contentshomel.vsb.cz/~voz29/files/ons.pdf · the amo aun parameter pusecond indicates if the pickup...

14
EN0000DE00EN_0000 © 2005 Siemens AG 1 General features Siemens General features Contents 1 Parallel Subscriber - One Number Service (ONS) . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1 General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.2 Service Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1.3 AMO Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1.4 Relevant AMOs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Upload: votu

Post on 18-Jul-2018

218 views

Category:

Documents


0 download

TRANSCRIPT

General features Siemens

General features

Contents1 Parallel Subscriber - One Number Service (ONS) . . . . . . . . . . . . . . . . . . . . . . . . . . 31.1 General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31.2 Service Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71.3 AMO Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91.4 Relevant AMOs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

EN0000DE00EN_0000© 2005 Siemens AG

1

2

General featuresSiemens

EN0000DE00EN_0000© 2005 Siemens AG

One Number Service (ONS) Siemens

1 Parallel Subscriber - One Number Service (ONS)

1.1 General Information

The feature Parallel Ringing – One Number Service (ONS) is used for one person using dif-ferent phones. Incoming calls are signalled at more than one destination in parallel. An incom-ing call is blocked if one station of the parallel ringing station group is busy, the caller recieves the busy signal. This feature is only active for voice calls.

Parallel Ringing with one number

● Subscribers B1, B2 and B3 must be configured in the same physical node.

● Instead of B2 or B3, one GSM mobile phone, or another external device, may be in an ex-ternal network with the special ringing function "search mobile phone first" (SMPF).

● Maximum number of phones within one ONS group: 3

● For incoming calls the ONS master extension number B is equal to B1.The features call waiting, call forwarding (CFW), do not disturb (DND), message waiting indication (MWI), callback and call logs are ONS group features.

DSS1 phones (S0), attendants and analog voice devices connected to an A/B adapter are not supported !

EN0000DE00EN_0000© 2005 Siemens AG

3

4

One Number Service (ONS)Siemens

● For outgoing calls from each internal ONS member the master number B is used; same COS, same ITR group, same DPLN group, same COSX group. This is ensured by using a permanent PIN of the ONS master for all internal ONS members. The permanent PIN cannot be modified by the ONS device; only a short PIN can be activated.

All internal ONS members have the same idle display showing the ONS master number.

For a basic incoming call to the ONS group the call is signalled at all ONS members. All ONS members see the calling party information. After the call is answered by one ONS member all other group members are disconnected from the call. The whole ONS group is called no matter whether the ONS master number or a secondary ONS number has been dialed.

When a call is made to an ONS master who is OOS the caller is notified of this. If the call is placed to another ONS member who is in an OOS state then the call will ring the other ONS group members.

For the ONS call to the external number CFNR is prevented; in this case the external call is released but the internal ONS members are still ringing. This avoids the ONS call only reaching the mailbox of the GSM network although the ONS person is near one of the internal ONS phones.

Trunks who cannot receive reliable answer and disconnect signalling must not be used for the ONS call to the external member.

The information from the GSM via the CO is not as detailed as within the PBX network (espe-cially in negative cases when the mobile phone cannot be alerted) and therefore it is recom-mended that the mobile phone is always turned on.

Mail-box

CFNR

X

EN0000DE00EN_0000© 2005 Siemens AG

One Number Service (ONS) Siemens

Features

● When an ONS group is created the call forwarding activation status of the ONS master is relevant for the incoming ONS calls. The idle display is updated at the internal ONS members if necessary. Any change of this status by any of the internal ONS members leads to the ONS group call forwarding status change. Changes via AMO or via ACL serv-ice e.g. TSKA are also effective for the whole ONS group. Call deflect from any ONS member alerted by an incoming call to the fixed CFU destination of the ONS group is pos-sible.

● Do not disturb is also an ONS group feature. The ONS master status for DND determines the DND group status. Any internal ONS member can change this DND status for the whole ONS group. Changes via AMO or via ACL service are also effective for the whole ONS group.

● If call waiting as ONS group feature is on then a second call to the ONS group is alerting the group even if one ONS member is busy. Call waiting can be (de)activated by a key at an optiPoint ONS member. If all internal ONS devices are anates then the call waiting fea-ture is (de)activated by the AMO AUN parameter PUSECOND.

● The AMO AUN parameter SMPF (search mobile phone first) indicates for a basic call to an ONS group the following:

● When SMPF = YES the mobile phone is called first before the internal ONS members are called (waiting a time period specified by the AMO-CTIME parameter SMPFTIME).

● When (SMPF=NO) the internal ONS members are also called immediately. SMPF is not considered e.g. for a consultation call to the ONS group or if call waiting is active for this call. The parameter SMPF will be set to YES automatically if an exter-nal subscriber is configured in an ONS-group but can be changed to NO, .

● Message waiting indication (MWI) is an ONS group feature. MWI’s to the ONS group are stored at the ONS master but the status of the MWI led is shown at all internal ONS mem-bers and can be read out and deleted from any ONS group member.

● Call Logs of the ONS group are stored in the call log of the ONS master and can be ac-cessed by any internal digite ONS members. Simultaneous menu access to the call log is prevented. Call log is only supported if the ONS master is a digite.

● Callback by an ONS member to another station is not an ONS group feature. Callback ex-ecution only alerts the ONS member who has activated callback. Callback activation to the ONS group, however, is an ONS feature. Message waiting callback to the ONS group is also an ONS group feature.

● Recalls to an ONS member are not ONS group calls; they are only alerting the ONS mem-ber who has previously transferred the call.

● Camp on or override to a busy ONS group is possible.

EN0000DE00EN_0000© 2005 Siemens AG

5

6

One Number Service (ONS)Siemens

● MLPP, Emergency Override and emergency disconnect is not supported from and to ONS group members.

● ONS master and ONS secondary extension numbers can not appear at any other keyset. ONS devices may have secondary lines from any other non ONS keysets.

● One ONS member can call another ONS member of the same group (ONS internal call). This call does not alert any other ONS group members. Therefore it is possible to establish a conference with outside partners and with members of the same ONS group.

● Transfer of ONS connections from one internal ONS member to another internal ONS member is possible.

● Transfer by active extension: A digite ONS member presses the parkkey in talk state. Then the call is parked and the park key led of all digite ONS group members starts flashing. The former active ONS subscriber goes onhook and the call can be retrieved by the park key.

● Transfer by passive extension: If there is one basic ONS connection active then another ONS member can retrieve the call by pressing the park key. Anates and digites without a park key can use the associated access code for parking and retrieving a call.

● Master devices of an ONS group are allowed to be members (but not masters) of a hunt group. Secondary devices of an ONS group must not be configured as masters or mem-bers of a hunt group. Whenever an ONS group is seized via a hunt group all members will ring up to the expiry of the answer advance timer.The SMPF flag is ignored when the ONS group is rung via a hunt group.

● ONS group for CHESE (chief secretary group) members is not supported.

● ONS group members cannot be members of call pickup groups.

● ONS group members must not be configured as night stations.

● ONS group members must not be configured as ACD agents.

● Last number redial, saved number redial, speed dialing, namekeys, direct station select keys and reminders are available for each ONS device separately.

EN0000DE00EN_0000© 2005 Siemens AG

One Number Service (ONS) Siemens

1.2 Service Information

● The parallel ringing station group is configured via AMO AUN with parameter TYPE=ONS.

● Internal ONS members are assigned by the AMO AUN as group members. The ONS group consists of exactly one ONS master (who has the SDAT parameter PARARNGM) and sec-ondary members (who have the SDAT parameter PARARNGS).

● The external ONS member number is assigned by the parameter REMAC. For this exter-nal member a virtual secondary device has to be added as ONS member. This virtual sec-ondary device is configured via AMO SCSU with DVCFIG=AUXDIGI and INS=ACLSTN and via AMO SDAT parameter PARARNGS.

● The maximum number of ONS members is 3. Anates, digites and virtual secondary devic-es are considered as ONS members. A virtual ONS master and a REMAC number does not count as ONS members in this respect.

● The ONS master must have a PIN activated with the following AMO-PERSI COPIN values: PINDUR=PERM (permanent), PARARNGM = YES (pararing master), COSHOME = YES, DISPRSTN = NO (no display of remote station) and IDHOME = NO.

● With the AMO AUN parameter SMPF (search mobile phone first) = YES/NO it is specified for basic calls to the ONS group if the mobile phone is called first before the internal ONS members are called (waiting a time period specified by the AMO-CTIME parameter SMPF-TIME) or if the internal ONS members are also called immediately.

● The AMO AUN parameter ONSSNS indicates if the number of an ONS secondary member should be suppressed or not.

● The AMO AUN parameter PUSECOND indicates if the pickup of a second call to the ONS group is enabled or not. This AMO parameter is relevant for an ONS group where the in-ternal members are only anates. For an ONS group consisting of optiPoint ONS members call waiting can be (de)activated via key at the device.

● In addition to the PUSECOND parameter: If there is an ONS group with only anate mem-bers (and maybe a virtual secondary member and a REMAC) and the feature call waiting is required to be active for this ONS group then it is recommended to add a virtual ONS master to this ONS group. Only then is the call waiting feature is supported. This virtual ONS master must not have the COSSU COS parameter MB (mailbox) assigned and must not have a MB key assigned via AMO TAPRO. This is necessary to ensure that a callback to this anate ONS group is handled according to CCNR (call completion no reply) and not according to the mailbox function (where the mailbox key doesn’t exist).

● Up to 2000 parallel ring groups (this is an ONS group or a call pickup group) are supported within one HiPath 4000 node.

● Subscribers can not be added to ONS groups after the ONS group is configured. In this case regenerate, delete and re-add the ONS group with the new subscriber information.

EN0000DE00EN_0000© 2005 Siemens AG

7

8

One Number Service (ONS)Siemens

● Subscribers of an ONS group must be in the same ITR-group.

● There is no busy signaling of the ONS master number, if the external subscriber has taken a call.

EN0000DE00EN_0000© 2005 Siemens AG

One Number Service (ONS) Siemens

1.3 AMO Usage

The AMO installation steps correspond to the following example. The installation of the CMI subscriber is not considered here.

Installation steps:

● Add the real subscribers of the ONS group

● Add the virtual subscriber of the ONS group

● Set the subscriber authorizations

● Define the used COPIN class for the Master-PIN

● Assign the Master-PIN to the ONS-Master

● Add the ONS group

● Additional control mechanisms

ISDNISDN

COPIN 15 forMaster-PIN

ONS group 8

Calls: 7150

7150 (HFA/TDM)ONS-Master

6100 (CMI)ONS-Subscriber

7151 virtual TLN (ACLSTN)ONS-Subscriber

01751234567

EN0000DE00EN_0000© 2005 Siemens AG

9

10

One Number Service (ONS)Siemens

1. System wide AMO’s

ADD-DIMSU:TYPE=BASIC,AUXDIGI=xx

xx=the number of virtual subscribers,used in the case of GSM devices or other external devices in an ONS group.

2. Check the value of FWDMAX in AMO ZAND:ALLDATA2the parallel ringing feature for the ONS subscribers is realised with the FWD feature.

CHANGE-ZAND:TYPE=ALLDATA2,FWDMAX=XX;

3. Add subscriber 7150 (ONS Master)

ADD-SBCSU:STNO=7150,OPT=OPTI,CONN=IP2,DVCFIG=OPTIIP,COS1=33,COS2=30,LCOSV1=9,LCOSV2=1,LCOSD1=5,LCOSD2=1,DPLN=0,ITR=0,SSTNO=NO,COSX=0,SPDI=0,SPDC2=1,REP=0,STD=104,SECR=NO,INS=YES,ALARMNO=0,RCBKB=NO,RCBKNA=NO,CBKBMAX=5,CBKNAMB=YES,TEXTSEL=ENGLISH,IPCODEC=G711PREF;

4. CMI subscriber (6100) is already added

5. Add the virtual subscriber 7151 (ACLSTN)

ADD-SCSU:STNO=7151,DVCFIG=AUXDIGI,DPLN=0,ITR=0,COS1=10,COS2=10,LCOSV1=1, LCOSV2=1,LCOSD1=1,LCOSD2=1,INS=ACLSTN;

6. Assign the subscriber authorizations

Master: CHANGE-SDAT:STNO=7150,TYPE=ATTRIBUT,AATTR=PARARNGM;

Subscriber: CHANGE-SDAT:STNO=6100,TYPE=ATTRIBUT,AATTR=PARARNGS;CHANGE-SDAT:STNO=7151,TYPE=ATTRIBUT,AATTR=PARARNGS;

7. Define the COPIN class 15 for the Master-PIN

CHANGE-PERSI:TYPE=SYS,PIN15LEN=4;

CHANGE-PERSI:TYPE=COPIN,COPIN=15,COTYPE=NONE,PINTEXT="ONS MASTER",DISPRSTN=NO,PINDUR=PERM,IDHOME=NO,PARARNGM=YES;

EN0000DE00EN_0000© 2005 Siemens AG

One Number Service (ONS) Siemens

8. Assign the Master-PIN to the ONS-Master

ADD-PERSI:TYPE=STN,STNO=7150,NAME=”ONS MASTER”,PIN15=7150, PININDIV=YES;

9. Add ONS group 8

ADD-AUN:GRNO=8,TYPE=ONS,STNO=7150&7151&6100;

ADD-AUN:GRNO=8,TYPE=ONS,REMAC=001751234567;

10. Display the ONS group<DIPLAY-AUN:TYPE=ONS;

H500: AMO AUN STARTED

+---------------------------------------------------------------------------+

| GROUP NUMBER: 8 |

| |

| PU SECOND CALL: NO |

| ONS : YES SMPF : YES ONSSNS : NO |

| |

| SUBSCRIBERS: 7150 (MASTER) |

| 7151 |

| 6100 |

| REMAC: 001751234567 |

+---------------------------------------------------------------------------+

EN0000DE00EN_0000© 2005 Siemens AG

11

12

One Number Service (ONS)Siemens

11. Description of the additional control mechanisms

● AMO PERSI: COPIN

DISPRSTN = YES If this is set then the ONS slave number is sent as CLIP.DISPRSTN = NO If this is set then the ONS master number is sent as CLIP.This is effected by the ONSSNS parameter in AMO AUN.

● AMO CTIME: CP2, SMPFTIME (standard 8 sec.)This is the the time the system waits for a return message from an external subscriber (REMACC -call number). If no return message is recieved then after the expiry of the timer only the internal ONS are rung. If a return message is recieved before the expiry of the timer then all the ONS group members are rung.

EN0000DE00EN_0000© 2005 Siemens AG

One Number Service (ONS) Siemens

1.4 Relevant AMOs

AMO Parameter Spra-che

Beschreibung

AUN TYP=ONS d One-Number-Service

TYPE=ONS e One Number Service

TLNNU = 4711(Teilnehmer-Ruf-

nummer)

d Teilnehmerrufnummer: Alle internen ONS-Apparate, auch das virtuelle Gerät (wenn benutzt), sind Teilne-

hmerrufnummern einer Anrufübernahmegruppe.

STNO = 4711(Station number)

e Station number: All internal ONS extensions includ-ing the virtual device (if needed) are station numbers

of a pickup group.

REMKZ d Remote-Knotenkennzahl: Muss benutzt werden um das externe ONS-Gruppenmitglied (GSM-Telefon)

zuzuweisen.

REMAC e Remote access code: Has to be used to assign the external ONS group member (GSM phone).

AUNZWEIT d Anrufübernahme des Zweitanrufs möglich: An-rufübernahme des Zweitanrufs muss benutzt wer-den, wenn alle ONS-Mitglieder analoge Telefone

sind.

PUSECOND e Pick up of second call enabled: Pickup second call has to be used if all ONS members are analog

phones.

SMPF=JA/NEIN d Zuerst Mobiltelefon suchen: Die SMPF-Option ist nur gültig, wenn die Anrufübernahmegruppe die

Rolle einer ONS-Gruppe hat.

SMPF=YES/NO e Search mobile phone first: The SMPF option is only valid if the pickup group is in role of an ONS Group.

ONSSNS=JA/NEIN d ONS-Slave-Nummer unterdrucken

ONSSNS=YES/NO e Suppress ONS Slave Number

SDAT PARARUFM d Master einer Parallelrufgruppe: Muss allen ONS-Master-Apparaten zugewiesen werden.

PARARNGM e Master of a parallel ringing group: Has to be as-signed to all ONS master extensions.

PARARUFT d Teilnehmer einer Parallelrufgruppe: Muss allen ONS-Sekundär-Apparaten zugewiesen werden.

EN0000DE00EN_0000© 2005 Siemens AG

13

14

One Number Service (ONS)Siemens

PARARNGS e Subscriber of a parallel ringing group: Has to be as-signed to all ONS secondary extensions.

PERSI PARARUFM d PIN für Master einer Parallelrufgruppe: Muss der COPIN des ONS-Master-Telefons zugewiesen wer-den, um das permanente Merkmal PIN zu aktivieren.

PARARNGM e PIN for master of a parallel ringing group: Has to be assigned to the COPIN of the ONS master phone in

order to enable the PIN permanent feature.

CTIME SMPFTIME d Wartezeit für Rückmeldung des Mobiltelefons

SMPFTIME e Waiting time for Mobile Phone Response

AMO Parameter Spra-che

Beschreibung

EN0000DE00EN_0000© 2005 Siemens AG