volume 3 design and analysis - willkommen ... ofworking pressure forcylindrical vessel underexternal...
TRANSCRIPT
Proceedings of the
ASME Pressure Vessels
and Piping Conference
-2010-
VOLUME 3
Design and Analysis
presented at
ASME 2010 PRESSURE VESSELS AND PIPING DIVISION/K-PVP CONFERENCE
JULY 18-22, 2010
BELLEVUE, WASHINGTON, USA
sponsored byPRESSURE VESSELS AND PIPING DIVISION, ASME
ASME
Three Park Avenue New York, N.Y. 10016
CONTENTS
DESIGN AND ANALYSIS
BUCKLING AND STRUCTURAL RELIABILITY ANALYSIS
Introduction 1
PVP2010-25092 3
Lower Bound Buckling Load of a Floating Roof Pontoon
Shoichi Yoshida
PVP2010-25173 13
Calculation of Working Pressure for Cylindrical Vessel Under External Pressure
Gurinder Singh Brar, Yogeshwar Hari, and Dennis K. Williams
PVP2010-25467 19
Offshore Pipelines Thermo-Mechanical Performance
Luca Suschitz and Shaju Nair
COMPOSITE MATERIALS AND STRUCTURES
Introduction 29
PVP2010-25146 31
Technological Advances for Improved Performance and Operation of Fiber-Reinforced
Polymer PipingPierre Mertiny, Mohammad Bashar, Avinash Parashar, and Kulvinder Juss
PVP2010-25714 37
Effect of Bondline Thickness on Interfacial Fracture of Laminated Composite Materials
Gefu Ji, Zhenyu Ouyang, Guoqiang Li, H. Dwayne Jerro, and Su-Seng Pang
PVP2010-25755 -45
Effect of Adhesive Thickness on Interfacial Fracture of Bonded Steel Joints
Gefu Ji, Zhenyu Ouyang, Guoqiang Li, Su-Seng Pang, and Samuel Ibekwe
PVP2010-25759 53
A New Idea of Pure Mode-I Fracture Test of Bonded Bi-Materials
Zhenyu Ouyang, Gefu Ji, Guoqiang Li, Su-Seng Pang, and Samuel Ibekwe
PVP2010-25771 61
Nanoclay Based Grid Stiffened Syntactic Foam Composites
Kamissia Stampley, Eyassu Woldesenbet, and Manu John
ix
DESIGN AND ANALYSIS OF BOLTED JOINTS
Introduction 71
PVP2010-25180 73
Effect of External Bending Moment on the Sealing Performance of Pipe Flange Connection
Yoshio Takagi, Hiroyasu Torii, Toshiyuki Sawa, and Yuya Omiya
PVP2010-25622 81
Stress and Deformation Analyses of Flanges Subjected to Bolt Loads and Internal Pressure
Takashi Kobayashi, Kota Hamano, Tsutomu Kikuchi, Toshiyuki Sawa, and
Satoshi Nagata
PVP2010-25766 89
Background on the New ASME PCC-1-2010 Appendices D & 0 "Guidelines for Allowable
Gasket Contact Surface Flatness and Defect Depth" and "Assembly Bolt Load Selection"
Warren Brown
PVP2010-25769 95
Background on the New ASME PCC-1:2010 Appendix A "Training, Qualification and
Certification of Joint Assembly Personnel"
Warren Brown
PVP2010-25772 99
Background on the New ASME PCC-1:2010 Appendix F "Alternatives to Legacy TighteningSequence/Pattern"
Warren Brown, Jerry Waterland, and David Lay
PVP2010-25774 107
Background on the New ASME PCC-1:2010 Appendix M "Washer Usage Guidance and
Purchase Specification for Through-Hardened Washers"
Joseph Barron
PVP2010-25783 111
What's New in the PCC-1-2010 Update "Guidelines for Pressure Boundary Bolted
Joint Assembly"
Clyde Neely and Clay Rodery
PVP2010-25784 117
Background on the New ASME PCC-1:2O10 Appendix P "Guidance on TroubleshootingFlanged Joint Leakage Incidents
James R. Payne, Clyde C. Neely, and Edward W. Hayman
PVP2010-25802 123
High Temperature Design of PVP Bolted Flanged Joints
Warren Brown
PVP2010-25811 129
Vibration-Induced Loosening Performance of Preloaded Threaded Fasteners
Xianjie Yang and Sayed Nassar
x
PVP2010-25813 139
Clamp Load Loss in a Bolted Joint Model With Plastic Bolt Elongation and Eccentric
Service Load
Xianjie Yang, Sayed Nassar, Zhijun Wu, and Aidong Meng
PVP2010-25961 151
Evaluation of Pipe Flange Gaskets Relaxation
Roberto H. G. Araujo and Jose L. C. Lowenberg
PVP2010-25966 157
Spiral Wound Versus Flexible Graphite Faced Serrated Metal Pipe Flange Gaskets in
Thermal Cycling and Pressure Comparative TestingJose C. Veiga, Carlos F. Cipolatti, and David Reeves
PVP2010-25995 167
Structure and Strength Analysis on End Closure Seal Using D-Section Shearing Bolts and
"n"-Ring for Pressure Vessels
Ping Chen and Yuting Deng
PVP2010-26035 175
Using Computational Fluid Dynamics and Finite Element Analysis to Determine Bolt
Stresses Due to Thermal Cyclic LoadingPhil Martinez, Sean M. McGuffie, and Michael A. Porter
DESIGN AND ANALYSIS OF PIPING AND PIPING COMPONENTS
Introduction 181
PVP2010-25055 183
Stress Predictions at Elbow Ends Under Internal Pressure and System Moments
Jinhua Shi, Granson Lee, David Blythe, John Buckland, Yuebao Lei, and
Timothy Soanes
PVP2010-25109 191
The Design of a Self-Monitoring Thermoplastic Composite Pipe for High Pressure
Gas/Liquid TransportMelvin F. Kanninen, Randall B. Stonesifer, and Kyle Bethel
PVP2010-25147 197
Load Limiting Gapped Strut and New Generation Whip Restraint
John H. Gray, Vijay K. Verma, and Maury A. Pressburger
PVP2010-25166 207
Analysis Methodology Used in the Qualification of Westinghouse AP1000 Instrumentation
Grid AssemblyLixin Yu, Jianfeng Yang, John F. Kielb, Scott M. Hunter, Gerrie W. Delport, Jun C. Bae, and
Jeffrey D. Eisenhaure
PVP2010-25178 213
ASME Code Qualification of Pipe Bends With Localized Wall ThinningUsama Abdelsalam and Dk Vijay
xi
PVP2010-25213 221
Relation B/W Stress, Nozzle Load and Total Length in a Process Piping Line
Javad Ozmaian and Amir H. Farzaneh
PVP2010-25223 233
Determination of Gimbal and Hinged Expansion Joints Reaction Moments
Jose Carlos Veiga, Jorivaldo Medeiros, Nelson Kavanagh, Jordana Veiga, and
Ana Maria F. Sousa
PVP2010-25743 243Consideration of Hydraulic Loads in the Load and Resistance Factor Design (LRFD) of
Class 2 and 3 Nuclear PipesKleio Avrithi
PVP2010-25853 249Assessment of a Piping System Subjected to Thermal Stratification and Thermal Striping
Somnath Chattopadhyay
PVP2010-25884 255
Investigation of Flexibility Factors and Stress Indices for Class 1 Curved PipingNima Zobeiry, AH Asadkarami, and WolfReinhardt
PVP2010-25921 263
Effect of Radial Offset Between Welded Back to Back Elbows on Their C2 Stress Index
R. Balakrishnan and W. Reinhardt
PVP2010-25954 273
Determining the Maximum Allowable Working Pressure of NPT Threaded Joints
Warren Brown
PVP2010-26090 279
Comparison of Elastic-Plastic Analysis and Experimental Result for Locally Thinned PipeWolf Reinhardt and Xinjian Duan
PVP2010-26092 2872010 Edition of B31.3 Process Piping Code: A First Equation for Stress Due to
Sustained Loads
Don R. Edwards
DESIGN AND ANALYSIS OF PRESSURE VESSELS,HEAT EXCHANGERS AND COMPONENTSIntroduction 295
PVP2010-25005 297Effect of Creep on the Residual Stresses in Tube-to-Tubesheet Joints
Nor-Eddine Laghzale and Abdel-Hakim Bouzid
PVP2010-25052 307
Design and Analysis of LPG Storage Bullets Supported on Multiple SaddlesRadoslav Stefanovic and Yaser Noman
xii
PVP2010-25104 317
Nozzle Blend Radius Peak Stress Correction Factors for 2-D Axisymmetric Finite
Element Models
Matthew C. Walter and Daniel V. Sommerville
PVP2010-25221 327
Stability of Elastic Orthotropic Circular Cylindrical Vessels
Krzysztof Magnucki and Leszek Wittenbeck
PVP2010-25307 335
A Comparative Study on Elastic Behavior of Trefoil Patterned Perforated Plate
Min-Ki Cho, Chang-Hoon Ha, Moo-Yong Kim, Sang-Cheol Lee, Jea-Mean Koo, and
Chang-Sung Seok
PVP2010-25382 343
Local Structure Response of High-Rise Empty Cylindrical Shell Towers to Wind-Induced
Resonance Vibration
Jianhua Pan, Xuedong Chen, Zhibin Al, and Huifeng Jiang
PVP2010-25450 349
Oyster Creek Nuclear Generating Station Containment Drywell Buckling AnalysisSoo Bee Kok, John F. O'Rourke, Shu S. Tang, Francis H. Ku, Marcos L. Herrera, and
Francis H. Flay
PVP2010-25593 355
Analysis of Power Boiler Furnace Wall and its Supporting Structure
Jaecheol Kim and Taewoan Kim
PVP2010-25608 361
Numerical Analysis on Convection Heat Transfer of Pulsating Flow in a Corrugated Tube
Jiuyang Yu, Wei Wang, Xia Yang, Jianmin Xu, Lin Wei, Jie Zhang, Jiuyang Gao, and
Xin Wang
PVP2010-25765 367
Coke Drum Design and Fabrication Issues
Cathleen Shargay, Anil Singh, Tim Munsterman, and Les Antalffy
PVP2010-25833,.
383
Diaphragm Closure Analysis Using Nonlinear FEA and CFD
Sean McGuffie, Mike Porter, and Dennis Martens
PVP2010-25856 395
Design Methodology for the Support Beams of Internal Beds in Vertical Vessel
Devki Nandan Garg
PVP2010-25858 401
Stress Analysis and Qualification of Vessels Containing Large Internal Vessels and Piping:
MethodologyAjay Prakash, Wade Wilcox, John Minichiello, and John Julyk
xiii
PVP2010-25859 409
Stress Analysis and Qualification of Vessels Containing Sizeable Internal Vessels and Piping:
ApplicationsAmir Hamaoui, Gregory Sviatoslavsky, Bryan Dunlap, and Ajay Prakash
PVP2010-26127 415
Considerations in Using FEAfor Layered Vessel Construction
Trevor G. Seipp, Mark Stonehouse, and Charles Ormsbee
PVP2010-26128 423
A Novel Comparison of Design-by-Analysis MethodsMark Stonehouse, Trevor G. Seipp, Shinichiro Kanamaru, and Shawn Morrison
PVP2010-26129 429
User's Design Specification Recommendations for ASME Section VIII, Division 2
Trevor G. Seipp and Shiju V. P. George
ELEVATED TEMPERATURE DESIGN
Introduction 437
PVP2010-25018 439
Primary Creep Modeling Based on the Dependence of the Activation Energy on
the Internal Stress
Luca Esposito and Nicola Bonora
PVP2010-25041 445
Modeling the Tertiary Creep Damage Behavior of a Transversely-lsotropic Material Under
Multiaxial and Periodic Loading Conditions
Calvin M. Stewart and AH P. Gordon
PVP2010-25091 457
Design Limits for Buckling in the Creep RangeMaan Jawad and Donald Griffin
PVP2010-25096 469
Non-Linear Creep-Buckling Analysis: An Approach Based on WRC-443 for Development of
Allowable Compressive Stresses in Coke Drums
M, Sohel M. Panwala and S. L. Mehta
PVP2010-26014 475
Creep Strength Evaluation of Welded Joint Made of Modified 9Cr-1Mo Steel for JapaneseSodium Cooled Fast Reactor (JSFR)
Takashi Wakai, Yuji Nagae, Takashi Onizawa, Satoshi Obara, Yang Xu, Tomomi Ohtani,
Shingo Date, and Tai Asayama
PVP2010-26096 485
Comparison of Notched Bar Creep Behavior of Various AlloysYukio Takahashi
xiv
FATIGUE, FRACTURE, AND DAMAGE ANALYSIS
Introduction 493
PVP2010-25011 495
Assessment Techniques Using the R6 Procedure: Investigation of Limit Load Approach for
Pipe Branch Connections
Peter A. Frost
PVP2010-25129 509
Shakedown Behavior of a Two-Layer Beam Considering Ductile Damage Under
Thermo-Mechanical LoadingsXiao-Tao Zheng and Fu-Zhen Xuan
PVP2010-25171 519
Stress Intensity Factors and Weight Functions for Longitudinal Semi-Elliptical Surface
Cracks Inside Thick-Walled Cylinders Using Highly-Refined Finite-Element Models
Adam R. Hinkle, James E. Holliday, and David P. Jones
PVP2010-25225 557
A Modified Weld Structure of Layered Urea Reactor Based on Stress Analysis and
Leak Detection
Shugen Xu, Weiqiang Wang, Mengli Li, and Mingda Song
PVP2010-25233 563
A New Approach to Elastodynamic Response of Cylindrical Shell Based on Generalized
Solution Structure Theorem for Wave EquationShugen Xu, Weiqiang Wang, and Yan Liu
PVP2010-25323 573
Analysis of Fracture Specimen Failure of Inconel 600: Elastic-Plastic Calculations and
Thermo-Plastic Energy Fracture Parameter
Frederique RossiIIon and Yves Meziere
PVP2010-25359 581
Flow Stress in a Notched Austenitic Stainless Steel Specimen Under Combined
Tension and BendingSatoru Izawa and Masaaki Matsubara
PVP2010-25386 589
An Experimental and Numerical Methodology to Investigate Crack Growth in a 304L
Austenitic Stainless Steel Pipe Under Thermal FatiguePauline Bouin, Antoine Fissolo, and Cedric Gourdin
PVP2010-25404-595
Environmental Fatigue Evaluation for Primary Components of APR1400 Reactor
Coolant SystemJ. M. Kim, K. W. Kim, K. S.Yoon, S. H. Park, I. Y. Kim, and Y. H. Kim
PVP2010-25408 605
Parametric Study of Interaction Between Multiple Nonaligned Part-Through-Wall Cracks
Shinji Konosu, Kyosuke Kasahara, Kenji Ito, and Shinichiro Kanamaru
xv
PVP2010-25470 625
Analytical Method for the Calculation of J Parameter in Cracked Components:Presentation of the RSE-M/RCC-MR Procedure and Benchmark Proposal
S. Marie, B. Drubay, P. Le Delliou, S. Chapuliot, H. Deschanels, B. Barthelet, andJ. Schwab
PVP2010-25492 637
Investigation on the Failures Experienced in Deaerators and Solution RecommendationAun Ming Lim and Simon Yuen
PVP2010-25507 643Internal Crack Initiation in Low-Cycle Fatigue of Stainless Steel
Masayuki Kamaya and Masahiro Kawakubo
PVP2010-25520 651
Variation in Mechanical Properties, Microstructures and Fracture Behavior of 304Stainless Steel During Low-Cycle Fatigue
Duyi Ye, Yuandong Xu, Xiao Lei, and Haibo Cha
PVP2010-25607 663Stress Concentration and Stress Intensity for Pressurized Eroded Autofrettaged Thick
Cylinders With Bauschinger Effect
Q. Ma, C. Levy, and M. Perl
PVP2010-25668 671
Presentation of a Toughness Benchmark on a Low Ductility Material:6061-T6 Aluminium
O. Ancelet, S. Marie, L. Allais, P. Wident, L. Briangon, D. Guilbaud, D. Bonne, and
A, F. Bonnot
PVP2010-25686. 677Probabilistic Approach for Fatigue Life Assessment Based on S-N Curve
Zhigang Wei, Robert E. Kurth, and Thomas P. Forte
PVP2010-25711 687Coupled Creep Fatigue Analysis on 2Va Cr-1Mo-V Pressure ComponentsPer Code Case 2605
Mingxin Zhao
PVP2010-25760 693Numerical Investigations of Phenomena Caused by the Closure and Growth Behavior ofShort Cracks Under Thermal Cyclic Loading
Jurgen Rudolph, Kai Bauerbach, and Michael Vormwald
PVP2010-25796..... 701Estimation Procedures for J and CTOD Fracture Parameters Experimental Evaluation UsingHomogeneous and Mismatched Pin-Loaded SE(T) Specimens
Gabriel P. de Oliveira and Gustavo H. B. Donato
xvi
PVP2010-25804 711
Estimation Procedures for J and CTOD Fracture Parameters Experimental Evaluation Using
Homogeneous and Mismatched Clamped SE(T) Specimens
Felipe C. Moreira and Gustavo H. B. Donato
PVP2010-25891 721
Method for Selecting Stress States for Use in an NB-3200 Fatigue Analysis
Thomas L Meikle V, E. Lyles Cranford III, and Mark A. Gray
PVP2010-25935 729
AREVA Fatigue Concept: A New Method for Fast Fatigue Evaluation
Benedikt Heinz
PVP2010-25942 735
Advanced Probabilistic Fracture Mechanics Using the R6 Procedure
David W. Beardsmore, Karen Stone, and Huaguo Teng
PVP2010-25952 743
Bending Test on an Aged Cast Duplex Stainless Steel Pipe Containing a Crack in the
Heat Affected Zone: Results and AnalysisPatrick Le Delliou, Frangois Curtit, Christophe Sonnefraud, and Claude Pages
PVP2010-26058 753
Some Useful Tests for the Finite Element Meshes of Polycrystals With Explicit Account of
the Grains and Grain Boundaries
Igor Simonovski and Leon Cizelj
FITNESS FOR SERVICE EVALUATIONS
Introduction 761
PVP2010-25271 763
Application of the ASME Code SEC III Pressure Design Requirements on Locally Thinned
Tight Radius Pipe Bends
Usama Abdelsalam
PVP2010-25335 771
The Effects of Classification of Misalignment-Induced Stresses in Engineering Critical
Assessments of Welded Joints With Some MisalignmentLiwu Wei
PVP2010-25406 783
Multiple Fatigue Crack Growth Prediction Using Standard Stress Intensity Factor Solutions
Shinji Konosu and Kyosuke Kasahara
PVP2010-25423 793
Integrity Assessment of Pressure Vessels Subjected to Hydrogen Induced Damages
Abdul Wahab Al-Mithin, Vinayak Sardesai, Ghassab Al-Ajmi, and
Abdul Sattar A. Hannan
xvii
PVP2010-25543 799
Research on Safety Assessment Method for Pressure Pipe With Incomplete WeldingDefects Under Complicated Loadings
Zhijiang Jin, Xianping Wan, and Chenghang Jiang
PVP2010-25795 807
A Case Study on the Effect of Peaked Pipe Welds on Piping Life Expectancy
Warren Brown, Martin Prager, and Sarah Wrobel
PVP2010-25829 —•813
Design and Inspection Considerations for Cyclic EquipmentJ. Ryan Jones
INELASTIC, NONLINEAR ANALYSIS, AND LIMIT LOAD ANALYSIS
Introduction 825
PVP2010-25132 827
Study on Collapse Characteristics and CSRF Method for Cylinder-to-Cylinder Intersections
by Plastic Analysis
Shunji Kataoka, Asako Miyakawa, and Takuya Sato
PVP2010-25397 837
Limit Load of Pre-Cracked Polyethylene Miter Pipe Bends Subjected to In-Plane
Bending Moment
Tarek M. A. A. EL-Bagory, Maher Y. A. Younan, Hossam E. M. Sallam, and
Lotfi A. Abdel-Latif
PVP2010-25491 847
Effect of Load Angle on Limit Load of Polyethylene Miter Pipe Bends
Tarek M. A. A. EL-Bagory, Maher Y. A. Younan, Hossam E. M. Sallam, and
Lotfi A. Abdel-Latif
PVP2010-25632 857
Use of API 579-1/ASME FFS-1 Limit-Load Criteria for Establishing Load Limits for
Pressure Vessel Internals
Brian R. Macejko
PVP2010-25669 869
Elastic-Plastic Shakedown Evaluation Using ASME Code Section III and
Section VIII Methods
David P. Molitoris, John V. Gregg, Jr., Edward E. Heald, David H. Roarty, and
Benjamin E. Heald
PVP2010-25716 881
Comparison of Analytical Methods to Study the Impact of a Postulated Closure Head DropAccident on the Structural Integrity of the Bottom-Mounted Instrumentation System
William C. Castillo, Geoffrey M. Loy, Joseph Remic, 111, David P. Molitoris,
George Demetri, and David H. Roarty
xviii
PVP2010-25762 889
Effect of Shear and Torsion on the Plastic Collapse Load of a Pipe Section With a
Circumferential Flaw
Lingyah Yen, Taha Al-Shawaf, and Dae-Jin Kim
PVP2010-25967 897
Numerical and Experimental Stress Analysis of a High Pressure Compressor UsingFinite Element Analysis Based on Design by Analysis Criteria
Raul Bosco, Jr.
PIPE DAMAGES DUE TO EXPLOSIONS OR WATER HAMMER
AND EXPLOSIONS
Introduction 905
PVP2010-25261 ... 907
Hydrogen Ignition Mechanism for Explosions in Nuclear Facility Pipe SystemsRobert A. Leishear
PVP2010-25695 913
Design Rules for Pipe Systems Subject to Internal Explosions: Part 1
Jan P. M. Smeulers and Gersom Pape
PVP2010-26131 923
Water Hammer and Column Separation Due to Accidental Simultaneous Closure of
Control Valves in a Large Scale Two-Phase Flow Experimental Test RigAnton Bergant, Jos M. C. van't Westende, Hit Koppel, Janez Gale, Qingzhi Hou,
Zoltan Pandula, and Arris S. Tijsseling
PVP2010-26177 933
Design Rules for Pipe Systems Subject to Internal Explosions: Part 2
Jan P. M. Smeulers and Gersom Pape
PIPING AND EQUIPMENT DYNAMICS, DYNAMIC RESPONSE ANALYSIS
Introduction 943
PVP2010-25266 945
Higher Mode Frequency Effects on Resonance in Machinery Structures
Robert A. Leishear
PVP2010-25478 957
Maximum Shearing Stress of a Structure Subjected to Random Excitations
Byounghoan Choi and Jianfeng Yang
PVP2010-25824 961
Investigation of Vane-Pass Frequency Vibration in a Centrifugal PumpMike Porter and Mike Fischbach
xix
STRUCTURAL INTEGRITY OF WELDED COMPONENTS
Introduction 967
PVP2010-25744 969
Optimizing Temper Bead Welding by CWM and DOE
Mahyar Asadi and John Goldak
PVP2010-25770 979
Challenges in Verification of CWM Software to Compute Residual Stress and
Distortion in Welds
John Goldak and Mahyar Asadi
PVP2010-25981 - - 989
Welding Induced Distortions and Strains of a Built-Up Panel:
Experiment and Numerical Validation
Christopher Bayley and John Goldak
THERMAL STRESSES IN VESSELS, PIPING AND COMPONENTS
Introduction 997
PVP2010-25422 999
The Influence of Switch Temperature on Coke Drum Fatigue Life
Fabio de Castro Marangone, Ediberto Bastos Tinoco, and Carlos Eduardo Simdes Gomes
PVP2010-25595 1007
Development of High Cycle Thermal Fatigue Evaluation Method Based on Time Interval of
Peak-to-Peak of Fluid Temperature
Nobuyuki Kimura, Jun Kobayashi, and Hideki Kamide
PVP2010-25638 1017
Application of CFD to Solve Difficult Industry Thermal Stress Problems
David J. Dewees
PVP2010-25888 1031
A Stochastic Approach of Thermal Fatigue Crack Growth (LEFM) in Mixing Tees
Vasile Radu and Elena Paffumi
PVP2010-26045 1041
The Effects of Severe Thermal and Pressure Transients on the Survival of
Internally Coated TubesJ. T. Harris, A. E. Segall, and R. Carter
Author Index 1049
xx