“Packaging With A Conscience”

Multiplast Systems, Inc. - 440-349-0800 - multiplastsystems.com

bio-Lene 14 characteristics / applications whenadded to polypropylene or polyethylene

□ Formulated for enzyme consumption

□ Sustainable packaging solution provides alternative to non bio-based packaging.

□ Excellent injection molding, blow molding, and blown extrusion processability when added to polyprop\ylene extrusion processability when added to polyprop\ylene and polyethylene. Reduced tool clean-up and preventative maintenance.

□ Microwavable

□ Recyclable without effecting recycle stream

□ Excellent balance of stiffness, flexibility and hinge property coupled with excellent Environment Stress Cracking Resistance (ESCR) property Resistance (ESCR) property

□ Cost effective environmentally conscious value propositionDisclaimerThis information and our technical advice - whether verbal, in writing or by way of trials - are given in good faith but without warranty, and this also applies where proprietaryrights of third parties are involved. Our advice does not release you from the obligation to check its validity and to test our products as to their suitability for the intended purposesand uses. The application, use and processing of our products and the products manufactured by you on the basis of our technical advice are beyond our control and, therefore,entirely your own responsibility. Our products are sold in accordance with the current version of our General Conditions of Sale and Delivery.

Unless specified to the contrarUnless specified to the contrary, the values given have been established on standardized test specimens at room temperature. The figures should be regarded as guide valuesonly and not as binding minimum values. Please note that, under certain conditions, the properties can be affected to a considerable extent by the design of the mold/die, the processing conditions and coloring.

Under the recommended processing conditions small quantities of decomposition product may be given off during processing. To preclude any risk to the health and well-being of themachine operatives, tolerance limits for the work environment must be ensured by the provision of emachine operatives, tolerance limits for the work environment must be ensured by the provision of efficient exhaust ventilation and fresh air at the workplace n accordance with the Safety Data Sheet. In order to prevent the partial decomposition of the polymer and the generation of volatile decomposition products, the prescribed processing temperaturesshould not be substantially exceeded.

bio-Lene 14 is a Sierra Resins Masterbatch polymer additivebio-concentrate, formulated for enzyme consumption. MSI bio-Lene 14, when added to polypropylene or polyethylene, provides environmentallyfriendly packaging. The Masterbatch compound provides outstandingmoisture barriers properties, making it suited as an additive for personalcare and amenities product packaging such as tubes, caps, and fasteners. bio-lene 14 is used in film applications for bags.fasteners. bio-lene 14 is used in film applications for bags.

The emergence of technologies like injection stretch blow molding (ISBM), thin wall injection molding (TWIM) and thermoforming providecost effective production.

MSI bio-Lene 14 appearance and packagingPellet appearance Brilliant ivoryPackaging Gaylords / DrumsMolded or extruded Very good clarity when addedAppearance to clarified PP

Typical Physical PropertiesProperty Property ValueMelt Flow Index 2.0/6.0g/10 min @180c, 2.16 Kg./ ASTM D1238Specific Gravity 0.80/ 1.20/ ASTM D792Pellet Size 0.98/1.25Pellet Count/Weight 1.0/1.5 grams per 100 pelletsMoisture 0.3% max, as packaged

Multiplast Systems, Bio-Enhanced bio-Lene14Bioplastic Masterbatch Portfolio