wilson tool high performnace (hp) + standard thick-turret 2011 - sm tech
DESCRIPTION
Wilson Tool High Performnace (HP) + Standard Thick-Turret 2011 - SM TECH Tools for thick turret machinesTRANSCRIPT
WILSON HIGHPERFORMANCE™
ANDWILSON STANDARD
THICK TURRETTOOLING
PunchingMade Easy
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 11:59 Page 2
Terms and Conditions
UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Credit All orders are subject to the approval of our credit department. If you are a new account, pleasefurnish us with a bank reference and three supplier references. A credit limit will be imposed onnew accounts until credit has been established.
Payment Terms are net 30 days.
Cancellation In the event an order is cancelled, charge will be made to cover labour, materials and overheads.
Returned Material A handling charge of 25% is made on all standard parts returned for credit. Written permission andshipping instructions must be obtained before the return of any material. Special tooling cannot bereturned.
Claims All claims for shortages must be made within 3 days of the invoice date.
Prices Prices and specifications subject to change without prior notice. E & OE.All prices are exclusive of VAT.
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 11:59 Page 3
Table of Contents
UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
OptimaTM Coating 2UltimaTM Tool Steel 3Features and Benefits of HP Tooling 4Features and Benefits of Large Station HP Tooling – Quick Reference 5Features and Benefits of Wilson Standard Thick Turret – Quick-Adjust A & B Station Tooling 6Features and Benefits of Wilson Standard Thick Turret – C, D & E Station Tooling 7HP2 A Station 8HP A Station 9HP Heavy Duty A Station 10Wilson Quick Adjust A Station 11Wilson Standard A Station 12Wilson Heavy Duty A Station 13HP2 B Station 14HP B Station 15HP Heavy Duty B Station 16Wilson Quick Adjust B Station 17Wilson Standard B Station 18Wilson Heavy Duty B Station 19HP C Station 20Wilson Standard C Station 21HP D Station 22Wilson Standard D Station 23HP E Station 24Wilson Standard E Station 25Close to Clamps Tooling 26DuraDie 27DuraBlade 29HP DuraBlade D Station 30HP DuraBlade E Station 31Punch Shims, Die Shims & Slug Ejectors 32Non Standard Keying 33Shear Options 34Add ons 35Wilson Xtra Accessories Range 36Notes 37
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 11:59 Page 1
2 UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Optima Coating
The New Standard in Tooling Performance!
Optima™ is a proprietary TiCN (titanium carbo-nitride) coating that was custom engineered at our in-house coatingfacilities. It features unique properties that significantly enhance tooling performance. This coating, which is available only toWilson Tool customers, provides a level of surface hardness, wear resistance and lubricity never before associated withcoated or uncoated punch press tooling.
10,000,000
9,000,000
8,000,000
7,000,000
6,000,000
5,000,000
4,000,000
3,000,000
2,000,000
1,000,000
0
Numberofhits
Punch LifeNibbling 14ga. (1.9mm) 304 Stainless Steel
D2 M2TIN
Optima™
Using a 7.9mm Round Punch
The white area indicates actual results achievedthrough three tool sharpenings of 0.25mm each. Thecomplete graph indicates projected results with a
total of 6mm removed for sharpening.
Punch Life
51.61mm
45.16mm
38.7mm
32.25mm
25.8mm
19.35mm
12.9mm
6.45mm
0mm
Square mm of Material Adhesion(Galling) on Punch Tips
Nibbling 12ga. (2.1mm) Aluminium
D2 M2
TIN
Using a 6.3mm Square Punch (At 20,000 hits)
Material Adhesion
1,200,000
1,000,000
800,000
600,000
400,000
200,000
0
Numberofhits
Number of Hits Before First SharpeningNibbling 14ga. (1.9mm) 304 Stainless Steel
D2M2
TIN
Optima™
Using a 7.9mm Round Punch
Number of Hits
0.76mm
0.64mm
0.5mm
0.38mm
0.25mm
0.13mm
0mm
Punch Tip Corner WearNibbling 14ga. (1.9mm) 304 Stainless Steel
D2
M2
TIN
Using a 6.3mm Square Punch (At 25,000 hits)
Tip Wear
AmountofCornerWear
Some of the many benefitsthat you will enjoy with ourOptima™ coating include:
• Longer tool life
• Increased wear resistance
• More hits between sharpenings
• Reduced adhesion (galling)
• Reduced slug pulling
• Reduced corner breakdown
• Improved special tooling performance
• Lower overall tooling costs
• In-house coating facilities allow usto deliver faster and maintain totalquality control
TECHNOLOGY AT THE CUTTING EDGE
Technology for Increased Tool Life
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 11:59 Page 2
3UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Boost Punching Productivity!
Tool Steel for Longer LifeWhen faced with demanding applications that requirelong-term wear resistance and toughness, turn to Wilson’snew Ultima™ Premium Tool Steel for HP thick turret tooling.Ultima punches and dies are engineered to increase wearresistance by up to 100% over conventional tool steels.
A New Level of PerformanceUltima premium tool steel sets a new benchmark fordurability and performance. Ultima punches and dies aredesigned to dramatically improve tool life when punchingabrasive materials and materials with high tensile strength.
Ultima excels in applications in which punches and dies wearquickly and is ideal for long running tasks. The premium steelfrom which Ultima punches and dies are made significantlyreduces micro chipping on the cutting edge. This microchipping is most often where cutting edge failure begins.
Remarkable Downtime ReductionsWith up to twice as long between re-grinds, Ultima premiumsteel significantly reduces downtime and tool replacement costs.Breaking, chipping, cracking, tool fatigue and other downtimeproblems are minimised, providing long term gains inproductivity and profitability.
Ultima tools are especially useful for the toughest punch pressapplications, but are effective in any job. Viability can bedetermined by conducting a cost benefit analysis.
Maintenance and sharpening may differ from traditionaltooling. Please check with your local Sales Engineer or theSalesdesk.
Ultima Tool Steel
Technology for Increased Tool Life
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 11:59 Page 3
Features and Benefits of Tooling
4 UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
••
Double D key for longer wear
Click punch length adjustmenteliminating the need for shims
Pre-loaded spring pack assemblyallows easy punch removal
O-ring for easy guide removalwithout tools
•
B Station
Replaceable stripper plate
•
•
D Station••
•
Built-in oiling system
50% more bearing surfacereduces side loading
Pre-loaded spring pack assemblymaintains correct lengthadjustment
Push button punch lengthadjustment
Tapped for M-14 T-handle carryand extractor tool
•
Assembly can achieve angles of0°. 45°, 90°, 180°, 225° and 270°
•
•
Optima® coated key for superiorwear resistance
Push button lock release forquick stripper plate removal
Positive locking stripper plateretention
•
•
Standard Round Die Slug Hugger® 2 Die
•Negative taper
Positive taper•
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 11:59 Page 4
Features and Benefits of Large Station Tooling – Quick Reference
5UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
HP™ HP™ ABS HP™ WLS
Patent-pending push button length adjustment technology, sidemounted for easy access and quick in-machine adjustment
Quick release stripper plate retention makes changing tools fastand easy
Utilises existing Series 90® punches and stripper plates
Optima coated keys for superior wear resistance
Maximum available grind life
Up to 50% more bearing surface, reducing side loading
External keyways at 0°, 90°, and 225°
Achieves angles of 0°, 90°, 135°, 180°, 270° and 315°
Compatible with the Amada PDC system
Internal lubrication inside the punch guide
External lubrication between the guide and turret bore
External lubrication at the punch face (Note: requires AmadaABS machine)
• • •
• • •
• • •
• • •
• • •
• • •
• • •
• • •
• • •
• •
• •
•
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 11:59 Page 5
Features and Benefits of Wilson Standard Thick Turret Tooling
6 UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
• •
•
•
•
Fast shim-free adjustmentwithout removal from the guide
Revitalise your existing tools.Give old tools a new lease oflife!
Available for A and B Stations
Extremely tough punch headsand canisters treated with Nitrex
coating for greater strength,increased life and greater wear
resistance
Quick-Adjust A & B Stations
Increased grind life.Fully adjustable over 6.35mm to
maximise punch use
•
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 11:59 Page 6
Features and Benefits of Wilson Standard Thick Turret Tooling
7UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
•
••
•
Pre-loaded spring packassembly
Available for standardstyle punches
External keying for quickkey position changes
Built-in oiling systemensures thoroughinternal/external
lubrication
C, D & E Stations
Provides four timesmore grind life thantraditional old style
guide assemblies
•
Push button punchlength adjustment;
eliminating the needfor shims
Tapped for M-14T-handle carry and
extractor tool
Hardened steel guidefor longer life
Positive lockingstripper plate
retention
Optima™ coated keys forsuperior wear resistance
50.8mm (C) and 88.9mm(D) station guideassemblies are keyed at0°, 90° and 225°
Uses standard stripperplates
•
•
•
•
••
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 11:59 Page 7
8 UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
A Station2
Standard Shapes & Key Locations (Die View)
Notes
• Std. keying for square guides is0° & 45°.
• For add ons go to page 35.
† Slug Hugger®dies must beordered punch size plusclearance. Size restrictions apply.Slug Hugger 2 available onrequest. Contact Sales Desk forfurther information.
* ‘A’ Dimension = Longest distanceacross shape.
• Round 13767 13770 13773• Shape Fitted 13769 13772 13775• Optima® Add On - - -• Ultima™ Add On (Round) - - -• Ultima™ Add On (Shape) - - -
Punches • Round 2405 2385 2570• Shape 2406 2389 2575• Optima® Add On - - -• Ultima™ Add On (Round) - - -• Ultima™ Add On (Shape) - - -
Guides • Round 2821 2835 2849• Shape (0°) 2822 2836 2850• Shape (0° & 45°) 2903 2907 2911• Shape (0° & 90°) 2904 2908 2912• Round 13044 13045 13044• Shape Fitted 13143 13152 13143
Dies • Round Slug Hugger®† 2192 2192 2192• Round Standard 1808 1808 1808• Shape Slug Hugger®† 2193 2193 2193• Shape Standard 13801 13801 13801• Ultima™ Add On (Round) - - -• Ultima™ Add On (Shape) - - -
Description Cat. No. Price Cat. No. Price Cat. No. Price
Punch &GuideAssembly
Stripper
HP™ HP™ ABS
Maximum Material Thickness 3.81mm
SPRING PACK ASSEMBLYCat. No. 13735
DOWEL PIN(3/16 x .312) Cat. No. 6013
PUNCH HEAD ASSEMBLYCat. No. 13742
BALL BEARINGCat. No. 972420
•
••
•
•
O-RINGCat. No. 2282
DOWEL PIN(Replacement round only)
(3/16 x .312) Cat. No. 6013
BALL BEARINGCat. No. 972744
RETAINING RINGCat. No. 24290
•
Up to 12.7mm ‘A‘ Dimension*
•
•
•ADJUSTMENT SHAFT ASSEMBLYCat. No. 13736
CANISTERCat. No. 13737 •
SPRINGCat. No. 24291
•
HP™ WLS®
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 11:59 Page 8
9UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
A Station
Maximum Material Thickness 3.81mm
O-RINGCat. No. 2282
DOWEL PIN(3/16 x .312) Cat. No. 6013
RETAINING RING(Ball-lock design) Cat. No. 6853
ADJ. PUNCH HEAD WITH SCREWCat. No. 1802
SPRING RETAINER WITH O-RINGCat. No. 1804
PUNCH DRIVERCat. No. 2388
SOCKET HEAD SET SCREW CONE PT.(M6 x 6mm) (To be used with black oxide
adj. punch head) Cat. No. 6297
SPRINGCat. No. 1803
• •
•
•
•
•
Up to 12.7mm ‘A‘ Dimension*
Standard Shapes & Key Locations (Die View)
•DRIVER ASSEMBLYCat. No. 2455
INDEX PIN(2.31mm long) Cat. No. 6873
DOWEL PIN(Replacement round only) (3/16 x .312)Cat. No. 6013
BALL PLUNGER(M4 x 0.7) Cat. No. 8053
•
•
•
•
Notes
• Std. keying for square guides is0° & 45°.
• For add ons go to page 35.
† Slug Hugger®dies must beordered punch size plusclearance. Size restrictionsapply. Slug Hugger 2 availableon request. Contact Sales Deskfor further information.
* ‘A’ Dimension = Longest distanceacross shape.
• Round 12781 12793 12805• Shape Fitted 13137 13146 13155• Optima® Add On - - -• Ultima™ Add On (Round) - - -• Ultima™ Add On (Shape) - - -
Punches • Round 2405 2385 2570• Shape 2406 2389 2575• Optima® Add On - - -• Ultima™ Add On (Round) - - -• Ultima™ Add On (Shape) - - -
Guides • Round 2821 2835 2849• Shape (0°) 2822 2836 2850• Shape (0° & 45°) 2903 2907 2911• Shape (0° & 90°) 2904 2908 2912• Round 13044 13045 13044• Shape Fitted 13143 13152 13143
Dies • Round Slug Hugger®† 2192 2192 2192• Round Standard 1808 1808 1808• Shape Slug Hugger®† 2193 2193 2193• Shape Standard 13801 13801 13801• Ultima™ Add On (Round) - - -• Ultima™ Add On (Shape) - - -
Description Cat. No. Price Cat. No. Price Cat. No. Price
Punch &GuideAssembly
Stripper
HP™ HP™ ABS HP™ WLS®
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 11:59 Page 9
Heavy Duty A Station
10 UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Maximum Material Thickness 6.35mm
Up to 12.7mm ‘A‘ Dimension*
Standard Shapes & Key Locations (Die View)
O-RINGCat. No. 2282
DOWEL PIN(3/16 x .312) Cat. No. 6013
RETAINING RING(Ball-lock design) Cat. No. 6853
ADJ. PUNCH HEAD WITH SCREWCat. No. 2294
SPRING SUPPORT WITH O-RINGCat. No. 2295
PUNCH DRIVERCat. No. 2388
SOCKET HEAD SET SCREW CONE PT.(M6 x 6mm) (To be used with black oxide
adj. punch head) Cat. No. 6297
SPACERCat. No. 2296
• ••
•
•
• •DRIVER ASSEMBLYCat. No. 2477
INDEX PIN(2.31mm long) Cat. No. 6873
DOWEL PIN(Replacement round only) (3/16 x .312)Cat. No. 6013
BALL PLUNGER(M4 x 0.7) Cat. No. 8053
•
•
•
•
DISC SPRING(22 Req’d) Cat. No. 2297 •
Notes
• Std. keying for square guides is0° & 45°.
• For add ons go to page 35.
† Slug Hugger®dies must beordered punch size plusclearance. Size restrictionsapply. Slug Hugger 2 availableon request. Contact Sales Deskfor further information.
* ‘A’ Dimension = Longest distanceacross shape.
• Round 12857 12861 12865• Shape Fitted 13182 13185 13188• Optima® Add On - - -• Ultima™ Add On (Round) - - -• Ultima™ Add On (Shape) - - -
Punches • Round 2405 2385 2570• Shape 2406 2389 2575• Optima® Add On - - -• Ultima™ Add On (Round) - - -• Ultima™ Add On (Shape) - - -
Guides • Round 2821 2835 2849• Shape (0°) 2822 2836 2850• Shape (0° & 45°) 2903 2907 2911• Shape (0° & 90°) 2904 2908 2912• Round 13044 13045 13044• Shape Fitted 13143 13152 13143
Dies • Round Slug Hugger®† 2192 2192 2192• Round Standard 1808 1808 1808• Shape Slug Hugger®† 2193 2193 2193• Shape Standard 13801 13801 13801• Ultima™ Add On (Round) - - -• Ultima™ Add On (Shape) - - -
Description Cat. No. Price Cat. No. Price Cat. No. Price
Punch &GuideAssembly
Stripper
HP™ HP™ ABS HP™ WLS®
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 11:59 Page 10
Wilson Standard Quick Adjust A Station
11UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Maximum Material Thickness 3.81mm
QUICK ADJUST SPRING PACK ASSEMBLYCat. No. 13404
DOWEL PIN(3/16 x .312) Cat. No. 6013
DOWEL PIN(Replacement round only)(3/16 x .595) Cat. No. 6015
PUNCH HEADCat. No. 13405
RETAINING RINGCat. No. 24290
SPRING CANISTERCat. No. 13406
SOCKET HEAD SET SCREW(M6 x 6mm) Cat. No. 6297
SPRINGCat. No. 24297
• •• •
•
•
•
Description Cat. No. Price
Punch &GuideAssembly
• Round 13459• Shape Fitted 13461• Optima® Add On –
Punches • Round 1807• Shape 1816• Optima® Add On –
Guides • Round 2821• Shape (0°) 2822• Shape (0° & 45°) 2903• Shape (0° & 90°) 2904
Stripper • Round 13044• Shape Fitted 13143
Dies • Round Slug Hugger®† 2192• Round Standard 1808• Shape Slug Hugger®† 2193• Shape Standard 13801• Ultima™ Add On(Round) –• Ultima™ Add On(Shape) –
O-RINGCat. No. 2282
BALL PLUNGER(M4 x 0.7) Cat. No. 8053
SPRING SUPPORTCat. No. 13407
PUNCH HEAD RETAINERCat. No. 13396
NYLON WIRE RINGCat. No. 24437
•
•••
Up to 12.7mm ‘A‘ Dimension*
Standard Shapes & Key Locations (Die View)
•
Notes• For add ons go to page 35.
† Slug Hugger®dies must be ordered punch size plus clearance. Size restrictionsapply. Slug Hugger 2 available on request. Contact Sales Desk for furtherinformation.
* ‘A’ Dimension = longest distance across shape.
•STANDARD STRIPPER SHOWN(Full face stripper available on request)•
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 11:59 Page 11
Wilson Standard A Station
12 UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Maximum Material Thickness 3.81mm
• •
•
• •
•
•
RETAINING RING(2 Req’d) Cat. No. 1805
DOWEL PIN(3/16 x .312) Cat. No. 6013
DOWEL PIN(Replacement round only)(3/16 x .595) Cat. No. 6015
ADJ. PUNCH HEAD WITH SCREWCat. No. 1802
SPRING RETAINER WITH O-RINGCat. No. 1804
O-RINGCat. No. 2282
SOCKET HEAD SET SCREW CONE PT.(M6 x 6mm) (To be used with black oxide
adj. punch head) Cat. No. 6297
SPRINGCat. No. 1803
Up to 12.7mm ‘A‘ Dimension*
Description Cat. No. Price
Punch &GuideAssembly
• Round 13453• Shape Fitted 13455• Optima® Add On –
Punches • Round 1807• Shape 1816• Optima® Add On –
Guides • Round 2821• Shape (0°) 2822• Shape (0° & 45°) 2903• Shape (0° & 90°) 2904
Stripper • Round 13044• Shape Fitted 13143
Dies • Round Slug Hugger®† 2192• Round Standard 1808• Shape Slug Hugger®† 2193• Shape Standard 13801• Ultima™ Add On(Round) –• Ultima™ Add On(Shape) –
Standard Shapes & Key Locations (Die View)
•STANDARD STRIPPER SHOWN(Full face stripper available on request)
BALL PLUNGER(M4 x 0.7) Cat. No. 8053
•
•
Notes• For add ons go to page 35.
† Slug Hugger®dies must be ordered punch size plus clearance. Size restrictionsapply. Slug Hugger 2 available on request. Contact Sales Desk for furtherinformation.
* ‘A’ Dimension = longest distance across shape.
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 11:59 Page 12
Wilson Heavy Duty A Station
13UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
• Round 2292• Shape Fitted 2293• Optima® Add On –
Punches • Round 2303• Shape 2304• Optima® Add On –
Guides • Round 2821• Shape (0°) 2822• Shape (0° & 45°) 2903• Shape (0° & 90°) 2904
Stripper • Round 13044• Shape Fitted 13143
Dies • Round Slug Hugger®† 2192• Round Standard 1808• Shape Slug Hugger®† 2193• Shape Standard 13801• Ultima™ Add On(Round) –• Ultima™ Add On(Shape) –
Description Cat. No. Price
Punch &GuideAssembly
RETAINING RING(2 Req’d) Cat. No. 1805
SPRING SUPPORT WITH O-RINGCat. No. 2295
BALL PLUNGER(M4 x 0.7) Cat. No. 8053
SPACERCat. No. 2296
DISC SPRING(22 Req’d) Cat. No. 2297
O-RINGCat. No. 2282
•
• ••
•
•••
•Maximum Material Thickness 6.35mm
DOWEL PIN(3/16 x .312) Cat. No. 6013
DOWEL PIN(Replacement round only)
(3/16 x .595) Cat. No. 6015
ADJ. PUNCH HEAD WITH SCREWCat. No. 2294
SOCKET HEAD SET SCREW CONE PT.(M6-1 x 6mm) (To be used with black oxideadj. punch head) Cat. No. 6297
Up to 12.7mm A‘ Dimension*
Standard Shapes & Key Locations (Die View)
•
STANDARD STRIPPER SHOWN(Full face stripper available on request) •
Notes• For add ons go to page 35.
† Slug Hugger®dies must be ordered punch size plus clearance. Size restrictionsapply. Slug Hugger 2 available on request. Contact Sales Desk for furtherinformation.
* ‘A’ Dimension = longest distance across shape.
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 11:59 Page 13
14 UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
B Station2
Standard Shapes & Key Locations (Die View)
Notes
• Std. keying for square guides is 0°& 45°.
• For add ons go to page 35.
† Slug Hugger®dies must beordered punch size plusclearance. Size restrictions apply.Slug Hugger 2 available onrequest. Contact Sales Desk forfurther information.
* ‘A’ Dimension = Longest distanceacross shape.
• Round 13779 13782 13785• Shape Fitted 13781 13784 13787• Optima® Add On - - -• Ultima™ Add On (Round) - - -• Ultima™ Add On (Shape) - - -
Punches • Round 2407 2398 2581• Shape 2408 2399 2586• Optima® Add On - - -• Ultima™ Add On (Round) - - -• Ultima™ Add On (Shape) - - -
Guides • Round 2859 2881 2899• Shape (0°) 2860 2882 2900• Shape (0° & 45°) 2861 2883 2901• Shape (0° & 90°) 2862 2884 2902• Round 1890 2433 1890• Shape Fitted 1917 2432 1917
Dies • Round Slug Hugger®† 2194 2194 2194• Round Standard 2021 2021 2021• Shape Slug Hugger®† 2195 2195 2195• Shape Standard 13804 13804 13804• Ultima™ Add On (Round) - - -• Ultima™ Add On (Shape) - - -
Description Cat. No. Price Cat. No. Price
Punch &GuideAssembly
Stripper
HP™ HP™ ABS
Maximum Material Thickness 6.35mm
SPRING PACK ASSEMBLYCat. No. 13729
DOWEL PIN(3/16 x .345) Cat. No. 6431
BALL BEARINGCat. No. 972030
ADJUSTMENT SHAFT ASSEMBLYCat. No. 13730
PUNCH HEAD ASSEMBLYCat. No. 13741
SPRINGCat. No. 30
SOCKET HEAD SET SCREW(M6 x 10mm) Cat. No. 6206
CANISTERCat. No. 13731
• •••
•
•
•
•
DOWEL PIN(HPTM) (Replacement round only)(3/16 x .500) Cat. No. 2131
O-RINGCat. No. 2283
RETAINING RINGCat. No. 24294
BALL BEARINGCat. No. 972743
•
•
•
Up to 31.75mm A‘ Dimension*
•
BALL PLUNGER (NOT SHOWN)(M6 x 1.0) Cat. No. 8061
•
HP™ WLS®
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 11:59 Page 14
B Station
15UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Maximum Material Thickness 6.35mm
Up to 31.75mm A‘ Dimension*
Standard Shapes & Key Locations (Die View)
RING CLIPCat. No. 10044
DOWEL PIN(3/16 x .345) Cat. No. 6431
RETAINING RING(Ball-lock design) Cat. No. 2803
PUNCH DRIVER WITH HEADCat. No. 13566
SPRING RETAINER WITH O-RINGCat. No. 1824
SPRINGCat. No. 1953
•
•
••
•DRIVER ASSEMBLYCat. No. 2456
BALL BEARING(.187” Dia.) Cat. No. 8016
DOWEL PIN(HPTM) (Replacement round only)(3/16 x .500) Cat. No. 2131
BALL PLUNGER(M6 x 1.0) Cat. No. 8061
••
•
•
THREADED SPRING RETAINERWITH RING CLIPCat. No. 10043
INDEX PIN(3.96mm long) Cat. No. 6874
•
•
Notes
• Std. keying for square guides is0° & 45°.
• For add ons go topage 35.
† Slug Hugger®dies must beordered punch size plusclearance. Size restrictionsapply. Slug Hugger 2 availableon request. Contact Sales Deskfor further information.
* ‘A’ Dimension = Longest distanceacross shape.
O-RINGCat. No. 2283 •
Description Cat. No. Price Cat. No. Price Cat. No. Price
Punch &GuideAssembly
Stripper
HP™ HP™ ABS HP™ WLS®
•PUNCH HEAD WITH SET SCREWCat. No. 13558
• SET SCREWCat. No. 6206
DOWEL PIN(HPTMWLS® & HPTM ABS)(Replacement round only)(3/16 x .392) Cat. No. 6013
• Round 12827 12831 12845• Shape Fitted 13167 13170 13176• Optima® Add On - - -• Ultima™ Add On (Round) - - -• Ultima™ Add On (Shape) - - -
Punches • Round 2407 2398 2581• Shape 2408 2399 2586• Optima® Add On - - -• Ultima™ Add On (Round) - - -• Ultima™ Add On (Shape) - - -
Guides • Round 2859 2881 2899• Shape (0°) 2860 2882 2900• Shape (0° & 45°) 2861 2883 2901• Shape (0° & 90°) 2862 2884 2902• Round 1890 2433 1890• Shape Fitted 1917 2432 1917
Dies • Round Slug Hugger®† 2194 2194 2194• Round Standard 2021 2021 2021• Shape Slug Hugger®† 2195 2195 2195• Shape Standard 13804 13804 13804• Ultima™ Add On (Round) - - -• Ultima™ Add On (Shape) - - -
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 11:59 Page 15
Heavy Duty B Station
16 UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Maximum Material Thickness 7.93mm
Up to 31.75mm A‘ Dimension*
Standard Shapes & Key Locations (Die View)
RING CLIPCat. No. 10044
DOWEL PIN(3/16 x .345) Cat. No. 6431
RETAINING RING(Ball-lock design) Cat. No. 2803
PUNCH DRIVERCat. No. 13566
THREADED SPRING RETAINER WITHRING CLIP
Cat. No. 10043
O-RINGCat. No. 2283
SPACERCat. No. 2434
DISC SPRING(20 Req’d) Cat. No. 2302
••
•
•
•
•DRIVER ASSEMBLYCat. No. 2478
INDEX PIN(.156/3.96mm long) Cat. No. 6874
DOWEL PIN(Replacement round only)(3/16 x .500) Cat. No. 2131
BALL PLUNGER(M6 x 1.0) Cat. No. 8061
•••
•
SPRING SUPPORT WITH O-RINGCat. No. 2435
••
•
Notes
• Std. keying for square guides is0° & 45°.
• For add ons go to page 35.
† Slug Hugger®dies must beordered punch size plusclearance. Size restrictionsapply. Slug Hugger 2 availableon request. Contact Sales Deskfor further information.
* ‘A’ Dimension = Longest distanceacross shape.
• Round 12873 12877 12881• Shape Fitted 13194 13197 13200• Optima® Add On - - -• Ultima™ Add On (Round) - - -• Ultima™ Add On (Shape) - - -
Punches • Round 2407 2398 2581• Shape 2408 2399 2586• Optima® Add On - - -• Ultima™ Add On (Round) - - -• Ultima™ Add On (Shape) - - -
Guides • Round 2859 2881 2899• Shape (0°) 2860 2882 2900• Shape (0° & 45°) 2861 2883 2901• Shape (0° & 90°) 2862 2884 2902• Round 1890 2433 1890• Shape Fitted 1917 2432 1917
Dies • Round Slug Hugger®† 2194 2194 2194• Round Standard 2021 2021 2021• Shape Slug Hugger®† 2195 2195 2195• Shape Standard 13804 13804 13804• Ultima™ Add On (Round) - - -• Ultima™ Add On (Shape) - - -
Description Cat. No. Price Cat. No. Price Cat. No. Price
Punch &GuideAssembly
Stripper
HP™ HP™ ABS HP™ WLS®
DOWEL PIN(HPTM WLS® & HPTM ABS)(Replacement round only)(3/16 x .392) Cat. No. 6013
BALL BEARING(.187” Dia.) Cat. No. 8016
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 11:59 Page 16
Wilson Quick Adjust B Station
17UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Maximum Material Thickness 6.35mm
Description Cat. No. Price
Punch &GuideAssembly
• Round 13465• Shape Fitted 13467• Optima® Add On –
Punches • Round 1827• Shape 1839• Optima® Add On –
Guides • Round 2859• Shape (0°) 2860• Shape (0° & 45°) 2861• Shape (0° & 90°) 2862
Stripper • Round 1890• Shape Fitted 1917
Dies • Round Slug Hugger®† 2194• Round Standard 2021• Shape Slug Hugger®† 2195• Shape Standard 13804• Ultima™ Add On(Round) –• Ultima™ Add On(Shape) –
QUICK ADJUST SPRING PACK ASSEMBLYCat. No. 13408
DOWEL PIN(3/16 x .345) Cat. No. 6431
DOWEL PIN(Replacement round only)(3/16 x .500) Cat. No. 2131
RETAINING RINGCat. No. 2224
PUNCH HEADCat. No. 13409
RETAINING RINGCat. No. 24294
SPRING CANISTERCat. No. 13402
SOCKET HEAD SET SCREW(M6 x 10mm) Cat. No. 6206
SPRINGCat. No. 24299
• •• •
•
•
•
•
O-RINGCat. No. 2283
BALL PLUNGER(M6 x 1) Cat. No. 8061
SPRING SUPPORTCat. No. 13410
PUNCH HEAD RETAINERCat. No. 13401
RETAINING RINGCat. No. 974202
•
• ••
Up to 31.75mm A‘ Dimension*
Standard Shapes & Key Locations (Die View)
••
Notes• For add ons go to page 35.
† Slug Hugger®dies must be ordered punch size plus clearance. Size restrictionsapply. Slug Hugger 2 available on request. Contact Sales Desk for furtherinformation.
* ‘A’ Dimension = longest distance across shape.
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 11:59 Page 17
Wilson Standard B Station
18 UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Description Cat. No. Price
Punch &GuideAssembly
• Round 2851• Shape Fitted 2853• Optima® Add On –
Punches • Round 1827• Shape 1839• Optima® Add On –
Guides • Round 2859• Shape (0°) 2860• Shape (0° & 45°) 2861• Shape (0° & 90°) 2862
Stripper • Round 1890• Shape Fitted 1917
Dies • Round Slug Hugger®† 2194• Round Standard 2021• Shape Slug Hugger®† 2195• Shape Standard 13804• Ultima™ Add On(Round) –• Ultima™ Add On(Shape) –
•
•
•
•
••
RETAINING RINGCat. No. 2224
DOWEL PIN(3/16 x .345) Cat. No. 6431
DOWEL PIN(Replacement round only)
(3/16 x .500) Cat. No. 2131
ADJ. PUNCH HEAD WITH SCREWCat. No. 1821
SPRING RETAINER WITH O-RINGCat. No. 1824
O-RINGCat. No. 2283
BALL PLUNGER(M6 x 1) Cat. No. 8061
SOCKET HEAD SET SCREW CONE PT.(M6 x 10mm) (To be used with black oxideadj. punch head) Cat. No. 6206
SPRINGCat. No. 1953
•
Up to 31.75mm A‘ Dimension*
Standard Shapes & Key Locations (Die View)
••
Notes• For add ons go to page 35.
† Slug Hugger®dies must be ordered punch size plus clearance. Size restrictionsapply. Slug Hugger 2 available on request. Contact Sales Desk for furtherinformation.
* ‘A’ Dimension = longest distance across shape.
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 11:59 Page 18
Wilson Heavy Duty B Station
19UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Description Cat. No. Price
Punch &GuideAssembly
• Round 2298• Shape Fitted 2299• Optima® Add On –
Punches • Round 2305• Shape 2306• Optima® Add On –
Guides • Round 2859• Shape (0°) 2860• Shape (0° & 45°) 2861• Shape (0° & 90°) 2862
Stripper • Round 1890• Shape Fitted 1917
Dies • Round Slug Hugger®† 2194• Round Standard 2021• Shape Slug Hugger®† 2195• Shape Standard 13804• Ultima™ Add On(Round) –• Ultima™ Add On(Shape) –
RETAINING RINGCat. No. 2224
DOWEL PIN(3/16 x .345) Cat. No. 6431
DOWEL PIN(Replacement round only)(3/16 x .500) Cat. No. 2131
ADJ. PUNCH HEAD WITH SCREWCat. No. 1821
O-RINGCat. No. 2283
DISC SPRING(20 Req’d) Cat. No. 2302
SPRING SUPPORT WITH O-RINGCat. No. 2300
BALL PLUNGER(M6 x 1) Cat. No. 8061
SOCKET HEAD SET SCREW CONE PT.(M6 x 10mm) (To be used with black oxide
adj. punch head) Cat. No. 6206
SPACERCat. No. 2301
•
•
•
•
•
•
•
•
Standard Shapes & Key Locations (Die View)
Up to 31.75mm A‘ Dimension*
Maximum Material Thickness 7.93mm
•
•
Notes• For add ons go to page 35.
† Slug Hugger®dies must be ordered punch size plus clearance. Size restrictionsapply. Slug Hugger 2 available on request. Contact Sales Desk for furtherinformation.
* ‘A’ Dimension = longest distance across shape.
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 11:59 Page 19
C Station
20 UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Maximum Material Thickness 6.35mm
Up to 50.80mm A‘ Dimension*
Standard Shapes & Key Locations (Die View)
••• •
•
•
• •
•
• •
•
••
O-RING(1-1/8 X 3/32) Cat. No. 972430
RETAINING RINGCat. No. 972441SPRINGCat. No. 972396WAVE SPRINGCat. No. 971692DISC SPRING(12 Req’d) Cat. No. 5744
LOCK WASHERCat. No. 6327
ADJUSTMENT LOCKING BALLCat. No. 972420
ADJUSTMENT PUSH BUTTONCat. No. 10539
SPRING COVERCat. No. 5517
ANTI-LOCK SHIMCat. No. 5412
SPRING SUPPORTCat. No. 5008
DISC SPRING(2 Req’d) Cat. No. 971690
PUNCH HOLDERCat. No. 5510
URETHANE(2 Req’d) (3/32 Sq. x 27/64) (Pkg. of 50)
Cat. No. 6116SET SCREW
(2 Req’d) Cat. No. 6298
ADJUSTMENT SHAFTCat. No. 5735
DRIVERCat. No. 5736
••
SOCKET HEAD CAP SCREW(1/2-13 x 2-1/2) Cat. No. 6002LOCKING BUTTON(2 Req’d) Cat. No. 5519
•
••
•
PUNCH HOLDER KEYCat. No. 5373
•
GUIDE UNIT ASSEMBLY(HPTM & HPTM WLS®) Cat. No. 5544
(HPTM ABS) Cat. No. 5509
SPRING(5 Req’d) (.148 x 1) Cat. No. 971694
SPECIAL PIN(2 Req’d) Cat. No. 5522
STRIPPER CLIP(3 Req’d) Cat. No. 5521
DRIVER ASSEMBLYCat. No. 5724LOCK WASHER(2 Req’d) Cat. No. 2112SOCKET HEAD CAP SCREW(2 Req’d) (spl M5 x.8 Cone Pt.)Cat. No. 5197
RETAINING RINGCat. No. 5746
SOCKET HEAD CAP SCREW(M3 x 12mm) Cat. No. 6326
WAVE SPRING(2 Req’d) Cat. No. 8155GUIDE STRIPPER RING(HPTM & HPTM WLS®) Cat. No. 5545(HPTM ABS) Cat. No. 5520
•
•
••
••
•
Notes
• HP™ guide assys. are keyed forshapes at 0°, 90° & 225°.
• All punches will be shipped withno shear unless specified.
• Heavy Duty tooling is availablefor 2” (C) stations.
• For add ons go to page 35.
† Slug Hugger®dies must beordered punch size plusclearance. Size restrictionsapply. Slug Hugger 2 availableon request. Contact Sales Deskfor further information.
* ‘A’ Dimension = Longest distanceacross shape.
5552 5508 5543
Punches • Round 5026 5026 5026• Shape 5025 5025 5025• Optima® Add On - - -• Ultima™ Add On (Round) - - -• Ultima™ Add On (Shape) - - -
• Round 1848 5150 1848• Shape Fitted 1854 5151 1854
Dies • Round Slug Hugger®† 2196 2196 2196• Round Standard 1850 1850 1850• Shape Slug Hugger®† 2197 2197 2197• Shape Standard 13807 13807 13807• Ultima™ Add On (Round) - - -• Ultima™ Add On (Shape) - - -
Description Cat. No. Price Cat. No. Price Cat. No. Price
GuideAssembly
Stripper
HP™ HP™ ABS HP™ WLS®
•
•
GUIDE UNIT ONLY(HPTM & HPTM WLS®) Cat. No. 5574
(HPTM ABS) Cat. No. 5518
•
WITH PUSH BUTTON STRIPPER RETENTION
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 11:59 Page 20
Wilson Standard C Station
21UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
RETAINING RINGCat. No. 972441
O-RINGCat. No. 972430
PUNCH DRIVERCat. No. 5736
DRIVER LOCKING BUTTON(NOT SHOWN)Cat. No. 10539
ANTI LOCK SHIMCat. No. 5412
SPRING SUPPORTCat. No. 5748
BALL BEARINGCat. No. 972420
RETAINING RINGCat. No. 972570
DISC SPRING(2 Req’d) Cat. No. 971690
DRIVER ASSEMBLYCat. No. 5729
PUNCH HOLDERCat. No. 5510
URETHANE(2 Req’d) (Pkg. of 50)
Cat. No. 6116SOCKET SET SCREW (WITH NYLOCK)
(2 Req’d) (M6 X 8mm)Cat. No. 6298
GUIDECat. No. 5420
WAVE SPRINGCat. No. 971692
SOCKET HEAD CAP SCREW(1/2 - 13 X 2 - 1/4)Cat. No. 6002
Maximum Material Thickness 6.35mm
Notes
Standard Shapes & Key Locations (Die View)
• For add ons go to page 35.
• Standard guide assys. are keyed for shapes at 0°, 90° and 225°.
• All punches will be shipped with no shear unless specified.
† Slug Hugger® dies must be ordered punch size plus clearance. Size restrictionsapply. Slug Hugger 2 available on request. Contact Sales Desk for furtherinformation.
* ‘A’ Dimension = longest distance across shape.
• Standard 5586• Standard (LVD) 35194• Standard WLS® 5595• Standard WLS® (LVD) 35195
Punches • Round 5026• Shape 5025• Optima® Add On –• Ultima™ Add On (Round) –• Ultima™ Add On (Shape) –
Strippers • Round 1848• Shape 1854
Dies • Round Slug Hugger®† 2196• Round Standard 1850• Shape Slug Hugger®† 2197• Shape Standard 13807• Ultima™ Add On(Round) –• Ultima™ Add On(Shape) –
Description Cat. No. Price
GuideAssembly
SOCKET HEAD CAP SCREW(M3 X 12mm) Cat. No. 6326
PUNCH HOLDER KEYCat. No. 5373
•
•
•
•
•
•
•
•
••
•••
•
•
•
Up to 50.8mm A‘ Dimension*
•
ADJUSTEMENT SHAFT ASSEMBLYCat. No. 5735
•
LOCKWASHERCat. No. 6327
DISC SPRING(12 Req’d) Cat. No. 5744
•
WIRE SPRING (FOR DRIVER LOCKINGBUTTON NOT SHOWN)Cat. No. 972396
WIRE LOCK RINGCat. No. 5035
LOCK WASHER(2 Req’d) Cat. No. 2112
SPECIAL SOCKET HEAD CAP SCREW(2 Req’d) Cat. No. 5197
SPECIAL SCREWCat. No. 429
••
••
•
SPRING COVERCat. No. 5693 •
STRIPPER RETAINED WITH WIRE LOCK RING OR STRIPPER CLIPS
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 11:59 Page 21
D Station
22 UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Standard Shapes & Key Locations (Die View)
Maximum Material Thickness 6.35mm
•••
•
•
••
•
•
•
•
•
•
RETAINING RINGCat. No. 972441
O-RING(1-1/8 X 3/32) Cat. No. 972430SPRINGCat. No. 972396DRIVERCat. No. 5740WAVE SPRINGCat. No. 971692
LOCK WASHER(2 Req’d) Cat. No. 2112
SPRING COVERCat. No. 5561
ADJUSTMENT LOCKING BALLCat. No. 972420
ANTI-LOCK SHIMCat. No. 5413
SOCKET HEAD CAP SCREW(2 Req’d) (Spl M5 x.8 Cone Pt.)
Cat. No. 5197
RETAINING RINGCat. No. 5747
LOCK WASHER(2 Req’d) Cat. No. 2112
DISC SPRING(2 Req’d) Cat. No. 971690
PUNCH HOLDERCat. No. 5525
URETHANE(2 Req’d) (3/32 Sq. x 27/64) (Pkg. of 50)
Cat. No. 6116
ADJUSTMENT PUSH BUTTONCat. No. 5737
ADJUSTMENT SHAFTCat. No. 5739
••
SOCKET HEAD CAP SCREW(1/2-13 x 2-1/2) Cat. No. 6566
WAVE SPRING(2 Req’d) Cat. No. 8155
•
•
•
PUNCH HOLDER KEYCat. No. 1862
•
SET SCREW(2 Req’d) Cat. No. 6298
SPRING(6 Req’d) Cat. No. 971694
SPECIAL PIN(2 Req’d) Cat. No. 5522
STRIPPER CLIP(3 Req’d) Cat. No. 5521
DRIVER ASSEMBLYCat. No. 5725
DISC SPRING(7 Req’d) Cat. No. 5449
SPRING SUPPORTCat. No. 5738
SOCKET HEAD CAP SCREW(2 Req’d) (M5 x 12mm)Cat. No. 6110
LOCKING BUTTON(2 Req’d) Cat. No. 5519
•
•
•
•
•
•••
Up to 88.90mm A‘ Dimension*
•
•
•
•
Notes
• HP™ guide assys. are keyed forshapes at 0°, 90°, & 225°.
• 1.6mm Rooftop shear is given toall punches with ‘A’ dimensiongreater than 50.8mm, and widthgreater than 6.35mm, at noextra charge.
• All punches 6.35mm and underin width will be shipped with noshear unless specified.
• For add ons go to page 35.
† Slug Hugger® dies must beordered punch size plusclearance. Size restrictionsapply. Slug Hugger 2 availableon request. Contact Sales Deskfor further information.
* ‘A’ Dimension = Longest distanceacross shape.
5553 5523 5546
Punches • Round 5028 5028 5028• Shape 5027 5027 5027• Optima® Add On - - -• Ultima™ Add On (Round) - - -• Ultima™ Add On (Shape) - - -
• Round 1864 5152 1864• Shape Fitted 1869 5153 1869
Dies • Round Slug Hugger®† 2198 2198 2198• Round Standard 1865 1865 1865• Shape Slug Hugger®† 2199 2199 2199• Shape Standard 13810 13810 13810• Ultima™ Add On (Round) - - -• Ultima™ Add On (Shape) - - -
Description Cat. No. Price Cat. No. Price Cat. No. Price
GuideAssembly
Stripper
HP™ HP™ ABS HP™ WLS®
GUIDE UNIT ASSEMBLY(HPTM & HPTM WLS®) Cat. No. 5547
(HPTM ABS) Cat. No. 5524GUIDE UNIT ONLY
(HPTM & HPTM WLS®) Cat. No. 5575(HPTM ABS) Cat. No. 5527
GUIDE STRIPPER RING(HPTM & HPTM WLS®) Cat. No. 5548(HPTM ABS) Cat. No. 5528
WITH PUSH BUTTON STRIPPER RETENTION
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 12:00 Page 22
Wilson Standard D Station
23UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
•
•
•
•
•
••
••
•
•
• •
•
•
•
•
•
•
Notes
Standard Shapes & Key Locations (Die View)
RETAINING RINGCat. No. 972441
O-RINGCat. No. 972430
WIRE SPRING (FOR DRIVER LOCKINGBUTTON NOT SHOWN)Cat. No. 972396
PUNCH DRIVERCat. No. 5740
DRIVER LOCKING BUTTON(NOT SHOWN)Cat. No. 5737
DRIVER ASSEMBLYCat. No. 5730
ADJUSTMENT SHAFT ASSEMBLYCat. No. 5739
RETAINING RINGCat. No. 5747
WAVE SPRINGCat. No. 971692
DISC SRPING(7 Req’d) Cat. No. 5449
Maximum Material Thickness 6.35mm
SPRING SUPPORTCat. No. 5738
BALL BEARINGCat. No. 972420
Up to 88.9mm A‘ Dimension*
• Standard 5587• Standard (LVD) 35201• Standard WLS® 5596• Standard WLS® (LVD) 35202
Punches • Round 5028• Shape 5027• Optima® Add On –• Ultima™ Add On (Round) –• Ultima™ Add On (Shape) –
Strippers • Round 1864• Shape 1869
Dies • Round Slug Hugger®† 2198• Round Standard 1865• Shape Slug Hugger®† 2199• Shape Standard 13810• Ultima™ Add On(Round) –• Ultima™ Add On(Shape) –
Description Cat. No. Price
GuideAssembly
ANTI LOCK SHIMCat. No. 5413
DISC SPRING(2 Req’d) Cat. No. 971690
PUNCH HOLDERCat. No. 5525
URETHANE(2 Req’d) (Pkg. of 50)
Cat. No. 6116SOCKET SET SCREW (WITH NYLOCK)
(2 Req’d) (M6 X 8mm)Cat. No. 6298
GUIDECat. No. 5430
SOCKET HEAD CAP SCREW(1/2 - 13 X 2 - 1/2)Cat. No. 6566
SOCKET HEAD CAP SCREW(2 Req’d) (M5 X 12mm)Cat. No. 6110
PUNCH HOLDER KEYCat. No. 1862
LOCKWASHER(2 Req’d) Cat. No. 2112
SPECIAL SOCKET HEAD SCREW CAP(2 Req’d) Cat. No. 5197
LOCK WASHER(2 Req’d) Cat. No. 2112
••
•
•
•
SPRING COVERCat. No. 5423 •
SPECIAL SCREWCat. No. 429
WIRE LOCK RINGCat. No. 5036
STRIPPER RETAINED WITH WIRE LOCK RING OR STRIPPER CLIPS
• For add ons go to page 35.
• Standard guide assys. are keyed for shapes at 0˚, 90˚, 225˚.
• 1.6mm Rooftop shear is given to all punches with 'A' dimension greater than50.8mm, and width greater than 6.35mm, at no extra charge.
• All punches 6.35mm and under in width will be shipped with no shear unlessspecified.
† Slug Hugger® dies must be ordered punch size plus clearance. Size restrictionsapply. Slug Hugger 2 available on request. Contact Sales Desk for furtherinformation.
* ‘A’ Dimension = longest distance across shape.
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 12:00 Page 23
E Station
24 UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Maximum Material Thickness 6.35mm
Standard Shapes & Key Locations (Die View)
Up to 114.30mm A‘ Dimension*
•••
•
•
•
•
•
•
•
•
RETAINING RINGCat. No. 972441
O-RING(7/8 X 3/32) Cat. No. 972430SPRINGCat. No. 972396
WAVE SPRINGCat. No. 971692DRIVERCat. No. 5742
PUNCH HOLDER KEYCat. No. 1862
DISC SPRING(7 Req’d) Cat. No. 5449
ADJUSTMENT LOCKING BALLCat. No. 972420
ANTI-LOCK SHIMCat. No. 5413
LIFTER PIN(4 Req’d) Cat. No. 5209
SOCKET HEAD CAP SCREW(4 Req’d) (Spl M5 x 13.39mm Cone Pt.)
Cat. No. 5210DISC SPRING
Cat. No. 971690PUNCH HOLDER
Cat. No. 5535
ADJUSTMENT PUSH BUTTONCat. No. 5737
ADJUSTMENT SHAFTCat. No. 5739
••
WAVE SPRING(2 Req’d) Cat. No. 8155
•
••
SOCKET HEAD CAP SCREW(1/2-13 x 2) Cat. No. 6325
URETHANE(2 Req’d) (3/32 Sq. x 27/64) (Pkg.of 50)
Cat. No. 6116
SPRING(6 Req’d) Cat. No. 971694
SPECIAL PIN(2 Req’d) Cat. No. 5522
STRIPPER CLIP(3 Req’d) Cat. No. 5521
DRIVER ASSEMBLYCat. No. 5726
SPRING SUPPORTCat. No. 5741
LOCK WASHER(2 Req’d) (For M5) Cat. No. 2112
LOCKING BUTTON(2 Req’d) Cat. No. 5519
•
•
•
•
•
•
•
SET SCREW(2 Req’d) Cat. No. 6298
•
•
•
•
SPRING COVERCat. No. 5561
RETAINING RINGCat. No. 5747SOCKET HEAD CAP SCREW(2 Req’d) (M5 x 12m) Cat. No. 6110
•
•
Notes
• HP™ guide assys. are keyed forshapes at 0° & 90°.
• 1.6mm Rooftop shear is given toall punches with ‘A’ dimensiongreater than 50.8mm, and widthgreater than 6.35mm, at noextra charge.
• All punches 6.35mm and underin width will be shipped with noshear unless specified.
• For add ons go to page 35.
† Slug Hugger®dies must beordered punch size plusclearance. Size restrictionsapply. Slug Hugger 2 availableon request. Contact Sales Deskfor further information.
* ‘A’ Dimension = Longest distanceacross shape.
5554 5533 5549
Punches • Round 5030 5030 5030• Shape 5029 5029 5029• Optima® Add On - - -• Ultima™ Add On (Round) - - -• Ultima™ Add On (Shape) - - -
• Round 1877 5154 1877• Shape Fitted 1882 5155 1882
Dies • Round Slug Hugger®† 2200 2200 2200• Round Standard 1878 1878 1878• Shape Slug Hugger®† 2201 2201 2201• Shape Standard 13817 13817 13817• Ultima™ Add On (Round) - - -• Ultima™ Add On (Shape) - - -
Description Cat. No. Price Cat. No. Price Cat. No. Price
GuideAssembly
Stripper
HP™ HP™ ABS HP™ WLS®
•
GUIDE STRIPPER RING(HPTM & HPTM WLS®) Cat. No. 5551(HPTM ABS) Cat. No. 5538
GUIDE UNIT ASSEMBLY(HPTM & HPTM WLS®) Cat. No. 5550
(HPTM ABS) Cat. No. 5534GUIDE UNIT ONLY
(HPTM & HPTM WLS®) Cat. No. 5576(HPTM ABS) Cat. No. 5537
•
WITH PUSH BUTTON STRIPPER RETENTION
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 12:00 Page 24
Wilson Standard E Station
25UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
•
• •
•
•
•
••
•• •
•
•
•
••
••
Maximum Material Thickness 6.35mm
Standard Shapes & Key Locations (Die View)
• Standard 5588• Standard (LVD) 35205• Standard WLS® 5597• Standard WLS® (LVD) 35207
Punches • Round 5030• Shape 5029• Optima® Add On –• Ultima™ Add On (Round) –• Ultima™ Add On (Shape) –
Strippers • Round 1877• Shape 1882
Dies • Round Slug Hugger®† 2200• Round Standard 1878• Shape Slug Hugger®† 2201• Shape Standard 13817• Ultima™ Add On(Round) –• Ultima™ Add On(Shape) –
Description Cat. No. Price
GuideAssembly
Up to 114.3mm A‘ Dimension*
RETAINING RINGCat. No. 972441
ANTI LOCK SHIMCat. No. 5413
BALL BEARINGCat. No. 972420
RETAINING RINGCat. No. 5747
DISC SPRING(2 Req’d) Cat. No. 971690
PUNCH HOLDERCat. No. 5535
URETHANE(2 Req’d) (Pkg.of 50)
Cat. No. 6116
SOCKET SET SCREW (WITH NYLOCK)(2 Req’d) (M6 X 8mm)
Cat. No. 6298
WAVE SPRINGCat. No. 971692
DISC SPRING(7 Req’d) Cat. No. 5449
O-RINGCat. No. 972430
WIRE SPRING (DRIVER LOCKINGBUTTON NOT SHOWN)Cat. No. 972396PUNCH DRIVERCat. No. 5742
DRIVER LOCKING BUTTON(NOT SHOWN)Cat. No. 5737
SPRING SUPPORTCat. No. 5741
DRIVER ASSEMBLYCat. No. 5731
SOCKET HEAD CAP SCREW(1/2 - 13 X 2) Cat. No. 6325
SOCKET HEAD CAP SCREW(2 Req’d) (M5 X 12mm)Cat. No. 6110
PUNCH HOLDER KEYCat. No. 1862
ADJUSTMENT SHAFT ASSEMBLYCat. No. 5739
LOCKWASHER(2 Req’d) Cat. No. 2112
•
WIRE LOCK RINGCat. No. 5037
LIFTER BUTTON(4 Req’d) Cat. No. 5209
SPECIAL SOCKET HEAD CAP SCREW(4 Req’d) Cat. No. 5210
••
•
•
•
SPRING COVERCat. No. 5423
•
SPECIAL SCREWCat. No. 429
GUIDECat. No. 5438
STRIPPER RETAINED WITH WIRE LOCK RING OR STRIPPER CLIPS
Notes• For add ons go to page 35.
• Standard guide assys. are keyed for shapes at 0˚, 90˚, 225˚.
• 1.6mm Rooftop shear is given to all punches with 'A' dimension greater than50.8mm, and width greater than 6.35mm, at no extra charge.
• All punches 6.35mm and under in width will be shipped with no shear unlessspecified.
† Slug Hugger® dies must be ordered punch size plus clearance. Size restrictionsapply. Slug Hugger 2 available on request. Contact Sales Desk for furtherinformation.
* ‘A’ Dimension = longest distance across shape.
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 12:00 Page 25
Close to Clamps Tooling
26 UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Description Cat. No. Price
GuideAssembly
Punches
Guide
Stripper
Dies
88.9mm (D) Station for punching close to clamps
• Thin Clamps• Thick Clamps
• Thin Clamps• Thick Clamps• Optima®
• Ultima™Add On
• (Guide Unit Assembly)• Thin Clamps• Thick Clamps
• Thin Clamps• Thick Clamps
• Slug Hugger®†(relief 2 sides, shp at 90˚)
• Slug Hugger®†(relief 2 sides, shpat 0˚-90˚)
• Slug Hugger®†(relief 1 side, shp at 90˚)
• Slug Hugger®†(relief 1 side, shpat0 -̊90 )̊
• Standard(relief 2 sides, shp at 90˚)
• Standard(relief 2 sides, shpat 0˚-90˚)
• Standard(relief 1 side, shp at 90˚)
• Standard(relief 1 side, shpat0 -̊90 )̊
51795180
50275114--
51125116
51005115
5157
5330
2464
5333
13814
13813
13812
13811
NotesAll punches will be shipped with no shear unless specified.
† Slug Hugger® dies must be ordered punch size plus clearance. Size restrictions apply. Contact Sales Desk for further information.
* 'A' Dimension = longest distance across shape.
Description Cat. No. Price
GuideAssembly
Punches
Guide
Stripper
Dies
114.3mm (E) Station for punching close to clamps
• Thin Clamps• Thick Clamps
• Thin Clamps• Thick Clamps• Optima®
• Ultima™Add On
• (Guide Unit Assembly)• Thin Clamps• Thick Clamps
• Thin Clamps• Thick Clamps
• Slug Hugger®†(relief 2 sides, shp at 90˚)
• Slug Hugger®†(relief 2 sides, shpat 0˚-90˚)
• Slug Hugger®†(relief 1 side, shp at 90˚)
• Slug Hugger®†(relief 1 side, shpat0 -̊90 )̊
• Positive(relief 2 sides, shp at 90˚)
• Positive(relief 2 sides, shpat 0˚-90˚)
• Positive(relief 1 side, shp at 90˚)
• Positive(relief 1 side, shpat0 -̊90 )̊
51775178
50295109--
51075111
50945110
5159
5340
2467
5343
13821
13820
13819
13818
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 12:00 Page 26
DuraDie
27UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Slitting, complex shapes, clusters and close to clamps –DuraDie is the perfect solution for all these jobs
Slitting SolutionThis is a special die holder assembly which provides youwith the ideal slitting solution. The die inserts are fullysupported by the die base and are hard wearing andeconomical to replace.
Problem SolvingThe DuraDie assembly is also the perfect solution whenyou are punching complex two dimensional shapes andcluster patterns with small webs between holes. In factthe DuraDie system can help whenever die strength is anissue.
Shock ResistantThe aperture (which closely follows the profile in the dieinsert), is cut into the shock resistant die holder whichfully supports the special die blade and the speciallylocated shims.
DurableWith a die insert made using Ultima™, a specialpowdered tool steel, you will get more hits betweenregrinds and reduced downtime.
Practical & EconomicalThe complete assembly consists of a special die insert,a shim pack and a specially reinforced die holder. Youcan order duplicate die inserts for different materials andif you need to replace a worn die all you need isa new insert.
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 12:00 Page 27
DuraDie
28 UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Description Cat. No. Price
Die Base Assembly (not including die blade) 12989
Die Blade (Slughugger) 12992
Shim Pack 12995
Knockout Tool 24310
50.8mm (C) Station Slitting
Maximum length * =51mm Maximum width * = 7mm *Subject to certain restrictions
Description Cat. No. Price
Die Base Assembly (not including die blade) 13006
Die Blade (Slughugger) 13009
Shim Pack 13012
Knockout Tool 24310
88.9mm (D) Station Slitting
Maximum length * = 86mm Maximum width * = 7mm *Subject to certain restrictions
Description Cat. No. Price
Die Base Assembly 0&90° (not including die blade) 13276
Die Blade – relieved on 1 side (Slughugger) 13280
Die Blade – relieved on 2 sides (Slughugger) 13282
Shim Pack 13012
Knockout Tool 24310
88.9mm (D) Station Close to Clamps
Maximum length * = 81mm Maximum width * = 7mm *Subject to certain restrictions
Description Cat. No. Price
Die Base Assembly (not including die blade) 13015
Die Blade (Slughugger) 13014
Shim Pack 13017
Knockout Tool 24313
114.3mm (E) Station Slitting
Maximum length * = 111mm Maximum width * = 11mm *Subject to certain restrictions
Description Cat. No. Price
Die Base Assembly 0&90° (not including die blade) 13284
Die Blade – relieved on 1 side (Slughugger) 13288
Die Blade – relieved on 2 sides (Slughugger) 13290
Shim Pack 13017
Knockout Tool 24313
114.3mm (E) Station Close to Clamps
Maximum length * = 111mm Maximum width * = 11mm *Subject to certain restrictions
•
M6 X 10 LG BALL ENDED THRUST SCREWCat. No. 24323
DIE HOLDERCat. No. 12990
Ø3 X 12 LG ROLL PINCat. No. 24233
••
•
M6 X 10 LG BALL ENDED THRUST SCREWCat. No. 24323
DIE HOLDERCat. No. 13007
Ø3 X 12 LG ROLL PINCat. No. 24233
••
•
M6 X 10 LG BALL ENDED THRUST SCREWCat. No. 24323
DIE HOLDERKEYED AT 0° & 90°Cat. No. 13276
Ø3 X 12 LG ROLL PINCat. No. 24233
••
•
M6 X 10 LG BALL ENDED THRUST SCREWCat. No. 24323
DIE HOLDERCat. No. 13016
Ø3 X 12 LG ROLL PINCat. No. 24233
••
•
M6 X 10 LG BALL ENDED THRUST SCREWCat. No. 24323
DIE HOLDERKEYED AT 0° & 90°Cat. No. 13284
Ø3 X 12 LG ROLL PINCat. No. 24233
••
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 12:00 Page 28
DuraBlade
29UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Fast efficient slitting... even close to the clamps
Reduced CostsThe replaceable punch blade is made of UltimaTM, aspecial powdered metallurgy high speed steel thatgives you more hits between regrinds and helps toreduce down time.
PracticalWith its patented HP push button length adjustment andstripper release, the new DuraBlade assembly is quickand easy to use.
Increased ProfitsDuraBlade is designed for improved close to clampsoperation. This means that more of the sheet isavailable to you and less material is wasted.
AccurateThe punch blade is fully guided right to the surface ofthe material resulting in much cleaner results for yourslitting/parting tasks and reduced wear and tear onthe punch and die.
The DuraBlade assembly is available for the D & Estations of most Thick Turret machines in standard,ABS and WLS configurations.
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 12:00 Page 29
DuraBlade D Station
30 UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Notes
• HP™ DuraBlade™ guideassemblies are keyed for shapesat 0°, 90° & 135°.
• One-sided relief stripper platesand dies available upon request.Contact sales desk for price andavailability.
• Single 90° die key optionavailable upon request. Contactsales desk for price andavailability.
• Maximum width for blade insert is19.05mm
† Slug Hugger®dies must beordered punch size plusclearance. Size restrictions apply.Slug Hugger 2 available onrequest. Contact Sales Desk forfurther information.* ‘A’ Dimension = longest distanceacross shape.
5663 5653 5660
Punches • Blade 5657 5657 5657• Optima® Add On - - -
• Thick Clamps 5656 5664 5656
Dies • Slug Hugger®† (relief 2sides, shape at 0 & 90°) 5330 5330 5330
• Standard (relief 2 sides,shape at 0 & 90°) 5328 5328 5328
Description Cat. No. Price Cat. No. Price Cat. No. Price
GuideAssembly
••
••
•
•
• •
•
•
•
•
•
•
RETAINING RINGCat. No. 972441
O-RING(7/8 X 3/32) Cat. No. 972430
SPRINGCat. No. 972396WAVE SPRINGCat. No. 971692
DRIVER ASSEMBLYCat. No. 5680
LOCK WASHER(2 Req’d) (For M5) Cat. No. 2112
SOCKET HEAD CAP SCREW(2 Req’d) (M5 x 12mm)Cat. No. 6110
SPRING SUPPORTCat. No. 5738
DRIVERCat. No. 5740
ANTI-LOCK SHIMCat. No. 5413
RETAINING RINGCat. No. 5747
SOCKET HEAD CAP SCREW(2 Req’d) (Spl M5 x.8 Cone Pt.)
Cat. No. 5197
LOCK WASHER(2 Req’d) Cat. No. 2112
ADJUSTMENT PUSH BUTTONCat. No. 5737
ADJUSTMENT SHAFTCat. No. 5739
•
•
PUNCH HOLDER KEYCat. No. 1862
URETHANE(2 Req’d) (3/32 Sq. x 24/64) (Pkg. of 50)Cat. No. 6116
Maximum Material Thickness 6.35mm
DISC SPRING(7 Req’d) Cat. No. 5449
•
•
•
ADJUSTMENT LOCKING BALLCat. No. 972420
•
•
SET SCREW(2 Req’d) (M6 x 8mm Lg. SSS w/Nylok)Cat. No. 6298
50.83 - 88.90mm A‘ Dimension*
SOCKET HEAD CAP SCREW(M12 x 55mm) Cat. No. 6026
BUSHINGCat. No. 5631
SPRING(6 Req’d) Cat. No. 971694
SPECIAL PIN(2 Req’d) Cat. No. 5522
SPECIAL CLIP(3 Req’d) Cat. No. 5521
PUNCH HOLDERCat. No. 5655
SPRING COVERCat. No. 5679
LOCKING BUTTON(2 Req’d) Cat. No. 5519
WAVE SPRING(2 Req’d) Cat. No. 8155
Stripper
HP™ HP™ ABS HP™ WLS®
•
•••
•
••
•
DISC SPRING(2 Req’d) Cat. No. 971690
•
GUIDE STRIPPER RING(HPTM & HPTM WLS®) Cat. No. 5548(HPTM ABS) Cat. No. 5528
GUIDE UNIT ASSEMBLY(HPTM & HPTM WLS®) Cat. No. 5661
(HPTM ABS) Cat. No. 5654
GUIDE UNIT ONLY(HPTM & HPTM WLS®) Cat. No. 5662
(HPTM ABS) Cat. No. 5659
•
•
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 12:00 Page 30
DuraBlade E Station
31UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Notes
• HP™ DuraBlade™ guideassemblies are keyed for shapesat 0° & 90°.
• One-sided relief stripper platesand dies available upon request.Contact sales desk for price andavailability.
• Single 90° die key optionavailable upon request. Contactsales desk for price andavailability.
• Maximum width for blade insert is19.05mm
† Slug Hugger®dies must beordered punch size plusclearance. Size restrictions apply.Slug Hugger 2 available onrequest. Contact Sales Desk forfurther information.* ‘A’ Dimension = longest distanceacross shape.
5639 5626 5636
Punches • Blade 5630 5630 5630• Optima® Add On - - -
• Thick Clamps 5629 5640 5629
Dies • Slug Hugger®† (relief 2sides, shape at 0 & 90°) 5340 5340 5340
• Standard (relief 2 sidesshape at 0 & 90°) 5338 5338 5338
Description Cat. No. Price Cat. No. Price Cat. No. Price
GuideAssembly
••
••
•
•
•• •
•
•
•
•
RETAINING RINGCat. No. 972441
O-RING(7/8 X 3/32) Cat. No. 972430
DRIVERCat. No. 5742
SPRINGCat. No. 972396
DRIVER ASSEMBLY(7 Req’d) Cat. No. 5728
SOCKET HEAD CAP SCREW(2 Req’d) (M5 x 12mm) Cat. No. 6110
SPRING SUPPORTCat. No. 5741
SPRING COVERCat. No. 5679
LIFTER PIN(4 Req’d) Cat. No. 5209
RETAINING RINGCat. No. 5747
SOCKET HEAD CAP SCREW(2 Req’d) (Spl M5 x 13.39mm Cone Pt.)
Cat. No. 5210
ADJUSTMENT PUSH BUTTONCat. No. 5737
ADJUSTMENT SHAFTCat. No. 5739
••
Maximum Material Thickness 6.35mm
WAVE SPRINGCat. No. 971692
•
•
•
ADJUSTMENT LOCKING BALLCat. No. 972420
•
•
•
88.93 - 114.30mm A‘ Dimension*
ANTI-LOCK SHIMCat. No. 5413
SOCKET HEAD CAP SCREW(M12 x 55mm) Cat. No. 6026
DISK SPRING(2 Req’d) Cat. No. 971690
BUSHINGCat. No. 5631
SPRING(2 Req’d) Cat. No. 971694
SPECIAL PIN(2 Req’d) Cat. No. 5522
STRIPPER CLIP(3 Req’d) Cat. No. 5521
DISC SPRING(7 Req’d) Cat. No. 5499
Stripper
HP™ HP™ ABS HP™ WLS®
LOCK WASHER(2 Req’d) Cat. No. 2112
PUNCH HOLDER KEYCat. No. 1862
URETHANE(2 Req’d) (3/32 Sq. x 27/64) (Pkg. of 50)Cat. No. 6116
PUNCH HOLDERCat. No. 5628
LOCKING BUTTON(2 Req’d) Cat. No. 5519
WAVE SPRING(2 Req’d) Cat. No. 8155
SET SCREW(2 Req’d) (M6 x 8mm Lg. SSS w/Nylok)Cat. No. 6298
•
•
•
•
•
•
•
•
•
GUIDE STRIPPER RING(HPTM & HPTM WLS®) Cat. No. 5551(HPTM ABS) Cat. No. 5538
GUIDE UNIT ASSEMBLY(HPTM & HPTM WLS®) Cat. No. 5637
(HPTM ABS) Cat. No. 5627
GUIDE UNIT ONLY(HPTM & HPTM WLS®) Cat. No. 5638
(HPTM ABS) Cat. No. 5632
•
•
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 12:00 Page 31
Die Shims and Slug Ejectors
32 UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Die ShimsStation Quantity Cat. No. Price
0.25mm Thick – Individually
12.7mm (A) 1 2101
31.75mm (B) 1 2097
50.8mm (C) 1 2089
88.9mm (D) 1 2081
114.3mm (E) 1 2073
0.25mm Thick – Package
12.7mm (A) 25 2208
31.75mm (B) 25 2209
50.8mm (C) 10 2210
88.9mm (D) 5 2211
114.3mm (E) 5 2212
0.75mm Thick – Individually
12.7mm (A) 1 2721
31.75mm (B) 1 2723
50.8mm (C) 1 2725
88.9mm (D) 1 2727
114.3mm (E) 1 2729
0.75mm Thick – Package
12.7mm (A) 25 2722
31.75mm (B) 25 2724
50.8mm (C) 10 2726
88.9mm (D) 5 2728
114.3mm (E) 5 2730
1.5mm Thick – Individually
12.7mm (A) 1 2104
31.75mm (B) 1 2100
50.8mm (C) 1 2092
88.9mm (D) 1 2084
114.3mm (E) 1 2076
1.5mm Thick – Package
12.7mm (A) 25 2172
31.75mm (B) 25 2173
50.8mm (C) 10 2174
88.9mm (D) 5 2175
114.3mm (E) 5 2176
Slug EjectorsSquare Urethane
Hole Diameter in Punch Quantity Cat. No. Price
3.2mm 50 6116
4.8mm 50 6117
9.5mm 50 6118
12.7mm 50 6119
Assortment 50 6410
Punch ShimsStation Quantity Cat. No. Price
Individually
12.7mm (A) 1 1898
31.75mm (B) 1 1899
Package
12.7mm (A) 25 2167
31.75mm (B) 25 2168
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 12:00 Page 32
Non Standard Keying
33UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Standard Keying, plus extra pins or keys for shapes at 45° increments
Punches Dies
Available Options Add On Price
12.7mm (A) Not available Not available Not available Not available per key
31.75mm (B)0° & 45° 0° & 45° per key
0° & 180° 0° & 180° per key
50.8mm (C) 45° Increments per pin 45° Increments per key Not applicable
88.9mm (D) 45° Increments per pin 45° Increments per key Not applicable
114.3mm (E) 45° Increments per pin 45° Increments per key Not applicable
Available Options Add On Price
Front of Machine
This key location matches Amada’s®
turret punch press programming method.
Die View
Front of Machine
Wilson Tool’s keying diagram.
Example
Shape at 23˚
When ordering shapes at non-standard angles, use the diagrams below to eliminate any confusion.
Die View
Station Guides or Strippers
Shape at single angles other than standard(Note: No additional charge on A & B Stations
for shape at 45° increments)
Station Punches Dies Guides or Strippers
12.7mm (A) No Charge No Charge
31.75mm (B) Not Applicable
50.8mm (C) Not Applicable
88.9mm (D) Not Applicable
114.3mm (E) Not Applicable
Standard Keying, plus extra pins or keysfor shapes at other than 45° increments
Station Punches Dies Guides or Strippers
12.7mm (A) Not Available Not Available per key
31.75mm (B) Not Available Not Available per key
50.8mm (C) per pin per key Not Applicable
88.9mm (D) per pin per key Not Applicable
114.3mm (E) per pin per key Not Applicable
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 12:00 Page 33
Shear Options
34 UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
% x Material Thickness=Total Clearance
Type of Shear Benefit Limitation
Rooftop
Concave or DoubleConcave
Inverted Rooftop
Double Valley Shear
JK Shear
Best shear for punchingat maximum tonnages.
Best shear for nibblingbecause it inverts stresses.
Also good shear for nibblingbecause it inverts stresses.
Best shear for nibbling whenshape is long and narrow.
A special punch tip shear thatallows you to punch highstrength materials with areduced risk of breakage.
When nibbling, bite must be 75% ofpunch dimension or excessive sideloading will result.
The punch is less resistant to breakagewhen punching at high tonnages be-cause of inverted stresses.
More susceptible to breakage becauseof a sharp focal point for stresses –use with great care.
The punch is less resistant to breakagewhen punching at high tonnages be-cause of inverted stresses.
Can only be used on punches up to25.4mm diameter or 'A' dimension*.
Special Shears
Station
Inverted Rooftop Double Valley
Single Concave Double Concave
1.6mm Shear 3.2mm Shear 1.6mm Shear 3.2mm Shear
31.75mm (B) Within 31.75mm N/A N/A
50.8mm (C) Within 50.8mm
88.9mm (D) Within 88.9mm
114.3mm (E) Within114.3mm
‘A’ Dimensions*
JK ShearShape
Round
Rectangle, Square, Hexagon
Single ‘D’, Double ‘D’
Obround
NotesIf specified: 3.2mm maximum rooftop shear can be given at N/C for any round or shape in 50.8mm (C), 88.9mm (D) or 114.3mm (E).For rooftop shear on any round or shape in 12.7mm (A) or 31.75mm (B) stations, add•1.6mm rooftop shear is given to all punches with 'A' dimension* greater than 50.8mm and width greater than 6.35mm at no extra charge. All punches 6.35mmand under in width will be shipped with no shear unless specified.*'A' Dimension = longest distance across shape.**NOTE: In some instances, inverted rooftop is substituted for single and double concave shears.
Add on Price
Die Clearance Selection Information% Total Clearance
Material Minimum Best Maximum
Copper, 1/2 Hard 8 12 16
Brass, 1/2 Hard 6 11 16
Mild Steel 10 15 20
Steel 0.50C 12 18 24
Aluminium, Soft 5 10 15
Stainless Steel 15 20 25
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 12:00 Page 34
Add Ons
35UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
12.7mm (A) Station Add Ons
Small Widths0.79 - 1.0mm
Clearance< 0.10mm
Small Diameter0.79 - 1.50mm
Clearance< 0.10mm
Punch
Punch
Stripper
N/C
StripperN/CN/C
Die
Die
Add ons for Shapes
Add ons for Rounds
Add to round or shape punch for extra straight before radius, extra back taper, or no back taper.
Stubby Style (A) StationNote: Must usestubby style dieand guide with
stubby style punch
Punch Die
Use Standard Punchand Die Price Plus:
Round(2.3mm max dia.) addShape add
Round addShape add
31.75mm (B) Station Add Ons
Small Widths0.79 - 1.0mm
‘A’ Dimension< 11.10mmClearance< 0.10mm
Small Diameter0.79 - 1.50mm
Clearance< 0.10mm
Punch
N/C
Punch
Stripper
N/CN/C
StripperN/CN/C
Die
Die
N/C
Add ons for Shapes
Add ons for Rounds
Add to round or shape punch for extra straight before radius, extra back taper, or no back taper.
50.8mm (C) Station Add Ons
Small Widths0.79 - 1.0mm1.01 - 2.34mm
Small ‘A’ Dimension< 29.21mm29.22 - 31.72
Clearance< 0.10mm
Small Diameter< 25.4mm
Clearance< 0.10mm
Punch
N/C
Punch
Stripper
N/CN/CN/CN/C
StripperN/CN/C
DieN/C
Die
N/CN/CN/C
Add ons for Shapes
Add ons for Rounds
Add to round or shape punch for extra straight before radius, extra back taper, or no back taper.
88.9mm (D) Station Add Ons
Small Widths0.79 - 1.0mm1.01 - 2.34mm
Small ‘A’ Dimension< 48.26mm48.27 - 50.77mm
Clearance< 0.10mm
Small Diameter48.26mm
48.27 - 50.77mmClearance< 0.10mm
Punch
N/C
Punch
Stripper
N/CN/CN/CN/C
StripperN/CN/CN/C
DieN/CN/C
Die
N/CN/CN/C
Add ons for Shapes
Add ons for Rounds
Add to round or shape punch for extra straight before radius, extra back taper, or no back taper.
114.3mm (E) Station Add Ons
Small Widths0.79 - 1.0mm1.01 - 2.34mm
Small ‘A’ Dimension< 86.36mm86.37 - 88.87mm
Clearance< 0.10mm
Small Diameter< 86.36mm
86.37 - 88.87mmClearance< 0.10mm
Punch
N/C
Punch
Stripper
N/CN/CN/CN/C
StripperN/CN/CN/C
DieN/CN/C
Die
N/CN/CN/C
Add ons for Shapes
Add ons for Rounds
Add to round or shape punch for extra straight before radius, extra back taper, or no back taper.
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 12:00 Page 35
Wilson Xtra Accessories Range
36 UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Wilson Xtra Catalogue
As the acknowledged world leader in Punch Pressand Press Brake Tooling, we are supplying systemsto many new users worldwide who have realisedthat ‘tooling makes the machine’, wishing to takeadvantage of our numerous cost savinginnovations as well as superior quality tooling.
In addition to being the solution to your toolingrequirements, we are now proud to present ournewWilson Xtra Catalogue; a wide andrapidly-expanding range of products specificallytailored to enable you to source the right tool forthe job or the right accessory for your machine.From storage units and cabinets to lubricants,machine clamps to circlip pliers, all this isavailable with just a phone call to our Sales Desk,a quick fax or a visit to our website atwww.wilsontool.co.uk
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 12:00 Page 36
Notes
37UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 12:00 Page 37
W
United KingdomEuropean HeadquartersStirling Road, South MarstonIndustrial Estate, Swindon, WiltshireSN3 4TQ, United KingdomTel (Free): 0800 373748Tel: +44 (0)1793 831818Fax (Free): 0800 373758Fax: +44 (0)1793 831945email: [email protected]
FranceBat B, 51 Rue d’Ourdy,77550 Réau, FranceTel: (Gratuit) 0800 10 29 00Tel: +33 (0)1 64 13 47 80Fax: (Gratuit) 0800 10 40 14Fax: +33 (0)1 64 13 47 81email: [email protected]
GermanyGottlieb Daimler Str 231552 Rodenberg, GermanyTel: (Frei) 00800 945 766 8665Tel: +49 (0)5723 747 0Fax: (Frei) 00800 945 766 329Fax: +49 (0)5723 747 10email: [email protected]
ScandinaviaEjby Industrivej 40DK-2600 Glostrup, DenmarkTel (Free): 80 20 20 24Tel: +45 44 53 16 99Fax (Free): 80 20 20 26Fax: +45 44 53 06 07email: [email protected]
email: [email protected]
Visit us online at: www.wilsontool.com
United StatesWorldwide Headquarters12912 Farnham AvenueWhite Bear Lake, MN 55110 USATel (Free): 800 328 9646Tel: (651) 426 9133Fax (Free): 800 222 0002Fax: (651) 426 9134email: [email protected]
ArgentinaWilson Tool International(r), ArgentinaVon Wernicke 3041 PBSan Isidro, 1642 Buenos AiresArgentinaTel: +54 114 7634004Fax: +54 114 5084190email: [email protected]
ChinaNo. 6 Building of 584018 Lane Huaning RoadXinhuang Industry Park201108 Shanghai, ChinaTel: +86 21 51089638Fax: +86 21 64422195email: [email protected]
MexicoThe Wilson Company SRL de CVBLVD. Diaz Ordaz no 140 piso 20Col. Santa MariaMonterrey, Nuevo LeonMexicoC.P. 64650Tel: 52 (81) 8865 4820Fax: 52 (81) 8865 4599
South AfricaWilson Tool South Africa LimitedRynhurst Business Park156 Pretoria Road, RynfieldBenoni, 1501, GautengRepublic of South AfricaTel: +27 877 217 875Fax: 086 657 8629email: [email protected]
WILSON TOOL INTERNATIONAL (EUROPE) LTD
Wilson Tool International Ltd - April 2011
HP_Standard_Thick Turret_2011 (no prices):HP_Standard_Thick Turret 12/5/11 11:58 Page 1
www.wilsontool.ro
Distribuitor:
S.C. SM TECH SRL
Tehnologii şi soluţii pentru industria prelucrării tablelor
Tel: 0040-331-401599 Tel/Fax: 0040-231-515702 Tel Mob: 0040-745-528494
E-mail: office (at) sm-tech.ro Web:
www.sm-tech.ro www.wilsontool.ro
Vă stăm la dispoziţie cu plăcere cu orice informaţie sau ofertă pentru scule
Wilson Tool destinate maşinii d-voastră de ştantat CNC sau presei d-voastră abkant