VISITOR COUNTER

PRESENTED BY:ANJUMAN MEMAN(130223111005)

ABHISHEK PATIL(130223111013)

CONTENTIntroductionBlock diagramFlowchartSimulation toolLadder networkAdvantagesApplicationFuture development

INTRODUCTION

Two modules

Digital Visitor counter

Automatic room light controller

INTRODUCTION(CONT…)

BLOCK DIAGRAM

SENSOR (ENTRY)

PLC

SENSOR(EXIT)

RELAY

LCD DISPLAY

LIGHTS AND FANS

FLOWCHARTSTART

1 LIGHT AND A FAN

ON

COUNTER INCREMENTED BY

1

IF PERSO

N ENTER

S

IF PERSO

N EXITSCOUNTER DECREM

ENTED BY 1

IF COUNT >5 OR

MULTIPLE OF 5

IF TOTAL

COUNT-5

1 LIGHT AND A FAN

OFF

DISPLAY

Controller & Simulation toolSIMATIC controllers S7-1200 Power supply 120/240VAC with DI14×24VDC sink/source DQ 10×Relay and AI2 on board 6 High-speed counters & 4 pulse O/Ps on board Up to 3 Communication module & 8 signal modules foe I/O

expansion 0.04 ms/1000 instruction execution speed PROFINET interface for programming HMI and PLC to PLC communicatin

TIA PORTAL

LADDER NETWORK

ADVANTAGES1.Main advantage of this project is that it helps

in energy conservation. Because when there is nobody inside the room then lights are automatically turned off.

2. Human efforts to count the number of person is eliminated. Since this project does the automatic person counting with the help of two sensors installed on door frame.

3. Savings energy.

APPLICATIONDigital Visitor Counter can be used in various

rooms like seminar hall, conference hall where the capacity of room is limited and

should not be exceeded. Project will display actual number of persons inside the room.

FUTURE DEVELOPMENT1. Voice alarm system can be added to indicate

that room is full & persons can’t enter inside.2. We can increase the maximum number of

persons that can be counted by implementing the external switches and leds.

3. We can send this data to a remote location using mobile or internet.

THANK YOU