welding, brazing, cutting and heating equipment · welding, brazing, cutting and heating equipment...
TRANSCRIPT
industrial EquipmEnt ind_WEl_Ki_V01
WeldinG, BraZinG and CuttinG Kits
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
tesuco offers a range of oxygen / acetylene and oxygen / lpG kits to suit the industries they are designed for. this includes complete cutting and welding kits and kits for the plumbing industry where cutting equipment is not required.
WeldinG, BraZinG and CuttinG Kits
The Tesuco oxygen / acetylene and oxygen / LPG gas kits have been designed to include the equipment needed for the majority of welding, brazing and cutting work. The equipment fully meets the requirements and other referenced standards of AS 4839. The kits include both regulator and torch end flashback arrestors as required and a concise instruction manual that details correct use of the equipment for different processes.
specifications
Packaging Type Cardboard Box
Dimensions Product Only With Packaging
(H) 580 mm (W) 290 mm (D) 220 mm(H) 610 mm (W) 320 mm (D) 260 mm
Materials of Construction Kit Box
Equipment Tray Insert
Mild Steel Frame, Plastic Lid and BaseMoulded PlasticRubber Foam
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China
part no Gas serviceregulator
Configuration
Weight (kg)
nett Gross
GWKOAOxygen / Acetylene
Bottom Entry 12.70 13.80
GWKOASOxygen / Acetylene
Side Entry 12.70 13.80
GWKOL Oxygen / LPG Bottom Entry 12.40 13.40
GWKOLS Oxygen / LPG Side Entry 12.40 13.40
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
Kit inClusion taBle
The following table details the inclusions for each of the Welding, Brazing and Cutting Kits available from Tesuco. For more detailed information on the products, please see the reference table on the following page.
description part number GWKoa GWKoas GWKol GWKols
Heavy Duty Red Kit Box with Equipment Tray • • • •
Oxygen Regulator – Bottom Entry RC1BOX10 • •
Oxygen Regulator – Side Entry RC1SOX10 • •
Acetylene Regulator – Bottom Entry RC1BAC1.5 •
Acetylene Regulator – Side Entry RC1SAC1.5 •
LPG Regulator – Rear Entry RC1RLP4 • •
Flashback Arrestor Regulator End Standard Flow Fuel Gas FRSFD • • • •
Flashback Arrestor Regulator End Standard Flow Oxygen FRSOD • • • •
Twin Gas Hose 10m – Oxygen / Acetylene GWTWOA10 • •
Twin Gas Hose 10m – Oxygen / LPG GWTWOL10 • •
Flashback Arrestor Torch End Standard Flow Fuel Gas FTSFD • • • •
Flashback Arrestor Torch End Standard Flow Oxygen FTSOD • • • •
Blowpipe GWWH01 • • • •
Mixer 10mm GWMI10 • • • •
Welding Tip Oxygen / Acetylene Size #10 GWWT10 • •
Welding Tip Oxygen / Acetylene Size #12 GWWT12 • •
Welding Tip Oxygen / Acetylene Size #15 GWWT15 • •
Welding Tip Oxygen / Acetylene Size #20 GWWT20 • •
Brazing Tip Oxygen / LPG Size #8 GWBT08 • •
Brazing Tip Oxygen / LPG Size #12 GWBT12 • •
Brazing Tip Oxygen / LPG Size #15 GWBT15 • •
Brazing Tip Oxygen / LPG Size #20 GWBT20 • •
Cutting Attachment GWCA01 • • • •
Cutting Nozzle Oxygen / Acetylene Size #8 GWCNA08 • •
Cutting Nozzle Oxygen / Acetylene Size #12 GWCNA12 • •
Cutting Nozzle Oxygen / Acetylene Size #15 GWCNA15 • •
Cutting Nozzle Oxygen / LPG Size #8 GWCNL08 • •
Cutting Nozzle Oxygen / LPG Size #12 GWCNL12 • •
Cutting Nozzle Oxygen / LPG Size #15 GWCNL15 • •
Radius Bar and Pivot GWRB • • • •
Roller Guide GWRG • • • •
Welding Goggles GWG • • • •
Flint Lighter GWTF • • • •
Tip Cleaners GWTC • • • •
Combination Spanner GWS • • • •
Instruction Manual for Kits GWKIM • • • •
industrial EquipmEnt ind_WEl_Ki_V01
WeldinG, BraZinG and CuttinG Kits
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
plumBers WeldinG and BraZinG KitsThe Tesuco plumbers’ kit contains all the necessary items for welding, brazing and silver soldering applications. It does not include items not required by this industry, making this kit very cost effective. The equipment fully meets the requirements and other referenced standards of AS 4839.
specifications
Packaging Type Cardboard Box
Dimensions Product Only With Packaging
(H) 485 mm (W) 260 mm (D) 220 mm(H) 500 mm (W) 265 mm (D) 255 mm
Materials of Construction Kit Box Equipment Tray
PlasticMoulded Plastic
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China
part no Gas serviceregulator
Configuration
Weight (kg)
nett Gross
GWKPOAOxygen / Acetylene
Bottom Entry 7.10 7.60
GWKPOASOxygen / Acetylene
Side Entry 7.10 7.60
GWKPOL Oxygen / LPG Bottom Entry 6.80 7.30
GWKPOLS Oxygen / LPG Side Entry 6.80 7.30
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
Kit inClusion taBle
The following table details the inclusions for each of the Plumbers’ Welding and Brazing Kits available from Tesuco. For more detailed information on the products, please see the reference table on the following page.
descriptionpart number
GWKpoa GWKpoas GWKpol GWKpols
Light Weight Black Kit Box With Equipment Tray • • • •
Oxygen Regulator – Bottom Entry RC1BOX10 • •
Oxygen Regulator – Side Entry RC1SOX10 • •
Acetylene Regulator – Bottom Entry RC1BAC1.5 •
Acetylene Regulator – Side Entry RC1SAC1.5 •
LPG Regulator – Rear Entry RC1RLP4 • •
Flashback Arrestor Regulator End Standard Flow Fuel Gas FRSFD • • • •
Flashback Arrestor Regulator End Standard Flow Oxygen FRSOD • • • •
Flashback Arrestor Torch End Standard Flow Fuel Gas FTSFD • • • •
Flashback Arrestor Torch End Standard Flow Oxygen FTSOD • • • •
Blowpipe GWWH01 • • • •
Mixer 10mm GWMI10 • • • •
Welding Tip Oxygen / Acetylene Size #10 GWWT10 • •
Welding Tip Oxygen / Acetylene Size #12 GWWT12 • •
Welding Tip Oxygen / Acetylene Size #15 GWWT15 • •
Welding Tip Oxygen / Acetylene Size #20 GWWT20 • •
Brazing Tip Oxygen / LPG Size #8 GWBT08 • •
Brazing Tip Oxygen / LPG Size #12 GWBT12 • •
Brazing Tip Oxygen / LPG Size #15 GWBT15 • •
Brazing Tip Oxygen / LPG Size #20 GWBT20 • •
Flint Lighter GWTF • • • •
Tip Cleaners GWTC • • • •
Instruction Manual for Kits GWKIM • • • •
industrial EquipmEnt ind_WEl_Ki_V01
WeldinG, BraZinG and CuttinG Kits
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
reFerenCes For FurtHer inFormation on Kit Components
The following table details where further information and specifications are available for the products included in each of the kits.
product Catalogue sections page reference
Regulators Industrial EquipmentRegulators and FlowmetersSingle StageRC Range
IND_REG_SS_RC_V01
Flashback ArrestorsRegulator End
Gas Safety EquipmentFlashback ArrestorsRegulator End
GSE_FBA_RE_V01
Flashback ArrestorsTorch End
Gas Safety EquipmentFlashback ArrestorsTorch End
GSE_FBA_TE_V01
Twin Gas Hose Industrial EquipmentWelding, Brazing, Cutting and HeatingTwin Hose5mm Internal Diameter
IND_WEL_TH_05_V01
Blowpipes, Mixers and Cutting Attachments Industrial EquipmentWelding, Brazing, Cutting and HeatingBlowpipes, Mixers and Cutting Attachments
IND_WEL_BA_V01
Welding and Brazing Tips Industrial EquipmentWelding, Brazing, Cutting and HeatingWelding and Brazing Tips and Heating BarrelsWelding and Brazing Tips
IND_WEL_TI_WB_V01
Cutting Nozzles Industrial EquipmentWelding, Brazing, Cutting and HeatingCutting and Gouging Nozzles
IND_WEL_NO_V01
Other Accessories Industrial EquipmentWelding, Brazing, Cutting and HeatingAccessoriesGeneral Accessories
IND_WEL_AC_GA_V01
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
industrial EquipmEnt ind_WEl_sh_05_V01
5 mm internal diameter sinGle Gas Hose
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
For inert gas applications, it is important that the hose used to convey the gas from the regulator to the operating equipment is colour coded correctly, is of good quality and meets the required standards. the single hose offered by tesuco meets (or exceeds) the requirements of as 1335 and is manufactured to very high specifications, ensuring long service life.
BulK Hose rolls (100 metre lenGtH)
Inert gas hose is available in 100 metre rolls. This allows for customised lengths to be cut from the roll when required. By fitting approved hose connections, like those supplied by Tesuco, a complete hose assembly can be made.
specifications
Packaging Type Plastic Wrapped
Dimensions Product Only With Packaging
(L) 100 m (Ø) 11 mm(H) 145 mm (Ø) 400 mm
Materials of Construction Cord Braided Rubber
Maximum Working Pressure 1,500 kPa
Markings TESUCOYear of ManufacturingGas TypePressureAustralian Standard
Standard AS 1335“Hose and Hose Assemblies for Welding, Cutting and Allied Processes”
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin Taiwan
part no Gas service ColourWeight (kg)
nett Gross
GWSHI Inert Gas Black 14.35 14.45
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
sinGle Hose inert Gas 5mm Hose set
Tesuco provides a hose set for inert gas. They are manufactured to AS 1335 including the strength tests for the end fittings. Hose fittings are marked with the assembly company as required by the standard.
specifications
Packaging Type Plastic Bag with Header Card
Materials of Construction Hose Fittings
Cord Braided RubberBrass
Maximum Working Pressure 1,500 kPa
Gas Service Inert Gas
Colour Black
Markings TESUCOYear of ManufacturingGas TypePressureAustralian Standards
Standard AS 1335“Hose and Hose Assemblies for Welding, Cutting and Allied Processes”
Inlet Connection 5/8-18 UNF RH Female
Outlet Connection 5/8-18 UNF RH Female
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China/Taiwan
part nodimensions (mm) Weight (kg)
product only
With packaging
nett Gross
GWSWIG3(L) 3 m(Ø) 11
(L) 420(W) 320(H) 28
0.50 0.60
industrial EquipmEnt ind_WEl_th_05_V01
5 mm internal diameter tWin Gas Hose
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
When using oxygen / acetylene and oxygen / lpG equipment, it is important that the hoses used to convey each gas from the regulators to the operating equipment are colour coded, are of good quality and meet the required standards. the twin hose offered by tesuco, meets (or exceeds) the requirements of as 1335 and is manufactured to very high specifications, ensuring long service life.
BulK Hose rolls (100 metre lenGtHs)
Twin hose for oxygen / acetylene and oxygen / LPG is available in 100 metre rolls. This allows for customised lengths to be cut from the roll when required. By fitting approved hose connections, like those supplied by Tesuco, a complete hose assembly can be made.
specifications
Packaging Type Plastic Wrapped
Dimensions Product Only With Packaging
(L) 100 m (W) 23 mm (H) 12 mm(H) 180 mm (Ø) 500 mm
Materials of Construction Cord Braided Rubber
Maximum Working Pressure 1,500 kPa
Markings TESUCOYear of ManufacturingGas TypePressureAustralian Standard
Standard AS 1335“Hose and Hose Assemblies for Welding, Cutting and Allied Processes”
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin Taiwan
part no Gas service ColourWeight (kg)
nett Gross
GWTWOAOxygen
Acetylene
Blue
Red27.35 27.45
GWTWOLOxygen
LPG
Blue
Orange25.10 25.20
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
tWin Hose oXYGen / aCetYlene 5 mm Hose sets
Tesuco has a range of hose sets available for oxygen / acetylene applications. They are manufactured to AS 1335 including the strength tests for the end fittings. Hose fittings are marked with the assembly company as required by the standard.
specifications
Packaging Type Plastic Bag with Header Card
Materials of Construction Hose Fittings
Cord Braided RubberBrass
Maximum Working Pressure 1,500 kPa
Gas Service OxygenAcetylene
Colour Oxygen Acetylene
BlueRed
Markings TESUCOYear of ManufacturingGas TypePressureAustralian Standard
Standard AS 1335“Hose and Hose Assemblies for Welding, Cutting and Allied Processes”
Inlet Connection Oxygen Fuel Gas
5/8-18 UNF RH Female5/8-18 UNF LH Female
Outlet Connection Oxygen Fuel Gas
5/8-18 UNF RH Female5/8-18 UNF LH Female
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China/Taiwan
part nodimensions (mm) Weight (kg)
product only
With packaging
nett Gross
GWTWOA2.5(L) 2.5 m(W) 23(H) 12
(L) 420(W) 320(H) 40
0.85 0.95
GWTWOA5(L) 5 m(W) 23(H) 12
(L) 420(W) 320(H) 60
1.44 1.54
GWTWOA10(L) 10 m(W) 23(H) 12
(L) 420(W) 320(H) 70
2.82 2.92
GWTWOA15(L) 15 m(W) 23(H) 12
(L) 420(W) 320(H) 100
3.90 4.00
industrial EquipmEnt ind_WEl_th_05_V01
5 mm internal diameter tWin Gas Hose
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
tWin Hose oXYGen / lpG 5 mm Hose sets
Tesuco has a range of hose sets available for oxygen / LPG applications. They are manufactured to AS 1335 including the strength tests for the end fittings. Hose fittings are marked with the assembly company as required by the standard.
specifications
Packaging Type Plastic Bag with Header Card
Materials of Construction Hose Fittings
Cord Braided RubberBrass
Maximum Working Pressure 1,500 kPa
Gas Service OxygenLPG
Colour Oxygen LPG
BlueOrange
Markings TESUCOYear of ManufacturingGas TypePressureAustralian Standard
Standard AS 1335“Hose and Hose Assemblies for Welding, Cutting and Allied Processes”
Inlet Connection Oxygen LPG
5/8-18 UNF RH Female5/8-18 UNF LH Female
Outlet Connection Oxygen LPG
5/8-18 UNF RH Female5/8-18 UNF LH Female
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China/Taiwan
part nodimensions (mm) Weight (kg)
product only
With packaging
nett Gross
GWTWOL2.5(L) 2.5 m(W) 23(H) 12
(L) 420(W) 320(H) 40
0.90 1.00
GWTWOL5(L) 5 m(W) 23(H) 12
(L) 420(W) 320(H) 60
1.50 1.60
GWTWOL10(L) 10 m(W) 23(H) 12
(L) 420(W) 320(H) 70
2.80 2.90
GWTWOL15(L) 15 m(W) 23(H) 12
(L) 420(W) 320(H) 100
3.80 3.90
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
industrial EquipmEnt ind_WEl_th_08_V01
8 mm internal diameter tWin Gas Hose
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
When using high flow oxygen / acetylene and oxygen / lpG equipment, it is important that the hoses used to convey each gas from the regulators to the operating equipment have an adequate internal diameter to provide the flow, are colour coded, of good quality and meet the required standards. For these applications, tesuco offers an 8 mm diameter hose that meets (or exceeds) the requirements of as1335 and is manufactured to very high specifications, ensuring long service life.
BulK Hose rolls (50 metre lenGtHs)
Twin hose with an internal diameter of 8 mm for oxygen / acetylene and oxygen / LPG is available in 50 metre rolls. This allows for customised lengths to be cut from the roll when required. By fitting approved hose connections, like those supplied by Tesuco, a complete hose set can be made.
specifications
Packaging Type Plastic Wrapped
Dimensions Product Only With Packaging
(L) 50 m (W) 30 mm (H) 15 mm(H) 170 mm (Ø) 460 mm
Materials of Construction Cord Braided Rubber
Maximum Working Pressure 1,500 kPa
Marking TESUCOYear of ManufacturingGas TypePressureAustralian Standard
Standard AS 1335“Hose and Hose Assemblies for Welding, Cutting and Allied Processes”
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin Taiwan
part no Gas service ColourWeight (kg)
nett Gross
GWTW8OAOxygen
Acetylene
Blue
Red17.90 17.95
GWTW8OLOxygen
LPG
Blue
Orange17.40 17.45
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
tWin Hose oXYGen / aCetYlene 8 mm Hose sets
Tesuco has a range of hose sets available with an 8 mm internal diameter for oxygen / acetylene applications. These are manufactured to AS 1335 including the strength tests for the end fittings. Hose fittings are marked with the assembly company as required by the standard.
specifications
Packaging Type Plastic Bag with Header Card
Materials of Construction Hose Fittings
Cord Braided RubberBrass
Maximum Working Pressure 1,500 kPa
Gas Service OxygenAcetylene
Colour Oxygen Acetylene
BlueRed
Markings TESUCOYear of ManufacturingGas TypePressureAustralian Standard
Standard AS 1335“Hose and Hose Assemblies for Welding, Cutting and Allied Processes”
Inlet Connection Oxygen Acetylene
5/8-18 UNF RH Female5/8-18 UNF LH Female
Outlet Connection Oxygen Acetylene
5/8-18 UNF RH Female5/8-18 UNF LH Female
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China/Taiwan
part nodimensions (mm) Weight (kg)
product only
With packaging
nett Gross
GWTW8OA5(L) 5 m(W) 30(H) 15
(L) 420(W) 320(H) 25
2.10 2.20
GWTW8OA10(L) 10 m(W) 30(H) 15
(L) 420(W) 320(H) 35
3.80 3.90
industrial EquipmEnt ind_WEl_th_08_V01
8 mm internal diameter tWin Gas Hose
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
tWin Hose oXYGen / lpG 8 mm Hose sets
Tesuco has a range of hose sets available with 8 mm internal diameter for oxygen / LPG applications. These are manufactured to AS 1335 including the strength tests for the end fittings. Hose fittings are marked with the assembly company as required by the standard.
specifications
Packaging Type Plastic Bag with Header Card
Materials of Construction Hose Fittings
Cord Braided RubberBrass
Maximum Working Pressure 1,500 kPa
Gas Service OxygenLPG
Colour Oxygen LPG
BlueOrange
Markings TESUCOYear of ManufacturingGas TypePressureAustralian Standard
Standard AS 1335“Hose and Hose Assemblies for Welding, Cutting and Allied Processes”
Inlet Connection Oxygen LPG
5/8-18 UNF RH Female5/8-18 UNF LH Female
Outlet Connection Oxygen LPG
5/8-18 UNF RH Female5/8-18 UNF LH Female
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China/Taiwan
part nodimensions (mm) Weight (kg)
product only
With packaging
nett Gross
GWTW8OL5(L) 5 m(W) 30(H) 15
(L) 420(W) 320(H) 25
1.90 2.00
GWTW8OL10(L) 10 m(W) 30(H) 15
(L) 420(W) 320(H) 30
3.80 3.90
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
industrial EquipmEnt ind_WEl_ba_V01
BloWpipe, miXers and CuttinG attaCHments
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
For welding, brazing, cutting and heating applications, tesuco offer a modular solution including a blowpipe, cutting attachments and a range of mixers to suit different applications.
BloWpipe
The Tesuco blowpipe can be used with the cutting attachment and tips, as well as the range of mixers and tips for welding / brazing and the barrels and tips for heating. The valves have double “O” ring seals and the blowpipe is marked according to AS 4839.
specifications
Packaging Type Shell Pack
Materials of Construction Internals Handle
Brass Die cast handle with red powder coated paint finish
Gas Service OxygenFuel Gas
Inlet Connection Oxygen Fuel Gas
5/8-18 UNF LH Male5/8-18 UNF RH Male
Markings TESUCODate of Manufacture
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China
part no
dimensions (mm) Weight (kg)
product only
With packaging
nett Gross
GWWH01(H) 245(W) 50(D) 54
(H) 380(W) 115(D) 70
0.59 0.66
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
miXers
All mixers feature hand tightening for ease of attachment to the blowpipe. The GWMI10 and GWMI13 mixers are suitable for both oxygen / acetylene and oxygen / LPG (natural gas) applications. The GWMI13LN is an injector mixer suitable for super heating oxygen / LPG tips GWHTL3 and GWHTL4 and also for the range of heavy duty heating tips GWHTLH1 – GWHTLH5. Mixers are marked according to AS 4839.
CuttinG attaCHments
Available in both a 90° and 180° head design, the Tesuco cutting torches with multi mixer, is suitable for both Type 41 (oxygen / acetylene) and Type 44 (oxygen / LPG) cutting nozzles. They feature hand tightening for ease of attachment to the blowpipe and are marked according to AS 4839.
specifications
Packaging Type Shell Pack
Materials of Construction Brass
Gas Service OxygenFuel Gas
Markings TESUCOMixer Type and SizeDate of Manufacture
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China
specifications
Packaging Type Shell Pack
Materials of Construction Brass
Gas Service OxygenFuel Gas
Outlet Connection Suit Type 41 and 44 Cutting Nozzles
Markings TESUCODate of Manufacture
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China
part no
dimensions (mm) Weight (kg)
product only
With packaging
nett Gross
GWMI10
(H) 88(W) 28(D) 28
(H) 190(W) 55(D) 28
0.12 0.19
GWMI13(H) 94(W) 28(D) 28
(H) 190(W) 55(D) 30
0.17 0.25
GWMI13LN(H)165(W) 28(D) 28
(H) 300(W) 120(D) 30
0.27 0.31
part no
dimensions (mm) Weight (kg)
product only
With packaging
nett Gross
GWCA01(H) 280(W) 80(D) 52
(H) 385(W) 115(D) 54
0.65 0.70
GWCA02(H) 280(W) 80(D) 52
(H) 405(W) 95(D) 54
0.65 0.70
industrial EquipmEnt ind_WEl_ti_Wb_V01
WeldinG and BraZinG tips
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
the correct tip should be selected for the type of gases being used, and processes being performed. tesuco has a wide range of welding and brazing tips for use with both acetylene and lpG in combination with oxygen.
WeldinG and BraZinG tips oXYGen / aCetYlene – tYpe 551
Oxygen and acetylene tips can be used for fusion welding of mild steel and brazing or silver soldering of many different materials. The Tesuco range of tips is available in different sizes. The tips are marked according to AS 4839.
specifications
Packaging Type Shell Pack
Materials of Construction Copper
Dimensions Product Only With Packaging Size 6-15 Size 20
(Ø) 9.5 mm
(H) 300 mm (W) 120 mm (D) 13 mm(H) 380 mm (W) 114 mm (D) 13 mm
Markings TESUCOTip Type, Gas ServiceTip SizeGas Pressure
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China
part nooxygen
pressure(kpa)
acetylenepressure
(kpa)
typical Consumption
(l/min)oxygen /acetylene
overall length(mm)
Weight (kg)
nett Gross
GWWT06 50 50 1.5 66 0.06 0.11
GWWT08 50 50 2 68 0.06 0.11
GWWT10 50 50 3 195 0.08 0.12
GWWT12 50 50 4 217 0.09 0.14
GWWT15 50 50 6.5 238 0.09 0.14
GWWT20 50 50 12 293 0.12 0.18
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
BraZinG tips oXYGen / lpG – tYpe 554
Oxygen and LPG tips can be used for the brazing of many different materials. They are available in different sizes and are marked according to AS 4839.
specifications
Packaging Type Shell Pack
Dimensions Product Only With Packaging Size 8-15 Size 20
(Ø) 9.5 mm
(H) 300 mm (W) 120 mm (D) 13 mm(H) 380 mm (W) 114 mm (D) 13 mm
Materials of Construction Copper
Markings TESUCOTip Type, Gas ServiceTip SizeGas Pressure
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China
part nooxygen
pressure(kpa)
acetylenepressure
(kpa)
typical Consumption
(l/min)oxygen /acetylene
overall length(mm)
Weight (kg)
nett Gross
GWWT08 50 50 2 68 0.06 0.11
GWWT12 50 50 4 217 0.09 0.14
GWWT15 50 50 6.5 238 0.09 0.14
GWWT20 50 50 12 293 0.12 0.18
industrial EquipmEnt ind_WEl_ti_hb_V01
HeatinG tips and Barrels
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
When heating processes are required the correctly sized heating tip should be selected for the type of gases being used and processes performed. tesuco has a one piece tip and barrel and a wide range of tips, barrels and adaptors to suit all requirements.
HeatinG tip oXYGen / aCetYlene
The one piece oxygen and acetylene tip can be used for multi-purpose general workshop heating applications. The tip is marked according to AS 4839.
specifications
Packaging Type Shell Pack
Dimensions Product Only With Packaging
(H) 71 mm (Ø) 19 mm(H) 380 mm (W) 114 mm (D) 13 mm
Materials of Construction Copper
Weight Nett Gross
0.19 kg0.25 kg
Markings TESUCOTip SizeTip Type, Gas ServiceGas PressureDescription
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China
part no
pressure (kpa)
typical Consumption(l/min)
oxygen acetylene oxygen acetylene
GWHT812 150 100 45 – 58 41 – 55
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
HeatinG Barrels
Heating barrels are made from tubular stainless steel and come in three lengths. Two bent types and one straight. Threads are to match the larger 13mm mixer at one end and the superheating tips at the other end.
super HeatinG tips oXYGen / aCetYlene
Tesuco ranges two sizes of oxygen / acetylene heating tips. These screw directly onto the stainless steel heating barrels. Tips are marked according to the requirements in AS 4839.
specifications
Packaging Type Plastic Bag with Header Card
Dimensions Product Only (Ø) 13 mm
Materials of Construction Stainless Steel
Markings TESUCOLength
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China
part nooverall length
(mm)packaging
(mm)
Weight (kg)
nett Gross
GWHBS450 490 (L) 580 (W) 13 (H) 13 0.20 0.22
GWHBS700 730 (L) 810 (W) 13 (H) 13 0.30 0.33
GWHBS735 740 (L) 840 (W) 13 (H) 13 0.35 0.33
specifications
Packaging Type Shell Pack
Dimensions Product Only With Packaging
(H) 62 mm (Ø) 19 mm(H) 190 mm (W) 56 mm (D) 22 mm
Materials of Construction Copper
Weight Nett Gross
0.11 kg0.13 kg
Markings TESUCOPart NumberOxygen PressureAcetylene Pressure
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China
part no tip sizepressure (kpa) typical Consumption (l/min) Heat output
(mJ/h)oxygen acetylene oxygen acetylene
GWHTA1 8 x 12 150 100 45 – 58 41 – 55 180
GWHTA2 12 x 12 200 100 74 65 215
industrial EquipmEnt ind_WEl_ti_hb_V01
HeatinG tips and Barrels
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
super HeatinG tips oXYGen / lpG
Tesuco has a range of four oxygen / LPG super heating tips to suit various heating applications. These tips screw directly onto the stainless steel heating barrels. Tips are marked according to the requirements in AS 4839.
specifications
Packaging Type Plastic Bag with Header Card
Materials of Construction Copper and Brass
Dimensions With Packaging (H) 115 mm (W) 130 mm (D) 45 mm
Markings TESUCOPart NumberOxygen PressureLPG Pressure
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China
part notip size
pressure(kpa)
typical Consumption
(l/min)
Heat output (mJ/h)
Weight (kg)
dimensions product only
(mm)oxygen lpG oxygen lpG
GWHTL1 18 x 12 500 100 200 50 280 0.15 (H) 78 (Ø) 22
GWHTL2 36 x 12 600 100 300 75 420 0.34 (H) 78 (Ø) 34
GWHTL3 48 x 12 600 100 400 100 560 0.56 (H) 78 (Ø) 44
GWHTL4 48 x 15 1000 300 600 150 840 0.58 (H) 78 (Ø) 44
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
HeaVY dutY HeatinG tips oXYGen / lpG
Tesuco has a range of five heavy duty oxygen / LPG heating tips to suit various very large heating applications. These tips require the GWHBA adaptor to screw onto the stainless steel heating barrels. Tips are marked according to the requirements in AS 4839.
adaptor
The adaptor allows the heavy duty heating tips to be fitted to the stainless steel barrels. It means instead of needing two different barrels the same common ones can be used for all heating tips.
part no description
GWHBA Threaded Adaptor to Suit Heavy Duty Heating Tips
specifications
Packaging Type Plastic Bag with Header Card
Dimensions With Packaging (H) 115 mm (W) 130 mm
Materials of Construction Copper and Brass
Markings TESUCOTip SizeOxygen PressureLPG Pressure
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China
specifications
Packaging Type Shell Pack
Dimensions Product Only With Packaging
(H) 39 mm (Ø) 19 mm(H) 190 mm (W) 55 mm (D) 20 mm
Materials of Construction Brass
Weight Nett Gross
0.29 kg 0.30 kg
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China
part notip size
pressure(kpa)
typical Consumption
(l/min)Heat
output (mJ/h)
Weight (kg)
dimensions product only
(mm)oxygen lpG oxygen lpG
GWHTLH1 H1 100-200 50 67-117 17-33 186 0.15 (H) 80 (Ø) 19
GWHTLH2 H2 200-300 50 98-213 25-53 298 0.16 (H) 80 (Ø) 19
GWHTLH3 H3 200-500 100 142-382 37-95 532 0.28 (H) 80 (Ø) 25
GWHTLH4 H4 300-600 100 233-473 60-188 663 0.42 (H) 80 (Ø) 35
GWHTLH5 H5 400-800 100-200 283-662 72-167 934 0.66 (H) 80 (Ø) 44
industrial EquipmEnt ind_WEl_no_V01
CuttinG and GouGinG noZZles
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
it is important to select the correct nozzle for the materials being used and the work being done. tesuco has a wide range of cutting and gouging nozzles to ensure you can select the correct one for the job. the range consists of both copper and brass nozzles and oxygen acetylene and oxygen lpG nozzle types are available.
sHeet metal noZZle oXYGen / aCetYlene – tYpe 41
Sheet metal cutting nozzles are specifically designed for cutting very thin mild steel sheet metal. The size and position of the pre-heat and cutting oxygen holes ensures minimal distortion to the metal.
specifications
Packaging Type Shell Pack
Dimensions Product Only With Packaging
(H) 71 mm (Ø) 19 mm(H) 190 mm (W) 55 mm (D) 20 mm
Materials of Construction Outer Shell Internals
Chrome Plated BrassCopper
Weight Nett Gross
0.09 kg0.10 kg
Markings TESUCONozzle SizeOxygen PressureAcetylene Pressure
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China
part noplate
thickness (mm)
oxygen pressure
(kpa)
acetylenepressure
(kpa)
Cutting speed
(mm/min)
typical Consumption(l/min)
oxygen acetylene
GWSMNA06 Sheet Metal 200 100 – 80 10
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
CuttinG noZZles oXYGen / aCetYlene – tYpe 41 (Copper)
Copper oxygen and acetylene cutting nozzles perform the same as traditional brass ones but have the advantage of better heat dissipation and less slag adherence. Nozzles are marked according to the requirements in AS 4839.
part noplate
thickness (mm)
oxygen pressure
(kpa)
acetylenepressure
(kpa)
Cutting speed
(mm/min)
typical Consumption(l/min)
oxygen acetylene
GWCNA06 6 200 100 500 11 2
GWCNA08 10 200 100 450 19 3
GWCNA12
12 200 100 380 38 4
20 250 100 360 45 5
GWCNA15
25 220 100 320 56 6
40 350 100 270 75 7
50 400 100 240 84 7
75 450 100 180 95 8
GWCNA20
100 400 100 150 134 9
125 450 100 150 155 10
GWCNA24
150 450 100 130 211 11
200 500 100 100 234 14
GWCNA32
250 600 100 90 420 20
300 600 100 90 420 20
specifications
Packaging Type Shell Pack
Dimensions Product Only With Packaging
(H) 71 mm (Ø) 19 mm(H) 190 mm (W) 55 mm (D) 20 mm
Materials of Construction Copper
Weight Nett Gross
0.09 kg0.10 kg
Markings TESUCONozzle Type and SizeOxygen PressureAcetylene PressurePlate Thickness Cutting Capacity
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China
industrial EquipmEnt ind_WEl_no_V01
CuttinG and GouGinG noZZles
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
CuttinG noZZles oXYGen / aCetYlene – tYpe 41 (Brass)
Traditional brass oxygen and acetylene cutting nozzles are favoured by many users, so Tesuco also offers a range of nozzles in this material. Nozzles are marked according to the requirements in AS 4839.
specifications
Packaging Type Shell Pack
Dimensions Product Only With Packaging
(H) 69 mm (Ø) 19 mm(H) 190 mm (W) 55 mm (D) 20 mm
Materials of Construction Brass
Weight Nett Gross
0.09 kg0.10 kg
Markings TESUCONozzle Type and SizeOxygen PressureAcetylene PressurePlate Cutting Capacity
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China
part noplate
thickness (mm)
oxygen pressure
(kpa)
acetylenepressure
(kpa)
Cutting speed
(mm/min)
typical Consumption(l/min)
oxygen acetylene
GWCNA06B 6 200 100 500 11 2
GWCNA08B 10 200 100 450 19 3
GWCNA12B
12 200 100 380 38 4
20 250 100 360 45 5
GWCNA15B
25 220 100 320 56 6
40 350 100 270 75 7
50 400 100 240 84 7
75 450 100 180 95 8
GWCNA20B
100 400 100 150 134 9
125 450 100 150 155 10
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
GouGinG noZZles Bent oXYGen / aCetYlene – tYpe 41
Gouging nozzles for use with oxygen and acetylene are designed to gouge out metal to the right dimensions when removing faulty welding. They are bent on an angle for ease of use in horizontal positions.
GouGinG noZZles straiGHt oXYGen / aCetYlene – tYpe 41
As with other gouging nozzles, this straight type is designed to gouge out metal to the right dimensions when removing faulty welding, in a vertical position. This model is for use with oxygen and acetylene.
specifications
Packaging Type Shell Pack
Dimensions Product Only With Packaging
(H) 97 mm (Ø) 19 mm(H) 190 mm (W) 55 mm (D) 20 mm
Materials of Construction Copper
Weight Nett Gross
0.12 kg0.13 kg
Markings TESUCONozzle Type and SizeOxygen PressureAcetylene Pressure
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China
specifications
Packaging Type Shell Pack
Dimensions Product Only With Packaging
(H) 69 mm (Ø) 19mm(H) 190 mm (W) 55 mm (D) 20 mm
Materials of Construction Copper
Weight Nett Gross
0.09 kg0.10 kg
Markings TESUCONozzle Type and SizeOxygen PressureAcetylene Pressure
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China
part nooxygen pressure
(kpa)acetylene
pressure (kpa)
typical Consumption (l/min)
oxygen acetylene
GWGNA32 500 100 61 15
GWGNA48 600 100 85 18
part nooxygen pressure
(kpa)acetylene
pressure (kpa)
typical Consumption (l/min)
oxygen acetylene
GWGNA32S 500 100 61 15
industrial EquipmEnt ind_WEl_no_V01
CuttinG and GouGinG noZZles
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
CuttinG noZZles oXYGen / lpG – tYpe 44
Oxygen and LPG cutting nozzles perform extremely well for certain applications. Due to less carbon in LPG, there is less slag adherence to the bottom of the cut. Nozzles are marked according to the requirements in AS 4839.
specifications
Packaging Type Shell Pack
Dimensions Product Only With Packaging
(H) 69 mm (Ø) 19 mm(H) 190 mm (W) 55 mm (D) 20 mm
Materials of Construction Body Internal
Chrome Plated BrassBrass
Weight Nett Gross
0.12 kg0.13 kg
Markings TESUCONozzle Type and SizeOxygen Pressure / LPG PressurePlate Cutting Capacity
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China
part noplate
thickness (mm)
oxygen pressure
(kpa)
acetylenepressure
(kpa)
Cutting speed
(mm/min)
typical Consumption(l/min)
oxygen acetylene
GWCNL06 6 200 100 500 11 2
GWCNL08 6 200 100 450 30 3.5
GWCNL1212 200 100 380 50 4
20 250 100 360 68 4.5
GWCNL15
25 220 100 320 72 5.5
40 350 100 270 90 5.5
50 400 100 240 99 5.5
75 450 100 180 111 6
GWCNL20100 400 100 150 149 6
125 450 100 150 171 6.5
GWCNL24150 450 100 130 228 7
200 500 100 100 256 9
GWCNL32250 600 100 90 456 14
300 600 100 90 456 14
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
GouGinG noZZles Bent oXYGen / lpG – tYpe 44
Gouging nozzles for use with oxygen and LPG are designed to gouge out metal to the right size when removing faulty welding. They are bent on an angle for ease of use in horizontal positions.
GouGinG noZZles straiGHt oXYGen / lpG – tYpe 44
As with other gouging nozzles, this straight type is designed to gouge out metal to the right dimensions when removing faulty welding, in a vertical position. This model is for use with oxygen and LPG.
specifications
Packaging Type Shell Pack
Dimensions Product Only With Packaging
(H) 123 mm (Ø) 18 mm(H) 190 mm (W) 55 mm (D) 20 mm
Materials of Construction Body Internal
Copper Brass
Weight Nett Gross
0.14 kg0.15 kg
Markings TESUCONozzle Type and SizeOxygen PressureLPG Pressure
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China
specifications
Packaging Type Shell Pack
Dimensions Product Only With Packaging
(H) 69 mm (Ø) 19 mm(H) 190 mm (W) 55 mm (D) 20 mm
Materials of Construction Copper
Weight Nett Gross
0.12 kg0.13 kg
Markings TESUCONozzle Type and SizeOxygen PressureLPG Pressure
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China
part nooxygen pressure
(kpa)acetylene
pressure (kpa)
typical Consumption (l/min)
oxygen acetylene
GWGNL32 500 100 94 12
GWGNL48 600 100 120 13
part nooxygen pressure
(kpa)acetylene
pressure (kpa)
typical Consumption (l/min)
oxygen acetylene
GWGNL32S 500 100 94 12
industrial EquipmEnt ind_WEl_aC_ga_V01
General aCCessories
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
tesuco has a range of accessories available. most of these items are included in the gas cutting and welding kits, but are available to purchase separately as replacements or as additional items.
Gas WeldinG GoGGles
The Tesuco goggles are the flip up design, which can be operated using one hand. When the shaded lenses are flipped up the user is still protected by a set of clear lenses. This also saves having to remove them in-between welding, brazing and cutting operations.
specifications
Packaging Type Plastic Bag with Header Card
Materials of Construction Body Lenses Strap
Moulded PlasticClear Plastic and Plastic Shade 5Black Elastic Nylon
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China
part nodimensions (mm) Weight (kg)
product only With packaging nett Gross
GWG(H) 190 (W) 75 (D) 85
(H) 320(W) 190(D) 75
0.13 0.15
triple Flint liGHter / triple Flint replaCement
The Tesuco triple flint lighter has three flints that can rotate for use as one flint wears out. Replacement triple flints are available separately and come in a pack of four (4).
specifications
Packaging Type Shell Pack
Materials of Construction Plated Steel
Marking TESUCO (Flint Gun Only)
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China
part nodimensions (mm) Weight (kg) pack
quantityproduct only With packaging nett Gross
GWTF(H) 175(W) 45(D) 20
(H) 300(W) 120(D) 29
0.11 0.13 1
GWTFR(H) 24(W) 24(D) 7
(H) 190(W) 55(D) 19
0.02 0.03 4
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
ComBination spanner
The combination spanner is designed to fit the hex sizes of all items in a gas cutting and welding kit. This includes the nozzle nut, hose fittings, roller guides and radius bar.
tip CleaninG set
During operation, cutting and welding tip holes can become blocked with slag deposits. The tip cleaning set comprises various sizes of round files designed to clear the holes of debris.
specifications
Packaging Type Plastic Pack with Header Card
Materials of Construction Zinc Plated Steel
Marking TESUCO
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China
specifications
Packaging Type Shell Pack
Materials of Construction Case Cleaning Tips
AluminiumSteel
Marking TESUCO
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China
part nodimensions (mm) Weight (kg)
product only With packaging nett Gross
GWS(H) 150(W) 65(D) 5
(H) 300(W) 125
(D) 50.17 0.19
part nodimensions (mm) Weight (kg)
product only With packaging nett Gross
GWTC(H) 70 (W) 25 (D) 14
(H) 190(W) 55(D) 19
0.03 0.05
industrial EquipmEnt ind_WEl_aC_ga_V01
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
roller Guide / radius Bar
Roller guides are used for accurate cutting where you wish to maintain a constant tip height off the plate. When combined with the radius bar, accurate circles can be cut. Roller guide wheel arms and radius bar is fully adjustable for various heights and circle sizes.
specifications
Packaging Type Roller Guide Radius Bar Roller Guide and
Radius Bar
Shell PackPlastic Bag with Header CardPlastic Bag with Header Card
Materials of Construction Roller Guide Body Arms / Wheels Radius Bar
BrassMild Steel / Chrome PlatedMild Steel / Chrome Plated
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China
part nodimensions (mm) Weight (kg)
product only With packaging nett Gross
GWRB(H) 320(W) 40(D) 16
(H) 510(W) 130(D) 16
0.18 0.20
GWRG(H) 110(W) 60(D) 30
(H) 300(W) 120(D) 29
0.23 0.27
GWRGR(H) 320(W) 40(D) 30
(H) 510(W) 130(D) 30
0.40 0.42
General aCCessories
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
industrial EquipmEnt ind_WEl_aC_ha_V01
Hose aCCessories
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
tesuco has a range of accessories for single and twin hose sets for both 5 mm and 8 mm id hose. the range includes a crimping tool, clips and various hose joiners and fittings.
CrimpinG tool
The crimping tool is specifically designed for use with the GWC5 clips to secure the hose barb once inserted into the ends of the hose. The tool is robust and easy to use and makes this a very simple fixing method.
Hose Clip
This hose clip is designed for use with 5 mm hose nut and tail. They are available as a spare part for hose repairs.
specifications
Packaging Type Shell Pack
Materials of Construction Black Steel with Blue Plastic Handgrip
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China
specifications
Packaging Type Shell Pack
Materials of Construction Mild Steel
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China
part no
dimensions (mm) Weight (kg)
product only
With packaging
nett Gross
A2100(H) 230(W) 50(D) 17
(H) 385(W)115(D) 24
0.47 0.54
part no
dimensions (mm) Weight (kg)pack
quantityproduct only
With packaging
nett Gross
GWC5D(H) 7
(Ø)16.50
(H)119(W) 55(D) 23
0.04 0.07 10
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
Hose Joiner
These male threaded hose joiners are designed for the temporary joining of two hose sets when longer lengths are required. They are available in left and right hand for oxygen and fuel gas hoses.
Hose nut and tail WitH Clip 5 mm
This type of nut and hose tail assembly is designed to be fitted into 5 mm hose, then secured with a clip using the special tool. They are available in left and right hand for oxygen and fuel gas hoses.
specifications
Packaging Type Shell Pack
Materials of Construction Brass
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China
specifications
Packaging Type Shell Pack
Materials of Construction Brass with Mild Steel Clip
Hose Barb To Suit 5 mm Hose
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China
part no Connectiondimensions (mm) Weight (kg)
product only With packaging nett Gross
GWHC345/8-18 UNF RH
Female(H) 29(Ø) 16
(H) 190(W) 55(D) 23
0.05 0.08
GWHC355/8-18 UNF LH
Female(H) 29(Ø) 16
(H) 190(W) 55(D) 23
0.05 0.08
part noinlet
Connection
dimensions (mm) Weight (kg)
product only With packaging nett Gross
GWHCF5/8-18 UNF LH
Female(H) 41(Ø) 19
(H) 190(W) 55(D) 23
0.05 0.08
GWHCI5/8-18 UNF RH
Female(H) 41(Ø) 19
(H) 190(W) 55(D) 23
0.05 0.08
industrial EquipmEnt ind_WEl_aC_ha_V01
Hose aCCessories
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
Hose ConneCtions / Hose Joiners 5 mm
This range of hose connection and joiner use a shroud and hose tail that screw into the 5 mm hose forming a very secure end fitting. A special tool should be used to fit them correctly. The connections are available in left and right hand for oxygen and fuel gas hoses. The joiner is suitable for either hose when a repair is required in the length of the hose.
Hose ConneCtions 8 mm
This range of hose connection are the same as those above but have a shroud designed for use with 8 mm ID hose. The connections are available in left and right hand for oxygen and fuel gas hoses.
specifications
Packaging Type Shell Pack
Materials of Construction Brass
Hose Connection To Suit 5 mm Hose
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China
specifications
Packaging Type Header Card
Materials of Construction Brass
Hose Connection To Suit 8 mm Hose
Warranty 1 Year (Manufacturer’s Defect)
Country of Origin China
part noinlet
Connection
dimensions (mm) Weight (kg)
product oonly With packaging nett Gross
GWLP112RH
5/8-18 UNF RHFemale
(H) 46(Ø) 19
(H) 190(W) 55(D) 23
0.06 0.09
GWLP240LH5/8-18 UNF LH
Female(H) 46(Ø) 19
(H) 190(W) 55(D) 23
0.06 0.09
GWLP265To Suit 5 mm
Hose(H) 63(Ø) 19
(H) 190(W) 55(D) 23
0.05 0.08
part noinlet
Connection
dimensions (mm) Weight (kg)
product only With packaging nett Gross
GWLP137U5/8-18 UNF LH
Female(H) 49(Ø) 19
(H) 150(W) 130(D) 20
0.06 0.09
GWLP242U5/8-18 UNF RH
Female(H) 49(Ø) 19
(H) 190(W) 55(D) 23
0.06 0.09
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
industrial EquipmEnt ind_WEl_ds_V01
Gas equipment displaY stand
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
the tesuco Gas equipment display stand has been designed to hold all of the gas equipment that you need, to ensure timely supply of the majority of your customers’ gas equipment requirements. From individual components and consumable items to full gas kits for oxygen / acetylene and oxygen / lpG, the display stand holds equipment in a compact arrangement that takes up minimal floor space. With a saving of over 40% compared with buying the individual items on the stand separately, the tesuco Gas equipment display stand is representative of quality and value.
displaY stand
specifications
Dimensions (H)1360 mm (W) 1245 mm (D) 660 mm
Materials of Construction Frame Slat Wall Shelves
Powder Coated SteelLaminated Timber / AluminiumLaminated Timber
part numbers description quantity
Flashback Arrestors
FRD Regulator End Standard Flow Oxygen / Fuel Twin Display Pack 1
FRHFD Regulator End High Flow Fuel Gas Display Pack 1
FRHOD Regulator End High Flow Oxygen Display Pack 1
FRQD4D Regulator End Standard Flow Quick Coupling Oxygen / Fuel Twin Display Pack 1
FRSFD Regulator End Standard Flow Fuel Twin Display Pack 3
FRSOD Regulator End Standard Flow Oxygen Twin Display Pack 3
FTD Torch End Standard Flow Oxygen / Fuel Twin Display Pack 1
FTHFD Torch End High Flow Fuel Gas Display Pack 1
FTHOD Torch End High Flow Oxygen Display Pack 1
FTQD1D Torch End Standard Flow Quick Coupling Oxygen / Fuel Twin Display Pack 1
FTSFD Torch End Standard Flow Fuel Twin Display Pack 3
FTSOD Torch End Standard Flow Oxygen Twin Display Pack 3
Brazing Tips – Oxygen / LPG
GWBT08 Brazing Tip Size 8 1
GWBT12 Brazing Tip Size 12 1
GWBT15 Brazing Tip Size 15 1
GWBT20 Brazing Tip Size 20 1
part numbers description
GWDB Display Stand
GWDBP Products for Display Stand – listed below
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
part numbers description quantity
Welding Tips – Oxygen / Acetylene
GWWT06 Welding Tip Size 6 1
GWWT08 Welding Tip Size 8 1
GWWT10 Welding Tip Size 10 2
GWWT12 Welding Tip Size 12 3
GWWT15 Welding Tip Size 15 2
GWWT20 Welding Tip Size 20 1
Cutting Attachment
GWCA01 Cutting Attachment 2
Blowpipe
GWWH01 Blowpipe 2
Cutting Nozzles – Oxygen / Acetylene
GWCNA06 Cutting Nozzle Size 6 1
GWCNA08 Cutting Nozzle Size 8 3
GWCNA12 Cutting Nozzle Size 12 3
GWCNA15 Cutting Nozzle Size 15 2
GWCNA20 Cutting Nozzle Size 20 2
GWCNA24 Cutting Nozzle Size 24 1
Cutting Nozzles – Oxygen / LPG
GWCNL08 Cutting Nozzle Size 8 2
GWCNL12 Cutting Nozzle Size 12 2
GWCNL15 Cutting Nozzle Size 15 2
GWCNL20 Cutting Nozzle Size 20 1
Sheet Metal Cutting Nozzle – Oxygen / Acetylene
GWSMNA06 Sheet Metal Nozzle Size 6 1
Gouging Nozzles
GWGNA32 Gouging Nozzle 1
GWGNL32 Gouging Nozzle 1
Kits
GWKOA Welding, Heating and Cutting Kit 1
GWKOL Brazing, Heating and Cutting Kit 1
Mixers
GWMI10 Mixer 10 mm 2
GWMI13 Mixer 13 mm 1
GWMI13LN Mixer 13 mm Long 1
industrial EquipmEnt ind_WEl_ds_V01
Gas equipment displaY stand
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
part numbers description quantity
Heating
GWHBS450 Heating Barrel 1
GWHBS700 Heating Barrel 1
GWHBA Heating Barrel Adaptor 1
GWHT812 Heating Tip Size 8 x 12 1
GWHTA1 Superheating Tip Size 8 x 12 1
GWHTA2 Superheating Tip Size 12 x 12 1
GWHTLH1 Heavy Duty Heating Tip Size H1 1
GWHTLH2 Heavy Duty Heating Tip Size H2 1
GWHTLH3 Heavy Duty Heating Tip Size H3 1
Hose
GWTWOA10 Twin Hose Oxygen / Acetylene 2
GWTWOA15 Twin Hose Oxygen / Acetylene 2
Tip Cleaning Set
GWTC Tip Cleaning Set 5
Flint Lighters
GWTF Triple Flint Lighter 5
GWTFR Triple Flint Replacement 3
Regulators and Flowmeter
RC1BAC1.5 Regulator 1 Stage Bottom Entry 2
RC1BARFG Regulator 1 Stage Bottom Entry 2
RC1BARFM Regulator 1 Stage Bottom Entry 1
RC1BOX10 Regulator 1 Stage Bottom Entry 2
RC1RLP4 Regulator 1 Stage Rear Entry 1
RCFL40 Flowmeter 1
Gauge Protectors
SPRGPBD Gauge Protector 50 mm 1
SPRGPRD Gauge Protector 50 mm 1
Goggles
GWG Goggles Flip Up Shade 5 2
Roller Guide
GWRG Roller Guide 2
GWRGR Roller Guide with Radius Bar 1
WELDING, BRAZING, CUTTING AND HEATING EQUIPMENT
product Catalogue sections page reference
Regulators
Industrial EquipmentRegulators and FlowmetersSingle StageRC Range
IND_REG_SS_RC_V01
Flashback ArrestorsRegulator End
Gas Safety EquipmentFlashback ArrestorsRegulator End
GSE_FBA_RE_V01
Flashback ArrestorsTorch End
Gas Safety EquipmentFlashback ArrestorsTorch End
GSE_FBA_TE_V01
Twin Gas Hose
Industrial EquipmentWelding, Brazing, Cutting and HeatingTwin Hose5mm Internal Diameter
IND_WEL_TH_05_V01
Blowpipes, Mixers and Cutting Attachments
Industrial EquipmentWelding, Brazing, Cutting and HeatingBlowpipes, Mixers and Cutting Attachments
IND_WEL_BA_V01
Welding and Brazing Tips
Industrial EquipmentWelding, Brazing, Cutting and HeatingWelding and Brazing Tips and Heating BarrelsWelding and Brazing Tips
IND_WEL_TI_WB_V01
Cutting NozzlesIndustrial EquipmentWelding, Brazing, Cutting and HeatingCutting and Gouging Nozzles
IND_WEL_NO_V01
Other AccessoriesIndustrial EquipmentWelding, Brazing, Cutting and Heating AccessoriesGeneral Accessories
IND_WEL_AC_GA_V01
reFerenCes For FurtHer inFormation on Kit Components
The following table details where further information and specifications are available for the products included on each of the display stands.