widespan - midwest retail | midwest retail services(ws1291 or ws9111 pg.706) depending on the beam...
TRANSCRIPT
703
P.O. BOX 3448 • OMAHA, NEBRASKA 68103-0448 • (800) 228-9882This is a copyrighted work of Lozier Corporation. Any unauthorized reproduction, distribution or use is expressly prohibited. © 2013 Lozier® Corporation
3/13/13
Hand Loader/Stacker Fork Lift
Widespan
• Includesfourbasiccomponents: UpriteFrames Beams ShelfSupports Shelves
Widespan:
• Clearopeningbetweenposts: Nominalshelfwidthplus1/2”• Overalllength: (Nominalsectionwidth+1/2”)timesthenumberof sections,+13/4”foreachpostintherun• Overalldepth: 21/4”greaterthanthenominaldepthoftheunit• Verticalclearancebetweenshelves: RegularDutyBeam: 31/4”lessthanthecenter-to-centershelfspacing HeavyDutyBeam: 43/4”lessthanthecenter-to-centershelfspacing• Shelvesadjustable2”oncenter• Nocrossbracingrequired• WeldedUpriteFrame
Dimensional Information:
• Warning:• Forkliftsmustnotbeused,• Onlyhandloader/stackercanbesafelyused• Order“RE”ReinforcedUpriteFrameswhen usinghandloader/stacker• Shelfsupportsarerequiredforallapplicationstostabilize beam,ifnotusedthenbeamlockingclipisrequired• AislesideUpritepostsmustbeanchoredtofloor• TotalweightofpalletizedgoodsMUSTNOTexceed onehalfofuniformlydistributedBeamcapacity• Allowatleast3”clearancebetweenpallet&UpriteFrame, atleast4”clearancebetweenpallets• PalletsshouldoverhangbothBeamsbyatleast2”, otherwiseParticleboardorWiregridShelvesmustbeused
Pallet Loaded Widespan Considerations:
Warning: Multi-FunctionBeamsareintendedtobeusedwithMulti-FunctionShelfSupports.IfShelfSupportsarenotinstalledthenthebeamsMUSTutilizeaWidespanMulti-FunctionBeamLockingClip(WS1291orWS9111pg.706)dependingonthebeamlocation.FailuretodothiscouldallowtheBeamtobecomedisengagedcausingproductdamageorpersonalinjury.
704
P.O. BOX 3448 • OMAHA, NEBRASKA 68103-0448 • (800) 228-9882This is a copyrighted work of Lozier Corporation. Any unauthorized reproduction, distribution or use is expressly prohibited.© 2013 Lozier® Corporation
6/1/10
Widespan UpritesUprite Frame
• “RE”Frameavailablein72”-120”H&alldepths (lowerFrameonlyon132”-192”)• Forusewithhandloader/stacker• Reduceschanceforframedamage• Channelweldedinsideeachpostinlower48”• Weldedfootplateforanchoring-1/2”hole• Forpricingseesection700,pg5-8
Reinforced Uprite Frames:
Reinforced Uprite Frame
• Upritepostslottedonface,allowshelfadjustment2”oncenter• SquareholespunchedonsidesofUpritepostforaccessories• AccessoryholesonfaceofUpritepunched6”oncenteralsoaidbeamplacement• TopCapsincludedoneachUprite• OneFramerequiredforeachsection,plusoneatendofeachrun• One-pieceUpritesfrom48”-120”• Two-pieceUpritesover120”(UpriteConnectorsincluded)• FloorAnchors,FloorProtectors,orBacktoBackConnectorsmay beordered(pg705-706)• Uniformlydistributedloadof10,000lb. (perUpriteframeat48”max.Beamspacing,vertically)• Add“SPC”topartnumberforadditionalpackagingtoprovideincreased protectionunderharshshippingconditions• Forpricingseesection700,pg1-4
Uprite Frame:
EXaMPLE ParT nO.
WSU=WidespanUprite 18 =Depth:18”,24”,30”,36”,42”,48” 048 = Height:48”,60”,72”,84”,96”,120” Options: RE =ReinforcedUpriteforhandloader/ stackerapplications SPC= Additionalpackaging
WSU 18 048
StandardFiniSh:
• OptionalTierI&IIcolors
PLT
EXaMPLE ParT nO.
WSU=WidespanUprite 18 =Depth:18”,24”,30”,36”,42”,48” 144 = Height:132”,144”,156”,168”,192” Options: RE =ReinforcedUpriteforhandloader/ stackerapplications SPC= Additionalpackaging U = Unit (twoUpriteFrames&twoWSUC.GLV)
WSU 18 144 U
One Piece Uprite
Two Piece UpriteStandardFiniSh:
• OptionalTierI&IIcolors
PLT
Uprite Connector
• UsedtoextendneworexistingUpriteFrames• Includedwith:two-pieceUpriteFrames(132”-192”)• TwoConnectorsrequiredperUpriteFrame(front&rear)• Forpricingseesection700,pg9
Uprite Connector:
ParT nO.
WSUC
StandardFiniSh:
• Galvanized
GLV
705
P.O. BOX 3448 • OMAHA, NEBRASKA 68103-0448 • (800) 228-9882This is a copyrighted work of Lozier Corporation. Any unauthorized reproduction, distribution or use is expressly prohibited.
3/18/13© 2013 Lozier® Corporation
ParT nO.
WS1321
Back-to-Back Connector
Floor Protector/Shim
• RecommendedonbacktobackWidespanruns• Oneattop&oneatbottom• DesignedtospaceUprites21/4”aparttoallow clearanceforadjustmentofbackBeams• Bottomconnectorcanbeomittedif FloorAnchorsorShimsareused• Forpricingseesection700,pg9
Back-to-Back Connector:
ParT nO.
WS1231
• 1/16”thicksteelpadprotectsfloorsunderposts• TworequiredperUpriteFrame• Padswillstacktoshimframesonunevenfloors• Forpricingseesection700,pg9
Floor Protector/Shim:
ParT nO.
WS1251
Extra Top Cap• TrimtopofUprites• IncludedwithnewUprites• Forpricingseesection700,pg9
Extra Top Cap:
Widespan Accessories
StandardFiniSh:
• Galvaneal
GVN
StandardFiniSh:
• Galvanized
GLV
StandardFiniSh:
• Galvanized
GLV
706
P.O. BOX 3448 • OMAHA, NEBRASKA 68103-0448 • (800) 228-9882This is a copyrighted work of Lozier Corporation. Any unauthorized reproduction, distribution or use is expressly prohibited.
3/18/13© 2013 Lozier® Corporation
Floor Anchor• HeavygaugesteelanglefastensUpriteFrametofloor• Requiredwhenheight-to-depthratioexceeds6to1• Useasrequiredtomeetseismicanchoringspecifications• IncludesUpritemountingbolt,flooranchornotincluded• Forpricingseesection700,pg9
Floor Anchor:
ParT nO.
WS1241
• UsedforallbeamlocationsotherthanthetopofUprite• SnapintoUpriteslotstopreventBeammovement• UsedateachendofBeamortwoadjacentBeamsinsameslot• MustbeusedwhennotusingShelfSupports(WSSS)• Forpricingseesection700,pg9
Beam Locking Clip:
ParT nO.
WS1291
ParT nO.
WS9111
Beam Locking Clip(for intermediate Uprite slots)
Beam Locking Hardware(for top Uprite slots)
StandardFiniSh:
• StainlessSteel
STS
StandardFiniSh:
N/A
StandardFiniSh:
• Galvanized
GLV
9/16”
Widespan Accessories
• ForuseonbeamlevelsatverytopofUprite• BoltontoUpritetopreventBeammovement• UsedateachendofBeamortwoadjacent Beamsinsameslot• MustbeusedwhennotusingShelfSupports(WSSS)• Forpricingseesection700,pg9
Beam Locking Hardware:
707
P.O. BOX 3448 • OMAHA, NEBRASKA 68103-0448 • (800) 228-9882This is a copyrighted work of Lozier Corporation. Any unauthorized reproduction, distribution or use is expressly prohibited.
3/18/13© 2013 Lozier® Corporation
Widespan Shelf Assembly
EXaMPLE ParT nO.
WS = WidespanShelfAssembly SA = “SA”ParticleboardShelf “WA”WiregridShelf 24 = SectionDepth: 18”,24”,30”,36”,42”,48” 96 = SectionWidth:48”,60”,72”,84”,96” 2 = NumberofShelfSupports (Seebelowforloadchart) RD = Beam&ShelfSupportStyle: “RD”RegularDuty “HD”HeavyDuty
WS SA 24 96 2 RDStandardFiniSh:
PLT • Beams • OptionalTierI&IIcolors PLT • ShelfSupport • OptionalTierI&IIcolors N/A • Shelffinish • N/A(Uncoatedparticleboard) S04(Sealcoatedparticleboard) ZNC(ZincWiregrid)
PLT PLT N/A
• Includes: 2WidespanBeams 1WidespanShelf: ParticleboardorWiregrid NumberofShelfSupportsrequested (Seeloadchart)• Availableintwotypes: (loadcapacityperpairofBeamswith appropriateShelfSupports) RegularDuty:1,600-3,000lb. HeavyDuty:3,000lb.max.• Forpricingseesection700,pg10-17
Shelf Assemblies:
Shelf Assemblies
WiregridShelf
ParticleboardShelf
ShelfSupports
Beam
Beam
43/4”
5/8”1”
WidespanShelfCapacity(UniformlyDistributedLoad)
Section Depth
SectionWidth(BeamLength)
NumberofRegularDutyShelfSupportswithRegularDutyBeams
NumberofHeavyDutyShelfSupportswithHeavyDutyBeams
2 3 4 2 3
Upto36”D
48” 1,600 2,400 3,000 3,000 ---60” 1,600 2,400 2,400 --- 3,00072” 1,600 2,000 2,400 --- 3,00084” 1,600 1,800 2,000 --- 3,00096” 1,600 1,600 1,600 --- 3,000
42”D
48” 1,370 2,055 2,740 --- 3,00060” 1,370 2,055 2,400 --- 3,00072” 1,370 2,000 2,200 --- 3,00084” 1,370 1,800 1,600 --- 3,00096” 1,370 1,600 1,600 --- 3,000
Upto48”D
48” 1,200 1,800 2,400 --- 3,00060” 1,200 1,800 2,400 --- 3,00072” 1,200 1,800 2,000 --- 3,00084” 1,200 1,700 1,800 --- 3,00096” 1,200 1,600 1,600 --- 3,000
Beam Profiles
31/4”
5/8”1”
RegularDuty HeavyDuty
708
P.O. BOX 3448 • OMAHA, NEBRASKA 68103-0448 • (800) 228-9882This is a copyrighted work of Lozier Corporation. Any unauthorized reproduction, distribution or use is expressly prohibited.
3/18/13© 2013 Lozier® Corporation
EXaMPLE ParT nO.
WSPB = WidespanParticleboardShelf 18 = SectionDepth: 18”,24”,30”,36”,42”,48” 60 = SectionWidth:48”,60”,72”,84”,96” HD = HeavyDutyonly
WSPB 18 60 HD
• OneStylefitsbothRegularDuty&HeavyDutyBeams• Uniformlydistributedloadupto3,000lbs. (DependentonBeamstyle&numberofShelfSupports)• Particleboard: 5/8”industrialgradeparticleboard Sealcoatfinishavailableforadditionaldurability &stainresistance• Wiregrid: 3X3heavygaugewiremat Onepiececonstructiononallsizes Continuousperimeterwire Fireproof Providesfor: Lightpenetration Waterflowthroughforsprinklers Cleanliness Availableinzinccoatedwire• Forpricingseesection700,pg19-20
Widespan Shelves:
EXaMPLE ParT nO.
WSWG = WidespanWiregrid 18 = SectionDepth:18”,24”,30”,36”,42”,48” 96 = SectionWidth:48”,60”,72”,84”,96”
WSWG 18 96
Shelves
Widespan Components
StandardFiniSh:
• N/AUncoated• S04Sealcoated
N /A
StandardFiniSh:
• Zinc
ZNC
• AvailableinbothHeavyDuty&RegularDuty• Integralbeamconnectors• Tilt-indesignnofastenersorlockingclipsrequired whenusedwithShelfSupport(WSSS)• Minimumoffourbeamsrequiredpersection, Oneeach:top,bottom,front,&backofsection• ShelfSupportsrequiredtotieBeamstogether: minimumoneShelfSupporton48”&60”Beams ortwoon72”,84”,&96”ormustuse LockingClips(seepg.706).• Forpricingseesection700,pg18
Beam:
EXaMPLE ParT nO.
WSB = WidespanBeam 48 = Sectionwidth:48”,60”, 72”,84”,96”Optional: HD =HeavyDutyBeam (mustbeusedwithHDShelfSupport)
WSB 48
StandardFiniSh:
• OptionalTierI&IIcolors
PLT
Beam
• AvailableinbothHeavyDuty&RegularDuty• Rotatesintoplaceinsidebeambody• Minimumoneshelfsupportrequiredtosupport theshelf&totiebeamstogether• Numberofsupportsrequiredvariesbasedon requiredload(seetablepg707)• Forpricingseesection700,pg18
Shelf Support:
EXaMPLE ParT nO.
WSSS = WidespanShelfSupport 18 = UpriteFrameDepth: 18”,24”,30”,36”,42”,48”Optional: HD =HeavyDutyShelfSupport (mustbeusedwithHDBeam)
WSSS 18
StandardFiniSh:
• OptionalTierI&IIcolors
PLT
Shelf Support
709
P.O. BOX 3448 • OMAHA, NEBRASKA 68103-0448 • (800) 228-9882This is a copyrighted work of Lozier Corporation. Any unauthorized reproduction, distribution or use is expressly prohibited.
3/18/13© 2013 Lozier® Corporation
Extension Uprite
• WidespanstyleUpritewithreversed rearpost&weldedextensionconnectors• Unitsabletobeplacedagainstawallorback-to-back withadjustmentaccessibility,duetoreversedrearpost• Uniformlydistributedloadof6,000lb.perUpriteFrame• Forpricingseesection700,pg21-22
Extension Uprite:
EXaMPLE ParT nO.
BMEU = BulkMerchandiser ExtensionUprite 22 = SectionDepth:22”,34”,46” 036 = Height:36”or48”
BMEU 22 036StandardFiniSh:
• OptionalTierI&IIcolors
PLT
Bulk Merchandiser & Components
• Canbeusedasastandalonedeckforbulkproducts• Canbeusedtodisplayheavybulkproductwithaddition ofExtensionUprites&ShelfAssemblies• DeckAssemblyis4”H,availablein22”,34”,&46”D• ShelfAssemblyisavailablein48”or96”oncenter widthstolineupwithDisplayShelving
Bulk Merchandiser:
Bulk Merchandiser
EXaMPLE ParT nO.
BMBU = BulkMerchandiser BaseUprite 22 = SectionDepth:22”,34”,46” 4 = Height:4”
BMBU 22 4
StandardFiniSh:
• OptionalTierI&IIcolors
PLT
Base Uprite
• Neededtofinishacontinuousrunof shelvingincludingsinglesections• Forpricingseesection700,pg21-22
Base Uprite:
710
P.O. BOX 3448 • OMAHA, NEBRASKA 68103-0448 • (800) 228-9882This is a copyrighted work of Lozier Corporation. Any unauthorized reproduction, distribution or use is expressly prohibited.
3/18/13© 2013 Lozier® Corporation
Bulk Merchandiser Components
EXaMPLE ParT nO.
BMDS = BulkMerchandiser Deck/ShelfSupports 22 = SectionDepth:22”,34”,46”
BMDS 22
Shelf/Deck Supports
Deck Beam
Length ParT nO.
48” MFFB48
EXaMPLE ParT nO.
BMPBD = BulkMerchandiser Particleboard 22 = SectionDepth: 22”,34”,46” 48 = SectionWidth:48”or96”
BMPBD 22 48
Particleboard Shelf/Deck
StandardFiniSh:
• OptionalTierI&IIcolors
PLT
Shelf Beam
TyPESEcTiOn Width
ParT nO.
Front 48” MFFB48Front 96” MFFB96Rear 48” MFFB48REVRear 96” MFFB96REV
StandardFiniSh:
• OptionalTierI&IIcolors
PLT
• Includes: 1FrontBeam,1RearBeam, 3ShelfSupports,&1ParticleboardShelf• BeamlengthsmatchoncenterUprite spacingofDeckAssemblies• Uniformlydistributedloadof1,600lb.perassembly• Forpricingseesection700,pg21-22
Shelf Assembly:
EXaMPLE ParT nO.
BMSA = BulkMerchandiser ShelfAssembly 22 = SectionDepth: 22”,34”,46” 48 = Sectionwidth:48”or96”
BMSA 22 48
Shelf Assembly
StandardFiniSh:
PLT • Beam OptionalTierI&IIcolors PLT • ShelfSupportfinish • OptionalTierI&IIcolors N/A • Shelffinish N/AUncoated S04Sealcoated
PLT PLT N/A
EXaMPLE ParT nO.
BMDA = BulkMerchandiser DeckAssembly 22 = SectionDepth: 22”,34”,46” 48 = SectionWidth
BMDA 22 48
Deck Assembly• Includes: 1BaseUprite,2DeckBeams(MFFB_), 3ShelfSupportson22”&34”D, 4ShelfSupportson46”D, 1ParticleboardShelf• OrderoneBaseUpritetofinisheachcontinuousrun• Actualdepthis21/4”greatthannominal• Uniformlydistributedloadof2,400lb.per4’section• Forpricingseesection700,pg21-22
Deck Assembly:
ParticleboardShelf
RearShelfBeam
BaseUprite
DeckBeam
StandardFiniSh:
•N/AUncoated•S04Sealcoated
N /A
ParticleboardDeck
ShelfSupport
FrontShelfBeam
StandardFiniSh:
PLT • Beam&BaseUprite OptionalTierI&IIcolors PLT • ShelfSupportfinish • OptionalTierI&IIcolors N/A • Deckfinish N/AUncoated S04Sealcoated
PLT PLT N/A
StandardFiniSh:
• OptionalTierI&IIcolors
PLT
ShelfSupport
711
P.O. BOX 3448 • OMAHA, NEBRASKA 68103-0448 • (800) 228-9882This is a copyrighted work of Lozier Corporation. Any unauthorized reproduction, distribution or use is expressly prohibited.
3/18/13© 2013 Lozier® Corporation
Widespan Applications
• OrderWidespanUprites(pg704)• Ordershelflevelsasneededbelow• Includes: 2WSB18L(LowProfileBeam) 1WSSS30L(LowProfileShelfSupport) Particleboardshelf• Uniformlydistributedloadof400lb.per LowProfileBeamshelflevelwithoneshelfsupport• Forpricingseesection700,pg23
Low Profile Beam Shelf:Low Profile Beam Shelf
StandardFiniSh:
PLT • Beam OptionalTierI&IIcolors PLT • ShelfSupport OptionalTierI&IIcolors N/A • Particleboardfinish N/AUncoated S04Sealcoated
PLT PLT N/A
EXaMPLE ParT nO.
WSSA = WidespanShelfAssembly 30 = Section Depth 18 = SectionWidth:18” 1 = NumberofShelfSupports L = LowProfileBeam &LowprofileShelfSupport
WSSA 3 0 18 1 L
• InstallsintoBeamstoholdvarious HookDividers(pg406-407)• Canbeusedindividuallyorin combinationfordifferentlengthBeams• Forpricingseesection700,pg23
Divider Bars:Divider Bars
EXaMPLE ParT nO.
WSDB = WidespanDividerBars 48 = Sectionwidth:36”or48”
WSDB 48
nUmberoFdividerbarS
dividerbarLength beamLength
1 48” 48”1 48” 60”2 36” 72”
1ea. 36”&48” 84”2 48” 96”
StandardFiniSh:
• OptionalTierI&IIcolors
PLT
• Fitscustomersuppliedsignageupto5/16”thick• 2”HTop&bottomBeams,adjustin2”increments• 48”long• BeamLockingClipsrequired(pg.706)- WS1291orWS9111asrequired• Forpricingseesection700,pg23
Optional Canopy Beams:
beamtype ParT nO.
Upper WS6342Lower WS6352
Optional Canopy Beams
StandardFiniSh:
• OptionalTierI&IIcolors
PLT
2”
5/8”1”
712
P.O. BOX 3448 • OMAHA, NEBRASKA 68103-0448 • (800) 228-9882This is a copyrighted work of Lozier Corporation. Any unauthorized reproduction, distribution or use is expressly prohibited.
3/18/13© 2013 Lozier® Corporation
Widespan Applications
Front to BackBeamOffset
SectionDepth24” 30” 36” 48”
2” 5° 4° -- --4” 10° 8° 6° 5°6” 14° 11° 10° 7°8” 18° 15° 13° 10°10” -- 18° 16° 12°12” -- -- 18° 14°
Gravity Flow Product Angle
• 4°-10°RollerTracks(pg714)• 8°-11°SlideTracks(pg714)• 10°-18°Wiregrid(pg713)• Seepages713-714forproductapplications
Recommended product Angles by Gravity Flow option:
Tire Racks • 961/2”WinsideUpritepostsifusingWSB96• BeamLockingClipsrequired• OneShelfSupportrequiredtotiebeamstogether
Tire Racks:
Warning: Shelvingmustbeanchoredtoasuitablebuildingwall,tothefloor,orotherwisebracedtopreventoverturningwhenmerchandis-ingtallorheavyitemswhichleanagainsttheshelving.Theweightandforceofleaningitemsonunanchoredorunbracedshelvingmaycausetheshelvingtooverturnorcollapse.
STandard WidESPan cOMPOnEnTS ParT nO.
WSU_,Uprite pg.704WSB_,Beam pg.707WSSS_,ShelfSupport pg.707WS1241.GLV,FloorAnchors pg.705
WS1291.STS,BeamLockingClips pg.705
713
P.O. BOX 3448 • OMAHA, NEBRASKA 68103-0448 • (800) 228-9882This is a copyrighted work of Lozier Corporation. Any unauthorized reproduction, distribution or use is expressly prohibited.
3/18/13© 2013 Lozier® Corporation
Fronts
Gravity Flow Wire Shelves & Accessories
• WireShelfpowdercoatedforslickdurablefinish• InterchangeableWireFronts&Dividers• SelectFrontsizetallerthandisplayed product’scenterofgravity• Includes: 2RegularDutyWidespanBeams,Numberof ShelfSupportsasordered,&1Widespan GravityFlowShelf• Forpricingseesection700,pg24-25
Gravity Flow Wire Shelves:Gravity Flow Wire Shelves
StandardFiniSh:
PLT • Beams OptionalTierI&IIcolors PLT • ShelfSupport OptionalTierI&IIcolors PLT • WireShelf OptionalTierI&IIcolors
PLT PLT PLT
EXaMPLE ParT nO.
WSGWA = WidespanGravityWire ShelfAssembly 24 = SectionDepth: 24”,30”,36”,or48” 48 = SectionWidth:48”or96” 6 = VerticalBeamoffset: 4”,6”,8”,10”,&12”(seepage711) 2 = NumberofShelfSupports: (2shelfsupportson48”W) (3shelfsupportson96”W) R = RegularDutyBeams &ShelfSupportsonly 1 = Shelfwirespacing
WSGWA 24 48 6 2 R 1
Gravity Flow Shelf SupportsStandardFiniSh:
• OptionalTierI&IIcolors
PLT
• 1”wirespacingsupportssmallmerchandise• Powdercoatedforslickdurablefinish• Forpricingseesection700,pg25
Wiregrid:
Gravity Flow Wiregrid
EXaMPLE ParT nO.
WSGW= WidespanGravityFlow 24 = Section Depth: 24”,30”,36”,or48” 48 = Section Width:48”or96” 1 = ShelfWireSpacing
WSGW 24 48 1
Dividers • 3”H• Dividesmerchandise• Forpricingseesection700,pg25
Gravity Flow Wire Dividers:
EXaMPLE ParT nO.
WSGFD = WidespanGravity FlowDivider 24 = SectionDepth: 24”,30”,36”,48”
WSGFD 24
StandardFiniSh:
• OptionalTierI&IIcolors
PLTStandardFiniSh:
• OptionalTierI&IIcolors
PLT
• Retainproduct• 3”&6”heights• SelectFrontsizetallerthan displayedproduct’scenterofgravity• Forpricingseesection700,pg25
Gravity Flow Wire Fronts:
EXaMPLE ParT nO.
WSGFF = WidespanGravityFlowFront 4 = Width:48”(ordertwofor96”W) 3 = Height:3”or6”
WSGFF 4 3
StandardFiniSh:
• OptionalTierI&IIcolors
PLT
EXaMPLE ParT nO.
WSGSS = WidespanGravity ShelfSupport 24 = SectionDepth: 24”,30”,36”,48” 6 = VerticalBeamOffset: 4”,6”,8”,10”,12”
WSGSS 24 6
(Seepg711forrecommendedoffset)
714
P.O. BOX 3448 • OMAHA, NEBRASKA 68103-0448 • (800) 228-9882This is a copyrighted work of Lozier Corporation. Any unauthorized reproduction, distribution or use is expressly prohibited.
3/18/13© 2013 Lozier® Corporation
• Upritespg704• Beamspg708• OneTrackretainer,WS111_,perbeam• Twoendtracksperbeam(RollerorSlide)• Requiredcenterordividertrracks(RollerorSlide)
To Order: Gravity Flow Slides or Rollers
• Channelpunched1”oncenter• LayinsideBeambody• OnerequiredperBeam• Forpricingseesection700,pg26
Track Retainer:Track Retainer
Width ParT nO.
48” WS111372” WS1115
StandardFiniSh:
• OptionalTierI&IIcolors
PLT
EXaMPLE ParT nO.
WS = Widespan S = “S”Slide “R”Roller C = “C”CenterTrack “D”DividerTrack(Rolleronly) “E”EndTrack 24 = SectionDepth:24”,30”,36”,48” 6 = VerticalBeamoffset:2”,4”,6”,8” (seepg711forrecommendedoffsets)
WS S C 24 6
Gravity Flow Roller Racks & Accessories
StandardFiniSh:
• OptionalTierI&IIcolors
PLT
• Hat-shapedchannel• FormedtabdropintoTrackRetainer• SlideTrackincludesvinylrails• RollerTrackIncludesrollers• Forpricingseesection700,pg26
Tracks:
“C”“E”
Slide Tracks
“E”“C” “D”Roller Tracks