water testing meters category

WATER TESTING

EQUIPMENTS

Water testing equipments includes the testing of various samples and

measuring the intensity of pH, salt, oxygen and conductivity among

different kinds of water samples. Water testing equipments are used to

determine effluents discharge in water, ground water pollution, waste

water treatment etc. Water testing equipments are basically used to

assess the quality of water. The samples of water can be collected from

different sources be it public or from any agency. Samples for water testing

can be even taken from aquariums or wells. In a system where there is

more than one source of water, the locations of sampling are taken into

Water Testing Meters

TECHNOCRACY PVT. LTD.

consideration by the number of inhabitants served by each source. It is pretty

obvious that disinfected water can be always harmful, therefore to determine

whether the water is suitable or not, water testing equipments are used. These

equipments will provide the status about the impurity of water. There are

different types of water testing equipments and the applications of these

equipments vary as per their usage. These equipments can be portable, water

proof and are incorporated with automatic temperature compensation. Water

testing equipments have a large display and expanded memory and recall up

to 48 data sets.



Conductivity meters are water testing equipments

that measure the electrical conductivity in a solution.

These equipments are reliable and have data storage

of up to 100 samples group’s readings and are

supplied with software for interpretation logging as

well analysis. These are even incorporated with

plastic conductivity electrode and self diagnostic

with message codes display. The measuring

parameters of these equipments are resistivity, TDS,

salinity and temperature.

Dissolved oxygen meters are micro processor based

meters which can store data up to 600 groups and

are incorporated with adjustable barometric

pressure and salinity correction. Dissolved oxygen

meters have polar graphic type dissolved oxygen

electrode and takes very short time in polarization

combined with fast response and accurate

movement. The temperature ranges of these meters

vary from 0 degree Celsius to forty five degree

Celsius. The size and weight of these equipments are

(160X190X70) mm/880g.

Conductivity Meters

Dissolved Oxygen Meters

Types of Water Testing Equipments


Water hardness meters are considered as highly

economical and accurate. These devices are

extremely user friendly and are ideally used in

several research organizations, laboratories and

manufacturing plants. These equipments are

incorporated with micro processor which is based for

fast and accurate movements and automatic power

off after 10 min of use. Water hardness meters are

also provided with large LCD display pH or

conductivity and temperature simultaneously.

These meters are incorporated with advanced SMT

technology and are provided with excellent stability

and repeatability. These devices generally have a

large LCD display, automatic heat compensation

and are self diagnostic with message code display.

The temperature range is from 0 °C to 50°C with

sensitivity of + 0.50o C and is specifically used for

sampling the measurement of calcium iodine

concentration in the water.

Water Hardness Meters

Ion Specific Meters

pH meters are extremely economical and have micro

processors for fast and accurate measurements.

These meters are provided with large LCD display

and a low battery compensation indicator. These

even have an easy to replace module and the type of

electrode can be recognized automatically and is

shown in display during insertion. pH meters are

integrated with a special viewing angle designed of

water proof housing IP 67 rated.

Water test meters are instruments that are widely

used for research organizations, petrochemical

industries and for various environmental

departments. Test meters are of different types but

are controlled by micro computer and are provided

with digital display and direct reading. These devices

are easy to use, easy to maintain and gives stable

and reliable performance. The measuring range of

these equipments is from 0 to 1000mg/l and the

weight of the main unit is up to eight kilograms.

pH Meters

Water Test Meters



BOD analyzer is designed by the specific difference

in the principle pressure, where the water sample is

placed inside the incubator. The temperature inside

the incubators is set around twenty degree celsius for

approximate five days. These instruments are used

extensively in various research organizations,

medical laboratories, water quality monitoring and

several environmental protection departments.

Chemical oxygen demand analyzer is an instrument

used in a laboratory to measure the amount of

oxygen that is used in chemical reactions along with

measurement of total organic and inorganic pollution

in waste water. In other words, these equipments

check the amount of contamination in the water and

definitely have an adverse effect on the aquatic life.

These are also widely used in several medical

laboratories, water quality monitoring department

and environmental protection department.

BOD Analyzer

COD Analyer

COD analysis colorimeters are equipments that are

used in several research organizations and are

extremely useful in the process of colorimetric

analysis where a solution is examined by measuring

the wavelength of the light absorbed. These

equipments are extremely portable, user friendly and

are incorporated with LED display system. These

devices are supplied with four sample tubes, AC

adapter and an instruction manual that includes

several test procedures.

Electrochemical analyzer is a multi functional

electrochemical analysis system, which includes a

fast digital function generator, a potentiostat, a high

speed data acquisition circuitry and a galvanostat.

These equipments are widely used in several fields

such as education, metallurgy, geology and various

scientific research organizations. Moreover

electrochemical analyzers provide fast and accurate

measurement.

COD Analysis Colorimeter

Electrochemical Analyzer



Microprocessor based turbidity meter measures

extent to which water loses its transparency because

of the presence of suspended particulate matter in a

given sample. Turbidity meter is considered ideal

instrument for various research and general field

applications .These equipments are user friendly and

extremely portable incorporated with wide and auto

measurement of 0 to 1000 NTU. Micro processor

based turbidity meter is highly suitable for indoor and

outdoor applications and is provided with unique

optics structure that enables the instrument to read

low value.

Multi functional reactor is considered as an ideal

instrument for performing several functions and is

also necessary to determine the requirement of

oxygen prior to its release, so that the amount of

contamination level in water can be monitored and

controlled. These equipments are incorporated with

auto shut down at end of completion of the

procedure and a transparent lid.

Microprocesor Based Turbidity Meter

Multi Function Reactor

ORP meters are water testing equipments that are

used in monitoring water waste and for several other

applications such as aquarium, beverage,

photography, swimming and food processing. The

power supply of these devices is DC 9V battery,

006P, MN 1604 (PP3) or equivalent. These meters

are incorporated with professional ORP electrode

with high accuracy and extreme reliability. The

weights of these devices are approximately from

153g/0.34 LB.

Weiber water analyzers are dust proof, water proof,

are provided with anti chemical erosion and are

extremely portable. The wavelength range of these

devices is 410-650 nm with operational operating

capacity. The main features of these devices are they

have facilities like self recording, self analyzing, and

self reserving.

ORP Meter

Water Analyzers



TOC analyzers are considered as the most essential

equipments that are used for measuring the quality of

water during the process of purification of water used

for drinking purposes. These are also considered

ideal equipments to monitor the performance of

purification and distribution system in bio technology

industry. TOC is the amount of carbon in an organic

compound that indicates water quality or cleanliness

of pharmaceutical manufacturing equipment.

Water toxicity meter are water testing equipments

that are easy to operate, reliable, extremely

economical, deliver optimum performance and are

ideal for lab setting and onsite use. They are used for

several applications such as water companies,

health and environmental supervising authorities,

hospitals and water monitoring authorities. Water

toxicity meters can also be used to monitor waste

water which pollutes the rivers and several other

natural bodies.

TOC Analyzer

Water Toxicity Analyzer


www.acmasindia.com | www.cleanroom-equipments.com | www.measuring-meters.com

An ISO 9001 : 2208 | ISO 14001 : 2008 | ISO 13485

WHO: GMP Products | GLP Compliant Products

SALES OFFICE (HONG KONG)

SHOWROOM

SALES OFFICE (RUSSIA)

Unit D 28 11/F Wing Tat Comm,Bidg 97, Bonham Strand East,

Sheung Wan, Hong Kong (PRC)

Tel.: 0086-13929598046 0086- 18922303099

E-mail.: [email protected]

J-284 Sector 1 Bawana Industrial Estate, Bawana,

Delhi, INDIA-110039

Tel.: 0091-0-9312219738 (M) +91- 9717741167


Inmed Trade Street Ozerkovsky Embankment,

Unit No 50, Straine- 1, Off- 502, Moscow, Russia


Tel.: 0049- 79592345 | Email: [email protected]

SALES OFFICE (INDIA)

thOffice no. 506 & 507, 5 Floor, Plot no.- C-9,

Pearls Best Height-II, Netaji Subhash Place,

Pitam Pura, Delhi- 110034

Land Line No.: +91 - 11- 47619688,

Fax: +91-11-47619788


water testing meters category

Documents

samples of water

source of water

water proof

disinfected water

impurity of water

quality of water

water hardness meters

waste water treatment