available exclusively through authorized distributors ...messerwelding.com/mg welding distributor...

MG Welding ProductsN94 W14355 Garwin Mace DriveMenomonee Falls, WI 53051 USAP 800-558-8524 • F 262-255-5542

Statement of Liability: Due to variations inherent in specifi c applications, the technical information contained herein, including any information as to suggested product applica-tions or results, is presented without representation or warranty, expressed or implied. Without limitation, there are no warranties of merchantability or of fi tness for a particular purpose. Each process and application must be fully evaluated by the user in all respects, including suitability, compliance with applicable law and non-infringement of the rights of others, and Eutectic Corporation and its affi liates shall have no liability in respect thereof.

www.messerwelding.com

06/11 2.5K ©2008, Eutectic Corporation, ® Reg. T.M., Printed in the U.S.A.

Customer Service Technical Services 262-532-4677

Point of Purchase

Product Dia. Wt*

MG 200 1/8 1 lb.

MG 250 1/8 1 lb.

MG 260 1/8 1 lb.

MG 289 1/8 1/2 lb.

MG 289 1/8 1 lb.

MG 350FC 3/32 1/2 lb.

MG 400 1/8 1/2 lb.

MG 80TAC 1/8 1 lb.

MG 506 1/8 1 lb.

MG 518 1/8 1 lb.

MG 570 1/8 1 lb.

MG “Super” 600 1/8 1 lb.

MG 740 18 1 lb.

MG 765 1/8 1 lb.*Packed into easy to display, convenient and tamperproof clamshells.

Product Dia. Wt*

Slik Stik 308L 3/32 1 lb.






MG E6011 1/8 1 lb.

MG E6013 3/32 1 lb.

MG E6013 1/8 1 lb.

MG E6013 5/32 1 lb.

MG E7018 3/32 1 lb.

MG E7018 1/8 1 lb.

MG E7018 5/32 1 lb.

Impulse Buys!

MG’s Easy Strike™ and Aluminator™ displays provide distributors with impulse sales to your walk-in traffi c. Manufactured in the USA, these small package items are conveniently packed in self-supported display cartons for your counter or shelf.

MG EasyStrike 1/16” electrodes are formulated for quick starts and easy operation on even the smallest buzz box welders, including 110V machines. Perfect for thin gauge steels. 1lb tubes.

MG Aluminator 3/32” and 1/8” aluminum electrodes are conveniently packed in moisture resistant 1/2 pound tubes, and are excellent for small repairs.

Field Work!MG ‘s 6-Pak™ and Tool Box™ packs are excellent for fi eld work, including a durable plastic tool box to protect the electrodes.

The MG 6-Pak contains 1 lb. each of six of our most popular problem solving electrodes; for mild steel, cast iron, dissimilar steels, aluminum and gouging, all in a durable tool box.

The MG Tool Box includes 20 pounds of MG 500, 1/8” electrodes in a convenient, durable tool box.

Available Exclusively Through Authorized Distributors

Distributor Exclusive ProgramMG Welding Products

Wt*Wt*Wt*t*t***

1 lb.

1 lb.

1 lb.

1 lb.

1 lb

MIX MATCH

&MIX

MATCH

&

Choose from MG’s Premium Products or AWS Specifi cation Products

Create Your Own MG Display!

Build your walk-in business by catering to your specifi c customer base. Available in a 5 or 10 hook display, this attractive display allows you to pick and choose from MG’s most popular maintenance and AWS specifi cation rods, all in affordable, convenient 1 pound tamper-proof clamshells, for display and sale in your store.

1903


AWS Specification Mild Steel & Stainless Steel Products

MG 100 Series - Brazing & Soldering MG 400 Series - Aluminum MG 700 Series - Tool Steel & Wearfacing

MG 200 Series - Cast Iron MG 500 Series - Steels MG AWS - Mild Steel

MG 300 Series - Copper/Brass/Bronze MG 600 Series - Special Alloys MG AWS - Stainless Steel

MG’s “Easy to Remember” Product Selection Key

Slik-Stik ElectrodesProduct 3/32 1/8 5/32 3/16

E308-16 x x x xE308L-16 x x x xE309-16 x x x x

E309L-16 x x x xE310-16 x x x xE312-16 x x x xE316-16 x x x x

E316L-16 x x x xE316LVD-16 x x

E317L-16 x x xE347-16 x x x

MIG Wire TIG RodProduct 0.023 0.035 0.045 1/16 0.035 0.045 1/16 3/32 1/8

SOLI

D

ER308H x x x x xER308L x x x x x x x x

ER308LSi x x x x x x x

ER309 x x x x xSER309L x x x x x xER309LSi x x x x

ER310 x x xER316H x x x

ER316L x x x x x x x xER316LSi x x x x x

ER317L x x xER347 x x x x

FCW

ER308LT1-1 x x

ER309LT1-1 x xER316LT1-1 x x

STA

INLE

SS S

TEEL

MG’s AWS specifi cation Mild Steel and Stainless Steel electrodes are among the best running, most consistent, high quality specifi cation rods available today; all made right here in the USA.

Remember, meeting AWS specs simply means falling within a range of chemical analysis; it’s where you fall in each of those ranges that differentiates one rod from the next in terms of performance. Utilizing development and production experience from our well-known maintenance and repair products, MG has developed this outstanding line of AWS specifi cation rods available in a variety of packaging types at very competitive prices.

ElectrodesProduct 1/16 3/32 1/8 5/32 3/16

E6010 x x xE6011 x x x xE6013 x x x x xE7014 x x x

E7018 (H4) x x x xE7018-1 x x x

MIL

D S

TEEL

The unmatched weldabilty of MG Mild steel electrodes is supported by a wide range of packaging options including:

MG Slik Stik line of coated stainless electrodes has long been a favorite of welders in all industries. Packed in air-tight barrier bags for porosity-free welds right out of the box. MIG, TIG, and Flux cored wires round out the line.

“Superior alloys made in the USA”

• Point of Purchase Clamshells • Cardboard Boxes• Plastic Tubes • Hermetically Sealed Steel Cans

MG Welding ProductsMade in the U.S.A. for Distributors

Mild steel, stainless steel, cast iron, and other Maintenance & Repair welding electrodes and wires.

Unique products manufactured within a quality-focused, batch production process in our facility near Milwaukee, Wisconsin.

26 step quality program ensures quality, consistency and outstanding weldability time after time.

Wide product range from electrodes and wire, to powder alloys and brazing products.

Packaging options to fi t your inventory requirements and customer’s needs. 1#, 2#, 5#, 10#, 50# cardboard, plastic and metal cans.

Distributor ExclusiveMG Products are sold exclusively through distributors.

Local fi eld sales, technical support and product training.

Customer Service and Technical Service teams provide additional product support from our corporate offi ce in Menomonee Falls, Wisconsin.

Expanding Your OfferingsBecome a stocking MG distributor and you’ll receive access to our Eutectic® products...

• Expanded range of hardfacing wires • Specialty Maintenance & Repair electrodes • CastoDur® Diamond Plate (CDP) wear plate • Thermal spray powders • Equipment • CastoLab® Workshop Services

MG WeldingThe Only Real Alternative

Product Description Properties Applications

SILV

ER B

RA

ZE

MG 104High strength, easy fl ow, cadmium-free, fl ux coated silver brazing alloy. Also available bare. 45% Ag.

Tensile Strength: 73,000 psiWorking Temp.: 1275°FElongation: 24%

• Food and drug industry• For use on similar and dissimilar metals• Excellent for carbides and light gauge steels

MG 106Ultimate, super-active fl ux-coated silver braze. Cadmium-free, ultra thin fl owing. Also available bare. 56% Ag.


• Medical and laboratory equipment• Tubing• General maintenance and repair

SO

LDER

MG 120Cadmium free, low temperature, silver bearing soft solder for ferrous and non-ferrous metals. Available in spool, coil, syringe and paste forms.

Tensile Strength: up to 15,000 psiWorking Temp.: 430°FTypical Hardness: 15 BHN

• Dairy equipment• Oxygen lines• Sanitary apparatus

BU

ILD

-UP

MG 130Special multi-temperature nickel silver alloy for high strength joining and wear resistant build-up.

Tensile Strength: up to 113,800 psiWorking Temp.: 1400°F - 1750°FTypical Hardness: 140-200 BHN

• Overlay and build-up of gear teeth• Close fi tting joints• Shafts

Brazing and Soldering

Product Description Properties Applications Options

MA

CH

INA

BIL

ITY

MG 200 High nickel alloy for cast iron with maximum machinability.

Tensile Strength: up to 50,000 psiTypical Hardness: 160 BHNPolarity: AC or DC straight (-)

• Engine blocks• Gear housings• Filling holes and build-up of worn areas

Electrode

MIG

TIG

MG 250 A Ni99 electrode for cast iron. Tensile Strength: up to 45,000 psiTypical Hardness: 150 BHNPolarity: AC or DC reverse (+)

• Light cast iron welding• Unstressed castings• Engine blocks

PEN

ETR

ATIO

N

MG 220 Nickel-free electrode for diffi cult-to-weld cast iron. Non-machinable.

Tensile Strength: up to 60,000 psiTypical Hardness: 286 BHNPolarity: AC or DC reverse (+)

• Welding dirty, contaminated castings• Excellent for cracked machine bases• Build-up of worn areas

TOR

CH

MG 240 Bare cast iron rod for color match torch welding of cast iron.


• Torch welding light and heavy castings• Where color matched parts are critical• Filling and build-up of worn sections

HIG

H S

TREN

GTH MG 260 A Ni55 electrode for cast iron.


• Joining cast iron and nodular iron to steel• Excellent on heavy sections• Casting defects

MIG

TIG

MG 289 Super-strength alloy for dirty cast iron.

Tensile Strength: up to 65,000 psiTypical Hardness: 210 BHNPolarity: AC or DC reverse (+/-)

• Joining cast iron to steel• Transmission casings• Sewer pipes

Cast IronThe foundation on which our company was built, MG’s cast iron electrodes and brazing rods are the most consistent, easy to weld products available today. MG’s unique fl ux coatings provide welders with an assortment of quality alloys for high strength, crack resistant, porosity free, and machinable welds on even the dirtiest cast irons.


Tool Steel and Wearfacing Alloys


TOO

L ST

EELS MG 700 Premium quality, high-hardness

alloy for high speed tool steels.

Typical Hardness: 58-62 HRC Heat Treated: 63-65 HRC Hot Hardness: 56 HRC@110°F

• Cutting tools• Planing tools• Sliding surfaces

ELECTRO

DE

TIG

MG 710Unique alloy for repair and build-up of all “air” hardening steels. Excellent for multi-layer welding.

Typical Hardness: 55-60 HRC• Woodworking tools• Crusher jaws• Machine parts

FLUX

-COR

ED W

IRE

MIL

D

MED

IUM

MG 740 Compression-resisting build-up alloy for most steels.

Typical Hardness: 33-41 HRC• Structural steel• Cast steel parts• Farm equipment

EXTR

EME MG 745 Joining and build-up of

manganese steels.

Typical Hardness: as welded: 16-19 HRC work hardened: 48 HRC

• Rail frogs and switch points• Roller crushers• Hammers

MG 750 Joining and surfacing with the highest impact resistance.

Typical Hardness: as welded: 10 HRCwork hardened: up to 45 HRC

• Railroad tracks• Construction and mining equipment• Crushing hammers

MED

IUM

MED

IUM MG 755

A wear resistant alloy for high abrasion with medium Impact on steel, cast iron, or manganese steel.

Typical Hardness: as welded: 48-53 HRC

• Quarrying equipment• Agriculture equipment• Fan blades

FCW

MG 760 Abrasion and crack resistant forgeable build-up deposits.


• Dredger and bucket teeth• Hammer mill parts• Caterpillar drives

EXTR

EME

MIL

D

MG 765Chromium carbides offer severe abrasion and mild impact resistance.


• Construction and mining equipment• Crusher rolls• Conveyor screws

FCW

7065 Tubular

Electrode

Severe abrasion resistance, medium impact resistance, good oxidation resistance, high deposition high effi ciency.

Typical Hardness: as welded: 55-60 HRCDeposit Effi ciency: 96%

• Cast iron parts• Crusher rolls• Bucket teeth and edges

MED

IUM

MED

IUM

MG 769 Wearfacing electrode for moderate abrasion and impact.


• Machine parts• Earth moving equipment• Rock crushing machinery

EXTR

EME

MIL

D

MG 770Ultimate hard-facing electrode for high abrasion and medium impact.


• Grinding plates• Earth augers and scrapers• Annealing furnaces

FCW

7070 Tubular

Electrode

High resistance to severe abrasion from fi ne particles, contains complex carbides in an austenitic matrix.


• Brick extrusion augers• Pan scraper blades• Bulldozer parts

MG 788A super abrasion resisting composite alloy that deposits exposed tungsten carbide chips.

Typical Hardness: Matrix: 94 HRBCarbides: 77 HRC

• Earthmoving equipment• Agricultural machinery• Cement equipment

MG 799A super abrasion and frictional wear resisting alloy with excellent corrosion and heat resistance.


• Core drills• Sugar industry equipment• Augers

7090 Tubular

Electrode

Ultimate alloy for abrasion, impact, and heat resistance in severe environments.

Typical Hardness: Matrix: 62-64 HRCCarbides: Vickers 1950

• Hot coke conveyors• Kiln grates• Feed chutes

FCW

Wear occurs in nearly every industry, replacing parts is expensive. Utilizing extensive research and technology, MG’s line of wearfacing electrodes and wires offer ease of use with exceptional results for even your toughest abrasion and impact applications.

Impact ResistanceAbrasion Resistance

Obtaining the mechanical properties of welding without melting the base metal, the MG 100 Series provides strong, safe joints in a one-step, easy process. Utilizing fl exible, super-active fl ux coatings, MG’s cadmi-um-free silver alloys offer outstanding fl uidity with minimal fl ux, offer-ing you the most silver per pound and less clean up. Available in a variety of forms, MG’s solders offer an even lower temperature alternative with-out sacrifi cing quality or performance.


Slik-Sil

Slik-Sil


UN

IVER

SAL

MG 300 Universal bronze electrode for joining and surfacing.

Tensile Strength: up to 50,000 psiTypical Hardness: 160 BHNElongation: 20%

• Marine propellers• Valves• Hydraulic equipment

Electrode

CO

RR

OSI

ON

RES

ISTA

NC

E MG310AC

Tin/Bronze electrode, excellent color match; best when aHRC brazing galvanized sheets and when machining is required. Excellent corrosion resistance.

Tensile Strength: up to 60,000 psiTypical Hardness: 80-120 BHNElongation: 30-40%

• Gear wheels• Bearings• Defects in new castings

MG 320DC+

Tin/Bronze electrode with harder, more wear resistant deposits than the MG 310. Best for higher strength joining and cladding.


• Pumps• Impeller and turbines• Valve bodies

LOW

FU

MIN

G

MG 350Multi-deoxidized low fuming bronze. Bare and fl ux-coated. Use with 350F fl ux.

Tensile Strength: 40 to 50,000 psiWorking Temp.: 1600°FTypical Hardness: 80-110 BHN

• Bicycle frames• Galvanized duct work• Repair of ferrous and non-ferrous metals

Brazin

g

DEO

X C

OPP

ER

MG 390Special high-purity copper electrode for joining and build-up of copper and copper alloys.

Tensile Strength: up to 31,000 psiTypical Hardness: 50-60 BHNElongation: 35%

• Copper clad steel and cast iron• Parts needing high corrosion resistance• Build-up and repair of electrolytic copper

Electrode

Copper Base Metal WeldingUnmatched weldability, unmatched performance. The MG 300 series of products are specially alloyed to reduce the common problem of outgassing, while providing toughness, strength, and corrosion resistance. The brazing alloys are designed with low viscosity for improved fl uidity and capillary action for sound joining of even the tightest joints.


AR

C W

ELD

ING

MG 400Premium fl ux-coated aluminum joining and build-up alloy used with arc or gas. 4043 core.


• Machining errors• Tanks• Pipes• Foundry patterns

Electrode

Brazin

g

DIR

TY MG 420Flux-Cored aluminum brazing rod for dirty applications. Good color match.

Tensile Strength: up to 34,000 psiWorking Temp: 1,100°FElongation: 15-25%

• Build-up and repair• Joining dissimilar grades• Fabrication of aluminum

FLU

IDIT

Y

MG 460A special complex alloy solder that has excellent wetting and fl ow characteristics on most ferrous and non-ferrous metals.

Tensile Strength: up to 22,000 psiWorking Temp.: 509°FElongation: 30-65%

• Aluminum radiators• Zinc-based die castings• Anodized aluminum

HIG

H S

TREN

GTH

MG 470Maximum-strength self-fl uxing solder for joining, build-up, and hardfacing. Excellent color match and corrosion resistance.

Tensile Strength: up to 35,000 psiWorking Temp.: 710°F

• Aluminum extrusions • Repairing ladders, gutters and siding• Wearfacing aluminum

AluminumMG remains one of only a few aluminum electrode manufacturers around the world. Our proprietary formulations provide unmatched moisture resistance and consistent quality for strong, clean welds every time. Whether brazing or arc welding, joining or building-up, on clean or dirty parts, MG has the aluminum alloy that’s right for your job.


GEN

ERA

L PU

RPO

SE MG 80T-AC

Low amperage electrode for distortion control. Great for out-of-position and outdoor welding.

Tensile Strength: up to 80,000 psiYield Strength: up to 68,000 psiElongation: 24%

• Sheet metal fabrication• Angle Iron, Beams & Pipes• Build-up of worn surfaces

Electrode

MIGMG 500

Easiest-to-use, all-position electrode for mild steel. Ideal for small AC machines.


• Dissimilar gauge mild steels• Angle Iron• Build-up of worn surfaces

DIR

TY MG 506The special coating allows MG 506 to weld over extremely dirty, greasy, oil soaked, and/or rusty steels.


• Welding dirty, contaminated castings• Pipeline and tank welding• Oil and grease covered machine parts

LOW

HYD

RO

GEN MG 518

Premium AC/DC 7018 low hydrogen electrode with Moisture Guard™ coating.

Tensile Strength: up to 76,000 psiYield Strength: up to 69,000 psiElongation: 31-33%

• Carbon and medium tensile steels• Excellent on high sulfur or “tramp” steels• Construction grade steels

MG 540 Superior all-position controlled-hydrogen alloy for problem steels.


• Steels with improved machinability• Structural steels• High stress, high strained joint welding

TIG

HIG

H S

TREN

GTH

MG 530Very high strength electrode for welding low to medium carbon and low alloyed steels.


• Low alloy, high strength steels• Tank and container fabrication• I-beams and angle iron

GO

UG

ING

MG 570 High speed gouging and chamfering electrode.

300 amp welding machine recom-mended.

• Removing unwanted or defective welds• Preparing parts for machining• Preparing parts prior to welding

SteelsWhile steel may be the most common material, MG’s steel electrodes are anything but common. Utilizing proprietary formulations and a unique batch production process, MG products offer welders exceptional consistency, weldabilty, and mechanical properties above and beyond typical industry requirements.


DIS

SIM

ILA

R S

TEEL

S

MG 600The ultimate electrode for welding all types of steel.


• Tool and die repair• Joining unknown steels• Rebuilding shafts

Electrode

MIG

TIGMG 600 Popular problem-solving, universal electrode for all steels.


• Repairing worn parts• General maintenance and repair• Dissimilar metal combinations

EXTR

EME

TEM

PER

ATU

RES

MG 690Universal alloy for use in cryogenic as well as high heat applications.


• Parts subject to below 0°F conditions• Heat treatment equipment• Cryogenic equipment

MG 695High nickel alloy for welding nickel-chromium-molybdenum alloys


• Parts ranging from cryogenic to 1000°F• Low alloy steels• Dissimilar alloys

Special High Strength & Super AlloysThe MG 600 Series is a set of universal problem-solving alloys that every welder must have in their arsenal. Specially formulated for dissimilar or diffi cult to weld carbon and stainless steels, these alloys will help even the occasional welder through their toughest maintenance and repair jobs.

Super

www.messerwelding.com “Superior alloys made in the USA”


UN

IVER

SAL

MG 300 Universal bronze electrode for joining and surfacing.


• Marine propellers• Valves• Hydraulic equipment

Electrode

CO

RR

OSI

ON

RES

ISTA

NC

E MG310AC

Tin/Bronze electrode, excellent color match; best when aHRC brazing galvanized sheets and when machining is required. Excellent corrosion resistance.


• Gear wheels• Bearings• Defects in new castings

MG 320DC+

Tin/Bronze electrode with harder, more wear resistant deposits than the MG 310. Best for higher strength joining and cladding.


• Pumps• Impeller and turbines• Valve bodies

LOW

FU

MIN

G

MG 350Multi-deoxidized low fuming bronze. Bare and fl ux-coated. Use with 350F fl ux.

Tensile Strength: 40 to 50,000 psiWorking Temp.: 1600°FTypical Hardness: 80-110 BHN

• Bicycle frames• Galvanized duct work• Repair of ferrous and non-ferrous metals

Brazin

g

DEO

X C

OPP

ER

MG 390Special high-purity copper electrode for joining and build-up of copper and copper alloys.

Tensile Strength: up to 31,000 psiTypical Hardness: 50-60 BHNElongation: 35%

• Copper clad steel and cast iron• Parts needing high corrosion resistance• Build-up and repair of electrolytic copper

Electrode

Copper Base Metal WeldingUnmatched weldability, unmatched performance. The MG 300 series of products are specially alloyed to reduce the common problem of outgassing, while providing toughness, strength, and corrosion resistance. The brazing alloys are designed with low viscosity for improved fl uidity and capillary action for sound joining of even the tightest joints.


AR

C W

ELD

ING

MG 400Premium fl ux-coated aluminum joining and build-up alloy used with arc or gas. 4043 core.


• Machining errors• Tanks• Pipes• Foundry patterns

Electrode

Brazin

g

DIR

TY MG 420Flux-Cored aluminum brazing rod for dirty applications. Good color match.

Tensile Strength: up to 34,000 psiWorking Temp: 1,100°FElongation: 15-25%

• Build-up and repair• Joining dissimilar grades• Fabrication of aluminum

FLU

IDIT

Y

MG 460A special complex alloy solder that has excellent wetting and fl ow characteristics on most ferrous and non-ferrous metals.

Tensile Strength: up to 22,000 psiWorking Temp.: 509°FElongation: 30-65%

• Aluminum radiators• Zinc-based die castings• Anodized aluminum

HIG

H S

TREN

GTH

MG 470Maximum-strength self-fl uxing solder for joining, build-up, and hardfacing. Excellent color match and corrosion resistance.

Tensile Strength: up to 35,000 psiWorking Temp.: 710°F

• Aluminum extrusions • Repairing ladders, gutters and siding• Wearfacing aluminum

AluminumMG remains one of only a few aluminum electrode manufacturers around the world. Our proprietary formulations provide unmatched moisture resistance and consistent quality for strong, clean welds every time. Whether brazing or arc welding, joining or building-up, on clean or dirty parts, MG has the aluminum alloy that’s right for your job.


GEN

ERA

L PU

RPO

SE MG 80T-AC

Low amperage electrode for distortion control. Great for out-of-position and outdoor welding.


• Sheet metal fabrication• Angle Iron, Beams & Pipes• Build-up of worn surfaces

Electrode

MIGMG 500

Easiest-to-use, all-position electrode for mild steel. Ideal for small AC machines.


• Dissimilar gauge mild steels• Angle Iron• Build-up of worn surfaces

DIR

TY MG 506The special coating allows MG 506 to weld over extremely dirty, greasy, oil soaked, and/or rusty steels.


• Welding dirty, contaminated castings• Pipeline and tank welding• Oil and grease covered machine parts

LOW

HYD

RO

GEN MG 518

Premium AC/DC 7018 low hydrogen electrode with Moisture Guard™ coating.

Tensile Strength: up to 76,000 psiYield Strength: up to 69,000 psiElongation: 31-33%

• Carbon and medium tensile steels• Excellent on high sulfur or “tramp” steels• Construction grade steels

MG 540 Superior all-position controlled-hydrogen alloy for problem steels.


• Steels with improved machinability• Structural steels• High stress, high strained joint welding

TIGH

IGH

STR

ENG

TH

MG 530Very high strength electrode for welding low to medium carbon and low alloyed steels.


• Low alloy, high strength steels• Tank and container fabrication• I-beams and angle iron

GO

UG

ING

MG 570 High speed gouging and chamfering electrode.

300 amp welding machine recom-mended.

• Removing unwanted or defective welds• Preparing parts for machining• Preparing parts prior to welding

SteelsWhile steel may be the most common material, MG’s steel electrodes are anything but common. Utilizing proprietary formulations and a unique batch production process, MG products offer welders exceptional consistency, weldabilty, and mechanical properties above and beyond typical industry requirements.


DIS

SIM

ILA

R S

TEEL

S

MG 600The ultimate electrode for welding all types of steel.


• Tool and die repair• Joining unknown steels• Rebuilding shafts

Electrode

MIG

TIGMG 600 Popular problem-solving, universal electrode for all steels.


• Repairing worn parts• General maintenance and repair• Dissimilar metal combinations

EXTR

EME

TEM

PER

ATU

RES

MG 690Universal alloy for use in cryogenic as well as high heat applications.


• Parts subject to below 0°F conditions• Heat treatment equipment• Cryogenic equipment

MG 695High nickel alloy for welding nickel-chromium-molybdenum alloys


• Parts ranging from cryogenic to 1000°F• Low alloy steels• Dissimilar alloys

Special High Strength & Super AlloysThe MG 600 Series is a set of universal problem-solving alloys that every welder must have in their arsenal. Specially formulated for dissimilar or diffi cult to weld carbon and stainless steels, these alloys will help even the occasional welder through their toughest maintenance and repair jobs.

Super

www.messerwelding.com “Superior alloys made in the USA”

Product Description Properties Applications

SILV

ER B

RA

ZE

MG 104High strength, easy fl ow, cadmium-free, fl ux coated silver brazing alloy. Also available bare. 45% Ag.


• Food and drug industry• For use on similar and dissimilar metals• Excellent for carbides and light gauge steels

MG 106Ultimate, super-active fl ux-coated silver braze. Cadmium-free, ultra thin fl owing. Also available bare. 56% Ag.


• Medical and laboratory equipment• Tubing• General maintenance and repair

SO

LDER

MG 120Cadmium free, low temperature, silver bearing soft solder for ferrous and non-ferrous metals. Available in spool, coil, syringe and paste forms.


• Dairy equipment• Oxygen lines• Sanitary apparatus

BU

ILD

-UP

MG 130Special multi-temperature nickel silver alloy for high strength joining and wear resistant build-up.

Tensile Strength: up to 113,800 psiWorking Temp.: 1400°F - 1750°FTypical Hardness: 140-200 BHN

• Overlay and build-up of gear teeth• Close fi tting joints• Shafts

Brazing and Soldering


MA

CH

INA

BIL

ITY

MG 200 High nickel alloy for cast iron with maximum machinability.

Tensile Strength: up to 50,000 psiTypical Hardness: 160 BHNPolarity: AC or DC straight (-)

• Engine blocks• Gear housings• Filling holes and build-up of worn areas

Electrode

MIG

TIG

MG 250 A Ni99 electrode for cast iron. Tensile Strength: up to 45,000 psiTypical Hardness: 150 BHNPolarity: AC or DC reverse (+)

• Light cast iron welding• Unstressed castings• Engine blocks

PEN

ETR

ATIO

N

MG 220 Nickel-free electrode for diffi cult-to-weld cast iron. Non-machinable.


• Welding dirty, contaminated castings• Excellent for cracked machine bases• Build-up of worn areas

TOR

CH

MG 240 Bare cast iron rod for color match torch welding of cast iron.


• Torch welding light and heavy castings• Where color matched parts are critical• Filling and build-up of worn sections

HIG

H S

TREN

GTH MG 260 A Ni55 electrode for cast iron.


• Joining cast iron and nodular iron to steel• Excellent on heavy sections• Casting defects

MIG

TIG

MG 289 Super-strength alloy for dirty cast iron.

Tensile Strength: up to 65,000 psiTypical Hardness: 210 BHNPolarity: AC or DC reverse (+/-)

• Joining cast iron to steel• Transmission casings• Sewer pipes

Cast IronThe foundation on which our company was built, MG’s cast iron electrodes and brazing rods are the most consistent, easy to weld products available today. MG’s unique fl ux coatings provide welders with an assortment of quality alloys for high strength, crack resistant, porosity free, and machinable welds on even the dirtiest cast irons.


Tool Steel and Wearfacing Alloys


TOO

L ST

EELS MG 700 Premium quality, high-hardness

alloy for high speed tool steels.

Typical Hardness: 58-62 HRC Heat Treated: 63-65 HRC Hot Hardness: 56 HRC@110°F

• Cutting tools• Planing tools• Sliding surfaces

ELECTRO

DE

TIG

MG 710Unique alloy for repair and build-up of all “air” hardening steels. Excellent for multi-layer welding.

Typical Hardness: 55-60 HRC• Woodworking tools• Crusher jaws• Machine parts

FLUX

-COR

ED W

IRE

MIL

D

MED

IUM

MG 740 Compression-resisting build-up alloy for most steels.

Typical Hardness: 33-41 HRC• Structural steel• Cast steel parts• Farm equipment

EXTR

EME MG 745 Joining and build-up of

manganese steels.

Typical Hardness: as welded: 16-19 HRC work hardened: 48 HRC

• Rail frogs and switch points• Roller crushers• Hammers

MG 750 Joining and surfacing with the highest impact resistance.

Typical Hardness: as welded: 10 HRCwork hardened: up to 45 HRC

• Railroad tracks• Construction and mining equipment• Crushing hammers

MED

IUM

MED

IUM MG 755

A wear resistant alloy for high abrasion with medium Impact on steel, cast iron, or manganese steel.


• Quarrying equipment• Agriculture equipment• Fan blades

FCW

MG 760 Abrasion and crack resistant forgeable build-up deposits.


• Dredger and bucket teeth• Hammer mill parts• Caterpillar drives

EXTR

EME

MIL

D

MG 765Chromium carbides offer severe abrasion and mild impact resistance.


• Construction and mining equipment• Crusher rolls• Conveyor screws

FCW

7065 Tubular

Electrode

Severe abrasion resistance, medium impact resistance, good oxidation resistance, high deposition high effi ciency.


• Cast iron parts• Crusher rolls• Bucket teeth and edges

MED

IUM

MED

IUM

MG 769 Wearfacing electrode for moderate abrasion and impact.


• Machine parts• Earth moving equipment• Rock crushing machinery

EXTR

EME

MIL

D

MG 770Ultimate hard-facing electrode for high abrasion and medium impact.


• Grinding plates• Earth augers and scrapers• Annealing furnaces

FCW

7070 Tubular

Electrode

High resistance to severe abrasion from fi ne particles, contains complex carbides in an austenitic matrix.


• Brick extrusion augers• Pan scraper blades• Bulldozer parts

MG 788A super abrasion resisting composite alloy that deposits exposed tungsten carbide chips.

Typical Hardness: Matrix: 94 HRBCarbides: 77 HRC

• Earthmoving equipment• Agricultural machinery• Cement equipment

MG 799A super abrasion and frictional wear resisting alloy with excellent corrosion and heat resistance.


• Core drills• Sugar industry equipment• Augers

7090 Tubular

Electrode

Ultimate alloy for abrasion, impact, and heat resistance in severe environments.

Typical Hardness: Matrix: 62-64 HRCCarbides: Vickers 1950

• Hot coke conveyors• Kiln grates• Feed chutes

FCW

Wear occurs in nearly every industry, replacing parts is expensive. Utilizing extensive research and technology, MG’s line of wearfacing electrodes and wires offer ease of use with exceptional results for even your toughest abrasion and impact applications.

Impact ResistanceAbrasion Resistance

Obtaining the mechanical properties of welding without melting the base metal, the MG 100 Series provides strong, safe joints in a one-step, easy process. Utilizing fl exible, super-active fl ux coatings, MG’s cadmi-um-free silver alloys offer outstanding fl uidity with minimal fl ux, offer-ing you the most silver per pound and less clean up. Available in a variety of forms, MG’s solders offer an even lower temperature alternative with-out sacrifi cing quality or performance.


Slik-Sil

Slik-Sil

1903


AWS Specification Mild Steel & Stainless Steel Products

MG 100 Series - Brazing & Soldering MG 400 Series - Aluminum MG 700 Series - Tool Steel & Wearfacing

MG 200 Series - Cast Iron MG 500 Series - Steels MG AWS - Mild Steel

MG 300 Series - Copper/Brass/Bronze MG 600 Series - Special Alloys MG AWS - Stainless Steel

MG’s “Easy to Remember” Product Selection Key

Slik-Stik ElectrodesProduct 3/32 1/8 5/32 3/16

E308-16 x x x xE308L-16 x x x xE309-16 x x x x

E309L-16 x x x xE310-16 x x x xE312-16 x x x xE316-16 x x x x

E316L-16 x x x xE316LVD-16 x x

E317L-16 x x xE347-16 x x x

MIG Wire TIG RodProduct 0.023 0.035 0.045 1/16 0.035 0.045 1/16 3/32 1/8

SOLI

D

ER308H x x x x xER308L x x x x x x x x

ER308LSi x x x x x x x

ER309 x x x x xSER309L x x x x x xER309LSi x x x x

ER310 x x xER316H x x x

ER316L x x x x x x x xER316LSi x x x x x

ER317L x x xER347 x x x x

FCW

ER308LT1-1 x x

ER309LT1-1 x xER316LT1-1 x x

STA

INLE

SS S

TEEL

MG’s AWS specifi cation Mild Steel and Stainless Steel electrodes are among the best running, most consistent, high quality specifi cation rods available today; all made right here in the USA.

Remember, meeting AWS specs simply means falling within a range of chemical analysis; it’s where you fall in each of those ranges that differentiates one rod from the next in terms of performance. Utilizing development and production experience from our well-known maintenance and repair products, MG has developed this outstanding line of AWS specifi cation rods available in a variety of packaging types at very competitive prices.

ElectrodesProduct 1/16 3/32 1/8 5/32 3/16

E6010 x x xE6011 x x x xE6013 x x x x xE7014 x x x

E7018 (H4) x x x xE7018-1 x x x

MIL

D S

TEEL

The unmatched weldabilty of MG Mild steel electrodes is supported by a wide range of packaging options including:

MG Slik Stik line of coated stainless electrodes has long been a favorite of welders in all industries. Packed in air-tight barrier bags for porosity-free welds right out of the box. MIG, TIG, and Flux cored wires round out the line.

“Superior alloys made in the USA”

• Point of Purchase Clamshells • Cardboard Boxes• Plastic Tubes • Hermetically Sealed Steel Cans

MG Welding ProductsMade in the U.S.A. for Distributors

Mild steel, stainless steel, cast iron, and other Maintenance & Repair welding electrodes and wires.

Unique products manufactured within a quality-focused, batch production process in our facility near Milwaukee, Wisconsin.

26 step quality program ensures quality, consistency and outstanding weldability time after time.

Wide product range from electrodes and wire, to powder alloys and brazing products.

Packaging options to fi t your inventory requirements and customer’s needs. 1#, 2#, 5#, 10#, 50# cardboard, plastic and metal cans.

Distributor ExclusiveMG Products are sold exclusively through distributors.

Local fi eld sales, technical support and product training.

Customer Service and Technical Service teams provide additional product support from our corporate offi ce in Menomonee Falls, Wisconsin.

Expanding Your OfferingsBecome a stocking MG distributor and you’ll receive access to our Eutectic® products...

• Expanded range of hardfacing wires • Specialty Maintenance & Repair electrodes • CastoDur® Diamond Plate (CDP) wear plate • Thermal spray powders • Equipment • CastoLab® Workshop Services

MG WeldingThe Only Real Alternative

MG Welding ProductsN94 W14355 Garwin Mace DriveMenomonee Falls, WI 53051 USAP 800-558-8524 • F 262-255-5542

Statement of Liability: Due to variations inherent in specifi c applications, the technical information contained herein, including any information as to suggested product applica-tions or results, is presented without representation or warranty, expressed or implied. Without limitation, there are no warranties of merchantability or of fi tness for a particular purpose. Each process and application must be fully evaluated by the user in all respects, including suitability, compliance with applicable law and non-infringement of the rights of others, and Eutectic Corporation and its affi liates shall have no liability in respect thereof.


06/11 2.5K ©2008, Eutectic Corporation, ® Reg. T.M., Printed in the U.S.A.

Customer Service Technical Services 262-532-4677

Point of Purchase

Product Dia. Wt*

MG 200 1/8 1 lb.

MG 250 1/8 1 lb.

MG 260 1/8 1 lb.

MG 289 1/8 1/2 lb.

MG 289 1/8 1 lb.

MG 350FC 3/32 1/2 lb.

MG 400 1/8 1/2 lb.

MG 80TAC 1/8 1 lb.

MG 506 1/8 1 lb.

MG 518 1/8 1 lb.

MG 570 1/8 1 lb.

MG “Super” 600 1/8 1 lb.

MG 740 18 1 lb.

MG 765 1/8 1 lb.*Packed into easy to display, convenient and tamperproof clamshells.

Product Dia. Wt*







MG E6011 1/8 1 lb.

MG E6013 3/32 1 lb.

MG E6013 1/8 1 lb.

MG E6013 5/32 1 lb.

MG E7018 3/32 1 lb.

MG E7018 1/8 1 lb.

MG E7018 5/32 1 lb.

Impulse Buys!

MG’s Easy Strike™ and Aluminator™ displays provide distributors with impulse sales to your walk-in traffi c. Manufactured in the USA, these small package items are conveniently packed in self-supported display cartons for your counter or shelf.

MG EasyStrike 1/16” electrodes are formulated for quick starts and easy operation on even the smallest buzz box welders, including 110V machines. Perfect for thin gauge steels. 1lb tubes.

MG Aluminator 3/32” and 1/8” aluminum electrodes are conveniently packed in moisture resistant 1/2 pound tubes, and are excellent for small repairs.

Field Work!MG ‘s 6-Pak™ and Tool Box™ packs are excellent for fi eld work, including a durable plastic tool box to protect the electrodes.

The MG 6-Pak contains 1 lb. each of six of our most popular problem solving electrodes; for mild steel, cast iron, dissimilar steels, aluminum and gouging, all in a durable tool box.

The MG Tool Box includes 20 pounds of MG 500, 1/8” electrodes in a convenient, durable tool box.


Distributor Exclusive ProgramMG Welding Products

Wt*Wt*Wt*t*t***

1 lb.

1 lb.

1 lb.

1 lb.

1 lb

MIX MATCH

&MIX

MATCH

&

Choose from MG’s Premium Products or AWS Specifi cation Products

Create Your Own MG Display!

Build your walk-in business by catering to your specifi c customer base. Available in a 5 or 10 hook display, this attractive display allows you to pick and choose from MG’s most popular maintenance and AWS specifi cation rods, all in affordable, convenient 1 pound tamper-proof clamshells, for display and sale in your store.

available exclusively through authorized distributors ...messerwelding.com/mg welding distributor...

Documents