veritasâ„¢ cluster server management pack guide for microsoft
TRANSCRIPT
Veritas™ Cluster ServerManagement Pack Guide forMicrosoft System CenterOperations Manager 2007
Windows
VCS Management Pack
Veritas™ Cluster Server Application Management PackGuide for Microsoft System Center Operations Manager2007
The software described in this book is furnished under a license agreement andmay be usedonly in accordance with the terms of the agreement.
Product version:
Document version:
Legal NoticeCopyright © 2012 Symantec Corporation. All rights reserved.
Symantec, the Symantec logo, Veritas, Veritas Storage Foundation, CommandCentral,NetBackup, Enterprise Vault, and LiveUpdate are trademarks or registered trademarks ofSymantec corporation or its affiliates in the U.S. and other countries. Other names may betrademarks of their respective owners.
This Symantec product may contain third party software for which Symantec is requiredto provide attribution to the third party (“Third Party Programs”). Some of the Third PartyPrograms are available under open source or free software licenses. The LicenseAgreementaccompanying the Software does not alter any rights or obligations you may have underthose open source or free software licenses. See the Third-party Legal Notices documentfor this product, which is available online or included in the base release media.
The product described in this document is distributed under licenses restricting its use,copying, distribution, and decompilation/reverse engineering. No part of this documentmay be reproduced in any form by any means without prior written authorization ofSymantec Corporation and its licensors, if any.
THEDOCUMENTATIONISPROVIDED"ASIS"ANDALLEXPRESSORIMPLIEDCONDITIONS,REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OFMERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT,ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TOBELEGALLYINVALID.SYMANTECCORPORATIONSHALLNOTBELIABLEFORINCIDENTALOR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE FURNISHING,PERFORMANCE, OR USE OF THIS DOCUMENTATION. THE INFORMATION CONTAINEDIN THIS DOCUMENTATION IS SUBJECT TO CHANGE WITHOUT NOTICE.
The Licensed Software andDocumentation are deemed to be commercial computer softwareas defined in FAR12.212 and subject to restricted rights as defined in FARSection 52.227-19"Commercial Computer Software - Restricted Rights" and DFARS 227.7202, "Rights inCommercial Computer Software or Commercial Computer Software Documentation", asapplicable, and any successor regulations. Any use, modification, reproduction release,performance, display or disclosure of the Licensed Software andDocumentation by theU.S.Government shall be solely in accordance with the terms of this Agreement.
Symantec Corporation350 Ellis StreetMountain View, CA 94043
http://www.symantec.com
Technical SupportSymantec Technical Support maintains support centers globally. TechnicalSupport’s primary role is to respond to specific queries about product featuresand functionality. TheTechnical Support group also creates content for our onlineKnowledge Base. The Technical Support group works collaboratively with theother functional areas within Symantec to answer your questions in a timelyfashion. For example, theTechnical Support groupworkswithProductEngineeringand Symantec Security Response to provide alerting services and virus definitionupdates.
Symantec’s support offerings include the following:
■ A range of support options that give you the flexibility to select the rightamount of service for any size organization
■ Telephone and/or Web-based support that provides rapid response andup-to-the-minute information
■ Upgrade assurance that delivers software upgrades
■ Global support purchased on a regional business hours or 24 hours a day, 7days a week basis
■ Premium service offerings that include Account Management Services
For information about Symantec’s support offerings, you can visit our Web siteat the following URL:
www.symantec.com/business/support/index.jsp
All support services will be delivered in accordance with your support agreementand the then-current enterprise technical support policy.
Contacting Technical SupportCustomers with a current support agreement may access Technical Supportinformation at the following URL:
www.symantec.com/business/support/contact_techsupp_static.jsp
Before contacting Technical Support, make sure you have satisfied the systemrequirements that are listed in your product documentation. Also, you should beat the computer onwhich the problemoccurred, in case it is necessary to replicatethe problem.
When you contact Technical Support, please have the following informationavailable:
■ Product release level
■ Hardware information
■ Available memory, disk space, and NIC information
■ Operating system
■ Version and patch level
■ Network topology
■ Router, gateway, and IP address information
■ Problem description:
■ Error messages and log files
■ Troubleshooting that was performed before contacting Symantec
■ Recent software configuration changes and network changes
Licensing and registrationIf yourSymantecproduct requires registrationor a licensekey, access our technicalsupport Web page at the following URL:
www.symantec.com/business/support/
Customer serviceCustomer service information is available at the following URL:
www.symantec.com/business/support/
Customer Service is available to assist with non-technical questions, such as thefollowing types of issues:
■ Questions regarding product licensing or serialization
■ Product registration updates, such as address or name changes
■ General product information (features, language availability, local dealers)
■ Latest information about product updates and upgrades
■ Information about upgrade assurance and support contracts
■ Information about the Symantec Buying Programs
■ Advice about Symantec's technical support options
■ Nontechnical presales questions
■ Issues that are related to CD-ROMs or manuals
Support agreement resourcesIf youwant to contact Symantec regarding an existing support agreement, pleasecontact the support agreement administration team for your region as follows:
[email protected] and Japan
[email protected], Middle-East, and Africa
[email protected] America and Latin America
DocumentationYour feedback on product documentation is important to us. Send suggestionsfor improvements and reports on errors or omissions. Include the title anddocument version (located on the second page), and chapter and section titles ofthe text on which you are reporting. Send feedback to:
For information regarding the latest HOWTO articles, documentation updates,or to ask a question regarding product documentation, visit the Storage andClustering Documentation forum on Symantec Connect.
https://www-secure.symantec.com/connect/storage-management/forums/storage-and-clustering-documentation
About Symantec ConnectSymantec Connect is the peer-to-peer technical community site for Symantec’senterprise customers. Participants can connect and share informationwith otherproduct users, including creating forum posts, articles, videos, downloads, blogsand suggesting ideas, as well as interact with Symantec product teams andTechnical Support. Content is rated by the community, and members receivereward points for their contributions.
http://www.symantec.com/connect/storage-management
Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Chapter 1 VCS Mangement Pack monitoring rules . . . . . . . . . . . . . . . . . . . . . . . . . . 9
About the VCS Mangement Pack .... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Alerts and Events ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Views .... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Groups .... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Chapter 2 Deploying the VCS Management Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Supported Software .... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Before you import the VCS Management Pack .... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Importing the VCS Management Pack .... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Chapter 3 VCS Management Pack monitoring rules . . . . . . . . . . . . . . . . . . . . . . . 17
About monitoring rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17HAD monitoring rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17GAB monitoring rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56LLT monitoring rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58Agents monitoring rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
VMDg event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59MountV agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61ElifNone agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63FileNone agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63FileOnOff agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63FileOnOnly agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64FileShare agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64Internet Information Services (IIS) agent event processing
rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66GenericService event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71Microsoft Virtual Machine (MSVirtualMachine) agent event
processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73PrintShare agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74PrintSpool agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Contents
Proxy agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78IP agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79IPMultiNicPlus agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80NetLsnr agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83NIC agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83NotifierMngr agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84Registry Replication (RegRep) agent event processing rules ... . . . . . . . . 85Lanman agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87VvrRvg agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90RVGPrimary agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Enterprise application agents ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95MSDTC event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95MSSearch event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97SQL Server 2012 Agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . 99SQL Server 2008 Agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . 100SQL Server 2005 Agent Service event processing rules ... . . . . . . . . . . . . . 100SQL Server 2005 OLAP Service event processing rules ... . . . . . . . . . . . . . . 102SQL Server 2005 event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104Service Monitor event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106Oracle Agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107NetAppFiler agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108NetAppSnapDrive agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . 109NetAppSnapMirror agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . 110
Agent Framework monitoring rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Contents8
VCS Mangement Packmonitoring rules
This chapter includes the following topics:
■ About the VCS Mangement Pack
■ Rules
■ Alerts and Events
■ Views
■ Groups
About the VCS Mangement PackThe Veritas Cluster Server (VCS) Management Pack for Microsoft System CenterOperationsManager 2007 (SCOM) helps youmonitor VCS components in a SCOMmonitoring environment.
Table 1-1 lists the details of the VCS Management Pack for SCOM 2007.
Table 1-1 VCS Management Pack
DescriptionFile Name
The management pack that contains rules formonitoring VCS components.
Symantec.SFW.HA.mp
TheVCSManagement Pack, Symantec.SFW.HA.mp, is a sealedmanagement packthat contains rules to monitor the following VCS components:
1Chapter
Table 1-2 VCS Management Pack: VCS components monitored
DescriptionComponent name
Thehigh availability engine, orHAD, is themainVCSdaemonrunning on each system. It is responsible for building therunning cluster configuration from the configuration files,distributing the informationwhennewnodes join the cluster,responding to operator input, and taking corrective actionwhen something fails. The VCS Management Pack monitorsthe status of the HAD and notifies the user in case of errors.
Engine (HAD)
Group Membership Services/Atomic Broadcast (GAB) isresponsible for cluster membership and clustercommunications. The VCS Management Pack monitors thestatus of the cluster memberships and communications.
GAB
VCS uses private network communications between clusternodes for cluster maintenance. The Low Latency Transport(LLT) functions as a high-performance, low-latencyreplacement for the IP stack, and is used for all clustercommunications. The VCS Management Pack monitors theLLT status.
LLT
The VCS Management Pack monitors the status of the VCSBundled agents and Enterprise agents. The VCS agentframework is a set of common, predefined functions compiledinto each agent. These functions include the ability to connectto the VCS engine (HAD) and to understand commonconfiguration attributes. The agent framework frees thedeveloper fromdeveloping support functions required by thecluster, and instead focus on controlling a specific resourcetype. The VCS management pack monitors the status of thecommon agent framework.
Agents (Agent Framework)
The VCS Management Pack contains the following monitors:
■ VCS for Windows Installation by Symantec
■ VeritasClusterThese monitors are the targets for the rules defined in the VCS ManagementPack.
RulesThe VCS Management Pack rules collect data, such as events, from the logsgenerated by theVCS components. Someof the rules have an associated alert that
VCS Mangement Pack monitoring rulesRules
10
notifies the administrator about the event that triggered the alert. You can viewtheVCS rules after you import theVCSManagement Pack inOperationsManager2007.
See “About monitoring rules” on page 17. for a detailed list of VCS rules.
Alerts and EventsDepending on the rule and the alert that has been set for an event, an appropriatealert is generated when the event is received on the Operations Manager 2007server. An alert notifies the administrator about the event that triggered the alert.
Each rule that generates the alert assigns an alert level that indicates the severityof that event. You can use the severity level to determine the importance of thealert and the necessary steps required to address the alert.
Note: The VCS Management Pack does not include a notification group forautomatic alerts by e-mail. If e-mail alerts are required, you must add the alertprocessing rules manually.
ViewsViews are groups of managed objects that have a commonality, which is definedin the view properties. The views supported by the VCSManagement Pack enableyou to monitor the health of the VCS components within the managedenvironment. These views enable you to assess the state of the required clusternode within the managed environment.
When you import the VCS Management Pack, an item named Veritas ClusterServer by Symantec is created under theMonitoring node in theMonitoring paneof the Operations Manager 2007 console. Expand Veritas Cluster Server bySymantec to see the views supported by the VCS Management Pack.
The following views are supported:
■ Active AlertsThis viewprovides a list of alerts that are openand require action for computersin the All Computers in Management Pack - Symantec.SFW.HA group. Itindicates the current state and severity of those alerts.
■ State ViewThis view provides a real-time, consolidated look at the health of the clusterwithin the managed environment, highlighting the systems that require
11VCS Mangement Pack monitoring rulesAlerts and Events
attention. It displays the state of the service groups and the resourcesconfigured in the service group.In theMonitoring pane, expandVeritasClusterServerbySymantec and clickStateView. In the StateViewpane, click an item in theVeritasCluster column.The Detail View section displays the status of the service group and theresources. Depending on the state the status is displayed as follows:
■ Healthy:Indicates that the service group and its resources are online onthe node.
■ Warning: Indicates that the service group is partially online on the node.
■ Critical: Indicates that either the service group or the resources in theservice group have faulted on the node.Whenever a service group or a resource in a service group faults on a node,an appropriate alert is generated.VCS management pack has a separate monitor for monitoring the healthof the Veritas High Availability Daemon (HAD). If HAD is not running ona node, then an appropriate alert is generated. This alert stays active untilthe time HAD starts on that node. As soon as HAD starts on the node, thisalert gets resolved automatically. To enable the state view display for VCS,the following rules have been created in VCS for Windows Installation bySymantec:
■ VeritasCluster Service Discovery
■ VeritasCluster State MonitoringThe scripts that these rules invoke, internally use theMOMUtil.exe utility.The MOMUtil utility discovers all the service groups and resources in thecluster and then gathers the state related information for all the servicegroups and resources.
■ AlertsDisplays alerts for the VCS components: Agents, Engine, GAB, and LLT. Thisview provides a list of issues and the current state and severity of each alert.It indicateswhether the alerts have been acknowledged, escalated, or resolved,and also whether a Service Level Agreement has been breached.
■ EventsDisplays events for the VCS components: Agents, Engine, GAB, and LLT. TheEvent view provides a list of events that have occurred on managed servers,a description of each event, and the source of the problem.
VCS Mangement Pack monitoring rulesViews
12
GroupsGroups in Operations Manager 2007 are logical collections of objects such ascomputers, hard-disks, or instances of SQL or Exchange. Groups help define onwhich computers the rules are deployed. When you import the VCS ManagementPack, the following groups are created:
■ Veritas Cluster Server by Symantec Computer Group—Includes Windowsservers running Veritas Cluster Server 5.1 or later.
■ All Computers in ManagementPack: Symantec.SFW.HA—Contains all thecomputers that are discovered as a part of other computer groups defined inManagementPack Symantec.SFW.HA
These groups are located under the Groups node in the Authoring pane of theOperations Manager 2007 Console.
13VCS Mangement Pack monitoring rulesGroups
VCS Mangement Pack monitoring rulesGroups
14
Deploying the VCSManagement Pack
This chapter includes the following topics:
■ Supported Software
■ Before you import the VCS Management Pack
■ Importing the VCS Management Pack
Supported SoftwareThe VCS Management Pack is compatible with the following product versions:
■ Microsoft System Center Operations Manager 2007 SP1
■ Microsoft System Center Operations Manager 2007 R2
■ Storage Foundation and HA 5.1 for Windows or later
■ Veritas Cluster Server 5.1 for Windows or later
Before you import the VCS Management PackEnsure that the following prerequisites are complete before you proceed:
■ Verify that Operations Manager 2007 infrastructure is set up and configuredcorrectly.See the Microsoft System Center Operations Manager 2007 documentationfor more information.
■ Download and import the VCS LibraryManagement Pack on themanagementserver.
2Chapter
Refer to theVeritas Cluster Server LibraryManagement PackGuide for SystemCenter OperationsManager 2007 for instructions. This guide is available withtheVCSLibraryManagementpack. Ensure that you complete all theproceduresmentioned in the guide.
Importing the VCS Management PackImport the VCSManagement Pack file, Symantec.SFW.HA.mp, on the operationsmanagement server. Procedures for importingamanagementpackvarydependingon the version of System Center Operations Manager 2007.
Refer to the SystemCenter OperationsManager 2007 documentation and use theappropriate procedure.
Deploying the VCS Management PackImporting the VCS Management Pack
16
VCS Management Packmonitoring rules
This chapter includes the following topics:
■ About monitoring rules
■ HAD monitoring rules
■ GAB monitoring rules
■ LLT monitoring rules
■ Agents monitoring rules
■ Enterprise application agents
■ Agent Framework monitoring rules
About monitoring rulesThis chapter lists themonitoring rules forVCS components. Themonitoring rulesconsist of event processing rules and alert processing rules.
HAD monitoring rulesTable 3-1 lists the rules for the VCS High Availability Engine (HAD).
3Chapter
Table 3-1 HAD Monitoring Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
NYWarningIncorrect snmp commandHAD10746
NYWarningUnexpected return valueHAD10755
NYWarningNode id expectedHAD10761
NYWarningToo many optionsHAD10772
NYWarningMust specify the type nameHAD10792
NYWarningToo few argumentsHAD10799
NYWarningConnection timed outHAD10805
NYWarningError while registering resourceHAD10806
NYWarningValue type not supportedHAD10809
NYWarningInvalid group dependency typespecified: %1
HAD10811
NYWarningUnable to open file ‘%1’. The filemay be corrupted or does notexist.
HAD10813
NYWarningIncorrect LDF path specifiedHAD10814
NYWarningIncorrect message severityspecified
HAD10815
NYWarningIncorrect object type specifiedHAD10816
NYWarningIncorrect object name specifiedHAD10817
NYWarningVCS object tag does not have anobject name
HAD10818
NYWarningIncorrect message ID specifiedHAD10819
NYWarningNo messages match your queryHAD10821
NYWarningNo log files availableHAD10822
NYWarningIncorrect language specifiedHAD10823
VCS Management Pack monitoring rulesHAD monitoring rules
18
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
NYWarningUnable to open file ‘%1’. This filewas generated by a newerversion of the VCS engine.
HAD10824
NYWarningTail value must be an integervalue greater than 0
HAD10825
NYWarningIncorrect system specified forcheckpartial option
HAD10826
NYErrorhacf -status died. Transitioningto STALE_DISCOVER_WAIT
HAD11005
NYErrorExiting:Cannot lock %1 error =%2
HAD11007
NYErrorExiting: Another copy of VCSmay be running
HAD11009
NYWarningCannot lock file: %1 error = %2HAD11012
NYWarningCannot write ‘%1’ to %2HAD11014
NYErrorEnvironment variable %1 is notdefined
HAD11015
NYErrorFailed to interpret line %1HAD11016
NYWarningFailed to notify service ctlmanager (SCM)
HAD11021
NYWarningSystem name retrieval failedHAD11024
NYErrorError querying Registry value%1
HAD11028
NYWarningHAD not ready to receive thiscommand. Message was: 0x%1
HAD11030
NYErrorGABTCP open failed. Exiting.HAD11031
NYErrorRegistration failed. Exiting.HAD11032
NYErrorGAB open failed. Exiting.HAD11033
NYErrorGAB recv failed. Exiting.HAD11036
19VCS Management Pack monitoring rulesHAD monitoring rules
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
NYErrorFailed toStartServiceCtrlDispatcher %1
HAD11037
NYErrorFailed to open had serviceHAD11038
NYErrorFailed to makeMSG_CLUSTER_STOP_SYS.
HAD11039
NYWarningEngine Stopping Deleting vlistfor %1
HAD11041
NYWarningUnknownmajor/minormsg=%1HAD11043
NYWarningUnable to create temporary fileHAD1045
NYWarningLocal system not availableHAD1046
NYWarningUnable to execute the hastatusprint command
HAD1047
NYWarningUnknown process-registrationmsg: %1
HAD11055
NYWarningGroup ‘%1’ does not exist.Resources added laterwill not beregistered.
HAD11062
NYWarningType ‘%1’ does not exist.Resources added laterwill not beregistered
HAD11064
NYWarning%1 is an invalid TAGHAD11084
NYErrorExiting: Cannot make directory:%1
HAD11086
NYWarningAnotherhashadowrunning.VCSengine is exiting.
HAD11098
NYErrorVCS exited. It will restart .HAD11103
NYErrorVCS has faulted %1 times since%2 hashadow will not restartVCS. Correct the problem andrestart VCS.
HAD11104
VCS Management Pack monitoring rulesHAD monitoring rules
20
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
NYWarningCannot get lock on file: %1HAD11106
NYWarningCannot start had. Error=0x%1HAD11108
NYWarningCannot start had. Error=%1HAD11109
NYWarningMemory allocation failed.HAD11113
NYWarningNo username.HAD11130
NYWarningIncorrect username.HAD11131
NYWarningCannot get password -- error0x%1
HAD11135
NYWarningCannot encryptpassword -- error0x%1
HAD11137
NYWarningCannotioctl(IOCTL_LLT_GETPARAM/LP_MAXLINKS(Windows Error Code = %1)
HAD11148
NYWarningCannotioctl(IOCTL_LLT_GETLINKINFO(Windows Error Code = %1)
HAD11149
NYWarningCannotioctl(IOCTL_LLT_GETPARAM/LP_MAXNODE(Windows Error Code = %1)
HAD11150
NYWarningCannotioctl(IOCTL_LLT_GETNODEALL(Windows Error Code = %1)
HAD11151
NYWarningCannot malloc(%1 for msgbuf)HAD11152
NYWarningCannotioctl(IOCTL_LLT_GETPARAM/LP_MAXNODE)
HAD11154
NYWarningCannotioctl(IOCTL_LLT_GETNODEALL)
HAD11164
NYWarningError opening /dev/gab_0HAD11165
21VCS Management Pack monitoring rulesHAD monitoring rules
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
NYWarningError opening /dev/lltHAD11166
NYWarningCannotioctl(IOCTL_LLT_GETLINKINFO)
HAD11168
NYErrorFailed to get Link heartbeatstatus.
HAD11169
NYErrorFailed to get Disk heartbeatstatus.
HAD11170
NYWarningCannotioctl(IOCTL_LLT_GETPARAM/LP_MAXLINKS)
HAD11171
NYErrorSystem shutting down on %1HAD11274
NYWarningRetry Interval is %1 at fault %2HAD11277
NYWarningError on executing gab_getdisk.HAD11278
NYWarningFailed to read file ‘%1’HAD11279
NYWarninghadiscover could not findfunction (%1) in library
HAD11280
NYWarningDiscovery of %1 attribute failedHAD11281
NYWarningFailed to list discoverableattributes
HAD11282
NYWarningDiscovery not supported forType %1
HAD11283
NYWarningYour evaluation period hasexpired. VCS will not start thenext time you invoke hastart
HAD11284
NYError[Licensing] You have %1 day(s)left in your VCS evaluationperiod
HAD11285
NYWarningUpdating license key on %1HAD11286
VCS Management Pack monitoring rulesHAD monitoring rules
22
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
NYErrorFailed to update engine’s copy oflicense key
HAD11287
NYWarningLicense keyupdated successfullyon the local node. The halicutility needs to be run on allnodes in the cluster in order forthe VCS license to be updatedproperly
HAD11288
YYErrorLicense key is not unique withincluster. Failed to update licensekey.
HAD11289
NYWarningWARNING:Oneormore systemsare not online.
HAD11290
NYWarningCanceling license key updateHAD11291
NYWarningWARNING:halic is unable todetermine whether or\nnot thiskey is unique within the cluster.Duplicate keys\nwill preventnodes from rejoining thecluster.\n\nDo you wish tocontinue? [Y/N]:
HAD11292
YYErrorUser name is a reserved word orcontains invalid character(s)
HAD11300
YYErrorSystem can not be restarted:err:%1
HAD11301
YYErrorExiting: HAD has encountered acritical error. Please checkVCS_HOME/log/drwatson forlogs
HAD11303
NYWarningPlease enter valid Englisharguments
HAD11304
NYWarningConfiguration must beReadWrite
HAD11309
23VCS Management Pack monitoring rulesHAD monitoring rules
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
YYErrorUser name should be of theformat user@domain
HAD11316
NYWarning‘%1’ is an invalid debug log tag.HAD11317
NYWarningCannot specify both -sev and-dbg
HAD11318
NYWarningThe -parameters option must bethe last option specified
HAD11319
NYWarningMust also specify -parameterswhenusing the -encoding option
HAD11320
NYWarningInvalid message specifiedHAD11321
NYWarningInvalid system specifiedHAD11322
NYWarningInvalid severity specifiedHAD11323
NYWarningInvalid debug level specifiedHAD11325
NYWarningMessage IDmust beunder 65535HAD11327
NYWarningInvalid message ID specifiedHAD11328
NYWarningInvalid encoding specifiedHAD11329
NYWarningInvalid parameters specifiedHAD11330
YYErrorExiting:Cannot register withSCM(service ctl manager) .err:%1.
HAD11331
NYWarningError - %1 (%2) in file %3:%4HAD12021
NYWarningFailed to get working directoryHAD12022
NYWarningUnsuccessful openof ipmserviceHAD12023
NYWarning%1 %2 has anAdministrators/Operators listwithout any users defined
HAD12025
NYWarningTypes file should have a .%1extension
HAD12026
VCS Management Pack monitoring rulesHAD monitoring rules
24
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
NYWarningCannot mkdir %1HAD12027
NYWarningCannot chdir %1HAD12028
NYWarning%1 does not have a listHAD12029
NYWarningCannot open lock file: errno=%1HAD12030
NYWarningConfiguration lockedHAD12031
NYWarningCannot create file: %1HAD12032
NYWarningCannot open file: %1HAD12033
NYWarningUser %1 in %2 %3 %4HAD12034
NYWarningError deleting file: %1HAD12035
NYWarningSource file should have a .%1extension
HAD12036
NYWarningIncorrect syntax for value ofattribute SourceFile for type %1: %2
HAD12037
YYErrorExiting: Cannot chdir %1.HAD12038
NYWarningCannot open file: %1 error = %2HAD12039
NYWarningFailed to change to workingdirectory
HAD12040
NYWarningKeyword i18nstr found :%1\nLocalized input notallowed.
HAD12041
NYWarningFailed to dump the configurationfrom the live engine
HAD12043
NYWarningConfiguration staleHAD12046
NYWarningCannot fork %1HAD12047
NYWarningDestination file should have a.%1 extension
HAD12048
NYWarningIllegal group dependency clauseHAD12051
25VCS Management Pack monitoring rulesHAD monitoring rules
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
NYWarningCannot open input file: %1HAD12054
NYWarningUnexpected EOF: %1HAD12055
NYWarningParent resource %1 does notexist %2
HAD12056
NYWarningChild resource%1does not exist%2
HAD12057
NYWarningUnknown type %1 %2HAD12058
NYWarningExpecting -keysHAD12059
NYWarningCannot find attribute %1HAD12060
NYWarningScalar attributes cannot havemultiple values
HAD12061
NYWarningCannot find resource %1HAD12062
NYWarningUnknown subcommand %1HAD12065
NYWarningNot enough argumentsHAD12066
NYWarningUnexpected attribute %1HAD12071
NYWarningCannot find group %1HAD12076
NYWarningCannot find system %1HAD12083
NYWarningExpecting haevent -addHAD12085
NYWarningUnknown event %1HAD12086
NYWarningUnknown command %1HAD12087
NYWarningUnknown event subcommand%1
HAD12088
NYWarningUnexpected message: %1HAD12089
NYWarningUnknown message: %1HAD12090
NYWarningIpm send failureHAD12092
NYWarningRecvb failureHAD12093
VCS Management Pack monitoring rulesHAD monitoring rules
26
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
NYWarningAborting hacf: errorsencountered
HAD12095
NYWarningDuplicate definition for %1 at%2:%3
HAD12097
NYWarningParent resource %1 and childresource%2donot belong to thesame group
HAD12102
NYWarningCannot find attribute def for%1.%2
HAD12103
NYWarningExpecting a list for %1HAD12104
NYWarningCannot open output %1HAD12105
NYWarningIpm sendrecvb failureHAD12109
NYWarningConfiguration may contain onlyone cluster clause
HAD12111
NYWarningSystem %1 defined more thanonce
HAD12113
NYWarningGroup %1 defined more thanonce
HAD12114
NYWarningGroup %1 cannot have morethan one group dependencyclause
HAD12115
NYWarningGroup %1 has a local attributewithout a SystemList
HAD12116
NYWarningSystem %1 not on SystemList ofgroup %2
HAD12117
NYWarningQualified name not foundHAD12120
NYWarningValue for attribute%1not foundHAD12121
NYWarningReserved word - %1 - cannot beused to name objects orattributes
HAD12122
27VCS Management Pack monitoring rulesHAD monitoring rules
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
NYWarningType%1definedmore thanonceHAD12123
NYWarningCannot find group %1 %2HAD12127
NYWarningResource%1 is%2 andmust nothave children
HAD12128
NYWarningResource %1 in a cycleHAD12129
NYWarningGroup %1 does not existHAD12130
NYWarningGroup %1 contains groupdependency cycles
HAD12131
NYWarningGroup %1 contains too deepgroup dependency
HAD12133
NYWarningSystemList for group %1containsnon-existent system%2
HAD12134
NYWarningGroup %1 has an AutoStartListwithout a SystemList
HAD12135
NYWarningSystem %1 in the AutoStartListof group %2
HAD12136
NYWarningInvalid Resource Type %1 ingroup %2
HAD12137
NYWarningCannot find type %1HAD12138
NYWarningResource Type %1 occurringmore than once in dependencyattribute for group %2
HAD12139
NYWarningGroup %1 has SystemZoneswithout a SystemList
HAD12140
NYWarningSystem %1 in the SystemZonesof group %2
HAD12141
NYWarningAttribute %1 for %2 cannot bespecified both local and global
HAD12142
NYWarningAttribute %1 for %2 specifiedlocal on %3 more than once
HAD12143
VCS Management Pack monitoring rulesHAD monitoring rules
28
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
NYWarningReserved word - %1 - cannot beused to name objects orattributes: %2
HAD12144
NYWarningSystemList does not have a listHAD12145
NYWarningGroup %1 has a local attribute%2 without SystemList
HAD12146
NYWarningLocal system not specified for%1 in group %2
HAD12148
NYWarningLocal system was specified fornon local attribute %1 in group%2
HAD12149
NYWarningDuplicate event item name %1%2
HAD12150
NYWarningDuplicate event name %1 %2HAD12151
NYWarningBad include line in file %1:%2HAD12155
NYWarningNo group definedHAD12156
NYWarningAutoStartList doesnothave a listHAD12158
NYWarningUnable to get list of types filesfrom VCS engine
HAD12159
NYWarningSingle slash not allowedHAD12160
NYWarningQuotes mismatchHAD12161
NYWarningUnexpected group dependencyHAD12162
NYWarningNo name given for clusterHAD12163
NYWarningNo name given for groupHAD12164
NYWarningNo name given for systemHAD12165
NYWarningNo name given for typeHAD12166
NYWarningCannot change file permissionsof %1
HAD12167
29VCS Management Pack monitoring rulesHAD monitoring rules
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
NYWarningCannot find HeartBeat %1HAD12168
NYWarningAttempting to add RemoteCluster %1. It is already theexisting local cluster
HAD12169
NYWarningAttempting to add Cluster%1. Itis already an existing remotecluster
HAD12170
NYWarningHeartbeat %1 is defined morethan once
HAD12171
NYWarningRemote Cluster %1 is definedmore than once
HAD12172
NYWarningRemoteClustername%1 is sameas the local cluster name
HAD12173
NYWarningNo name given for heartbeatHAD12174
NYWarningNo name given for RemoteCluster
HAD12175
NYWarningCluster%1defined inClusterListof Heartbeat %2 is not a remotecluster
HAD12177
NYWarningLocal Cluster name and value ofCluster attribute ClusterNamemust be the same
HAD12178
NYWarningMust specify name and IPaddress of Remote Cluster to beadded
HAD12180
NYWarningRemote Cluster Name missingHAD12181
NYWarning%1 is not an existing RemoteCluster
HAD12182
NYWarningCannot override attribute %1HAD12183
NYWarningClusterList of heartbeat%1doesnot have a list
HAD12184
VCS Management Pack monitoring rulesHAD monitoring rules
30
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
NYWarningHeartbeat %1 has a localattribute%2without ClusterList
HAD12185
NYWarningCluster %1 not on ClusterList ofheartbeat %2
HAD12186
NYWarningCluster%1defined inClusterListof Group %2 is not a local orremote cluster
HAD12187
NYWarningClusterList for group %1 doesnot have a list
HAD12188
NYWarningCluster-scope not specified forlocal attribute %1 in heartbeat%2
HAD12189
NYWarningCluster-scope was specified forglobal attribute %1 in heartbeat%2
HAD12190
NYWarningLine %1 of file %2 is not inUTF-8 format
HAD12191
NYWarningUndefined Type : %1 %2HAD12193
NYWarningMandatory attribute Missing :%1.%2
HAD12194
NYWarningConfiguration does not containa Heartbeat object
HAD12196
NYWarningGroup %1 has a local harddependencywith levelmore than1
HAD12197
NYWarningGroup %1 has multiple localhard parents
HAD12198
NYWarning%1 and %2 cannot have thesame ClusterAddress
HAD12199
NYWarningClusterAddress not defined for%1
HAD12200
NYWarningNo name given for resource : %1HAD12201
31VCS Management Pack monitoring rulesHAD monitoring rules
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
NYWarningDuplicate system name inSystemList of %1
HAD12202
NYWarningGroup ClusterService cannothave any parent group
HAD12203
NYWarningGroup ClusterService cannothave any child group
HAD12207
NYWarningGroup %1 :ClusterFailOverPolicy should beone of Manual
HAD12208
NYWarningGroup %1 : Authority should beeither 0 or 1
HAD12210
NYWarningIPM Receive ErrorHAD12211
NYWarningIPM Protocol ErrorHAD12212
NYWarningAttribute %1 for %2 specifiedmore than once
HAD12213
NYWarningIPM Send ErrorHAD12214
NYWarningInsufficient space in %1 fortemporary files
HAD12216
NYWarningFailed to open temporary filesHAD12217
NYWarningCould not create temporary filesin %1
HAD12218
NYWarningError encounteredwhilewritingtemporary files : %1
HAD12219
NYWarningCannot open file specified in theinclude statement: %1
HAD12221
NYWarningInvalid IP address assigned toClusterAddress of remote cluster%1
HAD12222
NYWarningGroup %1 depends on anon-existing group : %2
HAD12223
VCS Management Pack monitoring rulesHAD monitoring rules
32
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
NYWarningOfflining parent group %1 onsystem %2
HAD13310
NYErrorCannot find attribute(%1) in theresource type description
HAD13326
NYErrorCannot find attribute(%1) in theresource attribute list
HAD13327
NYWarningUnable to update attributeResourceInfo\n
HAD13332
NYWarningUsage errorHAD13338
NYWarningSystemnameshould be specifiedwith cluster
HAD13340
NYWarningIncorrect arguments to actionHAD13341
NYWarningNo overridden attributesHAD13342
NYWarningNo overridden attributes inresources
HAD13344
NYWarningNo overridden attributes inresources
HAD13345
NYWarningNo overridden attributes inresources
HAD13346
NYWarningNo overridden attributes in anyresource
HAD13347
NYWarningCannot specifytype/group/attribute/system asvalues for any of the options tothe display command.
HAD13350
NYWarningInvalid option: %1HAD13351
NYWarningUsage error: Value missing foroption %1
HAD13352
NYWarningError in converting the inputstring into UCS-2 encoding.Output may be truncated
HAD13357
33VCS Management Pack monitoring rulesHAD monitoring rules
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
NYWarningError in converting the inputstring into UTF-8 encoding.Output may be truncated
HAD13358
NYWarningResource %1 does not belong totypes(%2)\n
HAD13463
NYWarningResource %1 does not belong togroups(%2) \n
HAD13464
NYWarningResource %1 does not belong totypes(%2) or groups(%3) \n
HAD13465
NYWarningNo overridden attributes inresources %1 or no resource in(%2) belongs to type(s) %3\n
HAD13466
NYWarningNo overridden attributes inresources %1 or no resource in(%2 belongs to group(s) %3\n
HAD13467
NYWarningNo overridden attributes inresources %1 or no resource in(%2) belongs to type(s) %3 andgroup(s) %4
HAD13468
NYWarningNo overridden attributes inresources %1
HAD13469
NYErrorConfig file %1 does not exist.Forming a one node cluster
HAD14001
NYErrorNode config file %1 does notexist. Forming a onenode cluster
HAD14002
NYWarningNodeid is%1.Formingaonenodecluster and setting nodeid to 0
HAD14005
NYErrorUnsuccessful open of service%1HAD14007
NYWarningHeartbeat did not contain 6fields
HAD14016
NYWarningEjectmyself: Detectedmynodeidin membership %1
HAD14017
VCS Management Pack monitoring rulesHAD monitoring rules
34
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
NYErrorDeleting ipmhandle: Noheartbeats received fromnodeid%1on link%2current time=%3past time = %4
HAD14020
NYWarningioctl error while registering IPaddress %1
HAD14021
NYWarningFailed to execute process: %1.Errno is %2
HAD16007
NYWarningFailed to create process: %1.Errno is %2
HAD16008
NYWarningError in executing command:%1. Errno is %2
HAD16009
NYWarningNotifier:Expected SNMPmanagers machine name
HAD17001
NYWarningNotifier:Severity out of rangeHAD17002
NYWarningNotifier:Unexpected optionHAD17003
NYWarningNotifier:Expected SMTP servername
HAD17004
NYWarningNotifier:Expectedmail recipientsname
HAD17005
NYWarningNotifier:Expected SNMP and | orSMTP options
HAD17006
NYWarningNotifier:exit byNOTIFIER_DISCONNECT msg.Connected to %1
HAD17007
NY
Y
WarningNotifier:cannot connect toipmserver
HAD17009
NYWarningNotifier:cannot create threadHAD17010
NYWarningNotifier:cannot communicate toVCS
HAD17011
35VCS Management Pack monitoring rulesHAD monitoring rules
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
NYWarningNotifier:sendMSG_NOTIFIER_CONNECTfailure
HAD17012
NYWarningNotifier:IPM connection failedHAD17013
NYWarningNotifier:exit byNOTIFIER_DISCONNECT msg.Connected to unknown host
HAD17014
NYWarningNotifier:receive messagesunknown minor
HAD17015
NYWarningNotifier:sendMSG_NOTIFIER_ACK failed
HAD17016
NYWarningNotifier:receive unknownmessage from VCS
HAD17017
NYWarningNotifier:cannot create PDU forsnmp trap
HAD17018
NYWarningNotifier:cannot get local IPaddress
HAD17019
NYWarningNotifier:cannot create snmp trapOID
HAD17020
NYWarningNotifier:cannot allocatememoryfor %1
HAD17021
NYWarningNotifier:%1 undefinedHAD17022
NYWarningNotifier:%1 command failureHAD17023
NYWarningNotifier:wrong service grouptype
HAD17024
NYWarningNotifier:wrong heartbeat typeHAD17025
NYWarningNotifier:cannot open snmpsession to %1
HAD17026
NYWarningNotifier:cannot send snmp trapHAD17027
VCS Management Pack monitoring rulesHAD monitoring rules
36
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
NYWarningNotifier:cannot close snmpsession
HAD17028
NYWarningNotifier:unknown errorHAD17029
NYWarningNotifier:cannot verify recipient%1
HAD17030
NYWarningNotifier:activated signal %1HAD17031
NYWarningNotifier:sendMSG_NOTIFIER_DISCONNECTfailed
HAD17032
NYWarningNotifier:cannot get snmp trapsup time
HAD17033
NYWarningNotifier:SNMP error %1HAD17034
NYWarningNotifier:SNMP unknown errorHAD17035
NYWarningNotifier:SMTP error %1HAD17036
NYWarningNotifier:SMTP unknown errorHAD17037
NYWarningNotifier:value of option%1 is outof range
HAD17038
NYWarningNotifier:unknown trap IDHAD17039
NYWarningNotifier:unknown entities typeHAD17040
NYWarningNotifier:unknown entitiessubtype
HAD17041
NYWarningNotifier:options wrong order.Entity typemust bedefine beforeentity subtypes
HAD17042
NYWarningNotifier:sendMSG_NOTIFIER_NOTIFY failure
HAD17043
NYWarningNotifier:response toMSG_NOTIFIER_ALIVE failure
HAD17045
37VCS Management Pack monitoring rulesHAD monitoring rules
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
NYWarningNotifier:%1 command failure for%2
HAD17046
NYWarningNotifier:Setting message Queuesize to default value as valuespecified is less than default
HAD17047
NYWarningNotifier:Message %1 is beingdeleted sincemessage cannot bedelivered for more than a hour
HAD17049
NYWarningNotifier:Unhandled exceptionoccurred
HAD17050
NYWarningNotifier:Unable to connect to%1HAD17051
NYWarningNotifier:Mail server specifieddoes not support SMTP VRFYcommand. Email user cannot beverified
HAD17053
NYErrorULF_CLI | ULF_AGTHAD40000
NYWarningCannot connect toVCSsimulatorHAD40001
NYErrorPasswords do not matchHAD40002
NYErrorError: Nodeid(%1 should be lessthan maxnodes(%2 This nodecannot join the cluster
HAD40004
NYErrorError: Cannot Initialize SocketHAD40006
NYErrorError: Unsuccessful open ofservice
HAD40007
NYWarningUnable to specify -status fromthe command line. %1
HAD40009
NYErrorError: invalid type %cHAD40016
NYErrorPasswords do not match enteragain
HAD40024
NYWarningOn the FAULTED cluster %1HAD40103
VCS Management Pack monitoring rulesHAD monitoring rules
38
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
NYWarning%1 %2HAD40113
NYWarning%1 %2 %3HAD40114
NYWarningCannot specify both -localclusand -clus options
HAD40115
NYWarning-localclus should be the lastoption.
HAD40116
NYWarningNo records found matching thespecified conditions\n
HAD40125
NYErrorCould not copy the sampleconfiguration files
HAD49001
NYErrorCannot findVCS_SIMULATOR_HOME
HAD49002
NYErrorCannot gather Simulator portconfigurations for cluster %1
HAD49003
NYErrorPort specified is alreadyconfigured in this configuration.
HAD49004
NYErrorConfiguration files created butcould not update the simconfigfile.
HAD49007
NYErrorCannot find default simulatorconfiguration.
HAD49008
NYErrorDirectory for the specifiedcluster already exists. Cannotcontinue to configure.
HAD49009
NYErrorCannot write to file: %1HAD49015
NYErrorSimulator is already running onport ‘%1’ for cluster ‘%2’.
HAD49017
NYErrorCould not find port informationfor the cluster %1. Specifiedcluster may not be configured.
HAD49018
39VCS Management Pack monitoring rulesHAD monitoring rules
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
NYErrorCould not connect to the cluster%1. It may not be Running.
HAD49019
NYErrorCould not stop SimServer. Errorreported: %1
HAD49020
NYErrorCannot gather cluster nameinformation for port %1
HAD49021
NYWarningGroup %1’s prerequisites havenot been fullymet on system%2
HAD50000
NYWarningInitiating auto-start online ofgroup %1
HAD50007
NYErrorSetting SYSSTATE toRSM_EXITED for node : %1.
HAD50016
NYWarningprocess_cluster() - receivedMSG_CLUSTER_DIE_DUPLICATE_NAMEfrom node: %1. Will Exit now.
HAD50018
NYWarningThere are no enabled resourcesin the group %1 to online
HAD50036
NYErrorDisabled resource:%1 cannot beonlined
HAD50039
NYErrorAll the resources in group arenot completely offline
HAD50040
NYWarningFor system %1 LLTNodeId:%2and NodeId:%3 do not match
HAD50043
NYWarningFor system%1check if llttab filehas correct set-node entry withreference to the llthosts file. VCSengine will exit to prevent anyinconsistency
HAD50044
N
N
YWarningInitiating online of parent group%s
HAD50045
NYWarningInitiating online of parent group%1 on node %2
HAD50046
VCS Management Pack monitoring rulesHAD monitoring rules
40
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
NYWarningClearing parent group %1’smigrateq
HAD50047
NYWarningMigrating child %1 from node%2
HAD50048
NYWarningInitiating online of child group%1
HAD50049
NYWarningMigrating parent %s from node%1
HAD50050
NYWarningFailed to read GAB message %1time(s) due to insufficientmemory.
HAD50051
NYWarningInsufficientmemory to readGABmessage. Panic system.
HAD50052
NYWarningInsufficientmemory to readGABmessage. Exiting.
HAD50053
NYWarningCommand (%1) failed. ClusterAdministrator or GroupAdministrator privilege required
HAD50100
NYWarningCommand (%1) failed. ClusterAdministrator privilege required
HAD50101
NYWarningCommand (%1) failed. At leastCluster Operator privilegerequired
HAD50102
NYWarningCommand (%1) failed. At leastGroup Administrator privilegerequired
HAD50103
NYWarningCommand (%1) failed. At leastGroup Operator privilegerequired
HAD50104
NYWarningCommand (%1) failed. Usershould be a %2
HAD50105
NYWarninghacli is disabledHAD50112
41VCS Management Pack monitoring rulesHAD monitoring rules
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
NYWarningInvalid value %1 for key %2HAD50114
NYWarningInvalid value %1 for key %2HAD50115
NYWarningInvalid value %1 for key %2HAD50116
NYWarningInvalid value %1 for key %2 cannot modify key for this value
HAD50117
NYWarning%1 is not a valid key forCPUUsageMonitoring
HAD50118
NYErrorError in disabling CPUUsagemonitoring: %1
HAD50119
NYErrorError in enabling CPUUsagemonitoring: %1
HAD50120
NYErrorError in reading CPUUsage: %1HAD50121
NYErrorInvalid CPUUsage obtained: %1HAD50122
NYErrorCPUUsage: %1 exceededActionThreshold: %2 on system%3
HAD50123
NYWarningCPUUsage: %1 exceededNotifyThreshold: %2 on system%3
HAD50124
NYWarningGroup%1 is not yet fully probedon system %2
HAD50126
NYWarningUser %1HAD50132
NYWarningUser %1HAD50134
NYWarningSome resources are in ADMINWAIT state on system %1
HAD50138
NYWarningClearing themigrateq for parentgroup %1
HAD50141
NYErrorADMIN_WAIT flag set forresource %1 on system %2 withthe reason %3
HAD50148
VCS Management Pack monitoring rulesHAD monitoring rules
42
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
NYErrorUnsuccessful get of PDRs (%1)HAD50300
NYWarningUnsuccessful in getting PDattributes (%1)
HAD50301
NYErrorUnsuccessful search fornon-rootdomain.
HAD50302
NYErrorUnsuccessful creation of privatedomain inAuthenticationBrokerfor VCS Engine(%1) %2
HAD50303
NYErrorUnsuccessful in getting PrivateDomain attributes (%1)
HAD50304
NYErrorUnsuccessful creation ofPrincipal in AuthenticationBroker for VCS Engine(%1)
HAD50305
NYErrorFailed to initialize securecommunication library (%1)
HAD50307
NYErrorSecurity ON. Init failed. Clientswill be rejected
HAD50309
NYErrorUnable to get FQDNforhost (%1)HAD50312
NYErrorRemote cluster %1 cannot bedeleted as it is in the %2 state
HAD50505
NYErrorRemote cluster %1 cannot bedeleted as it is a part of theclusterlist for group %2
HAD50506
NYErrorRemote cluster %1 cannot bedeleted as it is a part of theclusterlist for heartbeat %2
HAD50507
NYErrorNumber of clusters in theClusterList attribute for group%1 is different between clusters%2 and %3
HAD50523
43VCS Management Pack monitoring rulesHAD monitoring rules
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
NYErrorCluster %1 does not exist in theClusterList attribute for group%2 in cluster %3
HAD50524
NYErrorGroup %1’s ClusterList priorityfor cluster %2 is differentbetween clusters %3 and %4
HAD50526
NYErrorClusterList values for globalgroup %1 differ between theclusters. Not attempting toonline group in local cluster
HAD50528
NYErrorRemote cluster%1doesnot existin the ClusterList attribute forgroup %2 in local cluster %3
HAD50529
NYErrorGroup %1’s ClusterList priorityfor cluster %2 is differentbetween local cluster %3 andremote cluster %4
HAD50530
NYErrorNumber of clusters in theClusterList attribute for group%1 is different between localcluster %2 and remote cluster%3
HAD50531
NYWarningSimulator switched local systemto %1
HAD50624
NYWarningSystem (%1) is already upHAD50625
NYErrorCannot bring system %1 upHAD50626
NYErrorCannot bring system %1 upHAD50627
NYWarningSystem %1 is the last runningnode in the cluster. Stop thecluster instead of powering offthis system
HAD50628
NYWarningRemote cluster nameneeds to bespecified.\n
HAD50702
VCS Management Pack monitoring rulesHAD monitoring rules
44
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
NYWarningIncorrect remote clusterspecified
HAD50704
NYWarningMust specify a system nameHAD50705
NYWarningIncorrect cluster specifiedHAD50706
NYWarningIncorrect optionHAD50710
NYWarningInsufficient argumentsHAD50711
NYWarningBad parameterHAD50712
NYWarningSpecify one remote clusterHAD50713
NYWarningPlease specify the heartbeat andattribute name.
HAD50714
NYWarningMust specify a system name oruse the -all option
HAD50717
NYWarningUnexpectedmessage0x%1whileprocessing alerts from engine
HAD50727
NYWarningInvalid alert ID specifiedHAD50728
NYWarningInvalid description specifiedHAD50729
NYWarningIncorrect category ID specifiedHAD50731
NYWarningNeed to specify a description ofwhy alert is being deleted
HAD50739
NYWarningClusterService group is notproperly configured on cluster%1
HAD50743
NYErrorRemote cluster%1doesnothaveAuthority for global group %2.Not attempting to online in localcluster
HAD50757
NYWarningNot initiating online of parentgroup %1 after child onlinebecause parent group is indeferred AutoStart
HAD50758
45VCS Management Pack monitoring rulesHAD monitoring rules
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
NYWarningNot initiating online of parentgroup%1after child online sincelocal cluster does not haveAuthority for parent group
HAD50759
NYWarningGroup %1 is unable to go onlineon any system in cluster %2
HAD50809
NYErrorCommand (%1) failed. At leastGroup Operator privilegerequired on remote cluster %2
HAD50824
NYWarningUnable to display alerts. Anerrorhas occurred while requestingalerts from engine
HAD50850
NYWarningAn error has occurred whilereceiving alerts from engine
HAD50851
NYErrorError opening LDF file for ‘%1’HAD50878
NYErrorInvalid log messageHAD50879
NYErrorCommand (%1) failed.TheGroup%2 cannot be frozen
HAD50894
NYWarningRemote cluster %1 wasdetermined to be the nextsuitable failover target for group%2. Not initiating online ofgroup
HAD50895
NYErrorRemote cluster %1 has faulted.Determining if global group %2should be failed over to localcluster
HAD50908
NYErrorUnable to find a suitable remotefailover target for Group %1.
HAD50909
NYErrorLocal cluster was determined tobe the next suitable failovertarget for Group %1. Initiatingonline of group
HAD50910
VCS Management Pack monitoring rulesHAD monitoring rules
46
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
NYWarningUnable to fail over global group%1 in local cluster. Attemptingto fail group over to a remotecluster [ClusterFailoverPolicy =%2]
HAD50911
NYErrorCONCURRENCYVIOLATION:Group %1 is onlineon the following clusters [%2]
HAD50921
NYWarningInvalid group %1 specifiedHAD50922
NYWarningLocal cluster was not grantedAuthority for group %1
HAD50926
NYWarningReceived invalid message 0x%1HAD50927
NYWarningGroup%1 could not go online onremote system%2.Not initiatingoffline of group
HAD50931
NYWarningGroup %1 could not go online inremote cluster%2.Not initiatingoffline of group
HAD50932
NYWarningUnable to AutoStartHAD50934
NYWarningInvalid remote group message0x%1
HAD50952
NYWarningRemote group name is requiredHAD50953
NYWarningCould not find cluster %1HAD50954
NYWarningRemote group %1 does not existin cluster %2
HAD50955
NYErrorGlobal group %1 is faulted onsystem %2 in cluster %3
HAD50961
NYErrorAutoFailOver value for group%1is different between local cluster%2 and remote cluster %3
HAD50965
47VCS Management Pack monitoring rulesHAD monitoring rules
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
NYErrorClusterFailOverPolicy value forgroup %1 is different betweenlocal cluster %2 and remotecluster %3
HAD50966
NYWarningInvalid remote resourcemessage0x%1
HAD50972
NYWarningRemote resource name isrequired
HAD50973
NYWarningRemote type name is requiredHAD50974
NYWarningCould not find group %1 oncluster %2
HAD50977
NYWarningRemote resource %1 does notexist in cluster %2
HAD50978
NYError[Licensing] You have %1 day(s)left in your %2 featureevaluation period
HAD50979
NYError[Licensing] Your evaluationperiod for the %1 feature hasexpired. This feature will not beenabled thenext timeVCS starts
HAD50980
NYErrorResource%1 is faultedonsystem%2 in cluster %3
HAD50981
NYWarningInvalid remote system message0x%1
HAD50984
NYWarningRemote systemname is requiredHAD50985
NYWarningRemote system%1doesnot existin cluster %2
HAD50987
NYErrorSystem%1has faulted in cluster%2
HAD50992
VCS Management Pack monitoring rulesHAD monitoring rules
48
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
NYWarningLocal cluster has Authority forgroup %1 but is unable tocommunicate with other remoteclusters. Postponing AutoStartfor %2 seconds
HAD50993
NYWarningLocal cluster does not haveAuthority for group %1. Notinitiating AutoStart of group onsystem %2 after probe
HAD50994
NYWarningofflining (path) group %1 on %2HAD51000
NYWarningMigrating child %1 from node%2 to %3
HAD51001
NYErrorInvalid Timeout message 0x%1HAD51004
NYErrorTimeout with ID = %1 alreadyexists
HAD51005
NYErrorInvalid Timeout type 0x%1HAD51006
NYErrorTimeout with ID = %1 does notexist
HAD51007
NYWarningUnknown Axis flag 0x%1HAD51008
NYWarningCluster %1 does not existHAD51018
NYWarningGlobal group %1 is faulted dueto a persistent resource fault.Not settingRestart because localcluster does not have Authorityfor group
HAD51027
NYWarningUnable to grant Authority tocluster %1 since local cluster nolonger has Authority for group%2
HAD51040
NYWarningUnable to grant cluster %1Authority for group %2 sincegroup is online/partial in localcluster
HAD51041
49VCS Management Pack monitoring rulesHAD monitoring rules
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
NYWarningUnable to grant cluster %1Authority for group %2 sincegroup is in themiddle of a groupoperation
HAD51043
NYWarningUnable to grant cluster %1Authority for group %2 sincechild group %3 is in the middleof a group operation
HAD51045
NYWarningCannot switch global group %1.Cluster %2 is unable to locateAuthority for group
HAD51050
NYErrorVCS engine rejected connectionrequest from wide areaconnector because group %1 isnot properly configured
HAD51060
NYErrorVCS engine rejected connectionrequest from wide areaconnector because group %1 isnot running on local system %2
HAD51061
NYErrorVCS engine rejected connectionrequest from wide areaconnector because a connectionwith thewide area connector hasalready been established
HAD51062
NYWarningLinkHandle::events select failederrno=%1
HAD52501
NYErrorLinkHandle::open Cannot findusable Winsock.dll or correctversion of Winsock.dll
HAD52502
NYWarningLinkHandle::open Cannot findprotocol information for TCP
HAD52503
NYWarningLinkHandle::opengethostbyname failed for %1
HAD52504
VCS Management Pack monitoring rulesHAD monitoring rules
50
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
NYWarningLinkHandle::openUnrecognizableAddress Format%1
HAD52505
NYErrorLinkHandle::openCannot createsocket. errno = %1
HAD52506
NYWarningLinkHandle::open setting closeon exec failed errno = %1
HAD52508
NYWarningLinkHandle::open select failederrno = %1
HAD52509
NYWarningLinkHandle::open set tononblocking mode failed errno= %1
HAD52510
NYWarningLinkHandle::open Cannot findservice information for%1errno= %2/tcp
HAD52511
NYWarningLinkHandle::open getpeernamefailed errno = %1
HAD
HAD
52512
NYWarningLinkHandle::openfcntl(FD_CLOEXEC) failed errno= %1
HAD52513
NYWarningLinkHandle::send peer exitederrno = %1
HAD52514
NYWarningLinkHandle::send peer closedHAD52515
NYWarningLinkHandle:recvb _read_errno is%1
HAD52516
NYWarningLinkHandle::recv peer exitederrno=%1
HAD52517
NYWarningLinkHandle::sendrecvb send() !=IPM_SUCCESS
HAD52518
NYWarningLinkHandle::sendrecvb recvb()!= IPM_SUCCESS
HAD52519
51VCS Management Pack monitoring rulesHAD monitoring rules
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
NYErrorLinkHandle::sendrecvbUnexpected message
HAD52520
NYWarningInvalid ChannelHAD52521
NYWarningLinkServer::open Cannot findservice information for %1/tcp
HAD52522
NYWarningLinkServer::open Cannot findprotocol information for TCP
HAD52523
NYErrorLinkServer::open Cannot createsocket errno = %1
HAD52524
NYWarningLinkServer::openSO_REUSEADDR failed errno =%1
HAD52525
NYWarningLinkServer::open Bind Failederrno = %1
HAD52526
NYWarningLinkServer::open Listen Failederrno = %1
HAD52527
NYWarningLinkServer::accept failed errno= %1
HAD52528
NYWarningLogin IncorrectHAD52529
NYWarningCluster is not in RUNNING stateHAD52564
NYWarningBad cmd specifiedHAD52565
NYWarningBad system specifiedHAD52566
NYErrorCommand (%1) can not be runon a remote system
HAD52573
NYErrorSSL handshake failed %1HAD53000
NYErrorBroker (%1) unable toauthenticate logged on user (%2
HAD53005
NYErrorUnable to connect toVCS enginesecurely
HAD53006
VCS Management Pack monitoring rulesHAD monitoring rules
52
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
NYErrorError returned fromengine:HADon this node not acceptingclients.
HAD53007
NYErrorFailed to initialize securitylibrary (%1)
HAD53009
NYErrorAgent (%1) is exiting due tointernal error.
vcsagfw.dll13005
NYErrorCannot open stdin .. exitingVCSAgTestClient13133
NYErrorError receiving from the agent.Exiting
VCSAgTestClient13134
NYErrorError sending to the agent.Exiting
VCSAgTestClient13135
NYErrorCould not connect to port %1IPM error(%2)
VCSAgTestClient13136
NYWarningCould not get port number forthe service %1. Will try port %2
VCSAgTestServer13137
YYErrorCould open IPM server on port%1. Exiting
VCSAgTestServer13138
NYWarningInvalid status message receivedfor Resource(%1
VCSAgTestServer13353
YYErrorError: Cannot find usableWinsock.dll or correct version ofWinsock.dll
VCSAgTestServer13355
YYErrorThe following commands aresupported:\n (Use‘help<command>' for moreinformation on using<command> \n )
VCSAgTestServer13372
YYErrorCannot understand input -- typehelp for list of commands
VCSAgTestServer13375
YYErrorAgent %1 has either not startedor has not connected
VCSAgTestServer13379
53VCS Management Pack monitoring rulesHAD monitoring rules
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
YYErrorUnknown agent (%1) is trying toconnect
VCSAgTestServer13381
YYErrorAgentid (%1) already exists --cannot start two agents with thesame id
VCSAgTestServer13382
YYErrorError(%1) opening (%2)VCSAgTestServer13383
YYErrorCannot execute %1VCSAgTestServer13384
YYErrorSends a message to an agent toonline a resource
VCSAgTestServer13386
YYErrorSends a message to an agent toadd a resource
VCSAgTestServer13387
YYErrorSends a message to an agent todetermine the status of aresource
VCSAgTestServer13388
YYErrorSends a message to an agent todelete a resource
VCSAgTestServer13389
YYErrorSends message to an agent tooffline a resource
VCSAgTestServer13390
YYErrorStarts an agent and assigns it aname
VCSAgTestServer13391
YYErrorThe default value of is
$VCS_HOME\\bin\\VCSAgDriver.exe
VCSAgTestServer13392
YYErrorThe default value of <filename>is$VCS_HOME/bin/<agentid>/<agentid>Agent
VCSAgTestServer13393
YYErrorSubsequent commands to thisagentmust specify <agentid> asthe first arg
VCSAgTestServer13394
YYErrorsends a shutdownmessage to theagent specified by the <agentid>
VCSAgTestServer13395
VCS Management Pack monitoring rulesHAD monitoring rules
54
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
YYErrorDeletes an agent entry from thelist of agents started by thisprocess.
VCSAgTestServer13396
YYErrorPrints the ids of all the agentsstarted by this process
VCSAgTestServer13397
YYErrorSends a message to the agent<agentid> to\n - either list all thehash tables\n - or display aparticular hash table.
VCSAgTestServer13398
YYErrorSends a message to an agent todisplay the memory statistics ofthe\n internal C++ objects.
VCSAgTestServer13399
YYErrorSends a message to an agent toshow its CPU usage statistics
VCSAgTestServer13400
YYErrorSends a message to an agent toadd a resource type
VCSAgTestServer13401
YYErrorSends a message to an agent toadd an attribute to a resourcetype
VCSAgTestServer13402
YYErrorSends a message to an agent toadd an attribute to all theresources\n of a resource type
VCSAgTestServer13403
YYErrorSends a message to an agent tomodify an attribute of a resourcetype
VCSAgTestServer13404
YYErrorSends a message to an agent tomodify an attribute of a resource
VCSAgTestServer13405
YYErrorQuits this program. All theagents started by this processmust be \n stopped before thiscommand can be issued
VCSAgTestServer13406
YYErrorCannot quit: Please stop allAgents before quitting
VCSAgTestServer13408
55VCS Management Pack monitoring rulesHAD monitoring rules
Table 3-1 HAD Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleName
EventID
YYErrorUnknown command (%1) . Typehelp for the list of commands
VCSAgTestServer13409
YYErrorAgentid has not been specifiedVCSAgTestServer13410
YYErrorReceived theMSG_CLUSTER_CONN_INFOmessage with non string key
VCSAgTestServer13411
YYErrorNo value specified for key (%1)VCSAgTestServer13412
YYErrorValue of key %1 should be astring
VCSAgTestServer13413
YYErrorValue of key %1 should be aninteger
VCSAgTestServer13414
YYErrorPlease verify the argumentsVCSAgTestServer13420
GAB monitoring rulesTable 3-2 lists the GAB rules included in the VCS Management Pack.
Table 3-2 GAB Monitoring Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NYInformationalEvent loggingenabledfor GAB driver.
GAB1
YYErrorError in creati ngDevice Object in NTGab Driver.
GAB2
YYErrorA device w hich doesnot exist wasspecified.
GAB3
YYErrorThe I/O request wascancelled.
GAB4
VCS Management Pack monitoring rulesGAB monitoring rules
56
Table 3-2 GAB Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
YYErrorInsufficient systemresources exist tocomplete the request.
GAB5
YYErrorNot enough memoryresources to completethe request.
GAB6
YYErrorThe access right tothe requested objecthas not been granted.
GAB7
YYErrorThe device for therequest is currentlybusy.
GAB8
YYErrorThe Object Nam ealready exists.
GAB9
YYErrorAn invalid parameterwas passed to afunction.
GAB10
YYErrorA protocol error wasdetected.
GAB11
YYErrorThe I/O devicereported an I/O error.
GAB12
YYErrorThe specifiedresources name cannot be found.
GAB13
YYErrorDriver report error on%2
GAB14
YYErrorDriver report %2GAB15
57VCS Management Pack monitoring rulesGAB monitoring rules
Table 3-2 GAB Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NYErrorGAB: Driverinformationdisplayedin data field below.Use Byte modedisplay and scrollpassed first 20 hexbytes starting atoffset 28 hex.
GAB18
LLT monitoring rulesTable 3-3 lists the LTT rules included in the VCS Management Pack.
Table 3-3 LLT Monitoring Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
YYErrorInternal Error: Incorrectheader size %2
LLT3
YYErrorInternal Error: Failed tocreate LLT device"
LLT4
YYErrorInternal error: Failed tocreate symbolic link
LLT5
YYErrorMemory allocation error%2
LLT6
YYErrorFailed to close the LLTlink %2
LLT7
YYErrorProtocol error:Acknowledgement inwindow but no messagesto zap %2
LLT8
YYErrorDuplicate cluster/nodedetected %2
LLT9
YYErrorLink disabled %2LLT10
VCS Management Pack monitoring rulesLLT monitoring rules
58
Table 3-3 LLT Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
YYErrorLLT is disabledLLT11
YYErrorTimer was not called forquite sometime %2
LLT12
Agents monitoring rulesThe Agent Framework rules for each agent categorized appropriately underproperly named sub-folders.
VMDg event processing rulesTable 3-4 lists the VMDg agent rules included in the VCS Management Pack.
Table 3-4 VMDg Event Processing Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NYWarningFailed to queryVxOb (Error= %d:%d).
VMDg9551
NYWarningFailed to startVxObService(Error = %d:%d).
VMDg9550
NYWarningFailed to open VxOb (Error= %d:%d).
VMDg9552
NYWarningFailed to unmount volumeVMDg9558
NYErrorVolume Manager Clustersupport components notinstalled.
VMDg9510
NYErrorCould not initialize VolumeManager connection. Error= %08X
VMDg9507
NYErrorCould not get SCM handle[%d:%d]
VMDg9509
59VCS Management Pack monitoring rulesAgents monitoring rules
Table 3-4 VMDg Event Processing Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NYErrorCluster Server license is notenabled in VolumeManager.
VMDg9505
NYErrorDiskgroup not configuredVMDg9506
NYWarningQuery imported clusterdiskgroups : %s
VMDg9559
NYErrorInit diskgroup : %sVMDg9515
NYErrorInit diskgroup failed : Thediskgroup and GUID do notmatch
VMDg9615
NYErrorInit diskgroup failed[%d:%d]
VMDg9715
NYWarningQuery imported clusterdiskgroup state: %s
VMDg9553
NYWarningQuery SCSI Reservation :%s
VMDg9561
NYWarningOne or more disks in thisdiskgroup are unsteady.
VMDg9562
NYErrorOnline diskgroup : %sVMDg9513
NYWarningForce Import of diskgroupenabled.
VMDg9563
NYWarningDisk availability check : %sVMDg9566
NYErrorOnlinediskgroup. Less thanhalf of total disks availablein the diskgroup.
VMDg9511
NYErrorImport diskgroup failed[%d:%d]
VMDg9613
NYErrorOffline diskgroup : %sVMDg9514
NYErrorDeport diskgroup failed[%d:%d]
VMDg9614
VCS Management Pack monitoring rulesAgents monitoring rules
60
MountV agent event processing rulesTable 3-5 lists the MountV agent rules included in the VCS Management Pack.
Table 3-5 MountV Agent Event Processing Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NYErrorVolume Manager Clustersupport components notinstalled.
MountV9001
NYErrorCould not initializeVolume Managerconnection. Error=%08X
MountV9002
NYErrorCluster Server license isnot enabled in VolumeManager
MountV9005
NYError%s not configuredMountV9006
NYWarningMount type unknown(%d:%d:%s)
MountV9007
NYWarningFailed to get volumeproperties [%d:%d]
MountV9008
NYWarningVolume %s is alsomounted as NTFS Foldermount(s) at %s
MountV9011
NYErrorCannot access volume%sMountV9010
NYWarningVolume%s isMounted as%s but configured as %s
MountV9012
NYWarningVolume %s is alreadymounted as NTFS Folder%s
MountV9013
NYWarningVolume %s has beenmounted multiple times(%s)
MountV9015
NYWarningVolume %s has also beenmounted as (%s)
MountV9016
61VCS Management Pack monitoring rulesAgents monitoring rules
Table 3-5 MountV Agent Event Processing Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NYWarningVolume %s is alsomounted as Driveletter%s
MountV9009
NYWarningDiskgroup not presentMountV9017
NYWarningVolume not presentMountV9018
NYWarningConnection to VM notinitialized
MountV9019
NYWarningVolume %s is alreadymounted as Driveletter%s
MountV9014
NYWarning%s is not suitable forfolder mount [%d:%d]
MountV9020
NYWarning%s is not on an NTFSformatted volume
MountV9021
NYWarningFailed to unlock volume[%d:%d]
MountV9022
NYWarningFailed to lock volume[%d:%d]
MountV9023
NYWarningUnable to open volume[%d:%d]
MountV9031
NYErrorFailed to mount volume%s at %s [%d:%d]
MountV9024
NYErrorFailed to unmount thevolume from theconfigured mount path[%d:%d]
MountV9025
NYErrorFilesystem at %s is notclean [%d:%d]
MountV9026
NYErrorFailed to addadministrative share
MountV9027
VCS Management Pack monitoring rulesAgents monitoring rules
62
Table 3-5 MountV Agent Event Processing Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NYErrorFailed to deleteadministrative share[%d:%d]
MountV9030
ElifNone agent event processing rulesTable 3-6 lists the ElifNone agent rules included in the VCS Management Pack.
Table 3-6 ElifNone Agent Event Processing Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NYErrorFile Name is notvalid
Agents2
FileNone agent event processing rulesTable 3-7 lists the FileNone agent rules included in the VCS Management Pack.
Table 3-7 FileNone Agent Event Processing Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NYErrorFile Name is notspecified
Agents502
FileOnOff agent event processing rulesTable 3-8 lists the FileOnOff agent rules included in the VCS Management Pack.
Table 3-8 FileOnOffAgent Event Processing Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NYErrorUnable to create the fileAgents1002
NNErrorUnable to delete the fileAgents1003
63VCS Management Pack monitoring rulesAgents monitoring rules
FileOnOnly agent event processing rulesTable 3-9 lists the FileOnOnly agent rules included in the VCSManagement Pack.
Table 3-9 FileOnOnly Agent Event Processing Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NYErrorERROR! FileName is notvalid
Agents1502
NYErrorUnable to create the fileAgents1504
FileShare agent event processing rulesTable 3-10 lists the FileShare agent rules included in the VCS Management Pack.
Table 3-10 FileShare Agent Event Processing Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NYErrorAttributevalue(s) invalidfor %s
FileShare10501
NYErrorSharename%s containsinvalid characters
FileShare10701
NYErrorFailed to initialize folder%s [%d:%d]
FileShare10502
NYErrorFailed to initializepermissions. [%d:%d]
FileShare10503
NYErrorFailed to attachpermissions. [%d:%d]
FileShare10504
NYErrorPathmismatch for share%s
FileShare10520
NYErrorMaxUsers for share %sis less than configured
FileShare10510
NYErrorFileShare Error : TheServer service is notavailable
FileShare10522
VCS Management Pack monitoring rulesAgents monitoring rules
64
Table 3-10 FileShare Agent Event Processing Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NYErrorThe share %s is of typePrint
FileShare10523
NYErrorThe share %s is of typeDevice
FileShare10524
NYErrorThe share %s is of typeIPC
FileShare10525
NYErrorThe share %s is of typeSpecial
FileShare10526
NYErrorThe share %s is of typeUnknown
FileShare10527
NYErrorUnknown error forfolder %s [%d:%d]
FileShare10506
NYErrorSystem error occurredfor folder %s Error [%d]
FileShare10521
NYErrorPermissions erroroccurred for folder %sError [%d]
FileShare10529
NYErrorFailed to get propertiesfor folder %s [%d:%d]
FileShare10507
NYErrorFailed to open folder %s[%d:%d]
FileShare10505
NYErrorThe folder %s may notbe shared by VCS
FileShare10528
NYErrorFolder %s (\\\\%s\\%s)already shared
FileShare10508
NYErrorFailed to share folder%sas (\\\\%s\\%s) [%d:%d]
FileShare10509
NYErrorFailed to unshare folder%s as (\\\\%s\\%s)[%d:%d]
FileShare10519
65VCS Management Pack monitoring rulesAgents monitoring rules
Internet Information Services (IIS) agent event processing rulesTable 3-11 lists the IIS agent rules included in the VCS Management Pack.
Table 3-11 Internet Information Services Agent Event Processing Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NYWarningFailed to parse the argumentlist.
Agents13503
NYErrorFailed to allocatememory forIIS Service resource object.
Agents13505
NYError”Failed to find the serviceobject. Please check the\SiteType\”” attribute.(%s)”””
Agents13504
NYError”Failed to initialize IIS siteobject. [%d
Agents13506
NYError”Failed to create a newobjectfor (%s) service [%d
Agents13507
NYError”Arguments arenot specifiedcorrectly
Agents13556
NYErrorFailed to convert resourcename. Error %d
Agents13557
NYErrorFailed to convert theargument list. Error %d.
Agents13558
NYError”Configuration error.\Service\”” attribute is notconfigured.”””
Agents13559
NYError”Configuration error.\SiteName\”” attribute is notconfigured.”””
Agents13560
NYError”Configuration error.\IPResName\”” attribute isnot configured.”””
Agents13561
NYErrorInternal error IP (%s) Failedto convert IP address toASCII. Error Code: %d
Agents13562
VCS Management Pack monitoring rulesAgents monitoring rules
66
Table 3-11 Internet Information Services Agent Event Processing Rules(continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NYErrorIncorrect IP address (%s)Agents13563
NYError”Failed to start theapplication pool (%s). [%d
Agents13547
NYError”Failed to stop theapplication pool (%s). [%d
Agents13548
NYError”Failed to get the applicationpool state (%s). [%d
Agents13549
NYError”Failed to get the containerinterface %s [%d
Agents13524
NYError”Failed to enumerate theobject in container %s [%d
Agents13525
NYError”Failed to enumerate thenextobject in the container %s[%d
Agents13567
NYError”Failed to query interface%s[%d
Agents13526
NYError”Failed to get the applicationpool state. Please check theapplication pool name %s[%d
Agents13550
NYError”Failed to get the IIS webvirtual directory object %s[%d
Agents13551
NYError”Failed to start the one ormore application pools. [%d
Agents13552
NYError”Failed to start the defaultapplication pool (%s). [%d
Agents13568
NYError”Failed to get the applicationpool interface %s [%d
Agents13553
NYError”Failed to start theapplication pool %s [%d
Agents13554
67VCS Management Pack monitoring rulesAgents monitoring rules
Table 3-11 Internet Information Services Agent Event Processing Rules(continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NYError”Failed to stop theapplication pool %s [%d
Agents13555
NYError”Failed to start the service(%s). [%d
Agents13508
NYError”Failed to start the IIS Site /Virtual Server (%s). [%d
Agents13509
NYError”Failed to initializeapplication pool object (%s).[%d
Agents13510
NYErrorFailed to get the service state(%s)
Agents13512
NYError”Failed to stop the IIS Site /Virtual Server (%s). [%d
Agents13514
NYError”Failed todetermine the stateof the site / virtual server(%s). [%d
Agents13516
NYError”Failed to get the applicationpool state andbindpath(%s).[%d
Agents13517
NYErrorCLEAN () Site Is running (%s).Agents25
NYError”Failed to get the IIS version[%d
Agents13518
NYError”Failed to get the serviceoperations interface %s [%d
Agents13519
NYError”Failed to get the status ofthe site %s [%d
Agents13520
NYError”Failed to start the site %s[%d
Agents13522
NYError”Failed to stop the site %s[%d
Agents13523
VCS Management Pack monitoring rulesAgents monitoring rules
68
Table 3-11 Internet Information Services Agent Event Processing Rules(continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NYError”Failed to get the object name%s [%d
Agents13527
NYError”Failed to get theServerComment %s [%d
Agents13528
NYError”Failed to get the ADsPath%s [%d
Agents13529
NYError”Failed to release the siteenumerate %s [%d
Agents13530
NYError”Failed to get the registry%s\CurrentMode\”” attributevalue [%d”
Agents13531
NYErrorFailed to find a usableWinSock DLL return value%d error code [%d]
Agents13533
NYErrorUnsupported WinSock DLLversion HIGHBYTE (%d)LOBYTE (%d )
Agents13534
NYErrorSocket call failedPortNumber (%ld) error (%ld)
Agents13511
NYErrorFailed to set the socket optionSO_DONTLINGERPortNumber (%ld) error (%ld)
Agents13535
NYErrorFailed to set the socket optionSO_REUSEADDRPortNumber (%ld) error (%ld)
Agents13536
NYErrorFailed to set the socket optionSO_KEEPALIVEPortNumber(%ld) error (%ld)
Agents13537
NYErrorFailed to set the I/O mode ofa socket FIONBIOPortNumber (%ld) error (%ld)
Agents13538
69VCS Management Pack monitoring rulesAgents monitoring rules
Table 3-11 Internet Information Services Agent Event Processing Rules(continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NYErrorFailed to establish aconnectionwith the specifiedsocket PortNumber (%ld)error (%ld)
Agents13539
NYErrorFailed to receive data from aconnected socket error (%ld)
Agents13540
NYErrorFailed to receive data from aconnected socket timeout(%ld)
Agents13541
NYErrorFailed to determine thestatus of the socket error(%ld)
Agents13542
NYErrorFailed to create a IIS adminbase object (%ld) error (%ld)
Agents13543
NYErrorFailed to open metabase key%s (%ld) error (%ld)
Agents13544
NYErrorFailed to enumerate theparent key (%s) subkey(%s)status (%ld) error (%ld)
Agents13545
NYErrorFailed to find a index in themetabase for key(%s) (%ld)error (%ld)
Agents13546
NYError”Wait on critical sectionfailed [%d
Agents12
NYError”Failed to start service (%s)[%d
Agents40
NYWarningFailed to get the state of theservice (%s)
Agents13
NYError”Failed to stop the service(%s) [%d
Agents41
NYError”Failed to terminate theservice (%s) [%d
Agents42
VCS Management Pack monitoring rulesAgents monitoring rules
70
Table 3-11 Internet Information Services Agent Event Processing Rules(continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NYError”Failed to initialize theservice object (Service = %s)[%d
Agents43
NYErrorFailed to get the servicestatus (Service =%s). Error =%d
Agents44
NYError”Failed to open the serviceobject (Service = %s). [%d
Agents45
GenericService event processing rulesTable 3-12 lists the GenericService agent rules included in the VCS ManagementPack.
Table 3-12 GenericService Event Processing Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYErrorFailed to convert theargument list. Error = %d.
GenericService6001
NYErrorThe ServiceName attributehas not been configured.
GenericService6002
NYErrorThe LanmanResNameattribute has not beenconfigured.
GenericService6026
NYErrorThe password attribute hasnot been configured.
GenericService6003
NYErrorFailed to lookup the accountname ‘%s’. Error = %d.
GenericService6005
NYWarningThe service ‘%s’ is not instopped state.
GenericService6007
NYErrorFailed to decrypt thepassword.
GenericService6008
71VCS Management Pack monitoring rulesAgents monitoring rules
Table 3-12 GenericService Event Processing Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYErrorFailed to change the usercontext of the service ‘%s’ to‘%s\\%s’. Error = %d.
GenericService6009
NYErrorFailed to set the virtualcomputer name in theenvironment of the service‘%s’. Error = %d.
GenericService6027
NYErrorFailed to start the service‘%s’. Error = %d.
GenericService6010
NYErrorThe service ‘%s’ did not startwithin the specified timelimit.
GenericService6011
NYErrorFailed to wait for the service‘%s’ to start. Error = %d.
GenericService6012
NYErrorFailed to get the user contextof the running service ‘%s’.Error = %d.
GenericService6013
NYErrorFailed to get the SID for user‘%s\\%s’.
GenericService6014
NYWarningThe service ‘%s’ is notrunning under the context ofuser ‘%s\\%s’.
GenericService6015
NYWarningThe ‘%s’ service is inSTARTED state but is notrunning under the context ofVirtual Server ‘%s’
GenericService6028
NYWarningFailed to remove the virtualname environment for theservice ‘%s’ Error : (%d:%d)
GenericService6029
NYWarningThe service ‘%s’ shares thesame process with otherservices. Killing it mightaffect those services.
GenericService6017
VCS Management Pack monitoring rulesAgents monitoring rules
72
Table 3-12 GenericService Event Processing Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYErrorFailed to kill the process ofservice ‘%s’. Error = %d.
GenericService6018
NYErrorFailed to open the service‘%s’. Error %d.
GenericService6021
NYErrorFailed to query the status ofthe service ‘%s’. Error = %d.
GenericService6022
NYWarningThe service ‘%s’ is not inrunning state. Attempt tostop itmight be unsuccessful.
GenericService6023
NYErrorThe service ‘%s’ did not stop.Error = %d.
GenericService6024
NYWarningThe service ‘%s’ did not stopwithin the specified timeout.Error = %d.
GenericService6025
Microsoft Virtual Machine (MSVirtualMachine) agent event processingrules
Table 3-13 lists the MSVirtualMachine agent rules included in the VCSManagement Pack.
Table 3-13 Microsoft Virtual Machine Agent Event Processing Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
YErrorFailed to get Argument list.14001
YErrorVirtual Server COM interfacecould not be initialized.Reported Error : [%01X]
14002
YErrorGetVMQuery failed for VM%s.Reported Error : [%01X]
14003
YErrorCOM Object pointer is NULLeven after GetVM() Querysucceeded for VM %s.
14004
73VCS Management Pack monitoring rulesAgents monitoring rules
Table 3-13 Microsoft Virtual Machine Agent Event Processing Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
YErrorFailed to retrieve state for VM%s. Reported Error [%01X].
14005
YErrorInvalid VM state was reportedforVM%s.Reported state [%d].
14006
YErrorMonitorHB failed. Could notcreate instance for theGuestOSfor VM %s. Reported Error[%01X].
14007
YErrorMonitorHB failed. Could notcommunicate with Virtualmachine Additions for VM %s.Reported Error [%01X].
14008
YErrorVM %s has stoppedheartbeating.
14009
YErrorPower on for VM %s failed.Reported Error : [%01X]
14012
YWarningCould not get a handle for theGuest OS running in VM %s.
14014
YWarningOS Shutdown failed for VM%s.Reported Error : [%01X].
14013
YWarningFailed to poweroff the Virtualmachine %s. Reported Error :[%01X].
14010
YWarningVirtual machine %s is alreadystopped.
14011
PrintShare agent event processing rulesTable 3-14 lists thePrintShare agent rules included in theVCSManagementPack.
VCS Management Pack monitoring rulesAgents monitoring rules
74
Table 3-14 PrintShare Agent Event Processing Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NYErrorAttribute value(s) invalid for%s
PrintShare11001
NYErrorShare name %s containsinvalid characters
PrintShare11201
NYErrorInitializing printer%s on%sfailed. [%d:%d]
PrintShare11002
NYErrorPrinter mismatch for share%s
PrintShare11020
NYErrorPrintShareError :TheServerservice is not available
PrintShare11022
NYErrorThe share %s is of typeFolder
PrintShare11023
NYErrorThe share %s is of typeDevice
PrintShare11024
NYErrorThe share %s is of type IPCPrintShare11025
NYErrorThe share %s is of typeSpecial
PrintShare11026
NYErrorThe share %s is of typeUnknown
PrintShare11027
NYErrorUnknown error for printer(\\\\%s\\%s). [%d:%d]
PrintShare11006
NYErrorSystem error occurred forprinter %s Error [%d]
PrintShare11021
NYErrorFailed to get properties forprinter (\\\\%s\\%s).[%d:%d]
PrintShare11007
NYErrorFailed to open printer %s[%d:%d]
PrintShare11029
NYErrorPrinter %s (\\\\%s\\%s)already shared
PrintShare11008
75VCS Management Pack monitoring rulesAgents monitoring rules
Table 3-14 PrintShare Agent Event Processing Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NYErrorFailed to share printer%s as(\\\\%s\\%s) [%d:%d]
PrintShare11009
NYErrorThe printer %s may not beshared by VCS
PrintShare11028
NYErrorFailed to unshare printer%sas (\\\\%s\\%s) [%d:%d]
PrintShare11019
PrintSpool agent event processing rulesTable 3-15 lists the PrintSpool agent rules included in theVCSManagement Pack.
Table 3-15 PrintSpool Agent Event Processing Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NYErrorFailed to convert theargument list. Error = %d.
PrintSpool7001
NYErrorLanmanResNameattributehas not been configured.
PrintSpool7002
NYErrorIPResName attribute hasnot been configured.
PrintSpool7003
NYErrorMountResName attributehas not been configured.
PrintSpool7004
NYErrorSpoolDirectory attributehas not been configured.
PrintSpool7005
NYErrorFailed to update thespooler registrykeys. Error= %d.
PrintSpool7006
NYErrorThe spooler path ‘%s’ isnot valid.
PrintSpool7007
NYErrorFailed to enumerate theprocesses in the system.Error = %d.
PrintSpool7008
VCS Management Pack monitoring rulesAgents monitoring rules
76
Table 3-15 PrintSpool Agent Event Processing Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NYErrorSpooler is not running.PrintSpool7009
NYErrorFailed to initialize thespooler. Error=%d.
PrintSpool7010
NYErrorDuplicate Lanman name(%s) provided. AnotherPrintSpool resource existswith this Lanman name.
PrintSpool7011
NYErrorDuplicate IP address (%s)provided. AnotherPrintSpool resource existswith this IP.
PrintSpool7012
NYErrorFailed to allocatememory.PrintSpool7013
NYErrorFailed to get internal datafor resource ‘%s’. Probablyopen entry point for thisresource has failed.
PrintSpool7014
NYWarningAttribute mismatch forLanman resource.Attribute change is notsupported.
PrintSpool7015
NYWarningAttribute mismatch for IPresource. Attribute changeis not supported.
PrintSpool7016
NYErrorFailed to open acommunication channel tothe helper process.Error=%d.
PrintSpool7017
NYErrorFailed to online the virtualspooler. Error=%d.
PrintSpool7018
NYErrorThehelper process for thisresource exitedautomatically.
PrintSpool7019
77VCS Management Pack monitoring rulesAgents monitoring rules
Table 3-15 PrintSpool Agent Event Processing Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NYErrorThe communicationchannel to the helperprocess is invalid.
PrintSpool7020
NYErrorFailed to offline theresource. Error=%d.Killing the helper process.
PrintSpool7021
NYErrorFailed to terminate thehelper process. Error=%d.
PrintSpool7022
NYErrorFailed to create the helperprocess. Error=%d.
PrintSpool7024
NYWarningFailed to enumerate theprocesses in the system.Error=%d.
PrintSpool7025
NYErrorFailed to initialize thehelper process. Error=%d.
PrintSpool7026
NYErrorThe helper process is notready to acceptcommand=%d.Administrativeintervention may berequired.
PrintSpool7027
NYErrorFailed to send thecommand=%d to thehelper process. Error=%d.
PrintSpool7028
NYErrorThe communicationchannel with the helperprocess has timed out.
PrintSpool7029
NYErrorFailed to receive a replyfrom the helper process.Error=%d.
PrintSpool7030
Proxy agent event processing rulesTable 3-16 lists the Proxy agent rules included in the VCS Management Pack.
VCS Management Pack monitoring rulesAgents monitoring rules
78
Table 3-16 Proxy Agent Event Processing Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NYErrorTarget Resource Name is not avalid name
Agents2501
NYErrorUnable to get the computername
Agents2502
NYErrorUnable to determine the stateusing input values
Agents2503
NYErrorTarget resource is not ProbedAgents2504
NYErrorUnable to convert the resourceName. Error Code %d
Agents2505
NYErrorUnable to find VCS_HOME.Error Code %d
Agents2506
NYErrorUnable to identify the state ofthe resource. Error Code %d
Agents2507
NYErrorUnable to convert the buffer.Error Code %d
Agents2508
IP agent event processing rulesTable 3-17 lists the IP agent rules included in the VCS Management Pack.
Table 3-17 IP Agent Event Processing Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYErrorInvalid attributesAgents4003
NYErrorPing failed for IP (IP_Address).Agents4004
NYErrorHost (IP_Address) alreadyexists
Agents4005
NYErrorFailed to add IP (IP_Address).Agents4006
NYErrorInitialization failedAgents4001
NYErrorFailed to delete IP(IP_Address).
Agents4007
79VCS Management Pack monitoring rulesAgents monitoring rules
Table 3-17 IP Agent Event Processing Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYWarningIP (IP_Address) is Admin IPAgents4008
NYErrorInvalid MacAddress formatAgents4009
NYErrorInvalid MacAddress(MAC_Address) specified
Agents4017
NYWarningTCP/IP is not enabled foradapter (%s)
Agents4018
NYErrorInvalid IP formatAgents4010
NYErrorInternal errorAgents4011
NYErrorIncorrect IP (IP_Address)Agents4012
NYErrorIncorrect subnet mask(SubNet_Mask)
Agents4013
NYErrorAdapter (MAC_Adress) notfound
Agents4014
NYErrorDHCP is enabled on Adapter(%s)
Agents4015
NYErrorInvalid Adapter(MAC_Address)
Agents4016
NYErrorFailed toupdate the IP registrykeys. Error = %d.
Agents4019
IPMultiNicPlus agent event processing rulesTable 3-18 lists the IPMultiNicPlus agent rules included in the VCS ManagementPack.
Table 3-18 IPMultiPlus Agent Event Processing Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYErrorAdapterList is Invalid . Pleasecheck the configuration.
Agents4501
NYErrorInternal error.Error : %sAgents4502
VCS Management Pack monitoring rulesAgents monitoring rules
80
Table 3-18 IPMultiPlus Agent Event Processing Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYErrorInternal error. Adapter: %sError: %d
Agents4503
NYErrorInternal error. ReturningUnknown state. Error: %d
Agents4504
NYErrorAdmin IP address notspecified. Check theconfiguration.
Agents4505
NYErrorIP address %s is not instandard ‘a.b.c.d’ form
Agents4506
NYErrorInvalid Admin IP address.Check the configuration.Admin IP: %s
Agents4507
NYErrorAdmin SubNetMask notspecified. Check theconfiguration.
Agents4508
NYErrorSubNetMask %s is not instandard ‘a.b.c.d’ form
Agents4509
NYErrorInvalid Admin SubNetMask.Check the configuration.Admin SubNetMask: %s
Agents4510
NYErrorAddIPAddress() failed for IP%S !!
Agents4511
NYErrorWaitForSingleObject() Failed!!
Agents4513
NYErrorWaitForMultipleObjects()Failed !!
Agents4514
NYWarningAdminIp configured used byan adapter which is notpresent in the configuration
Agents4515
NYWarningIp %s already exists on thenetwork
Agents4604
81VCS Management Pack monitoring rulesAgents monitoring rules
Table 3-18 IPMultiPlus Agent Event Processing Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYErrorDeleteIPAddress() Failed forIP %s !!
Agents4512
NYErrorInvalid MAC address %sspecified in adapter List
Agents4516
NYErrorTCP/IP is not enabled forMACaddress %s specified inadapter List
Agents4530
NYErrorDHCP is enabled on Adapter(%s)
Agents4532
NYErrorInvalid Adapter (%s)Agents4533
NYErrorNo adapters specified in theAdapterList.
Agents4517
NYWarningInvalid IP format (%s)Agents4531
NYErrorPingHostList is EmptyAgents4518
NYErrorIP Address not specified.Check the configuration.
Agents4519
NYErrorInvalid IPAddress :%s . Checkthe configuration.
Agents4520
NYErrorSubNetMask not specified.Check the configuration.
Agents4521
NYErrorInvalid SubNetMask : %s .Check the configuration.
Agents4522
NYErrorInternal error. ReturningUnknownstate. Error:%d-%d
Agents4523
NYErrorInvalidMACaddress specifiedin the AdapterList. MACAddress: %s
Agents4524
NYError“VCS internal error, contactsupport. Returning Unknownstate. Adapter: %s Error:%d-%d”
Agents4525
VCS Management Pack monitoring rulesAgents monitoring rules
82
Table 3-18 IPMultiPlus Agent Event Processing Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYErrorInternal error. Error: %d-%dAgents4527
NYErrorInternal error. Adapter: %sError: %d-%d
Agents4526
NetLsnr agent event processing rulesTable 3-19 lists the NetLsnr agent rules included in the VCS Management Pack.
Table 3-19 NetLsnr Agent Event Processing Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYErrorCannot Open Service handlefor %s (Windows Error Code= %d)
Agents19
NYErrorCannot Start Service(Windows Error Code = %d)
Agents1
NYErrorCannot Start Service(Windows Error Code = %d)
Agents23
NYErrorCannot Stop ServiceAgents2
NYErrorCannotCloseServiceHandle(Windows Error Code = %d)
Agents11
NIC agent event processing rulesTable 3-20 lists the NIC agent rules included in the VCS Management Pack.
Table 3-20 NIC Agent Event Processing Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NYWarningInvalid MacAddress(MAC_Address) specified
Agents3504
NYWarningInternal errorAgents3505
83VCS Management Pack monitoring rulesAgents monitoring rules
Table 3-20 NIC Agent Event Processing Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NYWarningTCP/IP is not enabled foradapter (Adapter_Name)
Agents3515
NYErrorError percentage exceededfor (Adapter_Name)
Agents3506
NYErrorAdapter (Adapter_Name)Connection status cannotbe found.
Agents3507
NYErrorAdapter (Adapter_Name)is not connected
Agents3513
NYWarningPingHostList not specified.Agents3508
NYErrorUDP echo attempt failed.Agents3509
NYErrorUDP check failed due tonework error.
Agents3510
NYErrorFailed to create Mutex.Agents1234
NYErrorFailed to get IFEntry foradapter %s
Agents3514
NYErrorAdapter (Adapter_Name)not found
Agents3512
NYErrorError percentage exceededlimit
Agents3516
NotifierMngr agent event processing rulesTable 3-21 lists the NotifierMngr agent rules included in the VCS ManagementPack.
Table 3-21 NotifierMngr Agent Event Processing Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NYErrorFailed to get Notifier commandline.
Agents5011
VCS Management Pack monitoring rulesAgents monitoring rules
84
Table 3-21 NotifierMngr Agent Event Processing Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NYErrorFailed to Start Notifier Process%s. (Windows Error Code = %d)
Agents5002
NYErrorFailed toOfflineNotifierProcess.PID = %u (Windows Error Code= %d)
Agents5004
NYErrorFailed to Clean Notifier Process.PID = %u (Windows Error Code= %d)
Agents5005
NYErrorFailed to Open Notifier Process.PID = %u (Windows Error Code= %d)
Agents5003
NYErrorPID mismatch in cache. PID =%u (Cached Object PID = %u)
Agents5012
NYErrorNotifierMngr:Unable to connectto (SMTP Server)
Agents5013
NYErrorNotifierMngr:Invalid emailaddress format of SMTPRecipient.
Agents5014
NYWarningExpected correct SNMP and | orSMTP options
Agents5008
NYErrorUnable to findVCS_HOME.ErrorCode %d
Agents5010
NYErrorFailed to enumerate theprocesses. Error = %d.
Agents6533
NYErrorFailed to allocate memory.Agents6534
NYErrorFailed to open the process(%d).Error = %d.
Agents6535
Registry Replication (RegRep) agent event processing rulesTable 3-22 lists the RegRep agent rules included in the VCS Management Pack.
85VCS Management Pack monitoring rulesAgents monitoring rules
Table 3-22 Registry Replication (RegRep) Agent Event Processing Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYError”Failed to restore the registry(key= Key_name
Agents5508
NYErrorRestore operation of Exclude Keyis not attempted as failed to locatethe backup file (Key=%s)
Agents5534
NYErrorConfigurationError :Mismatchedquotes in option %s
Agents5537
NYErrorConfiguration Error : Key‘Key_name’ is configured inReplication Key List as well as inExclude Key List
Agents5530
NYErrorConfiguration Error : Key‘Key_name’ configured inReplication Key List is a Sub Keyof key ‘%s’ configured in ExcludeKey List
Agents5531
NYErrorFailed to get computer name(Info=%s)
Agents5511
NYErrorCould not add privilege(privilege=%s)
Agents5505
NYErrorThe name of the local host isinvalid (hostname= host_name)
Agents5506
NYErrorDirectory does not exist (or) couldnot create (directory=Drivename:path)
Agents5503
NYWarning”Windows Error Code %dencountered while accessing key\%s\””.”””
Agents5538
NYErrorFailed to delete the Exclude Key(Key=%s)
Agents5535
NYErrorExclude Key is newly created andcould not be deleted (Key=%s)
Agents5536
NYWarningFailed to bring resource onlineAgents5529
VCS Management Pack monitoring rulesAgents monitoring rules
86
Table 3-22 Registry Replication (RegRep) Agent Event Processing Rules(continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYErrorFailed to get replication pathAgents5518
NYErrorCould not talk tomonitor process(Info=%d)
Agents5513
NYWarningCould not locate the file(file=file_name)
Agents5520
NYWarningInitialization failed.(reason)Agents5706
NYWarningFailed to set %SAgents5524
NYErrorDelete and restore not attemptedas backup file can’t be created(Key=%s)
Agents5521
NYErrorProcessnot responding (Info=%s)Agents5514
NYWarningShared memory still exists evenafter the process exited (Info=%s)
Agents5515
NYErrorFailed to communicate monitorregistry keys toRegRepMonitor.exe
Agents5517
NYError”Failed to communicatereplication path toRegRepMonitor.exe (Drive=%s
Agents5516
NYErrorFailed to backup Exclude Key(Key=%s)
Agents5533
NYErrorBackup of Exclude Key is notattempted as backup file can’t becreated (Key=%s)
Agents5532
Lanman agent event processing rulesTable 3-23 lists the Lanman agent rules included in the VCS Management Pack.
87VCS Management Pack monitoring rulesAgents monitoring rules
Table 3-23 Lanman Agent Event Processing Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYError”Internal error (Failed toinitialize COM
Agents3001
NYError”Internal error (Failed toinitialize virtualname object
Agents3002
NYWarning”Internal error (Failed tovalidate virtual server name
Agents3003
NYErrorVirtual server name specifiedin the configuration is invalid(%s)
Agents3004
NYErrorVirtual name already exist inthe network
Agents3005
NYError”Failed to register Virtualserver name to Netbios(error_type:%d
Agents3008
NYError”Internal error (Failed todetach computer account
Agents3010
NYError”Failed to start the ‘VeritasClusterServerHelper’ service.(error_type:%d
Agents3011
NYError”Internal error (Failed toswitch the security context
Agents3012
NYErrorIP address specified forMultiNetInfo is invalid(entry=%S)
Agents3017
NYErrorSubnetMask specified forMultiNetInfo is invalid(entry=%S)
Agents3018
NYErrorWINS address specified forMultinetInfo is invalid(entry=%S)
Agents3019
NYErrorInternal error (invalidargument list)
Agents3020
VCS Management Pack monitoring rulesAgents monitoring rules
88
Table 3-23 Lanman Agent Event Processing Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYErrorVirtualName attribute is notspecified in the configuration
Agents3021
NYErrorIP address specified in theconfiguration is invalid
Agents3022
NYErrorSubnetMask specified in theconfiguration is invalid
Agents3023
NYErrorMultinetInfo attributespecified in the configurationis in invalid format
Agents3024
NYErrorThere are no valid IPaddresses specified in theconfiguration
Agents3025
NYWarningInvalid option specified fortheDNSOptionsattribute (%s)
Agents3009
NYErrorIP address specified in theconfiguration is not online.(ip=%S)
Agents3026
NYErrorMismatch in the subnetmaskspecified in configuration andthe actual subnet maskconfigured for the adapter
Agents3027
NYWarningWINSaddress specified in theconfiguration is not found inthe adapter’s WINS addresslist
Agents3028
NYError”Failed to update DNS entry(error_type:%d
Agents3006
NYError”Failed to update Computeraccount in Active directory(error_type:%d
Agents3007
NYError”Internal error (Failedinitialize netbios tableinformation
Agents3029
89VCS Management Pack monitoring rulesAgents monitoring rules
Table 3-23 Lanman Agent Event Processing Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYError”Attempt to online theLanman resource has failed.error_type:%d
Agents3032
NYErrorInvalid attributes exist in theconfiguration
Agents3033
NYError”Attempt to offline theLanman resource has failed.(error_type:%d
Agents3034
NYError”Attempt to clean theLanmanresource has failed.(error_type:%d
Agents3036
VvrRvg agent event processing rulesTable 3-24 lists the VvrRvg agent rules included in the VCS Management Pack.
Table 3-24 VvrRvg Agent Event Processing Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYErrorFailed to allocate resourceinstance memory
VvrRvg1
NYWarningFailed to find resourceinstance
VvrRvg2
NYErrorFailed toopenRVG.Error code:%S
VvrRvg3
YYErrorOne or more attributes areincorrectly configured
VvrRvg4
NYErrorRVG is in a FAIL state.Resource cannot be Onlined
VvrRvg5
YYErrorOnline failed. Error code: %SVvrRvg6
YYErrorRVG is in an invalid state.Resource cannot be Onlined
VvrRvg7
VCS Management Pack monitoring rulesAgents monitoring rules
90
Table 3-24 VvrRvg Agent Event Processing Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
YYErrorMonitor failed. Error code:%SVvrRvg8
YYErrorOffline failed. Error code: %SVvrRvg9
YYErrorClean failed. Error code: %SVvrRvg10
NYErrorClose failed. Error code: %SVvrRvg11
NYWarningFailed to detect the configuredRVG
VvrRvg12
YYErrorInvalid value specified forattribute: %S
VvrRvg13
NYErrorOperation timed outVvrRvg14
NYErrorAsynchronous operationfailed. Error: %S
VvrRvg15
NYErrorFailed to get the name of thelocal computer. Error code:%S
VvrRvg16
NYErrorCouldn’t find the IP ResourceVvrRvg17
NYErrorFailed to create the monitorprocess for the IP Resource.Error code: %S
VvrRvg18
NYError”Received an unknown statefor the IP Resource
VvrRvg19
NYErrorThe target host is notresponding
VvrRvg20
RVGPrimary agent event processing rulesTable 3-25 lists the RVGPrimary agent rules included in the VCS ManagementPack.
91VCS Management Pack monitoring rulesAgents monitoring rules
Table 3-25 RVGPrimary Agent Event Processing Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
YYErrorRVGattribute not assigned forresource %2$s; please checkthe assignment ofRvgResource name attributefor this resource or RVGattribute for %3$s
HAD1
YYErrorDiskGroupName attribute notassigned for resource %2$s;please check the assignmentof VMDgResource nameattribute for %3$s orDiskGroupName attribute for%4$s
HAD2
YYErrorNo RLinks found for RVG%2$s; please setup RLinks forRVG %3$s
HAD3
NNErrorLockfile (%2$s) was notsuccessfully removed
HAD5
YNErrorRLink %2$s is inconsistent;please restore %3$s from aconsistent snapshot or backupand promote it to primary,clear its service group, andonline group again
HAD7
NNErrorRLink %2$s is up to date butinsufficient time to completetakeover; if group does not goonline clear fault and onlineagain
HAD10
YYErrormigrate of %2$s failed witherror code %3$s and message%4$s
HAD11
YYErrortakeover of %2$s failed witherror code %3$s and message%4$s
HAD13
VCS Management Pack monitoring rulesAgents monitoring rules
92
Table 3-25 RVGPrimary Agent Event Processing Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NNWarningRLink %2$s is not connected;use 'vxrvg -g %3$s -Fmakeprimary%4$s' commandto takeover
HAD17
YYErrorRVG %2$s isacting_secondary. Pleaseresync from primary
HAD18
YYErrorVMDgResName attribute notassigned for resource %2$s;please check the assignmentofRvgResourcenameattributefor this resource orVMDgResName attribute for%3$
HAD20
NNErrorFailed toaddother secondariesin the RDS
HAD21
YYErrorSynchronization of secondary%2$s failed with error code%3$s and message %4$s
HAD23
NNErrorCheckend operation on RVG%2$s failed with error code%3$s and message %4$s
HAD24
NNErrorAttaching secondary %2$sfailed with error code %3$sand message %4$s
HAD25
NNErrorCheckstart of RVG %2$s withcheckpoint %3$s failed witherror code %4$s and message%5$s
HAD26
NNErrorRemote execution onsecondary %2$s failed witherror code %3$s and message%4$s
HAD27
NNErrorResynchronization can bestarted only from the primary
HAD30
93VCS Management Pack monitoring rulesAgents monitoring rules
Table 3-25 RVGPrimary Agent Event Processing Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NNErrorResynchronization from RVG%2$s failed with error code%3$s
HAD31
NErrorvxprint failed with error code%2$s and message %3$s
HAD32
YErrorInsufficient time to completemigrate operation for RVG%2$s. If group does not goonline clear fault and onlineagain
HAD33
NErrorFailed to determine the role ofRVG %2$s. The value of rolefound %3$s
HAD35
NErrorThe checkpoint%2$s takenbyRVGPrimaryresourcedoesnotmatch with the currentcheckpoint %3$s on RVG%4$s
HAD38
NErrorAttaching secondary %2$swith checkpoint %3$s failedwith error code %4$s andmessage %5$s
HAD39
NErrorRVG%2$s is not checkstartedHAD40
NNErrorTheActivate bunker operationfailed forRVG%2$sonbunkerhost %3$s and disk group%4$s with error code %5$sand message %6$s
HAD42
NNErrorThe startrep operation failedfor RVG %2$s with error code%3$s and message %4$s
HAD43
NNErrorThe attach operation failed forrlink %2$s
HAD45
NNErrorBunker sync timed outHAD48
VCS Management Pack monitoring rulesAgents monitoring rules
94
Table 3-25 RVGPrimary Agent Event Processing Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NNErrorDuring rollback, the %2$scommand failed with errorcode %3$s and message %4$s
HAD49
NErrorDiskgroup %2$s could not beimported on primary host.Operation failed with error%3$s and message %4$s
HAD61
NErrorDiskgroup %2$s could not beimported on bunker host%3$s. Operation failed witherror%4$s andmessage%5$s
HAD64
Enterprise application agents
MSDTC event processing rulesTable 3-26 lists the MSDTC agent rules included in the VCS Management Pack.
Table 3-26 MSDTC Event Processing Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYErrorFailed to convert theargument list. Error = %d.
Agents1
NYErrorLanman attribute has notbeen configured.
Agents2
NYErrorMountResName attribute hasnot been configured.
Agents3
NYErrorLogPath attribute has notbeen configured.
Agents4
NYErrorLogPath attribute has invalidcharacters.
Agents5
95VCS Management Pack monitoring rulesEnterprise application agents
Table 3-26 MSDTC Event Processing Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYError“Not the owner of MSDTCservice. MSDTC is currentlyowned by VCS resource, %s”
Agents36
NYError“MSDTC service is not ownedby the resource, %s”
Agents37
NYErrorFailed to open the registry key‘%s’. Error = %d.
Agents14
NYErrorFailed to set the key ‘%s’.Error = %d.
Agents15
NYErrorFailed to open the SCMhandle. Error = %d.
Agents11
NYErrorFailed to open the MsDtcservice. Error = %d.
Agents12
NYErrorFailed to enable the networkaccess for MSDTC. Error =%d.
Agents29
NYErrorFailed to set the environmentkey of MSDTC service. Error= %d.
Agents13
NYErrorCould not reset themsdtc log.Error = %d.
Agents16
NYWarningThe log file does not exist. Logfile = ‘%s’.
Agents18
NYErrorFailed to start the MSDTCservice. Error = %d.
Agents19
NYErrorFailed to wait for the MSDTCservice to start. Error = %d.
Agents20
NYErrorFailed to get the status of theMSDTC service. Error = %d.
Agents21
NYErrorFailed to set the logpath key‘%s’. Error = %d.
Agents23
VCS Management Pack monitoring rulesEnterprise application agents
96
Table 3-26 MSDTC Event Processing Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYWarningThe MSDTC log path is ‘%s’.Configured one is ‘%s’.
Agents24
NYErrorFailed to kill the MSDTCservice. Error = %d.
Agents25
NYErrorFailed to query the MSDTCservice status. Error = %d.
Agents26
NYWarningThe MSDTC service is not inrunning state. Offline mightbe unsuccessful.
Agents27
NYErrorFailed to stop the MSDTCservice. Error = %d.
Agents28
NYErrorFailed to wait for the MSDTCservice to stop. Error = %d.
Agents30
NYErrorFailed to open theMSDTCCIDkey. Error = %d.
Agents40
NYWarningFailed to enumerate keys.Error = %d.
Agents41
NYWarningFailed to open the subkey‘%s’. Error = %d.
Agents42
NYWarningFailed to query the value thesubkey ‘%s’. Error = %d.
Agents43
MSSearch event processing rulesTable 3-27 lists theMSSearch agent rules included in the VCSManagement Pack.
Table 3-27 MSSearch Event Processing Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYErrorFailed to get the attributes. Error= %d.
Agents1
97VCS Management Pack monitoring rulesEnterprise application agents
Table 3-27 MSSearch Event Processing Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYErrorThe AppName attribute has notbeen configured.
Agents2
NYErrorThe AppPath attribute has notbeen configured.
Agents3
NYErrorFailed to get the MicrosoftSearch service instance for ‘%s’.Error = %8X.
Agents23
NYErrorFailed to instantiate theMicrosoft Search COM object.Error = %8X.
Agents11
NYErrorFailed to open the MicrosoftSearch service. Error = %d.
Agents12
NYWarningFailed to determine the state ofMicrosoft Search service. Error= %d.
Agents13
NYErrorThe AppName attribute has notbeen configured correctly.
Agents24
NYErrorFailed to open the registry key‘%s’. Error = %d.
Agents14
NYErrorFailed to set the registry forapplication = ‘%s’. Error = %d.
Agents15
NYErrorFailed to create theCoMsssBridge object. Error =%8X.
Agents20
NYErrorFailed to open the MicrosoftSearch instance for ‘%s’. Error =%8X.
Agents16
NYErrorFailed to online the MicrosoftSearch instance for ‘%s’. Error =%8X.
Agents17
NYErrorFailed to offline the MicrosoftSearch instance for ‘%s’. Error =%8X.
Agents18
VCS Management Pack monitoring rulesEnterprise application agents
98
Table 3-27 MSSearch Event Processing Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYErrorFailed to close the MicrosoftSearch instance for ‘%s’. Error =%8X.
Agents19
NYErrorFailed to terminate theMicrosoftSearch service. Error = %d.
Agents21
NYErrorFailed to enable the debugprivilege. Error = %d.
Agents22
SQL Server 2012 Agent event processing rulesTable 3-28 lists the SQLServer 2012Agent rules included in theVCSManagementPack.
Table 3-28 SQL Server 2012 Agent Event Processing Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
YYError"%s:The '%s' service is in STARTEDstate but is not running under thecontext of Virtual Server '%s'"
Agents11
YYError"%s:Sql script has failed with error%s"
Agents23
NYError"%s:Failed to initialize theSQLServer2012 agent."
Agents3
NYError"%s:Failed to set the virtualcomputername in the environmentof the service '%s'. Error = %s."
Agents7
NYError"%s:Failed to stop the dependentservices of the service '%s'. Error =%s."
Agents16
NYError"%s:Failed to start the Sql script.(User = %s, Domain = %s) Error :%s"
Agents20
NYError"%s:Failed to open the MSDTCservice. Error = %s."
Agents34
99VCS Management Pack monitoring rulesEnterprise application agents
SQL Server 2008 Agent event processing rulesTable 3-29 lists the SQLServer 2008Agent rules included in theVCSManagementPack.
Table 3-29 SQL Server 2008 Agent Event Processing Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
YYError"%s:The '%s' service is in STARTEDstate but is not running under thecontext of Virtual Server '%s'"
Agents11
YYError"%s:Sql script has failed with error%s"
Agents23
NYError"%s:Failed to initialize theSQLServer2008 agent."
Agents3
NYError"%s:Failed to set the virtualcomputername in the environmentof the service '%s'. Error = %s."
Agents7
NYError"%s:Failed to stop the dependentservices of the service '%s'. Error =%s."
Agents16
NYError"%s:Failed to start the Sql script.(User = %s, Domain = %s) Error :%s"
Agents20
NYError"%s:Failed to open the MSDTCservice. Error = %s."
Agents34
SQL Server 2005 Agent Service event processing rulesTable 3-30 lists the SQL Server Agent Service agent rules included in the VCSManagement Pack.
Table 3-30 SQL Server 2005 Agent Service Event Processing Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYErrorFailed to convert the argumentlist. Error = %d.
Agents1
VCS Management Pack monitoring rulesEnterprise application agents
100
Table 3-30 SQL Server 2005 Agent Service Event Processing Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYErrorInvalid Arglist entry at position%d for <attribute name>.
Agents99
NYWarningThe service ‘%s’ is not instopped state.
Agents8
NYErrorFailed to set the virtualcomputer name in theenvironment of the service ‘%s’.Error = %d.
Agents11
NYErrorFailed to start the service ‘%s’.Error = %d.
Agents9
NYErrorThe service ‘%s’ did not startwithin the specified time limit.
Agents12
NYErrorFailed to wait for the service‘%s’ to start. Error = %d.
Agents13
NYWarningThe ‘%s’ service is not instopped or running state.State=%d.
Agents14
NYWarningThe ‘%s’ service is in STARTEDstate but is not running underthe context of Virtual Server‘%s’
Agents16
NYWarningFailed to remove the virtualname environment for theservice ‘%s’ Error : (%d:%d)
Agents38
NYErrorFailed to open the service ‘%s’.Error %d.
Agents20
NYErrorFailed to query the status of theservice ‘%s’. Error = %d.
Agents21
NYWarningThe service ‘%s’ is not inrunning state. Attempt to stopit might be unsuccessful.
Agents22
NYErrorThe service ‘%s’ did not stop.Error = %d.
Agents23
101VCS Management Pack monitoring rulesEnterprise application agents
Table 3-30 SQL Server 2005 Agent Service Event Processing Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYWarningThe service ‘%s’ did not stopwithin the specified timeout.Error = %d.
Agents24
NoYes-SQL Server 2005 ServiceAvailability in VCS
--
NoYes-SQL Server 2005 Block Analysisin VCS
--
NoYes-SQL Server 2005 DatabaseHealth in VCS
--
NoYes-SQL Server 2005 Long RunningAgent Jobs in VCS
--
NoYes-SQL Server 2005 ReplicationMonitoring in VCS
--
NoYes-SQL Server 2005 ServiceDiscovery in VCS
--
NoYes-SQLServer 2005SpaceAnalysisin VCS
--
SQL Server 2005 OLAP Service event processing rulesTable 3-31 lists the SQL Server OLAP Service agent rules included in the VCSManagement Pack.
Table 3-31 SQL Server 2005 OLAP Service Event Processing Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYErrorFailed to convert the argumentlist. Error = %d.
Agents1
NYErrorInvalidArglist entry at position%d for <attribute name>.
Agents99
NYWarningThe service ‘%s’ is not instopped state.
Agents8
VCS Management Pack monitoring rulesEnterprise application agents
102
Table 3-31 SQL Server 2005 OLAP Service Event Processing Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYErrorFailed to set the virtualcomputer name in theenvironmentof the service ‘%s’.Error = %d.
Agents11
NYErrorFailed to start the service ‘%s’.Error = %d.
Agents9
NYErrorThe service ‘%s’ did not startwithin the specified time limit.
Agents12
NYErrorFailed to wait for the service‘%s’ to start. Error = %d.
Agents13
NYWarningThe ‘%s’ service is not instopped or running state.State=%d.
Agents14
NYWarningThe ‘%s’ service is in STARTEDstate but is not running underthe context of Virtual Server‘%s’
Agents16
NYWarningFailed to remove the virtualname environment for theservice ‘%s’ Error : (%d:%d)
Agents38
NYErrorFailed to open the service ‘%s’.Error %d.
Agents20
NYErrorFailed to query the status of theservice ‘%s’. Error = %d.
Agents21
NYWarningThe service ‘%s’ is not inrunning state. Attempt to stopit might be unsuccessful.
Agents22
NYErrorThe service ‘%s’ did not stop.Error = %d.
Agents23
NYWarningThe service ‘%s’ did not stopwithin the specified timeout.Error = %d.
Agents24
103VCS Management Pack monitoring rulesEnterprise application agents
SQL Server 2005 event processing rulesTable 3-32 lists the SQLServer 2005 agent rules included in theVCSManagementPack.
Table 3-32 SQL Server 2005 Event Processing Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYWarningThe service ‘%s’ is not instopped state.
Agents8
NYErrorFailed to set the virtualcomputer name in theenvironment of the service‘%s’. Error = %d.
Agents11
NYErrorFailed to start the service‘%s’. Error = %d
Agents9
NYErrorThe service ‘%s’ did not startwithin the specified timelimit.
Agents12
NYErrorFailed to wait for the service‘%s’ to start. Error = %d.
Agents13
NYWarningThe ‘%s’ service is not instopped or running state.State=%d.
Agents14
NYWarningThe ‘%s’ service is inSTARTED state but is notrunning under the context ofVirtual Server ‘%s’
Agents16
NYWarningFailed to remove the virtualname environment for theservice ‘%s’ Error : (%d:%d)
Agents38
NYErrorFailed to open the service‘%s’. Error %d.
Agents20
NYErrorFailed to query the status ofthe service ‘%s’. Error = %d.
Agents21
NYWarningThe service ‘%s’ is not inrunning state. Attempt tostop itmight beunsuccessful.
Agents22
VCS Management Pack monitoring rulesEnterprise application agents
104
Table 3-32 SQL Server 2005 Event Processing Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYErrorThe service ‘%s’ did not stop.Error = %d.
Agents23
NYWarningThe service ‘%s’ did not stopwithin the specified timeout.Error = %d.
Agents24
NYErrorFailed to get the temporaryfile path. Error : %d
Agents34
NYError“Failed to start the Sql script.(User = %s, Domain = %s)Error : %d”
Agents31
NYErrorFailed to create thetemporary file. error %d
Agents35
NYErrorUnable to convert the bufferto UNICODE. Error Code %d
Agents32
NYErrorSql script has failed witherror %d
Agents25
NYErrorSql script failed. Scriptoutput :
Agents33
NYError%sAgents36
NYErrorFailed read the temporaryfile. Error : %d
Agents37
NYErrorError occurred while gettingthe process exit code. error :%d
Agents26
NYErrorWaitForSingleObject failedwith error %d
Agents27
NYErrorFailed to convert theargument list. Error = %d.
Agents1
NYErrorThe password attribute hasnot been configured.
Agents30
105VCS Management Pack monitoring rulesEnterprise application agents
Table 3-32 SQL Server 2005 Event Processing Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYErrorFailed to convert thepassword attribute. Error =%d.
Agents17
Service Monitor event processing rulesTable 3-33 lists the ServiceMonitor agent rules included in the VCSManagementPack.
Table 3-33 Service Monitor Event Processing Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYErrorFailed to convert the argumentlist. Error = %d.
ServiceMonitor7501
NYErrorThe ServiceOrScriptNameattribute has not beenconfigured.
ServiceMonitor7502
NYErrorFailed to lookup the accountname ‘%s’. Error = %d.
ServiceMonitor7503
NYErrorThepassword attribute hasnotbeen configured.
ServiceMonitor7504
NYErrorFailed to open the service ‘%s’.Error = %d.
ServiceMonitor7506
NYErrorFailed to query the status of theservice ‘%s’. Error = %d.
ServiceMonitor7507
NYWarningThe service ‘%s’ is not inrunning state.
ServiceMonitor7508
NYErrorFailed to get the user contextof the running service ‘%s’.Error = %d.
ServiceMonitor7509
NYErrorFailed to get the SID for user‘%s\\%s’.
ServiceMonitor7510
VCS Management Pack monitoring rulesEnterprise application agents
106
Table 3-33 Service Monitor Event Processing Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYWarningThe service ‘%s’ is not runningunder the context of user‘%s\\%s’.
ServiceMonitor7511
NYErrorFailed to get the password.ServiceMonitor7513
NYErrorFailed to launch the monitorscript ‘%s’. Error = %d.
ServiceMonitor7514
NYWarningMonitor script has notrespondedwithin the specifiedtimeout of %d seconds. Error= %d.
ServiceMonitor7515
NYWarningFailed to terminate themonitorprogram. Error = %d.
ServiceMonitor7516
NYWarningFailed to get exit code of themonitor program. Error = %d.
ServiceMonitor7517
Oracle Agent event processing rulesTable 3-34 lists the Oracle Agent agent rules included in the VCS ManagementPack.
Table 3-34 Oracle Agent Event Processing Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYErrorCannot Open Servicehandle for %s (WindowsError Code = %d)
Agents19
NYErrorCannot StopParent Service%s
Agents26
NYError“Failed todecrypt password, error code:%d”
Agents2
NYErrorWait for mutex failed.(WindowsError Code=%d)
Agents20
107VCS Management Pack monitoring rulesEnterprise application agents
Table 3-34 Oracle Agent Event Processing Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYErrorWait for mutex abandoned(WindowsError Code=%d)
Agents21
NYErrorCannot wait for mutexobject (WindowsErrorCode= %d)
Agents22
NYErrorAn Oracle error occurred.Error :\n %s
Agents6
NYErrorSQL*Plus process exitedwith error %d
Agents7
NYErrorInvalid filename inargument list :%s (WindowsError Code = %d)
Agents8
NYErrorCannot Start Service(WindowsError Code=%d)
Agents23
NYErrorCannot Stop ServiceAgents11
NYErrorCannot wait for StopService
Agents34
NYError“Failed to stop the parentservice(s) with error code,%s”
Agents33
NYErrorFailed to Get VCS_HOMEAgents32
NetAppFiler agent event processing rulesTable 3-35 lists the NetAppFiler agent rules included in the VCS ManagementPack. This is in case of VCS for NetApp SnapMirror only.
Table 3-35 NetAppFiler Agent Event Processing Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYErrorUnable to get thearguments
Agents40
VCS Management Pack monitoring rulesEnterprise application agents
108
Table 3-35 NetAppFiler Agent Event Processing Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYErrorFilerName attribute is notspecified
Agents73
NYErrorStorageIP attribute is notspecified
Agents43
NYError”Failed to start the ‘VeritasCluster Server Helper’service. (error_type:%d
Agents101
NYError”Internal error (Failed toswitch the security context
Agents102
NYErrorFailed to open connectionto filer %s
Agents59
NYErrorFailed to convert string %sto IP address
Agents97
NYError”Internal error (Ping failedAgents98
NetAppSnapDrive agent event processing rulesTable 3-36 lists theNetAppSnapDrive agent rules included in theVCSManagementPack. This is in case of VCS for NetApp SnapMirror only.
Table 3-36 NetAppSnapDrive Agent Event Processing Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NYErrorInvalid attributes exist inthe configuration
Agents105
NYError”Failed to start the ‘VeritasCluster Server Helper’service. (error_type:%d
Agents101
NYError”Internal error (Failed toswitch the security context
Agents102
109VCS Management Pack monitoring rulesEnterprise application agents
NetAppSnapMirror agent event processing rulesTable 3-37 lists the NetAppSnapMirror agent rules included in the VCSManagement Pack. This is in case of VCS for NetApp SnapMirror only.
Table 3-37 NetAppSnapMirror Agent Event Processing Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEventID
NErrorInvalid attributes exist inthe configuration
Agents105
NNError”Failed to start the ‘VeritasCluster Server Helper’service. (error_type:%d
Agents101
NError”Internal error (Failed toswitch the security context
Agents102
Agent Framework monitoring rulesTable 3-38 lists the Agent Framework rules included in the VCS ManagementPack.
Table 3-38 Agent Framework Monitoring Rules
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NNErrorResource(%s): Output of thecompleted operation (%s)\n%s
AgentFramework
13001
NNErrorOutput of the completedoperation (%s) \n%s
AgentFramework
13002
NNErrorResource(%s): Output of thetimed out operation (%s)\n%s
AgentFramework
13003
NNErrorOutput of the timed outoperation (%s) \n%s
AgentFramework
13004
NNErrorAgent(%s) is exiting due tointernal error.
AgentFramework
13005
VCS Management Pack monitoring rulesAgent Framework monitoring rules
110
Table 3-38 Agent Framework Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NNErrorResource(%s): cleanprocedure did not completewithin the expected time.
AgentFramework
13006
NNErrorResource(%s): closeprocedure did not completewithin the expected time.
AgentFramework
13007
NNErrorAgent rejected the offlinecommand for resource(%s)because the resource is notEnabled.
AgentFramework
13008
NNErrorAgent rejected the onlinecommand for resource(%s)because the resource is notEnabled.
AgentFramework
13009
NNErrorAgent rejected the probecommand for resource(%s)because the resource is notEnabled.
AgentFramework
13010
NNErrorResource(%s): offlineprocedure did not completewithin the expected time.
AgentFramework
13011
NNErrorResource(%s): onlineprocedure did not completewithin the expected time.
AgentFramework
13012
NNErrorResource(%s): openprocedure did not completewithin the expected time.
AgentFramework
13014
NNErrorResource(%s) faulted andthe attempt to automaticallyrestart it was not effective.Administrative interventionmay be required.
AgentFramework
13015
NNErrorAgent(%s) is exiting becausethe requiredargumentswerenot specified.
AgentFramework
13019
111VCS Management Pack monitoring rulesAgent Framework monitoring rules
Table 3-38 Agent Framework Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NNErrorAgent(%s) is exiting becauseit was given too manyarguments
AgentFramework
13020
NNErrorAgent(%s) is exiting becauseit was given unexpectedoption(%s)
AgentFramework
13021
NNErrorAgent(%s) is exiting becauseof invalid usage.
AgentFramework
13022
NNErrorResource(%s) - monitorprocedure finishedsuccessfully after failing tocomplete within theexpected time for (%s)consecutive times.
AgentFramework
13026
NNErrorResource(%s) - monitorprocedure did not completewithin the expected time.
AgentFramework
13027
NNErrorResource(%s) - the last (%s)invocations of the monitorprocedure did not completewithin the expected time.
AgentFramework
13028
NNErrorAttr_changed entry point ofresource(%s) requested thatthe timeout be extended by(%s) seconds
AgentFramework
13030
NNErrorClean entry point ofresource(%s) requested thatthe timeout be extended by(%s) seconds
AgentFramework
13031
NNErrorClose entry point ofresource(%s) requested thatthe timeout be extended by(%s) seconds
AgentFramework
13032
VCS Management Pack monitoring rulesAgent Framework monitoring rules
112
Table 3-38 Agent Framework Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NNErrorMonitor entry point ofresource(%s) requested thatthe timeout be extended by(%s) seconds
AgentFramework
13033
NNErrorOffline entry point ofresource(%s) requested thatthe timeout be extended by(%s) seconds
AgentFramework
13034
NNErrorOnline entry point ofresource(%s) requested thatthe timeout be extended by(%s) seconds
AgentFramework
13035
NNErrorOpen entry point ofresource(%s) requested thatthe timeout be extended by(%s) seconds
AgentFramework
13036
NNErrorAgent(%s): Monitor scriptfile (%s) not found.
AgentFramework
13037
NNErrorResource(%s): Errorexecuting the program(%s).
AgentFramework
13038
NNErrorResource(%s): Program(%s)was abnormally terminatedwith the exit code(%s).
AgentFramework
13039
NNErrorAgent(%s) is exiting becauseit encountered error(%s)when opening the lockfile(%s)
AgentFramework
13042
NNErrorAgent(%s) is exiting becauseit encountered error(%s)when locking file(%s)
AgentFramework
13043
NNErrorAgent(%s) is exiting becauseit encountered error(%s)when seeking to thebeginning of the lockfile(%s)
AgentFramework
13044
113VCS Management Pack monitoring rulesAgent Framework monitoring rules
Table 3-38 Agent Framework Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NNErrorAgent(%s) is exiting becauseit encountered error(%s)when writing to the lockfile(%s).
AgentFramework
13045
NNErrorAgent(%s) is exiting becauseof incomplete write (%s) of(%s) to the lock file(%s).
AgentFramework
13046
NNErrorAgent(%s) is exiting becauseit encountered error(%s)when releasing lock onfile(%s).
AgentFramework
13047
NNErrorAgent(%s) is exiting becauseit could not lock the file(%s)
AgentFramework
13050
NNErrorAgent(%s) is exiting becauseanother agent withprocess-id(%s) is alreadyrunning for this type
AgentFramework
13051
NNErrorAgent(%s) is exiting becauseit could not load the agentlibrary(%s).
AgentFramework
13061
NNErrorAgent(%s) is exiting becauseit could not findVCSAgStartup() in the agentlibrary (%s).
AgentFramework
13062
NNErrorAgent is calling clean forresource(%s) because offlinedid not complete within theexpected time.
AgentFramework
13063
NNErrorAgent is calling clean forresource(%s) because theresource is up even afteroffline completed.
AgentFramework
13064
VCS Management Pack monitoring rulesAgent Framework monitoring rules
114
Table 3-38 Agent Framework Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NNErrorAgent is calling clean forresource(%s) because onlinedid not complete within theexpected time.
AgentFramework
13065
NNErrorAgent is calling clean forresource(%s) because theresource is not up even afteronline completed.
AgentFramework
13066
NNError”Agent is calling clean forresource(%s) because theresource became OFFLINEunexpectedly
AgentFramework
13067
NNErrorResource(%s) - cleancompleted successfully.
AgentFramework
13068
NNErrorResource(%s) - clean failed.AgentFramework
13069
NNErrorResource(%s) - clean notimplemented.
AgentFramework
13070
NNErrorResource(%s): reachedOnlineRetryLimit(%s).
AgentFramework
13071
NNErrorResource(%s): Agent isretrying online (attemptnumber %s of %s).
AgentFramework
13072
NNErrorResource(%s) becameOFFLINE unexpectedly onits own. Agent is restarting(attempt number %s of %s)the resource.
AgentFramework
13073
115VCS Management Pack monitoring rulesAgent Framework monitoring rules
Table 3-38 Agent Framework Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NNErrorThemonitoring program forresource(%s) hasconsistently failed todetermine the resourcestatus within the expectedtime. Agent is restarting(attempt number %s of %s)the resource.
AgentFramework
13074
NNError”Resource(%s) has reportedunexpected OFFLINE %stimes
AgentFramework
13075
NNErrorAgent has successfullyrestarted resource(%s).
AgentFramework
13076
NNErrorAgent is unable to offlineresource(%s).Administrative interventionmay be required.
AgentFramework
13077
NNErrorResource(%s) - cleancompleted successfully after%s failed attempts.
AgentFramework
13078
NNErrorResource(%s): The last %dinvocations of the cleanprocedure have failed.
AgentFramework
13079
NNErrorAgent is calling clean forresource(%s) becausemonitor did not completewithin the expected time.
AgentFramework
13080
NNErrorAgent(%s) is exiting becauseit encountered error(%s)when truncating the lockfile(%s).
AgentFramework
13081
NNError”Resource(%s) recoveredfrom fault
AgentFramework
13082
VCS Management Pack monitoring rulesAgent Framework monitoring rules
116
Table 3-38 Agent Framework Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NNErrorTerminating the old agentfor the type(%s) withprocess-id(%s)
AgentFramework
13085
NNErrorAgent(%s) detected that apreviously started agentwith process-id(%s) for thistype is shutting down. Willterminate the old agent in(%s) seconds.
AgentFramework
13086
NNErrorAgent(%s) is exiting becauseit encountered error(%s)when reading from the lockfile(%s).
AgentFramework
13087
NNError”Agent couldnot redirect thestdin of (%s) to /dev/null
AgentFramework
13088
NNError”Agent couldnot redirect thestdout of (%s) to log file
AgentFramework
13089
NNError”Agent couldnot redirect thestderr of (%s) to log file
AgentFramework
13090
NNError”Agent(%s) could not openfile(%s) for locking
AgentFramework
13091
NNError”Agent(%s) could not obtainread lock on file (%s)
AgentFramework
13092
NNError”Agent(%s) could not obtainwrite lock on file (%s)
AgentFramework
13093
NNErrorAgent(%s) attempted tounlock file(%s) that is notlocked
AgentFramework
13094
NNErrorResource(%s) -Event(monitor) unexpectedin Detached state
AgentFramework
13095
NNErrorResource(%s) received anattr_changedcommandwithbad args
AgentFramework
13096
117VCS Management Pack monitoring rulesAgent Framework monitoring rules
Table 3-38 Agent Framework Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NNErrorEntry point attr_changedtimed out for resource(%s)
AgentFramework
13097
NNErrorResource(%s): Op(%s)timeout unexpected in (%s)state
AgentFramework
13098
NNErrorResource(%s): Op(%s)done_waiting unexpected in(%s) state.
AgentFramework
13099
NNErrorResource(%s): Attribute(%s)depends on this resourceitself.
AgentFramework
13100
NNErrorResource(%s) received amodify command with badarguments
AgentFramework
13101
NNErrorResource (%s) receivedunexpectedevent%s in state%s
AgentFramework
13102
NNErrorUnknown/Invalid minorcode (%s)
AgentFramework
13103
NNErrorAgent(%s) receivedattributecommand (%s) without typename
AgentFramework
13104
NNErrorAgent(%s) receivedattributecommand(%s) for type(%s)without attr name
AgentFramework
13105
NNErrorCannot add static attribute(%s) to unknown type name(%s)
AgentFramework
13106
NNErrorCannot delete static attr(%s)from unknown type name(%s)
AgentFramework
13107
NNErrorEngine reported error(%s)AgentFramework
13108
VCS Management Pack monitoring rulesAgent Framework monitoring rules
118
Table 3-38 Agent Framework Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NNErrorEngine reported error; errorinfo is (%s)
AgentFramework
13109
NNErrorResource name missing forcommand with minor code%s
AgentFramework
13110
NNErrorType name missing in Addresource (%s) command
AgentFramework
13111
NNErrorUnknownresourcename%sAgentFramework
13112
NNErrorUnknown/Invalid majorcode %s
AgentFramework
13113
NNErrorType name missing forcommand with minor code%s
AgentFramework
13114
NNErrorCannotmodifyattribute (%s)for unknown typename (%s)
AgentFramework
13115
NNErrorAttribute name missing incommand to modify type(%s)
AgentFramework
13116
NNErrorVCSAgMain() is alreadyactive. Agent developershould not callVCSAgMain().
AgentFramework
13117
NNErrorAgent(%s) could not openIPM connection to %s onhost %s
AgentFramework
13118
NNErrorAgent(%s) could not openIPM connection to%s on%s
AgentFramework
13119
NNErrorError receiving from theengine. Agent(%s) is exiting.
AgentFramework
13120
NNErrorAgent(%s) exiting - couldnotopen log file %s
AgentFramework
13121
119VCS Management Pack monitoring rulesAgent Framework monitoring rules
Table 3-38 Agent Framework Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NNErrorError sending to the engine.Agent(%s) is exiting.
AgentFramework
13123
NNErrorUnknown/Invalid entrypoint
AgentFramework
13124
NNError”When computing theentrypoint arguments forresource (%s)
AgentFramework
13125
NNErrorResource(%s):Attribute (%s)does not belong to thisresource
AgentFramework
13126
NNErrorUnexpected data type (%s)encountered when copyinga data list
AgentFramework
13127
NNErrorResource(%s) - unknownattribute (%s)
AgentFramework
13128
NNErrorResource(%s): Unexpecteddata type (%s) for State
AgentFramework
13129
NNErrorResource(%s): Couldnot findState attribute
AgentFramework
13130
NNErrorResource(%s): Unexpecteddata type (%s) for attribute(%s)
AgentFramework
13131
NNErrorResource %s not foundAgentFramework
13132
NNErrorCanceling thread (%s)AgentFramework
13139
NNErrorCould not find timer entrywith id %s
AgentFramework
13140
NNErrorResource name is NULLAgentFramework
13141
VCS Management Pack monitoring rulesAgent Framework monitoring rules
120
Table 3-38 Agent Framework Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NNErrorBad format(%s) in theentrypoint timeoutextension file(%s)
AgentFramework
13142
NNErrorError(%s) when readingentrypoint timeoutextension file (%s)
AgentFramework
13143
NNErrorUnexpected data type (%s)for ArgList
AgentFramework
13144
NNErrorCould not find the ArgListattribute
AgentFramework
13145
NNErrorUnexpected data type (%s)for RegList
AgentFramework
13146
NNErrorAttribute name is NULLAgentFramework
13147
NNErrorType/Resource update:NULL request
AgentFramework
13148
NNErrorType/Resource update:Message header is NULL
AgentFramework
13149
NNErrorType/Resource update:empty type/resource name
AgentFramework
13150
NNErrorType/Resource update:type/resource name is notstring
AgentFramework
13151
NNErrorType/Resource update:attribute name is NULL
AgentFramework
13152
NNErrorType/Resource update:attribute name is not STR
AgentFramework
13153
NNErrorType/Resource update:System name was specified
AgentFramework
13154
NNErrorUnexpectedminor code(%s)for attribute(%s) oftype/resource(%s)
AgentFramework
13155
121VCS Management Pack monitoring rulesAgent Framework monitoring rules
Table 3-38 Agent Framework Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NNErrorUpdate operation failed forattribute(%s) oftype/resource(%s)
AgentFramework
13156
NNErrorAssertion failed in %s line%s
AgentFramework
13157
NNErrorkill of process (%s) reportederror(%s)
AgentFramework
13158
NNErrorwaitpid for process(%s)reported error(%s)
AgentFramework
13159
NNErrorCould not find thread(%s)for canceling
AgentFramework
13160
NNErrorAttempt to cancelthread(%s) failed. Errorcode(%s)
AgentFramework
13161
NNErrorCould not create threadAgentFramework
13162
NNErrorInvalid thread cancel typerequested
AgentFramework
13170
NNErrorCouldnot set thread-specificdata
AgentFramework
13171
NNErrorCreatePipe() failed whenexecuting (%s). Error %s
AgentFramework
13172
NNErrorDuplicateHandle() failed onfirst duplication. Error %s
AgentFramework
13173
NNErrorDuplicateHandle() failed onsecondduplication. Error%s
AgentFramework
13174
NNErrorReadFile() failed witherror(%s)
AgentFramework
13175
NNError”WaitForSingleObject()returned (%s) for (%s)
AgentFramework
13176
NNError”TerminateProcess() failedfor (%s)
AgentFramework
13177
VCS Management Pack monitoring rulesAgent Framework monitoring rules
122
Table 3-38 Agent Framework Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NNError”GetExitCodeProcess() failedfor (%s)
AgentFramework
13178
NNError”CreateProcess() failed for(%s)
AgentFramework
13179
NNError”Agent(%s):WaitForMultipleObjects()failed with %s
AgentFramework
13180
NNError_beginthreadex() failedAgentFramework
13181
NNErrorCloseHandle() failedAgentFramework
13182
NNErrorAgent(%s):WaitForMultipleObjects()failed with error code %s
AgentFramework
13183
NNErrorAgent(%s):WaitForSingleObject() failedwith error code %s
AgentFramework
13184
NNErrorAgent(%s) got error(%s)when deleting file(%s)
AgentFramework
13189
NNErrorAgent(%s): file(%s) fd(%s)has bad refcount(%s)
AgentFramework
13190
NNError”Agent(%s) couldnot unlockfile(%s)
AgentFramework
13191
NNErrorWaitpid failed for script (%s)pid (%s) & errno (%s)
AgentFramework
13193
NNErrorFile (%s) does not exist ORis not executable
AgentFramework
13194
NNErrorscript (%s) stopped due tosignal (%s)
AgentFramework
13195
NNErrorscript (%s) terminated dueto signal (%s)
AgentFramework
13196
123VCS Management Pack monitoring rulesAgent Framework monitoring rules
Table 3-38 Agent Framework Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NNErrorwaitpid() returnedunexpected status(%s) forscript (%s)
AgentFramework
13197
NNErrorAgent is clearingADMIN_WAIT flag forresource(%s)
AgentFramework
13198
NNErrorAgenthas setADMIN_WAITflag for resource(%s).Administrative interventionis required.
AgentFramework
13199
NNErrorResource(%s) - unknownarg(%s) for ManageFaults
AgentFramework
13200
NNErrorResource(%s) - unknownoption (%s) forclearadminwait
AgentFramework
13201
NNErrorAgent is calling clean forresource(%s) because %ssuccessive invocationsof themonitor procedure did notcomplete within theexpected time.
AgentFramework
13210
NNErrorUCS-2 conversions are notsupported
AgentFramework
13300
NNErrorUnknownencoding type(%s)AgentFramework
13301
NNErrorAgent(%s) encounterederror(%s) when opening thefile(%s)
AgentFramework
13303
NNErrorAgent unable to create firedrill online indicator file(%s) for resource(%s).
AgentFramework
13304
NNErrorError: %sAgent is stopping.Cannot run the Info EP forthe resource(%s)
AgentFramework
13305
VCS Management Pack monitoring rulesAgent Framework monitoring rules
124
Table 3-38 Agent Framework Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NNErrorResource(%s): Failed toconvert the new value(%s)in UTF8 for attribute(%s) toOS encoding
AgentFramework
13306
NNErrorAttribute(%s) not found inthe type definition
AgentFramework
13307
NNErrorUnknown attr(%s) vtypeAgentFramework
13308
NNErrorFailed to undo_override forattr(%s) for res(%s)
AgentFramework
13309
NNErrorAttribute(%s) is not a staticoverridden attribute forres(%s). Cannotundo_override for thisattribute
AgentFramework
13310
NNErrorAttribute(%s) doesn’t existfor res(%s)
AgentFramework
13311
NNErrorAttribute(%s) not found forresource(%s)
AgentFramework
13312
NNErrorAttribute(%s) value cannotbe NULL
AgentFramework
13313
NNErrorMissing key(%s) in attribute%s in the resource(%s).Reverting to the value of thiskey in the resource type(%s).
AgentFramework
13314
NNErrorAgent(%s) could not sendconnection information tothe engine on %s
AgentFramework
13315
NNErrorError receiving connectioninformation confirmationfor Agent(%s) from theengine on %s
AgentFramework
13316
125VCS Management Pack monitoring rulesAgent Framework monitoring rules
Table 3-38 Agent Framework Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NNErrorAgent(%s) failed to sendconnection information.Server refused connection
AgentFramework
13317
NNErrorAgent(%s) received anunexpected message %s
AgentFramework
13318
NNErrorResource(%s) - info entrypoint failed with exitcode(%s)\n
AgentFramework
13319
NNErrorAgent(%s) - Noimplementationprovided forinfo entry point
AgentFramework
13320
NNErrorError executing info entrypoint for resource(%s)
AgentFramework
13321
NNErrorAgent(%s) - info entry pointnot supported for thisversion of the agent
AgentFramework
13322
NNErrorUnexpected data type (%s)for MonitorStatsParam
AgentFramework
13336
NNErrorMissing key(%s) in attribute%s. Cannot computemonitor time statistics forresources of this type(%s).
AgentFramework
13337
NNErrorEntry point info timed outfor resource(%s)
AgentFramework
13338
NNErrorInfo entry point failed forresource(%s)
AgentFramework
13339
NNErrorUnknown log severity(%s)specified
AgentFramework
13340
NNErrorAction entrypoint actiontimed out for resource(%s)
AgentFramework
13343
NNErrorResource(%s) received anoverride command with badarguments
AgentFramework
13344
VCS Management Pack monitoring rulesAgent Framework monitoring rules
126
Table 3-38 Agent Framework Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NNErrorResource(%s) received anundo_override commandwith bad arguments
AgentFramework
13345
NNErrorResource(%s): Failed toconvert arglist attribute(%s)from UTF8 to OS encoding
AgentFramework
13346
NNErrorAction entry point ofresource(%s) requested thatthe timeout be extended by(%s) seconds
AgentFramework
13347
NNErrorInfo entry point ofresource(%s) requested thatthe timeout be extended by(%s) seconds
AgentFramework
13348
NNErrorError in converting the inputstring into UCS-2 encoding.Output may be truncated
AgentFramework
13415
NNErrorError in converting the inputstring into UTF-8 encoding.Output may be truncated
AgentFramework
13416
NNErrorUpdate of ResourceInfoattribute failed forresource(%s). Key(%s) beingupdated does not exist
AgentFramework
13422
NNErrorUpdate of ResourceInfoattribute failed forresource(%s). No valuespecified for key(%s) to beadded
AgentFramework
13423
NNErrorUpdate of ResourceInfoattribute failed forresource(%s). Key(%s) to beadded already exists
AgentFramework
13455
127VCS Management Pack monitoring rulesAgent Framework monitoring rules
Table 3-38 Agent Framework Monitoring Rules (continued)
AlertEnabled
EventEnabled
SeverityRule NameModuleEvent ID
NNErrorThis encoding type(%s) isnot supported for theArgList attribute
AgentFramework
13468
NNErrorAgent (%s) exiting - failed tocreate process due to lowsystem resources (errno%s)
AgentFramework
13469
VCS Management Pack monitoring rulesAgent Framework monitoring rules
128