"vision paints" product brochure book

BROCHURE

BOOK

"Innovation, customer-focus, contemporary and responsible products"

The driving forces of Vision Paints - With modest beginnings in India in 1991, today, Vision

Paints is the India’s first online paint sale company in the country with a consistent track record

of being one of the fastest growing paint company, quarter on quarter, for the past few years.

Vision :

To be the most admired Indian paint and coating solutions company with globally recognised

competencies.

Mission:

To maximise trust among our customers by developing and delivering innovative and best solutions,

consistently outperforming our peers and providing a dynamic and challenging work environment for

our employees.

Vision paints:

*we believe in continuous Innovation and Change.

*This belief helps us to achieve our Goals and Perform at High Levels.

*Our guiding values arePerformance, Customer First, Ethical Practices & Valuing People.

*These four core values will help us inManaging and Meshing stakeholders expectations and

provide Integration of the Efforts that we undertake.

INTERIOR EMULSIONS

VISION EASY WASH LUXARY INTERIOR EMULSION gives a rich luxurious

finish backed up by Cross-Linking Polymers which ensure that even stubborn

stains can be cleaned easily from the wall, keeping your home looking spot-

less & beautiful day after day.

DIRECTIONS FOR USE :

1 CLEANING : Sand the surface with emery paper 150 to remove loose particles,

Paints, dust/ grease, and craked or flaked paint Wipe clean.

2 PRIMER : Apply a coat of Vision Interior Wall Primer (WT/ST). Allow drying for 6-8 hours.

3 PUTTY : Smoothen the surface by filling dents with thin coats of Vision Acrylic Wall Putty

Then, Allow drying for 4-6 hours. Sand with Emery Paper 150 and wipe clean.

4 PRIMER : Apply another coat of Vision Wall Primer (WT/ST). Allow

Drying for 6-8 hours. Sand with Emery Paper 320.

Wipe clean.

5 TOPCOAT : Thin a liter of Vision Easy Wash Luxary Interior Emulsion with 500-750 ml of

Water. Apply 2-3 coats of paint with an interval of 4-6 hours between

successive coats.

Coverage Area :

VISION EASY WASH LUXAR INTERIOR EMULSION IS IS SUITABLE FOR INTERIOR WALLS.

Usage Areas :

Packing Available :

VISION PEARL INTERIOR EMULSION gives the best-in-class coverage,

whiteness, smoothness & finish to the walls. Its enhanced bio-resistant

formula prevents the walls from fungal & algal attacks and the fine

extenders helps in giving a butter-like smooth finish to the walls.


1 CLEANING : Sand the surface with emery paper 150 to remove loose particles, Paints, dust/ grease, and craked or flaked paint Wipe clean.

2 PRIMER : Apply a coat of Vision Wall Primer (WT/ST). Allow drying for 6-8 hours.

3 PUTTY : Smoothen the surface by filling dents with thin coats of Vision Acrylic Wall Putty Then, Allow drying for 4-6 hours. Sand with Emery Paper 150 and wipe clean.

4 PRIMER : Apply another coat of Vision Wall Primer (WT/ST). Allow Drying for 6-8 hours. Sand with Emery Paper 320 Wipe clean.

5 TOPCOAT : Thin a liter of Vision Pearl Interior Emulsion with 500-650 ml of Water. Apply 2-3 coats of paint with an interval of 4-6 hours between successive coats.

VISION PEARL INTERIOR IS IS SUITABLE FOR INTERIOR WALLS.

Usage Areas :

Packing Available :

Coverage Area :

VISION SUPERCOAT INTERIOR EMULSION smooth and stylish matt finish,

making it an ideal choice for the price conscious customer. It has twice the

durability of distemper and is suitable for a wide variety of surfaces.


1 CLEANING : Sand the surface with emery paper 150 to remove loose particles,

Paints, dust/ grease, and craked or flaked paint Wipe clean.

2 PRIMER : Apply a coat of Vision Wall Primer (WT/ST). Allow drying for 6-8 hours.

3 PUTTY : Smoothen the surface by filling dents with thin coats of Vision Acrylic Wall Putty

Then, Allow drying for 4-6 hours. Sand with Emery Paper 150 and wipe clean.

4 PRIMER : Apply another coat of Vision Wall Primer (WT/ST). Allow

Drying for 6-8 hours. Sand with Emery Paper 320 Wipe clean.

5 TOPCOAT : Thin a liter of Vision Supercoat Interior Emulsion with 500 ml of

Water. Apply 2-3 coats of paint with an interval of 4-6 hours between successive coats.

Usage Areas :

Packing Available :

Coverage Area :

VISION SUPERCOAT INTERIOR EMULSION IS SUITABLE FOR INTERIOR WALLS.

DISTIMPERS

VISION MAYURI ACRYLIC DISTIMPER is suitable for interior walls.It is

available in a variety of direct shades and gives a good looking durable matt

finish for the walls.

DIRECTIONS FOR USE:

1 Prepare the surface by sanding with Emery Paper 150 and wipe clean.

2 Apply a coat of any Vision WT/ST Primer at recommended dilutions. Allow it to dry for 6-8 hours.

3 Smooten the surface by filling dents with thin coat of Vision Acrylic Wall Putty. Then, Allow it to dry for 4-6 hours. Sand the surface with Emery Paper 150 and wipe clean.

4 Apply another coat of Vision WT/ST Primer at recommended dilutions and allow it to dry for 6-8 hours. Sand with Emery Paper 320 and wipe clean.

5 Thin 1 kg Vision Mayuri Acrylic Distimper with 600-700 ml of water. Slowly add water while continuing to stir the mixture. Add 2-3 coats with brush, with minimum drying time of 4-6 hours between coats.

Coverage Area :

VISION MAYURI ACRYLIC DISTIMPER IS SUITABLE FOR INTERIOR WALLS.

Usage Areas :

Packing Available :

5 Kgs 10 Kgs 20 Kgs

VISION MAYURI STYNTHETIC DISTIMPER is suitable for interior walls. It is

a value for money product that gives you beautiful walls at an affordable

price.

DIRECTIONS FOR USE:

1 Prepare the surface by sanding with Emery Paper 150 and wipe clean.

2 Apply a coat of any Vision WT/ST Primer at recommended dilutions. Allow it to dry for 6-8 hours.

3 Smooten the surface by filling dents with thin coat of Vision Acrylic Wall Putty. Then, Allow it to dry for 4-6 hours. Sand the surface with Emery Paper 150 and wipe clean.

4 Apply another coat of Vision WT/ST Primer at recommended dilutions and allow it to dry for 6-8 hours. Sand with Emery Paper 320 and wipe clean.

5 Thin 1 kg Vision Mayuri Synthetic Distimper with 600 ml of water. Slowly add water while continuing to stir the mixture. Add 2-3 coats with brush, with minimum drying time of 4-6 hours between coats.

Coverage Area :

VISION MAYURI STYNTHETIC DISTIMPER IS SUITABLE FOR INTERIOR WALLS.

Usage Areas :

5 Kgs 10 Kgs 20 Kgs

Packing Available :

DESIGNERS

VISION PAINTS DESIGNERS is a water- based special effects paint that

creates a variety of effects on interior walls.


1 CLEANING : Sand the surface with emery paper 150 to remove loose particles,Paints, dust/ grease, and craked or flaked paint wipe clean.

Vision Paints Designers can be diluted up to 100 ml of water in 1 liter of Vision Paints Designers , if desired. Stir well & pour Vision Paints Desingers (tinted to the desired shape) onto a roller tray. Load a slightly dampened Vision Base Coat Roller & apply a coat over the dried basecoat.

2 Apply in small, Manageable sections (3”x3) and not the entire wall at a time.

3 Use the appropriate Vision Paints Designers tool to create the special effects.

Continue to work in sections (3"x3") ensuring a slight overlap of sections to maintain a wet edge.

4 Repeat the above sreps till the entire surface is completed.

Coverage Area :

Packing Available :

VISION PAINTS DESIGNERS IS SUITABLE FOR INTERIOR/EXTERIOR WALLS.

Usage Areas :

VISION PAINTS DESIGNERS (METALLICS) is a water- based special effects paint

that creates a variety of effects on interior walls.

Coverage Area :

Packing Available :

VISION PAINTS DESIGNERS (METALLICS) IS SUITABLE FOR INTERIOR/EXTERIOR WALLS.

Usage Areas :


1

CLEANING : Sand the surface with emery paper 150 to remove loose particles,Paints, dust/ grease, and craked or flaked paint wipe clean.

Vision Paints Designers (Metallics) can be diluted up to 100 ml of water in 1 liter of Vision Paints Designers , if desired. Stir well & pour Vision Paints Desingers (Metallics) (tinted to the desired shape) onto a roller tray. Load a slightly dampened Vision Base Coat Roller & apply a coat over the dried basecoat.

2 Apply in small, Manageable sections (3”x3) and not the entire wall at a time.

3 Use the appropriate Vision Paints Designers tool to create the special effects.

Continue to work in sections (3"x3") ensuring a slight overlap of sections to maintain a wet edge.

4 Repeat the above sreps till the entire surface is completed.

EXTERIOR EMULSION

WALLCOAT EXTERIOR EMULSION Is a water- based, exterior wall finish

suitable for dry to moderately humid climatic conditions.


1 CLEANING : Ensure that the surface to be painted is free from any loose paint, dust or grease. Any previous growth of fungus, algae or moss needs to be removed thoroughtly by vigorous wire brushing and cleaning with water.

2 FILLING : Surface imperfections such as holes, dents, fine cracks are to be filled with Vision Acrylic Wall Putty or a mixture of white cement & fine sand (in ratio of 1:3).

3 PRIMER : Freshly plastered surfaces must be allowed to care completely. On such surfaces, apply one coat of Vision Wall Primer (WT) by thining

1 liter of primer with 1 liter of water. Allow the Vision Wall Primer (WT) to dry for 4 hours.

4 TOPCOAT : Apply 2-3 coats by diluting 1 liter of Rangoli Exterior Emulsion with a maximum 700 ml. of water. A gap of 4-6 hours should be given between two coats. Ensure that horizontal surface like top of windows, leathers and other horizontal surfaces are painted with as additional coats for greather potection.

Coverage Area :

WALLCOAT EXTERIOR EMULSION IS SUITABLE FOR EXTERIOR WALLS.

Usage Areas :

Packing Available :

PREMIUM GLOSSY ENAMEL

VISION GLOSSY PREMIUM ENAMEL is suitable for wooden,metal and

plastered surfaces.

DIRECTIONS FOR USE:

1 CLEANING : Sand the surface with Emery Paper 150 to

remove loose particles, paint,dust/grease, and cracked or flaked paint. Wipe clean.

PRIMER: Apply a first coat of primer depending on the surface. 2

For wooden surfaces, use Vision Primer. For mild steel surfaces,

Primer ST. Allow drying for 6-8 hours.

3 PUTTY: Smoothen the surface by filling . Dents with thin coats of putty. For walls & wooden surfaces, use Vision Acrylic Wall Putty. Allow drying for 6-8 hours. Sand with Emery Paper 180 and wipe clean.

4 PRIMER: Apply another coat of Primer. Allow drying for 6-8 hours. Sand with Emery Paper 320. Wipe clean.

5 TOPCOAT: Thin a liter of Vision with 80-100 ml of mineral turpentine oil. Apply 2 coats with an interval of 8 hours between successive coats.

Packing Available :

VISION GLOSSY PREMIUM ENAMEL IS SUITABLE FOR WOODEN, METAL AND PLASTERED SURFACES.

Usage Areas :

Coverage Area :

ALL PRIMERS

VISION EXTERIOR WALL PRIMER (Water Thinnable)

is a water-based wall coating suitable for

application on the exterior as an undercoat to

exterior emulsions.

DIRECTIONS FOR USE:

1 CLEANING: Prepare the surface to be painted by sanding it with Emery 180.

Wipe the surface clean.

2 PRIMER: Vision Exterior Wall Primer (Water Thinnable) is to be thinned with water

in ratio of 1:1 by volume to obtain brushing consistency. Apply a single coat

and allow to dry for 3-4 hours.

3 PUTTY: (optional) Smoothen surface by filling dents with thin coats of Vision Acrylic Wall Putty.

Then, Allow it to dry for 4-6 hrs. Sand with Emery Paper 180. Wipe Clean.

4 PRIMER: If putty has been used, apply a coat of primer to avoid a patchy

appearance. Allow it to dry for 3-4 hours. Sand with Emery Paper 320 before application of topcoat.

Coverage Area :

Usage Areas : VISION EXTERIOR WALL PRIMER (Water Thinnable) IS SUITABLE FOR EXTERIOR WALLS.

Packing Available :

VISION WALL PRIMER (Solvent Thinnable) is a Solvent-based wall coating

suitable for application on the interior as an undercoat to interior

emulsions.

DIRECTIONS FOR USE:

1 CLEANING: Prepare the surface by sanding with Emery Paper 180 Wipe Clean.

2 PRIMER: Vision Wall Primer - Solvent Thinnable is to be thinned with

Primer with 100 ml thinner. Apply a single coat and allow to dry for 5-8 hours.

3 PUTTY: (Optional) Smoothen surface by filing dents with thin coats of Vision Acrylic Wall Putty.


4 PRIMER: If putty has been used, apply a coat of primer to avoid a patchy dry

for 6-8 hours. Sand with Emery Paper 320 before application of topcoat.

Coverage Area :

Packing Available :

Usage Areas : VISION WALL PRIMER (Solvent Thinnable) IS SUITABLE FOR INTERIOR WALLS.

VISION WALL PRIMER (Water Thinnable) is a water-based wall coating

suitable for application on the interior as an undercoat to interior

emulsions.

Usage Areas : VISION WALL PRIMER (Water Thinnable) IS SUITABLE FOR INTERIOR WALLS.

DIRECTIONS FOR USE:

1 CLEANING: Prepare the surface to be painted by sanding it with Emery 180.

Wipe the surface clean.

2 PRIMER: Vision Wall Primer (Water Thinnable) is to be thinned with water

in ratio of 1:1 by volume to obtain brushing consistency. Apply a single coat

and allow to dry for 3-4 hours.

3 PUTTY: (optional) Smoothen surface by filling dents with thin coats of Vision Acrylic

Wall Putty .Then, Allow it to dry for 4-6 hrs. Sand with Emery Paper 180. Wipe Clean.

4 PRIMER: If putty has been used, apply a coat of primer to avoid a patchy

appearance. Allow it to dry for 3-4 hours. Sand with Emery Paper 320 before

application of topcoat.

Coverage Area :

Packing Available :

VISION PAINTS ACRYLIC WALL PUTTY is a water based putty suitable for

interior and exterior walls. It is a value for money product that gives you

beautiful walls at an affordable price.

Coverage Area :

VISION PAINTS ACRYLIC WALL PUTTY IS SUITABLE FOE INTERIOR/EXTERIOR WALLS.

Usage Areas :

5 Kgs 10 Kgs 20 Kgs

Packing Available :

DIRECTIONS FOR USE:

1 CLEANING: Prepare the surface by sanding with Emery Paper 180. Wipe Clean.

2 PRIMER: Apply a single coat of VISION PAINTS WALL PRIMER and allow to dry for 6-8 hours.

3 PUTTY: Smoothen surface by filing dents with thin coats of VISION PAINTS ACRYLIC WALL PUTTY .

Then, Allow it to dry for 4-6 hrs. Sand with Emery Paper 180.

And Wipe Clean.

4 Apply another coat of primer.Sand the surface with Emery paper 320 and Wipe clean.

Now apply the topcoat.

RED OXIDE METAL PRIMER

VISION RED OXIDE METAL PRIMER (Solvent Thinnable) is applicable on

metals that gives superior adhesion and better perfomance of the paint

film.

DIRECTIONS FOR USE:

1 CLEANING: Prepare the surface by sanding with Emery Paper 180. Wipe Clean.

2 PRIMER: Vision Red Oxide Metal Primer - Solvent Thinnable is to be thinned with

mineral Turpentine Oil to obtain brushing consistency. Thin 1Ltr of

Primer with 100 ml thinner. Apply a single coat and allow to dry for 5-8 hours.

3 PUTTY: (Optional) Smoothen surface by filing dents with thin coats of Knifing Paste Filler Putty.


4 PRIMER: If putty has been used, apply a coat of Vision Red Oxide Metal primer to avoid a

patchy dry for 6-8 hours. Sand with Emery Paper 320 before application of topcoat.

Usage Areas : VISION RED OXIDE METAL PRIMER (Solvent Thinnable) IS SUITABLE FOR METAL SURFACES.

Coverage Area :

Packing Available :

LITTLE MASTER

VISION PAINTS LITTLE MASTER it is formulated with 100% Acrylic

Elaslomeric Polymers that expand and contract with the substrate and

prevent development of hairline cracks over a long period of time. The heat

reflecting particles present in Vision Paints Little Master reflects Visible

Radiation and infrared rays, thereby reducing heat buildup and keeping

the surface cool.

DIRECTIONS FOR USE : SURFACE PREPARATION : 1.Clean the surface thoroughly, as it should be free from dust, oil, grease or any free/loose particle. 2.Remove the existing paint layer/coatings before application. 3.It is recommended to use wire brush followed by sanding with emery 180. 4.Water wash the surface before applying first coat application. APPLICATION : 1.Mix/stir the material thoroughly. 2.Apply the first coat (Little master : Water = 2 : 1). 3.Wait for minimum 1 to 2 hour & then apply second coat (Pure Coat of Vision Paints Little Master). 4.Confirm that after third or fourth coat the surface is opaque. 5.Let the final coat cure for 20-40 hours before use.

Usage Areas :

Packing Available :

1 Kgs 6 Kgs 11.25 Kgs 22.5 Kgs

VISION PAINTS LITTLE MASTER IS SUITABLE FOR METALSSURFACES/INTERIOR/EXTERIOR WALLS.

Coverage Area :

Contact Us Customer Care:

Phone number: +918696012321 (10 AM - 7 PM)

Email: [email protected]

Our Address:

HOUSE OF VISION PAINTS

Basni II Phase , Jodhpur (Raj.) -342003

Affiliate Related Queries:

For any queries regarding affiliate partnerships, please

contact us at [email protected]