These parts must be used in - or with - a Title II Receiver (NFA Registered) for legality as required in accordance with Title 27 Code of Federal Firearms Regulations [Subpart B-Definitions (479.11) (a) thru (g) under Firearms]. For any questions the Alcohol, Tobacco, & Firearms Bureau (local listings available at: http://www.atf.gov/ ). A “short” barrel is any barrel less than 16” in length used on a rifle. These can only be used on weapons registered as a full-auto, or legal short barreled rifle. Our Law Enforcement Sales Manager may be able to answer other questions regarding this BATF restriction.

WINDHAM WEAPONRY “COMPLIANT” BARRELS... Have permanently affixed A2 birdcage style compensators that make them legal for sale in the States of New York / New Jersey / Massachusetts and Connecticut. The compensator is pinned on, and then welded over before finishing. Attempted removal will destroy the muzzle.

Windham Weaponry has developed a solid steel Gas Block with an integral Picatinny Rail to allow mounting the

accessory front sight of your choice, or leave it “bare”if you choose to shoot with a scope or optics. Replaces your existing 3/4” internal diameter front sight/gas block. Slip on fit is then tightened with supplied set screws. It has a pre-drilled gas path hole, gas tube hole and gas tube spring pin hole, and includes the Windham Weaponry "WW” machined into the front face. This rugged unit is machined from solid billet stock, bead blasted, and then black manganese finished for a durable non-reflective surface.

This premium 14.5”Short Barrel Kit has the M4 profile (designed for mounting a grenade launcher) and must be used with a Title II receiver. It includes all parts forward of the Upper Receiver: Barrel Extension (with M4 Feed Ramps), Barrel Nut, Delta Ring, Weld Spring, Snap Ring, Gas Tube, Gas Tube Spring Pin, M4 Double Heatshield Handguards, Handguard Cap,

A2 Standard Sight Base with Sling Swivel, Front Sight Post, Front Sight Detent, Bayonet Lug and A2 Flash Hider with Crush Washer. Machined from 4150 Chrome Moly Vanadium 11595E Steel, chrome lined in both bore and chamber, and Black Manganese Phosphate finished for protection against rust and corrosion. This barrel is button rifled 1 turn in 7” - right hand twist (RHT) to stabilize the heavier 75 and 77 grain bullets.

ALSO AVAILABLE: 14.5” M4 Barrel Kit with A2 Extended “Birdcage” Flash Hider - $275.00Part# KIT-BA14M4-7-A2X - All parts forward of Receiver, Rifled 1 x 7, Pinned & Welded Extended Birdcage, 16” overall.14.5” M4 Barrel Kit with Phantom Flash Hider - $275.00 - Part# KIT-BA14M4-7-PHAN5C2 - All parts forward of Receiver, Rifled 1 x 7, Pinned & Welded Phantom, 16” overall legal length.14.5” M4 Barrel “Only” with A2 Extended “Birdcage” Flash Hider - $245.00 - Part# BA14M4-7-A2X14.5” M4 Barrel “Only” with Phantom Flash Hider - $245.00 - Part# BA14M4-7-PHAN5C2

With its permanently affixed A2 birdcage style compensator (complies with CT, MA, NJ and NY regulations), this “SRC” barrel features a Picatinny Rail Gas Block (taper pin attached) for mounting accessory front sights, or leave it “bare” if you intend to shoot with a scope or optics. M4 profile with all parts forward of the Upper Receiver. Machined from 4150 Chrome Moly Vanadium 11595E Steel, chrome lined in bore and chamber and Black Manganese Phosphate finished. Button rifled 1 turn in 9” (RHT).

21

Barrel PartsBarrel PartsLow Profile Gas Block - $45.00 - Part# GB-LOPRO-SI

A2 Square Front Sight Post$4.95 - Part# 9349056

A2 Square Front Sight Post - .040” Taller Height$4.95 - Part# 9349056-MOD

A2 Square Front Sight Post - .260" in height / .070 "wide. Black manganese phosphate finished steel. Fits standard A2 Front Sight Base.

This machined steel Detent engages the notches on the Sight Post to lock it at the desired height when sighting in your rifle.

The .040” taller Sight Post is required in the A2 Standard Front Sight Base when used with a Colt A4 Removable Carry Handle. It’s also needed with the Diamondhead RS-10001 Rear Flip Sight. Quality gun steel - finished in black manganese phosphate.

Front Sight Parts Due to the difficulties of retro-fitting the A2 Front Sight Bases to barrels, Windham Weaponry does not sell this part. All other A2 Front Sight parts are available.

Front Sight Post Detent$0.95 - Part# 8448573

AR15/M16 standard front sling swivel for the front sight base. Black phosphated steel with rubberized coating for quiet operation. The 1/8” x 7/16” black rivet is specifically sized to fit the A2 Front Sight Base.

Front Sling Swivel & RivetRivet - $0.95 - Part# 8448697Swivel - $2.95 - Part# 8448571

The Handguard Cap locks the front of the carbine handguards onto the barrel so they won't rotate or rattle. Stamped steel, with gas tube hole - black manganese phosphate finish.

Round Handguard Cap for .75” Bbl.$2.95 - Part# HCAP-RDHVY

Barrel Nut for AR15/M16$7.95 - Part# 9349054BBLN

Standard A2 "Birdcage” Flash Hider with five venting slots on top and sides. Bottom is closed to avoid a dust signature when shooting prone. High quality steel, threaded 1/2” x 28 T.P.I., with Black Phosphate finish. This Flash Hider should be installed with a Crush Washer for proper "timing” (positioning) of gas venting slots.

The Crush Washer is sold separately here:

The Phantom controls muzzle flash effectively with five longitudinal vents, and reduces dust signature when shooting prone. The grooved

base accepts training attachments and sound suppression devices for LE / military personnel. Threaded ½” – 28 t.p.i. - includes a crush washer for proper “timing”. High quality steel with black manganese phosphate finish.

Patterned after the standard A2 Birdcage, it fits standard thread AR15/M16 barrels, and is shipped with a peel washer for proper port timing. When pinned and welded on a 16” or longer barrel, it complies with regulations for use in NY, NJ, CT and MA. Machined steel with a black manganese finish.

With specially angled helical flutes, the Vortex effectively hides flash, and aligns exiting barrel gas to improve accuracy. A base ring groove allows integration of Blank Firing Attachments for LE trainers, and permits installation of Smith Enterprise SEI Direct Connect Sound Suppressors. Threaded ½” - 28 t.p.i. - no crush washer required. 8620 bar stock - heat-treated and Parkerized matte black.

A2 Flash Hider for AR15/M16$6.95 - Part# 9349051

Extended Length A2 “Birdcage” Flash Hider for AR15/M16 - $35.95 - Part# FS-A2X

Phantom Flash Hider - $34.00Part# FH-PHANTOM-5C2

A2 Birdcage Type Muzzle Brake$59.95 - Part# MB-A2-PB

Vortex Flash Hider$59.95 - Part# FH-VORTEX

< A2 Flash Hider Crush Washer - $2.95 - Part# 12991533

Provides pressure for the Front Sight Post Detent to hold the Sight Post in position. High tensile strength spring steel.

Front Sight Post Detent Spring$0.50 - Part# 8448574

The correct way to affix a Front Sight Base to a barrel - two required. Tapered machined steel with black phosphate finish.

Front Sight Taper Pin$0.95 - Part# 8448575

This kit includes a machined aluminum Delta Ring, a spring steel Weld Spring, and the steel Snap Ring that retains these pieces on the Barrel Nut. Top quality, made in USA.

Delta Ring Kit for AR15 / M16$10.95 - Part# KIT-DELTARING

Individual Parts:Delta Ring - $6.95 - Part# 8448712Weld Spring - $4.50 - Part# 8448555Snap Ring - $1.50 - Part# MS16626-1137

High quality stainless steel - drilled with gas and spring pin holes, designed to function perfectly in any AR15/M16. Choose the length to fit your barrel.

Assembled before the barrel extension is torqued, the barrel nut is the crucial link between barrel assembly and upper receiver. Highest quality steel - black manganese phosphate finish.

Gas Tubes for AR15/M16 Rifles & Carbines...Rifle Length (20”+ Bbl.) $11.95 - Part# 8448567CAR Length $11.95 - Part# 1005-914-3504

Gas Tube Spring Pin$0.50 - Part# MS16562-106

These quality machined steel Gas Blocks are lightweight, strong and small enough to use with almost any handguard. Mounted with set screws on the bottom (if your barrel has nocorresponding "dimples”, some drilling/gunsmithing may be required). Use Green Loctite on the gas block, and Red Loctite on the set screws when installing. This gas block will fit on .750” diameter barrels. Black phosphate finished - made in the U.S.A.

5/64” x 5/16”

This version of the A2 Bird Cage Flash Hider makes a 14.5” barrel a legal length of 16” when pinned and welded over (one hole for pinning and welding located on the bottom), or it can be threaded onto any standard 16“ barrel. Threaded 1/2” x 28 T.P.I., with Black Phosphate finish. Overall length is 2 ¼”. Should be installed with a Crush Washer for proper port "timing”

22

Lower Receiver Parts / Parts KitsLower Receiver Parts / Parts Kits

This complete Windham Weaponry Lower Receiver Parts Kit will give you everything needed to build up a stripped Lower, or keep your AR functioning in the toughest conditions. All highest quality parts, this kit includes: AR Hammer with J-Pin; Hammer Spring; AR Safety Selector Lever; Safety Detent; Safety Detent Spring; Bolt Catch; Bolt Catch Spring Pin; Bolt Catch Plunger; Bolt Catch Spring; Magazine Catch; Magazine Catch Spring; Magazine Catch Button; Takedown/Pivot Pin Detents (2); Takedown/Pivot Pin Springs (2); Pivot Pin; Takedown Pin; AR Trigger; Trigger Spring; AR Disconnector; Disconnector Spring; Trigger Guard (Aluminum); Trigger Guard Spring Pin; Hammer/Trigger Pins (2); Pistol Grip; Pistol Grip Screw; Pistol Grip Washer; Buffer Retainer; Buffer Retainer Spring.

Complete Lower Receiver Parts Kit for AR15$68.95 - Part# KIT-LOWER-AR

Here are all the critical Windham Weaponry Fire Control Parts Kit necessary to keep your AR range-ready. Highest quality parts includes: AR Hammer with J-Pin; Hammer Spring; AR Safety Selector Lever; AR Trigger; Trigger Spring; AR Disconnector and Disconnector Spring. Essential spares for all emergencies.

Fire Control Parts Kit for AR15 - $44.95 - Part# KIT-FIRECONTROL-AR

Through our partnership with Patriot Ordnance, we can now offer their high quality Ambidextrous Safety. These black phosphate finished steel parts are machined to close tolerances for crisp operation from either side of the receiver. An easy installation for any AR15 or M16 that will enhance the safe handling of your rifle. Made in U.S.A.

AR15 Hammer with J-Pin Only (A) $15.95 - Part# 9349110-ARAR15 Hammer Spring Only (B) $1.50 - Part# 8448611AR15 Disconnector Only (C) $5.95 - Part# 8448635-ARAR15 Disconnector Spring Only (D) $0.50 - Part# 8448594AR15 Trigger Only (E) $12.95 - Part# 8448592-ARAR15 Trigger Spring Only (F) $0.95 - Part# 8448593AR15 Safety Selector Only (G) $9.95 - Part# 9381367-AR

(A)

(A)

(A)

(B)

(B)

(C)

(B)

(C)

(D)

(F)(E)

(G)

POF Ambidextrous Safety for AR15/M16 - $24.95 - Part# AMBI-SFTY-AR

Safety Selector Detent for AR15/M16 - $0.95 - Part# 8448631Safety Selector Detent Spring for AR15/M16 - $0.50 - Part# 8448516

New original Windham Weaponry parts to replace the malfunctioning magazine catch on your rifle - a black phosphate finished Magazine Catch with a black anodized aluminum Magazine Catch Button and a new, high tensile strength coil spring - easily installed to properly retain the magazine.

Magazine Catch Parts Kit for AR15/M16 - $7.95 - Part# KIT-MAGCAT

Black finished, machined Steel Pins to hold either the Hammer or Trigger in the Lower Receiver. Two are required per rifle (sold individually) the same part is used for both applications.

See Catalog center spread - Pages 16/17 - to identify where any of these parts are used in the AR15/M16 rifle.

Hammer/Trigger Pins for AR15 - $1.25 ea. - Part# 8448609

Buffer Retainer for AR15/M16 (A) - $1.50 ea. - Part# 8448582Buffer Retainer Spring for AR15/M16 (B) - $0.50 - Part# 8448583

Magazine Catch for AR15/M16 Only (A) $4.95 - Part# 8448638Magazine Catch Button Only (B) $3.50 - Part# 8448636Magazine Catch Spring Only (C) $0.50 - Part# 8448637

WINDHAM WEAPONRY does not sell Lower Receivers separately as the “Lower” is the part of the weapon system that can only be sold to a Federally Licensed Firearms Dealer.

(A)

(B)If you broke the old plastic trigger guard on your AR in last winter’s cold, or just

want to upgrade to the strength and beauty of an aluminum piece, this is the kit. Includes a finely machined black anodized aluminum trigger guard with a spring loaded detent pin already installed. A new steel ¼ X 5/8 spring pin is included.

Aluminum Trigger Guard Parts Kit for AR15/M16 - $7.25 - Part# KIT-TRIGGUARD-ALUM

Aluminum Trigger Guard Only for AR15/M16 (A) $6.95 - Part# 8448587Trigger Guard Spring Pin Only for AR15/M16 (B) $0.50 - Part# MS16562-129

This black anodized aluminum drop-in replacement for the AR15/M16 weapons platform features a shallow "V" shape for better use with gloves in tactical shooting or cold weather. It is non-folding, has rounded edges, and fills the annoying "gap" at the rear of the standard trigger guard. Mounting hardware - a spring pin and special long allen head screw is included.

Magpul Enhanced Trigger Guard - $19.95 - Part# 8448587-MP-ENHANCED

23

This Kit is designed to provide every part you would need to keep your rifle fully functional in the field - the perfect emergency selection to stow in your rifle case! All are top quality Windham Weaponry parts including: an M16 Firing Pin; a Firing Pin Retaining Pin; Bolt Cam Pin; Extractor Cartridge; Extractor Pin; Extractor Spring; Extractor Spring Insert; Extractor O-Ring; a set of 3 Bolt Gas Rings; Hammer and Trigger Springs; Disconnector Spring; Hammer and Trigger Pins; a Front Sight post (taller .040” height); an A1/A2 Front Sight Adjusting Tool and a CP-02 Chamber Plug/Safety Tool. Never be without that critical part to keep your rifle firing!

Here are all those critical little parts that seem to go missing when you’re working on your rifle - the ones that pop out of sight under the bench - disappear somewhere into the toolbox - you know what we mean. Included in the "Most Wanted Kit” are: Pivot Pin Detents (4); Pivot Pin Detent Springs (4); Safety Detents (2); Safety Detent Springs (2); Firing Pin Retaining Pins (2); Buffer Detents (2); Buffer Detent Springs (2); Extractor Springs (2); Extractor Spring Inserts (2); Extractor O-Rings (2). Never be troubled by the loss of critical "Most Wanted Parts” again!

Most Wanted Parts Kit for AR15/M16 - $14.95 - Part# KIT-MOSTWANTED

Lower Receiver Parts / Parts KitsLower Receiver Parts / Parts Kits

(C)

(B)

(A)

(A)

(D)

(B)

(C)

The black phosphate finished steel Pivot Pin acts as the “hinge” between the Upper and Lower and is locked within the Lower Receiver by its spring tensioned detent to avoid loss.

Two Detents and two Detent Springs are required in the Lower Receiver - the same respective parts are used for both applications. They help retain and position both the Take Down & Pivot Pins in the Lower Receiver.

The Take Down Pin locks the Upper & Lower Receivers together, and is held "captive” within the Lower by its spring tensioned detent to avoid loss. Machined steel with black phosphate finish.

Takedown Pin for AR15/M16 (A) - $3.95 - Part# 8448584

This standard A2 Black Pistol Grip features checkered side panels, forward finger ridge and serrated back strap. Molded from a Nylon 6/6 resin enhanced to improve toughness, impact resistance and heat stability, the grip mounts easily onto the Lower Receiver with a black phosphated Allen Head Pistol Grip Screw and External Tooth Lock Washer (supplied). Use a long 3/16" Allen wrench for installation.

A2 Pistol Grip Parts Kit for AR15/M16 - $6.50 - Part# KIT-PISTOLGRIP-A2

This high quality assembly from Patriot Ordnance easily drops into your receiver to replace the existing trigger, hammer, disconnector and springs. The black phosphate finished steel components are permanently assembled into a red anodized block of solid aircraft aluminum to offer a crisp single stage trigger pull and durable longevity. Average "pull weight” of this trigger assembly is 4.5 to 5 lbs., and included with the kit are a hammer and trigger pin and "lock plates” that mount on the outside of the lower receiver. The supplied Allen Head screws are Loctite treated so the hammer and trigger pins won’t "walk out” under fire. Made in U.S.A.

POF Drop In Trigger/Hammer Assembly for AR15 - $189.95 - Part# 8448592-1STAGE

Pivot Pin for AR15/M16 (B) - $3.95 - Part# 8448621

Takedown & Pivot Pin Detent for AR15/M16 (C) $0.50 - Part# 8448585Takedown & Pivot Pin Detent Spring (D) $0.50 - Part# 8448586

A2 Black Plastic Pistol Grip Only (A) $5.95 - Part# 9349127A2 Pistol Grip Screw Only (B) $0.95 - Part# AN501D416-18A2 Pistol Grip Toothed Washer Only (C) $0.50 - Part# MS35335-61

This high quality drop-in trigger/hammer system requires no gunsmithing to give your small-pin AR-15 a rugged, reliable trigger. CMMG custom grinds 10 separate contact surfaces on the trigger, disconnector, and hammer for a crisp, precise, consistent two-stage pull. Each trigger is function tested at the factory, brass bushings reduce friction for an ultra-smooth pull and fast lock time. A rounded, low mass hammer further speeds lock time and reduces wear on contact surfaces, and trigger pull weight is approximately 5 to 7.5 lbs. Manufactured of black oxide finished steel with brass bushings. Standard weight trigger and hammer springs are included, and this kit will work with aftermarket reduced-power springs. The CMMG Two Stage Trigger Kit works with small pin (.154” diameter) AR-15 Rifles and .308 Mk3 Rifles - also functions well in .22 LR conversions.

CMMG 2-Stage Trigger Kit for AR15/M16 - $119.95 - Part# 8448592-2STAGE-C

Field Repair Kit for AR15/M16 - $34.95 - Part# KIT-FIELDREPAIR

These high quality Windham Weaponry parts will restore your rifle’s Bolt Catch operation to new standards. The steel Bolt Catch, and Bolt Catch Plunger are in black phosphate finish, and the high tensile strength Bolt Catch Plunger Spring and new Steel Spring Pin will provide long life.

Bolt Catch Parts Kit for AR15/M16 - $9.95 - Part# KIT-BOLTCAT (A) (B)

(C) (D)

Bolt Catch for AR15/M16 Only (A) $7.95 - Part# 8448628Bolt Catch Spring Pin Only (B) $0.50 - Part# MS16562-119Bolt Catch Plunger Only (C) $1.95 - Part# 8448634Bolt Catch Plunger Spring Only (D) $0.50 - Part# 8448633

24

Magazines / Magazine AccessoriesMagazines / Magazine Accessories

The Windham Weaponry 30 Rd. Magazine is manufactured to the highest possible standards to offer you the utmost in reliability, performance and durability. They incorporate the best Magpul® Gen III self leveling follower featuring a four way anti-tilt design with spring stabilizers on top of a 17-7 PH stainless steel spring. The 6061-T6 aluminum magazine box is black Teflon® coated inside and outside. A Windham Weaponry Logo stamped base plate is removable for cleaning. Made in USA.

Due to state regulations this magazine cannot be shipped to California, District of Columbia, Maryland, Massachusetts, New Jersey, New York, or Hawaii.

The Magpul PMAG is a 30-round 5.56x45 NATO (.223 Rem.) AR15/M16 compatible magazine. It features an advanced impact resistant polymer construction, a pop-off Impact/Dust Cover for storage, and an easy to disassemble design with a flared floorplate for positive magazine extraction from pouches. The PMAG 30 utilizes a resilient stainless steel spring for corrosion resistance and an anti-tilt, self-lubricating follower for increased reliability. This high quality magazine has been updated with a new body ribbing design which allows for better compatibility with aftermarket mag couplers, and a new follower which provides smoother loading with military stripper clips. Its Impact/Dust Cover can be snapped onto the floorplate when not in use to prevent possible loss. Made by Magpul in the U.S.A.

Due to state regulations this magazine cannot be shipped to California, District of Columbia, Maryland, Massachusetts, New Jersey, New York or Hawaii.

The Magpul PMag 20-round polymer magazine for 5.56x45 NATO (.223 Rem.) is constructed from advanced polymers with superior impact resistance and light weight. It fits all AR15/M16 rifles, and features advanced impact resistant polymer construction and a straight body to keep a low profile in the rifle. A controlled-tilt follower keeps ammo feeding consistently, and a high quality stainless steel spring ensures proper tension. Also included is a pop-off Impact/Dust Cover to protect the feed lips from impacts and debris while in storage, and it can be snapped onto the floorplate when not in use to prevent possible loss. The magazine body’s textured finish and flared floorplate improved handling over standard magazines - the flared floorplate offers positive magazine extraction from pouches, and the design of the floor plate offers simple disassembly using the impact cover or a punch for cleaning and maintenance. Made in U.S.A.

Due to state regulations this magazine cannot be shipped to California, District of Columbia, Massachusetts, New Jersey and New York, Hawaii.

.223/5.56mm 30 Round Magazine for AR15/M16 - $19.95 - Part# 8448670

Magpul PMAG 30 Round Magazine - $14.95 - Part# 8448670-PMAG

Magpul PMAG 20 Round Magazine - $13.95 - Part# 8448670-20-PMAG

.223/5.56mm 20 Round Magazine - $19.95 - Part# 8448670-20

.223/5.56mm 10 Round Magazine for AR15/M16 - $19.95 - Part# 8448670-10

.223/5.56mm 5 Round Magazine for AR15/M16 - $19.95 - Part# 8448670-5

Mission First Magazine Coupler for AR15/M16 - $11.95 - Part# MAG-CPLR-MFT

Like the 30 Round above, the Windham Weaponry 20 Rd. Magazine offers reliability, performance and durability. With a Magpul® Gen III self leveling follower, four way anti-tilt design and 17-7 PH stainless steel spring, this 6061-T6 aluminum magazine box is black Teflon® coated inside and outside. A Windham Weaponry Logo stamped base plate is removable for cleaning. Made in USA.

Due to state regulations this magazine cannot be shipped to California, District of Columbia, Maryland, Massachusetts, New Jersey, New York or Hawaii.

This molded lightweight polymer unit joins two magazines together to increase ammunition capacity. It saves reloading time, and won't scratch or deform magazines. Magazines are held securely by two tightening screws in the center of the unit. Made in the U.S.A by Mission First Tactical.

Blackhawk Telestock Magazine Pouch - $24.95Part# MAGPOUCH-TELE-BH-BLK

A high quality Magazine Pouch that is designed to strap onto the Telestock of the M4 type Carbine, this Blackhawk Buttstock Mag Pouch features an adjustable closure flap to accomodate 20 or 30 Round magazines. Sewn of heavy, 1000 denier abrasion resistant nylon and webbing, its dimensions are 3”W x 4 1/8”H x 1”D.

(The magazine shown in the photo is not included.)

While Windham Weaponry 10 Rd. Magazines and 5 Rd. Magazines are similar in appearance, they still have all the reliability, performance and durability of their higher capacity brothers. Magpul® Gen III self leveling followers - 17-7 PH stainless steel springs - 6061-T6 aluminum boxes with black Teflon® coating inside and out, and the Windham Weaponry Logo stamped on a removable base plate for easy cleaning. Made in USA.

(Magazines shown are not included.)

2525

Buttstocks & Buttstock PartsButtstocks & Buttstock Parts

(A)

(B)

(C) (D)

Wound from high tensile strength spring steel, the Carbine Length Buffer Spring is sized to fit within any M4 type carbine length buffer tube. It provides the resilience to push the Buffer and Bolt Carrier forward in the action cycle while at the same time dampening the recoil.

Machined steel with a black phosphate finish. Tighten with Armorer’s Wrench to avoid damage. See Gunsmithing Section in this catalog.

Slows the cycle rate in the AR15/M16 for improved reliability and reduced recoil. H-Buffer (marked H on the end) weighs 3.76 oz.

Stamped steel plate correctly positions Telestock and prevents any rotation as the stock is mounted onto the Lower Receiver. Stamped & machined steel with a black phosphate finish, for all AR15 or M16s.

A replacement endplate for standard telestocks offering solid mounting points on either left or right side of the carbine for single point or other slings. Made of stamped steel with black manganese phosphate finish.

Complete 6 Position Telestock Kit for AR15/M16$69.95 - Part# KIT-TELESTK

Nonadjustable Tele-Style Stock Kit for use in Statesof NY, NJ, CT, MA - $69.95 - Part# KIT-TELESTK-FIXED

This A2 solid stock with storage compartment is great for building a varmint rifle or replacing a telestock. Includes a rifle length stainless steel action spring, a standard buffer, the A2 standard receiver extension, an A2 stock spacer and screw, and "trapdoor” stock with serrated buttplate and sling loop.

A2 Solid Buttstock for AR15/M16 - $64.95

Part# STK-STDKIT

A carbine length version of the Ace Skeleton Stock. A rugged aluminum and tubular steel frame mounts to the CAR length aluminum receiver extension and a high density neoprene foam tube slips over the black anodized receiver extension to offer a comfortable check weld for left or right handed shooters. Includes molded rubber buttpad, sling swivel (mounts forward ambidextrously or at the bottom of the buttplate frame), quality CAR Buffer and Buffer Spring. Complete with kit assembly instructions - Made in U.S.A.

Comfortable and lightweight, this rifle length stock kit will replace your telestock or standard stock and includes all necessary parts from the receiver back. A neoprene sleeve offers a great cheekweld for left or right handed shooter, and the sling swivel can be mounted forward on either side, or at the bottom of the buttplate frame. A molded rubber buttplate absorbs recoil and won’t slip on your shoulder.

CAR Skeleton Stock Kit for AR15/M16$119.95 - Part# STK-SKELKIT-CAR

Rifle Length Skeleton Stock Kit for AR15/M16$119.95 - Part# STK-SKELKIT

Makes the telestocked Carbine more comfortable and "non-slip” at the same time. This molded rubber buttpad is designed to fit most 6 position telestocks with a simple slip-on fit. Black rubber, made in the U.S.A.

Rubber Telestock Buttpad$9.95 - Part# BUTTPAD-6POS

CAR Length Buffer Spring Only (A) - $3.95 - Part# 9390022

Telestock Locking Nut Only (C) - $5.95 - Part# 9390020

Carbine Buffer Only (B) - $12.95 - Part# 1005-914-4578Heavy Carbine Buffer - $24.95 - Part# 8448730B-M

Telestock Plate Only (D) $4.95 - Part# 9390021

Ambidextrous Telestock Endplate for AR15/M16 - $9.95 - Part# ENDPL-AMBI

This high quality Telestock Kit includes the Stock with molded-in W-W logo and Locking Latch, 6 Position Receiver Extension, the Locking Nut and Positioning Plate, Rear Sling Loop, high tensile strength Action Spring, and standard CAR Buffer with aluminum body and solid weights.

This kit contains all the “Telestock” parts in a Fixed Length version to comply with regulations in NY, NJ, CT & MA. It installs just like a regular telestock. Includes the Receiver Extension, Locking Nut and Receiver End-plate, Rear Sling Loop, a stainless steel Action Spring, and a CAR Buffer with aluminum body and solid weights.

2.96 oz.

26

Buttstocks & Buttstock PartsButtstocks & Buttstock Parts

Pistol Grips / Forends & PartsPistol Grips / Forends & Parts

This comfortable, ambidextrous, ergonomically designed replacement grip for the AR15/M16 features smooth finger groves, an upper rear extension that supports the web of your hand, and a superior textured finish that minimizes slip with either bare or gloved hands. The Suregrip has an overmolded rubber surface to offer a little "give”. An interior storage compartment offers space for small parts or tools, and is sealed with a molded rubber grip plug. A bonus feature is the Ergo "Gapper” - included to fill the gap between the receiver (at the rear of the trigger guard) and the grip to offer knuckle cushioning and a more finished look to your rifle. Installation utilizes your existing grip screw and washer. Made in the U.S.A.

The Magpul MOE (Magpul Original Equipment) Stock is part of their line of accessories designed to provide a high-quality, economical alternative to standard

weapon parts. The MOE line distinguishes itself with simplified features, but maintains Magpul’s engineering and material quality. The Magpul MOE Stock is a drop-in replacement

buttstock for AR15/M16 carbines using commercial-spec sized receiver extension tubes. Designed for light, fast action, the streamlined A-frame profile avoids snagging and shields the release latch to

prevent accidental activation. An extended 0.55" rubber butt-pad is included to provide positive shoulder purchase, and accommodates the longer, slanted back common to most commercial-spec tubes. Made in U.S.A.

Magpul MOEAdjustable Stock - $59.95 - Part# STK-MOE-BLK

The Mission First Tactical E-Volv (E2) Telestock Cheekpiece offers a solid cheekweld for either right or left-handed shooters, and includes two removable battery "sleds" (compartments). Mounting components feature a Sling Slot, and QD Sling Mounting Point, to allow attachment of various tactical slings. Also included are 2 sets of screws and an Allen Wrench for installation. Molded of lightweight polymer - made in the U.S.A. Faded telestock image shows cheekpiece as mounted (telestock is not included).

Mission First E-Volv (E2) Telestock Cheekpiece$29.95 - Part# STK-CKPIECE-MFT

ERGO SureGrip for AR15/M16 - $26.95 - Part# 9349127-ERGO-AMBI

With it’s unique "palm shelf”, this comfortable, ambidextrous grip offers smooth finger groves and a heavier tactical design with rear upper hand web support. Its highly textured finish minimizes slippage for bare or gloved hands and the palm shelf (adjustable for height) stabilizes your grip for improved trigger pull, rifle control and accuracy. The Tactical Deluxe grip is molded of material that is virtually impervious to oils and solvents - made in the U.S.A.

ERGO Tactical Deluxe Pistol Grip - $59.95 - Part# 9349127-ERGO-TAC

See Page 23 for StandardA2 Pistol Grip Kit & Parts

Mission First Tactical’s BULS - Battlelink™ Telestocks offer features that will make your old tele obsolete. Its a slide-on replacement for any commercial buffer tube (1.168” diam.), and offers quick target acquisition, reduced operator strain and accurate shot placement. Its angled rubber buttpad makes for quick shouldering of the weapon - even with body armor on. Two quick detach sling mounting points afford flexible attachment of any type of sling. The buttpad flips down to open a waterproof battery / small parts compartment fitted with customizable quiet foam storage block with a quick access tab. The BULS stock is molded from reinforced, super tough polyamide from DuPont's Military Plastic Division. Made in U.S.A. by Mission First Tactical.

Mission First BULS Telestock for AR15/M16 - $109.95 - Part# STK-BULS-BLK

The Mission First Tactical BUS - Battlelink™ Stock is the next evolution of the battlefield telestock. Molded of reinforced polyamide from DuPont's Military Plastic Division, it fits all standard commercial (1.168” diam.) buffer tubes. Features include a flip-down, waterproof buttpad storage compartment for batteries and small parts in a customizable foam storage block with a quick access tab. It accepts any type of sling configuration, and will mount custom accessories like a GPS unit. This stock reduces operator strain and fatigue, increases effectiveness, target acquisition and accurate shot placement. The angled non-slip buttpad allows faster presentation with body armor on, and two quick detach sling mounting points are positioned for flexible sling mounting. Made in the U.S.A.

Mission First BUS Telestock for AR15/M16 - $109.95 - Part# STK-BUS-BLK

MFT BULS Stock storage compartment open.

MFT BUS Stock storage compartment open.

2727


With a palm swell, finger grooves and soft rubber molded over a durable fiberglass core, the Hogue Overmolded Pistol Grip improves the comfort of your AR15 like no other accessory grip. Its an easy

replacement for the standard grip, and the unique texture ensures a solid, non-slip grip under any conditions.

Hogue Overmolded Pistol Grip - $23.95 - Part# 9349127-HOGUE

CAR Double Heatshield M4 Type Handguard$19.95 - Part# DS4-HANDGUARD

Magpul MOE CAR LengthHandguard Set for AR15/M16$29.95 - HGD-MOE-CAR-BLK

Windham Weaponry Tubular Aluminum Free-Float Forends for AR15/M16Rifle - $74.95 - Part# HGD-ASTD-ACarbine - $64.95 - Part# HGD-ACAR-A

Diamondhead 2-Piece Aluminum CAR Handguard - $109.00 - Part# HGD-DH-CAR-2PC

Tactile comfort, and durability in a quality economical, easily installed upgrade for the standard AR15/M16/M4 pistol grip - the ergonomic design combines aggressive texturing with storage core capability. Rugged one-piece reinforced polymer construction provides durability, and the MOE Grip accepts optional storage cores for gear stowage. A basic grip cap is included as well as all mounting hardware. Made in the USA by Magpul.

Magpul MOE Pistol Grip for AR15/M16 - $20.95 - Part# 9349127-MOE-BLK

These are the heavy duty, oval shaped M4 Carbine type

Handguards, featuring dual aluminum heatshields, and are molded of heavy black plastic. The mirror image design allows either piece to be fitted - top or bottom - on the rifle.

Fits any Carbine barrelled AR15/M16. Installs into front handguard cap and rear delta ring. Light weight (6.85 oz.), with slots at 2, 6, and 10 o'clock positions to attach optional

Picatinny rail sections, and other accessories for mounting tactical lights, slings, grips, etc. Relieved area at the top rear accommodates many overhanging optic mounts. Reinforced, heat-resistant polymer

construction with integral aluminum heat shield for durability without the weight of an aluminum rail hand guard. Front extensions and lip protects operator from hot front sight burns. This set is compatible with most piston-driven gas systems.

These superbly machined, ultralight forend assemblies add a custom look and a comfortable grip to rifle or carbine. 6061 Aluminum tube is knurled and grooved for a solid grip, and slotted vents all around dissipate barrel heat. The tube threads onto the supplied barrel nut which turns onto the Upper Receiver and is drilled for the gas tube. A rear knurled locking ring allows for final tube rotation so the supplied sling swivel/bipod stud will be correctly positioned. All parts are finished in hard black anodize. Rifle weight is 13 oz. / length: 12.5”. CAR weight is 8 oz. / length: 7 1/8”.

Diamondhead’s V-RS Modular Drop-In Handguard platform offers forend versatility for the M4 with almost limitless accessory configuration. The 2 piece design splits horizontally - mounts to delta ring and handguard cap like standard handguards. Add more side rails as additional accessories are needed (see Diamondhead Rails below). Diamond shaped vents (proprietary to this Windham Weaponry version) cool the barrel under rapid fire. The full length upper rail is in Mil. Std. 1913 Picatinny rail dimensions. Construction is durable Type III anodized 6061 T6 aluminum, and it fits all M4/AR15/M16 variants. Made in the U.S.A.

Mission First Tactical 2-Piece Picatinny Rail Handguard Set$124.95 - Part# HGD-MFT-CAR-2PC

Diamondhead Accessory Rail Segments...9” - $26.00 - Part# HGD-DH-RAIL-97” - $22.00 - Part# HGD-DH-RAIL-72” - $15.00 - Part# HGD-DH-RAIL-2

Fit Diamondhead’s V-RS Modular Drop-In Handguard above or the V-RS Free-Float Forend (next page). Mil. Std. 1913 Picatinny rail dimensions - anodized Mil. Spec. Type III 6061 T6 aluminum. Hex head screws included.

The MFT Engage Pistol Grip provides ergonomic comfort for any hand with a set of 6 panels for front and rear that vary the number of finger swells and the thickness of the backstrap for a custom fit. The grip core includes a watertight storage compartment with foam storage block to diminish parts rattle. Molded extensions cover that uncomfortable “receiver gap”. Made in the USA, and designed for the M16/M4/AR15/HK416. Manufactured by Mission First Tactical with lifetime warranty.

Mission First Tactical Engage™ Pistol Grip - $34.95Part# 9349127-MFT-ENGAGE

y e.

This 6061 aluminum AR-15 Carbine Integrated Rail Forend System is a drop in, screwless installation - fits the standard delta ring and handguard cap. Four Picatinny Rails provide a secure platform for mounting any accessories. A continuous top rail eliminates the gap between the receiver and rail. Overall length is 7 inches. Finished in hard coat anodize. As this set fits tight, we recommend our handguard removal/installation tool to help with installation (available on our website - Part #HGD-TOOL). Made in the USA, with a Lifetime Warranty from Mission First Tactical.

28

The Diamondhead V-RS Free-Floating Rifle Forend is designed to give a factory installed appearance to your rifle. It requires removal of both delta ring and factory barrel nut and replacement of the front sight with a low profile gas block. The V-RS kit includes a proprietary replacement barrel nut that allows for easy installation, and elimination of barrel nut timing issues. Multiple diamond shaped vents (proprietary to this Windham Weaponry version) keep your barrel cool. It is pre-dilled and tapped for Diamondhead’s accessory rail segments (see below) when you want to add additional accessories, lights, etc. Length: 10.5”, machined from Mil. Spec. Type III anodized 6061 T6 aluminum. Made in the U.S.A.


Magpul Angled Vertical Foregrip - $34.95 - Part# VGRIP-AFG-BLK

Protect, cover and smooth Picatinny rails with these molded black plastic rail covers. Low profile design makes rifle handling comfortable while protecting the critical rail profile. Reduces snagging on clothing and gear. Can be trimmed to fit around mounted accessories, lights or grips. Sold individually - the 2” long cover (A) fits over 7 slots; the 7” long cover (B) fits over 18 slots.

2.2” long Picatinny rail segment attaches to 6 or 7 vent hole handguards without modifications. (mounting screws through two vent holes) to add a mounting point for a vertical grip, flashlight or other accessory. Molded of rugged plastic, it’s slight wedge shape aligns the rail surface perfectly with the barrel/bore.

Mounts the Harris Bipod to standard AR15/M16 handguards through the hole in handguard. Includes rectangular interior plate, exterior washer, a threaded QD stud and QD Sling Swivel. Manganese phosphated steel - made in U.S.A.

The EOTech EXPS2 Holographic Weapon Sight is their shortest model sight yet. Smaller and lighter than other HWS sights, it runs on a single 123 battery to reduce sight length. The single battery configuration requires only 2 3/4” rail space leaving more room for rear iron sights, magnifiers or Night Vision. The Battery Cap with improved O-ring is tethered to the sight body to avoid loss. Average battery life at brightness level 12 is roughly 600 hours. Made in the U.S.A. Optics: Transmission holography - parallax free / Magnification: 1x / Eye Relief: Unlimited / Length/Width/Height: 3.5"x2.4"x2.8" (91.4x60.9x71mm) / Weight: 11.2 oz (317grams) / Temperature: -40° to 150° F / Waterproof to 10 ft depth / Fogproof internal optics / Adjustment (per click): 0.5 MOA (1/2" at 100 yds). See www.windhamweaponry.com for complete details

ERGO 7 Slot and 18 Slot Low Profile Picatinny Rail Covers...

ERGO 7 Slot Rail Cover - $4.95 - Part# HGD-RAILCOVER-LADDER-2ERGO 18 Slot Rail Cover - $8.50 - Part# HGD-RAILCOVER-LADDER-7

Mission First Tactical EvolV™ 2.2” Picatinny Rail - $9.95 - Part# HGD-MFT-RAIL-2

(A)

(B)

Sights & OpticsSights & Optics See Barrel Parts - Page 21 - forStandard A2 Front Sight Parts

Mission First React Short Foregrip for AR15/M16$24.95 - Part# VGRIP-MFT-SHORT

Fits any AR15/M16 Picatinny Rail to offer a non-slip grip. Helps stabilize your rifle in rapid fire and offers faster target acquisition. It features a water tight, battery or small parts storage compartment with customizable foam storage block to reduce rattle of contents. Storage compartment door has a flat, non-slip bottom which aids in supported firing positions.

Weight: 2 ounces / Height: 3.9” Made in the U.S.A.

Fits Picatinny railed handguards as a traditional vertical grip, but is also optimized for the "thumb break method" of shooting taught by Magpul Dynamics. Includes mounting hardware plus a universal mounting rail segment for custom fitting to many factory plastic hand guards. Durable reinforced polymer plastic with an aggressive textured surface for positive weapon control.

Magpul RVG Forend Grip for Picatinny Rails$24.95 - Part# VGRIP-RVG-BLK

Diamondhead V-RS Free-Floating Rifle Forend - $159.00 - Part# HGD-DH-FF-10

Harris #5 BiPod Adapter - $13.50Part# BIPOD-ADAPT-HB5

BiPod Stud & Spacer Kit - $2.95 - Part# KIT-BIPODSTUD

EoTech EXPS2 Holographic Sight for AR15/M16 - $559.00 - Part# EOT-EXPS2-0

Easily mount a BiPod or Quick Detach Sling Swivel to various accessory handguards. Machined steel with Black Manganese Phosphate finish. Stud is threaded 10/32.

Quick DetachSling Swivel - $8.00 - Part# SLINGSWIVEL-14

A quality Quick Detach Sling Swivel offering quick sling removal for bench shooting or cleaning/maintenance. Machined steel with spring loaded release screw, 1 1/4” wide sling loop, designed to attach to our BiPod Stud or other similar studs.

Compatible with most 1913 Picatinny-railed hand guards, the Magpul AFG (Angled Fore-Grip) uses natural body mechanics to provide a comfortable, stable user interface reducing fatigue and allowing precise weapon control. Positions shooter's hand high on bore centerline to reduce recoil and facilitate faster, more accurate follow-up shots.

Yankee Hill BiPod Adapter for AR15/M16 - $33.95 - Part# BIPOD-ADAPTER-YHMAttaches to any Picatinny type rail to accept most bipods. Machined aluminum with 7/64ths Allen

Head Screws - black anodized finish hardcoated to Mil Spec - with steel bipod mounting stud.

29 29

Sights & OpticsSights & Optics

Shorter and lighter than previous models, the EoTech G33 Magnifier offers a new and improved mount for faster transitioning from 3x to 1x, tool free azimuth adjustment, larger field of view and an adjustable diopter for improved, more precise focusing. It offers split-second

transitioning from CQB to medium range targeting with superior light transmission, large field of view, and more eye relief with windage and elevation adjustments that can be manipulated by

hand without any tools. The new slap to side mount is incredibly durable and operates with the slap of your hand, knocking the mount to the side. The G33 also offers a locking, quick detach lever for easy attachment and removal of both the optic and the mount. This magnifier aligns perfectly with standard height sights and comes with a 7mm riser to accommodate the 7mm raised sights. Made by EoTech in the U.S.A.

The EOTech 517 A65 includes buttons that allow easy brightness adjustments on the left side for instant access, allowing a magnifier or a back up iron sight to fit closely to the sight body when a magnifier is mounted behind it. It uses standard AA 1.5v batteries (included) as a power source. In addition it has a cantilevered base that allows one to mount a part of the Holographic Sight over standard hand guards of an M4 Rifle or an AR15/M16 Rifle. Made in the U.S.A.

EoTech G33.STS 3X Magnifier for AR15/M16 - $589.00 - Part# EOT-3XMAGNIFIER

EoTech Model 517 Holographic Sight - $485.00 - Part# EOT-517-A65

This is a low profile, rail mounted, fold down front sight that can be mounted to picatinny rail type gas blocks when the rifle has a "same plane” sighting system. Its unique design ensures constant in-battery action and repeat zero, and its low profile allows an unobstructed sighting view when using optics. A spring loaded quick release lever prevents the sight from being accidentally engaged, but is quick to release even with gloves/mittens. Utilizes a standard M4 / AR-15 front sight post and accepts most aftermarket sight posts. A small stainless steel security cable prevents loss of the rail locking screw. Made by A.R.M.S. in the USA.

A.R.M.S.® #40L Front Flip Up Sight - $99.00 - Part# ARMS40L-FRONT

A quality companion to the #40L Front Sight above offering lower profile (folded height .610"), clearance for mounting optics, and "same plane” design. It has .75 MOA click point of impact shift, a unique spring loaded design to ensure constant battery action and repeat zero. A quick release lever prevents the sight from being accidentally engaged, but it can be deployed with gloves or mittens. When released into battery, the 250-300 meter aperture is ready for immediate close combat use. The initial elevation zero utilizes the standard M16/M4 front sight bead. For longer ranges the leaf sight aperture is rotated to access the 500-600 capability with a built in horizon line to help lead distant targets. A stainless steel security cable prevents loss of the rail locking screw.

A.R.M.S.® #40L Rear Flip Up Sight - $119.00 - Part# ARMS40L-REAR

This sight’s unique diamond-shaped housing frames and centers the target - especially when integrated with its companion Rear Sight (below). It flips up quickly for rapid deployment, and folds down at the push of a button. This sight will stay up securely and remains zeroed in combat situations, and its elevation adjustments are secure and accurate. Easily installed on Picatinny Rail Gas Blocks. A standard A2 Front Sight post is included, and construction is Mil. Spec. Stainless Steel and Type 111 black anodized 6061 T6 Aircraft Aluminum.

Diamondhead Front Flip Sight for AR15/M16 - $109.00 - Part# DH-FRONTFLIP

A premium back up iron sight, the Diamondhead Rear’s detent button locks the sight in a deployed position and folds down with the push of a button. Its unique diamond-shaped aperture places the front post perfectly in the rear aperture’s center. Short and long range apertures are on the same plane, and same height as factory A2 sights (note: if using this sight with an A2 standard front sight base, an .040” taller sight post will be required). Windage adjustments are 0.5 MoA accurate, small or large aperture can be active in either deployed or stowed mode. Folded height is a compact 0.435”. Construction is Mil. Spec. Stainless Steel and Type 111 black anodized 6061 T6 aircraft aluminum. Made in the U.S.A.

Diamondhead Rear Flip Sight for AR15/M16 - $129.00 - Part# RS-10001

This economical yet precision Polymer Flip Up Front Sight fits all AR15/M16s with a Picatinny Rail Gas Block. Of durable, metal-reinforced polymer construction, it is adjustable for elevation with its Steel Front Sight Post. Height is .600" from the top of the rail when folded down. A spring loaded mechanism deploys the sight quickly when its forward locking latch is depressed.

A.R.M.S.® #71 Front Flip Up Polymer Sight - $37.00 - Part# ARMS71-FRONT

The ARMS #71 Flip Up Rear Sight fits all AR15/M16 rifles with a "flat-top” Picatinny Rail Upper Receiver. Its durable, metal-reinforced polymer construction offers both economy and precision. Height is .600" from the top of the rail when in folded position. A spring loaded mechanism deploys the sight quickly when its forward locking latch is depressed, and the #71-Rear features the same windage adjustable metal dual apertures utilized in the A.R.M.S. #40L sight above.

A.R.M.S.® #71 Rear Flip Up Polymer Sight - $54.00 - Part# ARMS71-Rear

A1/A2 Sight Adjustment Tool - $6.95 - Part# SIGHTTOOL-A1-A2A.R.M.S. #71L Front & Rear Sight Combination - $89.00 - Part# ARMS71L F/R

Essential in your AR15 range bag, it adjusts height of both "5 notch” A1 and "4 notch” A2 Front Sight Posts - even the flip-up sights with taller "ears” on either side of the sight post.

30

Gunsmithing / AccessoriesGunsmithing / Accessories

The rugged Blackhawk 1 Point Storm Sling is made from high-quality 1.25” nylon webbing, adjusts 46” to 64” (diam.) with a tri-glide buckle to fit all body sizes or over bulky tactical gear. Single-point attachment design makes it ambidextrously functional and user friendly. An elliptical bungee segment provides comfort and support, and offers 4” of flex for weapon agility and CQB tactics. The bungee section is encased in compressed tubular nylon sheathing to limit bounce and enhance retention, and the elastic-encased mash clip provides quiet single-point weapon attachment. Made in the USA.

A quality sling - we include one with every gun we sell. Heavy 1 1/4" width black nylon webbing, two black phosphate finished steel buckles - overall length 52".

This .22 LR Conversion System comes completely assembled and ready to install in any AR15/M16. No gunsmithing or rifle alterations required - it uses your factory upper receiver, barrel, fire control system, buffer and spring. Just replace the bolt and carrier with the CMMG conversion unit, closing the receivers, and load up the included magazine with high-velocity round-nose .22 LR ammo. Test fired to ensure correct function, precision machined from high-grade stainless steel and brass for proper fit in any mil. spec. .223 / 5.56mm rifle or carbine. One gray polycarbonate 25 round magazine is included - features self-lubricating anti-tilt follower and constant-force spring to help ensure reliable feeding. Made by CMMG in the USA.

Due to state regulations this magazine cannot be shipped to CA, District of Columbia, MD, MA, NJ, NY, Hawaii.

CMMG .22 LR Conversion Kit for AR15/M16$219.95 - Part# KIT-22LR-CONV

Harris bipods quickly attach and detach on a variety of rifles. They mount to a quick detach sling swivel stud (see Page 28) and offer adjustable height legs. The legs extend by spring action, height settings are adjustable from 9 to 13” (adjustment height range is from resting surface to center of bore), notches on the legs help with leveling. Legs fold out of the way when not in use. Constructed of aluminum and high carbon steel, anodized black finish. Made in USA.

Harris Adjustable BiPod$119.95 - Part# BIPOD-S-LM

Blackhawk 1 Point Storm Sling$32.95 - Part# SLING-BH1PT-BK

Extra CMMG .22 LR Conv. Kit Magazines$19.95 - Part# 22LR-CONV-MAGBlack Web Sling - $4.95 - Part# 12624561

Bright yellow, high strength composite plastic, this handy tool shows the rifle is unloaded when inserted in the chamber, it can

be used as push pin tool for pivot and take down pins, and it’s also a magazine unloading tool.

A necessity for any AR style rifle shooter or agency armorer, this tool eases removal of standard handguards on M4 carbines, mid length and rifle length AR15 rifles by applying even pressure on the delta ring. One piece construction, the tool is completely covered with protective plastic to prevent damage to the rifle finishs of your rifle. The hooked end locks into the mag well, and as you squeeze the two lever handles, even downward pressure compresses the delta ring to allow the handguard halves to pop off. Made in U.S.A.

Chamber Plug/Multi-Tool for AR15/M16$7.50 - Part# CP-02

Handguard Removal Tool for AR15/M16$15.95 - Part# HGD-TOOL

Wipe-Out Patch-Out Brushless Bore Cleaner$13.95 - Part# CLEANER-PATCH-OUT

Tetra ValuPro Gun Cleaning Kit$17.95 - Part# CLEANKIT-TETRA

This kit offers the highest quality and versatility all in an attractive, compact plastic case - everything the shooter needs to maintain, clean and lubricate a firearm. Includes Tetra Gun Grease (10g), 2 oz. Triple Action (cleaner - lubricant - protectant), .223 cal. bronze bore brush, cotton patches, patch holder, cleaning rod, and extension pieces.

Tetra Gun Cleaning Pack - $19.95Part# GUNCLEANINGPACK

Tetra’s "4 in 1” Gun Cleaning Pack cleans, lubricates and protects your firearms with a complete chemical cleaning set for the true firearm enthusiast. Contains: 3.75 oz. Tetra Spray Lubricant, 1 oz. Tetra Lubricant, 1 oz. Tetra Gun Grease, 4 oz. Copper Solvent, and a Tetra "Gun Cleaning Made Easy" DVD.

This effective product has impressed us. Heavily fouled barrels come clean in a very short time - with no destructive brushing and no pitting. It will dissolve brass, bronze, and copper, and will degrade lead so it can be pushed out with a patch. It cannot cause rust, will not gum or form solids, and is safe for all barrel steels - carbon and stainless. 8 Fluid ounces - made in the U.S.A.

Wipe-Out Tactical Advantage Bore Cleaner$15.95 - Part# CLEANER-TACADV

Designed for the tactical shooter, this very "carbon aggressive” bore cleaner removes copper and powder fouling with a minimum of effort. It dissolves carbon on contact, is easy to use, less messy, and odorless. It protects all metal parts against corrosion and rust and is safe for all steels and all metal plating (including chrome lined barrels). 8 fluid ounces - made in the U.S.A.

Our gunsmith discovered this great mat and has used one ever since. 54” x 16” Industrial Grade PVC Membrane with two magnetic strips to hold springs, detents and small parts in place while you work. Withstand solvents and bore cleaners and will not absorb chemicals. Custom screen printed with a gold Windham

Weaponry logo. From Armor Industrial Products - U.S.A.

WW Magnetic Gun Cleaning Mat - $23.95Part# CLEANINGMAT

31

W-W .223/5.56mm Bore Brush - $1.95Part# BRUSH-BORE-223

Dewey Military Thread Adapter - $3.95Part# CLEANINGROD-ADAPT

Dewey 30” Barrel Cleaning Rod$28.95 - Part# CLEANINGROD-30Dewey Chamber Cleaning Rod with Brush$15.95 - Part# CLEANINGROD-CHAMBER

A top quality Bore Brush for .223/5.56mm caliber barrels. Finest phosphor bronze bristles, threaded 8/32 to fit most commercial .22 cal. cleaning rods.

An indispensable visual guide to our WW-15 Rifle, every part of the rifle is printed in full color on heavy stock, laminated for counter top protection, with a non-skid foam backing. 18” x 12” size - makes a great gift.

As an aid to achieving all the accuracy built in to your rifle, these well designed Zeroing-In Targets have a center mass target as well as 4 individual zeroing

targets with instructions for front & rear sight adjustment. Ten 14” x 20”

targets printed black on non-glare tan stock in a waterproof poly bag.

This little brass piece from Dewey is the necessary link to connect 8/32 thread .22 Cal. Rods to 8/36 thread military style brushes. Machined from solid brass, and made in the USA.

An essential tool for the armorer or AR Carbine owner,

this dual function steel Telestock Wrench fits the castellated nut that locks the Telestock to the Receiver. It includes a cutout that fits the end of the receiver extension tube. The handle is plastic dip coated for comfort. Machined from black manganese phosphate coated steel - made in the U.S.A.

Gunsmithing / Accessories / ApparelGunsmithing / Accessories / Apparel

Dewey Rods are famous throughout the shooting world for their quality and durability. For all .22 / .223 / 5.56mm barrels, the 30”

rod is nylon coated to protect rifling and has a heavy plastic handle with internal ball bearings to allow the rod to track the rifling in the bore as you clean. Included with the 30“ rod is an 8/32 male to female thread adapter and a jag.

The Dewey Chamber Cleaning Rod is specifically for the AR15/M16 platform rifle and includes a .223 / 5.56mm chamber brush. The 16” heavy brass rod and handle are long enough to easily reach the chamber through the rear of the receiver.

W-W .223 / 5.56mm Chamber Brush - $4.50Part# BRUSH-CHAMBER-223

Telestock Wrench for AR15/M16 - $8.95Part# WRENCH-TELE

Windham Weaponry 25 MeterZeroing-In Targets - 10 Pack

$3.95 - Part# KIT-TARGET

A Mil. Spec quality Chamber Brush - threaded 8-32 to fit standard rods. Bronze bristles scrub out the chamber while the longer, stainless steel tufts clean the locking lug recesses - all necessary to help preserve the accuracy of your AR rifle.

W-W "Visual Guide” Countermat - $9.95Part# ACC-COUNTERMAT

Display your brand loyalty for the finest AR15 type rifle made with this Windham Weaponry adhesive logo sticker. Apply it to car/truck bumpers, tool boxes or any smooth surface. Printed in bright blue & gold on white adhesive vinyl, it measures - 6” x 2.5” in size. Show your Windham Weaponry allegiance.

W-W Logo Sticker$1.95 - Part# ACC-DECAL

Windham Weaponry Royal Blue Hat - $14.95Part# ACC-BCAP-ROYBL

The Windham Weaponry Blue Polo ShirtMen’s & Women's Sizes - $28.95

Windham WeaponryDuck Brown HatHat - $19.95Part# ACC-BCAP-BRWN

This high quality blue Windham Weaponry Polo Shirt is at home on the range or anywhere you roll. The Windham Weaponry script logo is embroidered in gold on comfortable "silk touch” royal blue knit fabric - a 5 oz., 65/35 poly/cotton pique - very lightweight and silky soft with minimal shrinkage. They feature flat knit collar and cuffs; metal buttons with dyed-to-match plastic rims; double-needle armhole seams and hem. Adult Sizes: S through XXXXL. Women’s sizes are tailored appropriately.

The Windham Weaponry Duck Brown Hat is for active outdoor people. It’s sewn in a low profile design from lightweight cotton fabric to keep you cool and comfortable. One size fits all with an adjustable Velcro back-strap. Windham Weaponry logo is embroidered in gold on the front.

W-W “Static-Cling” Logo Sticker - $1.95Part# ACC-WINDOWDECAL Same logo image as abovereverse printed on clear static-cling vinyl for use on windows.

A lighter weight material cap for warm weather use, Windham

Weaponry's Royal Blue Hat keeps you cool and looks sharp with

its gold embroidered Windham Weaponry logo. 100% Cotton

construction with an adjustable Velcro back-strap

(one size fits all).

MEN’S PART NUMBERS:Small: ACC-POLO-M-SMedium: ACC-POLO-M-MLarge: ACC-POLO-M-LXLg.: ACC-POLO-M-XLXXLg.: ACC-POLO-M-XXLXXXLg.: ACC-POLO-M-XXXL For XXXL sizes, add $2.00XXXXLg.: ACC-POLO-M-XXXXL For XXXXL sizes, add $4.00

WOMEN’S PART NUMBERS:Small: ACC-POLO-W-SMedium: ACC-POLO-W-MLarge: ACC-POLO-W-LXLg.: ACC-POLO-W-XLXXLg.: ACC-POLO-W-XXLXXXLg.: ACC-POLO-W-XXXL For XXXL sizes, add $2.00XXXXLg.: ACC-POLO-W-XXXXL For XXXXL sizes, add $4.00

32

ApparelApparel

Ordering Instructions / Returns / ShippingOrdering Instructions / Returns / Shipping

Keeping warm at the range or the game with this high quality Windham Weaponry Blue & Gold "Hoodie” Sweat Shirt. The W-W classic script logo is embroidered in gold on the left breast of this royal blue sweatshirt. Nine oz. 60/40 ring spun, combed cotton/poly soft fleece is sewn in a full athletic cut for easy movement. It features gold accents on the shoulders, on the half rib knit / half fabric cuffs and on the rib knit waistband. The neck is twill taped, and the sleeves are raglan cut. A front pouch pocket offers convenient storage and handwarming.

“UNISEX” SIZES S-4XL PART NUMBERS:

Small: ACC-HOODIE-SMed.: ACC-HOODIE-MLarge: ACC-HOODIE-LXLg.: ACC-HOODIE-XL

XXLg.: ACC-HOODIE-XXL For XXL sizes, add $2.00

XXXLg.: ACC-HOODIE-XXXL For XXXL sizes, add $5.00

XXXXLg.: ACC-HOODIE-XXXXL For XXXXL sizes, add $8.00

Payment: Windham Weaponry accepts Visa, Master Card and Discover. However, we regret that we are unable to accept international credit cards. The billing address you provide must be the cardholder's address. That is the address the bank has on record. It is also the address where your credit card billing statements are sent. If you do not accurately provide this information, your order could be delayed in processing. We will not process your credit card until your order is shipped.

We also accept US Postal money orders, Bank money orders, and personal checks. These orders will be held for 10 days to give time for the payment to clear.

Returns & Repairs: Windham Weaponry offers a 30-day money back guarantee on all parts and accessories. If you need to return a product, please be advised of the following policies.

• All items being returned for repair/upgrade/warranty work require a Return Merchandise Authorization number (RMA) which is provided by our Customer Service team toll free at 855‐808‐1888. Returns must be in new condition and within 30 days from original purchase date.

• After you receive your RMA, please fill out an RMA information form, and include it with your shipment. You can download this form at: http://www.windhamweaponry.com/rma.pdf

• A restocking fee of 15% will be charged for returns over 30 days. No restocking fee will be charged if the return is the result of a WW error.

• Please include in the package, a copy of the original invoice and the RMA number.• All damage claims due to shipping must be made directly to the carrier as soon as you receive your shipment.• All repairs must be sent shipping prepaid as COD's will not be accepted. Windham Weaponry strongly suggests that you

insure your return as most carriers will only cover up to $100 if no additional insurance is purchased. Please remove all accessories not required for repairing the item such as optics, lasers, flashlights, bipods, etc. If you are having an item installed that you purchased from Windham Weaponry, then the installation is free of charge.

Ship All Returns To:Windham Weaponry, Inc.999 Roosevelt TrailWindham, ME 04062

• If the repair is not covered by Warranty, then you will be called with an estimate of the gunsmithing charges plus return shipping for your approval prior to any work being done. Gunsmithing charges are $65.00/hour (min. 1 hour, and billed in 1/4 hour increments)

• We do not accept Class III returns or repair without prior notification and appropriate BATFE transfer paperwork.Shipping: FedEx is our preferred shipper. Some small packages may be shipped through FedEx's SmartPost program,

where FedEx delivers the package to your local Post Office and USPS will then deliver it to your PO Box or to your door. Shipping rates vary by State and dollar amount. See all Rate Charts at: www.windhamweaponry.com/shipping.asp

• If an order is partially shipped, then the balance of the order will be shipped with free shipping.• Orders will not be shipped COD.• Sales Tax will apply to all Maine Shipments unless we have a Tax Exempt Certificate on file.• We offer Free Shipping to all Maine addresses.• Certain items, such as lower receivers, lower assemblies and rifles will be shipped "Adult Signature Required".• In stock orders requesting expedited Next Day, Two Day Std, or Three Day Express Saver must be received no later than 2pm

Eastern Time or they will ship the next business day.• All Non Warranty RMA shipments will be charged $19.50 for return ground shipping which includes Adult Signature

Required. For Saturday Deliveries, please call Customer Service.

Sales Phone Number (Toll Free): 855-808-1888Phone Number: 207-893-2223Sales Fax Number: 207-893-1623E-mails to: [email protected]

Windham Weaponry Blue& Gold "Hoodie” SweatShirt for Men & Women

$44.95

Windham Weaponry “Camo” Hat$19.95 - Part# ACC-BCAP-CAMO

In the Advantage Timber camo pattern, this comfortable, low

profile hat features a gold embroidered Windham

Weaponry logo. Made in U.S.A.

NAME: ____________________________________________________________________ADDRESS: _________________________________________________________________CITY: _____________________________________________________________________STATE: ________________________________________________ ZIP: ________________TEL. #: ____________________________________________________________________________

PAYMENT: ❍ MASTERCARD ❍ VISA ❍ DISCOVER ❍ CHECK OR MONEY ORDER CREDIT CARD ACCOUNT #: ____________________________ EXPIRATION DATE: __________SIGNATURE: ________________________________________________________________

WINDHAM WEAPONRY, INC. • 999 Roosevelt Trail • P.O. Box 1900 • Windham, Maine 04062 U.S.A

Order FormOrder Form You can order on-line at: www.windhamweaponry.comor Telephone Orders are Toll Free at: 1-855-808-1888

Gunsmithing / Gift CertificatesGunsmithing / Gift Certificates

SUBTOTAL

Maine Residents Add 5% Sales Tax

Shipping, Handling & Insurance

TOTAL AMOUNT

QUANTITY PRICE AMOUNTPART # DESCRIPTION

Some parts and accessories should be installed by a qualified gunsmith. If you are purchasing these parts from us you should send the rifle (or upper or lower as necessary) for installation. We do not charge gunsmithing fees for installation of parts purchased from Windham Weaponry - and you can be assured the installation will be done correctly and safely.

Any rifle being returned for warranty repair work - once the weapon has been evaluated and approved for warranty repair - will be repaired free of charge. If the repair is not covered under warranty, you will be called with an estimate of the gunsmithing charges plus return shipping for your approval prior to any work being done. Gunsmithing charges are $65.00/hour (minimum one hour) and billed in 1/4 hour increments.

Please remove any optics or accessories not required in the repair to avoid damage in shipping before sending us any rifle.We will make repairs on AR15s of other manufacturers provided those firearms use mil spec parts that are interchangeable

with those used by Windham Weaponry. If the repair is for a functionality problem, the caliber must be .223/5.56mm NATO.Gift Certificates:Windham Weaponry now offers Gift Certificates in the amount of your choice. Order on-line or by calling 1-855-808-1888.

You can redeem them by mailing it in with an order, or by giving us the Gift Certificate Number on-line. Gift Certificates can not be used for complete rifle purchase (or part of a rifle purchase), as FFL regulations apply.

Basic Fed-Ex Shipping Rates. Priority/Overnight Services available at extra cost. Call 1-855-808-1888 or see www.windhamweaponry.com

$0.00 - $19.99 $ 6.50$20.00 - $49.99 $ 9.00$50.00 - $99.99 $12.00$100.00 - $249.99 $14.50$250.00 - $499.99 $18.00$500.00 and above $21.00

windham weaponry catalog 2013

Documents

black manganese phosphate

a2 flash suppressor

m4 feed ramps

hard black anodize

extended a2 birdcage

military plastic division

a2 flash hider

carbon fiber composite