View JCL and JCL Overrides in Zeke

For Zeke scheduled jobs, you may verify the JCL for any job in the Zeke current schedule. It is a good practice to use this method to verify JCL overrides made to jobs in the current schedule. After the PCRS requesting the JCL override is completed by Production Control/Response, you can verify the override was made as expected.

1) Bring up the Schedule View (option 2 from primary menu) and enter Jobname or application ID to bring up list of Job(s).

2) In the Line Cmd column enter ZO (for zoom) next to the job you want to see the JCL for (reference Screen Print #1).

3) Tab down and enter B (for browse) as indicated in Screen Print #2 or Screen Print #3 depending on which one matches what you see on your screen. If your screen matches Screen Print#3, you must put the B (for browse) next to the “JCL--> Override present…” line near the bottom of the screen to see the override.

4) JCL is displayed, page up/down to see JCL and verify override is correct. Screen Print #4 shows that the requested override is there and correct as requested (PCRS #74617).

5) Press PF3 key to exit each screen.

4/10/2023 6:14 PM Page 1 of 4

View JCL and JCL Overrides in Zeke

4/10/2023 6:14 PM Page 2 of 4

View JCL and JCL Overrides in Zeke

4/10/2023 6:14 PM Page 3 of 4

View JCL and JCL Overrides in Zeke

4/10/2023 6:14 PM Page 4 of 4