valves 9 - dundee bearings9... · 406 9 vale setion 9 ball valves high quality 2 piece full bore...

9Valves

Ball Valves

Safety Valves

Electrical Socket Connectors

Actuated Valves

M8 Electrical Cables

Butterfly Valves

Actuated Ball Valves

Angle Seat Valves

Wafer Butterfly Valves

Actuated Slide Valves

Safety Excess Flow Valves (Air Fuse)

Solenoid Valves Solenoid Coils

Ball Valves & Strainers

Valves Non-return Valves

404-408

413-417

424-427

444-446 447-448

431-439

449

440-443

450

414 418-422, 430 423

409 410-411 412

Associated Products

Push-in FIttings PVC HoseFlanges Red Oxide Steel Tube

302 452664 658

428-429

403

404

9Va

lves

Sect

ion

9Ball Valves

Code N27Thread BSPP

Thread Length mm

£1-9 10+

BV14FF G1/4” 46 5.58 5.02

BV38FF G3/8” 46 5.03 4.53

BV12FF G1/2” 51 5.41 4.87

BV34FF G3/4” 58 8.20 7.38

BV1FF G1” 69 12.53 11.27

BV114FF G1.1/4” 80 21.25 19.13

BV112FF G1.1/2” 94 29.91 26.92

BV2FF G2” 113 46.37 41.73

BV212FF G2.1/2” 148 91.19 82.07

BV3FF G3” 168 144.30 129.87

BV4FF G4” 206 238.13 214.32

¬ Maximum Working Temperature: 220˚C (AIR) ¬ Minimum Working Temperature: -15˚C (AIR) ¬ Suitable for Industrial, Pneumatic, Domestic and Hydraulic

Installations: Hot Water, Gasoline, Fuel, Oils, Gas-Oil, Kerosene, Gas, Acids, Compressed Air, Etc.

Full Flow Lever Ball ValveFemale x Female

Full Flow Ball ValveMale x Female

Long Thread Full Ball ValveFemale x Female

Full Flow Ball Valve for GasFemale x Female

Full Flow Ball ValveFemale x Female

Code N27Thread BSPP

Thread Length mm

£1-9 10+

BV14FF-S G1/4” 8 6.24 5.61

BV38FF-S G3/8” 10 6.21 5.59

BV12FF-S G1/2” 14.8 6.21 5.59

BV34FF-S G3/4” 18.5 8.52 7.67

BV1FF-S G1” 23.5 14.21 12.79

BV114FF-S G1.1/4” 30 22.02 19.82

BV112FF-S G1.1/2” 35 33.19 29.87

BV2FF-S G2” 45 50.16 45.14

Code N27Thread BSPP

Thread Length mm

£1-9 10+

BV12MF G1/2” 14.8 6.73 6.06

BV34MF G3/4” 18.5 9.37 8.43

BV1MF G1” 23.5 14.92 13.42

BV114MF G1.1/4” 30 22.53 20.28

BV112MF G1.1/2” 35 36.52 32.87

BV2MF G2” 45 54.65 49.18

Code N27Thread BSPP

Thread Length mm

£1-9 10+

ISOLTDBV12FF G1/2” 15 6.23 5.61

ISOLTDBV34FF G3/4” 20 8.97 8.07

ISOLTDBV1FF G1” 25 16.02 14.41

ISOLTDBV114FF G1.1/4” 32 24.78 22.30

ISOLTDBV112FF G1.1/2” 40 35.28 31.75

ISOLTDBV2FF G2” 50 57.36 51.62

Code N28Thread BSPP

Thread Length mm

£1-9 10+

GBV14FF G1/4” 45 5.95 5.36

GBV38FF G3/8” 47 5.27 4.74

GBV12FF G1/2” 56 6.60 5.94

GBV34FF G3/4” 67 9.55 8.59

GBV1FF G1” 80 16.70 15.03

GBV114FF G1.1/4” 94 25.74 23.16

GBV112FF G1.1/2” 103 39.29 35.36

GBV2FF G2” 126 60.54 54.49

¬ Steel handle

¬ Steel handle

¬ UNI EN 331

405

9

Valv

esSe

ctio

n 9

Ball Valves

Full Flow Ball Valve for GasMale x Female

T Handle Gas Ball ValveFemale x Female

3 Way L Port Ball ValveFemale x Female

3 Way T Port Ball ValveFemale x Female

T Handle Gas Ball ValveMale x Female

Full Flow Lever Ball Valve, Vented Female x Female

Code N28Thread BSPP

Thread Length mm

£1-9 10+

GBV14MF G1/4” 10 6.30 5.67

GBV38MF G3/8” 10 5.51 4.96

GBV12MF G1/2” 15 7.65 6.89

GBV34MF G3/4” 20 12.45 11.21

GBV1MF G1” 25 17.28 15.55

GBV114MF G1.1/4” 32 25.97 23.38

GBV112MF G1.1/2” 40 39.29 35.36

GBV2MF G2” 50 63.86 57.47

Code P23 Thread BSPP £BV14FFV G1/4” 17.25

BV38FFV G3/8” 17.25

BV12FFV G1/2” 19.68

BV34FFV G3/4” 36.02

BV1FFV G1” 38.25

Code N28 Thread BSPP £GBVT12FF G1/2” 8.40

GBVT34FF G3/4” 13.61

GBVT1FF G1” 21.29

Code N28 Thread BSPP £GBVT12MF G1/2” 8.70

GBVT34MF G3/4” 14.02

GBVT1MF G1” 22.19

Code N28 Thread BSPP Thread Length mm £BV3T14 G1/4” 81 44.15

BV3T38 G3/8” 81 44.15

BV3T12 G1/2” 81 44.15

BV3T34 G3/4” 92 57.29

BV3T1 G1” 108 91.68

BV3T114 G1 1/4” 118 115.43

BV3T112 G1 1/2” 140 192.74

BV3T2 G2” 164 288.08

Code N28 Thread BSPP Thread Length mm £BV3L14 G1/4” 81 44.15

BV3L38 G3/8” 81 44.15

BV3L12 G1/2” 81 44.15

BV3L34 G3/4” 92 57.29

BV3L1 G1” 108 91.68

BV3L114 G1.1/4” 118 115.43

BV3L112 G1.1/2” 140 192.74

BV3L2 G2” 164 288.08

¬ UNI EN 331

406

9Va

lves

Sect

ion

9Ball Valves

High quality 2 piece full bore ball valve with full thread, degreased for oxygen.Valves supplied individually bagged and heat sealed.

¬ Body: Nickel Plated Brass/Handle Aluminium ¬ Ball: Chromed Brass ¬ Seals: PTFE ¬ Stem Seal: NBR

Temperature Range:-20°C to +80°C

Degreased Ball Valve, BrassFemale x Female, BSPT

Code P55 Thread BSPT £BV14FF-DG R1/4” 21.36BV38FF-DG R3/8” 21.36BV12FF-DG R1/2” 26.28BV34FF-DG R3/4” 37.84BV1FF-DG R1” 57.20BV1.1/4FF-DG R1.1/4” 104.76BV1.1/2FF-DG R1.1/2” 151.60BV2FF-DG R2” 197.24BV2.1/2FF-DG R2.1/2” 470.64BV3FF-DG R3” 668.96BV4FF-DG R4” 1125.20

ISO 5211 Pad, WRAS ApprovedFemale x Female, BSPP

Full BoreISO 5211 Direct Mount

Working Temperature:-20°C to +95°C

Maximum Working Pressure:40 bar

Code P55 Thread BSPP £BV12FF-ISOP G1/2” 38.24BV34FF-ISOP G3/4” 50.48BV1FF-ISOP G1” 70.48BV1.1/4FF-ISOP G1.1/4” 113.72BV1.1/2FF-ISOP G1.1/2” 151.16BV2FF-ISOP G2” 225.92BV2.1/2IFF SOP G2.1/2” 565.08

407

9

Valv

esSe

ctio

n 9

T Handle Full Flow Ball ValveFemale x Female

T Handle Full Flow Ball ValveMale x Female

Code N27Thread BSPP

Thread Length

£1-9 10+

BVT14FF G1/4” 46 5.13 4.62

BVT38FF G3/8” 46 5.10 4.59

BVT12FF G1/2” 50 6.66 5.99

BVT34FF G3/4” 57 10.73 9.65

BVT1FF G1” 67 16.12 14.51

Code N27Thread BSPP

Thread Length

£1-9 10+

BVT14MF G1/4” 54 5.13 4.62

BVT38MF G3/8” 55 5.10 4.59

BVT12MF G1/2” 55 6.66 5.99

BVT34MF G3/4” 63 10.73 9.65

BVT1MF G1” 77 16.12 14.51

Ball Valves

Full Flow Lever Ball Valve, LockableFemale x Female

Code P24 Thread BSPP £BV14FFL G1/4” 13.42

BV38FFL G3/8” 13.42

BV12FFL G1/2” 12.20

BV34FFL G3/4” 15.88

BV1FFL G1” 21.98

Mini Ball ValveFemale x Female

Mini Ball ValveMale x Female

Code N25 Thread BSPP

£1-24 25+

MBV1FF G1/8” 3.70 3.33

MBV2FF G1/4” 3.79 3.41

MBV3FF G3/8” 3.91 3.52

MBV4FF G1/2” 6.43 5.79

MBV5FF G3/4” 8.87 7.99

Code N25 Thread BSPP

£1-24 25+

MBV1MF G1/8” 2.81 2.53

MBV2MF G1/4” 3.17 2.86

MBV3MF G3/8” 4.19 3.77

MBV4MF G1/2” 5.70 5.13

MBV5MF G3/4” 6.15 5.53

Code N06 Thread BSPP Weight kg £CSBV12FF G1/2” 0,390 25.90

CSBV34FF G3/4” 0,610 33.02

CSBV1FF G1” 0,860 42.09

CSBV114FF G1.1/4” 1,370 66.08

CSBV112FF G1.1/2” 2,040 81.00

CSBV2FF G2” 3,740 148.13

Technical Specifications ¬ Carbon steel “WCB” (investment casting) ¬ Ball and stem: Stainless steel 316 ¬ Gas thread DIN 2999. ¬ Seats: PTFE + 15% GF. 1000 wog. ¬ Temperature: -25°C + 180°C. ¬ Manually operated by handle

with locking system

3 Piece Carbon Steel Ball ValveFemale x Female

408

9Va

lves

Sect

ion

9

Dual Sealing WRAS/Gas Approved Ball ValveBSPP

Lockable, Gas Full Bore ValveBSPP

Lockable, Gas Full Bore ValveType BV76, Female x Female, Locking, BSPP

Code P55 Thread BSPP L mm £BGLFB-1 G1” 89 22.72

BGLFB-11.1/2 G1.1/2” 114 139.48

BGLFB-1 G2” 134 133.80

Code P55 Thread BSPP L mm H mm £BGLOCKBV-12 G1/2” 61 56 97.12

BGLOCKBV-34 G3/4” 68 56 72.00

BGLOCKBV-1 G1” 82 56 112.36

L

L

H

Code P55 Thread BSPP £BVWRGA-1/4 G1/4” 7.92

BVWRGA-3/8 G3/8” 7.92

BVWRGA-1/2 G1/2” 9.44

BVWRGA-3/4 G3/4” 12.76

BVWRGA-1 G1” 20.64

BVWRGA-1.1/4 G1.1/4” 37.08

BVWRGA-1.1/2 G1.1/2” 42.72

BVWRGA-2 G2” 72.72

BVWRGA-2.1/2 G2.1/2” 199.64

BVWRGA-3 G3” 265.28

BVWRGA-4 G4” 467.08

Ball Valves

Temperature Range ¬ Fluids: -20˚C to +150˚C ¬ Gas: -20˚C to +60˚C

Working Pressure ¬ 25 bar (at 25ºC)

Working Temperature: ¬ -40°C to +170°C

Maximum Working Pressure: ¬ 40 bar up to 2” ¬ 30 bar over 2”

AS4617 Limitations for GAS:

¬ 0°C to +60°C

AS4617 Limitations for GAS:

¬ 2100Kpa up to 2” ¬ 150Kpa from 2.1/2” to 4”

¬ Complete with 2 keys

¬ Manufactured in accordance to EN331 ¬ Threads to EN10226-1, ISO 228 parallel female threads ¬ Full port to DIN 3357 for maximum flow ¬ PED 97/23 CE

Quality: ¬ 24h 100% seal test guaranteed ¬ Dual sealing system allows valve to be operated in either direction, making installation easier

¬ No metal to metal moving parts ¬ Clear handle markings showing position of valve ¬ Silicone-free lubricant on all seals ¬ Blowout proof nickel-plated brass stem ¬ Two FPM o-rings at the stem for maximum safety ¬ Pure PTFE self-lubricating seals with flexible lip design

Approvals: ¬ WRAS ¬ BSI ¬ RoHS Compliant ¬ DIN-DVGW

409

9

Valv

esSe

ctio

n 9

Gate ValveBrass

Ball Valves & Strainers

Technical Specifications ¬ Working Temperature: 15 - 110˚C (Air)

0 - 90˚C (Water) ¬ Mesh Size: 400 Micron (up to 1’)

470 Micron (1.1/4” to 2”) 530 Micron (2.1/2” to 4”)

Code N56 Thread BSPP Thread Length £GV38B G3/8” 33 8.86

GV12B G1/2” 35 7.25

GV34B G3/4” 39 9.05

GV1B G1” 43 13.35

GV114B G1.1/4” 48 19.73

GV112B G1.1/2” 54 26.87

GV2B G2” 58 47.01

GV212B G2.1/2” 64 80.09

GV3B G3” 74 113.23

GV4B G4” 84 205.39

¬ Working Temperature: -15 - 150°C (Air) 0 - 125˚C (Water)

Code N56 Thread BSPP Thread Length £GV38GM G3/8” 89 11.81

GV12GM G1/2” 90 15.88

GV34GM G3/4” 105 18.14

GV1GM G1” 115 22.42

GV114GM G1.1/4” 145 38.88

GV112GM G1.1/2” 150 48.87

GV2GM G2” 180 72.72

GV212GM G2.1/2” 222 129.29

GV3GM G3” 265 156.40

GV4GM G4” 345 252.77

Heavy Duty Gate ValveGun Metal

Y StrainerBrass

Y StrainerNickel Plated Brass

Code N58 Thread BSPP £YS38B G3/8” 3.91

YS12B G1/2” 4.64

YS34B G3/4” 7.08

YS1B G1” 10.42

YS114B G1.1/4” 21.09

YS112B G1.1/2” 27.92

YS2B G2” 46.26

YS212B G2.1/2” 80.61

YS3B G3” 111.38

YS4B G4” 211.01

Code N59 Female Ports BSPP £YS12BN G1/2” 13.52

YS34BN G3/4” 19.85

YS1BN G1” 24.83

YS114BN G1.1/4” 38.53

YS112BN G1.1/2” 49.28

YS2BN G2” 109.26

410

9Va

lves

Sect

ion

9

Gate Valve - Heavy DutyType GV157, Brass, BSPP

Code P56 Thread BSPP £HDGV-38 G3/8” 7.40HDGV-12 G1/2” 6.92HDGV-34 G3/4” 10.32HDGV-1 G1” 13.72HDGV-114 G1.1/4” 21.20HDGV-112 G1.1/2” 30.48HDGV-2 G2” 44.08HDGV-212 G2.1/2” 85.00HDGV-3 G3” 103.44

NPT Full Way Ball Valve, Brass, UnplatedType BV50, Female x Female, Lever Handle, NPT

Full Flow Locking Ball ValveType BV77, Female x Female, BSPP

¬ Complete with 2 keys

Valves

Temperature Range: ¬ -20°C to +100°C

Working Pressure: ¬ 290 psi

Temperature Range: ¬ 0°C to +100°C

Working Pressure: ¬ 100 bar

Bronze Oblique Seating Stop ValveType SV73, Female x Female, BSPP

¬ SV73 is manufactured in accordance with BS5154/B - PN20

¬ PTFE Disc ¬ Cold Service: 20 bar at -10 to 100°C ¬ Saturated Steam: 9 bar at 180°C.

Code P56 Thread BSPP £ANGSV-12 G1/2” 32.44

ANGSV-34 G3/4” 42.88

ANGSV-1 G1” 125.92

ANGSV-2 G2” 167.12

Needle Valve, BrassFemale x Female, BSPP

Needle Valve, BrassMale x Male, BSPT

Code P56 Thread BSPP £NVB18-FF G1/8” 17.04

NVB14-FF G1/4” 16.52

NVB38-FF G3/8” 20.20

NVB12-FF G1/2” 25.16

Code P56 Thread NPT £BV12FFNPT 1/2” 18.88

BV34FFNPT 3/4” 20.56

Code P56 Thread BSPP £KEYBV-12 G1/2” 108.32

KEYBV-34 G3/4” 91.16

KEYBV-1 G1” 115.12

Code P56 Thread BSPP £HPTV-38 G3/8” 41.92

HPTV-12 G1/2” 47.56

HPTV-34 G3/4” 76.08

HPTV-1 G1” 81.16

Code P56 Thread BSPT £NVB18-MM R1/8” 12.60

NVB14-MM R1/4” 13.20

NVB38-MM R3/8” 32.00

NVB12-MM R1/2” 17.56 High Pressure 2 Way Valve, BrassType BV210, Female x Female, BSPP

411

9

Valv

esSe

ctio

n 9

Plastic Ball ValveHose Tail x Hose Tail

Plastic Ball ValveMale BSPP x Male BSPP

Plastic Ball ValveHose Tail x Female BSPP

Plastic Ball ValveHose Tail x Male BSPP

Plastic Push-in ValvesTube x Tube

Plastic Push-in ValvesBSPT Male x Tube

Plastic Push-in ValvesBSPP Female 90º

Plastic Push-in ValvesIn-line Mini Filter

Valves

Code S34 Hose ID mm £PBVHT-12 12 1.32

PBVHT-16 16 1.04

PBVHT-20 20 1.04

Code S34 Thread BSPP £PBVMP-1/2 1/2” 1.04

PBVMP-1/2-3/4 1/2” x 3/4” 0.80

PBVMP-3/4 3/4” 1.12

Code S34 Tube OD mm £PMFIL-6 6 6.32

PMFIL-8 8 6.64

PMFIL-10 10 9.60

PMFIL-12 12 11.96

Code S34 Tube OD mm £PBVTT-6 6 4.80

PBVTT-10 10 5.00

PBVTT-12 12 5.24

Code S34Hose ID

mmThread BSPP £

PBVFHT-16-1/2 16 1/2” 1.88

PBVFHT-16-3/4 16 3/4” 1.92

PBVFHT-20-1/2 20 1/2” 1.56

PBVFHT-20-3/4 20 3/4” 1.88

Code S34Tube

OD mmThread BSPT £

PBVTMT-6-1/4 6 1/4” 4.72

PBVTMT-10-3/8 10 3/8” 4.16

PBVTMT-12-1/2 12 1/2” 5.24

Code S34Tube

OD mmThread BSPP £

PBV90-6-1/4 6 1/4” 5.48

PBV90-10-3/8 10 3/8” 3.56

PBV90-12-1/2 12 1/2” 8.52

Code S34Hose ID

mmThread BSPP £

PBVMPHT-12-1/2 12 1/2” 1.40

PBVMPHT-12-3/4 12 3/4” 1.40

PBVMPHT-16-1/2 16 1/2” 1.04

PBVMPHT-16-3/4 16 3/4” 0.80

PBVMPHT-20-1/2 20 1/2” 0.96

PBVMPHT-20-3/4 20 3/4” 1.04

¬ Body: Polypropylene with NBR Seal ¬ Operating Pressure: 3.5 bar

¬ Body: Polypropylene with NBR Seal ¬ Operating Pressure: 3.5 bar

¬ Suitable for use in the food industry

¬ Suitable for use in the food industry

¬ Suitable for use in the food industry ¬ Temperature Range: 30˚C to 85˚C ¬ Maximum Pressure: 11 bar

FOODGRADE

✓

FOODGRADE

✓

FOODGRADE

✓

FOODGRADE

✓

412

9Va

lves

Sect

ion

9Non-return Valves

Brass Check Valve with Metal DiscFemale x Female

Filter for Check ValveMale Thread

Code N57 Thread BSPP £100CV38 G3/8” 5.43

100CV12 G1/2” 6.35

100CV34 G3/4” 11.01

100CV1 G1” 11.59

100CV114 G1.1/4” 19.52

100CV112 G1.1/2” 34.30

100CV2 G2” 42.62

100CV212 G2.1/2” 77.83

100CV3 G3” 112.56

100CV4 G4” 210.36

¬ Working Temperature: 20 - 110˚C (Air) 0 - 90˚C (Water) 20 - 60˚C (Gas)

¬ Working Temperature: 20 - 110˚C (Air) 0 - 90˚C (Water) 20 - 60˚C (Gas)

Code N57 Thread BSPP £102CVF38 G3/8” 1.33

102CVF12 G1/2” 1.48

102CVF34 G3/4” 2.00

102CVF1 G1” 2.00

102CVF114 G1.1/4” 2.46

102CVF112 G1.1/2” 3.26

102CVF2 G2” 4.40

102CVF212 G2.1/2” 6.99

102CVF3 G3” 7.92

102CVF4 G4” 10.01

Brass Swing Check Valve with Rubber SeatFemale

Code N57 Thread BSPP £130CVR12 G1/2” 6.90

130CVR34 G3/4” 9.58

130CVR1 G1” 14.91

130CVR114 G1.1/4” 23.01

130CVR112 G1.1/2” 29.04

130CVR2 G2” 38.72

130CVR212 G2.1/2” 70.44

130CVR3 G3” 93.60

130CVR4 G4” 155.44

Compact Non-return ValveMale x Female

Code P25 Seal Material Thread BSPP £VUP8.M NBR G1/8” 6.33

VUP8.VM Viton G1/8” 7.46

VUP4.M NBR G1/4” 7.22

VUP4.VM Viton G1/4” 8.34

Compact Non-return ValveFemale x Female

Code T07 Seal Material Thread BSPP £CNRVM5 NBR M5 3.96

CNRV18 NBR G1/8” 5.10

CNRV18-V Viton G1/8” 9.50

CNRV14 NBR G1/4” 5.90


CNRV38 NBR G3/8” 9.07


CNRV12 NBR G1/2” 12.56


Brass Non-return Valve, Heavy DutyFemale x Female

Code P26 Thread BSPP £392.022 G1/4” 14.62

392.023 G3/8” 18.45

392.024 G1/2” 22.81

392.025 G3/4” 38.90

392.026 G1” 56.67

413

9

Valv

esSe

ctio

n 9

Safety Valves

Hand Slide Valve with VentMale Thread

Hand Slide Valve with VentFemale Thread

Technical DataGeneral

¬ Ambient Temperature: 80˚C Max ¬ Temperature of Medium: 80˚C Max

Technical DataGeneral

¬ Pressure Range: 0 ÷ 10 bar ¬ Temperature Range: -10 ÷ 80˚C

Pneumatic ¬ Rated Pressure: Vacuum to 16 bar ¬ Nominal Flow Rate P to A: 750, 1300, 3300 ¬ Nominal Flow Rate A to R: 1300, 2100, 7600 ¬ Nominal Size: 6, 8, 13

Code P27Thread BSPP

Bmm

ØCmm

Dmm mm

Weightkg £

HSV18M G1/8” 72 26 8 14 0.090 28.68

HSV14M G1/4” 81 32 10 19 0.160 29.54

HSV12M G1/2” 98 44 12 2 0.350 38.79

Code P27Thread BSPT

Ømm

Imm

Lmm CH £

HSV18F R1/8” 25 10 48 11 7.76

HSV14F R1/4” 30 12 58 19 9.35

HSV38F R3/8” 35 12 68 22 11.71

HSV12F R1/2” 40 15 80 27 17.22

414

9Va

lves

Sect

ion

9Safety Excess Flow Valve (Air Fuse)

The safety excess flow check valve is designed to automatically shut off air flow upon a sudden break in the air line, thereby protecting personnel and property from “whipping” air hoses. Allows full unrestricted flow of air flow while in normal open position. Entire unit is corrosion free. It automatically re-sets itself after repair is made. Unit is tamper-proof. Meets OSHA safety regulations.

InstallationThe unit is to be installed on compressed air lines leading to pneumatic tools.

Technical DataSelect the same nominal size safety valve as the hose size leading to the respective air tool. Air flow must be in the direction of the arrow marked in the check valve. A safety check valve should be installed for use before each air tool. The actual length of hose from safety check valve to air tool must not exceed a certain length depending upon the inlet pressure. The volume of air flow (CFM) through an air line will vary according to its length. A longer line will offer more resistance to flow and thus reduce the volume. The length of a hose extending from the safety valve to the air tool must, therefore, be limited to a certain length to insure sufficient flow to trigger the safety valve in case of a break. Check with us for hose length limitations. The closing flow rate (CFM) at various inlet pressure can be obtained from the flow rate chart.

Safety Excess Flow Check ValvesFemale x Female

Code P22 Thread NPT £SV802 1/4” 45.53

SV803 3/8” 45.53

SV804 1/2” 45.53

CautionDo not reduce safety valve with bushings for use with a smaller air line. If this is done, there will not be a sufficient CFM flow during a line break to shut off the air flow through the safety valve (see technical data).

NoteNominal sizes of valve and connecting hose must be consistent i.e. 1/4” valve to be used with 1/4” hose.

See page 48for Whip Check Hose Safety Device

415

9

Valv

esSe

ctio

n 9

Safety Valves

Safety valves to blow out non-poisonous and non-flammable gases into the atmosphere in order to protect pressure tanks against overpressure. Please note: Only safety valves that have been set and sealed with lead (plumbed) by us can be delivered with the component symbols, it is thus absolutely necessary to indicate the setting pressure in bar. As functional test, safety valves may be aerated by the way of pulling the haul-off bolt. Repairs may only be carried out by the manufacturer.

Technical Data ¬ Connection thread: G1/4, G3/8 ¬ Max. operating pressure: 24 bar (PN24) ¬ Operating temperature: -10˚C to +150˚C ¬ Setting range: 4,5 to 24 bar (5 steps) ¬ Opening pressure difference: <10% ¬ Closing pressure difference: <10% ¬ Material: Brass ¬ Seal: Viton

Important: The supply connection to the safety valve should not be <DN6, the pressure drop in the supply connection not >3%.

Set Pressurebar

Exhaust Flow Capacity (normal condition)

m3/h l/m

6 60 1000

10 110 1833

11 125 2083

14 155 2583

Exhaust Capacity AirThe exhaust capacities indicated in the table are the minimum values reached when air pressure is raised by 10% above the set pressure.

Intermediate values can be interpolated.

Compact Safety Valve DN6Male Thread

L

Code P26Thread BSPP

Set Atbar

Dimensions mm

£L Hex

469.23-5.0BAR G1/4” 5.0 65 17 24.22

469.24-7.0BAR G1/4” 7.0 65 17 24.22

469.24-9.0BAR G1/4” 9.0 65 17 24.22

469.25-11.0BAR G1/4” 11.0 65 17 24.22

469.26-16.0BAR G1/4” 16.0 65 17 24.22

469.27-20.0BAR G1/4” 20.0 65 17 24.22

Code P26Thread BSPP

Set Atbar

Dimensions mm

£L Hex

469.33-5.0BAR G3/8” 5.0 65 19 24.22

469.34-7.0BAR G3/8” 7.0 65 19 24.22

469.34-9.0BAR G3/8” 9.0 65 19 24.22

469.35-11.0BAR G3/8” 11.0 65 19 24.22

469.36-16.0BAR G3/8” 16.0 65 19 24.22

469.37-20.0BAR G3/8” 20.0 65 19 24.22

More Variations Available

Special Set Pressures, Body Materials, Large Threads

416

9Va

lves

Sect

ion

9Safety Valves

Standard Safety Valve DN8Male Thread

Technical Data ¬ Connection thread: G1/4, G3/8, G1/2 ¬ Max. operating pressure: 40 bar (PN40) ¬ Operating temperature: -10˚C to +180˚C ¬ Setting range: 1 to 40 bar (10 steps) ¬ Opening pressure difference: < 10% ¬ Closing pressure difference: < 10%

(under 3 bar <0.3 bar) ¬ Built-in position: Vertical ¬ Material: Brass ¬ Seal: Viton




Set Pressurebar


m3/h l/m

1 23,5 3942 35,5 5924 59 9856 63 13808 106 1773

10 130 216812 154 256214 177 295716 201 335018 225 374520 248 413822 272 453325 307 512430 367 611035 426 709540 485 8080



Code P26Thread BSPP

Set Atbar

Dimensions mm

£L Hex

351.223-2.5BAR G1/4” 2.5 85 20 30.27

351.224-5.0BAR G1/4” 5.0 85 20 30.27

351.225-7.0BAR G1/4” 7.0 85 20 30.27

351.226-9.0BAR G1/4” 9.0 85 20 30.27

351.227-11.0BAR G1/4” 11.0 85 20 30.27

351.421-16.0BAR G1/4” 16.0 90 20 30.27

351.421-20.0BAR G1/4” 20.0 90 20 30.27

351.243-2.5BAR G3/8” 2.5 85 20 30.27

351.244-5.0BAR G3/8” 5.0 85 20 30.27

351.245-7.0BAR G3/8” 7.0 85 20 30.27

Code P26Thread BSPP

Set Atbar

Dimensions mm

£L Hex

351.246-9.0BAR G3/8” 9.0 85 20 30.27

351.247-11.0BAR G3/8” 11.0 85 20 30.27

351.441-16.0BAR G3/8” 16.0 90 20 31.41

351.441-20.0BAR G3/8” 20.0 90 19 31.41

351.253-2.5BAR G1/2” 2.5 87 24 31.41

351.254-5.0BAR G1/2” 5.0 87 24 31.41

351.255-7.0BAR G1/2” 7.0 87 24 31.41

351.256-9.0BAR G1/2” 9.0 87 24 31.41

351.257-11.0BAR G1/2” 11.0 87 24 31.41

351.451-16.0BAR G1/2” 16.0 92 24 32.85

351.451-20.0BAR G1/2” 20.0 92 24 32.85

L

417

9

Valv

esSe

ctio

n 9

Safety Valves

L

Code P26Thread BSPP

Set Atbar

Dimensions mm

£L Hex

351.261-2.5BAR G1/2” 2.5 120 27 47.30

351.263-5.0BAR G1/2” 5.0 120 27 47.30

351.264-7.0BAR G1/2” 7.0 120 27 47.30

351.265-9.0BAR G1/2” 9.0 120 27 47.30

351.265-11.0BAR G1/2” 11.0 120 27 47.30

351.267-16BAR G1/2” 16.0 120 27 47.30

351.267-20BAR G1/2” 20.0 120 27 47.30

Code P26Thread BSPP

Set Atbar

Dimensions mm

£L Hex

351.271-2.5BAR G3/4” 2.5 120 30 56.01

351.273-5.0BAR G3/4” 5.0 120 30 56.01

351.274-7.0BAR G3/4” 7.0 120 30 56.01

351.275-9.0BAR G3/4” 9.0 120 30 56.01

351.275-11.0BAR G3/4” 11.0 120 30 56.01

351.277-16BAR G3/4” 16.0 120 30 56.01

351.277-20BAR G3/4” 20.0 120 30 56.01

Technical Data ¬ Connection thread: G1/2”, G3/4” ¬ Max. operating pressure: 22 bar (PN22) ¬ Operating temperature: -10˚C to +180˚C ¬ Setting range: 2 to 22 bar (7 steps) ¬ Opening pressure difference: < 10% ¬ Closing pressure difference: < 10%

(under 3 bar < 0.3 bar) ¬ Built-in position: Vertical ¬ Material: Brass ¬ Seal: FKM (Viton)




Set Pressurebar


m3/h l/m

2 74,5 12424 124 20686 174 28958 223 3722

10 273 454812 323 537714 372 620316 422 703218 471 785820 521 868522 571 9513



Standard Safety Valve, DN10Male Thread

Safety valves to blow out non-poisonous and non-flammable gases into the atmosphere in order to protect pressure tanks against overpressure. Please note: Only safety valves that have been set and sealed with lead (plumbed) by us can be delivered with the component symbols, it is thus absolutely necessary to indicate the setting pressure in bar. As functional test, safety valves may be aerated by the way of pulling the haul-off bolt. Repairs may only be carried out by the manufacturer.

418

9Va

lves

Sect

ion

9

2 Way Valve 2/2 Direct Acting, Normally Closed

3 Way Valve 3/2 Direct Acting, Normally Closed

Construction ¬ Body and cover: Brass ¬ Armature tube: Stainless steel ¬ Armature & core: Stainless steel ¬ Spring: Stainless steel ¬ Seal material: NBR


Technical Specifications ¬ Maximum fluid viscosity: 25cSt (mm2/2) ¬ Ambient temperature: with class F coil -10˚ +55˚C


Code P28 Thread BSPPOrifice

mm

Differential Pressure bar Nominal Power

CoilType £

Min Max AC VA DC

AC DC Inrush Holding Watt

E106AB25/// G1/8” 2.5 0 16 14 20 15 10 2 31.39

E106BB25/// G1/4” 2.5 0 16 14 20 15 10 2 31.39

E106AB35/// G1/8” 3.5 0 10 8 20 15 10 2 31.39

E106BB35/// G1/4” 3.5 0 10 8 20 15 10 2 31.39

E106CB35/// G3/8” 3.5 0 10 8 20 15 10 2 36.49

E106DB35/// G1/2” 3.5 0 10 8 20 15 10 2 36.49

E106CB40/// G3/8” 4 0 8 5 20 15 10 2 36.49

E106DB40/// G1/2” 4 0 8 5 20 15 10 2 36.49

E106CB45/// G3/8” 4.5 0 14 13 40 30 27 5 36.49

E106DB52/// G1/2” 5.2 0 10 9 40 30 27 5 36.49

Code P28 Thread BSPP

Orificemm


CoilType £

Min Max AC VA DC

Inlet Exhaust AC DC Inrush Holding Watt

E306AB25/// G1/8” 2.5 2.4 10 10 20 15 10 2 39.18

E306BB25/// G1/4” 2.5 2.4 10 10 20 15 10 2 39.18

Select Coil & Plug from following pages


Solenoid Valves

419

9

Valv

esSe

ctio

n 9

2 Way Valve, Stainless Steel Body & EPDM Seals 2/2 Direct Acting, Normally Closed

Construction ¬ Body and cover: Stainless steel ¬ Armature tube: Stainless steel ¬ Armature & core: Stainless steel ¬ Spring: Stainless steel ¬ Seal material: EPDM


with class H coil -10˚ +80˚C


mm


Coil

£Min Max AC VA DC

AC DC Inrush Holding Watt Type Width

E111AE20/// G1/8” 2 0 12 10 12 8 6.5 3 22 47.64

E111AE25/// G1/8” 2.5 0 8 5.5 12 8 6.5 3 22 47.64

E110BE35/// G1/4” 3.5 0 10 8 20 15 10 5 30 80.58

E110BE52/// G1/4” 5.2 0 10 9 40 30 27 5 36 80.58

E110CE35/// G3/8” 3.5 0 10 8 20 15 10 5 30 87.76

E110CE52/// G3/8” 5.2 0 10 9 40 30 27 5 36 87.76

E110DE52/// G1/2” 5.2 0 10 9 40 30 27 5 36 88.89


3 Way Valve, Stainless Steel Body & EPDM Seals 3/2 Direct Acting, Normally Closed

Construction ¬ Body and cover: Stainless steel ¬ Armature tube: Stainless steel ¬ Armature & core: Stainless steel ¬ Spring: Stainless steel ¬ Seal material: EPDM

Technical Specifications ¬ Maximum allowable pressure: +10% ¬ Maximum differential pressure: +10% ¬ Maximum fluid viscosity: 25st (mm2/s) ¬ Ambient temperature: with class F coil only -10º +50ºC

with class H coil only -10º +80ºC ¬ Universial mounting ¬ Temp. Range: E311A: -10ºC +90ºC, E310B: <+40ºC

Code P28Thread BSPP

Orificemm


CoilType Seal £

Min Max AC VA DC

Inlet Exhaust AC DC Inrush Holding Watt

E311AE15/// G1/8” 1.5 1.7 0 10 10 12 8 6.5 3 EPDM 57.41

E311AE20/// G1/8” 2 1.7 0 6 6 12 8 6.5 3 EPDM 57.41

E310BE25/// G1/4” 2.5 2.4 0 10 10 20 15 10 2 EPDM 92.49


Solenoid Valves

420

9Va

lves

Sect

ion

9Solenoid Valves

General Purpose Valve 2/2 Servo Assisted, Normally Closed

General Purpose Valve 2/2 Servo Assisted, Normally Open


Construction ¬ Body and cover: Brass ¬ Armature tube: Up to 1” stainless steel

over 1” brass ¬ Armature & core: Stainless steel ¬ Spring: Stainless steel ¬ Seal material: NBR, FPM, EPDM

Technical Specifications ¬ Minimum differential pressure: 0.15 bar ¬ Maximum allowable pressure: 25 bar ¬ Maximum fluid viscosity: 25cSt (mm 2/s) ¬ Ambient temperature: with class F coil -10˚ +55˚C

with class H coil -10˚ +80˚C ¬ Preferred mounting position with vertical coil above

Code P28Thread BSPP

Orificemm

Differential Pressure bar

Nominal Power

Coil Type £AC VA DC

Min Max Inrush Holding Watt

E107CB10/// G3/8” 10 m 0.15 m 15 12 8 6.5 3 37.45

E107DB12/// G1/2” 12 0.15 15 12 8 6.5 3 46.52

E107EB18/// G3/4” 18 0.15 13 12 8 6.5 3 63.53

E107FB24/// G1” 24 0.15 10 12 8 6.5 3 98.68

E107GB38/// G1.1/4” 37 0.15 10 20 15 10 2 274.06

E107HB38/// G1.1/2” 37 0.15 10 20 15 10 2 284.08

E107IB50/// G2” 50 0.15 10 20 15 10 2 366.12

Code P28Thread BSPP

Orificemm


Nominal Power



E207CB12/// G3/8” 12 0.15 15 12 8 6.5 3 64.53

E207DB12/// G1/2” 12 0.15 15 12 8 6.5 3 65.38

E207EB18/// G3/4” 18 0.15 13 12 8 6.5 3 82.14

E207FB25/// G1” 24 0.15 10 12 8 6.5 3 119.51

E207GB37/// G1.1/4” 37 0.15 10 20 15 10 2 282.57

E207HB37/// G1.1/2” 37 0.15 10 20 15 10 2 290.95

E207IB50/// G2” 50 0.15 10 20 15 10 2 368.76



Technical Specifications ¬ Minimum differential pressure: 0.15 bar ¬ Maximum allowable pressure: 25 bar ¬ Ambient temperature: with class F coil -10˚ +55˚C

421

9

Valv

esSe

ctio

n 9

Solenoid Valves

General Purpose Valve 2/2 Assisted Lift Diaphragm, Normally Closed

Valve for Vacuum 2/2 Servo Assisted, Normally Closed

Construction ¬ Body and cover: Brass ¬ Armature tube: Stainless steel ¬ Armature & core: Stainless steel ¬ Seal material: NBR


Technical Specifications ¬ Minimum differential pressure: 0.15 bar ¬ Maximum fluid viscosity: 25cSt (mm 2/s) ¬ Ambient temperature: with class F coil -10˚ +55˚C

Technical Specifications ¬ Ambient temperature: -10˚ +55˚C

Code P28Thread BSPP

Orificemm


Coil Type £

Min

Max AC VA DC

AC DC Inrush Holding Watt

E108CB12/// G3/8” 12 0 12 10 20 15 - 5 62.08

E108DB12/// G1/2” 12 0 12 10 20 15 - 5 62.97

E108EB18/// G3/4” 18 0 9 - 40 30 - 5* 75.97

D108EB18/// G3/4” 18 0 - 7 7 - 27 5** 75.97

E108FB24/// G1” 24 0 7 - 40 30 - 5* 123.95

D108FB24/// G1” 24 0 - 4 - - 27 5** 123.95

Code P28Thread BSPP

Orificemm


Coil

£

Min

Max AC VA DC

AC DC Inrush Holding Watt Type Width

E107CB12/5/ G3/8” 10 Vacuum 15 15 12 8 6.5 3 22 54.43

E107DB12/5/ G1/2” 12 Vacuum 15 15 12 8 6.5 3 22 55.26

E107EB18/5/ G3/4” 18 Vacuum 13 13 12 8 6.5 3 22 72.27

E107FB24/5/ G1” 24 Vacuum 10 10 12 8 6.5 3 22 107.42

E107GB38/5/ G1.1/4” 37 Vacuum 10 10 20 15 10 2 30 284.15

E107HB38/5/ G1.1/2” 37 Vacuum 10 10 20 15 10 2 30 294.17

E107IB50/5/ G2” 50 Vacuum 10 10 20 15 10 2 30 376.21



*=AC only **=DC only

422

9Va

lves

Sect

ion

9

High Pressure Valve 2/2 Servo Assisted Piston, Normally Closed, 50 bar

Valve for Steam 2/2 Servo Assisted Piston, Normally Closed, 180ºC

Construction ¬ Body and cover: Brass ¬ Armature tube: Stainless steel ¬ Armature & core: Stainless steel ¬ Spring: Stainless steel ¬ Piston: Brass ¬ Piston ring: PTFE reinforced ¬ Seal material: Main seal PTFE otherwise FPM

Construction ¬ Body and cover: Brass ¬ Armature tube: Stainless steel ¬ Armature & core: Stainless steel ¬ Spring: Stainless steel ¬ Piston: Brass ¬ Piston ring: PTFE reinforced ¬ Seal material: Main seal PTFE otherwise FPM

Technical Specifications ¬ Minimum differential pressure: 1 bar ¬ Maximum allowable pressure: 60 bar ¬ Ambient temperature: with class F coil -10˚ +55˚C

Technical Specifications ¬ Minimum differential pressure: 2.5 bar ¬ Ambient temperature: with class H coil -10˚ +80˚C ¬ Preferred mounting position with vertical coil above


mm


Nominal Power



E119CV12/1/ G3/8” 12 1 50 40 30 27 5 86.62

E119DV12/1/ G1/2” 12 1 50 40 30 27 5 87.45


mm


Nominal Power



E119CW12/1/ G3/8” 12 2.5 9 20 15 10 2H 96.26

E119DW12/1/ G1/2” 12 2.5 9 20 15 10 2H 97.27



Solenoid Valves

423

9

Valv

esSe

ctio

n 9Timed Drain Valve

Female x Female

Type 2 Solenoid Coil Class “F”

Type 2 Solenoid Coil Class “H” High Temperature Applications

Solenoid Coils

Technical Data ¬ Fluid media: Air - Water - Oil ¬ Operation: 2/2 direct acting, N.C. ¬ Internal diameter: 8mm ¬ Cv value: 1.00 ¬ Max inlet pressure: 0 - 7 bar ¬ Working temperature: -5 to +80 ºC

Code S18 Thread BSPWorkingPressure

£1-9 10+

PU220i-03ST-230V G3/8” 0 - 7 bar 64.90 58.41

Code P28 Description Type £20E 230V AC 30mm Wide 2 13.59

20D 110V AC 30mm Wide 2 13.59

20B 24V AC 30mm Wide 2 13.59

201 24V DC 30mm Wide 2 13.59

200 12V DC 30mm Wide 2 13.59


22D 110V AC 30mm Wide 2 17.61

22B 24V AC 30mm Wide 2 17.61

221 24V DC 30mm Wide 2 17.61

220 12V DC 30mm Wide 2 17.61

Code M18 Type

£1-49 50+

G1NU2000 2 1.14 1.03

Electrical Socket Connector

Type 3 Solenoid Coil 22mm Coil

Type 5 Solenoid Coil 36mm Coil


30D 110V AC 22mm Wide 3 9.64

30B 24V AC 22mm Wide 3 9.64

301 24V DC 22mm Wide 3 9.64

300 12V DC 22mm Wide 3 9.64


52D 110V AC 36mm Wide 5 21.68

52B 24V AC 36mm Wide 5 21.68

521 24V DC 36mm Wide 5 21.68

520 12V DC 36mm Wide 5 21.68

Code M18 Type

£1-49 50+

M1NS2000 3 1.14 1.03

Code M18 Type

£1-49 50+

G1NU2000 5 1.14 1.03

Electrical Socket Connector Electrical Socket Connector

Features ¬ Selectable timing range ¬ 24 - 240 V AC 50/60Hz 24 - 240V DC ¬ DIN 43650 ISO-4400/6952 ¬ IP65 NEMA IV ¬ Test facility ¬ Dual earth O/P 6 & 12 o’clock. Form A ¬ Special timing ranges available on request

Electrical Timer Module IP65 NEMA IV

Code L14 On Time Off Time £720-01-000 0.5-10 Sec 0.5-45 Min 29.79

424

9Va

lves

Sect

ion

9Electrical Socket Connectors

Connector DIN43650/A Standard

Connector DIN43650/A LED & Protection Circuit

Connector DIN43650/A Moulded Cable

Code M18 Description

£1-49 50+

G1NU2000 PG9 / PG11 Black 2 Poles + Earth 1.14 1.03


£1-49 50+

G1TU2VL1 PG9 / PG11 24V 2 Poles + Earth 5.14 4.63




£1-19 20+

CG1N02000C022 2 Metres 2 Poles + Double Earth 6.81 6.13

¬ Housing colour: Black, grey ¬ Type of contact: Screw with conductor protection ¬ Contact spacing: 18mm ¬ Number of poles: 2 poles + /3 + ¬ Cable entry: PG9 / PG11 (unified)

¬ Housing colour: Transparent ¬ Type of contact: Screw with conductor protection ¬ Contact spacing: 18mm ¬ Number of poles: 2 poles + ¬ Cable entry: PG9 / PG11 (unified)

¬ Housing colour: Black ¬ Type of contact: Soldered ¬ Contact spacing: 18mm ¬ Number of poles: 2 poles + 2 ¬ Earth position: h6/h12 (ground connection)

¬ Max conductor section: 1.5mm2

¬ Fixing screw: M3 x 32.5 ¬ Profile gasket: NBR (other types upon request) ¬ Protection class: IP65 assembled ¬ Packing unit: *100 pcs with fixing screw and standard gasket


¬ Fixing screw: M3 x 32.5 ¬ Profile gasket: NBR (other types upon request) ¬ Protection class: IP65 assembled

¬ Type of cable: PVC H05VVD ¬ Cable length: 1 or 2 metres (other length upon request) ¬ Max conductor section: IP 67 with moulded cable ¬ Fixing screw: M3 x 28.7 ¬ Profile gasket: NBR (other types upon request)

425

9

Valv

esSe

ctio

n 9

Connector DIN43650/A Moulded Cable, LED & Protection Circuit

Connector DIN43650/B-Industrial Standard

Connector DIN43650/B-Industrial LED & Protection Circuit


£1-19 20+

CG1N02VL1C022 2 Metre 24V 2 Poles + Double Earth 12.57 11.31




£1-49 50+

M1NS2000 PG9 Black 2 Poles + Earth at Cable End 1.14 1.03


£1-49 50+

M1TS2VL1 PG9 24V 2 Poles + Earth 5.14 4.63



¬ Housing colour: Black ¬ Type of contact: Soldered, 18mm ¬ Number of poles: 2 poles + 2 ¬ Earth position: h6/h12 (ground connection) ¬ Type of cable: PVC H05VVD

¬ Housing colour: Black, grey ¬ Type of contact: Screw with conductor protection ¬ Contact spacing: 11mm ¬ Number of poles: 2 poles + ¬ Cable entry: PG9

¬ Housing colour: Transparent ¬ Type of contact: Screw with conductor protection ¬ Contact spacing: 11mm ¬ Number of poles: 2 poles + ¬ Cable entry: PG9

¬ Cable length: 1 or 2 metres (other length upon request) ¬ Max conductor section: 1.5 mm2

¬ Protection class: IP 67 with moulded cable ¬ Fixing screw: M3 x 28.7 ¬ Profile gasket: NBR (other types upon request)


¬ Fixing screw: M3 x 28.7 ¬ Profile gasket: NBR (other types upon request) ¬ Protection class: IP 65 assembled




426

9Va

lves

Sect

ion

9

Connector DIN43650/B-IndustrialMoulded Cabled

Connector DIN43650/B-ISO6952 Standard

Connector DIN43650/B-Industrial Moulded Cabled, LED & Protection Circuit


£1-19 20+

CM1N02000A022 2 Metre 2 Poles + Earth at Cable End 6.81 6.13

CM1N02000B022 2 Metre 2 Poles + Earth Opposite Cable End 6.81 6.13


£1-49 50+

M2NS2000 PG9 Black 2 Poles + Earth 1.14 1.03


£1-19 20+

CM1N02VL1A022 2 Metre 24V Poles + Earth at Cable End 12.57 11.31



CM1N02VL1B022 2 Metre 24V Poles + Earth Opposite End 12.57 11.31



¬ Housing colour: Black ¬ Type of contact: Soldered ¬ Contact spacing: 11mm ¬ Number of poles: 2 poles + ¬ Earth position: h6 or h12 ¬ Type of cable: PVC H05VVF

¬ Housing colour: Black, grey ¬ Type of contact: Screw with conductor protection ¬ Contact spacing: 10mm ¬ Number of poles: 2 poles + ¬ Cable entry: PG9

¬ Housing colour: Black ¬ Type of contact: Soldered ¬ Contact spacing: 11mm ¬ Number of poles: 2 poles + ¬ Earth position: h6 or h12 ¬ Type of cable: PVC H05VVF

¬ Cable length: 1 or 2 metres (other length upon request) ¬ Max conductor section: 1.5mm2

¬ Protection class: IP 67 with moulded cables ¬ Fixing screw: M3 x 28.7 ¬ Profile gasket: NBR (other types upon request)



¬ Cable length: 1 or 2 metres (other length upon request) ¬ Max conductor section: 1.5mm2

¬ Protection class: IP 67 with moulded cables ¬ Fixing screw: M3 x 28.7 ¬ Profile gasket: NBR (other types upon request)


427

9

Valv

esSe

ctio

n 9


Connector DIN43650/B-ISO6952 LED & Protection Circuit

Connector DIN43650/C Standard


£1-49 50+





£1-49 50+

P1NZ3000 PG7 Black 3 Poles + Earth 1.33 1.20

¬ Housing colour: Transparent ¬ Type of contact: Screw with conductor protection ¬ Contact spacing: 10mm ¬ Number of poles: 2 poles + ¬ Cable entry: PG9

¬ Housing colour: Black, grey ¬ Type of contact: Screw with conductor protection ¬ Contact spacing: 9.4mm ¬ Number of poles: 3 poles + ¬ Cable entry: PG7





428

9Va

lves

Sect

ion

9M8 Electrical Cables


£1-9 10+

08FD3A1Z Female 3-Pole 1 metre cable 7.10 6.39

08FD4A1Z Female 4-Pole 1 metre cable 8.62 7.76

08MD3A1Z Male 3-Pole 1 metre cable 7.62 6.86

08MD4A1Z Male 4-Pole 1 metre cable 8.76 7.89


£1-9 10+

08FA3A1Z Female 3-Pole 1 metre cable 7.10 6.39

08FA4A1Z Female 4-Pole 1 metre cable 8.62 7.76

08MA3A1Z Male 3-Pole 1 metre cable 8.57 7.71

08MA4A1Z Male 4-Pole 1 metre cable 10.10 9.09

Temperature Range ¬ -25˚C to +70˚C

Environmental Conditions ¬ Protection class (IEC 60529): IP 67

Technical Data ¬ Rated voltage: 60V AC/DC ¬ Rated current: 4A

Material ¬ Contact material: Phosphorous bronze ¬ Contact surface material: Nickel + 0,45µm, AU gold plated ¬ Housing material: Nylon 6 + 30% glass fibre ¬ Coupling nut material: An AI/NI ¬ O-Ring: NBR



Technical Data ¬ Rated voltage: 60V AC/DC ¬ Rated current: 4A


Product Description ¬ M8 male/female connector with cable, 3/4 poles, ¬ angled 90˚/Straight 180˚ ¬ Type of contact: male/female ¬ Number of contacts: 3/4 poles ¬ Cable material: PUR ¬ Cable colour: black ¬ Cable length: 1 metre ¬ Conductor size: 0.25 mm2

¬ Standard: IEC 61076-2-101. (Ed, 1) / IEC 60947-5-2 ¬ Housing colour: black

Product Description ¬ M8 male/female connector with cable, 3/4 poles, ¬ angled 90˚/Straight 180˚ ¬ Type of contact: male/female ¬ Number of contacts: 3/4 poles ¬ Cable material: PUR ¬ Cable colour: black ¬ Cable length: 1 metre ¬ Conductor size: 0.25 mm2

¬ Standard: IEC 61076-2-101. (Ed, 1) / IEC 60947-5-2 ¬ Housing colour: black

M8 Electrical Connector with PVC CableStraight

M8 Electrical Connector with PVC CableAngled

429

9

Valv

esSe

ctio

n 9

M8 Electrical Cables


£1-9 10+

08FD3C1Z Female 3-Pole 1 metre cable 7.67 6.90

08FD4C1Z Female 4-Pole 1 metre cable 9.43 8.49

08MD3C1Z Male 3-Pole 1 metre cable 8.14 7.33

08MD4C1Z Male 4-Pole 1 metre cable 9.52 8.57




Product Description ¬ Extension M8 male and M8 female connector with PVC 0.25mm2 moulded cable or shielded

¬ Number of poles: 3/4 ¬ Operating voltage: 60V AC/DC ¬ Operating current: 4A ¬ Max. conductor size: 0.25 mm2

¬ Pin dimension: 1mm

M8 Electrical Connector with PUR CableStraight


£1-9 10+

08FA3C1Z Female 3-Pole 1 metre cable 7.67 6.90

08FA4C1Z Female 4-Pole 1 metre cable 9.43 8.49

08MA3C1Z Male 3-Pole 1 metre cable 9.14 8.23

08MA4C1Z Male 4-Pole 1 metre cable 10.91 9.81




Product Description ¬ Extension M8 male and M8 female connector with PVC

0.25mm2 moulded cable or shielded ¬ Number of poles: 3/4 ¬ Operating voltage: 60V AC/DC ¬ Operating current: 4A ¬ Max. conductor size: 0.25 mm2

¬ Pin dimension: 1mm

M8 Electrical Connector with PUR CableAngled

430

9Va

lves

Sect

ion

9Solenoid Valves

ZS Series 2/2 Solenoid Valve Brass Body NBR Seals

ZS Series 2/2 Solenoid Valve Stainless Steel Body Viton Seals

¬ Suitable for use on air, gas, hot water and oil applications ¬ Normally closed ¬ Comes complete with solenoid coil and plug

¬ Suitable for use on air, gas, hot water and oil applications ¬ Normally closed ¬ Comes complete with solenoid coil and plug

Code N44ThreadBSPP

Orificemm

CVValue

Minpressure

Max Working PressureMax

TempC

Power

Voltage

£VA WAir, Gas Water, Hot Water, Liquid Light Oil

AC DCAC DC AC DC AC DC 1-9 10+220 24V

ZS15E2-10L G1/2” 10 1.9 0 20 16 20 16 20 16 80 22 13 220V AC 42.98 38.68

ZS15E1-10L G1/2” 10 1.9 0 20 16 20 16 20 16 80 22 13 110V AC 42.98 38.68

ZS15E4-10L G1/2” 10 1.9 0 20 16 20 16 20 16 80 22 13 24V DC 42.98 38.68

ZS15E7-10L G1/2” 10 1.9 0 20 16 20 16 20 16 80 22 13 24V AC 42.98 38.68

ZS20E2 G3/4” 20 7.6 0 10 6 10 6 7 4 80 33 20 220V AC 60.81 54.73

ZS20E1 G3/4” 20 7.6 0 10 6 10 6 7 4 80 33 20 110V AC 60.81 54.73

ZS20E4 G3/4” 20 7.6 0 10 6 10 6 7 4 80 33 20 24V DC 60.81 54.73

ZS20E7 G3/4” 20 7.6 0 10 6 10 6 7 4 80 33 20 24V AC 60.81 54.73

ZS25E2 G1” 25 12 0 10 6 10 6 7 4 80 33 20 220V AC 89.25 80.33

ZS25E1-25L G1” 25 12 0 10 6 10 6 7 4 80 33 20 110V AC 89.25 80.33

ZS25E4 G1” 25 12 0 10 6 10 6 7 4 80 33 20 24V DC 89.25 80.33

ZS25E7 G1” 25 12 0 10 6 10 6 7 4 80 33 20 24V AC 89.25 80.33

Code N45ThreadBSPP

Orificemm

CVValue

Minpressure

Max Working PressureMax

TempC

Power

Voltage

£VA WAir, Gas Water, Hot Water, Liquid Light Oil

AC DCAC DC AC DC AC DC 1-9 10+220 24V

ZS15VE2-10LS2 G1/2” 10 1.9 0 20 16 20 16 20 16 80 22 13 220V AC 69.44 62.49

ZS15VE1-10LS2 G1/2” 10 1.9 0 20 16 20 16 20 16 80 22 13 110V AC 69.44 62.49

ZS15VE4-10LS2 G1/2” 10 1.9 0 20 16 20 16 20 16 80 22 13 24V DC 82.06 73.86

ZS15VE7-10LS2 G1/2” 10 1.9 0 20 16 20 16 20 16 80 22 13 24V AC 69.44 62.49

ZS20VE2S2 G3/4” 20 7.6 0 10 6 10 6 7 4 80 33 20 220V AC 72.72 65.45

ZS20VE1S2 G3/4” 20 7.6 0 10 6 10 6 7 4 80 33 20 110V AC 72.72 65.45

ZS20VE4S2 G3/4” 20 7.6 0 10 6 10 6 7 4 80 33 20 24V DC 72.72 65.45

ZS20VE7S2 G3/4” 20 7.6 0 10 6 10 6 7 4 80 33 20 24V AC 72.72 65.45

ZS25VE2S2 G1” 25 12 0 10 6 10 6 7 4 80 33 20 220V AC 104.48 94.03

ZS25VE1-25LS2 G1” 25 12 0 10 6 10 6 7 4 80 33 20 110V AC 104.48 94.03

ZS25VE4S2 G1” 25 12 0 10 6 10 6 7 4 80 33 20 24V DC 104.48 94.03

ZS25VE7S2 G1” 25 12 0 10 6 10 6 7 4 80 33 20 24V AC 104.48 94.03

¬ Direct acting - no minimum pressure ¬ Rated IP 65

¬ Direct acting - no minimum pressure ¬ Rated IP 65

TM

431

9

Valv

esSe

ctio

n 9


Code S40 Thread BSPP DN £TMDA14E G1/4" 8 211.73

TMDA38E G3/8" 10 211.73

TMDA12E G1/2" 15 195.76

TMDA34E G3/4" 20 204.64

TMDA1E G1" 25 223.21

TMDA114E G1.1/4" 32 261.14

TMDA112E G1.1/2" 40 304.17

TMDA2E G2" 50 376.07

TMDA212E G2.1/2" 65 752.71

TMDA3E G3" 80 824.08

¬ Brass Nickel Plated ¬ Full Bore ¬ Direct Mount

Maximum Working Pressure: ¬ 40 bar up to 2” 30 bar 2.1/2” & 3”

Actuated Brass Ball ValveDouble Acting, Pneumatic Actuator

Code S40 Thread BSPP DN £TMSA14E G1/4" 8 235.93

TMSA38E G3/8" 10 235.93

TMSA12E G1/2" 15 220.00

TMSA34E G3/4" 20 228.89

TMSA1E G1" 25 247.46

TMSA114E G1.1/4" 32 285.38

TMSA112E G1.1/2" 40 366.48

TMSA2E G2" 50 438.37

TMSA212E G2.1/2" 65 1089.13

TMSA3E G3" 80 1138.54

Actuated Brass Ball ValveSingle Acting, Pneumatic Actuator

Code S40 Thread BSPP DN £TME2014E G1/4" 8 557.60

TME2038E G3/8" 10 557.60

TME2012E G1/2" 15 543.08

TME2034E G3/4" 20 551.16

TME201E G1" 25 568.04

TME20114E G1.1/4" 32 602.52

TME20112E G1.1/2" 40 646.44

TME202E G2" 50 711.80

TME140212E G2.1/2" 65 1759.48

TME1403E G3" 80 1824.36

Actuated Brass Ball ValveElectric High Voltage (85-220V AC/DC)

Code S40 Thread BSPP DN £TMEL2014E G1/4" 8 557.60

TMEL2038E G3/8" 10 557.60

TMEL2012E G1/2" 15 543.08

TMEL2034E G3/4" 20 551.16

TMEL201E G1" 25 568.04

TMEL20114E G1.1/4" 32 602.52

TMEL20112E G1.1/2" 40 646.44

TMEL202E G2" 50 711.80

TMEL140212E G2.1/2" 65 1759.48

TMEL1403E G3" 80 1824.36

Actuated Brass Ball ValveElectric Low Voltage (24V AC/DC)

Working Temperature: ¬ 0°C to 80°C


TM

432

9Va

lves

Sect

ion

9Actuated Ball Valves

Code S40 Thread BSPP DN £TMDA14L G1/4" 8 233.90

TMDA38L G3/8" 10 233.90

TMDA12L G1/2" 15 233.90

TMDA34L G3/4" 20 256.87

TMDA1L G1" 25 274.47

TMDA114L G1.1/4" 32 437.89

TMDA112L G1.1/2" 40 527.82

TMDA2L G2" 50 625.24

¬ Brass Nickel Plated ¬ Full Bore ¬ 3 Way L Port

Maximum Working Pressure: ¬ 40 bar up to 1.1/4” 25 bar 1.1/2” & 2”

Actuated Brass Ball Valve, 3 WayDouble Acting, Pneumatic Actuator, L Port

Code S40 Thread BSPP DN £TMSA14L G1/4" 8 258.10

TMSA38L G3/8" 10 258.10

TMSA12L G1/2" 15 258.10

TMSA34L G3/4" 20 281.07

TMSA1L G1" 25 304.00

TMSA114L G1.1/4" 32 500.19

TMSA112L G1.1/2" 40 676.46

TMSA2L G2" 50 773.87

Actuated Brass Ball Valve, 3 WaySingle Acting, Pneumatic Actuator, L Port

Code S40 Thread BSPP DN £TME2014L G1/4" 8 635.54

TME2038L G3/8" 10 635.54

TME2012L G1/2" 15 635.54

TME2034L G3/4" 20 658.50

TME201L G1" 25 681.43

TME35114L G1.1/4" 32 945.08

TME35112L G1.1/2" 40 977.94

TME352L G2" 50 1263.77

Actuated Brass Ball Valve, 3 WayElectric High Voltage (85-220V AC/DC), L Port

Code S40 Thread BSPP DN £TMEL2014L G1/4" 8 635.54

TMEL2038L G3/8" 10 635.54

TMEL2012L G1/2" 15 635.54

TMEL2034L G3/4" 20 658.50

TMEL201L G1" 25 681.43

TMEL35114L G1.1/4" 32 945.08

TMEL35112L G1.1/2" 40 977.94

TMEL352L G2" 50 1263.77

Actuated Brass Ball Valve, 3 WayElectric Low Voltage (24V AC/DC), L Port



TM

433

9

Valv

esSe

ctio

n 9


Code S40 Thread BSPP DN £TMDA14T G1/4" 8 233.90

TMDA38T G3/8" 10 233.90

TMDA12T G1/2" 15 233.90

TMDA34T G3/4" 20 256.87

TMDA1T G1" 25 274.47

TMDA114T G1.1/4" 32 437.89

TMDA112T G1.1/2" 40 527.82

TMDA2T G2" 50 625.24

¬ Brass Nickel Plated ¬ Full Bore ¬ 3 Way T Port

Maximum Working Pressure: ¬ 40 bar up to 1.1/4” 25 bar 1.1/2” & 2”

Actuated Brass Ball Valve, 3 WayDouble Acting, Pneumatic Actuator, T Port

Code S40 Thread BSPP DN £TMSA14T G1/4" 8 258.10

TMSA38T G3/8" 10 258.10

TMSA12T G1/2" 15 258.10

TMSA34T G3/4" 20 281.07

TMSA1T G1" 25 304.00

TMSA114T G1.1/4" 32 500.19

TMSA112T G1.1/2" 40 676.46

TMSA2T G2" 50 773.87

Actuated Brass Ball Valve, 3 WaySingle Acting, Pneumatic Actuator, T Port

Code S40 Thread BSPP DN £TMEL2014T G1/4" 8 635.54

TMEL2038T G3/8" 10 635.54

TMEL2012T G1/2" 15 635.54

TMEL2034T G3/4" 20 658.50

TMEL201T G1" 25 681.43

TMEL35114T G1.1/4" 32 945.08

TMEL35112T G1.1/2" 40 977.94

TMEL352T G2" 50 1263.77

Actuated Brass Ball Valve, 3 WayElectric High Voltage (85-220V AC/DC), T Port

Code S40 Thread BSPP DN £TME2014T G1/4" 8 635.54

TME2038T G3/8" 10 577.76

TME2012T G1/2" 15 635.54

TME2034T G3/4" 20 658.50

TME201T G1" 25 681.43

TME35114T G1.1/4" 32 945.08

TME35112T G1.1/2" 40 977.94

TME352T G2" 50 1263.77

Actuated Brass Ball Valve, 3 WayElectric Low Voltage (24V AC/DC), T Port



TM

434

9Va

lves

Sect

ion


Code S40 Thread BSPP DN £TMDA14SS2 G1/4" 8 268.58

TMDA38SS2 G3/8" 10 268.58

TMDA12SS2 G1/2" 15 231.44

TMDA34SS2 G3/4" 20 249.52

TMDA1SS2 G1" 25 267.48

TMDA114SS2 G1.1/4" 32 322.26

TMDA112SS2 G1.1/2" 40 468.42

TMDA2SS2 G2" 50 574.20

¬ Stainless Steel ¬ 2 Piece ¬ Full Bore

Maximum Working Pressure: ¬ 63 bar (1000psi)

Actuated, Stainless Steel, Direct Mount Ball Valve, 2 PieceDouble Acting, Pneumatic Actuator

Code S40 Thread BSPP DN £TMSA14SS2 G1/4" 8 292.60

TMSA38SS2 G3/8" 10 292.60

TMSA12SS2 G1/2" 15 255.68

TMSA34SS2 G3/4" 20 273.77

TMSA1SS2 G1" 25 329.78

TMSA114SS2 G1.1/4" 32 435.73

TMSA112SS2 G1.1/2" 40 524.83

TMSA2SS2 G2" 50 709.28

Actuated, Stainless Steel, Direct Mount Ball Valve, 2 PieceSingle Acting, Pneumatic Actuator

Code S40 Thread BSPP DN £TME2014SS G1/4" 8 670.21

TME2038SS2 G3/8" 10 670.21

TME2034SS2 G1/2" 15 633.12

TME3034SS2 G3/4" 20 651.16

TME201SS2 G1" 25 674.39

TME20114SS2 G1.1/4" 32 729.21

TME35112SS2 G1.1/2" 40 918.54

TME552SS2 G2" 50 1197.68

Actuated, Stainless Steel, Direct Mount Ball Valve, 2 PieceElectric High Voltage (85-220V AC/DC)

Code S40 Thread BSPP DN £TME20114SS2 G1/4" 8 729.21

TMEL2038SS2 G3/8" 10 670.21

TMEL2012SS2 G1/2" 15 633.12

TMEL2034SS2 G3/4" 20 651.16

TMEL201SS2 G1" 25 674.39

TMEL20114SS2 G1.1/4" 32 729.21

TMEL35112SS2 G1.1/2" 40 918.54

TMEL552SS2 G2" 50 1197.68

Actuated, Stainless Steel, Direct Mount Ball Valve, 2 PieceElectric Low Voltage (24V AC/DC)



TM

435

9

Valv

esSe

ctio

n 9


Code S40 Thread BSPP DN £TMDA14SS G1/4" 8 269.63

TMDA38SS G3/8" 10 269.63

TMDA12SS G1/2" 15 239.85

TMDA34SS G3/4" 20 249.78

TMDA1SS G1" 25 283.68

TMDA114S G1.1/4" 32 353.53

TMDA112SS G1.1/2" 40 482.94

TMDA2SS G2" 50 595.25

TMDA212SS G2.1/2" 65 964.32

TMDA3SS G3" 80 1162.85

TMDA4SS G4" 100 1887.11

¬ Stainless Steel ¬ 3 Piece ¬ Full Bore

Maximum Working Pressure: ¬ 63 Bar (1000psi)

Actuated, Stainless Steel, Direct Mount Ball Valve, 3 PieceDouble Acting, Pneumatic Actuator

Code S40 Thread BSPP DN £TMSA14SS G1/4" 8 293.87

TMSA38SS G3/8" 10 293.87

TMSA12SS G1/2" 15 264.09

TMSA34SS G3/4" 20 312.08

TMSA1SS G1" 25 345.98

TMSA114SS G1.1/4" 32 467.00

TMSA112SS G1.1/2" 40 631.58

TMSA2SS G2" 50 730.36

TMSA212SS G2.1/2" 65 1300.76

TMSA3SS G3" 80 1499.29

TMSA4SS G4" 100 2563.74

Actuated, Stainless Steel, Direct Mount Ball Valve, 3 PieceSingle Acting, Pneumatic Actuator

Code S40 Thread BSPP DN £TMEL2014SS G1/4" 8 671.27

TMEL2038SS G3/8" 10 671.27

TME2012SS G1/2" 15 641.49

TME2034SS G3/4" 20 656.70

TME201SS G1" 25 690.60

TME35114SS G1.1/4" 32 860.72

TME35112SS G1.1/2" 40 933.05

TME552SS G2" 50 1218.76

TME140212SS G2.1/2" 65 2147.05

TME1403SS G3" 80 2345.58

TME3004SS G4" 100 3143.21

Actuated, Stainless Steel, Direct Mount Ball Valve, 3 PieceElectric Low Voltage (24V AC/DC)

Code S40 Thread BSPP DN £TME2014SS G1/4" 8 670.21

TME2038SS G3/8" 10 671.27

TME2012SS G1/2" 15 641.49

TME2034SS G3/4" 20 656.70

TME201SS G1" 25 690.60

TME35114SS G1.1/4" 32 860.72

TME35112SS G1.1/2" 40 933.05

TME552SS G2" 50 1218.76

TME140212SS G2.1/2" 65 2147.05

TME1403SS G3" 80 2345.58

TME3004SS G4" 100 3143.21



Actuated, Stainless Steel, Direct Mount Ball Valve, 3 PieceElectric High Voltage (85-220V AC/DC)

TM

436

9Va

lves

Sect

ion


Code S40 Thread BSPP DN £TMDA14SSL G1/4" 8 311.94

TMDA38SSL G3/8" 10 311.94

TMDA12SSL G1/2" 15 327.10

TMDA34SSL G3/4" 20 387.73

TMDA1SSL G1" 25 504.37

TMDA114SSL G1.1/4" 32 597.82

TMDA112SSL G1.1/2" 40 764.10

TMDA2SSL G2" 50 981.10

¬ Stainless Steel ¬ 3 Way L Port


Actuated, Stainless Steel, Direct Mount Ball ValveDouble Acting, Pneumatic Actuator, 3 Way L Port

Code S40 Thread BSPP DN £TMSA14SSL G1/4" 8 368.58

TMSA38SSL G3/8" 10 368.58

TMSA12SSL G1/2" 15 383.74

TMSA34SSL G3/4" 20 444.37

TMSA1SSL G1" 25 555.63

TMSA114SSL G1.1/4" 32 732.94

TMSA112SSL G1.1/2" 40 886.93

TMSA2SSL G2" 50 1177.23

Actuated, Stainless Steel, Direct Mount Ball ValveSingle Acting, Pneumatic Actuator, 3 Way L Port

Code S40 Thread BSPP DN £TME2014SSL G1/4" 8 681.86

TME2038SSL G3/8" 10 681.86

TME2012SSL G1/2" 15 697.03

TME2034SSL G3/4" 20 757.65

TME351SSL G1" 25 913.56

TME35114SSL G1.1/4" 32 1007.01

TME44112SSL G1.1/2" 40 1330.93

TME852SSL G2" 50 1877.49

Actuated, Stainless Steel, Direct Mount Ball ValveElectric High Voltage (85-220V AC/DC), 3 Way L Port

Code S40 Thread BSPP DN £TMEL2014SSL G1/4" 8 681.86

TMEL2038SSL G3/8" 10 681.86

TMEL2012SSL G1/2" 15 697.03

TMEL2034SSL G3/4" 20 757.65

TMEL351SSL G1" 25 913.56

TMEL35114SSL G1.1/4" 32 1007.01

TMEL55112SSL G1.1/2" 40 1330.93

TMEL852SSL G2" 50 1877.49

Actuated, Stainless Steel, Direct Mount Ball ValveElectric Low Voltage (24V AC/DC), 3 Way L Port



TM

437

9

Valv

esSe

ctio

n 9


Code S40 Thread BSPP DN £TMDA14SST G1/4" 8 311.94

TMDA38SST G3/8" 10 311.94

TMDA12SST G1/2" 15 327.10

TMDA34SST G3/4" 20 387.73

TMDA1SST G1" 25 504.37

TMDA114SST G1.1/4" 32 597.82

TMDA112SST G1.1/2" 40 764.10

TMDA2SST G2" 50 981.10

¬ Stainless Steel ¬ 3 Way T Port


Actuated, Stainless Steel, Direct Mount Ball ValveDouble Acting, Pneumatic Actuator, 3 Way T Port

Code S40 Thread BSPP DN £TMSA14SST G1/4" 8 368.58

TMSA38SST G3/8" 10 368.58

TMSA12SST G1/2" 15 383.74

TMSA34SST G3/4" 20 444.37

TMSA1SST G1" 25 555.63

TMSA114SST G1.1/4" 32 732.94

TMSA112SST G1.1/2" 40 886.93

TMSA2SST G2" 50 1177.23

Actuated, Stainless Steel, Direct Mount Ball ValveSingle Acting, Pneumatic Actuator, 3 Way T Port

Code S40 Thread BSPP DN £TME14SST G1/4" 8 681.86

TMEL38SST G3/8" 10 681.86

TME20SST G1/2" 15 697.03

TME2034SST G3/4" 20 757.65

TME351SST G1" 25 913.56

TME35114SST G1.1/4" 32 1007.01

TME55112SST G1.1/2" 40 1330.93

TME85SST G2" 50 1877.49

Actuated, Stainless Steel, Direct Mount Ball ValveElectric High Voltage (85-220V AC/DC), 3 Way T Port

Code S40 Thread BSPP DN £TMEL2014SST G1/4" 8 681.86

TMEL2038SST G3/8" 10 681.86

TMEL12SST G1/2" 15 697.03

TMEL2034SST G3/4" 20 757.65

TMEL351SST G1" 25 913.56

TMEL35114SST G1.1/4" 32 1007.01

TMEL55112SST G1.1/2" 40 1330.93

TMEL852SST G2" 50 1877.49

Actuated, Stainless Steel, Direct Mount Ball ValveElectric Low Voltage (24V AC/DC), 3 Way T Port



TM

438

9Va

lves

Sect

ion


Code S40 Thread BSPP DN £TMDA12SSANSI150 1/2" 15 358.23

TMDA34SSANSI150 3/4" 20 395.98

TMDA1SSANSI150 1" 25 444.19

TMDA112SSANSI150 1.1/2" 40 744.04

TMDA2SSANSI150 2" 50 867.59

TMDA212SSANSI150 2.1/2" 65 1330.38

TMDA3SSANSI150 3" 80 1580.55

TMDA4SSANSI150 4" 100 2428.25

TMDA6SSANSI150 6" 150 5632.00

TMDA8SSANSI150 8" 200 10689.08

¬ Stainless Steel ¬ Full Bore ¬ Direct Mount

Maximum Working Pressure: ¬ 20 bar

ANSI150 Flanged, Stainless Steel, Ball ValveDouble Acting, Pneumatic Actuator


Code S40 Thread BSPP DN £TMSA12SSANSI150 1/2" 15 382.47

TMSA34SSANSI150 3/4" 20 420.22

TMSA1SSANSI150 1" 25 506.49

TMSA112SSANSI150 1.1/2" 40 800.43

TMSA2SSANSI150 2" 50 1017.70

TMSA212SSANSI150 2.1/2" 65 1429.86

TMSA3SSANSI150 3" 80 1680.03

TMSA4SSANSI150 4" 100 2528.36

TMSA6SSANSI150 6" 150 6261.59

TMSA8SSANSI150 8" 200 11701.99

ANSI150 Flanged, Stainless Steel, Ball ValveSingle Acting, Pneumatic Actuator

Code S40 Thread BSPP DN £TMEHV2020D08 1/2" 15 759.87

TMEHV2020D12 3/4" 20 797.62

TMEHV2020D16 1" 25 851.11

TMEHV2020D24 1.1/2" 40 1194.15

TMEHV2020D32 2" 50 1317.70

TMEHV2020D40 2.1/2" 65 1918.26

TMEHV2020D48 3" 80 2168.43

TMEHC2020D64 4" 100 3298.65

ANSI150 Flanged, Stainless Steel, Ball ValveElectric High Voltage (85-220V AC/DC)


Code S40 Thread BSPP DN £TMELV2020D08 1/2" 15 759.87

TMELV2020D12 3/4" 20 797.62

TMELV2020D16 1" 25 851.11

TMELV2020D24 1.1/2" 40 1194.15

TMELV2020D32 2" 50 1317.70

TMELV2020D40 2.1/2" 65 1918.26

TMELV2020D48 3" 80 2168.43

TMELV2020D64 4" 100 3298.65

ANSI150 Flanged, Stainless Steel, Ball ValveElectric Low Voltage (24V AC/DC)

TM

439

9

Valv

esSe

ctio

n 9


Code S40 Thread BSPP DN £TMDA12SSPN16 G1/2" 15 424.71

TMDA34SSPN16 G3/4" 20 478.67

TMDA1SSPN16 G1" 25 532.79

TMDA114SSPN16 G1.1/4" 32 717.96

TMDA112SSPN16 G1.1/2" 40 962.90

TMDA2SSPN16 G2" 50 981.64

TMDA212SSPN16 G2.1/2" 65 1139.99

TMDA3SSPN16 G3" 80 1637.89

TMDA4SSPN16 G4" 100 2272.55

TMDA5SSPN16 G5" 125 4627.53

TMDA6SSPN16 G6" 150 6032.65

TMDA8SSPN16 G8" 200 12253.01

¬ Stainless Steel ¬ Full Bore ¬ Direct Mount

Maximum Working Pressure: ¬ 40 bar up to 2” 16 bar over 2”

Actuated PN16 Flanged, Stainless Steel, Ball ValveDouble Acting, Pneumatic Actuator


Code S40 Thread BSPP DN £TMSA12SSPN16 G1/2" 15 448.94

TMSA34SSPN16 G3/4" 20 502.90

TMSA1SSPN16 G1" 25 595.09

TMSA114SSPN16 G1.1/4" 32 780.26

TMSA112SSPN16 G1.1/2" 40 1019.29

TMSA2SSPN16 G2" 50 1131.75

TMSA212SSPN16 G2.1/2" 65 1239.46

TMSA3SSPN16 G3" 80 1737.37

TMSA4SSPN16 G4" 100 2372.66

TMSA5SSPN16 G5" 125 4700.03

TMSA6SSPN16 G6" 150 6662.23

TMSA8SSPN16 G8" 200 13265.93

Actuated PN16 Flanged, Stainless Steel, Ball ValveSingle Acting, Pneumatic Actuator

Code S40 Thread BSPP DN £TMEHV2019D08 G1/2" 15 826.34

TMEH2019D12 G3/4" 20 880.31

TMEHV2019D16 G1" 25 939.71

TMEHV2019D20 G1.1/4" 32 1124.88

TMEHV2019D24 G1.1/2" 40 1413.01

TMEHV2019D32 G2" 50 1431.75

TMEHV2019D40 G2.1/2" 65 1727.86

TMEHV2019D48 G3" 80 2225.77

TMEHV2019D64 G4" 100 3142.94

TMEHV2019D80 G5" 125 5279.50

Actuated PN16 Flanged, Stainless Steel, Ball ValveElectric High Voltage (85-220V AC/DC)


Code S40 Thread BSPP DN £TMELV2019D08 G1/2" 15 751.24

TMELV2019D12 G3/4" 20 800.28

TMELV2019D16 G1" 25 854.28

TMELV2019D20 G1.1/4" 32 1022.61

TMELV2019D24 G1.1/2" 40 1284.55

TMELV2019D32 G2" 50 1301.59

TMELV2019D40 G2.1/2" 65 1570.78

TMELV2019D48 G3" 80 2023.42

TMELV2019D64 G4" 100 2857.22

TMELV2019D80 G5" 125 4799.54

Actuated PN16 Flanged, Stainless Steel, Ball ValveElectric Low Voltage (24V AC/DC)

TM

440

9Va

lves

Sect

ion

9Wafer Butterfly Valves

Wafer Butterfly Valves ¬ Cast Iron Body, Stainless Steel Disc, NBR Liner, Lockable Lever ¬ Suitable for mounting between Flanges: BS10 Table D/E,

PN6/10/16 and ANSI150

Working Temperature: ¬ -20°C to 80°C


Cast Iron Body, Stainless Steel Disc, NBR LinerLever Operated

Cast Iron Body, Stainless Steel Disc, NBR LinerGear Operated

Code S40 Size DNFace to Face

mm £BFWL112-NBR 1.1/2" 40 33 94.56

BFWL2-NBR 2" 40 43 94.56

BFWL212-NBR 2.1/2" 40 46 111.14

BFWL3-NBR 3" 40 46 123.95

BFWL4-NBR 4" 40 52 177.45

BFWL5-NBR 5" 40 56 203.63

BFWL6-NBR 6" 40 56 333.43

BFWL8-NBR 8" 40 60 501.91

BFWL10-NBR 10" 40 68 880.35


mm £BFVW9112-NBR 1.1/2" 40 33 173.76

BFVW92-NBR 2" 50 43 173.76

BFVW9212-NBR 2.1/2" 65 46 190.34

BFVW93-NBR 3" 80 46 203.02

BFVW94-NBR 4" 100 52 256.65

BFVW95-NBR 5" 125 56 326.83

BFVW96-NBR 6" 150 56 473.35

BFVW98-NBR 8" 200 60 641.83

BFVW910-NBR 10" 250 68 1020.27

BFVW912-NBR 12" 300 78 1422.87

BFVW914-NBR 14" 350 78 2438.70

BFVW916-NBR 16" 400 87 3897.70

BFVW918-NBR 18" 450 114 4790.32

BFVW920-NBR 20" 500 127 6141.26

BFVW924-NBR 24" 600 154 8696.12

TM

441

9

Valv

esSe

ctio

n 9

Wafer Butterfly Valves ¬ Cast Iron Body, Stainless Steel Disc, NBR Liner, Lockable Lever ¬ Suitable for mounting between Flanges: BS10 Table D/E,




Cast Iron Body, Stainless Steel Disc, NBR LinerPneumatic Double Acting

Cast Iron Body, Stainless Steel Disc, NBR LinerElectric Actuated, Low Voltage (12-24V AC/DC)

Cast Iron Body, Stainless Steel Disc, NBR LinerPneumatic Single Acting

Cast Iron Body, Stainless Steel Disc, NBR LinerElectric Actuated, High Voltage (85-230V AC/DC)


mm £BFVWA112-NBR 1.1/2" 40 33 261.93

BFVWA2-NBR 2" 50 43 261.93

BFVWA212-NBR 2.1/2" 65 46 335.59

BFVWA3-NBR 3" 80 46 348.26

BFVWA4-NBR 4" 100 52 416.90

BFVWA5-NBR 5" 125 56 522.72

BFVWA6-NBR 6" 150 56 646.18

BFVWA8-NBR 8" 200 60 1010.24

BFVWA10-NBR 10" 250 68 1388.68

BFVWA12-NBR 12" 300 78 2395.27


mm £BFVWEA112-NBRLV 1.1/2" 40 33 668.84

BFVWEA2-NBRLV 2" 50 43 668.84

BFVWEA212-NBRLV 2.1/2" 65 46 785.71

BFVWEA3-NBRLV 3" 80 46 986.74

BFVWEA4-NBRLV 4" 100 52 1402.94

BFVWEA5-NBRLV 5" 125 56 1748.43

BFVWEA6-NBRLV 6" 150 56 1834.23

BFVWEA8-NBRLV 8" 200 60 2118.38


mm £BFVWSA112-NBR 1.1/2" 40 33 324.24

BFVWS2-NBR 2" 50 43 324.24

BFVWSA212-NBR 2.1/2" 65 46 391.95

BFVWSA3-NBR 3" 80 46 496.89

BFVWSA4-NBR 4" 100 52 552.02

BFVWSA5-NBR 5" 125 56 708.09

BFVWSA6-NBR 6" 150 56 987.93

BFVWSA8-NBR 8" 200 60 1546.82

BFVWSA10-NBR 10" 250 68 2999.74

BFVWSA12-NBR 12" 300 78 4223.52


mm £BFVWEA112-NBRHV 1.1/2" 40 33 668.84

BFVWEA2-NBRHV 2" 50 43 668.84

BFVWEA212-NBRHV 2.1/2" 65 46 785.71

BFVWEA3-NBRHV 3" 80 46 986.74

BFVWEA4-NBRHV 4" 100 52 1402.94

BFVWEA5-NBRHV 5" 125 56 1748.43

BFVWEA6-NBRHV 6" 150 56 1834.23

BFVWEA8-NBRHV 8" 200 60 2118.38

Wafer Butterfly Valves TM

442

9Va

lves

Sect

ion

9

Wafer Butterfly Valves ¬ Cast Iron Body, Stainless Steel Disc, EPDM Liner, Lockable Lever ¬ Suitable for mounting between Flanges: BS10 Table D/E,




Cast Iron Body, Stainless Steel Disc, EPDM LinerLever Operated

Cast Iron Body, Stainless Steel Disc, EPDM LinerGear Operated


mm £BFVWL112-EPDM 1.1/2" 40 33 85.96

BFVWL2-EPDM 2" 50 43 85.96

BFVWL212-EPDM 2.1/2" 65 46 101.04

BFVWL3-EPDM 3" 80 46 112.68

BFVWL4-EPDM 4" 100 52 161.32

BFVWL5-EPDM 5" 125 56 185.12

BFVWL6-EPDM 6" 150 56 303.12

BFVWL8-EPDM 8" 200 60 456.28

BFVWL10-EPDM 10" 250 68 800.32


mm £BFVWG112-EPDM 1.1/2" 40 33 157.96

BFVWG2-EPDM 2" 50 43 157.96

BFVWG212-EPDM 2.1/2" 65 46 173.04

BFVWG3-EPDM 3" 80 46 184.56

BFVWG4-EPDM 4" 100 52 233.32

BFVWG5-EPDM 5" 125 56 297.12

BFVWG6-EPDM 6" 150 56 430.32

BFVWG8-EPDM 8" 200 60 583.48

BFVWG10-EPDM 10" 250 68 927.52

BFVWG12-EPDM 12" 300 78 1293.52

BFVWG14-EPDM 14" 350 78 2217.00

BFVWG16-EPDM 16" 400 87 3543.36

BFVWG18-EPDM 18" 450 114 4354.84

BFVWG20-EPDM 20" 500 127 5582.96

BFVWG24-EPDM 24" 600 154 7905.56


443

9

Valv

esSe

ctio

n 9

Cast Iron Body, Stainless Steel Disc, EPDM LinerPneumatic Double Acting

Cast Iron Body, Stainless Steel Disc, EPDM LinerPneumatic Single Acting


mm £BFVWDA112-EPDM 1.1/2" 40 33 238.12

BFVWDA2-EPDM 2" 50 43 238.12

BFVWDA22-EPDM 2.1/2" 65 46 305.08

BFVWDA3-EPDM 3" 80 46 316.60

BFVWDA4-EPDM 4" 100 52 379.00

BFVWDA5-EPDM 5" 125 56 475.20

BFVWDA6-EPDM 6" 150 56 587.44

BFVWDA8-EPDM 8" 200 60 918.40

BFVWDA10-EPDM 10" 250 68 1262.44

BFVWDA12-EPDM 12" 300 78 2177.52


mm £BFVWSA112-EPDM 1.1/2" 40 33 294.76

BFVWSA2-EPDM 2" 50 43 294.76

BFVWSA212-EPDM 2.1/2" 65 46 356.32

BFVWSA3-EPDM 3" 80 46 451.72

BFVWSA4-EPDM 4" 100 52 501.84

BFVWSA5-EPDM 5" 125 56 643.72

BFVWSA6-EPDM 6" 150 56 898.12

BFVWSA8-EPDM 8" 200 60 1406.20

BFVWSA10-EPDM 10" 250 68 2727.04

BFVWSA12-EPDM 12" 300 78 3839.56

Wafer Butterfly Valves ¬ Cast Iron Body, Stainless Steel Disc, EPDM Liner, Lockable Lever ¬ Suitable for mounting between Flanges: BS10 Table D/E,




Cast Iron Body, Stainless Steel Disc, EPDM LinerElectric Actuated, Low Voltage (12-24V AC/DC)

Cast Iron Body, Stainless Steel Disc, EPDM LinerElectric Actuated, High Voltage (85-230V AC/DC)


mm £BFVWEA112-EPDMLV 1.1/2" 40 33 608.04

BFVWEA2-EPDMLV 2" 50 43 608.04

BFVWEA212-EPDMLV 2.1/2" 65 46 714.28

BFVWEA3-EPDMLV 3" 80 46 897.04

BFVWEA4-EPDMLV 4" 100 52 1275.40

BFVWEA5-EPDMLV 5" 125 56 1589.48

BFVWEA6-EPDMLV 6" 150 56 1667.48

BFVWEA8-EPDMLV 8" 200 60 1925.80


mm £BFVWEA112-EPDMHV 1.1/2" 40 33 608.04

BFVWEA2-EPDMHV 2" 50 43 608.04

BFVWEA212-EPDMHV 2.1/2" 65 46 714.28

BFVWEA3-EPDMHV 3" 80 46 897.04

BFVWEA4-EPDMHV 4" 100 52 1275.40

BFVWEA5-EPDMHV 5" 125 56 1589.48

BFVWEA6-EPDMHV 6" 150 56 1667.48

BFVWEA8-EPDMHV 8" 200 60 1925.80


444

9Va

lves

Sect

ion

9Actuated Valves

Valve Features ¬ The valve is suitable for medium

pressures on condition that non aggressive fluids are used

¬ Working temperature: from -20˚C to +150˚C for fluids

¬ Fluid range: air, water, oil, gas, petroliferous and petrochemical products, vacuum

¬ Threaded ends as per UNI/ISO 7/1 Rp specifications

¬ Head of the valve as per ISO 5211 specifications

NOTE: in spring return version valves are mounted in normally closed position; please specify, if other position are required.

Actuator Features ¬ Rotation angle: 90˚ ¬ Temperature from 0˚C to +80˚C; from

-20˚C to +80˚C with dry air only ¬ Air supply: 5,6 bar, maximum working

supply 8,4 bar ¬ Operating media: dry filtered air, not

necessary lubricated. In case of lubricated air, either non detergent oil or NBR-compatible oil must be used

¬ Automatic closing in a clockwise direction (for spring return version)

Valve Materials1) Shaft: Brass2) O-Ring: FKM3) Gland Nut: Brass4) Shaft Seal: P.T.F.E.5) Antifriction Rings: P.T.F.E.6) Seals: P.T.F.E.7) Ball: Brass chromium plated8) Body: Brass9) Threaded End: BrassSurface treatment: bright nickel plating

Code P46DNmm

ThreadBSP

Amm

B mm

Cmm

Dmm

Emm

ØGmm

KVm3/h

Hmm

Weightkg £

S101H003 10 3/8” 221 55 60 20 69 31.8 11 110 1.52 174.22

S101H004 15 1/2” 221 55 60 20 69 31.8 20 110 1.5 174.87

S101H005 20 3/4” 221 55 60 20 77 40 60 117 1.64 181.37

S101H006 25 1” 221 55 60 20 89 48 100 121 1.88 188.52

S101H007 32 1.1/4” 240 65 70 20 103 60 130 141 2.97 227.52

S101H008 40 1.1/2” 240 65 70 20 114 70.6 170 148 3.39 245.08

S101H009 50 2” 294 72 77.2 20 134 86.5 280 162.5 5.42 335.44

Actuators

Type Suits

SR 15 DN 10 - DN 25 Valves


SR 45 DN 50 Valves

Actuated Ball Valve, Nickel PlatedBrass Body Single Acting

445

9

Valv

esSe

ctio

n 9

Actuated Valves

Valve Features ¬ The valve is suitable for medium

pressures on condition that non aggressive fluids are used

¬ Working temperature: from -20˚C to +150˚C for fluids

¬ Fluid range: air, water, oil, gas, petroliferous and petrochemical products, vacuum

¬ Threaded ends as per UNI/ISO 7/1 Rp specifications

¬ Head of the valve as per ISO 5211 specifications

NOTE: in spring return version valves are mounted in normally closed position; please specify, if other position are required.






Valve Materials1) Shaft: Brass2) O-Ring: FKM3) Gland Nut: Brass4) Shaft Seal: P.T.F.E.5) Antifriction Rings: P.T.F.E.6) Seals: P.T.F.E.7) Ball: Brass chromium plated8) Body: Brass9) Threaded End: BrassSurface treatment: bright nickel plating

Code P46DNmm

ThreadBSP

Amm

B mm

Cmm

Dmm

Emm

ØGmm

KVm3/h

Hmm

Weightkg £

D101H004 15 1/2” 70 43.2 42.7 15 69 31,8 20 88 0.59 113.11

D101H005 20 3/4” 114 48 52 20 77 40 60 103.5 1.09 143.02

D101H006 25 1” 114 48 52 20 89 48 100 107.5 1.33 150.17

D101H007 32 1.1/4” 130 55 60 20 103 60 130 131 2.03 174.22

D101H008 40 1.1/2” 130 55 60 20 114 70.6 170 138 2.45 191.77

D101H009 50 2” 144 60 65.7 20 134 86.5 280 150.7 4.64 236.63

D101H010 65 2.1/2” 168.5 72 77.5 20 161 111 510 180.5 6.5 404.99

D101H011 80 3” 184 80.5 86.5 30 185 136.5 770 211 10.3 548.66

Actuators

Type Suits

DA 8 DN 15 Valves

DA 15 DN 20 - DN 25 Valves

DA 30 DN 32 - DN 40 Valves

DA 45 DN 50 Valves

DA 90 DN 65 Valves

DA 120 DN 80 Valves

Actuated Ball Valve, Nickel PlatedBrass Body Double Acting

446

9Va

lves

Sect

ion

9

Valve Features ¬ Suitable for medium pressure

applications. ¬ Working temperature: from -20˚C to

+150˚C for fluids ¬ Working pressure: see diagram ¬ Fluid range: air, water, oil, gas,

petroliferous and petrochemical products, aggressive media.

¬ Surface threaded ends as per UNI/ ISO 7/1 Rp specificationsNOTE: in spring return version valves are mounted in normally closed position; please specify, if other position are required.






Valve Materials1) Shaft: AISI 3162) Nut holder: AISI 3043) Lock nut: AISI 3044) Spring: AISI 3015) Washer: AISI 3046) Gland nut ring: AISI 3047) Static ring: P.T.F.E.8) End: AISI 3169) Seals: P.T.F.E.10) Ball: AISI 31611) O-Ring: FKM12) Bottom tight ring: P.T.F.E.13) Body with female end: AISI 31614) Top Sealing: P.T.F.E.

Code P46DNmm

ThreadBSP

Amm

B mm

Cmm

Dmm

Emm

ØGmm

Hmm

Weightkg £

S401H003 10 G3/8” 221 55 60 20 50 29 141.5 1.7 260.68

S401H004 15 G1/2” 221 55 60 20 60 34 145.5 1.8 309.52

S401H005 20 3/4” 240 65 70 20 70 42.5 162.5 2.6 330.24

S401H006 25 G1” 240 65 70 20 85 50.5 166.5 2.9 352.99

S401A007 32 G1.1/4” 294 72 78 20 95 63 183 3.7 445.95

S401H008 40 G1.1/2” 320 80 86 30 105 75.5 207 5.4 514.86

S401A009 50 G2” 357 90 96 30 125 891 234 7.7 676.07

Actuators

Type Suits



SR 45 DN 32 Valves

SR 60 DN 40 Valves

SR 90 DN 50 Valves

Actuated Ball ValveStainless Steel Body Single Acting

Namur Interface PlateFor Actuated Ball Valves

Actuated Valves

Code P46 To Suit Actuator £KBN10008 DA 8 15.60

KBN10015 DA 15 18.65

KBN17030 DA 30 - DA 45 SR 15 - SR 90

18.65

447

9

Valv

esSe

ctio

n 9

Butterfly Valves

Wafer Type Butterfly Valve, ManualEPDM Liner

Wafer Type Butterfly Valve, Double Acting, Pneumatically ActuatedEPDM Liner

Code P48DNmm

Amm

Bmm

Cmm £

L375XE69 50 166 63 90 73.26

L375XE70 65 220 75 90 85.46

L375XE71 80 220 75 90 91.28

L375XE72 100 220 75 90 115.70

L375XE73 125 350 86 90 167.44

L375XE74 150 350 86 90 183.14

L375XE75 200 350 86 90 271.51

Code P48DNmm

Lmm

Hmm

Weight kg

ActuatorSize £

D375XE69 50 168 242 4 DA 30 183.14

D375XE70 65 182 260 4.8 DA 45 204.07

D375XE71 80 182 267 5 DA 45 209.88

D375XE72 100 190 290 6.5 DA 60 248.25

D375XE73 125 225 310 9.1 DA 90 304.07

D375XE74 150 240 342 11.5 DA 120 334.88

D375XE75 200 314 397 18.7 DA 240 545.34

Wafer Type Butterfly Valve, Single Acting, Pneumatically ActuatedEPDM Liner

Code P48DNmm

Lmm

Hmm

Weight kg

ActuatorSize £

S375XE69 50 240 252 5 SR 30 225.58

S375XE70 65 294 272 6.1 SR 45 280.23

S375XE71 80 294 279 6.3 SR 45 286.04

S375XE72 100 320 316 8.5 SR 60 326.74

S375XE73 125 357 339 11.9 SR 90 459.30

S375XE74 150 368 362 15.4 SR 120 563.37

S375XE75 200 456 421 24.4 SR 240 830.22

Lug Type Butterfly Valve, ManualEPDM Liner

Code P48DNmm

Amm

Bmm

Cmm £

L385XE69 50 166 63 90 83.72

L385XE70 65 220 75 90 96.51

L385XE71 80 220 75 90 105.23

L385XE72 100 220 75 90 136.63

L385XE73 125 350 86 90 191.86

L385XE74 150 350 86 90 218.02

L385XE75 200 350 86 90 291.86

448

9Va

lves

Sect

ion

9Butterfly Valves

Lug Type Butterfly Valve, Double Acting, Pneumatically ActuatedEPDM Liner

Code P48DNmm

Lmm

Hmm

Weight kg

ActuatorSize £

D385XE69 50 168 242 4.4 DA 30 193.02

D385XE70 65 182 260 5.4 DA 45 215.11

D385XE71 80 182 267 6.2 DA 45 223.83

D385XE72 100 190 290 6.9 DA 60 269.76

D385XE73 125 225 310 11.5 DA 90 328.48

D385XE74 150 240 342 14.4 DA 120 369.76

D385XE75 200 314 397 21.9 DA 240 565.69

Lug Type Butterfly Valve, Single Acting, Pneumatically ActuatedEPDM Liner

Code P48DNmm

Lmm

Hmm

Weight kg

ActuatorSize £

S385XE69 50 168 242 4.4 DA 30 235.46

S385XE70 65 182 260 5.4 DA 45 291.28

S385XE71 80 182 267 6.2 DA 45 300.00

S385XE72 100 190 290 6.9 DA 60 348.25

S385XE73 125 225 310 11.5 DA 90 483.72

S385XE74 150 240 342 14.4 DA 120 598.25

S385XE75 200 314 397 21.9 DA 240 784.88

See page 171for Namur Interface Solenoid Valve

449

9

Valv

esSe

ctio

n 9

Actuated Valves

Zeus Angle Seat ValveBronze Body Water-Hammer Free

Code P20DNmm

ThreadBSPP Actuator

Amm

Cmm

Dmm

ØEmm

Fmm CH.L. £

J9SPG1603 15 G3/8” DN 50 163 153 44 70 65 27 128.71

J9SPG1604 15 G1/2” DN 50 163 153 44 70 65 27 129.36

J9SPG1605 20 G3/4” DN 50 173 163 44 70 75 27.5 133.91

J9SPG1805 20 G3/4” DN 63 191 181 50.5 84.4 75 27.5 166.42

J9SPG1806 20 G1” DN 63 206 196 50.5 84.4 90 41 184.62

J9SPG2106 25 G1” DN 90 246 236 66.2 116.4 90 41 251.58

J9SPG2107 32 G1.1/4” DN 90 255 245 66.2 116.4 110 50 273.68

J9SPG2108 40 G1.1/2” DN 90 270 264 66.2 116.4 120 58 333.16

J9SPG2309 50 G2” DN 90 280 275 77.4 116.4 150 70 422.55

Zeus Angle Seat ValveBronze Body with Flow from Above Seat

Code P20DNmm

ThreadBSPP Actuator

Amm

Cmm

Dmm

ØEmm

Fmm CH.L. £

J9CPG1603 15 G3/8” DN 50 163 153 44 70 65 27 121.56

J9CPG1604 15 G1/2” DN 50 163 153 44 70 65 27 195.25

J9CPG1605 20 G3/4” DN 40** 173 163 44 70 75 27,5 128.71

J9CPG1806 25 G1” DN 63 206 196 50.5 84.4 90 41 173.57

J9CPG2107 32 G1.1/4” DN 90 255 245 66.2 116.4 110 50 254.83

J9CPG2108 40 G1.1/2” DN 90 270 264 66.2 116.4 120 58 274.98

J9CPG2109 50 G2” DN 110 316 311 77.4 140.6 100 70 334.14

450

9Va

lves

Sect

ion

9Actuated Valves

VIP Valve, Double ActingBrass with NBR Seals

VIP Valve, Single ActingBrass with NBR Seals

Code P47 Thread BSPP Bore £VDA10003 G3/8” 10 90.12

VDA10004 G1/2” 15 102.68

VDA10005 G3/4” 20 105.31

VDA10006 G1” 25 118.31

VDA10007 G1.1/4” 32 157.97

VDA10008 G1.1/2” 40 223.09

VDA10009 G2” 50 310.26

Code P47 Thread BSPP Bore £VNC10003 G3/8” 10 94.56

VNC10004 G1/2” 15 106.38

VNC10005 G3/4” 20 126.32

VNC10006 G1” 25 124.16

VNC10007 G1.1/4” 32 191.33

VNC10008 G1.1/2” 40 238.61

VNC10009 G2” 50 330.21

VIP Actuated Slide ValvesA VIP valve (patented by OMAL exclusively) is a proper automatic valve embodying both interception device (between pipe C-D) and control device (A-B). It works thanks to the internal movement of a piston supplied with air. At the end of its stroke (a VIP valve is an ON/OFF valve), the piston presses on the seat seal or moves away from it letting the intercepted fluid pressures discharge on it, the pressure necessary to move the piston is completely independent of the fluid pressure. As a result OMAL has been able to design a light space saving and lasting valve. Its full bore and its improved internal dynamics allow minimum pressure losses, too.Improved fluid dynamics allow minimum pressure losses. See Flow Pressure Diagram. VIP valves can be used in any mounting position. They can be provided with seals in NBR, FKM or EPDM:

Control media: ¬ Filtered compressed air, not necessarily lubricated. ¬ At temperatures from -20˚C to 0˚C, use dry air.

In case of lubricated air, seal compatible oil must be used. ¬ Air supply: 3 bar min. - 8 bar max. in Double Acting execution.

4.2 bar min. - 8 bar max. in Spring Return execution.

Operating media: ¬ Pressure: 10 bar max. ¬ Temperature: from -20˚C to +80˚C (NBR)

from -20˚C to +150˚C (FKM) from -20˚C to +150˚C (EPDM)

¬ Vacuum tightness: 740 mm Hg

valves 9 - dundee bearings9... · 406 9 vale setion 9 ball valves high quality 2 piece full bore...

Documents