what is the center program? - pniglobal.compniglobal.com/cctv/dvr/diginetcenter.pdf · ksr center...

Center program is a software used access to Digital Video Recorder(DVR) TCP/IPnetwork, telephone line or ISDN line. In this manual the computer with the Centerprogram is referred as “The Center” and the remote DVR is referred as “The Site”.

• CPU: Celeron 433MHz or higher• Memory: 64MB or higher• VGA Card: AGP 16MB or higher• HDD: 100MB or more spare space• O/S: Windows98 SE, Windows ME, Windows 2000, Windows XP• Communication Line: Modem, LAN, ISDN, Leased Circuit• DirectX: V7.0 or higher

What is The Center Program?

PC System Specification (Recommended)

Table of Contents

1. KSR Center User Manual1. Installation ……………………………………………………32. Loading Center Program……………………………………63. The Initial Screen ……………………………………………74. Center Program Setup ………………………………………85. Connecting To Site …………………………………………12

5.1 Connecting To Site Using LAN …………………………………135.2 Connecting To Site Using PSTN/ISDN ……………………………15

6. To View Live Images ………………………………………187. Search Saved Data …………………………………………19

7.1 Select Time and Data for Searching ………………………………207.2 Intelli Search …………………………………………………217.3 Playback The Stored Data ………………………………………227.4 Zooming in / out and Moving ……………………………………237.5 Image Adjustment………………………………………………247.6 Audio playback…………………………………………………257.7 Printing ………………………………………………………26

8. Pan/Tilt Control Mode………………………………………288.1 Pan/Tilt Control ………………………………………………29

9. Site Setup ……………………………………………………309.1 Camera/Sensor/Control Setup ……………………………………31

9.1.1 For KSR204, KSR304M, 404 Models ……………………………319.1.2 For KSR509, KSR516, KSR816Models …………………………32

9.2 Backup Schedule Setup …………………………………………339.2.1 Adding Backup Schedule ……………………………………34

9.3 Motion Detection Setup …………………………………………35

After purchasing KSR Center Program, please check that the following componentsare included in the box. If any of the contents are missing, contact your dealer.

Contents

User’s ManualKSR Center Program Installation CD

1. Installation

2. Loading Center Program

3. The Initial Screen

4. Center Program Setup

5. Connecting To Site

6. To View Live Images

7. Search Saved Data

8. Pan/Tilt Control Mode

9. Site Setup

10. Snnaappsshhoott 실실행행

11. Searching Backup Data

12. Data Backup

13. Backup Server

14. Intelli Upgrader

1. KSR Center User’s Manual

Contents

9.4 Network Setup …………………………………………………3812. Snapshot 실실행행 ……………………………………………3911. Searching Backup Data …………………………………4112. Data Backup ………………………………………………43

12.1 Floppy Disk Backup……………………………………………4412.2 KDB Backup and AVI Backup …………………………………47

13. Backup Server ……………………………………………4913.1 Change Password ……………………………………………5013.2 Backup Log …………………………………………………50

14. Intelli Upgrader ……………………………………………52

14.1 Running Intelli Upgrader ………………………………………52

14.2 Remote Upgrade ……………………………………………53

Chapter 2. Appendix1. PSTN/ISDN (without a Router) PPP Setup ………………57

2. Manual ISDN Setup without a Router ……………………59

1

3

1. KSR Center User s Manual1. Installation

1. Installation

1. Insert the Center Program CD into CD driver and move to folder “KSR Center\Data 1”on the CD

2. Double click on “setup.exe” to run the Setup program

1

5


1

4


3.Click on [Next] button.

4. Check the box "I accept the License Agreement" and click on [Next] button.

5.Enter the path to install the KSR Center program, and click on [Next] button.

6. The program is being installed.

7. After the program is completely installed, click on [Finish] button.

8. On the desktop "KSR Center", "KSR Remote Backup Server" and "KSR Intelli Upgrader"icons will be created as shown below.Double-click on "KSR Center" icon to run the Center program.

1

7

1. KSR Center User s Manual

1

6


2. Loading Center Program

1.Double-click on "KSR Center" icon on the desktop to load the Center Program.

2.Password is required to run the Center Program. By default no password is set up,just click [OK] to continue.

Password Inquiry Box

! To change the password, refer to Page 11.

3. The Initial Screen

① [Date/Time] displays the current date and time. ② [Live]: Click to shows the live video from the Site. ③ [Search]: Click to search over the data stored on the Site (when the Site is

connected);Click to search over the data stored on the Center PC (when the Siteis disconnected)

④ [Setup]: Click to configure the Site (when the Site is connected);Click to configure the Center Program (when the Site is disconnected);

⑤ [Connect]: Click to connect to the Site. ⑥ [Disconnect]: Click to disconnect from the Site.⑦ [Tx/Rx Status] This box displays data transmission status between the Site and the

Center. ⑧ [Quit]: Click to exit from the Center Program.⑨ [Site Info] displays the Site's information e.g. the Site's name, the IP address (if Site-

Center connection type is LAN), the telephone number (if Site-Center connectiontype is PSTN/ISDN)

Initial Screen

1

234

5

6

7

89

3. The Initial Screen2. Loading Center Program

1

9

1. KSR Center User s Manual4. Center Program Setup

1

8



Setup

① Click on [Setup] to open the setup'sscreen for the Center Program (theSite must be disconnected)

②The setup's screen is shown on theleft.Click on [OK] button to save thesettings you changed and return tothe initial screen.Click on [Cancel] to return to theinitial screen without saving thesettings that have been changed.

1

Setup Configuration

①[Preservable]

�The Center will keep trying to connect to theSite during the time specified in the[Preservable] box. 60 seconds is minimalvalue you can set here.

②[Display sensor/control bar]

�Check the box to display Status Bar of theSite's sensors and controls on the initialscreen.

③[Live screen data save]

�Check the box to save the live image fromthe Site to the local hard disk in the CenterPC. Later you will be able to search over thedata after disconnection from the Site.

④[Remote search data save]

�Check this box if you want to save data tothe local hard disk in the Center PC duringa remote search session. Later you will beable to search over the data afterdisconnection from the Site.

⑤[Select drive]

�Select a local hard disk drive to save datafor and

⑥[Water Mark Setp]

�검색 상에 워터마크 인증을 설정할 수 있

습니다.

2

3

4

5

6

1

☞ [Note] Types of storage media Hard disk or removable drives (DVD-RAM,ZIP, MOD, ORB, USB HDD) as well asremote network drives can be used to storedata.


3 4

1

11


1

10


Modem

①[Connection type]

Select the type of Site-Center connection:�For a normal telephone line or ISDN line

(without a router), select "PSTN/ISDN (NoRouter)."

�For LAN,ADSL or leased circuit (with a router),select "LAN/ISDN Router/Leased circuit -Router"

②[Installed modem name]

③[Initialization string]

④[Port and Bps]

The Center Program will read the modemsettings (modem type, initialization string, portand bps) from MS Windows and display here.

1

2

3

4

1

2

3

4

4

Others

① [Password change]

Click on [Password change] to changethe password:

• Enter the current password, and clickon [OK]

② [Date display format]

Scroll [Date display format] to change the date display format

③ [Language]

해당 나라의 언어를 선택하신 다음에 [Save]버튼을 클릭 후 감시화면으로 전환시키면 선

택하신언어로적용됩니다.

④[Setting up]

Click on [Setting up] to save the date displayformat.

⑤ [OK/Cancel]

Click on [OK] button to return to the initial screen saving the changes. Click on [Cancel] to return to the initial screen without saving.

• Enter the new password, and click on[OK].

☞ [Note] PPP Setup with a PSTN/ISDNModem- For communication using aPSTN/ISDN modem, separate PPPsetup needs to be done(refer to theAppendix).

- PSTN/ISDN modem connection isnot available for European countries.

1

13

1. KSR Center User s Manual5. Connecting To Site

1

12



① [Connect]

On the initial screen click on [Connect] to open "Site Connection" window (see 6.1 forLAN type of transmission and 6.2 for PSTN/ISDN type of transmission)

1

5.1 Connecting to Site using LAN

�[List of sites]: The list displays the registered sites, dividedinto groups for easy navigation.

� [Selected site info]: When a remote site is selected on [Listof sites], the site's info is displayed.

� [Site Search]: To find a site by site's type or site's nameClick on [Search] to start searching. The result is shownon the left ([List of sites])Click on [All Sites] to list all sites again on [List of sites]

� [Control][Add] Click to add a site to [List of sites] (to register a site)[Edit] Click to edit the site currently highlighted[Delete] Click to delete the site currently highlighted[Connect] Click to connect to the site currentlyhighlighted[Cancel] Click to close the window

� [Group]: Select the group where the Site belongs to� [Group Add]: Add a new group.� [Site Type]: Select KSR model installed at the Site. (KSR204,

304M, 404, 509, 516, 816)� [SITE Code]: Enter the Site's code here. It must be the same

as set at the Site. � [SITE Name]: Enter the user-friendly name for the Site. � [IP Address]: Enter the IP address of the Site. � [Password]: Enter the same password as set at the Site.� [Confirm]: Enter the same password as in

! [Warning]To be able to establish Site-Center connection, and must be the same at the Center and at the Site

A B

B

C

C

D

D

EF

GH

A


5.1.1. Add a new siteTo add a new site to the list click on [Add] to enter the site's information (group, type,code, name, IP address, and password to access) as shown on the picture below

D G

G

A

1

15


1

14


After editor, click on [OK] button to savechanges or [Cancel] to discard them.

The following box appears showingconnection progress:

5. 2 Connecting to Site using PSTN/ISDN

� [List of sites]: The list displays the registered sites, dividedinto groups for easy navigation.

� [Selected site info]: When a remote site is selected on [Listof sites], the site's info is displayed.

� [Site Search]: To find a site by site's type or site's nameClick on [Search] to start searching. The result is shownon the left ([List of sites])Click on [All Sites] to list all sites again on [List of sites]

� [Control][Add] Click to add a site to [List of sites] (to register a site)[Edit] Click to edit the site currently highlighted[Delete] Click to delete the site currently highlighted[Connect] Click to connect to the site currentlyhighlighted[Cancel] Click to close the window

5.2.1. Add a new siteTo add a new site to the list click on [Add] to enter the site's information (group, type,code, name, phone number, and password to access) as shown on the picture below

� [Group]: Select the group where the Site belongs to� [Group Add]: Add a new group.� [Site Type]: Select KSR model installed at the Site.

(KSR204, 304M, 404, 509, 516, 816)� [SITE Code]: Enter the Site's code here. It must be the same

as set at the Site. � [SITE Name]: Enter the user-friendly name for the Site. � [TEL Number]: Enter the phone number of the Site. � [Password]: Enter the same password as set at the Site.� [Confirm]: Enter the same password as in.

A

A B

H

CDEF

G

B

C

D

5.1.2. Edit a siteSelect a site you want to edit, and clickon [Edit] button.

5.1.3. Connect to a siteSelect a site to connect to, and click on[Connect] button.

5.1.4. Delete a siteTo delete a site, select it and click on[Delete] button.

5.1.5. Return to the initial screenClick on [Cancel] to close the window andreturn to the initial screen..

! [Warning]To be able to establish Site-Center connection, and must be the same at the Center and at the Site D G

G

A

1

16


1

17


When connection Site-Center is established, the following screen is displayed:After editing, click on [OK] button to savethe changes or [Cancel] to discard them.

The following box appears showingconnection progress:

5.1.2. Edit a siteSelect a site you want to edit, and clickon [Edit] button.

5.2.3. Connect to a siteSelect a site to connect to, and click on[Connect] button.

5.2.4. Delete a siteTo delete a site, select it and click on[Delete] button.

5.2.5. Return to the initial screenClick on [Cancel] to close the window andreturn to the initial screen.

1

19

1. KSR Center User s Manual7. Search Saved Data

1

18


6. To View Live ImagesTo view live images:

①After a site is connected, the list ofavailable cameras at the site isdisplayed here. Select cameras youwish to view live images from byclicking on the corresponding camerabuttons.

②Click on [Live] to see live images fromthe selected cameras.

In the following description we willrefer to this as "Live Mode".

Live images from cameras [1][2][3][4] at a site

1

2

7. Search Saved Data

Search Mode.screen

①[Search mode]

Click on [Search] to go to SearchMode. The Site must be connectedbeforehand.

②[Exit Search Mode]

Click on to exit Search Mode

1

2

To search

6. To View Live Images

1

21


1

20


7.1 Select Time and Date for Searching

①[Date-Time Panel]

On the Date-Time Panel pick up the date and time to search from

②[Daylight Saving Time]

If Daylight Saving Time is active, the timeline's color is pink.

If Daylight Saving Time is inactive, the color is yellow.

1

A

B

C

Month, year to search

Date to search (shows different colour code)

Red day : there are saved images on this day

White day : the day to search

Green day : no saved images on this day

Yellow day : today

Hour and minute to search

7. 2 Intelli Search

1

3

2 4

4ch

9ch

16ch

①[Scroll bar for cameras]Scroll to see all the available cameras at theSite.

②[Camera list]Click to select the cameras you wish to searchover. The selected cameras are highlighted.

③[Timeline]Timeline displays daytime in hourly basis.Clicking anywhere on it will change time scale(available: 1-hour, 30-minutes and 10-minutesper division).

④[Recording bars]Each camera has a recording bar in differentcolour, showing when and how the camera hasrecorded.Pink bar indicates Continuous Recording.Blue bar indicates Motion Recording.Red bar indicates Sensor Recording.

☞ [Tip]Screen will be empty if no image wasstored from the selected camera at theselected time.

56

Number of selected

Camera

1

1~4

1~9

1~16

Split mode

1 split mode (full)

4 split mode

9 split mode

16 split mode

Green bar indicates Pre Alarm Recording.No bar indicates that nothing was recorded.

⑤[Search Line]Search line indicates current position of therecording. The line can be dragged left andright by mouse to search over the recordeddata.

⑥ [Split Screen mode]

Select split screen mode for playing back.

2

1

23


1

22


7.3 Playback The Stored Data

1

23

① [Playback buttons]

Move to the first recorded data of theselected datePlaying one frame backwardReverse playbackStopForward playbackPlaying one picture forwardMove to the last recorded data of theselected date

② [SKIP]

Skips number of frames assigned in [SKIP]when playing back. This increases play rateand may be useful when searching over along period of time.

③ [SPEED]

Displays each frame for longer periods oftime. This function may be useful whenexamining a short recording carefully.

①[Zoom] Click on this button to zoom in and out the currentdisplayed image. 5 zoom levels are available

②[Digital Zoom]You can choose mouse right-click mode here. Mouseright-click can be used to zoom in, out, or move thescreen image. To use Digital Zoom, you must haveone channel selected. There are 13 zoom levels.

[Zoom In]When you select [Zoom In], the cursor will changeinto a plus sign. You can zoom in by right clickingon a frame.

[Zoom Out]When you select [Zoom Out], the cursor willchange into a minus sign. You can zoom out byright clicking on a frame.

[Move]When you select [Move], the cursor will changeinto a hand. You can move the screen by holdingthe right mouse button and dragging on a frame.

7.4 Zooming in/out and Moving

1 2

☞ [Tips]�For small images zooming out can

distort them. Kodicom's compressionengine "X-Engine CODEC" isdeveloped to minimize this problem.

�Zooming the searched image can bedone only with one camera. Zoomingis impossible when searching overmultiple cameras at one time. When insplit screen mode, stop playing backand click on a channel you wish tozoom in or out.

1

25


1

24


7.5 Image Adjustment

[Image Improvement]

[Brightness]Adjust brightness of the displayedimage

[Contrast]Adjust contrast of the displayedimage.

[Smooth & Sharpness]Smoothen and sharpen the displayedimage.

[Noise reduction]Reduce noise in the displayed image.

[Deskew]Flatten and rotate the displayedframe for better view if the camerawas recording at tilted angle.

[Gamma correction]Adjust balance between brightnessand contrast of the displayedframe. This function may be usefulif the color of the frame looksabnormal.

[Rotation]Rotate the displayed frame 90。,180。, 270。, flip horizontally, and/orvertically.

[Restoration]Restore the displayed frame'soriginal parameters.

☞ [Tip]All the image-adjusting functions are onlyavailable to one channel at a time. Whenin split screen mode, stop playing backand click on a channel you wish toadjust.

1

1

7.6 Audio playback

① [Audio Playback Configuration]

When select a channel with recorded audio, "Audio Setup" button is

enabled. Click on the button to change audio settings for the channel:

• Enable audio playback by check the box "Enable"

• Adjust the audio volume using scroll bar "Volume control"

1

☞ [Tips]�Only one audio channel can playback at a time (for both Live Mode and Search Mode)

�Due to the video and audio synchronization you may not see video images for 1~3 seconds

�Audio can only be played back in forward mode. Reverse Playback or Frame Playback are not

available.

�Skip and delay functions cannot be used with audio playback

�When switch from Live Mode to Search Mode, the microphone is automatically set mute.

(when back to the Live Mode, the original state of the microphone will be restored.)

1

27


1

26


① [Print]

Click on the button to print the selected image.

1

7.7 Printing

! [Warning]- A printer must be installed (see next page for instruction)- Printing is possible only for a single still image. When in split screen mode, stop playing back andclick on a channel to select an image you wish to print.

- It is recommended to print after adjusting size and brightness of the image- Printout is the same size as the original image on the monitor

☞ [Tips]Installing printer1. Click on Star →Setup →Printer2. In Printers window, double click on "Add Printer"3. In Add Printer window, click on Next.4. Choose manufacturer and model of your printer.5. Select printer port.6. Follow further instructions on screen.7. If your printer is not listed, consult with your printer dealer

1

29

1. KSR Center User s Manual8. Pan/Tilt Control Mode

1

28

1. KSR Center User s Manual8. Pan/Tilt Control Mode

8. Pan/Tilt Control Mode

① Click on a channel withpan/tilt camera to be able topan/tilt control the camera(pan/tilt menu will appear onthe right)Both left- or right-click can beused, the only difference is left-click zooms the channel in (tosingle-channel-view mode);right-click leaves you undercurrent split screen mode.

②When in pan/tilt control mode,

click on [DIS] button if you

wish to return to Live Mode.

setup

1

Pan/Tilt Control Mode

2

8.1 Pan/Tilt Control

1

234

6

78

910

①Displays current time and date②Auto Click to turn on/off the auto

PAN/TILT function.③PowerClick to turn the camera on/off④WiperClick to operate the camera wiper⑤LightClick to turn on/off camera lights

⑥Pan/Tilt Control Click on the arrows toadjust the camera direction - up/downand right/left.

⑦Focus Click on the arrows to adjust thefocus of the cameras lens (not applicable toauto focus lens)

⑧ZoomClick on the arrows to zoom in/out⑨DISClick to return to Live mode

⑩[Go-To]

�Click on the corresponding buttons tomove the camera to the preset positions.

�To setup preset positions, click on to switch it to . Point the camera tothe desired position and click on onepreset button you want to save theposition to. Wait until the button isreleased.

�Follow the setup steps above for allpreset buttons.

�Most speed dome cameras support presetfunction

�Most Rx receivers don’t support presetfunction.

☞ [Note]- PAN/TILT control may vary depending on camera model- For non-pan/tilt cameras to use Pan/Tilt functions, a Rx receiver (e.g. KRE-301 or KRE-302, KRE-303) for each camera is needed.

5

1

31

1. KSR Center User s Manual9. Site Setup

1

30


9. Site Setupsetup

①[Setup]

Click on button toconfigure site-side settings.The Site must be connectedbeforehand. You will beprompted for password:

Enter the password, and click on[Setting up] button. The setup windowwill appear as shown on the left

For all setup tabs :

② [Setting up]

Click to save the changes that havebeen made.

③ [Cancel]

Click to discard the changes that havebeen made.

④ [Exit]

To exit setup, click on [Exit] button.

1

4

☞ [Note] Important:- For all setup tabs remember to click on [Setting up] to save the changes or click on[Cancel] to discard the changes

- If you don't click on [Setting up] you may lose the changes you made.

9.1 Camera/Sensor/Control Setup

9.1.1 For KSR 204, 304M, 404 models

①[P/T] [PT Model]

• To display PTZ status of the installedcameras

②Sensor Type

• To set the sensor's type (NC or NO) NC: Normally Close Type SensorNO: Normally Open Type Sensor

• Click on the button to switch between NCand NO types (Default is NC)

③Beep

• If the box is checked, the Center PC'sinternal speaker will beep when thesensor triggers. It is useful for on-spottesting.

• If "Continuous Recording" was set in therecording schedule, this function will notoperate.

④Control

• Check the boxes to use the control relays.

⑤Operation Time

• If a sensor triggers, the correspondingcontrol(s) will be active during the timespecified in the box. Maximal value is 30sec, default value is 0 sec.

1 2 3 4 5

2 3

1

33


1

32


①[P/T/Z], [P/T/Z Model]• Displays PTZ information of the camera

installed.

②[Sensor]• [Sensor Num]: Choose a sensor (1 ~ 4) you

wish to setup • [Sensor Type]: To set the sensor's type (NC

or NO) NC: Normally Close Type SensorNO: Normally Open Type Sensor

Click on the button to switch between NCand NO types(Default is NC)

• [Sensor Beep]If the box is checked, the Center PC'sinternal speaker will beep when the sensortriggers. It is useful for on-spot testing. If "Continuous Recording" was set in therecording schedule, this function will notoperate.

• [Sensor Beep]If this function is set, the system willgenerate a buzzer sound from internalspeaker when the sensor detects a signal.Useful for on-spot testing. To use beep alarm function, turn SensorBeep “ON”. If “Continuous Recording” was set in therecording schedule, this function will notoperate.

③[Sensor-Control]This menu is used to setup which sensorconnects to which control.

• [Sensor Num]: Choose a sensor you wish tosetup

• [Control]: Choose controls to connect to thesensor. The controls will be activate if thesensor triggers.

④[Sensor-Camera]This menu is used to setup which sensorconnects to which camera.• [Sensor Num]: Choose a sensor you wish to

setup• [Camera]: Choose cameras to connect to the

sensor. The cameras will record if the sensortriggers

⑤[Control/Control Operation Time]• If a sensor triggers, the corresponding

control(s) will be active during the timespecified in the box. Maximal value is 300sec, default value is 0 sec.

9.1.2 For KSR509, KSR516, KSR816 models

12

3

4

5

①[Backup Schedule List]

• This list contains all scheduled backups, sorted by time.

②[Add]

• Click on the button to add a backup (see 10.2.1).

③[Del]

• Click on the button to delete the backup highlighted in the list

1

23

9.2 Backup Schedule Setup

1

35


1

34


①[No.]

• The number of the to-be-added backupin the backup list is showed here.

②[Date/Time]

• Select the start time and the end time ofthe backup.

• The start time and the end time must beboth later than the current time.

③[Rotation]

• To make the backup periodical. A backupcan be scheduled yearly, monthly,weekly, daily or none (only at the specifictime)

④[Media]

• Click to select the medium to save backupdata to. Available media are local USBdisk and remote drive.

• To backup to remote drive, the IP addressand password of the remote computer areneeded. The remote computer must runKodicom's Backup Server program

⑤[Add]

• Click on [Add] to add a backup or clickon [Discard] to cancel it.

2

5

3

4

1

9.2.1 Adding Backup Schedule

①[Camera]

� Select the camera you wish to set up. Alldescription below is related to the selectedcamera.

②[Motion Detection area]

You can specify the Motion Detection area:�The box shows video images from the

selected camera, divided into small cells.Click on a cell to select/deselect it.

�The cells of the Motion Detection area arehighlighted.

③[Recording Image Adjustment]

Adjust the color, brightness, and contrastof the selected camera.

�The values range is 0 ~ 255. By default theyare all set to 128

�Check "Audio in use" box to saveaudio data together with the videoimages from the selected camera(only one audio channel issupported)

� "Frame" shows recording speed inframe-per-second from the selectedcamera

④[Motion Detection]

�This function is used to adjust thesensitivity of motion detection ofthe select camera. Five levels ofsensitivity are supported.

⑤[Select All]

�Click on [Setting up] to set the entire screenas the Motion Detection area.

�Click on [Off] to clear off the MotionDetection area

⑥[Beep]

�If the box is checked, the Center PC'sinternal speaker will beep when theselected camera detects motion within theMotion Detection area. It is useful for on-spot testing.

�If "Continuous Recording" was set in therecording schedule for the camera, thisfunction will not operate.

9.3 Motion Detection Setup

2

1

3

4

5 6

2

1

37


1

36


⑦[Quality]

� Click on the box to choose the quality of theimage to be saved.

�Higher quality requires more storage space

⑧[Resolution]

�Click on the box to choose the recordingresolution.

�"352x288" is default resolution (it may varyon different models). The default resolutionis reasonably good for full-sized image.

�Higher resolution requires more storagespace

⑨[Schedule]

�The table shows recording mode in 2-hour

basis. To change the recording mode: selectthe time interval you wish to change (multicells can be selected by dragging mouse) andchoose recording mode on the right

�The default recording mode is M:S ("Motion& Sensor Recording")

�More on recording modes see next page

⑩[Copy To]

�Click on the button to copy the settings forthe cameras to other cameras

7 8

9

10

☞ [Note]

Continuous Recording �To continuously record all inputs without any trigger functions.

Motion Recording �To record when motion is detected.

Sensor Recording �To record when sensor signal is detected.�If "Continuous Recording" is selected in the schedule Sensor Recording is not applicable.

Pre Alarm� If motion is detected, images from 3 seconds prior to that motion will be saved.

(However, if this function is setup in several cameras, the 3 second period may be less)� If "Continuous Recording" is selected in the schedule Pre Alarm is not applicable.

Recording Supported Recording Mode

�N: None�C: Continuous

Recording�M: Motion

Recording�S: Sensor

Recording�P: Pre Alarm

Recording

�No Recording �Continuous Recording �Motion Recording �Sensor Recording �Motion & Sensor Recording�Motion & Pre Alarm Recording �Sensor & Pre Alarm Recording�Motion& Sensor &Pre Alarm

Recording

1

1. KSR Center User s Manual10. Snapshot 실실행행

1

38


①Site Configuration

�The IP address, the gateway and subnet mask of the Site is shown here.

②[Emergency]

�[Center IP Address]: Center IP address can be set here.�[Center Tel No.]: The Center telephone number can be set here.�[Transmission Time]: Select the channel transmission time for emergency connection.

(0,30,60,90,120, or 150 seconds)�[Alarm Sensor]: Select sensor(s) for emergency connection. If a sensor is selected (the

corresponding button is pressed), video images will be transmitted to the Center if the sensortriggers

2

1

9.4 Network Setup

39

10. Snapshot 실실행행실행방법

①[Snapshot 실행]

• 감시화면의 상을 이미지 형식

으로 저장할 경우 버튼을

클릭할수있습니다.

②[Snapshot 화면]

• 감시화면의 상을“Snapshot”

화면에이미지로표시합니다.

1

1

40

1. KSR Center User s Manual10. Snapshot 실실행행

1

41

1. KSR Center User s Manual11. Searching Backup Data

11. Searching Backup DataSetup

①[Search]

• To search the backup datasaved on the Center PC,disconnect the Site and click on[Search] The backup data saved in localHDD (and removable drives ifthose presents) will bedisplayed as shown below.

1

1 23

4

①[Location]�이미지가저장되는경로를표시합니다.

②[경로입력버튼]

� 버튼을클릭하여저장경로를선택합니다.

③[File Name]�저장될이미지의이름을입력합니다.

④[이미지목록]�감시화면에서스냅샷(Snapshot) 된이미지를표시합니다.�저장하려는이미지를선택합니다.

1

43

1. KSR Center User s Manual12. Data Backup

1

42

1. KSR Center User s Manual11. Searching Backup Data

①[Site Model]�Click on the tab corresponding to the KSR

model installed at the Site (availablemodels are KSR404, KSR304M, KSR204,KSR509, KSR516).

②[Site Code]�This column show the site codes of the

backup data.�If several different sites are listed on the

backup log, users can identify the data bythe site code.

③[Data Type]�Type of backup data is displayed.�"Live" type is related to the backup data

saved on the Center PC as a result of"Now screen data save"(see page 11).

�"Search" type is related to the backup datasaved on the Center PC as a result of"Remote search data save" (see page 11).

�When data are saved in the Center PCas a result of "Remote Backup" on theSite, corresponding Data Type is none([Data Type] column is displayedblank) .

�"Backup" type is related to the backupdata saved on the Center PC due toBackup schedule (see 10.2) or manualbackup (see chapter 12).

④[Date and Time]�This column displays the starting time

and the ending time of the backups.

⑤ [Time Zone]�This column displays the time zone of the

backups.

⑥[Path]�This column displays the location where

the backup data is saved.

⑦ [Search]�Select a backup on the list and click on

[Search] to start searching. Search modescreen is displayed then.

1 2 3 4 5 6

7

☞ [Note] Backup Data SearchOnce you are in search mode, the searchfeatures described on chapters 7 (7.1~7 .7)can be used

12. Data Backup

① [Backup]

Click on button to backup the recorded data. Backup window will appear as shown

below:

1

☞ [Note] Data Backup�The data backup function is not supported

while the Site is connected.�This function is only applicable to the backup

data of the types of "Live" or "Search" ,stored in the Center PC.

1

45


1

44


1. [Floppy Backup]

�Select an image from the search screen (only

single still image can backup to floppy disk).

Then, click on button to display "Backup"

window as above.

�Select [Floppy Backup] and click on [Setting up]

button. Then the "Watermark checker Copy"

dialog box will appear as shown below:

�Select "Yes" to backup the selected image and copy Watermark Check program to the floppy

disk.

�When backup many images to the same floppy disk, Water Mark Check program needs to be

copied only once.

12.1 Floppy Disk Backup

☞ [Note]- The backup format is JPG- Watermark is used to check authentication of the saved image (see next page)- Despite the name "Floppy Backup" not only floppy disk can be a backup medium, local HDD orremovable drive can be used for Floppy Backup as well

Using Watermark Checking Program

Click on [File Open] to select the image you want to verify authentication

The user can check whether the backup image has been modified or not, using WatermarkCheck program:Run "WMChecker.exe" that was copied to the floppy disk together with the backup image

1

1

47


1

46


�Select the image you wish to check

authentication, and click on [Open] button:

�Click on [Water Mark Check] to start verification. After verification is completed, the results

will be displayed as shown below:

[The image has been modified] [The image is authentic]

① [Select Camera]�Select the cameras to back up from.

② [Backup Type]�Select "KDB Backup" or "AVI Backup" type.

[KDB Backup] - Select this menu when backing up large

amount of data- Since data are saved in a unique Kodicom

format it is not possible to playback datausing general software. Use Center softwareto playback data.

[AVI Backup]

- Data saved by [AVI backup] method are ingeneral format and can be played back byWindows Media Player or the likes.

- With [AVI backup], it is possible to selectcameras to backup from. User can backupmaximum 5 minutes of video data at a time.

③ [Date/Time]�Set the start time and the end time of the

backup.

④ [Backup Media]�Click to select media to save backup data. �The user can select the local hard disk,

removable drive and network drive but notfloppy drive.

⑤ [Select CODEC]�With [AVI backup], it is possible to select

codec type. (MPEG4 Video Codec v2 orhigher is recommended because ofperformance issue)

12.2 KDB Backup and AVI Backup

☞ [Note]Audio data are not backed up when using "AVI Backup"Depending on the resolution of the stored video data, the resolution of the AVI Backup is as follows :

Stored Video Data Resolution AVI File (NTSC/PAL Common) Resolution704x480 (704x576) 320x240352x240 (352x288)

1

2 3

4

5

1

1

49

1. KSR Center User s Manual13. Backup Server

1

48


13. Backup Server

- The backup server is used to receive backup data when User carries out the "Remote DriveBackup" function at the Site (see your KSR Manual for details about "Remote Drive Backup").The backup server is automatically executed when you run the Center Program.

①[Menu]

[Change Passwd]

�Choose this menu item to change the password to access the Center.[BackupLog]

�Choose this menu item to see information about the backups that have been done. See nextpage for details.

②[Backup log history]

�The table displays data transmission status of "Remote Drive Backup" (file size, time, site IPaddress and site code).

�Backup Server supports unlimited number of connections (limited only by your Center PCresources), and parallel backup can be done from multiple sites.

2

1

Playback AVI Backup File

① [AVI Backup File]

�The AVI backup's result is saved in a filewith name "C:\KDB\BACKUP\MonthDateYear-HourMinuteSecond~MonthDateYear-HourMinuteSecond[Camera No].avi"

② [Playback the AVI backup with caption

data]

�Use Windows Media Player or anotherplayer to playback the file above

�When playing back, It is possible todisplay the date, time, day and thecamera number if you turn on captions/subtitles (for Windows Media Player 9series: go to menu "Play/Captions andSubtitles" and select [On])

☞ [Note]- Windows Media Player v6.4 or higher isrecommended.

- After a backup you may find nothing in thefolder "C:\KDB\BACKUP". It is because novideo data are stored at the chosen backuptime and cameras

1

2

1

51


1

50


13.1 Change Password

[Change Password]

�You can change the password to access the Center as shown above. The same password mustbe entered when schedule a "Remote Drive Backup" at the Site.

13.2 Backup Log

①[Backup Log History]

�The list of "Remote Drive Backups" with details is shown②[Log View]

�Select a backup in the list and click on [Log View] for the backup's details (see next page)③[Delete]

�Select a backup in the list and click on [Delete] to delete the backup④[X]

�Click on this button to close the [Backup Log] window.

1

2 3

4

Log View

① [Client Site Code]

�This box displays the Site code of the Site where the "Remote Drive Backup" is done.

②[Client IP]

�This box displays the IP address of the Site.

③[Backup Start Time]

�This box display the start time of the transmission of the backup data.

④[File Transmission Data]

�This box displays the details of the backup

⑤[OK]

�Click to close the [Log Contents] window

1

2

3

4

5

1

53

1. KSR Center User s Manual14. Intelli Upgrader

1

52


14. Intelli Upgrader

14.1 Running Intelli Upgrader

- Intelli Upgrader is software used to remotely upgrade Kodicom's DVR system software

Run "Intelli Upgrader" program by double-clicking on its icon on the Center PC's desktop.The icon is created during installation of theCenter Program.

① [Site Information]

�List of the known sites (that is, the sites that are registered in theCenter program). Site Code, IP-Address, Description and Type ofthe Sites will be displayed. Click mouse to select a site you wish toupgrade from the list.

②[Select Connection Type]

�Click to select the type of the connection to the Site.

③[Package Select]

�Select the folder where the update package file is located.

④[Update Package]

�After a update package is selected, information about it is shown

⑤[Start Update]

�Click to start upgrading the Site's software (see next page fordetails)

⑥[Exit]

�Click to exit the Intelli Upgrader program.

[Intelli Upgrader] is running

[Site registered in Center Program]

☞ [Note]Intelli Upgrader does not support change, deletion or entry of anysite information.

1

2

3

4

5 6

14.2 Remote Upgrade

①[Site List]

�Select the site you wish to upgrade.

②[Package select]

�Click to select a upgrade package. A selection boxappears as shown below on the left.

③[Start update]

�After selection the site and the package, click on the[Start Update] button to start upgrading software atthe site (see more on next page).

[Package selection Window ]

☞ [Note]�When using Intelli Upgrader, upgrading from floppy disk

is not supported. Therefore, it is recommended to copy

the upgrade package file to hard disk or removable

drive.

�Intelli Upgrader will check integrity of the update

package for damage. If the package is damaged, Intelli

Upgrader will not upgrade the Site.

1

2

3

1. PSTN/ISDN (without a Router) PPP Setup

2. Manual ISDN Setup without a Router

2. Appendix1

54


The box shown below will appear if User clicks on the [Start Upgrade] button (see previouspage)

4. After upgrading is completed, press [OK] button to restart the Site. After restarting,the Site's software upgrade is completed.

4

4

2

57

2. Appendix1. PSTN/ISDN (without a Router) PPP Setup

1. [PPP Setup using KPPPSetup.exe Program]

• To set up PPP connection for PSTN/ISDN,run KPPPSetup.exe. The program islocated in the folder where the CenterProgram is installed (usually it isC:\KSR_Center as shown in the pictureabove)

2. [Preparation to Installation]

• The MS Windows Installation CDs areneeded.

• A modem is installed in MS Windows.• If no modem is installed, running

KPPPSetup.exe may give unexpectedresult. Remember to run it only afterinstallation a modem.

3. [Running KPPPSetup.exe]

• KPPPSetup.exe will automatically install

PPP connection for you. Except if you areprompted to insert the MS WindowsInstallation CDs, don't do anything untilthe program finishes its work.

• Reboot the Center PC after completingPPP setup by the program.

• After the system is rebooted, checkconnection Center-Site using Centerprogram.

4. [KPPPSetup.exe will setup the followings:]

• Telephone connection networking• Telephone connection server• Telephone caller • Telephone connection adapter• TCP/IP protocol• Telephone connection server setup change

1. PSTN/ISDN (without a Router) PPP Setup

2

59

2. Appendix2. Manual ISDN Setup without a Router

2

58

2. Appendix1. PSTN/ISDN (without a Router) PPP Setup

5. [Others]

• In case TCP/IP or telephone connectionadapter was already installed, it will not beinstalled again.

• You should close "Network Properties" and"Telephone Connection Server " windowsbefore running KPPPSetup.exe program.

• Do not execute KPPPSetup.exe programmore than two times at the same time.

• Connect to the site from the center to checkthe connection status.

2. Manual ISDN Setup without a Router

1. [Rational for using manual setup]

• KPPPSetup.exe can setup ISDN automatically. However, depending on the ISDN modem, itmay be necessary to manually setup dial-up connection servers if there are many servers.Manual setup procedure is described below.

• Before manual set up, you should use KPPPSetup.exe to setup first dial-up connection server. • The following description is for MS Windows 98, Windows Me and Windows 2000.

2. [Manual Setup]

�Select "My Computer" and"Telephone ConnectionNetworking." from thewindows backgroundscreen.

�Select "Connections" → "Dial-Up Server"from the menu.

�Select "Allow caller access."

☞ [Note]Automatic PPP setup for ISDN by usingKPPPSetup.exe is possible only when ISDN isused through direct connection without router.

▶ This warranty is not issued again.▶ This warranty should be filled out when the product is purchased.▶ The customer is requested to present this warranty to get any free

service covered by this warranty.

� The warranty will cover breakdown occurring during normal operation within the warranty

period (one year from the purchasing date).

� Service fees and replacement part costs will be charged for in the following cases:

1. Breakdown or damage due to user's carelessness

2. Breakdown or damage by natural disasters

3. Breakdown or damage caused by the user not following instructions and cautions written in

the user's manual.

4. Breakdown or damage due to using power (voltage and frequency) not to specification.

5. If it is necessary to provide consumable parts or disassemble and clean the whole system

within the warranty period.

6. Modifications or damages by an unqualified engineer not assigned by KODICOM

� If your system is broken after the warranty period, a free repair service will not be provided. If

the customer wishes, a repair service will be provided with service fees and replacement part

costs.

� Check this warranty first.

� Double-check the problem and contact your dealer.

� For product repair, exchange, and refund, KODICOM follows the "Compensation

Regulation for Customer's Loss" announced by "The Economic Planning Board".

The quality of this product is guaranteed by strict quality control and testing process.The warranty covers breakdowns occurring during normal operation within the warranty period.

WWaarrrraannttyy IInnffoorrmmaattiioonn

WWaarrrraannttyy IInnffoorrmmaattiioonn

WWaarrrraannttyy

Product/Model Number

Serial Number

Purchasing Dealer

Purchasing Date

Warranty Period

CustomerName

Address

One year from the purchase date

PPrroodduucctt WWaarrrraannttyy

2

60

2. Appendix2. Manual ISDN Setup without a Router

•Select "PPP: Windows 98, Windows NT4.0.Internet" from the "Server Type."

•Check "Enable software compression" and "Requireencrypted password", and click on "OK" button.

•Check if "Status" field changes into "Monitoring."(As shown in the above figure, the telephoneconnection server type changes depending on theISDN modem installed.)

• Select "Change Password" andenter the old password, and"1111" as the new password.

☞ [Note] Line Speed

�If connection is often released or disconnected orconnection is not stable when connection is madethrough the PSTN, select "Control Panel" and "Modem"and select "Generals" and "Properties."

�In "Modem Properties"→ Select the maximum speed as "38400" for the PSTN→ Select the maximum speed as "115200" for the ISDN

�For stability of the communication line, the center andthe site modems shall have the same "maximum speed."(Depending on communication line conditions such asnoise and deterioration, connection might be poor.)

ver.1.0(0408)E

what is the center program? - pniglobal.compniglobal.com/cctv/dvr/diginetcenter.pdf · ksr center...

Documents