vmas remote training module 0
TRANSCRIPT
-
8/12/2019 VMAS Remote Training Module 0
1/14
V1.0 Preparing for Remote Product Support Workshop Delivery
Microsoft
Microsoft Confidential - For Internal Partner Support Distribution
1
Preparing for Remote Product
Support Workshop Delivery
Module 0
-
8/12/2019 VMAS Remote Training Module 0
2/14
-
8/12/2019 VMAS Remote Training Module 0
3/14
V1.0 Preparing for Remote Product Support Workshop Delivery
Microsoft
Microsoft Confidential - For Internal Partner Support Distribution
3
Preparing for remote Workshop DeliveryThis module explains how to configure your personal workstation to successfully connect and utilize
the Microsoft Remote Product Support Workshops.
It is recommended that your personal workstation be configured with multiple monitors (3 is ideal,
2 is recommended). This course leverages multiple technologies, including Microsoft Lync Server
2010, Microsoft Virtual Machine Acquisition System (VMAS), and various Microsoft Office
products, to deliver a learning environment equal to that of a typical classroom Instructor Led
Training (ILT) experience. Multiple monitors will enable faster switching between services, thus
improving the remote delivery experience.
Before You Begin
Before starting this module, you should:
Ensure that your personal workstation has the latest critical updates installed. Verify your personal workstation is configured to use an updated Antivirus / Antimalware software
package.
Ensure Microsoft Office 2010 Professional or later has been installed.
Ensure your training workstation is equipped with speakers and a microphone (or a headset), andthat they are functioning normally.
Note:The steps below are written for a student using a Windows 7 workstation with Internet
Explorer 9 installed. Particular steps may vary if you are using an older version of either Windows
or Internet Explorer.
Note:Browsers other than Internet Explorer are outside the scope of this document.
Component Description
Processor Pentium IV or equivalent computer with process speed greater than or equal to 2.3 GHz.
Memory Minimumof 2 GB RAM
VGA Monitor Multiple Monitors Displaying over 1024x768 resolution
Operating System Windows Vista or later Operating system.
Web Browser Internet Explorer 9 preferred with the most recent Silverlight version installed. Firefox &
Chrome can be used, but require the IE add-in. Safari is not supported.
Internet Speed 5 Mb/s download and 0.5 Mb/s upload
Productivity Software Office 2010 Professional
-
8/12/2019 VMAS Remote Training Module 0
4/14
Module 0 V1.0
2012 Microsoft Corporation. All rights reserved.
4 Microsoft Confidential - For Internal Partner Support Distribution
Lesson 1: Using the Virtual Machine Acquisition System
Training Module: Access 24 Hours prior to Training
This lesson introduces the Virtual Machine Acquisition System (VMAS) Training module, and provides
the student some familiarity with the environment.
What You Will Learn
After completing this lesson, you will be able to:
Access the Virtual Machine Acquisition System (VMAS) training module. Locate and open the training documents associated with your course. Locate and access the virtual machines associated with your course.
Connecting to the Virtual Machine Acquisition System (VMAS)
training module for the 1sttime:
The Virtual Machine Acquisition System (VMAS) training module is a SilverLight-based Internet
portal used for hosting remote Product Support Workshop deliveries. This provides the
foundational environment used by a student to access basic course information, the student and
instructor lists, agenda, the virtual machines associated with the course, and the learning
materials.
Each student is provided their own copy of the resources needed for successfully learning the
course material; virtual machines are unique to each student, not shared. Students are also
encouraged to copy the course material from the VMAS environment for immediate use as well as
offline consumption.
Note: Per the End User License Agreement (EULA) in the Product Support Workshop documentation,
students may redeliver the information contained in this course to other members of their support
organization only. They may not re-use or redeliver this material to any audience outside that
organization for any reason.
-
8/12/2019 VMAS Remote Training Module 0
5/14
V1.0 Preparing for Remote Product Support Workshop Delivery
Microsoft
Microsoft Confidential - For Internal Partner Support Distribution
5
Configuring Your Workstation to Consume Remote Product Support
Workstation Training
Configuring Your Workstation
Proper functioning of the Virtual Machine Acquisition System (VMAS) Training Module lab environment
requires several additional settings.
1. Add the website to your trusted sites list:o Open Internet Explorero Navigate to:https://anytimetraining.msftonlinerepro.com/vmastraining/o When prompted for credentials, enter your msftonlinerepro account provided to you for
use in this class, and your password sent at the same time
o Click the Tools icon in the upper right corner.o Click Internet Optionso Navigate to the Security tab. Click the "Trusted Sites" icon, then click the "Sites" buttono If the site appears in the "Add this website to the zone" text box, uncheck "Require server
verification (https: ) for all sites in this zone", and click Add.
o If the site is not in the text box, perform the same step as above after typing in the addresshttps://anytimetraining.msftonlinerepro.com/vmastraining/.
2. Configure popups to appear in a new tab.o The VMAS system uses SilverLight technology and popups for each virtual machine
window. As a student, you will want to be able to quickly navigate between several
open machines to complete your labs. Thus, for the duration of this course you will
want popups to appear in new tabs.
To configure this:
Within Internet Explorer, click the Tools icon in the upper right handcorner of the Internet Explorer window
On the General tab, find the "Tabs" section, and click Settings. Under "When a pop-up is encountered:", select Always open pop-ups ina new tab.
https://anytimetraining.msftonlinerepro.com/vmastraining/https://anytimetraining.msftonlinerepro.com/vmastraining/https://anytimetraining.msftonlinerepro.com/vmastraining/https://anytimetraining.msftonlinerepro.com/vmastraining/https://anytimetraining.msftonlinerepro.com/vmastraining/https://anytimetraining.msftonlinerepro.com/vmastraining/https://anytimetraining.msftonlinerepro.com/vmastraining/https://anytimetraining.msftonlinerepro.com/vmastraining/https://anytimetraining.msftonlinerepro.com/vmastraining/ -
8/12/2019 VMAS Remote Training Module 0
6/14
Module 0 V1.0
2012 Microsoft Corporation. All rights reserved.
6 Microsoft Confidential - For Internal Partner Support Distribution
3. Save your credentials for re-use: Credentials will be come by email under separate cover onebusiness day prior to training.
oBy default, each time you attempt to connect to thehttps://anytimetraining.msftonlinerepro.com/vmastraining/site, you will be prompted for
credentials. In addition, each connection to a virtual machine using a Remote Desktop
Connection will authenticate against Microsoft's Remote Desktop Gateway server. As a result,
each student will want to save your credentials for reuse whenever possible and keep them
handy.
o When you are prompted to enter your msftonlinerepro domain credentials, enterthe user name and password provided to youprior to joining this class, then click the
"Remember my credentials" check box.
4. Verify you have already installed .Net Framework versions 3.5 and 4.0. Code from bothversions of the Framework is utilized.
o To install: .Net Framework 3.5:
http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=21
.Net Framework 4.0:http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=17851
Follow the instructions provided for installation of one or both versions of the framework,as appropriate.
Accessing the VMAS Training Module
As mentioned previously, the VMAS Training module is a SilverLight based web portal. Each student
is provided an account in the MsftOnlineRepro domain, for use during their course.
To connect to the environment, follow these steps:
oOpen an Internet Explorer browser, and navigate tohttps://anytimetraining.msftonlinerepro.com/vmastraining/
1. Silverlight will load (you may be prompted to install the SilverLight add on if you have not already).2. You will be prompted to provide a user name and password. Enter your account provided to you
for this training: it will be an account in the Msftonlinerepro domain, e.g.
"MsftOnlineRepro\".
3. Once you have been authenticated, you will see an environment similar to the following:
https://anytimetraining.msftonlinerepro.com/vmastraining/https://anytimetraining.msftonlinerepro.com/vmastraining/https://anytimetraining.msftonlinerepro.com/vmastraining/http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=21http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=21http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=17851http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=17851https://anytimetraining.msftonlinerepro.com/vmastraining/https://anytimetraining.msftonlinerepro.com/vmastraining/https://anytimetraining.msftonlinerepro.com/vmastraining/https://anytimetraining.msftonlinerepro.com/vmastraining/http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=17851http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=17851http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=21http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=21https://anytimetraining.msftonlinerepro.com/vmastraining/https://anytimetraining.msftonlinerepro.com/vmastraining/ -
8/12/2019 VMAS Remote Training Module 0
7/14
V1.0 Preparing for Remote Product Support Workshop Delivery
Microsoft
Microsoft Confidential - For Internal Partner Support Distribution
7
Using the Environment
The environment is divided into a number of zones. The "Course Information" page contains the
following:
Course Information: This is a basic description of the course that the student is enrolled in.This section also contains links to the course Agenda, and the LiveMeeting/Lync URL,
which is used to receive information from the course instructor.
Instructor(s): This section contains information on the instructor for the course, includinga pic and brief biography.
Attendees: Displays a list of the students that have registered in the course. Course Materials: Provides links to the written materials associated with the course.
These may include written Module content, PowerPoint presentations, and Lab Manuals.
Lab Virtual Machines: This section provides links to the virtual machines associated withthe course.
Opening Course Documentation
Each Module of content will have a PowerPoint presentation and written Module (Word document)
associated with it. In addition, there may be one or more Lab module documents associated with
the Module (not all Modules will have labs).
-
8/12/2019 VMAS Remote Training Module 0
8/14
Module 0 V1.0
2012 Microsoft Corporation. All rights reserved.
8 Microsoft Confidential - For Internal Partner Support Distribution
In order to open any of the documents, simply click on the document icon. This will
launch a prompt to open the document. Click on the icon again, and the document will
be opened on your local workstation.
Accessing Virtual Machines
The VMAS Training module also serves as a portal to connect to the virtual machines associated with
your course. When it is time to access the lab machines, follow these steps:
In the Lab Virtual Machines section of the VMAS Training module, locate the name of thevirtual machine needed to complete the lab exercise.
Each virtual machine button will have a small icon on the right side. This icon is used tolaunch a Remote Desktop session on the virtual machine in question.
Launching a Remote Desktop session on any virtual machine will cause a new tab to beopened that will look like the following:
The window to the right provides access to the desktop on the virtual machine selected.Enter the password provided to you by the lab documentation (or instructor) to log on to
the virtual machine.
If you need to access virtual machines, click the Remote Desktop icon on the appropriatevirtual machine name in the left window. This will cause a new Internet Explorer tab to
be opened similar to this one, with a remote desktop connection to that server.
-
8/12/2019 VMAS Remote Training Module 0
9/14
V1.0 Preparing for Remote Product Support Workshop Delivery
Microsoft
Microsoft Confidential - For Internal Partner Support Distribution
9
Note: For this to work correctly, please ensure you have selected "Always open popups in a new tab"
as indicated in step 2 of "Configuring your personal workstation" above.
Lesson 2: Using the Lync Client
Voice and live presentation material will be delivered to the student using Microsoft Lync 2010.
Lync enables a combination of voice, data, and video to be shared to attendees in a conference call
format. This will also enable the students to ask questions of the presenter (or each other), helping
to facilitate the learning environment
What You Will Learn
After completing this lesson, you will be able to:
Understand the choices available to consume the Lync Server conference Determine how best to connect to the live discussion. If appropriate, download and install the Lync client software
Connecting to Lync
Each student will receive an email containing a URL to use when connecting to the Lync conference.
This URL will resemble the following:https://join.microsoft.com/meet/JoeUser/NFRL274Z
When the student clicks this link, one of several things may happen:
1. If the student already has the Lync Client installed, this will connect the user to the Lyncconference, with no additional steps necessary.
2. If the student does not have the Lync Client installed locally, the student will be prompted witha choice of what to do next:
https://join.microsoft.com/meet/JoeUser/NFRL274Zhttps://join.microsoft.com/meet/JoeUser/NFRL274Zhttps://join.microsoft.com/meet/JoeUser/NFRL274Zhttps://join.microsoft.com/meet/JoeUser/NFRL274Zhttps://join.microsoft.com/meet/JoeUser/NFRL274Z -
8/12/2019 VMAS Remote Training Module 0
10/14
Module 0 V1.0
2012 Microsoft Corporation. All rights reserved.
10 Microsoft Confidential - For Internal Partner Support Distribution
3. It is recommended, the student install the Lync Attendee. Choose Download and install LyncAttendee. This will give the maximum communication experience, the ability to chat outside
the meeting with the instructor, and the ability for the instructor to share your machine.
http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=15755
The student should verify the Quick Details provided are appropriate for her machine, then click
the Download button.
4. Click the "Run" option on the Download Details page. Please note that this is a 50 MB download,so allow some time to complete.
5. Click to run the SetupAttendee.exe, and follow the instructions as appropriate for your machine.6. Once the Lync Attendee has finished Setup, the student will need to re-attempt to enter the
meeting (re-enter the URL provided).
7. Depending on the student's security settings, you may be prompted to allow a website to opencontent on your computer. Press Allow.
http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=15755http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=15755http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=15755http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=15755 -
8/12/2019 VMAS Remote Training Module 0
11/14
V1.0 Preparing for Remote Product Support Workshop Delivery
Microsoft
Microsoft Confidential - For Internal Partner Support Distribution
11
8. The Lync 2010 Attendee will then launch. Select "Join as a Guest". Enter your name in the"Display Name", and click Join.
9. You will be admitted into the Meeting Lobby, and will be admitted by the meeting owner.10. If you would like to connect using your web browser, simply click the 1stlink. This will launch a
Silverlight web application, and the student will be presented with the following dialog.
Note Lync Web App is not supported on 64-bit browsers, and some of the features described below
will not work unless you are using a 32-bit web browser.
-
8/12/2019 VMAS Remote Training Module 0
12/14
Module 0 V1.0
2012 Microsoft Corporation. All rights reserved.
12 Microsoft Confidential - For Internal Partner Support Distribution
In this case, the student will need to join as a guest. Please note that using the web browser
connection may not provide as high fidelity an experience as with a more full featured Lync client.
Get audio
To get audio during the meeting, do the following:
1. In the meeting window, click Phoneto see your audio options.2. Do one of the following:
The conference calls you.To have the conference call your phone, choose your country code, typeyour phone number, and then click the Call Mebutton.
Join using Communicator.To use Microsoft Office Communicator 2007 R2 for the audio featuresof the conference, click the Callbutton.
NoteThis option is available only if you are running Office Communicator 2007 R2, and you joined the
meeting with your corporate credentials. It will launch a separate call window using Office Communicator.
Dial in to the conference.To manually dial into the meeting from your phone, call the dial-innumber in your email invitation and enter the Conference ID.
-
8/12/2019 VMAS Remote Training Module 0
13/14
V1.0 Preparing for Remote Product Support Workshop Delivery
Microsoft
Microsoft Confidential - For Internal Partner Support Distribution
13
View information about the other participantsThe participant list indicates the permissions level of each participant: either Presenter or Attendee. Only
presenters can share their screens, give Microsoft PowerPoint presentations, open whiteboards, and
access other features, depending on how the meeting was organized.
The icons next to each name indicate whether the person is currently participating in instant messaging (IM),
audio, video, and content sharing in the meeting.
Save a file that another participant has distributedTo save a file that someone shares during a meeting, do the following:
1. At the top of the meeting window, click the Add or view attachmentsbutton.
2. Click the file, select a location, and then click Save.
-
8/12/2019 VMAS Remote Training Module 0
14/14
Module 0 V1.0
2012 Microsoft Corporation. All rights reserved.
14 Microsoft Confidential - For Internal Partner Support Distribution
Common issues / Troubleshooting:
1) If you believe youre having proxy issuesyou may want to test one of the following public proxies fromhttp://www.publicproxyservers.com/proxy/list1.html
2) Running Vistayou may need to apply the following updates:a. KB KB969084x64andx86.Specifically, you will need these updates if you receive "Class Not
Registered" .Net Framework exception errors when trying to launch an RDP session to your lab
environment.
b. Ensure you have the latest SP and any RDP related fixes.3) If you receive "Access is Denied" .Net Framework errors when launching an RDP session, please verify that
https://anytimetraining.msftonlinerepro.comis in your Trusted Sites settings in your Internet Browser. If this is
the case and you are still receiving errors, try resetting your Trusted Sites settings to defaults or verify yoursettings are not preventing ActiveX controls from launching while in a trusted site.
4) If your browser session seems to hang when connecting to an RDP session(i.e. you see a blank white screen),please close all browser windows, then reconnect to the site. When prompted for credentials on the initial
Threat Management Gateway page, please verify you have checked "Logging on from a Private Computer", and
re-enter your credentials.
5) If you are able to logon via the Treat Management Gateway credentials page, but are prompted forcredentials by "RD Gateway Server" when launching an RDP session, please verify you are not pasting your
credential information into the Gateway page. Also be sure youre not using caps when typing the credentials.
6) If youreunable to login to the RD Gateway and continually getting prompted for credentialstry the following:delete cookies, close all IE sessions, and re-try the logon. https://anytimetraining. writes a cookie with some RD
Gateway information, so it could need an updated cookie.
7) For connectivity/networking issues try accessing from another network, if possible.8) For Lync sharing to be viewable from the instructors machine, confirm with your IT department that ports 443,
5061, and 8057 are open (Refer toLync Server 2010 Protocol Workloads)
9) The Microsoft support team will gladly assist with connectivity issues relating to student user credentials. Oncecredentials have been verified, students must see their internal network administrators for assistance.
http://www.publicproxyservers.com/proxy/list1.htmlhttp://www.publicproxyservers.com/proxy/list1.htmlhttp://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=20414http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=20414http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=20414http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=12767http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=12767http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=12767https://anytimetraining.msftonlinerepro.com/https://anytimetraining.msftonlinerepro.com/http://www.microsoft.com/en-us/download/details.aspx?id=6797http://www.microsoft.com/en-us/download/details.aspx?id=6797http://www.microsoft.com/en-us/download/details.aspx?id=6797http://www.microsoft.com/en-us/download/details.aspx?id=6797http://www.microsoft.com/en-us/download/details.aspx?id=6797https://anytimetraining.msftonlinerepro.com/https://anytimetraining.msftonlinerepro.com/http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=12767http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=12767http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=20414http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=20414http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=20414http://www.publicproxyservers.com/proxy/list1.htmlhttp://www.publicproxyservers.com/proxy/list1.html