vs 600 cs on-site poured concrete weighbridge...2019/04/10 · however, precia molen provides a set...
TRANSCRIPT
-
WW
W.PRECIAM
OLEN
.COM
WW
W.PRECIAM
OLEN
.COM
10-13-0
1-1 FT - 02/20
14
VS 600 CSOn-site poured concrete weighbridge
The VS 600 CS is a high-resistance kit weighbridge to mount on site, with a concrete platform that has been designed to meet severeapplication requirements.
The highly robust VS 600 CS is available with two capacities: 60 t and 80 t and two lengths 16 m and 18* m.
PlatformThe metal framework is made up of 6 side stringers, 2 endspacers and 2 central spacers to screw. It comes with barsdesigned for reinforcement. The whole set, directly mountedonto a Polyane film put onto the civil works, makes the casingperfectly adapted to concrete pouring.
The quantity of concrete to pour depends on the size of thebridge. For a 17.80 m weighbridge, approximately 13 m3 ofconcrete dosed at 320 kg/m3 are required.
Dimensions
Capacity: 60 t or 80t,
Scale division: 20 kg at 50 kg,
Height: 360 mm (of which 100 mm on ground).
European conformityThe whole set complies with the WELMEC 2.4 guide.
CDL digital load cell
Load cell characteristics Nominal unit capacity (Emax) of 30t,
Limit load 150% Emax,
Breakage load 300% Emax,
IP 68 waterproof (despite extended immersion),
Digital PM Net network technology with weight indicator,
Approved for trade use with CE according to R60 OIML testtrial.
Load cell environment
* Real length: 17.80 m.
The weighbridge is equipped with 8 stain-less steel compression digital load cellsplaced on sides under the spacersand accessible without any disas-sembly.
1. Upper plate
2. CDL 30 t or 50 t load cells
3. Cups
4. Compensation shims
5. Anti-rotation sheet
6. Lower plate
7. Embedded anchors
6
7
1
3
5
3
2
4
-
WW
W.PRECIAM
OLEN
.COM
Your s
StopsThe large-sized mechanical stops around the load cells offerprotection against shocks and enable keeping the slab aligned.
Putting the weighbridge into servicePutting the VS 600 CS into service requires several phases.
Preliminary phase:Creating the above ground civil works by a mason accordingto the weighbridge model with reservations for embedding ofload cell environments, end walls, blinding concrete andramps.
Mounting phase:Unloading the weighbridge and placing it onto civil works.Setting up load cell environments with dummy load cells.
Embedding and concrete phase:Embedding load cell environments by the mason andconcrete pouring.
Putting into service phase:Setting up load cells, cabling and connections, passage ofstandard truck for adjustments and regulatory checks.
Chronology of installation.
Civil works services and required materials are not supplied by PRECIA MOLEN. However, PRECIA MOLEN provides a set of civil worksplans/guides.
Options & Accessories
* The seal is set at the weighbridge entry and exit (6mm thickness).
T-shaped elastomer seal* i35 indicator BI 400 terminal D570 remote display
Illustrations not contractual. Precia-Molen reserves the right to alter the characteristics of the equipment described in this brochureat any time..
pecialist
Headquarters & Factory PRECIA-MOLENBP 106 - 07000 Privas - FranceTel. 33 (0) 475 664 600Fax 33 (0) 475 664 330E-MAIL [email protected]
RCS: 386 620 165 RCS Aubenas