version 4.2 t801/t810/t812 installation guide€¦ · screws list a b c d e f g h m3.5 x 8mm screws...
TRANSCRIPT
-
T801/T810/T812 Installation GuideVersion 4.2
V180720
-
OVERVIEWTop Panel
Left panel
Front Panel
Foot Pad x4
Right Panel
Power SwitchBottm Cover
Middle Plate
Aluminum Frame (short ones) x2
Aluminum Frame (long ones) x4 HDD Bracket
Rear Panel
Front I/O Module
GPU Holder
-
SCREWS LISTA B C D
E F G H
M3.5 x 8mm screws for power switch ,3.5" HDD
10mm Standoffs M3 Nuts
M4 x 8mm screws for GPU, Aluminum Frame
M3x8mm screws for Nuts, Aluminum Frame
M3x5mm screws for Motherboard
M3 x 10mm for2.5” HDD
Screws for Fan
-
Please read the “Aluminum Frame installation”before assembling this case
01 02
03 04
Aluminum Frame installation Screw
AcrylicPlate
Nuts
-
9X
9X
Please install the standoffs according to the holes on your motherboard
STEP 01 Install the 10mm Standoffs on the Middle Plate
Standoffs
M3x8mm screw
-
2X
2X
2X
For the previous version 4.1 (include the older version) Please reverse the USB front I/O module to the opposite side first, then install with the 12mm standoffs.
STEP 02 Install the Front I/O Module
-
8X
8X
STEP 03 Install the Middle Plate
-
3X
3X
STEP 04 Install the Rear Panel
-
4X
STEP 05 Install the Fan on the Rear Panel
-
4X
STEP 06 Install the Power Supply
-
9X
STEP 07 Install the Motherboard Please install the CPU cooler and ram on the motheboard first
-
STEP 08 Install the GPU Card
-
2X
STEP 09 Install the GPU Card For V4.1 (include the old version), please refer to the old installation guide
-
3X
3X
STEP 10 Install the Aluminum Frame on the Rear Panel
-
8X
STEP 11 Install the Fan on the Left Panel
-
2X
8X
2X
STEP 12 Install the Left Panel and Right Panel
-
H
2.5” HDD will need two M3x10mm screws to fix on one side
STEP 13 Install the HDD
-
STEP 14 Install the Power Switch
-
6X
6X
STEP 15 Install the Front Panel
-
Screws for Foot
pad
12X
12X
STEP 16 Install the Bottom Cover
-
6X
6X
STEP 17 Install the Top Panel
-
STEP 17 Complete