WESTBROOKWELDING ALLOYS LTD.

BUYERS PRODUCT GUIDEWelding Wires & Electrodes

Next Day Delivery Tel: 01925 839983

Small Diameter Tig Wires 0.8, 1.0 & 1.2mm Fax: 01925 839990

Designation

STAINLESS STEEL FILLER WIRES

BS EN ISO 14343 AWS A5.9-95 Werkstoff No. Information

-

19.9L

19.9LSi

23.12.H

23.12.L

23.12.LSi

23.12.2.L

25.20

29.9

--

19.12.3L

19.12.3LSi

18.15.3L

19.9Nb

13

--

17

22.9.3NL

25.10.4NL

*Nearest Equivalent

ER307*

ER308L

ER308LSi

ER309

ER309L

ER309LSi

ER309MoL

ER310

ER312

ER316H

ER316L

ER316LSi

ER317L

ER347

ER410

ER420

ER430

ER2209

N/a

1.4370

1.4316

1.4316

1.4829*

1.4332

1.4332

1.4459

1.4842

1.4337

1.4436

1.4430

1.4430

1.4438*

1.4551

1.4009*

1.4007

1.4016

1.4462*

1.4501

SW-307

SW-308L

SW-308LSi

SW-309

SW-309L

SW-309LSi

SW-309LMO

SW-310

SW-312

SW-316H

SW-316L

SW-316LSi

SW-317L

SW-347

SW-410

SW-420

SW-430

SW-4462

SW-4501

An 18.8Mn wire for crack resistant welds in difficult to weld steel and dissimilar joints. Work-hardens 220-400HB.

This 18.8 filler wire is used to weld corrosion resistant 304/304L alsoother grades e.g 301,302, 303 and 305.

Applications as 308L, with a balanced analysis and increased siliconcontent an improved weld bead appearance is obtained.

A high carbon filler wire used for buttering layers on C-Mn steel andjoining stainless to steels for high temperature service.

This wire is used for joining stainless to C-Mn steels and also as abuttering layer prior to overlaying with 308L.

Applications as 309L, with a balanced analysis and increased siliconcontent an improved weld bead appearance is obtained.

May be used as a dissimilar to join stainless steels, particularly Molybearing, to C-Mn steels.

Recommended for joining and reclaiming 25Cr-20Ni stainlesssteels with carbon<0.2% in both wrought and cast form.

A filler wire with a high tolerance to dilution recommended fordissimilar joints and high strength difficult to weld steels.

Used for welding high carbon 316H stainless steel working in hightemperature creep conditions for extended periods of time.

A filler wire used for 316/316L moly-bearing stainless steels withexcellent corrosion and pitting resistance properties.

Applications as 316L, with a balanced analysis and increased siliconcontent an improved weld bead appearance is obtained.

With an increased molybdenum content over 316L this alloy has improved pittingresistance in high chloride environments. Nickel is also increased significantly

A niobium stablisied stainless filler wire for welding 347 and 321type stabilised corrosion resistant stainless steels.

For joining martensitic 12%Cr (410 type) stainless steels used forresistance to oxidation and hydrogen attack.

A matching filler wire for AISI 420 martensitic type stainless steelwith higher chrome and carbon contents than a 410 type

Filler wire for welding AISI 430 ferritic stainless stell

A Duplex type stainless stel filler used for welding 22CR/9Ni(UNS 31803) type materials, typical PREN number is 34+.

A super duplex type wire used for the welding of 25/10/5 material(S/Duplex) Typical PREN 40+.

Designation

CHROME - MOLY FILLER WIRES

BS** AWS Information

A5.28:ER80S-B2*

A5.28:ER80S-D2*

A5.28:ER80S-B3*

CMW-1900

CMW-1910

CMW-1920

For welding low alloy ferritic creep resisting steels 1Cr 0.5Moand 1.5Cr 0.5Mo used extensively in power generation.

A Manganese-Moly filler wire for welding high strength steelswith good sub-sero toughness in the PWHT condition.

For welding 2.25cR 1mO AND 0.5cR 0.5mO 0.25v low alloyferritic creep resisting steels used in power generation.

BS 2901:Pt1:A32

BS 2901:Pt1:A31

BS 2901:Pt1:A33

*Nearest Equivalent ** Now obsolete WELD

ING

WIR

ES

WELD

ING

WIR

ES

Next Day Delivery Tel: 01925 839983

Subject to orders placed before 4.30pm Fax: 01925 839990

Designation

ALUMINIUM & ALUMINIUM ALLOY FILLER WIRES

ISO EN 18273 AWS A5.10 Information

ER1100*

ER4043

ER5183

ER5356

ER5556

AW-1050

AW-4043

AW-5183

AW-5356

AW-5556

Classed as pure aluminium this alloy is suitable for use in thefood and chemical industries and on work being anodised.

A 5% silicon alloy for wrought and cast materials of similarcomposition but not for use on items to be anodised.

This alloy is mainly available as Mig. Can be anodised - high strengthand marine applications.

A 5% magnesium alloy used to weld similar alloys for use inmany marine and chemical plant applications.

With a magnesium content of 5% minimum this high strengthalloy is used mainly on marine castings and fabrication.

AL 1050

AL 4043

AL 5183

AL 5356

AL 5556

*Nearest Equivalent

Designation

NICKEL & NICKEL ALLOY FILLER WIRES

BS 2901:Pt5 AWS A5.14 Werkstoff No. Information

ERNi-1

ERNiCu-7

ERNiCr-3

ERNiCrMo-3

ERCuNi

ERNiCrMo-4

2.4155

2.4377

2.4806

2.4831

2.4886

NW-1700

NW-1710

NW-1720

NW-1740

NW-1750

NW-1760

A low carbon filler wire for Nickel 200/201 also for buttering oroverlaying other materials prior to joining.

A nickel-copper type filler wire for welding Monel 400 and otherproprietary alloys also joining these materials to steel.

This wire is recommended for welding Inconel 600/601 andIncoloy 800 also joining these to steel including stainless types.

For joining Inconel 625, Incoloy 825, 6Mo and dissimilar jointsbetween Ni-Alloys and stainless steels also overlaying steel.

A CuNi filler wire for joining 70/30 and 90/10 copper nickel anddissimilar joints between CuNi, Monel 400 and Nickel 200.

A filler wire for C-276 and similar NiCrMo alloys also jointswith stainless steels and overlaying C-Mn steels.

NA32

NA33

NA35

NA43

C18*

NA48

COPPER & COPPER ALLOY FILLER WIRES

Designation BS 2901:Pt3 AWS A5.7 Werkstoff No. Information

ERCuSn-A*

ERCuAl-A1

ERCuSi-A

ERCu

2.1022

2.0921

2.1461

2.1006

CW1800

CW1810

CW1820

CW-1860

A Tin Bronze wire for welding Phosphor Bronze and similar typematerials also for wear and corrosion resistant overlays.

An 8% Aluminium Bronze filler wire for joining or reclaimingsimilar materials or wear resistant overlays on steel.

A copper-silicon wire for joining matching alloys and the MIGbrazing of steel also dissimilar joints with other copper alloys.

Pure copper filler wire with good weldability for use on mostgrades of deoxidised copper requiring high conductivity.

C11

C28

C9

C7

Designation

HARD SURFACING FILLER WIRES

DIN 8555 Hardness Information

350HB

58RC

**

**

HW-1400

HW-1410

HW-1460

HW-1461

Recommended for areas of high impact this wire is for useon tools, dies and equipment used in quarrying industry.

With a hardness of 58RC the wire is recommended for use in highabrasion/moderate impact situation e.g. tool/die and earthmoving.

High speed steel deposit, compatible with many tool steels,to give hardness of 58-60 Rc

Hot-work tool steel deposit with matching analysis to H11.Heat treatable.

MSG2-GZ-350

MSG6-GZ-60

WSG4-GZ-60-S

WSG6-GZ-55-T WESTB

RO

OK

WESTB

RO

OK

2.0837

*Nearest Equivalent ** Hardness dependent upon base material

** Monel, Incoloy, Inconel and Nimonic are trademarks of Inco Group of Companies. (special metals)

Next Day Delivery Tel: 01925 839983

Subject to orders placed before 4.30pm Fax: 01925 839990

Most available in Mig to BS EN 440

Designation

MILD & LOW ALLOY STEEL FILLER WIRES

BS / BS EN AWS Information

-

A5.18:ER70S-2

A5.18:ER70S-6

A5.28:ERS80S-Ni1

A5.28:ERS80S-Ni2

MS-A1

MS-A15

MS-A18

MS-A801

MS-A802

A copper coated mild steel filler wire for the oxy-acetylenewelding of mild steel sheet, plate and pipework.

A triple-deoxidised copper coated mild steel wire for Tigwelding all forms of mild steel especially tube.

A double-deoxidised copper coated wire for Tig welding allforms of mild steel especially work for radiographic quality.

A wire containing 1% nickel that is used on C-Mn or similarsteels for sub-zero toughness and corrosion resistance.

A wire containing 2% nickel that is used on C-Mn or similarsteels for sub-zero toughness at-50 to -75Deg.C.

BS 1453:1972:A1(1987)

BS EN1668:1997:W2Ti

BS EN1668:1997:W3Si1

BS EN1668:1997:W3Ni1

BS EN1668:1997:W2Ni2

Electrode

Electrode

MILD STEEL ELECTRODES

ELECTRODES FOR CAST IRON

Classification

Classification

Coating Data

Coating Data

Information

Information

MS-100

CI-200

MS-120

CI-220

MS-135

MS-136M

MS-6013T

A medium coated electrode for fabrication of plate andpipework especially where high quality weld finish is the criteria.

For use on all types of cast iron giving a fully-machinabledeposit easy to use even in position.

Designed for vertical-down welding this electrode can be usedin all positions with ease giving an excellent profile and finish.

A Ni-Fe electrode for joining and surfacing the higher strengthnodular cast irons and joining iron to mild steel.

Universal basic-coated electrode (115% recovery). Good lowtemperature properties down to -50DegC.

Double-coated low hydrogen electrode for universalwelding. Excellent for root runs.

Economical mild steel electrode for general fabrication.

BS EN 499:E380RC11AWS A5.1:E6013

AWS A5.15:ENi-Cl

AWS A5.15:ENiFe-Cl

BS EN 499:E380RC11AWS A5.1:E6013

E424 B32 H5

E382 B12 H10

E420 RC11

Rutile - Cellulose

Graphited

Graphited

Rutile-Cellulose

Basic

Basic

Rutile

ELECTRODES

Electrode

ALLOY STEEL ELECTRODES

Classification Coating Data Information

AS-300

AS-315

High recovery electrode for difficult to weld steels and also bufferlayers prior to hardsurfacing. Recovery 160% approx.

Designed for maintenance and repair of difficult to weld steelsand dissimilar joints between stainless and mild/alloy steels.

BS EN 1600:E18 8 MnR53AWS A5.4:E307-26

BS EN 1600:E29 9R12AWS A5.4:E312-16

Rutile

Rutile

Electrode

HARD SURFACING ELECTRODES

Classification Coating Data Information

HF-415

HF-400

HF-425

57 RC. ACr-Mo-V martensitic type electrode for surfacing areas ofabrasion, moderate to high impact and compression

Wear facing electrode for impact resistance.

58-60 RC. The deposit is a C-Cr-Fe weld metal with 140%metal recovery to resist high abrasion up to 200Deg.C.

DIN 8555 E6-UM-60S

E1-UM-400

DIN 8555 E10-UM-60-6PRZ

Rutile / Basic

Rutile

RutileWELD

ING

ELECTR

OD

ES

WELD

ING

ELECTR

OD

ES

WIR

ES

WIR

ES

MS-7018-1TEconomical low hydrogen electrode.

E426 B42 H5 Basic

Next Day Delivery Tel: 01925 839983

Subject to orders placed before 4.30pm Fax: 01925 839990

Electrode

Electrode

Electrode

STAINLESS STEEL ELECTRODES

NICKEL ALLOY ELECTRODES

COPPER ALLOY ELECTRODES

Classification

Classification

Classification

Coating Data

Coating Data

Coating Data

Information

Information

Information

RutileAC/DC+ve

RutileAC/DC+ve

RutileAC/DC+ve

RutileAC/DC+ve

RutileAC/DC+ve

RutileAC/DC+ve

RutileAC/DC+ve

RutileAC/DC+ve

RutileAC/DC+ve

SS-620

SS-630

SS-640

SS-650

SS-660

SS-670

SS-680P

SS-690

SS-695

A low carbon electrode for welding AISI 302, 304, 305 and304L type stainless steels. Also for corrosion resistant overlays.

A low carbon electrode for welding AISI 316 and 316Lmoly-bearing stainless steels with improved pitting resistance.

For welding 347 & 321 - when welding 321 maximum operatingtemperature must be considered.

A high strength 29/9 type electrode for joining stainless steelto mild steel due to its duplex structure, highly crack resistant.

Suitable for corrosion resistant overlays on C-Mn steel prior todepositing 308 or 308L, also for joining s/steel to C-Mn steel.

Suitable for corrosion resistant overlays on C-Mn steel prior todepositing 308 or 308L, also for joining s/steel to C-Mn steel.

Matching electrode for the welding of duplex stainless steel(S31803)

Super austenitic electrode for the welding of materialssuch as 904L.

Electrode may be used as a dissimilar, particularly betweenMoly-bearing stainless steel and C/Mn steels.

BS EN 1600:E19 9 LR12AWS A5.4:E308L-17

BS EN 1600:E19 12 3 LR12AWS A5.4:E316L-17

BS EN 1600:E19 9 Nb R12AWS A5.4:E347-17

BS EN 1600:E29 9 R12AWS A5.4:E312-17

BS EN 1600:E23 12 LR12AWS A5.4:E309L-17

BS EN 1600:E23 12 2 LRAWS A5 4:E309LMo-17

BS EN 1600:E25 20 LR12AWS A5.4:E310-16

BS EN 1600:E22 9 3 NLR32AWS A5.4:E2209-17

BS EN 1600:E20 25 5 Cu NLR12AWS A5.4:E385-16

BasicDC+ve

Cryolite basedAC/DC+ve

Cryolite basedAC/DC+ve

BasicDC+ve

BasicDC+ve

BasicDC+ve

BasicDC+ve

BasicDC+ve

NA-700

CA-800

NA-710

CA-810

NA-720

NA-740

NA-750

NA-760

A low carbon nickel electrode for joining Nickel 200/201 alsofor buttering or overlaying other materials prior to joining.

For joining copper and copper alloys eg. Phosphor / TinBronzes also these materials to steels.

A Monel type electrode for joining Monel 400 and otherproprietory NiCu alloys also joining these alloys to steel.

An 8% aluminium bronze electrode for use on similar typebase materials and overlaying steels to resist frictional wear.

A nickel based electrode for joining Inconel 600, Nimonic 75 andcold tough 3% - 9% nickel steels for cryogenic applications.

Designed to weld Inconel 625 this electrode can be used onother nickel alloys and super-austentitic stainless steels.

A copper nickel electrode for use on 70/30 and 90/10 typecopper nickel alloys and corrosion resistant overlays.

Matching electrode for welding Hastelloy C276.

AWS A5.11:ENi-1

AWS A5.6:ECuSn-A

AWS A5.11:ENiCu-7

AWS A5.6:ECuAl-A2

AWS A5.11:ENiCrFe-3

AWS A5.11:ENiCrMo-3

AWS A5.6:ECuNi

El NiMo 15Cr15WAWS A5.11:ENiCrMo-4

**Nickel 200/201, Monel, Incoloy, Inconel and Nimonic are trademarks of Inco Group of Companies.

WESTB

RO

OK

WESTB

RO

OK

Next Day Delivery Tel: 01925 839983

Subject to orders placed before 4.30pm Fax: 01925 839990

Electrode

Electrode

CHROME-MOLY ELECTRODES

BRAZING PRODUCTS

Classification

Classification

Coating Data

Spec

Information

Information

BasicDC+ve/AC

LCuP-7

LAg2P

LAg5P

LAg15P

LAg40Sn

LAg55Sn

LCuZn40

LCuNi10Zn42

BasicDC+ve/AC

CM-900

CP0

CP2

CP5

CP15

SB40

SB55

BA 1200(FC)

BA 1210(FC)

CM-920

This electrode is for use on 1.25Cr 0.5Mo type steels atelevated service temperatures up to 550Deg.C.

Copper/Phosphorus brazing alloy without silver, notrecommended for applications where vibration is present.

Copper/Phosphorus brazing alloy with 2% silver, improvedductility over CP0. Minimum silver requirement for refrigeration.

Copper/Phosphorus brazing alloy with 5% silver, increasedductility over CP2. Recommended for refrigeration.

Copper/Phosphorus brazing alloy with 15% silver, increasedductility over CP5.

Versatile cadmium free silver brazing alloy.

Extremely fluid cadmium free silver brazing alloy forcapillary joints - good colour match for stainless steel.

General purpose brazing alloy, available as bare wire or fluxcoated.

Nickel-bearing, high strength brazing alloy, also availableflux coated.

This electrode is for use on 2.25Cr 1.0Mo type steelsespecially in high temperature/corrosive environments.

BS 2493:1CrMoBHAWS A5.5:E8018-B2

CP-3

CP-2

CP-4

CP-1

AG20

AG14

C2

C5

BS 2493:2CrMoBHAWS A5.5:E9018-B3

Electrode

ALUMINIUM ELECTRODES

Classification Coating Data Information

EL-ALSi5

EL-ALSi12

AL1000

AL1014

Aluminium electrode, containing 5% silicon for welding alloysof similar composition.

Aluminium electrode, containing 12% silicon for welding alloysof similar composition, such as extrusions and castings.

E4043

E4047

WELD

ING

ELECTR

OD

ES

WELD

ING

ELECTR

OD

ES

Next Day Delivery Tel: 01925 839983

Fax: 01925 839990

FILLER WIRES FOR JOINING SIMILAR / DISSIMILAR GRADES OF STAINLESS STEELS

Line 1. First Choice. Line 2. Second Choice. Line 3. Third Choice. Line 4. Fourth Choice.

WESTB

RO

OK

WESTB

RO

OK

Subject to orders placed before 4.30pm

BaseMaterial

BaseMaterial

301

70206082606360616101A508354545154A52515005310512001080A1050A

SW-308LSW-309L

--

AW-5556AAW-5556AAW-5556AAW-5556A

AW-5556AAW-5556AAW-5556AAW-5556A

AW-5556AAW-5556AAW-5556AAW-5556A

AW-5556AAW-5556AAW-5556AAW-5556A

AW-5556AAW-5556AAW-5556AAW-5556A

AW-5556AAW-5556AAW-5556AAW-5556A

AW-5356AW-5356AW-5356AW-5356

AW-5356AW-5356AW-5356AW-5356

AW-5556AAW-5556AAW-5556AAW-5356

AW-5556AAW-5556AAW-5556AAW-5556A

----

----

----

----

SW-308LSW-309L

--

SW-308LSW-309L

--

SW-347SW-308L

--

SW-347SW-308L

--

SW-347SW-308L

--

SW-347SW-308L

--

SW-347SW-308L

--

SW-347SW-309SW-309L

-

SW-310SW-347

--

SW-316LSW-308HSW-347

-

SW-316LSW-347

--

SW-316LSW-347

--

SW-347SW-308L

--

SW-317SW-308L

--

SW-317SW-308L

--

SW-317SW-308L

--

SW-317SW-308L

--

SW-317SW-308L

--

SW-316LSW-309L

--

SW-310SW-317L

--

SW-317SW-316L

--

SW-317SW-316L

--

SW-317L---

SW-316HSW-308L

--

SW-316HSW-308L

--

SW-316HSW-308L

--

SW-316HSW-308L

--

SW-316HSW-308L

--

SW-309LSW-316L

--

SW-310SW-316L

--

SW-316LSW-316H

--

SW-316SW-316LSi

--

SW-316HSW-308L

--

SW-316HSW-308L

--

SW-316HSW-308L

--

SW-316HSW-308L

--

SW-316HSW-308L

--

SW-309SW-316H

--

SW-310SW-316H

--

SW-316H---

SW-310SW-308L

--

SW-310SW-308L

--

SW-312---

SW-310SW-308H

--

SW-310SW-308L

--

SW-310SW-309

--

SW-310---

SW-309SW-309L

SW-309LSi-

SW-309SW-309L

SW-309LSi-

SW-309SW-309L

SW-309LSi-

SW-309SW-309L

SW-309LSi-

SW-309SW-309L

SW-309LSi-

SW-309SW-309L

SW-309LSi-

SW-308LSW-308LSi

--

SW-308LSW-308LSi

--

SW-308LSW-308LSi

--

SW-308LSW-308LSi

--

SW-308LSW-308LSi

--

SW-308LSW-308LSi

--

SW-308LSW-308LSi

--

SW-308LSW-308LSi

--

SW-308H---

SW-308LSW-308LSi

--

SW-308LSW-308LSi

--

SW-312---

SW-308LSW-308LSi

--

SW-308SW-308L

SW-308LSi-

SW-308SW-308L

SW-308LSi-

430

1050A

1080A

1200

3105

5005

5251

5154A

5454

5083

6101A

6061

6063

6082

7020

420

410

321347

317/L

316/L

316H

310/S

309/S

304/L

304H

303/Se

302/B

301

302/B 303/Se 304H 304/L 309/S 310/S 316H 316/L 317/L 321347

410 420 430

1234

1234

1234

1234

1234

1234

1234

1234

1234

1234

1234

1234

1234

1234

1234

1234

1234

1234

1234

1234

1234

1234

1234

1234

SW-308LSW-309L

--

SW-308LSW-309L

--

SW-308LSW-309L

--

SW-308LSW-309L

--

SW-309SW-309L

--

SW-309SW-309L

--

SW-316HSW-309L

--

SW-316LSW-309L

--

SW-316LSW-309L

--

SW-347SW-309L

--

SW-430SW-308L

--

SW-430SW-308L

--

SW-430SW-308L

--

SW-308LSW-309L

--

SW-308LSW-309L

--

SW-308LSW-309L

--

SW-308LSW-309L

--

SW-309SW-309L

--

SW-309SW-309L

--

SW-316HSW-309L

--

SW-316LSW-309L

--

SW-316LSW-309L

--

SW-347SW-309L

--

SW-420SW-308L

--

SW-420SW-308L

--

SW-308LSW-309L

--

SW-308LSW-309L

--

SW-308LSW-309L

--

SW-308LSW-309L

--

SW-309SW-309L

--

SW-309SW-309L

--

SW-316HSW-309L

--

SW-316LSW-309L

--

SW-316LSW-309L

--

SW-347SW-309L

--

SW-410SW-308L

--

AW-4043AAW-4043AAW-4043AAW-5356

AW-4043AAW-4043AAW-4043AAW-5356

AW-4043AAW-4043AAW-4043AAW-5356

AW-4043AAW-4043AAW-4043AAW-5356

AW-4043AAW-4043AAW-4043AAW-5356

AW-5356AW-5356AW-5356AW-5356

AW-5356AW-5356AW-5356AW-5356

AW-5356AW-5356AW-5356AW-5356

AW-5556AAW-5556AAW-5356AW-5356

AW-4043AAW-4043AAW-4043A

-

AW-4043AAW-4043AAW-4043A

-

AW-4043AAW-4043AAW-4043A

-

AW-4043AAW-4043AAW-4043A

-

AW-4043AAW-4043AAW-4043AAW-5356

AW-4043AAW-4043AAW-4043AAW-5356

AW-4043AAW-4043AAW-4043AAW-5356

AW-4043AAW-4043AAW-4043AAW-5356

AW-4043AAW-4043AAW-4043AAW-5356

AW-4043AAW-4043AAW-4043AAW-5356

AW-4043AAW-4043AAW-4043AAW-5356

AW-4043AAW-4043AAW-4043AAW-5356

AW-4043AAW-4043AAW-4043A

-

AW-4043AAW-4043AAW-4043A

-

AW-4043AAW-4043AAW-4043A

-

AW-4043AAW-4043AAW-4043A

-

AW-4043AAW-4043AAW-4043A

-

AW-4043AAW-4043AAW-4043AAW-5356

AW-4043AAW-4043AAW-4043AAW-5356

AW-4043AAW-4043AAW-4043AAW-5356

AW-4043AAW-4043AAW-4043AAW-5356

AW-4043AAW-4043AAW-4043AAW-5356

AW-4043AAW-4043AAW-4043AAW-5356

AW-4043AAW-4043AAW-4043AAW-5356

AW-4043AAW-4043AAW-4043AAW-5356

AW-5356AW-5356AW-5356AW-5356

AW-5356AW-5356AW-5356AW-5356

AW-5356AW-5356AW-5356AW-5356

AW-5356AW-5356AW-5356AW-5356

AW-5356AW-5356AW-5356AW-5356

AW-5556AAW-5556AAW-5356AW-5356

AW-5556AAW-5556AAW-5356AW-5356

AW-5356AW-5356AW-5356AW-5356

AW-5356AW-5356AW-5356

-

AW-5356AW-5356AW-5356

-

AW-5356AW-5356AW-5356

-

AW-5556AAW-5556AAW-5356

-

AW-5556AAW-5556AAW-5556AAW-5556A

AW-5556AAW-5556AAW-5556AAW-5556A

AW-5556AAW-5556AAW-5556AAW-5556A

AW-5556AAW-5556AAW-5556AAW-5556A

AW-5556AAW-5556AAW-5556AAW-5556A

AW-5356AW-5356AW-5356AW-5356

AW-5356AW-5154AAW-5356AW-5356

AW-5356AW-5154AAW-5356

AW-5154A

AW-5556AAW-5556AAW-5556AAW-5356

AW-5356AW-5154AAW-5356AW-5356

AW-5356AW-5154AAW-5356AW-5356

AW-5356AW-5154AAW-5356AW-5356

AW-5356AW-5154AAW-5356AW-5356

AW-5356AW-5154AAW-5356AW-5356

AW-5356AW-5154AAW-5356AW-5356

AW-5356AW-5154AAW-5356AW-5356

AW-5356AW-5154AAW-5356AW-5356

AW-5356AW-5154AAW-5356AW-5356

AW-5356AW-5554AW-5356

AW-5154A

AW-5356AW-5554AW-5356

AW-5154A

AW-5356AW-5554AW-5356AW-5554

1234

AW-5356AW-5356AW-5356AW-5356

AW-5356AW-5356AW-5356AW-5356

AW-5356AW-5356AW-5356AW-5356

1234

AW-5356AW-5154AAW-5356AW-5356

AW-5356AW-5154AAW-5356AW-5356

AW-5356AW-5154AAW-5356AW-5356

AW-5356AW-5154AAW-5356AW-5356

AW-5356AW-5154AAW-5356AW-5356

AW-5556AAW-5554AW-5356AW-5356

AW-5356AW-5356AW-5356AW-5356

AW-4043AAW-3103

AW-4043AAW-3103

AW-4043AAW-1050AAW-4043AAW-1050A

AW-4043AAW-1050AAW-4043AAW-1050A

AW-4043AAW-1050AAW-4043AAW-1050A

AW-4043AAW-1050AAW-4043AAW-1050A

AW-4043AAW-1050AAW-4043AAW-1050A

AW-4043AAW-1050AAW-4043AAW-1050A

AW-4043AAW-3103

AW-4043AAW-3103

AW-4043AAW-3103

AW-4043AAW-3103

AW-4043AAW-3103

AW-4043AAW-3103

AW-5356AW-5356AW-5356AW-5356

AW-5356AW-5356AW-5356AW-5356

AW-5356AW-5356AW-5356AW-5356

AW-5154AAW-5154AAW-5356

AW-5154A

FILLER WIRES FOR JOINING SIMILAR / DISSIMILAR ALUMINIUM ALLOYS

Line 1. Max Strength. Line 2. Max Corrosion Resistance. Line 3. Freedom from Cracking. Line 4. Best Colour Match when Anodising

PLEASE NOTE THESE TABLES ARE FOR GUIDANCE ONLY

FOR TECHNICAL ASSISTANCE PHONE OUR HELPLINE 01925 839983

Unit 5, Melford Court,Hardwick GrangeWoolstonWarrington WA1 4RZ

Tel: 01925 839983 Fax: 01925 839990Email: sales@westbrookwelding.co.ukWeb: www.westbrookwelding.co.uk

This brochure indicates our main Product Range, many others are available on request.

Images courtesy of BINZEL México and www.sxc.hu

AEROSPACE ALLOYS

ClassificationFSHWG PRODUCTS

AFNOR AMS AWS NF EN DMD-DMR MSRR OTHERALLOYS

ALUM

INIU

MST

AIN

LESS

STE

ELN

ICKE

LTI

TAN

IUM

CO

BALT

OTH

ERS

MIG/TIG ALCU6

MIG/TIG ALMG4Z2

MIG/TIG ALS17

MIG/TIG ALS15

MIG/TIG ALSI12

AU6 4191 ER 2319 - - 9500,45 -

AG4Z2 - ER 5280 - - - -

AS7G06 4246 ER 357 - 34,545 - -

AS5 4190 ER 4043 - 34,562 9500,32 -

AS12 4185 ER 4047 - - 9500,31 -

MIG/TIG 17,4 CU

MIG/TIG 347

MIG/TIG 410

MIG/TIG N155

MIG/TIG Z12CNDV12

Z5CNU 17,4,4 5825 ER 630 - 34,229 9500,240 -

Z6CNNb20, 10 5680 ER 347 1,4551 - 9500,2 -

Z8C13 5776 ER 410 1,4009 - 9500,205 -

Z12CNKDW20 5794 - - 34,222 9500,214 -

Z12CNDV12 - - - - - -

MIG/TIG NASTX

MIG/TIG HASTW

MIG/TIG NI263

MIG/TIG NI625

MIG/TIG NI718

NC22FeD 5798 ER NiMo2 - 34,491 9500,215 GE B50A450

ND24FeC 5786 ER NiMo3 - 34,493 9500,19 -

NCK20KTA 5966 - - 34,442 9500,16 GE B50A783

NC22DNb 5837 ER NiCrMo3 2,4831 34,436 9500,237 -

NC19FeNb 5832 ER NiFeCr2 2,4667 34,424 9500,220 GE B50TF202

MIG/TIG T 40

MIG/TIG T 60

MIG/TIG TA6V4

ASTM Gr 2 4951 ER Ti2 3,7035 34,071 9500-70 -

ASTM Gr 4 - ER Ti4 3,7065 - - -

ASTM Gr 5 4954 ER Ti6A14V 3,7165 34,776 9500,73 -

MIG/TIG CO 188

MIG/TIG FICO25

MIG/TIG CO 694

MIG/TIG CO T800

MIG/TIG CO 414

KCN22W 5801 - - 34,408 - -

KC20WN 5796 - - 34,415 9500,23 -

KC28W - - - 34,070 - -

KD28C - - - 34,071 - GE B50TF193

KC29NW - - - - - -

MIG/TIG CO 918 KC20NTa 5814 - - - - GE B50A824

MIG/TIG AZ92A

MIG/TIG BMS

MIG/TIG F66S

MIG/TIG MARVAL 8S

MA9 4395 AZ92A - - 9500,23 -

8CrMo12 - - - 34,173 - 8CD12

25CrMo4 - - - 34,174 -

X2NiCoMoTi8-8 6501 - - - - MAR 250

MIG/TIG SCVS 15CrMoV6 - - - 34,172 -

25CD4

15CDV6

WESTBROOKWELDING ALLOYS LTD.