FOR ALL YOUR METAL FABRICATION NEEDS. CALL TODAY!

519-653-600020 LINDSAY ROAD, CAMBRIDGE, ONTARIO N1R 7K6 \ WWW.VERIFORM.CA

WHEN YOU ABSOLUTELY NEED IT DONE RIGHT.

Precision Metal Fabrication Solutions Since 1996

LARGE PARTS - 20-FOOT BENDINGSMALL PARTS

COMPLEX PARTS - 21-BEND PART

Penny shown for scale only

Engineering Assistance » Full CAD/CAM and Solidworks » Parasolid expertise » Formed parts flattening » Design/FMEA and Prototyping » Custom Tooling Design

Laser and Plasma Cutting » We cut up to 3.0” thick steel, 1.25” thick stainless and 1.0”

thick aluminium » Both High Definition Plasma and Laser Cutting » Steel edges weldable without edge cleaning when plasma cut

10 Foot Wide Rolling » Structural: bars, channels, angles, tube

and pipe into rings and ring segments » Plate and Sheet: cylinders, segments,

helixes, cones; concentric or eccentric » Transitions: Radius forming to your

template, to multiple profiles including tangents, angles, channels, hat channels, square to rounds, rectangle to round, obrounds, and more

20 Foot Wide Bending - Forming » Up to 20 foot long » 5 CNC brake presses » 90-degree punches and dies » Cone and tapered parts forming » Box forming die set » Goose neck punches » Hemming and offset bending » Radius and Rib forming dies » Urethane and U shape special tooling » Over $1 million in tooling for forming nearly anything!

Metal Fabricating Solutions – ISO 9001-2008 Registered

20 Foot Long Machining Centre » Multi-station Machining » Plate, Structural and Rounds » Drilling up to 1.5” diameter » Tapping up to M40 thread » Countersinking » Boring and Milling » Slotting, Beveling

Welding - CWB CSA 47.1 Division 2 and CSA W59 » Our CWB certified seam welders are capable of welding large and long

parts on our Bluco tables » Welders can Mig weld or Tig weld any shape that can be

slipped over a mandrel » In-House CWB Certified Weld Supervisor

and retained Welding Engineer to ensure quality throughout the welding process

• Welding Processes available: SMAW, GTAW, GMAW, GMAW-P

• Multiple Welding Stations: Bluco Demmeler and Weldsale welding tables up to 15 x 30 foot

» Meta-Lax Stress Relief System• Vibratory Stress Relieving of Weldments up

to 40,000 lbs.• Ideal for relieving

thermally induced stresses

• Data graph printout, documents the results of each part – Unit is portable

Metal Fabricating Solutions – ISO 9001-2008 Registered

Rev

13-2

015

CNC Hi-Resolution Plasma Cutting(Laser Like) +/- 0.8 mm accuracy

From 18ga to 3” thick x 18 foot x 40 foot table

Stainless, aluminium and steel cutting

CNC Laser Cutting(2 systems)

Up to 3⁄4” x 80” x 160” (4000W) +/- 0.005” accuracy

CNC Punch/Laser Up to 0.25” x 72 x 144”

CNC Bending/Brake Forming(2 systems)

900 Ton 7-Axis CNC Bending 1.25” plate x 20 foot long

350 Ton 7-Axis CNC Bending 1/2” plate x 14 foot long

180 Ton 7-Axis CNC Bending 5/16” plate x 10 foot long

165 Ton 9-Axis CNC Bending 1/4” plate x 10 foot long

125 Ton 3-Axis CNC Bending 1” plate x 18” long

56 Ton X 48” very economical bending for small parts

Over $1 million press brake tooling in stock allows us to bend more shapes than any other fabricator

Special bend tooling produced in 48 hours using VeriForm’s patented design

CNC ShearingUp to 1/2” X 144” with 48” CNC Backgauge

CNC PunchingUp to 1.5” dia. in 1” plate

Welding — Assembly — PaintingCWB Welding CSA 47.1 Division 2 and W59 – MIG/TIG/ Spot Welding

In-House CWB Certified Weld Supervisor and retained Welding Engineer

Assembly – Electronics, Controls, Dashboards

Painting – Primer and Finish Quality Painting (Acrylic and Epoxy)

Paint Booth – 20 foot deep x 12 foot high and 12 foot wide capacity

RollingUp to 5/16” thick x 120” wide rolling

As low as 22ga x 2.50” diameter

20 Foot Long Machining CentreHeavy Duty Drilling, Tapping, Reaming

Counterboring, Beveling, Flow Drilling, Routering

Plastic, Aluminium, Stainless Steel, Wood

Plate, Structural & Round

Quality and CertificationsISO 9001-2008 Registered as of 2004

ISO 50001:2001 as of 2013

Specialty ServicesPemsert Insertion Nuts + Studs – #6 to 3/4” UNC/ M20 size

BTM Clinching – To 0.35” total – No heat or damage to material surface finish

Beveling – Up to 3⁄4 x 45 degrees Pullmax Heavy Duty Beveler – 2 machines

Part Number Stamping – Production Stamping of Letters/Numbers

Automatic Band Saw – up to 12” wide bundles by 28” indexing

Stainless Passivation to ASTM A967 and A380 Specification

Large Part Capability(7 cranes)

41,000 sq. foot of plant — 10 and 5 Ton Bridge Cranes full coverage

Numerous 2 and 1 Ton JIB Cranes plus 5 ton and 10 ton bundle lifters

6,000 and 8,000 lb. Forklifts with 60” forks

Stainless Passivation to ASTM A967 and A380 Specification

Precision PrototypingAs little as 24 to 48-hour turnaround

Support SystemsFull MRP and Job Management System (JOBBOSS™)

Data collection and Barcoding for real-time information

CAD Systems - Solidworks™, Solidedge™, AutoCAD™

20 Lindsay RoadCambridge, Ontario N1R 7K6

Phone: 519-653-6000Fax: 519-653-1016Email: info@veriform.ca

WHEN YOU ABSOLUTELY NEED IT DONE RIGHT.WWW.VERIFORM.CA

VERIFORM EQUIPMENT & CAPABILITIES ISO 9001 REGISTERED

Copyright ©2015 VeriForm Inc. All rights reserved.