ball valves - dhvvalvefoundry.com valve a2-05.pdf · 8 = small size ball valves 9 = top entry...

Ball Valves

Catalogue No: A2-05

DHV Industries, Inc.3451 Pegasus Driver Bakersfield. CA 93308 U.S.A.

Call Toll Free: (877) DHV-USA1

Phone: (661) 392-8948 Fax: (661) 392-8947

E-mail: [email protected]

Website: www.dhvindustries.com

DHV Valve Company Inc.10810 W. Little York, Suite 120 Houston, TX. 77041 U.S.A.

Phone: (713) 983-6046 Fax: (713) 983-9076


Website: www.dhvvalve.com

Seeking a Great Name in Valve Technology

Your local DHV agent

Please visit our DHV website: www.dhvindustries.com or www.dhvvalve.com for a copy of our API 6D

monogram certificate. Customer and Project referrals are available upon request. For certified data

and current specifications, please contact us or your local DHV agent. Information provided in this

catalog is for general purposes only.

DHV reserves the right to discontinue the manufacture or change and modify our design and construc-

tion of any DHV product, in due course of our manufacturing procedure without incurring any obligation

to accept for credit, to replace or furnish or install such changes or modifications on products previously

or subsequently sold.

DHV Industries, Inc.3451 Pegasus Drive

Bakersfield, CA 93308 U.S.A.


Phone: (661) 392-8948

Fax: (661) 392-8947



DHV Valve Company Inc.10810 W. Little York, Suite 120

Houston, TX. 77041 U.S.A.

Phone: (713) 983-6046

Fax: (713) 983-9076



DHV Industries, Inc.DHV Industries, Inc.

• DHV Figure Numbers ·································································································· 2

• Floating Ball Valves ···································································································· 3

One-piece Body Ball Valves ····················································································· 3

Two-piece Body Ball Valves ···················································································· 5

Small Size Ball Valves ···························································································· 7

• Three Way Ball Valves ································································································ 10

• Trunnion Mounted Ball Valves ················································································· 11

Two-Piece Cast Steel Body Ball Valves ······································································ 12

Three-Piece Forged Steel Body Ball Valves ····························································· 19

Side Entry Type SE-1 ··························································································· 19


One-piece Cast Steel Body Top Entry Ball Valves ················································ 30

• Fully Welded Ball Valves ·························································································· 36

• Rising Stem Ball Valves ··························································································· 39

• Terms & Conditions ·································································································· 42

Table of Contents

1

Introduction

Terms & Conditions

QuotationAll prices are F.O.B. shipping point unless otherwise agreed or specified in the quotation. Prices are valid

only for the duration indicated in the quotation and are subject to change without notice. Prices also do

not include any federal, state or local taxes or other government charges.

Design changesWe reserve the right to institute changes in material ,design and specification without notice.

Cancellation or changesOrders placed with us are not subject to cancellation or changes without our prior consent. A cancellation

charge or a price adjustment will be applicable unless otherwise agreed.

DeliveryWe will not be responsible for delays or failure to deliver due to causes beyond our control.Delivery of

material to a common carrier shall be considered delivery to the Buyer .Claims for loss or any damage to

material in transit shall be filed by the Buyer direct with the carrier. Claims for any shortage, corrections

or deductions must be made in writing within 10 days after receipt of goods.

Return of goodsAny return of goods will not be accepted without our prior authorization.Return goods should be of our

manufacture, in clean and salable condition. A minimum charge of 35 Percent of the invoice price will be

made to cover the cost of handling and reconditioning. The freight for return goods shall be prepaid by

Buyer.

Limited warrantyDHV Industries,Inc. warrants to the original Buyer, not any third party, for products of our manufacture,

for a period of one year after date of shipment, that its products will be free from defects in materials and

workmanship under proper and normal use.

Any claim for defect goods should be by written notice to DHV Industries,Inc. immediately upon discovery.

NO warranty shall apply to our product which has been modified or changed in design or function,

misused, or improperly maintained. DHV Industries,Inc.shall be able to inspect claimed defects at origi-

nal buyer’s facility to determine its obligation.Without authorization of DHV Industries,Inc. any repair

labor or material is not allowed. No goods may be returned without permission from DHV Industries,Inc.

This warranty does not extend beyond original sale price and does not extend to any claim for labor.

Consequential damages, losses,whether directly or indirectly suffered or in any other manner relating to

the defects.

42

Quality is our commitment, while competitive price and timely delivery is our promise.

From the beginning, the DHV name has become associated with quality in every step of our

manufacturing process. For the past decades our customers worldwide have trusted us to pro-

vide them with consistent and reliable valve products in their most severe and critical service.

We at DHV are proud of our ability to meet the stringent requirements of Refining, Gas/Oil, Pipeline,

Petrochemical and Power Plant.

DHV Ball Valves are designed, manufactured and tested to the latest manufacturing specifica-

tions of the American & International Standards Organizations. We welcome your challenges and

look forward to serving your critical project needs.


DHV Figure Numbers

2

Examp le :8 ˝ -B5601F13-GO

8˝ Ball Valve, Trunnion Ball,Three - Piece Body, Full Bore, Class600LB, A105 Body & Adapter RaisedFace Flanged End, with A105 + ENPTrim and Nylon + Viton / GraphiteSeat and Seal, Gear Operated.

Type 1 = Floating Ball Split Body,

Full Bore 2 = Floating Ball Split Body, Reduced Bore

3 = Trunnion Ball Two-Piece Body, Full Bore 4 = Trunnion Ball Two-Piece Body,

Reduced Bore 5 = Trunnion Ball Three-Piece Body, Full Bore

6 =Trunnion Ball Three-Piece Body, Reduced Bore 7 = Floating Ball One-Piece Body,

Reduced Bore 8 = Small Size Ball Valves 9 = Top Entry Trunnion Ball Valves

0 = Three Way Ball Valves A = Metal-to-Metal Seat Ball Valves C = Full Welded Body Ball Valves

D = Rising Stem Ball Valves, Full Bore E = Rising Stem Ball Valves, Reduced Bore X = Special

Pressure Class 15 = Class 150

30 = Class 300

60 = Class 600

90 = Class 900

150 = Class 1500

250 = Class 2500

10 = 1000 WOG

20 = 2000 WOG

30 = 3000 WOGCode C = Cast Steel Valves

F = Forged Steel Valves

I = Cast Iron Valves

B = Ball Valves

End ConnectionsF = Raised Face Flanged End

R = Ring Type Joint Flanged End

P = Plain Flat Face Flanged End

B = Butt-welded End

T = Threaded End

S = Socked-Welded End

X = Other Type End Connection

Trim Material 1 = C.S. +ENP

2 = 304SS

3 = 316SS

4 = 13Cr / F6

5 = Duplex S.S.

6 = Monel

7 = Inconel

8 = B16

9 = B62

0 = S.S.+T.C

A = S.S.+SFNi

B = S.S.+HCr

C = Super Duplex S.S.

X = Special

Seat Material1 = PTFE

2 = R-PTFE

3 = NYLON

4 = VITON

5 = DEVLON

6 = NBR

7 = PEEK (HT4)

8 = SFNi

9 = STL

A = HCr

B = T.C

M = NYLON-M

X = Special

OperatorNONE = Lever or Handwheel

Operator

CO = Chain Wheel Operator

GO = Gear Operator

BS = Bare Stem

EM = Electric Motor Operator

PA = Pneumatic Actuator

HA = Hydraulic Actuator

PH = Pneumatic-Hydraulic

Actuator

Body Material 0 = ASTM A216 WCB

1 = ASTM A105

2 = ASTM A352 LCB

3 = ASTM A350 LF2

4 = ASTM A351 CF8M

5 = ASTM A182 F316

6 = ASTM A351 CF8

7 = ASTM A182 F304

8 = ASTM A890 4A

9 = ASTM A182 F51

A = ASTM A352 LCC

B = Inconel

C = Monel

D = Super Duplex S.S.

X = Special

Ball Valves

Rising Stem Ball ValvesOne-Piece, Cast Steel Body, Special Ball Valve, Reduced Bore

Dimensions 150LB NPS 2˝x11/2˝ 3˝x2˝ 4˝x3˝ 6˝x4˝ 8˝x6˝ 10˝x8˝ 12˝x10˝ 14˝x12˝ 16˝x12˝ 18˝x16˝ 20˝x16˝

Bore in 1.5˝ 2˝ 3˝ 4˝ 6˝ 8˝ 10˝ 12˝ 12˝ 15.25˝ 15.25˝Size mm 38 51 76 102 152 203 254 305 305 387 387

Lin 7.0 8.0 9.0 15.5 18.0 21.0 30.0 32.5 35.5 36.0 39.0

mm 178 203 229 394 457 533 762 826 902 914 991

H1in 13.8 15.0 17.7 19.7 23.6 25.6 - - - - -

mm 350 380 450 500 600 650 - - - - -

H2in - - - - - - 27.6 33.5 33.5 51.2 51.2

mm - - - - - - 700 850 850 1300 1300

Dimensions 300LB NPS 2˝x11/2˝ 3˝x2˝ 4˝x3˝ 6˝x4˝ 8˝x6˝ 10˝x8˝ 12˝x10˝ 14˝x12˝ 16˝x12˝ 18˝x16˝ 20˝x16˝ 24˝x20˝

Bore in 1.5˝ 2˝ 3˝ 4˝ 6˝ 8˝ 10˝ 12˝ 12˝ 15.25˝ 15.25˝ 19˝Size mm 38 51 76 102 152 203 254 305 305 387 387 483

Lin 8.5 11.1 12.0 15.9 19.8 22.4 30.0 32.5 35.5 36.0 39.0 55.0

mm 216 282 305 403 502 568 762 826 902 914 991 1397

H1in 15.7 17.7 21.7 23.6 27.6 29.5 - - - - - -

mm 400 450 550 600 700 750 - - - - - -

H2in - - - - - - 31.5 39.4 39.4 55.1 55.1 66.9

mm - - - - - - 800 1000 1000 1400 1400 1700


Bore in 1.5˝ 2˝ 3˝ 4˝ 6˝ 7.87˝ 9.75˝ 11.75˝ 11.75˝ 14.75˝ 14.75˝ 18.25˝Size mm 38 51 76 102 152 200 248 298 298 381 381 479

Lin 11.5 14.0 17.0 22.0 26.0 31.0 33.0 35.0 39.0 43.0 47.0 55.0

mm 292 356 432 559 660 787 838 889 991 1092 1194 1397

H1in 15.0 15.7 19.7 21.7 25.6 27.6 - - - - - -

mm 380 400 500 550 650 700 - - - - - -

H2in - - - - - 27.6 33.5 39.4 39.4 59.1 59.1 70.9

mm - - - - - 700 850 1000 1000 1500 1500 1800

Dimensions 900LB NPS 3˝x2˝ 4˝x3˝ 6˝x4˝ 8˝x6˝ 10˝x8˝ 12˝x10˝ 14˝x12˝ 16˝x12˝ 18˝x16˝ 20˝x16˝ 24˝x20˝

Bore in 1.87˝ 2.87˝ 3.87˝ 5.75˝ 7.5˝ 9.37˝ 11.12˝ 11.12˝ 14˝ 14˝ 17.5˝Size mm 47 73 98 146 191 234 282 282 356 356 445

Lin 15.1 18.1 24.1 29.1 33.1 38.1 40.9 44.9 48.5 52.5 61.0

mm 384 460 613 740 841 968 1038 1140 1232 1334 1549

H1in 15.7 19.7 21.7 25.6 - - - - - - -

mm 400 500 550 650 - - - - - - -

H2in - - - - 27.5 33.4 39.3 47.2 59.0 59.0 59.0

mm - - - - 700 850 1000 1200 1500 1500 1500

41

H

L

H2

L

DHV Industries, Inc.DHV Industries, Inc.3

Floating Ball Valves

Material SpecificationNo. Part Name Carbon Steel Stainless Steel No. Part Name Material

1 Body ASTM A216 WCB ASTM A351 CF8M 11 Body Gasket Virgin PTFE / Graphite

2 Insert ASTM A216 WCB ASTM A351 CF8M 12 Lock Plate AISI 304

3 Ball ASTM A351 CF8M 13 Snap Ring Stainless Steel

4 Stem Subassembly ASTM A276-316 14 Gland Bolt ASTM A193 B7M

5 Gland ASTM A351 CF8 17 Handle Ductile Iron

6 Seat Glass Filled PTFE 18 Name Plate Stainless Steel

7 Stem Bearing Metal Backed PTFE 19 Drive Screw Stainless Steel

8 Thrust Washer Metal Backed PTFE • 20 Handle Adapter Ductile Iron

9 Gland Bushing PTFE • 21 Handle Pipe Carbon Steel

10 Stem Packing PTFE / Graphite • 22 Hex Bolt Carbon Steel

One-Piece Body Class 150 / 300

• No. 20 21 22 are used on 6˝ and larger valves.

40

Rising Stem Ball ValvesOne-Piece, Cast Steel Body, Special Ball Valve, Full Bore

Dimensions 150LB NPS 3/4˝ 1˝ 11/2˝ 2˝ 3˝ 4˝ 6˝ 8˝ 10˝ 12˝ 16˝ 18˝ 20˝ 24˝ 28˝

Bore in 0.75˝ 1˝ 1.5˝ 2˝ 3˝ 4˝ 6˝ 8˝ 10˝ 12˝ 15.25˝ 17.25˝ 19.25˝ 23.25˝ 27.25˝Size mm 19 25 38 51 76 102 152 203 254 305 387 438 489 591 692

Lin 4.6 8.5 9.5 7.0 8.0 12.0 15.9 18.0 26.5 30.0 35.5 43.0 49.2 57.1 66.9

mm 117 216 241 178 203 305 403 457 673 762 902 1092 1250 1450 1700

H1in 9.8 11.8 13.8 15.0 17.7 19.7 23.6 25.6 - - - - - - -

mm 250 300 350 380 450 500 600 650 - - - - - - -

H2in - - - - - - - - 27.6 33.5 51.2 57.1 63.0 74.8 82.7

mm - - - - - - - - 700 850 1300 1450 1600 1900 2100


Bore in 0.75˝ 1˝ 11/2˝ 2˝ 3˝ 4˝ 6˝ 8˝ 10˝ 12˝ 13.23˝ 15.25˝ 19˝ 23˝ 27˝Size mm 19 25 38 51 76 102 152 203 254 305 337 387 483 584 686

Lin 6.0 8.5 9.5 8.5 11 12.0 15.9 19.8 26.5 30.0 32.5 35.5 47.0 57.1 66.9

mm 152 216 241 216 282 305 403 502 673 762 826.0 902 1194 1450 1700

H1in 12.6 13.8 15.7 17.7 21.7 23.6 27.6 29.5 - - - - - - -

mm 320 350 400 450 550 600 700 750 - - - - - - -

H2in - - - - - - - - 31.5 39.4 47.2 55.1 66.9 78.7 86.6

mm - - - - - - - - 800 1000 1200.0 1400 1700 2000 2200

Dimensions 600LB NPS 3/4˝ 1˝ 11/2˝ 2˝ 3˝ 4˝ 6˝ 8˝ 10˝ 12˝ 16˝ 20˝ 24˝ 28˝

Bore in 0.75˝ 1˝ 11/2˝ 2˝ 3˝ 4˝ 6˝ 7.87˝ 9.75˝ 11.75˝ 14.75˝ 18.25˝ 22˝ 25.5˝Size mm 19 25 38 51 76 102 152 200 248 298 381 479 575 648

Lin 7.5 8.5 9.5 11.5 14.0 17.0 22.0 26.0 31.0 33.0 39.0 47.0 55.0 61.0

mm 190 216 241 292 356 432 559 660 787 838 991 1194 1397 1549

H1in 11.8 12.6 15.0 15.7 19.7 21.7 25.6 27.6 - - - - - -

mm 300 320 380 400 500 550 650 700 - - - - - -

H2in - - - - - - - 27.6 33.5 39.4 59.1 70.9 82.7 90.6

mm - - - - - - - 700 850 1000 1500 1800 2100 2300

Dimensions 900LB NPS 3/4˝ 1˝ 11/2˝ 2˝ 3˝ 4˝ 6˝ 8˝ 10˝ 12˝ 16˝ 20˝

Bore in 0.69˝ 0.87" 1.37˝ 1.87˝ 2.87˝ 3.87˝ 5.75˝ 7.5˝ 9.37˝ 11.12˝ 14˝ 17.5˝Size mm 18 22 35 47 73 98 146 191 234 282 356 445

Lin 9.0 10.0 12.0 14.6 15.1 18.1 24.1 29.1 33.1 38.1 44.9 52.0

mm 229 254 305 371 384 460 613 740 841 968 1140 1321

H1in 11.8 12.6 15.0 15.7 19.7 21.7 25.6 - - - - -

mm 300 320 380 400 500 550 650 - - - - -

H2in - - - - - - - 27.6 33.5 39.4 59.1 59.1

mm - - - - - - - 700 850 1000 1500 1500

H

L

H2

L

DHV Industries, Inc.DHV Industries, Inc. 4

Design Features • One-piece Body

• With Anti-static Device

• Blow-out proof stem, Low Emission

• 1/2˝-6˝ Lever operation

8˝-10˝ Optional gear operation

• Manufacturing to NACE MR0175 and MR0103 on request

Specifications

• Basic Design: ANSI B16.34 BS 5351

• Face to Face: ANSI B16.10 SHORT PATTERN

• End Flanged: ANSI B16.5

• Test and Inspection: API-598, API 608

• Fire-safe Design/Test: API 607

Floating Ball ValvesOne-Piece Body Class 150 / 300

Dimensions Class 150 Size 1/2˝ 3/4˝ 1˝ 11/2˝ 2˝ 3˝ 4˝ 6˝ 8˝ 10˝

Ainch 0.39 0.49 0.67 1.18 1.5 2.28 3.0 4.49 6.0 7.36

mm 9.91 12.4 17 30 38.1 57.9 76.2 114 152 186.9

Binch 0.59 0.79 0.98 1.57 2.0 3.0 4.0 6.0 8.0 10

mm 15 20.1 24.9 39.9 50.8 76.2 102 152 203 254

Linch 4.25 4.62 5 6.5 7 8 9.0 10.5 11.5 13

mm 108 117 127 165 178 203 229 267 292 330.2

Hinch 2.08 2.08 2.65 3.32 4.11 5.72 6.29 8.13 9.98 11.46

mm 52.8 52.8 67.3 84.3 104 145 160 207 253 291.1

Cinch 4.5 5.2 5.2 6.4 9.00 15.9 15.9 17.5 43.0 59

mm 114 132 132 163 229 404 404 445 1092 1499

weight (lb) 4 6 7 13 20 35 61 110 183 353

Dimensions Class 300 Size 1/2˝ 3/4˝ 1˝ 11/2˝ 2˝ 3˝ 4˝ 6˝ 8˝

Ainch 0.39 0.49 0.67 1.18 1.5 2.3 3.0 4.49 6.0

mm 9.91 12.4 17 30 38.1 57.9 76.2 114 152

Binch 0.59 0.79 0.98 1.57 2.0 3.0 4.0 6.0 8.0

mm 15 20.1 24.9 39.9 50.8 76.2 102 152 203

Linch 5.5 6 6.5 7.5 8.5 11.1 12.0 15.9 16.5

mm 140 152 165 191 216 282 305 403 419

Hinch 3.58 3.66 4.09 3.82 4.09 5.71 6.29 10 11.4

mm 90.9 93 104 97 104 145 160 254 289

Cinch 4.5 5.2 5.2 6.4 9.00 15.9 15.9 29 43.0

mm 114 132 132 163 229 404 404 737 1092

weight (lb) 6 10 11 19 26 52 86 143 309

39

Material Specification

Rising Stem Ball ValvesOne-Piece, Cast Steel Body, Special Ball Valve

Design Features • One-Piece Body • Top Entry • Rising Stem Type • Downstream Seal • Low Torque, low Emission • Long Service Life

Specifications • Basic Design: ANSI B16.34 • Face to Face: DHV Standard

ANSI B16.10 • End Flanged: ANSI B16.5 • BW End: ANSI B16.25 • Test and Inspection: API 598, API 6D

Note: Other Material Standard can be Supplied Upon Request

Core rotated to 90° withouttouching the seat Full Close Position

Full Open PositionCore rotated against

guide pins

Carbon St. Body Stainless St. Body

No. Parts Name CS NACE TRIM S.S. TRIMDuplex S.S. / SUPER S.S. TRIM

Duplex S.S. TRIMSOUR SERVICE SOUR SERVICESOUR SERVICE SOUR SERVICE

1 BodyA216 WCB / WCC / WC6/ WC9 + ENP A351 CF8 / CF8M2 Bonnet

3 Seat A105+STL 13Cr / 304SS / 316SS+STL A182 F51 / F53+STL A182 F304 / F316+STL4 Core WCB+STL CA15 / CF8 / CF8M+STL A890 4A / 5A+STL CF8 / CF8M+STL5 Stem 17-4PH A182 F51 / F53 17-4PH6 Support Pin CARBON STEEL STAINLESS STEEL7 Core Pin 304SS / 316SS / 17-4PH8 Bonnet Bushing 13Cr / 17-4PH A182 F51 / F53 17-4PH9 O-Ring VITON-B10 Gasket Sprial Woud 316SS Graphite11 Trunnion Bush 17-4PH A182 F51 / F53 304SS / 316SS/ 17-4PH12 Bolts A193 B7M A193 B8 / B8M13 Nuts A194 2HM A194 8 / 8M14 Packing Graphite15 Gland A216 WCB / WCC / WC6/ WC9 A351 CF8 / CF8M16 Gland Eyebolt A193 B7M A193 B8 / B8M17 Nuts A194 2HM A194 8 / 8M18 Stem Guide 17-4PH A182 F51 / F53 17-4PH19 Bearing Cover CARBON STEEL STAINLESS STEEL20 Stem Nut A439 D221 Bearing STEEL+PTFE22 Handwheel Cast Iron23 Indicator STAINLESS STEEL

Upstream Downstream


Design Features

• Two-piece Body




8˝-12˝ Gear operation


Specifications


• Face to Face: ANSI B16.10 LONG PATTERN




Floating Ball ValvesTwo-Piece Body Class 150 - 1500

Material Specification Material Standard Material Standard

No. Standard

Carbon Steel Stainless Steel No. Standard

Carbon Steel Stainless Steel

Parts to ASTM to ASTM Parts to ASTM to ASTM

1 Body A216-WCB A351-CF8 / CF8M 9 Stem Bearing Metal Backed PTFE / Graphite

2 Body Cap A216-WCB A351-CF8 / CF8M 10 Gland Bolt A105, 1035

3 Stem A276-316 / 304 / 410 A276 - 304 / 316 11 Stud A193-B7 A193-B8

4 Gland A276-410 / 304 / 316 / A105+ENP A276 - 304 / 316 12 Nut A194-2H A194-8

5 Ball A216-WCB+ENP / A351-CF8M / CF8 A276-304 / 316 / A351-CF8M / CF8 13 Thrust Washer Metal Backed PTFE / Graphite

6 Flange A216 - WCB A351-CF8 / CF8M 14 Spring A276-302 A276-302 / 316

7 Stem Packing PTFE / Graphite PTFE / Graphite15 Seat

PTFE / Graphite / Metal Backed STL /

8 Gasket PTFE / Graphite PTFE / Graphite Metal Backed Rubber

38

Fully Welded Ball Valves

Dimensions and weightsClass Size D L H 1 H L1 WG.

in mm in mm in mm in mm in mm lb kg2˝ 2 51 11.5 292 3.35 85 4.17 106 24 610 51 233˝ 3 76 14 356 4.72 120 6.1 155 35.4 900 108 494˝ 4 102 17 432 5.71 145 7.48 190 47.2 1200 211 966˝ 6 152 22 559 12.2 310 8.46 215 - - 530 2418˝ 8 203 26 660 13.78 350 9.92 252 - - 550 250

10˝ 10 254 31 787 15.35 390 11.6 295 - - 759 34512˝ 12 305 33 838 16.93 430 13.5 342 - - 1166 53014˝ 13.3 337 35 889 18.9 480 14.7 373 - - 1716 780

600 16˝ 15.2 387 39 991 20.55 522 16.3 414 - - 2640 1200LB 18˝ 17.2 438 43 1092 22.13 562 18 458 - - 3520 1600

20˝ 19.3 489 47 1194 23.78 604 19.4 492 - - 4477 203522˝ 21.3 540 51 1295 25.59 650 21.1 537 - - 5940 270024˝ 23.3 591 55 1397 27.17 690 22.6 573 - - 7464 339226˝ 25 635 57 1448 29.13 740 24.5 622 - - 9130 415028˝ 27 686 61 1549 30.51 775 25.9 658 - - 11220 510030˝ 29 737 65 1651 32.68 830 27.4 697 - - 12720 578232˝ 30.7 781 70 1778 34.25 870 29 736 - - 15180 690034˝ 32.8 832 76 1930 35.43 900 30.9 784 - - 18117 8235

2˝ 2.0 51 14.5 368 3.46 88 4.69 119 24 610 88 403˝ 3.0 76 15 381 4.92 125 6.1 155 35.4 900 136 624˝ 4.0 102 18 457 5.94 151 7.48 190 47.2 1200 231 1056˝ 6.0 152 24 610 9.84 250 9.49 241 - - 656 2988˝ 8.0 203 29 737 11.42 290 10.83 275 - - 726 330

10˝ 10 254 33 838 13.58 345 12.48 317 - - 924 42012˝ 12 305 38 965 15.35 390 14.37 365 - - 1386 63014˝ 12.75 324 40.5 1029 17.72 450 15.31 389 - - 2068 94016˝ 14.75 375 44.5 1130 19.69 500 16.89 429 - - 3190 1450

900 18˝ 16.75 425 48 1219 21.65 550 19.13 486 - - 4246 1930LB 20˝ 18.75 476 52 1321 23.31 592 20.87 530 - - 5500 2500

22˝ 20.63 524 - - 25.79 655 21.93 557 - - 7150 325024˝ 22.5 572 61 1549 27.48 698 24.33 618 - - 8976 408026˝ 24.38 619 - - 29.92 760 26.26 667 - - 11022 501028˝ 26.25 667 - - 31.89 810 27.91 709 - - 13332 606030˝ 28.13 715 - - 32.8 833 29.65 753 - - 14740 670032˝ 30.00 762 - - 35.83 910 31.93 811 - - 18370 835034˝ 31.88 810 - - 37.8 960 33.35 847 - - 21626 9830

2˝ 2.0 51 14.5 368 4.29 109 4.69 119 23.6 600 97 443˝ 3.0 76 18.5 470 6.06 154 6.1 155 35.4 900 196 894˝ 4.0 102 21.5 546 7.32 186 7.48 190 47.2 1200 330 1506˝ 5.75 146 27.8 705 12.6 320 11.02 280 - - 746 3398˝ 7.63 194 32.8 832 14.61 371 12.87 327 - - 836 380

10˝ 9.50 241 39 991 17.4 442 15.43 392 - - 1098 49912˝ 11.38 289 44.5 1130 19.65 499 16.65 423 - - 1672 76014˝ 12.50 318 49.5 1257 22.68 576 19.65 499 - - 2442 111016˝ 14.25 362 54.5 1384 25.2 640 21.97 558 - - 3718 1690

1500 18˝ 16.26 413 - - 27.72 704 23.19 589 - - 5104 2320LB 20˝ 17.99 457 - - 29.84 758 28.5 724 - - 6468 2940

22˝ 19.76 502 - - 32.99 838 30.2 767 - - 8554 388824˝ 21.61 549 - - 35.16 893 32.01 813 - - 10780 490026˝ 23.5 597 - - 38.31 973 35.47 901 - - 13200 600028˝ 25.24 641 - - 40.83 1037 37.05 941 - - 16060 730030˝ 27.01 686 - - 41.97 1066 40.75 1035 - - 18458 839032˝ 28.74 730 - - 45.87 1165 41.73 1060 - - 21956 998034˝ 30.51 775 - - 48.39 1229 44.88 1140 - - 26180 11900

* Class 150LB & 300LB Reduced Bore are Short Pattern.



NPS 1/2˝-3˝ NPS 4˝-6˝ NPS 8˝-12˝

Dimensions and weights

* Gear operator is optional for these sizes.

Class 150 NPS 1/2˝ 3/4˝ 1˝ 11/2˝ 2˝X11/2˝ 2˝ 21/2˝X2˝ 21/2˝ 3˝X21/2˝ 3˝ 4˝X3˝ 4˝ 5˝ 6˝X4˝ 6˝ 8˝X6˝ 8˝ 10˝X8˝* 10˝* 12˝X10˝* 12˝ *

Bore in 1/2 3/4 1 11/2 11/2 2 2 2 1/2 2 1/2 3 3 4 5 4 6 6 8 8 10 10 12

Size mm 13 19 25 38 38 51 51 64 64 76 76 102 127 102 152 152 203 203 254 254 305

Lin 4.25 4.62 5.00 6.50 7.00 7.00 7.50 7.50 8.00 8.00 9.00 9.00 14.00 10.50 15.50 11.50 18.00 13.00 21.00 14.00 24.00

mm 108 117 127 165 178 178 190 190 203 203 229 229 356 267 394 292 457 330 533 356 610

Hin 2.30 2.50 3.00 3.80 4.50 5.0 5.0 6.0 6.00 6.00 6.40 7.00 10.00 7.50 10.70 11.40 13.50 13.40 13.60 15.40 15.70

mm 59 63 75 97 115 127 127 152 152 152 162 178 252 191 272 290 342 340 345 390 400

Cin 5.10 5.10 6.30 9.10 9.10 9.10 9.10 15.70 15.70 15.70 15.70 25.60 41.34 18.10 41.34 43.30 55.5 - - - -

mm 130 130 160 230 230 230 230 400 400 400 400 650 1050 460 1050 1100 1410 - - - -

Din - - - - - - - - - - - - - - - - 15.75 15.75 24.75 24.75 31.50

mm - - - - - - - - - - - - - - - - 400 400 629 629 800

WG.

lb 5 7 10 15 21 21 33 33 42 42 73 73 126 128 165 205 253 352 506 550 616

kg 2.2 2.7 4.5 7.0 9.5 9.5 15 15 19 19 23 30 58 55 75 83 115 128 230 310 370

Class 300 NPS 1/2˝ 3/4˝ 1˝ 11/2˝ 2˝X11/2˝ 2˝ 21/2˝X2˝ 21/2˝ 3˝X21/2˝ 3˝ 4˝X3˝ 4˝ 5˝ 6˝X4˝ 6˝ 8˝X6˝ 8˝* 10˝X8˝* 10˝* 12˝X10˝* 12˝*

Bore in 1/2 3/4 1 11/2 11/2 2 2 2 1/2 2 1/2 3 3 4 5 4 6 6 8 8 10 10 12

Size mm 13 19 25 38 38 51 51 64 64 76 76 102 127 102 152 152 203 203 254 254 305

Lin 5.50 6.00 6.50 7.50 8.50 8.50 9.50 9.50 11.12 11.12 12.00 12.00 15.00 15.88 15.88 16.50 19.75 18.00 22.38 19.75 25.50

mm 140 152 165 190 216 216 241 241 283 283 305 305 381 403 403 419 502 457 568 502 648

Hin 2.3 2.5 3.0 3.8 4.50 5.0 5.0 6.0 6.0 6.0 6.40 7.0 10.0 7.50 10.7 11.40 13.5 13.40 13.6 15.40 15.7

mm 59 63 75 97 115 127 127 152 152 152 162 178 252 191 272 290 342 340 345 390 400

Cin 5.1 5.1 6.3 9.10 9.10 9.10 9.10 15.70 15.70 15.70 15.70 27.60 43.30 18.10 43.30 43.30 - - - - -

mm 130 130 160 230 230 230 230 400 400 400 400 700 1100 460 1100 1100 - - - - -

Din - - - - - - - - - - - - - - - - 24.78 21.88 31.50 31.50 31.50

mm - - - - - - - - - - - - - - - - 629 556 800 800 800

WG.

lb 5.5 7.7 12.1 23.1 32 32 52 52 66 66.0 88 143 178.2 178 209 260 330 440 550 691 836

kg 2.5 3.5 5.5 9 13 13 21 21 24 27 38 40 65 72.5 95.0 118.0 150.0 224 257.5 380 420

Class 600 NPS 1/2˝ 3/4˝ 1˝ 11/2˝ 2˝x11/2˝ 2˝ 3˝x2˝ 3˝ 4˝x3˝ 4˝

Bore in 1/2˝ 3/4˝ 1˝ 11/2˝ 11/2˝ 2˝ 2˝ 3˝ 3˝ 4

Size mm 13 19 25 38 38 51 51 76 76 102

Lin 6.5 7.5 8.5 9.5 11.5 11.5 14 14 17 17

mm 165 190 216 241 292 292 356 356 432 432

Hin 2.9 3.1 4.0 4.4 4.4 5.5 5.5 12.2 12.2 13.8

mm 74.5 79.5 101 111 111 140 140 310 310 350

Cin 6.3 6.3 9.1 9.1 9.1 15.7 15.7 31.5 31.5 41.3

mm 160 160 230 230 230 400 400 800 800 1050

WG.

lb 7.7 13.2 17.6 28.6 50.7 55.1 88.1 99.1 143.2 154.2

kg 3.5 6 8 13 23 25 40 45 65 70

Class 900 NPS 1/2˝ 3/4˝ 1˝ Bore in 1/2 3/4 1

Size mm 13 19 25

Lin 8.5 9.0 10.0

mm 216 229 254

Hin 5.4 5.6 5.6

mm 138 141 143

Cin 6.3 9.1 9.1

mm 160 230 230

WG.

lb 22.0 24.2 30.8

kg 10 11 14

Class 1500 NPS 1/2˝ 3/4˝ 1˝ Bore in 1/2 3/4 1

Size mm 13 19 25

Lin 8.5 9.0 10.0

mm 216 229 254

Hin 5.4 5.6 5.6

mm 138 141 143

Cin 6.3 9.1 9.1

mm 160 230 230

WG.

lb 22.0 24.2 30.8

kg 10 11 14

37



Class Size D L H 1 H L1 WG.

in mm in mm in mm in mm in mm lb kg2˝ 2.00 51 8.5 216 3.23 82 4.17 106 12 305 41 193˝ 3.00 76 11.1 283 4.57 116 5.24 133 17.7 450 73 334˝ 4.00 102 12 305 5.55 141 6.26 159 36 915 114 52

6˝ 6.00 152 18 457 11.9 301 8.46 215 - - 385 175

8˝ 8.00 203 20.5 521 13.4 340 9.92 252 - - 444 202

10˝ 10 254 22 559 14.9 378 11.6 295 - - 572 260

12˝ 12 305 25 635 16.4 417 13.5 342 - - 902 410

14˝ 13.3 337 30 762 18.3 466 14.7 373 - - 1302 592

150 16˝ 15.2 387 33 838 19.9 506 16.3 414 - - 1969 895

LB 18˝ 17.2 438 36 914 21.5 545 18 458 - - 2638 1199

20˝ 19.3 489 39 991 23.1 586 19.4 492 - - 3408 1549

22˝ 21.3 540 43 1092 24.8 631 21.1 537 - - 4510 2050

24˝ 23.3 591 45 1143 26.3 669 22.6 573 - - 5698 2590

26˝ 25 635 49 1245 28.3 718 24.5 622 - - 7016 3189

28˝ 27 686 53 1346 29.6 752 25.9 658 - - 8479 3854

30˝ 29 737 55 1397 31.7 805 27.4 697 - - 9680 4400

32˝ 30.7 781 60 1524 33.2 844 29 736 - - 11636 5289

34˝ 32.8 832 64 1626 34.4 873 30.9 784 - - 13640 6200

2˝ 2.00 51 8.5 216 3.23 82 4.17 106 17.7 405 46 213˝ 3.00 76 11.1 283 4.57 116 5.24 133 36 915 77 354˝ 4.00 102 12 305 5.55 141 6.26 159 36 915 150 68

6˝ 6.00 152 15.9 403 11.9 301 8.46 215 - - 422 192

8˝ 8.00 203 20.5 521 13.4 340 9.92 252 - - 464 211

10˝ 10 254 22 559 14.9 378 11.6 295 - - 638 290

12˝ 12 305 25 635 16.4 417 13.5 342 - - 856 389

14˝ 13.3 337 30 762 18.3 466 14.7 373 - - 1342 610

300 16˝ 15.2 387 33 838 19.9 506 16.3 414 - - 1980 900

LB 18˝ 17.2 438 36 914 21.5 545 18 458 - - 2849 1295

20˝ 19.3 489 39 991 23.1 586 19.4 492 - - 3606 1639

22˝ 21.3 540 43 1092 24.8 631 21.1 537 - - 4796 2180

24˝ 23.3 591 45 1143 26.3 669 22.6 573 - - 6028 2740

26˝ 25 635 49 1245 28.3 718 24.5 622 - - 7480 3400

28˝ 27 686 53 1346 29.6 752 25.9 658 - - 8943 4065

30˝ 29 737 55 1397 31.7 805 27.4 697 - - 10340 4700

32˝ 30.7 781 60 1524 33.2 844 29 736 - - 12100 5500

34˝ 32.8 832 64 1626 34.4 873 30.9 784 - - 14740 6700


Small Size Ball Valves

Design Features • One-piece Body, Reduced Bore, Floating Ball

• Blow-out Proof Stem, Low Emission

• NPT Threaded Ends

• Locking Device, on request

• NACE MR0175

Material SpecificationNo. Parts Carbon Steel Stainless Steel

11 Body AISI 1045 316SS

10 Inscrewed Part AISI 1045 316SS

9 Ball 316SS

8 Stem Nut 304SS

7 Stem 316SS

6 Seat 15% R-PTFE

5 Stem Packing Teflon

4 Packing Ring 304SS

3 Thrust Washer Teflon

2 Handle 304SS

1 Plastic Cover Plastic


Size 1/4˝ 3/8˝ 1/2˝ 3/4˝ 1˝ 11/4˝ 11/2˝ 2˝

D in 0.20 0.28 0.35 0.49 0.63 0.79 0.96 1.26mm 5 7 9 12.5 16 20 24.5 32

L in 1.57 1.77 2.28 2.36 2.83 3.15 3.35 4.02mm 40 45 58 60 72 80 85 102

H in 1.30 1.42 1.65 1.77 2.05 2.24 2.36 2.60mm 33 36 42 45 52 57 60 66

C in 2.64 2.64 3.54 3.54 4.41 4.41 5.20 5.20mm 67 67 90 90 112 112 132 132

Weights lb 0.15 0.24 0.37 0.55 0.88 1.47 1.80 2.86kg 0.07 0.11 0.17 0.25 0.4 0.67 0.82 1.30

Specifications

• End to End: DHV Standard

• Thread End: ANSI B2.1 NPT

2000 WOG

36


Specifications

• Basic Design: ANSI B16.34 , API-6D

• End to End: ANSI B16.10 , API-6D

• Butt Weld End: ANSI B16.25

NO. DESCRIPTION

1 BODY

2 BALL

3 STEM

4 INNER SEAT RING

5 OUTER SEAT RING

6 SEAT O-RING

7 O-RING

8 BODY O-RING

9 GRAPHITE PACKING

10 STEM O-RING

11 GLAND O-RING

12 TRUNNION O-RING

13 END PIECE

14 SEAT COIL SPRING

15 TRUNNION

16 WRENCH BOLT

17 SEAT KEY

18 U-CUP RING

19 DRAIN FITTING

20 GREASE FITTING W / CHECK VALVE

21 RELIEF VALVE

22 GLAND FLANGE

23 WASHER

24 GLAND BUSHING

25 GLAND

26 GREASE FITTING(SEALANT INJECTOR)

27 STEM KEY

28 DOWEL PIN

29 DRY BEARING

30 THRUST WASHER

31 BEARING RETAINER


1/13Body CS ASTM A216-WCB, A106 Gr. B, A105, A352-LCB

End Piece SS ASTM A351-CF8 CF8M, A182-F304 F316

2 BallCS A105, A216-WCB, A352-LCB+ENP

SS ASTM A351-CF8 / CF8M, AISI 304 / 316, A217-CA15

3 StemCS A105 + ENP, AISI 4140+ENP

SS, AISI 304 / 316

Metal Seat With Insert Ring

4 Seats CS A36 / A216+Nickel Coating

SS ASTM A351-CF8,CF8M / AISI 304, 316

5-12 Seals Graphite, PTFE, FPM etc.,

14 Spring Inconel X-750

15 Trunnion AISI 304 316 or Equivalent

16 Stud / Nuts A193-B7 A194-2H, A193-B7M A194-2HM, A320-L7M A194-7M

16

22

9

24

25

11

27

1

13

14

718

174

6

5

23

10

26

3

28

84

2

2930

3119

12

15

20

21

Note:all materials may be adjustable at User's request.


Design Features

• Two-piece Body, Reduced & Full Bore,

Floating Ball.


• Locking Device, on request.

• NACE MR0175

Dimensions and weightsSize DN 1/4˝ 3/8˝ 1/2˝ 3/4˝ 1˝ 11/4˝ 11/2˝ 2˝ 21/2˝ 3˝

D in 0.46 0.5 0.59 0.79 0.98 1.26 1.54 2 2.56 3.15mm 11.6 12.7 15 20 25 32 39 50.8 65 80

L in 2.42 2.42 2.49 3.02 3.58 3.94 4.65 5.41 6.54 7.6mm 61.5 61.5 63.3 76.7 91 100 118 137.5 166 193

H in 1.89 1.89 1.93 2.17 2.72 3.03 3.31 3.66 5.43 6.10mm 48 48 49 55 69 77 84 93 138 155

C in 4.72 4.72 4.72 5.12 6.10 6.10 7.28 7.28 9.84 11.02mm 120 120 120 130 155 155 185 185 250 280

Weightslb 0.66 0.66 0.66 1.28 2.29 3.39 4.97 8.36 15 25.48kg 0.3 0.3 0.3 0.58 1.04 1.54 2.26 3.8 6.8 11.58

Specifications



• Socket Weld End: ANSI B16.11

Material SpecificationNo. Description Carbon Steel Stainless Steel

1 Body A216 WCB A351 CF8 A351 CF8M

2 Body Cap A216 WCB A351 CF8 A351 CF8M

3 Ball A276-304 A276-304 A276-316

4 Seat PTFE reinforced

5 Stem A276-304 A276-316

6 Body Seal PTFE

7 Thrust Washer PTFE

8 Packing PTFE

9 Gland Nut A276-304 A276-304

10/11 Nut & Washer Carbon Steel+Nickel Plated A276-304

12 Handle Carbon Steel+Nickel Plated A276-304


14 Locking Device Carbon Steel+Nickel Plated A276-304

Small Size Ball Valves1000 / 2000 WOG

35

Class 1500 NPS 11/2˝FP 2˝RP 2˝FP 3˝RP 3˝FP 4˝RP 4˝FP 6˝RP 6˝FP 8˝RP 8˝FP 10˝RP 10˝FP 12˝RP 12˝FP

Bore inch) 1.5 1.5 2.0 2.0 3.0 3.0 4.0 4.0 5.75 5.75 7.625 7.625 9.5 9.5 11.375

Size mm 38 38 51 51 76 76 102 102 146 146 194 194 241 241 289

inch 12.0 14.5 14.5 18.5 18.5 21.5 21.5 27.8 27.8 32.8 32.8 39.0 39.0 44.5 44.5L

mm 305 368 368 470 470 546 546 705 705 832 832 991 991 1130 1130

inch 3.7 3.7 4.5 4.5 5.3 5.3 6.5 6.5 8.0 8.0 11.6 11.6 14.0 14.0 15.9H1

mm 95 95 114 114 135 135 166 166 202 202 295 295 355 355 404

inch 6.4 6.4 7.9 7.9 9.2 9.2 11.3 11.3 13.7 13.7 18.7 18.7 21.3 21.3 23.1H2

mm 162 162 200 200 233 233 286 286 347 347 474 474 542 542 586

inch 17.7 17.7 23.6 23.6 39.4 39.4 - - - - - - - - -C

mm 450 450 600 600 1000 1000 - - - - - - - - -

inch - - - - - - 27.6 27.6 27.6 27.6 27.6 27.6 27.6 27.6 27.6D

mm - - - - - - 700 700 700 700 700 700 700 700 700

Weight kg 32 40 56 78 96 140 180 220 318 377 495 606 777 811 1324

Trunnion Mounted Ball ValvesOne-Piece, Cast Steel Body, Class 1500 Top Entry

Note: more sizes available upon request.

Class 1500 NPS 14˝FP 14˝RP 16˝FP 16˝RP 18˝FP 18˝RP 20˝FP 20˝RP 24˝FP

Bore inch) 11.375 12.5 12.5 14.25 14.25 16.0 16.0 18.0 21.0

Size mm 289 318 318 362 362 407 407 457 534

inch 49.5 49.5 54.5 54.5 60.5 60.5 65.5 65.5 80.4L

mm 1257 1257 1384 1384 1537 1537 1664 1664 2043

inch 15.9 18.4 18.4 19.5 19.5 20.5 20.5 25.2 25.2H1

mm 404 467 467 495 495 520 520 639 640

inch 23.1 22.6 22.6 24.4 24.4 29.1 29.1 31.3 38.5H2

mm 586 575 575 620 620 740 740 795 979

inch - - - - - - - - -C

mm - - - - - - - - -

inch 27.6 27.6 27.6 27.6 27.6 55.1 55.1 55.1 55.1D

mm 700 700 700 700 700 1400 1400 1400 1400

Weight kg 2780 2700 3240 3980 4653 5325 6063 6800 11900


Design Features • Three-piece Body, Full Bore, Floating Ball. • Blow-out Proof Stem, Low Emission • Locking Device, on request. • NACE MR0175

Small Size Ball Valves1000 / 2000 / 3000 WOG

Specifications • End to End: DHV Standard • Thread End: ANSI B2.1 NPT • Socket Weld End: ANSI B16.11

Dimensions and weightsSize WOG DN 1/4˝ 3/8˝ 1/2˝ 3/4˝ 1˝ 11/4˝ 11/2˝ 2˝ 21/2˝ 3˝ 4˝

1000 / 2000in 0.46 0.5 0.59 0.79 1 1.26 1.5 2 2.56 3.15 3.94

Dmm 11.6 12.7 15 20 25.4 32 38 50.8 65 80 100

3000in - - 0.51 0.75 0.91 1.25 1.38 1.81 - - -

mm - - 13 19 23 32 35 46 - - -

1000 / 2000in 2.56 2.56 2.6 3.27 3.74 4.37 5.12 5.94 7.28 8.35 10.63

Lmm 65 65 66 83 95 111 130 151 185 212 270

3000in - - 3.62 4.37 5 5.24 5.98 6.77 - - -

mm - - 92 111 127 133 152 172 - - -

1000 / 2000in 1.65 1.65 1.93 2.05 2.44 2.6 3.03 3.35 5.47 5.90 6.81

Hmm 42 42 49 52 62 66 77 85 139 150 173

3000in - - 2.95 3.03 3.62 3.82 4.13 4.33 - - -

mm - - 75 77 92 97 105 110 - - -

1000 / 2000in 3.86 3.86 4.53 4.53 5.63 5.63 7.01 7.01 9.84 9.84 9.84

Cmm 98 98 115 115 143 143 178 178 250 250 250

3000in - - 4.84 6.3 6.3 7.68 7.68 9.84 - - -

mm - - 123 160 160 195 195 250 - - -

1000 / 2000lb 0.9 0.88 1.43 1.76 2.64 4.51 6.16 9.57 18.5 31.9 58.3

Weightskg 0.41 0.4 0.65 0.80 1.2 2.05 2.8 4.35 8.4 14.5 26.5

3000lb - - 3.89 5.8 10 16.52 20.02 24.23 - - -kg - - 1.77 2.63 4.54 7.5 9.09 11.00 - - -


No. Part 1000 / 2000 WOG 3000 WOGStainless Steel Carbon Steel Stainless Steel Carbon Steel

1 Body A351 CF8M A216 WCB A182 F316 A1052 Cap A351 CF8M A216 WCB A182 F316 A1053 Ball 316 304 A182 F3164 Seat 15% R-PTFE NYLON5 Stem A276-316 A182 F3166 Thrust Washer 15% R-PTFE 15% R-PTFE7 Stem Packing 15% R-PTFE 15% R-PTFE8 Bolt 304 SS A193 B8 / B8M A193 B7 / B7M9 Hex Nut 304 SS A194 8 / 8M A194 2H / 2HM

10 Bolt Washer Stainless Steel Stainless Steel11 Gland Nut A276-304 A182 F31612 Stem Washer A276-304 Stainless Steel13 Stem Nut A276-304 A194 8 / 8M A194 2H / 2HM14 Handle Stainless Steel Stainless Steel15 Plastic Cover Plastic Plastic16 Lock Device Stainless Steel Stainless Steel

34


Bore inch 1.5 1.5 2.0 2.0 3.0 3.0 4.0 4.0 6.0 6.0 8.0 8.0 10.0 10.0 12.0

Size mm 38 38 51 51 76 76 102 102 152 152 203 203 254 254 305

inch 12.0 14.5 14.5 15.0 15.0 18.0 18.0 24.0 24.0 29.0 29.0 33.0 33.0 38.0 38.0L

mm 305 368 368 381 381 457 457 610 610 737 737 838 838 965 965

inch 3.6 3.6 4.3 4.3 5.2 5.2 6.3 6.3 7.8 7.8 11.1 11.1 13.1 13.1 15.2H1

mm 92 92 110 110 133 133 160 160 197 197 282 282 334 334 387

inch 6.1 6.1 7.7 7.7 8.7 8.7 10.7 10.7 12.8 12.8 17.3 17.3 20.1 20.1 21.7H2

mm 155 155 195 195 220 220 272 272 325 325 440 440 510 510 550

inch 17.7 17.7 23.6 23.6 39.4 39.4 - - - - - - - - -C

mm 450 450 600 600 1000 1000 - - - - - - - - -

inch - - - - - - 19.7 19.7 27.6 27.6 27.6 27.6 27.6 27.6 27.6D

mm - - - - - - 500 500 700 700 700 700 700 700 700

Weight kg 32 40 56 62 78 103 128 168 260 320 452 557 727 778 1105


Bore inch) 12.0 12.75 12.75 14.75 14.75 16.75 16.75 18.625 22.5

Size mm 305 324 324 375 375 425 425 473 572

inch 40.5 40.5 44.5 44.5 48.0 48.0 52.0 52.0 61.0L

mm 1029 1029 1130 1130 1219 1219 1321 1321 1549

inch 15.2 17.3 17.3 18.3 18.3 19.1 19.1 23.6 24.4H1

mm 387 440 440 465 465 485 485 600 620

inch 21.7 21.5 21.5 23.8 23.8 25.6 25.6 30.5 32.9H2

mm 550 545 545 605 605 650 650 775 835

inch - - - - - - - - -C

mm - - - - - - - - -

inch 27.6 27.6 27.6 27.6 27.6 27.6 27.6 55.1 55.1D

mm 700 700 700 700 700 700 700 1400 1400

Weight kg 1855 1800 2160 2650 2925 3550 4100 4530 7450




Class 150 / 300

Design Features DHV Multi Port Three Way Ball Valves are designed for a large

array of services and suitable for either switching or mixing

application. Our design features allow quick and positive shutoff

with just a quarter turn. DHV Three Way Ball Valves provide many

features in standard L-Port or T-Port types. Each type offers many

variable positions and flow patterns to meet your particular service

needs.

Specifications • Basic Design: ANSI B16.34

• Face to Face: DHV Standard

• End Flange: ANSI B16.5

• Test & Inspection: API - 598

Material for main parts1 Body WCB CF8 CF8M

2 Ball WCB / ENP F304 F316

3 Seat PTFE PTFE PTFE

4 Stem 13Cr F304 F316

5 Packing PTFE PTFE PTFE

DimensionsSize d d 1 L2 L1 H W

in mm in mm in mm in mm in mm in mm in mm

1/2˝ 15 1/2˝ 15 1/2˝ 15 5.51 140 2.76 70 2.52 64 5.12 130

3/4˝ 20 3/4˝ 20 3/4˝ 20 6.50 165 3.25 83 3.31 84 6.30 160

1˝ 25 1˝ 25 1˝ 25 6.50 165 3.25 83 3.31 84 6.30 160

11/2˝ 40 11/2˝ 40 11/2˝ 40 9.84 250 4.92 125 5.98 152 19.68 500

2˝ 50 2˝ 50 2˝ 50 10.24 260 5.12 130 6.18 157 19.68 500

21/2˝ 65 21/2˝ 65 21/2˝ 65 12.60 320 6.30 160 7.20 183 31.50 800

3˝ 80 3˝ 80 3˝ 80 12.60 320 6.30 160 7.20 183 31.50 800

4˝ 100 4˝ 100 4˝ 100 14.57 370 7.28 185 7.68 195 31.50 800

5˝ 125 5˝ 125 5˝ 125 20.08 510 10.04 255 13.98 355 33.46 850

6˝ 150 6˝ 150 5˝ 125 20.08 510 10.04 255 13.98 355 33.46 850

8˝ 200 8˝ 200 6˝ 150 22.84 580 11.42 290 16.93 430 59.06 1500

10˝ 254 10˝ 254 8˝ 203 26.38 670 13.19 335 18.70 475 - -

12˝ 300 12˝ 300 10˝ 254 28.35 720 14.17 360 21.65 550 - -

B. T-Type

A. L-Type

Three Way Ball Valves

33



Bore inch 1.5 1.5 2.0 2.0 3.0 3.0 4.0 4.0 6.0 6.0 8.0 8.0 10.0 10.0 12.0

Size mm 38 38 51 51 76 76 102 102 152 152 203 203 254 254 305

inch 9.5 11.5 11.5 14.0 14.0 17.0 17.0 22.0 22.0 26.0 26.0 31.0 31.0 33.0 33.0L

mm 241 292 292 356 356 432 432 559 559 660 660 787 787 838 838

inch 3.5 3.5 4.1 4.1 4.9 4.9 5.9 5.9 7.2 7.2 10.8 10.8 12.5 12.5 14.3H1

mm 90 90 105 105 125 125 151 151 184 184 274 274 318 318 362

inch 4.9 4.9 5.6 5.6 7.7 7.7 8.6 8.6 11.3 11.3 16.0 16.0 17.7 17.7 20.1H2

mm 125 125 142 142 195 195 219 219 286 286 407 407 450 450 510

inch 17.7 17.7 23.6 23.6 39.4 39.4 39.4 39.4 - - - - - - -C

mm 450 450 600 600 1000 1000 1000 1000 - - - - - - -

inch - - - - - - - - 27.6 27.6 27.6 27.6 27.6 27.6 27.6D

mm - - - - - - - - 700 700 700 700 700 700 700

Weight kg 19.5 21 36 46 63 85 109 152 236 301 423 506 694 740 977


Dimension and Weights

Class 600 NPS 14˝FP 14˝RP 16˝FP 16˝RP18˝FP 18˝RP 20˝FP 20˝RP 24˝FP 26˝RP 28˝FP 30˝RP

Bore inch 12 13.25 13.25 15.25 15.25 17.25 17.25 19.25 23.25 25 27 29

Size mm 305 337 337 387 387 438 438 489 591 635 686 737

Linch 35 35 39 39 43 43 47 47 55 57 61 65

mm 889 889 991 991 1092 1092 1194 1194 1397 1448 1549 1651

inch 14.3 16.9 16.9 17.7 17.7 18.6 18.6 22.8 23.6 25.0 27.6 30.5H1

mm 362 428 428 450 450 473 473 580 600 635 700 775

inch 20.1 20.7 20.7 22.4 22.4 24.8 24.8 26.9 31.8 34.6 37.2 39.6H2

mm 510 526 526 568 568 629 629 682 808 880 945 1005

inch - - - - - - - - - - - -C

mm - - - - - - - - - - - -

inch 27.6 27.6 27.6 27.6 27.6 27.6 27.6 27.6 55.1 55.1 55.1 55.1D

mm 700 700 700 700 700 700 700 700 1400 1400 1400 1400

Weight (kg) 1230 1190 1430 1735 1940 2350 2700 3000 4950 5950 7130 8730


Trunnion Mounted Ball Valves

2-PC Side Entry Trunnion Ball Valve 3-PC Side Entry Trunnion Ball Valve 1-PC Top Entry Trunnion Ball Valve

Specifications

• Basic Design: ANSI B16.34, API 6D

• Face to Face: ANSI B16.10, API 6D


• BW End: ANSI B16.25

• Test and Inspection: API 6D

Design Features

• Full & reduced bore, cast or forged steel body.

• Double Block and Bleed.

• Anti-static device, Low Emission

• Fire-safe Design / Tested to API 6FA.

• Operator Refer to MESC 77/ 130 & DHV Standard.

• Manufacturing to NACE MR0175 on request.

Application

DHV Side Entry Trunnion Mounted Ball Valve are designed, engineered and manufactured especially for oil

and gas pipeline application. Manufactured at our API certified facility, all DHV Trunnion Ball Valves provide

excellent corrosion resistance and superior sealing performance at both high and low pressures. DHV offers

a wide variety of material options to meet your critical needs from Carbon Steel to Duplex Stainless Steel and

Inconel, available DHV sizes from 2˝ to 48˝ in ANSI class 150-2500. DHV Trunnion Ball Valves are equipped

with standard features of Double Block & Bleed, Fire Safe, Emergency Sealant Injections, NACE MR0175

compliance and ISO mounting pads to all bare stem valves for gear or actuator adaption. We are ready and

eager to meet your special feature requirement like extended Stem/Bonnet, Transition Pups, Metal Seated,

Fully Welded Body and Actuation.

DHV Top Entry Trunnion Mounted Ball Valve is specially designed and developed for lower operating torque

and easy maintenance to meet the demands of our oil and gas pipeline customers. DHV one piece heavy

duty quality body offers convenient access to the stem and ball for on-site maintenance. DHV Top Entry Ball

Valve is available in various combinations of flanged or weld end connections from sizes 2˝ to 30˝, ANSI 150-

1500LB. Standard Features for DHV Top Entry Ball Valve include Double Block & Bleed, Fire Safe Design,

Emergency Sealant Injection, NACE MR0175 compliance and ISO Mounting pad. Extended stem/bonnet for

underground service is a typical option feature DHV Top Entry Ball Valve offers.

•

•

Trunnion Mounted Ball ValvesOne-Piece, Cast Steel Body, Class 150/300 Top Entry

Class 150 / 300 NPS 11/2˝FP 2˝RP 2˝FP 3˝RP 3˝FP 4˝RP 4˝FP 6˝RP 6˝FP 8˝RP 8˝FP 10˝RP 10˝FP 12˝RP 12˝FP

Bore inch 1.5 1.5 2.0 2.0 3.0 3.0 4.0 4.0 6.0 6.0 8.0 8.0 10.0 10.0 12.0

Size mm 38 38 51 51 76 76 102 102 152 152 203 203 254 254 305

L 150LB 241 178 292 203 356 229 432 394 559 457 660 533 787 610 838

(mm) 300LB 241 216 292 283 356 305 432 403 559 502 660 568 787 648 838

inch 3.5 3.5 4.1 4.1 4.9 4.9 5.9 5.9 7.2 7.2 10.8 10.8 12.5 12.5 14.3H1

mm 90 90 105 105 125 125 151 151 184 184 274 274 318 318 362

inch 4.9 4.9 5.6 5.6 7.7 7.7 8.6 8.6 11.3 11.3 16.0 16.0 17.7 17.7 20.1H2

mm 125 125 142 142 195 195 219 219 286 286 407 407 450 450 510

inch 17.7 17.7 17.7 17.7 23.6 23.6 23.6 23.6 39.4 39.4 - - - - -C

mm 450 450 450 450 600 600 600 600 1000 1000 - - - - -

inch - - - - - - - - - - 19.7 19.7 19.7 19.7 27.6D

mm - - - - - - - - - - 500 500 500 500 700

Weight 150LB 14.2 10.3 24.5 19.8 44 37 87 80 194 182 382 369 613 595 886

(kg) 300LB 16.4 12.6 30 25.2 52 47 100 94 208 201 405 400 668 656 923

Class 150 / 300 NPS 14˝FP 14˝RP 16˝FP 16˝RP18˝FP 18˝RP 20˝FP 20˝RP 24˝FP 26˝FP 28˝FP 30˝FP 32˝FP 34˝FP 36˝FP

Bore inch 12 13.25 13.25 15.25 15.25 17.25 17.25 19.25 23.25 25 27 29 30.75 32.75 34.5

Size mm 305 337 337 387 387 438 438 489 591 635 686 737 781 832 876

L 150LB 889 686 991 762 1092 864 1194 914 1397 1448 1549 1651 1778 1930 2083

(mm) 300LB 889 762 991 838 1092 914 1194 991 1397 1448 1549 1651 1778 1930 2083

inch 14.3 16.9 16.9 17.7 17.7 18.6 18.6 22.8 23.6 25.0 27.6 30.5 32.5 34.6 36.6H1

mm 362 428 428 450 450 473 473 580 600 635 700 775 825 880 930

inch 20.1 20.4 20.4 20.4 20.4 22.7 22.7 24.6 27.4 30.1 32.5 34.1 39.8 41.2 43.4H2

mm 510 517 517 519 519 577 577 626 696 765 825 865 1012 1047 1103

inch - - - - - - - - - - - - - - -C

mm - - - - - - - - - - - - - - -

inch 27.6 27.6 27.6 27.6 27.6 27.6 27.6 27.6 27.6 27.6 27.6 27.6 24.4 24.4 24.4D

mm 700 700 700 700 700 700 700 700 700 700 700 700 620 620 620

Weight 150LB 955 795 1160 955 1800 1570 2440 2000 3300 3970 4755 5820 7240 7960 9300

(kg) 300LB 1120 932 1518 1360 2110 1840 2860 2340 3870 4655 5575 6825 8490 9335 10900

32




Trunnion Mounted Ball ValvesTwo-Piece, Cast Steel Body, Trunnion Ball Valve

Component Parts Lists

No. Parts

1 Body

2 Body Cap

3 Lower Cover

4 Ball

5 Seat Insert

6 Stem

7 Trunnion

8 Seat Retainer

9 Thrust Bearing

10 Gasket

11 Stem Bushing

12 Trunnion Bushing

13 Stem O-Ring

14 Thrust Washer

15 Gland O-Ring

17 Gland

18 Gland Bolt

19 Plate / Coil Spring

20 O-Ring

21 Stud

22 Nut

23 Drain Fitting

24 Key

Trunnion Mounted Ball ValvesOne-Piece, Cast Steel Body, Top Entry

Material Specification Carbon St. Body Stainless St. Body

No. Parts NameCS NACE TRIM S.S. TRIM Duplex S.S. / SUPER Duplex S.S. TRIM

S.S TRIMSOUR SERVICE SOUR SERVICE SOUR SERVICE SOUR SERVICE

1 Body A216 WCB / +ENP A216 WCB+ENP A351 CF8M / CF8

2 Bonnet

3Ball C.S+ENP A182 F6 / 316SS / 304SS A182 F51 / F53+HCr 316SS / 304SS

Stem / Trunnion C.S+ENP A182 F6 / 316SS / 304SS A182 F51 / F53+HCr 316SS / 304SS

4 Seat Insert PTFE / R-PTFE / NYLON / DEVLON / PEEK5 Seat Retainer A105+ENP A182 F6 / 316SS / 304SS A182 F51 / F53 316SS / 304SS

6 Seat Spring INCONEL X7507 Gland A105 / A105+ENP 316 SS / 304SS

8 Injection Fitting 4140 / 316SS (with an Internal Check Valve) 316 SS

9 Lower Cover A105 + ENP 316 SS / 304 SS

12 O-ring VITON-B15 Backup Ring R-PTEE

17 Gasket Metal Backed PTFE / Graphite20 Packing Graphite23 Stem Bearing R-PTFE

25 Stud A193 B7M A193 B8 / B8M26 Nut A194 2HM A194 8 / 8M33 Drain Fitting 316SS

34 Anti-Static Device STAINLESS STEEL

31

Note: Other Material Standard can be Supplied Upon Request. T.C: TUNGSTEN-CARBIDE HCr: HARD CHROMIUM PLATING


24

13


Carbon St. Body

CS NACE TRIM S.S. TRIMDuplex S.S. / SUPER

No. PartsSOUR SERVICE SOUR SERVICE

Duplex S.S. TRIMSOUR SERVICE

1 Body2 Body Cap A216 WCB / A216 WCB+ENP3 Lower Cover4 Ball A105+ENP A182 F6 / 316SS / 304SS A182 F51 / F53 / A890 4A / 5A / 6A5 Seat Insert PTFE / R-PTFE / NYLON / DEVLON / PEEK6 Stem

A105 + ENP / 4140+ENP A182 F51 / F537 TrunnionA182 F6 / F316 / F304

8 Seat Retainer A105 + ENP17-4PH

A182 F51 / F539 Thrust Bearing Metal Backed PTFE / Graphite10 Gasket Metal & Flexible Graphite11 Sealant Injection Fitting, Seat 4140 / 316SS (with an Internal Check Valve)12 Trunnion Bushing Metal Backed PTFE13 Stem Packing Graphite14 Sealant Injection Fitting, Stem 4140 / 316SS (with an Internal Check Valve)15 Anti-Static Device Stainless Steel16 Gland Ring A105+ENP 410SS / 316SS / 304SS F51 / F5317 Gland A216 WCB18 Gland Bolt A193 B7M19 Spring INCONEL X75020 O-Ring VITON / NBR21 Stud A193 B7M22 Nut A194 2HM23 Drain Fitting 316SS24 Key AISI 1045 / 4140


Note: Other Material Standard can be Supplied Upon Request.

Stainless St. Body Duplex S.S. / SUPER Duplex S.S. Body Low Temp. St. Body

No. Parts S.S. TRIMDuplex S.S. / SUPER

CS NACE TRIM S.S. TRIMSOUR SERVICE

Duplex S.S. TRIMSOUR SERVICE SOUR SERVICESOUR SERVICE

1 Body2 Body Cap A351 CF8 / CF8M A890 4A / 5A / 6A A352 LCB / LCC / +ENP3 Lower Cover4 Ball 304SS / 316SS A182 F51 / F53 / A890 4A / 5A / 6A A350 LF2+ENP A182 F316 / A351 CF8M5 Seat Insert PTFE / R-PTFE / NYLON / DEVLON / PEEK6 Stem7 Trunnion F304 / F316 A182 F51 / F53 A350 LF2 + ENP A182 F3168 Seat Retainer9 Thrust Bearing Metal Backed PTFE / Graphite10 Gasket Metal & Flexible Graphite11 Sealant Injection Fitting, seat 316SS (with an Internal Check Valve)12 Trunnion Bushing

Metal Backed PTFE / Graphite13 Stem Packing14 Sealant Injection Fitting, Stem 316SS (with an Internal Check Valve)15 Anti-Static Device Stainless Steel16 Gland Ring 304SS / 316SS 316SS / F51 / F53

A350 LF2 / A352 LCB / A352 LCC+ENP17 Gland CF8 / CF8M A890 4A / 5A / 6A18 Gland Bolt A193 B8 / B8M A320 L7 / L7M19 Spring INCONEL X75020 O-Ring VITON / NBR / HNBR21 Stud A193 B8 / B8M A320 L7M22 Nut A194 8 / 8M A194 7M23 Drain Fitting 316SS24 Key AISI 1045 / 4140

30



1 BODY

2 BONNET

3 BALL WITH STEM/TRUNNION

4 SEAT INSERT

5 SEAT RETAINER

6 SEAT SPRING

7 GLAND

8 GLAND RING

9 LOW COVER

10 O-RING

11 O-RING

12 O-RING

13 O-RING

14 O-RING

15 BACK UP RING

16 GASKET

17 GASKET

18 BACK UP RING

19 SEALANT FITTING

20 PACKING

21 THRUST BEARING

22 STEM KEY

23 STEM BEARING

24 LEVER BAR

25 STUD

26 NUT

27 INTERNAL CHECK VALVE

28 HEAD BOLT

29 PACKING

30 CLOSURE PIN

31 THREE WAY HEAD

32 SNAP RING

33 DRAIN FITTING

34 ANTI-STATIC DEVICE

35 SEALANT FITTING



29

Two-Piece, Cast Steel Body, Metal-to-Metal Seat, Trunnion Ball Valve

Material SpecificationCarbon St. Body Stainless St. Body

No. PartsCS NACE TRIM SOUR S.S TRIM SOUR S.S TRIM SOUR Duples S.S TRIM SOUR

SERVICE SERVICE SERVICE SERVICE-5~300°C Max450°C Max450°C

1 BodyA216 WCB

A217 WC9 /A351 CF8 / CF8M

A351 CF8 / CF8M2 Body Cap A217 WC9+Inconel A890 4A / 5A / 6A

3 Ball A105+HCr / SFNi / T.C A351 CF8 / A182 F304+HCr / SFNi / T.C A890 4A / 5A / 6A / A182 F51 A351 CF8M / A182 F316+HCr / SFNi / T.C F53+HCr / SFNi / T.C

4 Stem A105+HCr / A182 F6a 17-4PH +HCrA182 F51 / F53+HCr

5 Trunnion +HCr A182 F51 / F53+HCr

6 Seat A105+STL / T.C A182 F304 / A182 F316+STL / T.C

A182 F51 / F53+STL / T.CA182 F51 / F53+STL / T.C

7 Spring Holder A105+ENP A182 F316 / F304 / F6a A182 F316 / F518 Spring INCONEL X-7509 Gland10 Gland Ring

A105+ENP A182 F316 / F304 / F6aA182 F316 / F304

11 Packing Ring A182 F51 / F5312 Lower Cover13 Drain Fitting 316SS14 Seal Ring R-PTFE Metal Metal15 Packing Fexible Graphite16 Gasket Metal & Flexible Graphite17 Stud A193 B7M A193 B8 / B8M18 Nut A194 2HM A194 8 / 8M19 Thrust Washer A182 F304 / F316 / F5120 Thrust Bearing21 Stem Bearing Metal Backed PTFE A182 316 (QPQ)22 Trunnion Bearing

-5~300°C

MAX 450°C


T.C: TUNGSTEN-CARBIDE QPQ: QUENCH-POLISH-QUENCH HCr: HARD CHROMIUM PLATING SFNi: Ni ALLOY OVERLAY

Trunnion Mounted Ball ValvesThree-Piece Forged Steel Body Side Entry Type SE-1 SE-3

Dimensions and weights Class 1500

Size L B B1 F E G H D WGT LbRF RTJ WE

2˝ x 11/2˝ 14.5 14.6 14.5 1.5 2.0 5.7 3.7 17.7 10.3 - 1062˝ 14.5 14.6 14.5 2.0 2.0 6.1 4.1 23.6 10.3 - 137

3˝ x 2˝ 18.5 18.6 18.5 2.0 3.0 6.1 4.1 23.6 10.3 - 1853˝ 18.5 18.6 18.5 3.0 3.0 7.7 5.1 39.4 10.6 - 258

4˝ x 3˝ 21.5 21.6 21.5 3.0 4.0 7.7 5.1 39.4 10.6 - 3634˝ 21.5 21.6 21.5 4.0 4.0 7.9 6.5 - 11.0 27.6 520

6˝ x 4˝ 27.8 28.0 27.8 4.0 5.75 7.9 6.5 - 11.0 27.6 7206˝ 27.8 28.0 27.8 5.75 5.75 10.2 9.0 - 12.5 27.6 1090

8˝ x 6˝ 32.8 33.1 32.8 5.75 7.625 10.2 9.0 - 12.5 27.6 13728˝ 32.8 33.1 32.8 7.625 7.625 13.2 11.9 - 16.1 27.6 1897

10˝ x 8˝ 39.0 39.4 39.0 7.625 9.5 13.2 11.9 - 16.1 27.6 244510˝ 39.0 39.4 39.0 9.5 9.5 15.4 13.8 - 18.4 27.6 3075

12˝ x 10˝ 44.5 45.1 44.5 9.5 11.375 15.4 13.8 - 18.4 27.6 340312˝ 44.5 45.1 44.5 11.375 11.375 19.4 16.8 - 22.3 27.6 4405

14˝ x 12˝ 49.5 50.2 49.5 11.375 12.5 19.4 16.8 - 22.3 27.6 576416˝ x 12˝ 54.5 55.4 54.5 11.375 14.25 19.4 16.8 - 22.3 27.6 6358

14˝ 49.5 50.2 49.5 12.5 12.5 18.5 19.0 - 22.0 27.6 664416˝ 54.5 55.4 54.5 14.25 14.25 20.6 21.2 - 24.2 27.6 937218˝ 60.5 61.4 60.5 16.0 16.0 23.4 23.9 - 29.5 55.1 1408020˝ 65.5 66.4 65.5 18.0 18.0 26.8 27.4 - 32.9 55.1 2046024˝ 80.4 81.5 80.4 21.0 21.0 29.8 30.5 - 40.5 55.1 32010


Size L B B1 F E H D WGT LbRF RTJ WE2˝ x 11/2˝ 17.8 17.9 17.8 1.5 1.75 5.5 3.7 7.8 11.8 143

2˝ 17.8 17.9 17.8 1.75 1.75 5.7 6.7 7.8 11.8 1923˝ x 2˝ 22.8 23.0 22.8 1.75 2.5 5.7 6.7 7.8 27.6 363

3˝ 22.8 23.0 22.8 2.5 2.5 7.5 8.1 9.6 27.6 4734˝ x 3˝ 26.5 26.9 26.5 2.5 3.5 7.5 8.1 9.6 27.6 714

4˝ 26.5 26.9 26.5 3.5 3.5 8.9 9.4 11.0 27.6 8976˝ x 4˝ 36.0 36.5 36.0 3.5 5.25 8.9 9.4 11.0 27.6 1188

6˝ 36.0 36.5 36.0 5.25 5.25 12.0 11.2 15.0 27.6 18268˝ x 6˝ 40.2 40.9 40.2 5.25 7.125 12.0 11.2 15.0 27.6 2379

8˝ 40.2 40.9 40.2 7.125 7.125 15.7 14.6 18.7 27.6 315710˝ x 8˝ 50.0 50.9 50.0 7.125 8.875 15.7 14.6 18.7 27.6 3850

10˝ 50.0 50.9 50.0 8.875 8.875 18.5 17.1 22.0 27.6 488412˝ x 10˝ 56.0 56.9 56.0 8.875 10.5 18.5 17.1 22.0 27.6 5830

12˝ 56.0 56.9 56.0 10.5 10.5 21.3 19.5 27.2 24.4 7370 Note: Dimensions in inch. Weights in pound

SE-3SE-1

DHV Industries, Inc.DHV Industries, Inc.15 28

Two-Piece Cast Steel Body Class 150-300 Full Bore


Class 150 Size 2˝ 3˝ 4˝ 6˝ 8˝ 10˝ 12˝ 14˝ 16˝ 18˝ 20˝ 24˝

Bore Sizein 2.0 3.0 4.0 6.0 8.0 10.0 12.0 13.25 15.25 17.25 19.25 23.25

mm 51 76 102 152 203 254 305 337 387 438 489 591

Lin 7.0 8.0 9.0 15.5 18.0 21.0 24.0 27.0 30.0 34.0 36.0 42.0

mm 178 203 229 394 457 533 610 686 762 864 914 1067H1 in 4.8 6.8 7.8 11.7 11.8 12.8 14.4 15.7 17.3 19.7 21.8 21.8H2 in 3.2 4.1 5.1 8.4 15.3 15.9 17.9 19.3 21.6 24.4 26.8 26.8C in 11 15.75 25.6 41.3 - - - - - - - -D in - - - - 23.6 23.6 31.5 32.5 33.5 34.5 35.5 35.5

Weightlb 24.2 50.6 95 242 496 727 1079 1333 1963 2471 3260 5330kg 11 23 43 110 225 330 490 605 891 1122 1480 2420

Class 150 Size 26˝ 28˝ 30˝ 32˝ 34˝ 36˝ 40˝ 42˝ 48˝

Bore Sizein 25 27 29 30.75 32.75 36.5 38.5 40.25 46

mm 635 686 737 781 832 927 978 1022 1168

Lin 45 49 51 54 58 60 69 73 84

mm 1143 1245 1295 1372 1473 1524 1753 1855 2134H1 in 24.9 26.4 27.8 29.6 31.0 32.2 35.7 37.0 41.9H2 in 27.0 28.5 30.6 36.3 37.6 38.8 41.8 43.0 47.9C in - - - - - - - - -D in 35.5 35.5 35.5 35.5 31.5 31.5 55.1 55.1 55.1

Weightlb 5727 7511 12500 14210 17390 20260 25850 30460 42320kg 2600 3410 5670 6450 7890 9190 11730 13820 19200

Class 300 Size 2˝ 3˝ 4˝ 6˝ 8˝ 10˝ 12˝ 14˝ 16˝ 18˝ 20˝ 24˝

Bore Sizein 2.0 3.0 4.0 6.0 8.0 10.0 12.0 13.25 15.25 17.25 19.25 23.25

mm 51 76 102 152 203 254 305 337 387 438 489 591

Lin 8.5 11.0 12.0 16.0 20.0 22.5 25.5 30.0 33.0 36.0 39.0 45.0

mm 216 283 305 403 502 568 648 762 838 914 991 1143H1 in 4.8 6.8 7.8 10.2 11.8 12.8 14.4 15.75 17.3 19.7 21.8 21.8H2 in 3.2 4.1 5.1 13.4 15.3 15.9 17.9 19.3 21.6 24.4 26.8 26.8C in 11.0 15.7 25.6 - - - - - - - - -D in - - - 17.7 23.6 23.6 31.5 32.5 33.5 34.5 35.5 35.5

Weightlb 37.4 77 134 300 577 886 1284 1793 2489 3278 3731 6300kg 17 35 61 136 262 402 583 814 1130 1488 1694 2860

Class 300 Size 26˝ 28˝ 30˝ 32˝ 34˝ 36˝ 40˝ 42˝ 48˝

Bore Sizein 25 27 29 30.75 32.75 36.5 38.5 40.25 46

mm 635 686 737 781 832 927 978 1022 1168

Lin 49 53 55 60 64 68 77 82 85

mm 1245 1346 1379 1524 1626 1727 1956 2083 2170H1 in 25.7 26.9 28.3 29.7 31.1 32.2 35.8 37.4 42.6H2 in 31.7 32.6 34.1 35.7 36.2 37.6 41.9 43.3 53.3C in - - - - - - - - -D in 31.5 31.5 55.1 55.1 55.1 55.1 55.1 55.1 55.1

Weightlb 7269 9449 11630 14900 18250 21250 27130 31960 44430kg 3300 4290 5280 6760 8280 9640 12310 14500 20160





2˝ x 11/2˝ 14.5 14.6 14.5 1.5 2.0 5.7 3.7 17.7 10.3 - 1212˝ 14.5 14.6 14.5 2.0 2.0 6.1 4.1 23.6 10.3 - 137

3˝ x 2˝ 15.0 15.1 15.0 2.0 3.0 6.1 4.1 23.6 10.3 - 1523˝ 15.0 15.1 15.0 3.0 3.0 7.7 5.1 39.4 10.6 - 194

4˝ x 3˝ 18.0 18.1 18.0 3.0 4.0 7.7 5.1 39.4 10.6 - 2384˝ 18.0 18.1 18.0 4.0 4.0 7.9 6.5 - 11.0 19.7 282

6˝ x 4˝ 24.0 24.1 24.0 4.0 6.0 7.9 6.5 - 11.0 19.7 4106˝ 24.0 24.1 24.0 6.0 6.0 10.6 8.0 - 12.8 27.6 780

8˝ x 6˝ 29.0 29.1 29.0 6.0 8.0 10.6 8.0 - 12.8 27.6 9678˝ 29.0 29.1 29.0 8.0 8.0 11.6 10.2 - 14.0 27.6 1311

10˝ x 8˝ 33.0 33.1 33.0 8.0 10.0 11.6 10.2 - 14.0 27.6 154910˝ 33.0 33.1 33.0 10.0 10.0 15.4 12.6 - 17.7 27.6 2100

12˝ x 10˝ 38.0 38.1 38.0 10.0 12.0 15.4 12.6 - 17.7 27.6 248012˝ 38.0 38.1 38.0 12.0 12.0 17.6 14.8 - 20.5 27.6 3222

14˝ x 12˝ 40.5 40.9 40.5 12.0 12.75 17.6 14.8 - 20.5 27.6 358316˝ x 12˝ 44.5 44.9 44.5 12.0 14.75 17.6 14.8 - 20.5 27.6 3744

14˝ 40.5 40.9 47.6 12.75 12.75 14.8 16.5 - 17.8 27.6 380816˝ x 14˝ 44.5 44.9 44.5 12.75 14.75 14.8 16.5 - 17.8 27.6 3960

16˝ 44.5 44.9 44.5 14.75 14.75 18.1 18.5 - 21.6 27.6 492818˝ x 16˝ 48.0 48.5 48.0 14.75 16.75 18.1 18.5 - 21.6 27.6 629020˝ x 16˝ 52.0 52.5 52.0 14.75 18.625 18.1 18.5 - 21.6 27.6 6534

18˝ 48.0 48.5 48.0 16.75 16.75 19.8 20.1 - 23.4 27.6 660020˝ x 18˝ 52.0 52.5 52.0 16.75 18.625 19.8 20.1 - 23.4 27.6 7480

20˝ 52.0 52.5 52.0 18.625 18.625 21.9 22.1 - 28.0 55.1 959224˝ x 20˝ 61.0 61.7 61.0 18.625 22.5 21.9 22.1 - 28.0 55.1 12276

24˝ 61.0 61.7 61.0 22.5 22.5 25.2 25.6 - 31.3 55.1 1546630˝ x 24˝ 74.0 74.9 74.0 22.5 28.125 25.2 25.6 - 31.3 55.1 8980

26˝ 65.0 65.9 65.0 24.375 24.375 26.8 27.1 - 32.9 55.1 827028˝ 69.0 69.9 69.0 26.25 26.25 28.5 28.9 - 34.6 55.1 1020030˝ 74.0 74.9 74.0 28.125 28.125 30.5 31.1 - 41.2 55.1 12440

36˝ x 30˝ 90.0 91.1 90.0 28.125 33.75 30.5 31.1 - 41.2 55.1 1565032˝ 80.0 80.9 80.0 30.0 30.0 32.3 32.4 - 43.0 55.1 1210034˝ 85.0 86.1 85.0 31.875 31.875 33.8 33.9 - 44.4 55.1 1746036˝ 90.0 91.1 90.0 33.75 33.75 35.4 35.4 - 46.1 55.1 20150

Note: Dimensions in inch. Weights in pound

SE-3SE-1




Class 600 Size 2˝ 3˝ 4˝ 6˝ 8˝ 10˝ 12˝ 14˝ 16˝ 18˝ 20˝ 24˝

Bore Sizein 2.0 3.0 4.0 6.0 8.0 10.0 12.0 13.25 15.25 17.25 19.25 23.25

mm 51 76 102 152 203 254 305 337 387 438 489 591

Lin 11.5 14.0 17.0 22.0 26.0 31.0 33.0 35.0 39.0 43.0 47.0 55.0

mm 292 356 432 559 660 787 838 889 991 1092 1194 1397H1 in 4.5 5.2 6.0 8.5 11.6 14.6 16.5 18.1 19.9 22.1 24.8 24.8H2 in 6.6 7.8 11.0 12.9 14.7 17.5 20.3 21.6 24.2 27.6 31.9 31.9C in 15.7 25.6 - - - - - - - - - -D in - - 17.7 23.6 31.5 32.5 33.5 34.5 35.5 36.5 37.5 37.5

Weightlb 73 130 223 533 848 1454 1987 2730 3756 5088 6784 12841kg 33 59 101 242 385 660 902 1243 1705 2310 3080 5830

Class 600 Size 26˝ 28˝ 30˝ 32˝ 34˝ 36˝ 40˝ 42˝

Bore Sizein 25 27 29 30.75 32.75 36.5 38.5 40.25

mm 635 686 737 781 832 927 978 1022

Lin 57 61 65 70 76 82 92 96

mm 1448 1549 1651 1778 1930 2083 2337 2437H1 in 25.6 27.0 28.6 30.2 31.7 33.0 36.9 38.5H2 in 31.2 32.9 34.9 36.0 37.4 38.9 47.7 53.3C in - - - - - - - -D in 31.5 31.5 31.5 55.1 55.1 55.1 55.1 55.1

Weightlb 13436 15749 17930 18670 22830 28634 33990 40070kg 6100 7150 8140 8470 10360 13000 15420 18180


Class 900 Size 2˝ 3˝ 4˝ 6˝ 8˝ 10˝ 12˝ 14˝ 16˝ 18˝ 20˝ 24˝ 26˝ 28˝ 30˝

Bore Sizein 2.0 3.0 4.0 6.0 8.0 10 12 12.75 14.75 16.75 18.625 22.5 24.375 26.25 28.125

mm 51 76 102 152 203 254 305 324 375 425 473 572 619 667 714

Lin 14.5 15.0 18.0 24.0 29.0 33 38 40.5 44.5 48 52 61 65 69 74

mm 368 381 457 610 737 838 965 1029 1130 1219 1321 1549 1651 1753 1880H1 in 5.0 7.5 8.5 10.6 10.6 16.5 18.5 20.1 23.6 27.6 28.3 31.9 27.1 28.9 31.1H2 in 8.5 10.2 11.7 14.2 14.2 19.8 22.5 26.6 30.0 34.1 35.2 37.6 32.9 34.6 41.2C in 25.6 25.6 - - - - - - - - - - - - -D in - - 23.6 23.6 23.6 31.5 31.5 31.5 31.5 31.5 31.5 31.5 37.4 37.4 37.4

Weightlb 139 176 275 749 1100 2357 3546 3436 4934 6608 9604 15485 18216 22467 27401kg 63 80 125 340 500 1070 1610 1560 2240 3000 4360 7030 8270 10200 12440

Class 1500 Size 2˝ 3˝ 4˝ 6˝ 8˝ 10˝ 12˝ 14˝ 16˝ 18˝ 20˝ 24˝

Bore Sizein 2.0 3.0 4.0 5.75 7.62 9.5 11.375 12.5 14.25 16 18 21

mm 51 76 102 146 194 241 289 318 362 407 457 534

Lin 14.5 18.5 21.5 27.8 32.75 39 44.5 49.5 54.5 60.5 65.5 80.4

mm 368 470 546 705 832 991 1130 1257 1384 1537 1664 2043H1 in 5.0 7.5 8.5 11.7 11.7 19.5 21.3 23.2 26.4 28.0 29.5 33.5H2 in 8.5 10.2 11.7 14.4 14.4 22.8 27.4 30.0 32.7 35.4 37.4 42.5C in 25.6 - - - - - - - - - - -D in - 23.6 23.6 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5

Weightlb 148 330 540 863 1420 2114 3304 4009 5066 6409 10771 16850kg 67 150 245 392 645 960 1500 1820 2300 2910 4890 7650




2˝ x 11/2˝ 11.5 11.6 11.5 1.5 2.0 5.7 3.7 17.7 9.3 - 572˝ 11.5 11.6 11.5 2.0 2.0 6.1 4.1 23.6 9.3 - 71

3˝ x 2˝ 14.0 14.1 14.0 2.0 3.0 6.1 4.1 23.6 9.3 - 1063˝ 14.0 14.1 14.0 3.0 3.0 7.7 5.1 39.4 11.0 - 132

4˝ x 3˝ 17.0 17.1 17.0 3.0 4.0 7.7 5.1 39.4 11.0 - 1834˝ 17.0 17.1 17.0 4.0 4.0 9.1 6.5 39.4 12.0 - 271

6˝ x 4˝ 22.0 22.1 22.0 4.0 6.0 9.1 6.5 39.4 12.0 - 3726˝ 22.0 22.1 22.0 6.0 6.0 9.9 7.4 - 12.0 27.6 615

8˝ x 6˝ 26.0 26.1 26.0 6.0 8.0 9.9 7.4 - 12.0 27.6 7368˝ 26.0 26.1 26.0 8.0 8.0 12.2 9.6 - 14.4 27.6 980

10˝ x 8˝ 31.0 31.1 31.0 8.0 10.0 12.2 9.6 - 14.4 27.6 122010˝ 31.0 31.1 31.0 10.0 10.0 12.8 11.4 - 15.2 27.6 1696

12˝ x 10˝ 33.0 33.1 33.0 10.0 12.0 12.8 11.4 - 15.2 27.6 198212˝ 33.0 33.1 33.0 12.0 12.0 14.9 13.5 - 17.2 27.6 2341

14˝ x 12˝ 35.0 35.1 35.0 12.0 13.25 14.9 13.5 - 17.2 27.6 273816˝ x 12˝ 39.0 39.1 39.0 12.0 15.25 14.9 13.5 - 17.2 27.6 2919

14˝ 35.0 35.1 35.0 13.25 13.25 14.1 15.9 - 17.1 27.6 303716˝ x 14˝ 39.0 39.1 39.0 13.25 15.25 14.1 15.9 - 17.1 27.6 3350

16˝ 39.0 39.1 39.0 15.25 15.25 15.6 17.4 - 18.6 27.6 381718˝ x 16˝ 43.0 43.1 43.0 15.25 17.25 15.6 17.4 - 18.6 27.6 388320˝ x 16˝ 47.0 47.2 47.0 15.25 19.25 15.6 17.4 - 18.6 27.6 4774

18˝ 43.0 43.1 43.0 17.25 17.25 19.0 19.2 - 22.6 27.6 604420˝ x 18˝ 47.0 47.2 47.0 17.25 19.25 19.0 19.2 - 22.6 27.6 6500

20˝ 47.0 47.2 47.0 19.25 19.25 19.8 20.7 - 23.5 27.6 773024˝ x 20˝ 55.0 55.4 55.0 19.25 23.25 19.8 20.7 - 23.5 27.6 8600

22˝ 51.0 51.4 51.0 21.25 21.25 22.2 22.6 - 29.0 55.1 992724˝ 55.0 55.4 55.0 23.25 23.25 23.8 24.1 - 29.9 55.1 12841

30˝ x 24˝ 65.0 65.5 65.0 23.25 29.0 23.8 24.1 - 29.9 55.1 1300226˝ 57.0 57.5 57.0 25.0 25.0 25.1 25.6 - 31.2 55.1 1301228˝ 61.0 61.5 61.0 27.0 27.0 27.0 27.0 - 32.9 55.1 1571030˝ 65.0 65.5 65.0 29.0 29.0 28.6 28.6 - 34.9 55.1 18830

36˝ x 30˝ 82.0 82.6 82.0 29.0 34.5 28.6 28.6 - 34.9 55.1 2323032˝ 70.0 70.6 70.0 30.75 30.75 29.9 30.2 - 36.0 55.1 2187034˝ 76.0 76.6 76.0 32.75 32.75 31.3 31.7 - 37.4 55.1 2545536˝ 82.0 82.6 82.0 34.5 34.5 32.8 33.0 - 38.9 55.1 2976540˝ 85.4 - 85.4 38.43 38.43 36.1 38.6 - 47.7 55.1 4033742˝ 85.6 - 85.6 40.16 40.16 39.2 43.7 - 53.3 55.1 46983

SE-3SE-1



Trunnion Mounted Ball ValvesTwo-Piece Cast Steel Body Class 150-300 Reduced Bore

Class 150 NPS 2˝x11/2˝ 3˝x2˝ 4˝x3˝ 6˝x4˝ 8˝x6˝ 10˝x8˝ 12˝x10˝ 14˝x12˝ 16˝x12˝ 16˝x14˝ 18˝x16˝ 20˝x16˝ 20˝x18˝

Bore Sizein 1.5 2.0 3.0 4.0 6.0 8.0 10.0 12.0 12.0 13.25 15.25 15.25 17.25

mm 38 51 76 102 152 203 254 305 305 337 387 387 438

Lin 7.0 8.0 9.0 15.5 18.0 21.0 24.0 27.0 39.5 30.0 34.0 36.0 36.0

mm 178 203 229 394 457 533 610 686 762 762 864 914 914H1 in 4.8 4.8 6.8 7.8 11.7 15.1 12.8 14.4 14.4 15.7 17.3 17.3 19.7H2 in 3.2 3.2 4.1 5.1 8.4 10.1 15.9 17.9 17.9 19.3 21.6 21.6 24.4C in 11.0 11.0 15.75 25.6 41.3 55.5 - - - - - - -D in - - - - - - 23.6 31.5 31.5 32.5 33.5 33.5 34.5

Weightlb 24 37.4 73 145 286 524 751 1139 1234 1430 2011 2225 2511kg 11 17 33 66 130 238 341 517 560 649 913 1010 1140

Class 150 NPS 24˝x20˝ 26˝x24˝ 30˝x24˝ 28˝x26˝ 30˝x28˝ 32˝x30˝ 36˝x30˝ 34˝x32˝ 36˝x34˝ 40˝x36˝ 42˝x40˝ 48˝x42˝

Bore Sizein 19.25 23.25 23.25 25 27 29 29 30.75 32.75 36.5 38.5 40.25

mm 489 591 591 635 686 737 737 781 832 927 978 1022

Lin 42.0 45 51 49 51 54 60 58 60 69 73 84

mm 1067 1143 1295 1245 1295 1372 1524 1473 1524 1753 1855 2134H1 in 21.8 21.8 218 24.9 26.4 27.8 27.8 29.6 31.0 32.2 35.7 37.0H2 in 26.8 26.8 26.8 27.0 28.5 30.6 30.6 36.3 37.6 38.8 41.8 43.0C in - - - - - - - - - - - -D in 35.5 35.5 35.5 35.5 35.5 35.5 35.5 35.5 35.5 35.5 55.1 55.1

Weightlb 3998 5617 6784 9030.8 11167 13150 9934 15793 18811 23039.6 28139 36366kg 1815 2550 3080 4100 5070 5970 4510 7170 8540 10460 12775 16510


Bore Sizein 1.5 2.0 3.0 4.0 6.0 8.0 10.0 12.0 12.0 13.25 15.25 15.25 17.25

mm 38 51 76 102 152 203 254 305 305 337 387 387 438

Lin 8.5 11.1 12.0 16.0 20.0 22.5 25.5 30.0 33.0 33.0 36.0 39.0 39.0

mm 216 283 305 403 502 568 648 762 838 838 914 991 991H1 in 4.5 4.8 6.8 7.8 11.7 11.8 12.8 14.4 14.4 15.75 17.3 17.3 19.7H2 in 2.9 3.2 4.1 5.1 8.4 15.3 15.9 17.9 17.9 19.3 21.6 21.6 24.4C in 11.0 11.0 15.7 25.6 41.3 55.5 - - - - - - -D in - - - - - - 23.6 31.5 31.5 32.5 33.5 33.5 34.5

Weightlb 26.4 57.2 105.6 198 408 627 921 1405 1564 1890 2665 2906 3295kg 12 26 48 90 185 285 418 638 710 858 1210 1320 1496


Bore Sizein 19.25 23.25 23.25 25 27 29 29 30.75 32.75 36.5 38.5 40.25

mm 489 591 591 635 686 737 737 781 832 927 978 1022

Lin 45.0 49 55 53 55 60 68 64 68 77 82 85

mm 1143 1245 1379 1346 1379 1524 1727 1626 1727 1956 2083 2170H1 in 21.8 21.8 21.8 25.7 26.9 28.3 28.3 29.7 31.1 32.2 35.8 37.4H2 in 26.8 26.5 26.5 31.7 32.6 34.1 34.1 35.7 36.2 37.6 41.9 43.3C in - - - - - - - - - - - -D in 35.5 35.5 35.5 35.5 35.5 55.1 55.1 55.1 55.1 55.1 55.1 55.1

Weightlb 4725 7610.1 8480 10441 12247 13998 13084 16564 19736 24174 29526 38172kg 2145 3455 3850 4740 5560 6355 5940 7520 8960 10975 13405 17330





2˝ x 11/2˝ 8.5 9.1 8.5 1.5 2.0 5.5 3.7 17.7 9.3 - 462˝ 8.5 9.1 8.5 2.0 2.0 6.1 4.1 17.7 9.3 - 61.6

3˝ x 2˝ 11.1 11.7 11.1 2.0 3.0 6.1 4.1 17.7 9.3 - 793˝ 11.1 11.7 11.1 3.0 3.0 7.7 5.1 23.6 10.6 - 102

4˝ x 3˝ 12.0 12.6 12.0 3.0 4.0 7.7 5.1 23.6 10.6 - 1214˝ 12.0 12.6 12.0 4.0 4.0 9.1 6.5 39.4 12.0 - 160

6˝ x 4˝ 15.9 16.5 18.0 4.0 6.0 9.1 6.5 39.4 12.0 2126˝ 15.9 16.5 18.0 6.0 6.0 9.9 7.4 - 12.4 19.7 344

8˝ x 6˝ 19.8 20.4 20.5 6.0 8.0 9.9 7.4 - 12.4 19.7 4688˝ 19.8 20.4 20.5 8.0 8.0 10.8 8.7 - 13.0 27.6 670

10˝ x 8˝ 22.4 23.0 22.0 8.0 10.0 10.8 8.7 - 13.0 27.6 75810˝ 22.4 23.0 22.0 10.0 10.0 13.1 10.6 - 15.2 27.6 1145

12˝ x 10˝ 25.5 26.1 25.0 10.0 12.0 13.1 10.6 - 15.2 27.6 136412˝ 25.5 26.1 25.0 12.0 12.0 14.9 12.4 - 17.0 27.6 1740

14˝ x 12˝ 30.0 30.6 30.0 12.0 13.25 14.9 12.4 - 17.0 27.6 189216˝ x 12˝ 33.0 33.6 33.0 12.0 15.25 14.9 12.4 - 17.0 27.6 2222

14˝ 30.0 30.6 30.0 13.25 13.25 15.0 13.5 - 17.3 27.6 239816˝ x 14˝ 33.0 33.6 33.0 13.25 15.25 15.0 13.5 - 17.3 27.6 2618

16˝ 33.0 33.6 33.0 15.25 15.25 16.9 15.6 - 19.8 27.6 325618˝ x 16˝ 36.0 36.6 36.0 15.25 17.25 16.9 15.6 - 19.8 27.6 363020˝ x 16˝ 39.0 39.8 39.0 15.25 19.25 16.9 15.6 - 19.8 27.6 3784

18˝ 36.0 36.6 36.0 17.25 17.25 17.3 18.9 - 20.3 27.6 419820˝ x 18˝ 39.0 39.8 39.0 17.25 19.25 17.3 18.9 - 20.3 27.6 4318

20˝ 39.0 39.8 39.0 19.25 19.25 19.6 20.6 - 23.1 27.6 503824˝ x 20˝ 45.0 45.9 45.0 19.25 23.25 19.6 20.6 - 23.1 27.6 6050

22˝ 43.0 43.9 43.0 21.25 21.25 20.6 22.1 - 24.2 27.6 633624˝ 45.0 45.9 45.0 23.25 23.25 23.0 23.7 - 26.5 27.6 7942

30˝ x 24˝ 55.0 56.0 55.0 23.25 29.0 23.0 23.7 - 26.5 27.6 1018626˝ 49.0 50.0 49.0 25.0 25.0 24.9 25.7 - 31.7 24.4 1058228˝ 53.0 54.0 53.0 27.0 27.0 26.5 26.9 - 32.6 55.1 1302030˝ 55.0 56.0 55.0 29.0 29.0 28.0 28.3 - 34.1 55.1 14830

36˝ x 30˝ 68.0 69.1 68.0 29.0 34.5 28.0 28.3 - 34.1 55.1 1833032˝ 60.0 61.1 60.0 30.75 30.75 29.6 29.7 - 35.7 55.1 1778034˝ 64.0 65.1 64.0 32.75 32.75 30.1 31.1 - 36.2 55.1 2037036˝ 68.0 69.1 68.0 34.5 34.5 31.5 32.2 - 37.6 55.1 2262040˝ 77 - 77 38.43 38.43 35.4 36.2 - 41.8 55.1 3030542˝ 82 - 82 40.16 40.16 38.1 37.4 - 43.3 55.1 35431


SE-3SE-1




Class 900 NPS 2˝x11/2˝ 3˝x2˝ 4˝x3˝ 6˝x4˝ 8˝x6˝ 10˝x8˝ 12˝x10˝ 14˝x12˝ 16˝x12˝ 16˝x14˝ 18˝x16˝ 20˝x16˝ 20˝x18˝ 24˝x20˝ 26˝x24˝ 30˝x24˝ 28˝x26˝ 30˝x28˝

Bore Sizein 1.5 2.0 3.0 4.0 6.0 8.0 10 12 12 12.75 14.75 14.75 16.75 18.625 22.5 22.5 24.375 26.25

mm 38 51 76 102 152 203 254 305 305 324 375 375 425 473 572 572 619 667

Lin 14.5 15.0 18.0 24.0 29.0 33 38 40.5 44.5 44.5 48 52 52 61 65 74 69 74

mm 368 381 457 610 737 838 965 1029 1130 1130 1219 1321 1321 1549 1651 1880 1753 1880

H1 in 5.0 5.0 7.5 8.5 8.5 10.6 16.5 18.5 18.5 20.1 23.6 23.6 27.6 28.3 31.9 36.9 27.1 28.9

H2 in 8.5 8.5 10.2 11.7 11.7 14.2 19.8 22.5 22.5 26.6 30.0 30.0 34.1 35.2 37.6 37.6 32.9 34.6

C in 25.6 25.6 25.6 - - - - - - - - - - - - - - -

D in - - - 23.6 23.6 23.6 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 37.4 37.4 37.4 37.4

Weightlb 83.6 159 258 639 958 1289 2015 2632 2907 3965 5551 6278 7489 12291 16850 17863 20341 24934

kg 38 72 117 290 435 585 915 1195 1320 1800 2520 2850 3400 5580 7650 8110 9235 11320


Bore Sizein 1.5 2.0 3.0 4.0 5.75 7.62 9.5 11.375 11.2 12.5 14.25 16 18

mm 38 51 76 102 146 194 241 289 289 318 362 407 457

Lin 14.5 18.5 21.5 27.75 32.75 39 44.5 49.5 54.5 54.5 60.5 65.5 80.4

mm 368 470 546 705 832 991 1130 1257 1384 1384 1537 1664 2043H1 in 5.0 5.0 7.5 8.5 8.5 11.7 19.5 21.3 21.3 23.2 26.4 28.0 29.5H2 in 8.5 8.5 10.2 11.7 11.7 14.4 22.8 27.4 27.4 30.0 32.7 35.4 37.4C in 25.6 25.6 - - - - - - - - - - -D in - - 23.6 23.6 23.6 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5

Weightlb 112 225 396 748 1254 2390 4075 5771 6564 8018 11740 17291 26267kg 51 102 180 340 570 1085 1850 2620 2980 3640 5330 7850 11925


Bore Sizein 1.5 2.0 3.0 4.0 6.0 8.0 10.0 12.0 12.0 13.25 15.25 15.25 17.25

mm 38 51 76 102 152 203 254 305 305 337 387 387 438

Lin 11.5 14.0 17.0 22.0 26.0 31.0 33.0 35.0 39.0 39.0 43.0 47.0 47.0

mm 292 356 432 559 660 787 838 889 991 991 1092 1194 1194H1 in 4.5 4.5 5.2 6.3 8.5 11.6 14.6 16.5 16.5 18.1 19.9 19.9 22.1H2 in 6.6 6.6 7.8 9.2 12.9 14.7 17.5 20.3 20.3 21.6 24.2 24.2 27.6C in 15.7 15.7 25.6 41.4 - - - - - - - - -D in - - - - 23.6 31.5 32.5 33.5 33.5 34.5 35.5 35.5 36.5

Weightlb 46.2 106 178 335 619 1066 1599 2555 2621 3489 4507 4736 5815kg 21 48 81 152 281 484 726 1160 1190 1584 2046 2150 2640

Class 600 NPS 24˝x20˝ 26˝x24˝ 30˝x24˝ 28˝x26˝ 30˝x28˝ 32˝x30˝ 36˝x30˝ 34˝x32˝ 36˝x34˝ 40˝x36˝ 42˝x40˝

Bore Sizein 19.25 23.25 23.25 25 27 29 29 30.75 32.75 36.5 38.5

mm 489 591 591 635 686 737 737 781 832 927 978

Lin 55.0 57 65 61 65 70 82 76 82 92 96

mm 1397 1448 1651 1549 1651 1778 2083 1930 2083 2337 2437H1 in 24.8 24.8 24.8 25.6 27.0 28.6 28.6 30.2 31.7 33.0 36.9H2 in 31.9 31.9 31.9 31.2 32.9 34.9 34.9 36.0 37.4 38.9 47.7C in - - - - - - - - - - -D in 37.5 37.5 37.5 37.5 37.5 37.5 37.5 55.1 55.1 55.1 55.1

Weightlb 9449 13855 15396 17137 17324 17533 18722 20738 24714 30286.3 37004kg 4290 6290 6990 7780 7865 7960 8500 9415 11220 13750 16800




2˝ x 11/2˝ 7.0 7.5 8.5 1.5 2.0 5.5 3.7 17.7 9.3 - 262˝ 7.0 7.5 8.5 2.0 2.0 6.1 4.1 17.7 9.3 - 40

3˝ x 2˝ 8.0 8.5 11.1 2.0 3.0 6.1 4.1 17.7 9.3 - 553˝ 8.0 8.5 11.1 3.0 3.0 7.7 5.1 23.6 11.0 - 71

4˝ x 3˝ 9.0 9.5 12.0 3.0 4.0 7.7 5.1 23.6 11.0 - 864˝ 9.0 9.5 12.0 4.0 4.0 9.1 6.5 23.6 12.0 - 104

6˝ x 4˝ 15.5 16.0 18.0 4.0 6.0 9.1 6.5 23.6 12.0 - 1436˝ 15.5 16.0 18.0 6.0 6.0 9.9 7.4 - 12.4 19.7 282

8˝ x 6˝ 18.0 18.5 20.5 6.0 8.0 9.9 7.4 - 12.4 19.7 4408˝ 18.0 18.5 20.5 8.0 8.0 10.8 8.7 - 13.3 19.7 588

10˝ x 8˝ 21.0 21.5 22.0 8.0 10.0 10.8 8.7 - 13.3 19.7 68210˝ 21.0 21.5 22.0 10.0 10.0 12.6 10.2 - 15.2 19.7 1051

12˝ x 10˝ 24.0 24.5 25.0 10.0 12.0 12.6 10.2 - 15.2 19.7 116112˝ 24.0 24.5 25.0 12.0 12.0 14.1 11.7 - 16.3 27.6 1632

14˝ x 12˝ 27.0 27.5 30.0 12.0 13.25 14.1 11.7 - 16.3 27.6 168016˝ x 12˝ 30.0 30.5 33.0 12.0 15.25 14.1 11.7 - 16.3 27.6 1780

14˝ 27.0 27.5 30.0 13.25 13.25 15.4 12.8 - 17.6 27.6 182016˝ x 14˝ 30.0 30.5 33.0 13.25 15.25 15.4 12.8 - 17.6 27.6 1914

16˝ 30.0 30.5 33.0 15.25 15.25 15.7 14.3 - 21.5 27.6 235418˝ x 16˝ 34.0 34.5 36.0 15.25 17.25 15.7 14.3 - 21.5 27.6 246420˝ x 16˝ 36.0 36.5 39.0 15.25 19.25 15.7 14.3 - 21.5 27.6 2662

18˝ 34.0 34.5 36.0 17.25 17.25 17.2 15.9 - 20.2 27.6 369620˝ x 18˝ 36.0 36.5 39.0 17.25 19.25 17.2 15.9 - 20.2 27.6 3800

20˝ 36.0 36.5 39.0 19.25 19.25 18.8 17.5 - 21.8 27.6 407024˝ x 20˝ 42.0 42.5 45.0 19.25 23.25 18.8 17.5 - 21.8 27.6 4620

22˝ 39.0 - 43.0 21.25 21.25 20.5 19.2 - 23.0 27.6 539024˝ 42.0 42.5 45.0 23.25 23.25 22.6 21.1 - 26.1 27.6 6996

30˝ x 24˝ 51.0 - 55.0 23.25 29.0 22.6 21.1 - 26.1 27.6 754626˝ 45.0 - 49.0 25.0 25.0 23.4 24.9 - 27.0 27.6 829428˝ 49.0 - 53.0 27.0 27.0 24.9 26.4 - 28.5 27.6 1019730˝ 51.0 - 55.0 29.0 29.0 27.0 27.8 - 30.6 27.6 11814

36˝ x 30˝ 60.0 - 68.0 29.0 34.5 27.0 27.8 - 30.6 27.6 1419032˝ 54.0 - 60.0 30.75 30.75 29.6 29.6 - 36.3 24.4 1531034˝ 58.0 - 64.0 32.75 32.75 30.7 30.7 - 37.6 24.4 1750036˝ 60.0 - 68.0 34.5 34.5 32.1 32.2 - 38.8 24.4 1970040˝ 69 - 69 38.43 38.43 35.43 35.35 - 41.8 55.1 2763242˝ 72 - 72 40.16 40.16 37.13 36.89 - 43.0 55.1 31416


SE-3SE-1


Component Parts List

1 BODY

2 ADAPTER

3 BALL

4 SEAT RING

5 SEAT O-RING

7 GLAND

8 GLAND CAP SCREW

9 STOP PLATE

10 STEM

11 STEM O-RING

12 PLATE CAP SCREW

13 SEALANT INJECTION FITTING,STEM

14 GLAND O-RING

15 BODY STUD

16 BODY NUT

17 BODY O-RING

18 TRUNNION O-RING

19 DRAIN FITTING

20 TRUNNION

30 SEAT INSERT

31 SPRING

32 GLAND BUSHING

33 THRUST WASHER

35 STEM KEY

36 STEM GRAPHITE PACKING

37 GLAND GRAPHITE GASKET

38 BODY GRAPHITE GASKET

39 TRUNNION GRAPHITE GASKET

40 TRUNNION BUSHING

41 TRUNNION CAP SCREW

43 HANDLE ADAPTER

44 HANDLE

45 LOCK SCREW

46 NAME PLATE

47 RIVET


For Size ≤ 4˝Class 150-2500 LB

Three-Piece Forged Steel Body Side Entry Type SE-1



Part Carbon St. Body Stainless St. Body Low Temp. St. Body

No. Description CS NACE TRIM S.S TRIM S.S TRIM CS NACE TRIM S.S TRIM

SOUR SERVICE SOUR SERVICE SOUR SERVICE SOUR SERVICE SOUR SERVICE

31 Spring INCONEL X750

32 Gland Bushin g Metal Backed + PTFE

33 Thrust Washer Metal & Flexible Graphite

34 Stem Bearing Metal Backed + PTFE

35 Stem Key AISI 1045

36 Stem Graphite Packing Flexible Graphite

37 Gland Graphite Gasket Metal & Flexible Graphite

38 Body Graphite Gasket Metal & Flexible Graphite

39 Trunnion Graphite Gasket Metal & Flexible Graphite

40 Trunnion Bushing Metal Backed + PTFE

41 Trunnion Cap Screw Carbon Steel

42 Spring Pin Carbon Steel

43 Handle Adapter Carbon Steel

44 Handle Carbon Steel Pipe

45 Lock Screw Carbon Steel

46 Name Plate Stainless Steel

47 Drive Screw Carbon Steel

48 Gland Pin Carbon Steel

49 Lock Washer Graphite

50 Grease Fitting O-Ring VITON

51 Stem Key Cap Screw Carbon Steel

52 Lifting Lug Carbon Steel

53 Worm Gear Operator Commerical

54 Worm Gear Adapter Plate Carbon Steel

55 Handwheel Malleable Iron

56 Closure Pin Carbon Steel

57 Ball Bearing Metal Backed + PTFE

58 Support Leg Carbon Steel

59 Ball Thrust Washe r Metal & Flexible Graphite

Note: Other Material Standard Can be Supplied Upon Request. * Part No 29 “Spacer” is Optional.


Trunnion Mounted Ball ValvesThree-Piece Forged Steel Body Side Entry Type SE-1





No.Description CS NACE TRIM S.S TRIM S.S TRIM CS NACE TRIM S.S TRIM


1 Body A105 / +ENP A182-F316 A350 LF2 / +ENP

2 Adapter A105 / +ENP A182-F316 A350 LF2 / +ENP

3 Ball A105+ENP A182 F6 / F316 A182-F316 A350-LF2+ENP A182-F316

4 Seat Ring A105+ENP A182F6 / F316 A182-F316 A350-LF2+ENP A182-F316

5 Seat O-Ring VITON-B VITON-GLT / HNBR

6 Sealant Injection Fitting, Seat 4140 / 316 SS 316 SS 316 SS

7 Gland A105 + ENP A182-F316 A350-LF2+ENP

8 Gland Cap Screw A193-B7M A193-B8 / B8M A320 L7M

9 Stop Plate Carbon Steel Carbon Steel+ENP Low Temp Carbon Steel

10 Stem 4140+ENP / A105 + ENP 17-4PH / F316 4140+ENP / LF2+ENP A182-F316

11 Stem O-Ring VITON-B VITON-GLT / HNBR

12 Plate Cap Screw A193 B7M A193-B8 / B8M A320-L7M

13 Sealant Injection Fitting, Stem 4140 / 316 SS 316 SS 4140 / 316 SS

14 Gland O-Ring VITON-B VITON-GLT / HNBR

15 Body Stud A193 B7M A193-B8 / B8M A320-L7M

16 Body Nut A194 2HM A194-8 / 8M A194-7M

17 Body O-Ring VITON-B VITON-GLT / HNBR

18 Trunnion O-Ring VITON-B VITON-GLT / HNBR

19 Drain Fitting 4140 / 316 SS 316 SS 4140 / 316 SS

20 Trunnion 4140+ENP / A105 + ENP A182-F316 A350 LF2+ENP

21 Gear Adapter Cap Screw A193-B7M A193-B8 / B8M A320-L7M

22 Gear Stud A193-B7M A193-B8 / B8M A320-L7M

23 Gear Adapter Plate Nut A194-2HM A194 Gr8 / 8M A194 7M

24 Internal Check Valve 4140 / 316 SS 316 SS 316 SS

25 Vent Fitting 4140 / 316 SS 316 SS 316 SS

26 Lifting Lug Stud A193-B7M A193-B8 / B8M A320-L7M

27 Bearing Retainer A105+ENP A182-F316 A350-LF2+ENP

28 Location Stud A193-B7M A193-B8 A320 L7M

* 29 Spacer A105+ENP A182-F316 A350 LF2+ENP A182-F316

30 Seat Insert PTFE / R-PTFE / NYLON / DEVLON / PEEK




1 BODY

2 ADAPTER

3 BALL

4 SEAT RING

5 SEAT O-RING

6 SEALANT INJECTION FITTING,SEAT

7 GLAND

8 GLAND CAP SCREW

10 STEM

11 STEM O-RING

12 PLATE CAP SCREW


14 GLAND O-RING

15 BODY STUD

16 BODY NUT

17 BODY O-RING

19 DRAIN FITTING

21 SPRING

22 GEAR STUD

23 GEAR ADAPTER PLATE NUT


25 VENT FITTING

26 LIFTING LUG STUD

27 BEARING RETAINER

28 LOCATION STUD

* 29 SPACER

30 SEAT INSERT

31 SPRING

33 THRUST WASHER

34 STEM BEARING

For Size ≥ 6˝Class 150-2500 LB

35 STEM KEY




46 NAME PLATE

47 DRIVE SCREW

48 GLAND PIN

49 LOCK WASHER

50 GREASE FITTING O-RING

51 STEM KEY CAP SCREW

52 LIFTING LUG

53 WORM GEAR OPERATOR

54 WORM GEAR ADAPTER PLATE

55 HANDWHEEL

56 CLOSURE PIN

57 BALL BEARING

58 SUPPORT LEG

59 BALL THRUST WASHER

* Optional


For Size ≥ 6˝Class 150-2500 LB







No.Description CS NACE TRIM S.S TRIM S.S TRIM CS NACE TRIM S.S TRIM


1 Body A105 / +ENP A182-F316 A350 LF2 / +ENP

2 Adapter A105 / +ENP A182-F316 A350 LF2 / +ENP

3 Ball A105+ENP A182 F6 / F316 A182-F316 A350-LF2+ENP A182-F316

4 Seat Ring A105+ENP A182F6 / F316 A182-F316 A350-LF2+ENP A182-F316

5 Seat O-Ring VITON-B VITON-GLT / HNBR

6 Sealant Injection Fitting, Seat 4140 / 316 SS 316 SS 316 SS

7 Gland A105 + ENP A182-F316 A350-LF2+ENP

8 Gland Cap Screw A193-B7M A193-B8 / B8M A320 L7M

9 Stop Plate Carbon Steel Carbon Steel+ENP Low Temp Carbon Steel

10 Stem 4140+ENP / A105 + ENP 17-4PH / F316 4140+ENP / LF2+ENP A182-F316

11 Stem O-Ring VITON-B VITON-GLT / HNBR

12 Plate Cap Screw A193 B7M A193-B8 / B8M A320-L7M

13 Sealant Injection Fitting, Stem 4140 / 316 SS 316 SS 4140 / 316 SS

14 Gland O-Ring VITON-B VITON-GLT / HNBR

15 Body Stud A193 B7M A193-B8 / B8M A320-L7M

16 Body Nut A194 2HM A194-8 / 8M A194-7M

17 Body O-Ring VITON-B VITON-GLT / HNBR

18 Trunnion O-Ring VITON-B VITON-GLT / HNBR

19 Drain Fitting 4140 / 316 SS 316 SS 4140 / 316 SS

20 Trunnion 4140+ENP / A105 + ENP A182-F316 A350 LF2+ENP

21 Gear Adapter Cap Screw A193-B7M A193-B8 / B8M A320-L7M

22 Gear Stud A193-B7M A193-B8 / B8M A320-L7M

23 Gear Adapter Plate Nut A194-2HM A194 Gr8 / 8M A194 7M

24 Internal Check Valve 4140 / 316 SS 316 SS 316 SS

25 Vent Fitting 4140 / 316 SS 316 SS 316 SS

26 Lifting Lug Stud A193-B7M A193-B8 / B8M A320-L7M

27 Bearing Retainer A105+ENP A182-F316 A350-LF2+ENP

28 Location Stud A193-B7M A193-B8 A320 L7M

* 29 Spacer A105+ENP A182-F316 A350 LF2+ENP A182-F316

30 Seat Insert PTFE / R-PTFE / NYLON / DEVLON / PEEK


Component Parts List

1 BODY

2 ADAPTER

3 BALL

4 SEAT RING

5 SEAT O-RING

7 GLAND

8 GLAND CAP SCREW

9 STOP PLATE

10 STEM

11 STEM O-RING

12 PLATE CAP SCREW


14 GLAND O-RING

15 BODY STUD

16 BODY NUT

17 BODY O-RING

18 TRUNNION O-RING

19 DRAIN FITTING

20 TRUNNION

30 SEAT INSERT

31 SPRING

32 GLAND BUSHING

33 THRUST WASHER

35 STEM KEY




39 TRUNNION GRAPHITE GASKET

40 TRUNNION BUSHING

41 TRUNNION CAP SCREW

43 HANDLE ADAPTER

44 HANDLE

45 LOCK SCREW

46 NAME PLATE

47 RIVET



Three-Piece Forged Steel Body Side Entry Type SE-1




No. Description CS NACE TRIM S.S TRIM S.S TRIM CS NACE TRIM S.S TRIM


31 Spring INCONEL X750

32 Gland Bushin g Metal Backed + PTFE

33 Thrust Washer Metal & Flexible Graphite

34 Stem Bearing Metal Backed + PTFE

35 Stem Key AISI 1045

36 Stem Graphite Packing Flexible Graphite

37 Gland Graphite Gasket Metal & Flexible Graphite

38 Body Graphite Gasket Metal & Flexible Graphite

39 Trunnion Graphite Gasket Metal & Flexible Graphite

40 Trunnion Bushing Metal Backed + PTFE

41 Trunnion Cap Screw Carbon Steel

42 Spring Pin Carbon Steel

43 Handle Adapter Carbon Steel

44 Handle Carbon Steel Pipe

45 Lock Screw Carbon Steel

46 Name Plate Stainless Steel

47 Drive Screw Carbon Steel

48 Gland Pin Carbon Steel

49 Lock Washer Graphite

50 Grease Fitting O-Ring VITON

51 Stem Key Cap Screw Carbon Steel

52 Lifting Lug Carbon Steel

53 Worm Gear Operator Commerical

54 Worm Gear Adapter Plate Carbon Steel

55 Handwheel Malleable Iron

56 Closure Pin Carbon Steel

57 Ball Bearing Metal Backed + PTFE

58 Support Leg Carbon Steel

59 Ball Thrust Washe r Metal & Flexible Graphite

Note: Other Material Standard Can be Supplied Upon Request. * Part No 29 “Spacer” is Optional.




Class 900 NPS 2˝x11/2˝ 3˝x2˝ 4˝x3˝ 6˝x4˝ 8˝x6˝ 10˝x8˝ 12˝x10˝ 14˝x12˝ 16˝x12˝ 16˝x14˝ 18˝x16˝ 20˝x16˝ 20˝x18˝ 24˝x20˝ 26˝x24˝ 30˝x24˝ 28˝x26˝ 30˝x28˝

Bore Sizein 1.5 2.0 3.0 4.0 6.0 8.0 10 12 12 12.75 14.75 14.75 16.75 18.625 22.5 22.5 24.375 26.25

mm 38 51 76 102 152 203 254 305 305 324 375 375 425 473 572 572 619 667

Lin 14.5 15.0 18.0 24.0 29.0 33 38 40.5 44.5 44.5 48 52 52 61 65 74 69 74

mm 368 381 457 610 737 838 965 1029 1130 1130 1219 1321 1321 1549 1651 1880 1753 1880

H1 in 5.0 5.0 7.5 8.5 8.5 10.6 16.5 18.5 18.5 20.1 23.6 23.6 27.6 28.3 31.9 36.9 27.1 28.9

H2 in 8.5 8.5 10.2 11.7 11.7 14.2 19.8 22.5 22.5 26.6 30.0 30.0 34.1 35.2 37.6 37.6 32.9 34.6

C in 25.6 25.6 25.6 - - - - - - - - - - - - - - -

D in - - - 23.6 23.6 23.6 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 37.4 37.4 37.4 37.4

Weightlb 83.6 159 258 639 958 1289 2015 2632 2907 3965 5551 6278 7489 12291 16850 17863 20341 24934

kg 38 72 117 290 435 585 915 1195 1320 1800 2520 2850 3400 5580 7650 8110 9235 11320


Bore Sizein 1.5 2.0 3.0 4.0 5.75 7.62 9.5 11.375 11.2 12.5 14.25 16 18

mm 38 51 76 102 146 194 241 289 289 318 362 407 457

Lin 14.5 18.5 21.5 27.75 32.75 39 44.5 49.5 54.5 54.5 60.5 65.5 80.4

mm 368 470 546 705 832 991 1130 1257 1384 1384 1537 1664 2043H1 in 5.0 5.0 7.5 8.5 8.5 11.7 19.5 21.3 21.3 23.2 26.4 28.0 29.5H2 in 8.5 8.5 10.2 11.7 11.7 14.4 22.8 27.4 27.4 30.0 32.7 35.4 37.4C in 25.6 25.6 - - - - - - - - - - -D in - - 23.6 23.6 23.6 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5

Weightlb 112 225 396 748 1254 2390 4075 5771 6564 8018 11740 17291 26267kg 51 102 180 340 570 1085 1850 2620 2980 3640 5330 7850 11925


Bore Sizein 1.5 2.0 3.0 4.0 6.0 8.0 10.0 12.0 12.0 13.25 15.25 15.25 17.25

mm 38 51 76 102 152 203 254 305 305 337 387 387 438

Lin 11.5 14.0 17.0 22.0 26.0 31.0 33.0 35.0 39.0 39.0 43.0 47.0 47.0

mm 292 356 432 559 660 787 838 889 991 991 1092 1194 1194H1 in 4.5 4.5 5.2 6.3 8.5 11.6 14.6 16.5 16.5 18.1 19.9 19.9 22.1H2 in 6.6 6.6 7.8 9.2 12.9 14.7 17.5 20.3 20.3 21.6 24.2 24.2 27.6C in 15.7 15.7 25.6 41.4 - - - - - - - - -D in - - - - 23.6 31.5 32.5 33.5 33.5 34.5 35.5 35.5 36.5

Weightlb 46.2 106 178 335 619 1066 1599 2555 2621 3489 4507 4736 5815kg 21 48 81 152 281 484 726 1160 1190 1584 2046 2150 2640

Class 600 NPS 24˝x20˝ 26˝x24˝ 30˝x24˝ 28˝x26˝ 30˝x28˝ 32˝x30˝ 36˝x30˝ 34˝x32˝ 36˝x34˝ 40˝x36˝ 42˝x40˝

Bore Sizein 19.25 23.25 23.25 25 27 29 29 30.75 32.75 36.5 38.5

mm 489 591 591 635 686 737 737 781 832 927 978

Lin 55.0 57 65 61 65 70 82 76 82 92 96

mm 1397 1448 1651 1549 1651 1778 2083 1930 2083 2337 2437H1 in 24.8 24.8 24.8 25.6 27.0 28.6 28.6 30.2 31.7 33.0 36.9H2 in 31.9 31.9 31.9 31.2 32.9 34.9 34.9 36.0 37.4 38.9 47.7C in - - - - - - - - - - -D in 37.5 37.5 37.5 37.5 37.5 37.5 37.5 55.1 55.1 55.1 55.1

Weightlb 9449 13855 15396 17137 17324 17533 18722 20738 24714 30286.3 37004kg 4290 6290 6990 7780 7865 7960 8500 9415 11220 13750 16800




2˝ x 11/2˝ 7.0 7.5 8.5 1.5 2.0 5.5 3.7 17.7 9.3 - 262˝ 7.0 7.5 8.5 2.0 2.0 6.1 4.1 17.7 9.3 - 40

3˝ x 2˝ 8.0 8.5 11.1 2.0 3.0 6.1 4.1 17.7 9.3 - 553˝ 8.0 8.5 11.1 3.0 3.0 7.7 5.1 23.6 11.0 - 71

4˝ x 3˝ 9.0 9.5 12.0 3.0 4.0 7.7 5.1 23.6 11.0 - 864˝ 9.0 9.5 12.0 4.0 4.0 9.1 6.5 23.6 12.0 - 104

6˝ x 4˝ 15.5 16.0 18.0 4.0 6.0 9.1 6.5 23.6 12.0 - 1436˝ 15.5 16.0 18.0 6.0 6.0 9.9 7.4 - 12.4 19.7 282

8˝ x 6˝ 18.0 18.5 20.5 6.0 8.0 9.9 7.4 - 12.4 19.7 4408˝ 18.0 18.5 20.5 8.0 8.0 10.8 8.7 - 13.3 19.7 588

10˝ x 8˝ 21.0 21.5 22.0 8.0 10.0 10.8 8.7 - 13.3 19.7 68210˝ 21.0 21.5 22.0 10.0 10.0 12.6 10.2 - 15.2 19.7 1051

12˝ x 10˝ 24.0 24.5 25.0 10.0 12.0 12.6 10.2 - 15.2 19.7 116112˝ 24.0 24.5 25.0 12.0 12.0 14.1 11.7 - 16.3 27.6 1632

14˝ x 12˝ 27.0 27.5 30.0 12.0 13.25 14.1 11.7 - 16.3 27.6 168016˝ x 12˝ 30.0 30.5 33.0 12.0 15.25 14.1 11.7 - 16.3 27.6 1780

14˝ 27.0 27.5 30.0 13.25 13.25 15.4 12.8 - 17.6 27.6 182016˝ x 14˝ 30.0 30.5 33.0 13.25 15.25 15.4 12.8 - 17.6 27.6 1914

16˝ 30.0 30.5 33.0 15.25 15.25 15.7 14.3 - 21.5 27.6 235418˝ x 16˝ 34.0 34.5 36.0 15.25 17.25 15.7 14.3 - 21.5 27.6 246420˝ x 16˝ 36.0 36.5 39.0 15.25 19.25 15.7 14.3 - 21.5 27.6 2662

18˝ 34.0 34.5 36.0 17.25 17.25 17.2 15.9 - 20.2 27.6 369620˝ x 18˝ 36.0 36.5 39.0 17.25 19.25 17.2 15.9 - 20.2 27.6 3800

20˝ 36.0 36.5 39.0 19.25 19.25 18.8 17.5 - 21.8 27.6 407024˝ x 20˝ 42.0 42.5 45.0 19.25 23.25 18.8 17.5 - 21.8 27.6 4620

22˝ 39.0 - 43.0 21.25 21.25 20.5 19.2 - 23.0 27.6 539024˝ 42.0 42.5 45.0 23.25 23.25 22.6 21.1 - 26.1 27.6 6996

30˝ x 24˝ 51.0 - 55.0 23.25 29.0 22.6 21.1 - 26.1 27.6 754626˝ 45.0 - 49.0 25.0 25.0 23.4 24.9 - 27.0 27.6 829428˝ 49.0 - 53.0 27.0 27.0 24.9 26.4 - 28.5 27.6 1019730˝ 51.0 - 55.0 29.0 29.0 27.0 27.8 - 30.6 27.6 11814

36˝ x 30˝ 60.0 - 68.0 29.0 34.5 27.0 27.8 - 30.6 27.6 1419032˝ 54.0 - 60.0 30.75 30.75 29.6 29.6 - 36.3 24.4 1531034˝ 58.0 - 64.0 32.75 32.75 30.7 30.7 - 37.6 24.4 1750036˝ 60.0 - 68.0 34.5 34.5 32.1 32.2 - 38.8 24.4 1970040˝ 69 - 69 38.43 38.43 35.43 35.35 - 41.8 55.1 2763242˝ 72 - 72 40.16 40.16 37.13 36.89 - 43.0 55.1 31416


SE-3SE-1




Bore Sizein 1.5 2.0 3.0 4.0 6.0 8.0 10.0 12.0 12.0 13.25 15.25 15.25 17.25

mm 38 51 76 102 152 203 254 305 305 337 387 387 438

Lin 7.0 8.0 9.0 15.5 18.0 21.0 24.0 27.0 39.5 30.0 34.0 36.0 36.0

mm 178 203 229 394 457 533 610 686 762 762 864 914 914H1 in 4.8 4.8 6.8 7.8 11.7 15.1 12.8 14.4 14.4 15.7 17.3 17.3 19.7H2 in 3.2 3.2 4.1 5.1 8.4 10.1 15.9 17.9 17.9 19.3 21.6 21.6 24.4C in 11.0 11.0 15.75 25.6 41.3 55.5 - - - - - - -D in - - - - - - 23.6 31.5 31.5 32.5 33.5 33.5 34.5

Weightlb 24 37.4 73 145 286 524 751 1139 1234 1430 2011 2225 2511kg 11 17 33 66 130 238 341 517 560 649 913 1010 1140


Bore Sizein 19.25 23.25 23.25 25 27 29 29 30.75 32.75 36.5 38.5 40.25

mm 489 591 591 635 686 737 737 781 832 927 978 1022

Lin 42.0 45 51 49 51 54 60 58 60 69 73 84

mm 1067 1143 1295 1245 1295 1372 1524 1473 1524 1753 1855 2134H1 in 21.8 21.8 218 24.9 26.4 27.8 27.8 29.6 31.0 32.2 35.7 37.0H2 in 26.8 26.8 26.8 27.0 28.5 30.6 30.6 36.3 37.6 38.8 41.8 43.0C in - - - - - - - - - - - -D in 35.5 35.5 35.5 35.5 35.5 35.5 35.5 35.5 35.5 35.5 55.1 55.1

Weightlb 3998 5617 6784 9030.8 11167 13150 9934 15793 18811 23039.6 28139 36366kg 1815 2550 3080 4100 5070 5970 4510 7170 8540 10460 12775 16510


Bore Sizein 1.5 2.0 3.0 4.0 6.0 8.0 10.0 12.0 12.0 13.25 15.25 15.25 17.25

mm 38 51 76 102 152 203 254 305 305 337 387 387 438

Lin 8.5 11.1 12.0 16.0 20.0 22.5 25.5 30.0 33.0 33.0 36.0 39.0 39.0

mm 216 283 305 403 502 568 648 762 838 838 914 991 991H1 in 4.5 4.8 6.8 7.8 11.7 11.8 12.8 14.4 14.4 15.75 17.3 17.3 19.7H2 in 2.9 3.2 4.1 5.1 8.4 15.3 15.9 17.9 17.9 19.3 21.6 21.6 24.4C in 11.0 11.0 15.7 25.6 41.3 55.5 - - - - - - -D in - - - - - - 23.6 31.5 31.5 32.5 33.5 33.5 34.5

Weightlb 26.4 57.2 105.6 198 408 627 921 1405 1564 1890 2665 2906 3295kg 12 26 48 90 185 285 418 638 710 858 1210 1320 1496


Bore Sizein 19.25 23.25 23.25 25 27 29 29 30.75 32.75 36.5 38.5 40.25

mm 489 591 591 635 686 737 737 781 832 927 978 1022

Lin 45.0 49 55 53 55 60 68 64 68 77 82 85

mm 1143 1245 1379 1346 1379 1524 1727 1626 1727 1956 2083 2170H1 in 21.8 21.8 21.8 25.7 26.9 28.3 28.3 29.7 31.1 32.2 35.8 37.4H2 in 26.8 26.5 26.5 31.7 32.6 34.1 34.1 35.7 36.2 37.6 41.9 43.3C in - - - - - - - - - - - -D in 35.5 35.5 35.5 35.5 35.5 55.1 55.1 55.1 55.1 55.1 55.1 55.1

Weightlb 4725 7610.1 8480 10441 12247 13998 13084 16564 19736 24174 29526 38172kg 2145 3455 3850 4740 5560 6355 5940 7520 8960 10975 13405 17330





2˝ x 11/2˝ 8.5 9.1 8.5 1.5 2.0 5.5 3.7 17.7 9.3 - 462˝ 8.5 9.1 8.5 2.0 2.0 6.1 4.1 17.7 9.3 - 61.6

3˝ x 2˝ 11.1 11.7 11.1 2.0 3.0 6.1 4.1 17.7 9.3 - 793˝ 11.1 11.7 11.1 3.0 3.0 7.7 5.1 23.6 10.6 - 102

4˝ x 3˝ 12.0 12.6 12.0 3.0 4.0 7.7 5.1 23.6 10.6 - 1214˝ 12.0 12.6 12.0 4.0 4.0 9.1 6.5 39.4 12.0 - 160

6˝ x 4˝ 15.9 16.5 18.0 4.0 6.0 9.1 6.5 39.4 12.0 2126˝ 15.9 16.5 18.0 6.0 6.0 9.9 7.4 - 12.4 19.7 344

8˝ x 6˝ 19.8 20.4 20.5 6.0 8.0 9.9 7.4 - 12.4 19.7 4688˝ 19.8 20.4 20.5 8.0 8.0 10.8 8.7 - 13.0 27.6 670

10˝ x 8˝ 22.4 23.0 22.0 8.0 10.0 10.8 8.7 - 13.0 27.6 75810˝ 22.4 23.0 22.0 10.0 10.0 13.1 10.6 - 15.2 27.6 1145

12˝ x 10˝ 25.5 26.1 25.0 10.0 12.0 13.1 10.6 - 15.2 27.6 136412˝ 25.5 26.1 25.0 12.0 12.0 14.9 12.4 - 17.0 27.6 1740

14˝ x 12˝ 30.0 30.6 30.0 12.0 13.25 14.9 12.4 - 17.0 27.6 189216˝ x 12˝ 33.0 33.6 33.0 12.0 15.25 14.9 12.4 - 17.0 27.6 2222

14˝ 30.0 30.6 30.0 13.25 13.25 15.0 13.5 - 17.3 27.6 239816˝ x 14˝ 33.0 33.6 33.0 13.25 15.25 15.0 13.5 - 17.3 27.6 2618

16˝ 33.0 33.6 33.0 15.25 15.25 16.9 15.6 - 19.8 27.6 325618˝ x 16˝ 36.0 36.6 36.0 15.25 17.25 16.9 15.6 - 19.8 27.6 363020˝ x 16˝ 39.0 39.8 39.0 15.25 19.25 16.9 15.6 - 19.8 27.6 3784

18˝ 36.0 36.6 36.0 17.25 17.25 17.3 18.9 - 20.3 27.6 419820˝ x 18˝ 39.0 39.8 39.0 17.25 19.25 17.3 18.9 - 20.3 27.6 4318

20˝ 39.0 39.8 39.0 19.25 19.25 19.6 20.6 - 23.1 27.6 503824˝ x 20˝ 45.0 45.9 45.0 19.25 23.25 19.6 20.6 - 23.1 27.6 6050

22˝ 43.0 43.9 43.0 21.25 21.25 20.6 22.1 - 24.2 27.6 633624˝ 45.0 45.9 45.0 23.25 23.25 23.0 23.7 - 26.5 27.6 7942

30˝ x 24˝ 55.0 56.0 55.0 23.25 29.0 23.0 23.7 - 26.5 27.6 1018626˝ 49.0 50.0 49.0 25.0 25.0 24.9 25.7 - 31.7 24.4 1058228˝ 53.0 54.0 53.0 27.0 27.0 26.5 26.9 - 32.6 55.1 1302030˝ 55.0 56.0 55.0 29.0 29.0 28.0 28.3 - 34.1 55.1 14830

36˝ x 30˝ 68.0 69.1 68.0 29.0 34.5 28.0 28.3 - 34.1 55.1 1833032˝ 60.0 61.1 60.0 30.75 30.75 29.6 29.7 - 35.7 55.1 1778034˝ 64.0 65.1 64.0 32.75 32.75 30.1 31.1 - 36.2 55.1 2037036˝ 68.0 69.1 68.0 34.5 34.5 31.5 32.2 - 37.6 55.1 2262040˝ 77 - 77 38.43 38.43 35.4 36.2 - 41.8 55.1 3030542˝ 82 - 82 40.16 40.16 38.1 37.4 - 43.3 55.1 35431


SE-3SE-1




Class 600 Size 2˝ 3˝ 4˝ 6˝ 8˝ 10˝ 12˝ 14˝ 16˝ 18˝ 20˝ 24˝

Bore Sizein 2.0 3.0 4.0 6.0 8.0 10.0 12.0 13.25 15.25 17.25 19.25 23.25

mm 51 76 102 152 203 254 305 337 387 438 489 591

Lin 11.5 14.0 17.0 22.0 26.0 31.0 33.0 35.0 39.0 43.0 47.0 55.0

mm 292 356 432 559 660 787 838 889 991 1092 1194 1397H1 in 4.5 5.2 6.0 8.5 11.6 14.6 16.5 18.1 19.9 22.1 24.8 24.8H2 in 6.6 7.8 11.0 12.9 14.7 17.5 20.3 21.6 24.2 27.6 31.9 31.9C in 15.7 25.6 - - - - - - - - - -D in - - 17.7 23.6 31.5 32.5 33.5 34.5 35.5 36.5 37.5 37.5

Weightlb 73 130 223 533 848 1454 1987 2730 3756 5088 6784 12841kg 33 59 101 242 385 660 902 1243 1705 2310 3080 5830

Class 600 Size 26˝ 28˝ 30˝ 32˝ 34˝ 36˝ 40˝ 42˝

Bore Sizein 25 27 29 30.75 32.75 36.5 38.5 40.25

mm 635 686 737 781 832 927 978 1022

Lin 57 61 65 70 76 82 92 96

mm 1448 1549 1651 1778 1930 2083 2337 2437H1 in 25.6 27.0 28.6 30.2 31.7 33.0 36.9 38.5H2 in 31.2 32.9 34.9 36.0 37.4 38.9 47.7 53.3C in - - - - - - - -D in 31.5 31.5 31.5 55.1 55.1 55.1 55.1 55.1

Weightlb 13436 15749 17930 18670 22830 28634 33990 40070kg 6100 7150 8140 8470 10360 13000 15420 18180


Class 900 Size 2˝ 3˝ 4˝ 6˝ 8˝ 10˝ 12˝ 14˝ 16˝ 18˝ 20˝ 24˝ 26˝ 28˝ 30˝

Bore Sizein 2.0 3.0 4.0 6.0 8.0 10 12 12.75 14.75 16.75 18.625 22.5 24.375 26.25 28.125

mm 51 76 102 152 203 254 305 324 375 425 473 572 619 667 714

Lin 14.5 15.0 18.0 24.0 29.0 33 38 40.5 44.5 48 52 61 65 69 74

mm 368 381 457 610 737 838 965 1029 1130 1219 1321 1549 1651 1753 1880H1 in 5.0 7.5 8.5 10.6 10.6 16.5 18.5 20.1 23.6 27.6 28.3 31.9 27.1 28.9 31.1H2 in 8.5 10.2 11.7 14.2 14.2 19.8 22.5 26.6 30.0 34.1 35.2 37.6 32.9 34.6 41.2C in 25.6 25.6 - - - - - - - - - - - - -D in - - 23.6 23.6 23.6 31.5 31.5 31.5 31.5 31.5 31.5 31.5 37.4 37.4 37.4

Weightlb 139 176 275 749 1100 2357 3546 3436 4934 6608 9604 15485 18216 22467 27401kg 63 80 125 340 500 1070 1610 1560 2240 3000 4360 7030 8270 10200 12440

Class 1500 Size 2˝ 3˝ 4˝ 6˝ 8˝ 10˝ 12˝ 14˝ 16˝ 18˝ 20˝ 24˝

Bore Sizein 2.0 3.0 4.0 5.75 7.62 9.5 11.375 12.5 14.25 16 18 21

mm 51 76 102 146 194 241 289 318 362 407 457 534

Lin 14.5 18.5 21.5 27.8 32.75 39 44.5 49.5 54.5 60.5 65.5 80.4

mm 368 470 546 705 832 991 1130 1257 1384 1537 1664 2043H1 in 5.0 7.5 8.5 11.7 11.7 19.5 21.3 23.2 26.4 28.0 29.5 33.5H2 in 8.5 10.2 11.7 14.4 14.4 22.8 27.4 30.0 32.7 35.4 37.4 42.5C in 25.6 - - - - - - - - - - -D in - 23.6 23.6 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5

Weightlb 148 330 540 863 1420 2114 3304 4009 5066 6409 10771 16850kg 67 150 245 392 645 960 1500 1820 2300 2910 4890 7650




2˝ x 11/2˝ 11.5 11.6 11.5 1.5 2.0 5.7 3.7 17.7 9.3 - 572˝ 11.5 11.6 11.5 2.0 2.0 6.1 4.1 23.6 9.3 - 71

3˝ x 2˝ 14.0 14.1 14.0 2.0 3.0 6.1 4.1 23.6 9.3 - 1063˝ 14.0 14.1 14.0 3.0 3.0 7.7 5.1 39.4 11.0 - 132

4˝ x 3˝ 17.0 17.1 17.0 3.0 4.0 7.7 5.1 39.4 11.0 - 1834˝ 17.0 17.1 17.0 4.0 4.0 9.1 6.5 39.4 12.0 - 271

6˝ x 4˝ 22.0 22.1 22.0 4.0 6.0 9.1 6.5 39.4 12.0 - 3726˝ 22.0 22.1 22.0 6.0 6.0 9.9 7.4 - 12.0 27.6 615

8˝ x 6˝ 26.0 26.1 26.0 6.0 8.0 9.9 7.4 - 12.0 27.6 7368˝ 26.0 26.1 26.0 8.0 8.0 12.2 9.6 - 14.4 27.6 980

10˝ x 8˝ 31.0 31.1 31.0 8.0 10.0 12.2 9.6 - 14.4 27.6 122010˝ 31.0 31.1 31.0 10.0 10.0 12.8 11.4 - 15.2 27.6 1696

12˝ x 10˝ 33.0 33.1 33.0 10.0 12.0 12.8 11.4 - 15.2 27.6 198212˝ 33.0 33.1 33.0 12.0 12.0 14.9 13.5 - 17.2 27.6 2341

14˝ x 12˝ 35.0 35.1 35.0 12.0 13.25 14.9 13.5 - 17.2 27.6 273816˝ x 12˝ 39.0 39.1 39.0 12.0 15.25 14.9 13.5 - 17.2 27.6 2919

14˝ 35.0 35.1 35.0 13.25 13.25 14.1 15.9 - 17.1 27.6 303716˝ x 14˝ 39.0 39.1 39.0 13.25 15.25 14.1 15.9 - 17.1 27.6 3350

16˝ 39.0 39.1 39.0 15.25 15.25 15.6 17.4 - 18.6 27.6 381718˝ x 16˝ 43.0 43.1 43.0 15.25 17.25 15.6 17.4 - 18.6 27.6 388320˝ x 16˝ 47.0 47.2 47.0 15.25 19.25 15.6 17.4 - 18.6 27.6 4774

18˝ 43.0 43.1 43.0 17.25 17.25 19.0 19.2 - 22.6 27.6 604420˝ x 18˝ 47.0 47.2 47.0 17.25 19.25 19.0 19.2 - 22.6 27.6 6500

20˝ 47.0 47.2 47.0 19.25 19.25 19.8 20.7 - 23.5 27.6 773024˝ x 20˝ 55.0 55.4 55.0 19.25 23.25 19.8 20.7 - 23.5 27.6 8600

22˝ 51.0 51.4 51.0 21.25 21.25 22.2 22.6 - 29.0 55.1 992724˝ 55.0 55.4 55.0 23.25 23.25 23.8 24.1 - 29.9 55.1 12841

30˝ x 24˝ 65.0 65.5 65.0 23.25 29.0 23.8 24.1 - 29.9 55.1 1300226˝ 57.0 57.5 57.0 25.0 25.0 25.1 25.6 - 31.2 55.1 1301228˝ 61.0 61.5 61.0 27.0 27.0 27.0 27.0 - 32.9 55.1 1571030˝ 65.0 65.5 65.0 29.0 29.0 28.6 28.6 - 34.9 55.1 18830

36˝ x 30˝ 82.0 82.6 82.0 29.0 34.5 28.6 28.6 - 34.9 55.1 2323032˝ 70.0 70.6 70.0 30.75 30.75 29.9 30.2 - 36.0 55.1 2187034˝ 76.0 76.6 76.0 32.75 32.75 31.3 31.7 - 37.4 55.1 2545536˝ 82.0 82.6 82.0 34.5 34.5 32.8 33.0 - 38.9 55.1 2976540˝ 85.4 - 85.4 38.43 38.43 36.1 38.6 - 47.7 55.1 4033742˝ 85.6 - 85.6 40.16 40.16 39.2 43.7 - 53.3 55.1 46983

SE-3SE-1





Class 150 Size 2˝ 3˝ 4˝ 6˝ 8˝ 10˝ 12˝ 14˝ 16˝ 18˝ 20˝ 24˝

Bore Sizein 2.0 3.0 4.0 6.0 8.0 10.0 12.0 13.25 15.25 17.25 19.25 23.25

mm 51 76 102 152 203 254 305 337 387 438 489 591

Lin 7.0 8.0 9.0 15.5 18.0 21.0 24.0 27.0 30.0 34.0 36.0 42.0

mm 178 203 229 394 457 533 610 686 762 864 914 1067H1 in 4.8 6.8 7.8 11.7 11.8 12.8 14.4 15.7 17.3 19.7 21.8 21.8H2 in 3.2 4.1 5.1 8.4 15.3 15.9 17.9 19.3 21.6 24.4 26.8 26.8C in 11 15.75 25.6 41.3 - - - - - - - -D in - - - - 23.6 23.6 31.5 32.5 33.5 34.5 35.5 35.5

Weightlb 24.2 50.6 95 242 496 727 1079 1333 1963 2471 3260 5330kg 11 23 43 110 225 330 490 605 891 1122 1480 2420

Class 150 Size 26˝ 28˝ 30˝ 32˝ 34˝ 36˝ 40˝ 42˝ 48˝

Bore Sizein 25 27 29 30.75 32.75 36.5 38.5 40.25 46

mm 635 686 737 781 832 927 978 1022 1168

Lin 45 49 51 54 58 60 69 73 84

mm 1143 1245 1295 1372 1473 1524 1753 1855 2134H1 in 24.9 26.4 27.8 29.6 31.0 32.2 35.7 37.0 41.9H2 in 27.0 28.5 30.6 36.3 37.6 38.8 41.8 43.0 47.9C in - - - - - - - - -D in 35.5 35.5 35.5 35.5 31.5 31.5 55.1 55.1 55.1

Weightlb 5727 7511 12500 14210 17390 20260 25850 30460 42320kg 2600 3410 5670 6450 7890 9190 11730 13820 19200

Class 300 Size 2˝ 3˝ 4˝ 6˝ 8˝ 10˝ 12˝ 14˝ 16˝ 18˝ 20˝ 24˝

Bore Sizein 2.0 3.0 4.0 6.0 8.0 10.0 12.0 13.25 15.25 17.25 19.25 23.25

mm 51 76 102 152 203 254 305 337 387 438 489 591

Lin 8.5 11.0 12.0 16.0 20.0 22.5 25.5 30.0 33.0 36.0 39.0 45.0

mm 216 283 305 403 502 568 648 762 838 914 991 1143H1 in 4.8 6.8 7.8 10.2 11.8 12.8 14.4 15.75 17.3 19.7 21.8 21.8H2 in 3.2 4.1 5.1 13.4 15.3 15.9 17.9 19.3 21.6 24.4 26.8 26.8C in 11.0 15.7 25.6 - - - - - - - - -D in - - - 17.7 23.6 23.6 31.5 32.5 33.5 34.5 35.5 35.5

Weightlb 37.4 77 134 300 577 886 1284 1793 2489 3278 3731 6300kg 17 35 61 136 262 402 583 814 1130 1488 1694 2860

Class 300 Size 26˝ 28˝ 30˝ 32˝ 34˝ 36˝ 40˝ 42˝ 48˝

Bore Sizein 25 27 29 30.75 32.75 36.5 38.5 40.25 46

mm 635 686 737 781 832 927 978 1022 1168

Lin 49 53 55 60 64 68 77 82 85

mm 1245 1346 1379 1524 1626 1727 1956 2083 2170H1 in 25.7 26.9 28.3 29.7 31.1 32.2 35.8 37.4 42.6H2 in 31.7 32.6 34.1 35.7 36.2 37.6 41.9 43.3 53.3C in - - - - - - - - -D in 31.5 31.5 55.1 55.1 55.1 55.1 55.1 55.1 55.1

Weightlb 7269 9449 11630 14900 18250 21250 27130 31960 44430kg 3300 4290 5280 6760 8280 9640 12310 14500 20160





2˝ x 11/2˝ 14.5 14.6 14.5 1.5 2.0 5.7 3.7 17.7 10.3 - 1212˝ 14.5 14.6 14.5 2.0 2.0 6.1 4.1 23.6 10.3 - 137

3˝ x 2˝ 15.0 15.1 15.0 2.0 3.0 6.1 4.1 23.6 10.3 - 1523˝ 15.0 15.1 15.0 3.0 3.0 7.7 5.1 39.4 10.6 - 194

4˝ x 3˝ 18.0 18.1 18.0 3.0 4.0 7.7 5.1 39.4 10.6 - 2384˝ 18.0 18.1 18.0 4.0 4.0 7.9 6.5 - 11.0 19.7 282

6˝ x 4˝ 24.0 24.1 24.0 4.0 6.0 7.9 6.5 - 11.0 19.7 4106˝ 24.0 24.1 24.0 6.0 6.0 10.6 8.0 - 12.8 27.6 780

8˝ x 6˝ 29.0 29.1 29.0 6.0 8.0 10.6 8.0 - 12.8 27.6 9678˝ 29.0 29.1 29.0 8.0 8.0 11.6 10.2 - 14.0 27.6 1311

10˝ x 8˝ 33.0 33.1 33.0 8.0 10.0 11.6 10.2 - 14.0 27.6 154910˝ 33.0 33.1 33.0 10.0 10.0 15.4 12.6 - 17.7 27.6 2100

12˝ x 10˝ 38.0 38.1 38.0 10.0 12.0 15.4 12.6 - 17.7 27.6 248012˝ 38.0 38.1 38.0 12.0 12.0 17.6 14.8 - 20.5 27.6 3222

14˝ x 12˝ 40.5 40.9 40.5 12.0 12.75 17.6 14.8 - 20.5 27.6 358316˝ x 12˝ 44.5 44.9 44.5 12.0 14.75 17.6 14.8 - 20.5 27.6 3744

14˝ 40.5 40.9 47.6 12.75 12.75 14.8 16.5 - 17.8 27.6 380816˝ x 14˝ 44.5 44.9 44.5 12.75 14.75 14.8 16.5 - 17.8 27.6 3960

16˝ 44.5 44.9 44.5 14.75 14.75 18.1 18.5 - 21.6 27.6 492818˝ x 16˝ 48.0 48.5 48.0 14.75 16.75 18.1 18.5 - 21.6 27.6 629020˝ x 16˝ 52.0 52.5 52.0 14.75 18.625 18.1 18.5 - 21.6 27.6 6534

18˝ 48.0 48.5 48.0 16.75 16.75 19.8 20.1 - 23.4 27.6 660020˝ x 18˝ 52.0 52.5 52.0 16.75 18.625 19.8 20.1 - 23.4 27.6 7480

20˝ 52.0 52.5 52.0 18.625 18.625 21.9 22.1 - 28.0 55.1 959224˝ x 20˝ 61.0 61.7 61.0 18.625 22.5 21.9 22.1 - 28.0 55.1 12276

24˝ 61.0 61.7 61.0 22.5 22.5 25.2 25.6 - 31.3 55.1 1546630˝ x 24˝ 74.0 74.9 74.0 22.5 28.125 25.2 25.6 - 31.3 55.1 8980

26˝ 65.0 65.9 65.0 24.375 24.375 26.8 27.1 - 32.9 55.1 827028˝ 69.0 69.9 69.0 26.25 26.25 28.5 28.9 - 34.6 55.1 1020030˝ 74.0 74.9 74.0 28.125 28.125 30.5 31.1 - 41.2 55.1 12440

36˝ x 30˝ 90.0 91.1 90.0 28.125 33.75 30.5 31.1 - 41.2 55.1 1565032˝ 80.0 80.9 80.0 30.0 30.0 32.3 32.4 - 43.0 55.1 1210034˝ 85.0 86.1 85.0 31.875 31.875 33.8 33.9 - 44.4 55.1 1746036˝ 90.0 91.1 90.0 33.75 33.75 35.4 35.4 - 46.1 55.1 20150


SE-3SE-1



29

Two-Piece, Cast Steel Body, Metal-to-Metal Seat, Trunnion Ball Valve

Material SpecificationCarbon St. Body Stainless St. Body

No. PartsCS NACE TRIM SOUR S.S TRIM SOUR S.S TRIM SOUR Duples S.S TRIM SOUR

SERVICE SERVICE SERVICE SERVICE-5~300°C Max450°C Max450°C

1 BodyA216 WCB

A217 WC9 /A351 CF8 / CF8M

A351 CF8 / CF8M2 Body Cap A217 WC9+Inconel A890 4A / 5A / 6A

3 Ball A105+HCr / SFNi / T.C A351 CF8 / A182 F304+HCr / SFNi / T.C A890 4A / 5A / 6A / A182 F51 A351 CF8M / A182 F316+HCr / SFNi / T.C F53+HCr / SFNi / T.C

4 Stem A105+HCr / A182 F6a 17-4PH +HCrA182 F51 / F53+HCr

5 Trunnion +HCr A182 F51 / F53+HCr

6 Seat A105+STL / T.C A182 F304 / A182 F316+STL / T.C

A182 F51 / F53+STL / T.CA182 F51 / F53+STL / T.C

7 Spring Holder A105+ENP A182 F316 / F304 / F6a A182 F316 / F518 Spring INCONEL X-7509 Gland10 Gland Ring

A105+ENP A182 F316 / F304 / F6aA182 F316 / F304

11 Packing Ring A182 F51 / F5312 Lower Cover13 Drain Fitting 316SS14 Seal Ring R-PTFE Metal Metal15 Packing Fexible Graphite16 Gasket Metal & Flexible Graphite17 Stud A193 B7M A193 B8 / B8M18 Nut A194 2HM A194 8 / 8M19 Thrust Washer A182 F304 / F316 / F5120 Thrust Bearing21 Stem Bearing Metal Backed PTFE A182 316 (QPQ)22 Trunnion Bearing

-5~300°C

MAX 450°C


T.C: TUNGSTEN-CARBIDE QPQ: QUENCH-POLISH-QUENCH HCr: HARD CHROMIUM PLATING SFNi: Ni ALLOY OVERLAY




2˝ x 11/2˝ 14.5 14.6 14.5 1.5 2.0 5.7 3.7 17.7 10.3 - 1062˝ 14.5 14.6 14.5 2.0 2.0 6.1 4.1 23.6 10.3 - 137

3˝ x 2˝ 18.5 18.6 18.5 2.0 3.0 6.1 4.1 23.6 10.3 - 1853˝ 18.5 18.6 18.5 3.0 3.0 7.7 5.1 39.4 10.6 - 258

4˝ x 3˝ 21.5 21.6 21.5 3.0 4.0 7.7 5.1 39.4 10.6 - 3634˝ 21.5 21.6 21.5 4.0 4.0 7.9 6.5 - 11.0 27.6 520

6˝ x 4˝ 27.8 28.0 27.8 4.0 5.75 7.9 6.5 - 11.0 27.6 7206˝ 27.8 28.0 27.8 5.75 5.75 10.2 9.0 - 12.5 27.6 1090

8˝ x 6˝ 32.8 33.1 32.8 5.75 7.625 10.2 9.0 - 12.5 27.6 13728˝ 32.8 33.1 32.8 7.625 7.625 13.2 11.9 - 16.1 27.6 1897

10˝ x 8˝ 39.0 39.4 39.0 7.625 9.5 13.2 11.9 - 16.1 27.6 244510˝ 39.0 39.4 39.0 9.5 9.5 15.4 13.8 - 18.4 27.6 3075

12˝ x 10˝ 44.5 45.1 44.5 9.5 11.375 15.4 13.8 - 18.4 27.6 340312˝ 44.5 45.1 44.5 11.375 11.375 19.4 16.8 - 22.3 27.6 4405

14˝ x 12˝ 49.5 50.2 49.5 11.375 12.5 19.4 16.8 - 22.3 27.6 576416˝ x 12˝ 54.5 55.4 54.5 11.375 14.25 19.4 16.8 - 22.3 27.6 6358

14˝ 49.5 50.2 49.5 12.5 12.5 18.5 19.0 - 22.0 27.6 664416˝ 54.5 55.4 54.5 14.25 14.25 20.6 21.2 - 24.2 27.6 937218˝ 60.5 61.4 60.5 16.0 16.0 23.4 23.9 - 29.5 55.1 1408020˝ 65.5 66.4 65.5 18.0 18.0 26.8 27.4 - 32.9 55.1 2046024˝ 80.4 81.5 80.4 21.0 21.0 29.8 30.5 - 40.5 55.1 32010


Size L B B1 F E H D WGT LbRF RTJ WE2˝ x 11/2˝ 17.8 17.9 17.8 1.5 1.75 5.5 3.7 7.8 11.8 143

2˝ 17.8 17.9 17.8 1.75 1.75 5.7 6.7 7.8 11.8 1923˝ x 2˝ 22.8 23.0 22.8 1.75 2.5 5.7 6.7 7.8 27.6 363

3˝ 22.8 23.0 22.8 2.5 2.5 7.5 8.1 9.6 27.6 4734˝ x 3˝ 26.5 26.9 26.5 2.5 3.5 7.5 8.1 9.6 27.6 714

4˝ 26.5 26.9 26.5 3.5 3.5 8.9 9.4 11.0 27.6 8976˝ x 4˝ 36.0 36.5 36.0 3.5 5.25 8.9 9.4 11.0 27.6 1188

6˝ 36.0 36.5 36.0 5.25 5.25 12.0 11.2 15.0 27.6 18268˝ x 6˝ 40.2 40.9 40.2 5.25 7.125 12.0 11.2 15.0 27.6 2379

8˝ 40.2 40.9 40.2 7.125 7.125 15.7 14.6 18.7 27.6 315710˝ x 8˝ 50.0 50.9 50.0 7.125 8.875 15.7 14.6 18.7 27.6 3850

10˝ 50.0 50.9 50.0 8.875 8.875 18.5 17.1 22.0 27.6 488412˝ x 10˝ 56.0 56.9 56.0 8.875 10.5 18.5 17.1 22.0 27.6 5830

12˝ 56.0 56.9 56.0 10.5 10.5 21.3 19.5 27.2 24.4 7370 Note: Dimensions in inch. Weights in pound

SE-3SE-1


24

13


Carbon St. Body

CS NACE TRIM S.S. TRIMDuplex S.S. / SUPER

No. PartsSOUR SERVICE SOUR SERVICE

Duplex S.S. TRIMSOUR SERVICE

1 Body2 Body Cap A216 WCB / A216 WCB+ENP3 Lower Cover4 Ball A105+ENP A182 F6 / 316SS / 304SS A182 F51 / F53 / A890 4A / 5A / 6A5 Seat Insert PTFE / R-PTFE / NYLON / DEVLON / PEEK6 Stem

A105 + ENP / 4140+ENP A182 F51 / F537 TrunnionA182 F6 / F316 / F304

8 Seat Retainer A105 + ENP17-4PH

A182 F51 / F539 Thrust Bearing Metal Backed PTFE / Graphite10 Gasket Metal & Flexible Graphite11 Sealant Injection Fitting, Seat 4140 / 316SS (with an Internal Check Valve)12 Trunnion Bushing Metal Backed PTFE13 Stem Packing Graphite14 Sealant Injection Fitting, Stem 4140 / 316SS (with an Internal Check Valve)15 Anti-Static Device Stainless Steel16 Gland Ring A105+ENP 410SS / 316SS / 304SS F51 / F5317 Gland A216 WCB18 Gland Bolt A193 B7M19 Spring INCONEL X75020 O-Ring VITON / NBR21 Stud A193 B7M22 Nut A194 2HM23 Drain Fitting 316SS24 Key AISI 1045 / 4140



Stainless St. Body Duplex S.S. / SUPER Duplex S.S. Body Low Temp. St. Body

No. Parts S.S. TRIMDuplex S.S. / SUPER

CS NACE TRIM S.S. TRIMSOUR SERVICE

Duplex S.S. TRIMSOUR SERVICE SOUR SERVICESOUR SERVICE

1 Body2 Body Cap A351 CF8 / CF8M A890 4A / 5A / 6A A352 LCB / LCC / +ENP3 Lower Cover4 Ball 304SS / 316SS A182 F51 / F53 / A890 4A / 5A / 6A A350 LF2+ENP A182 F316 / A351 CF8M5 Seat Insert PTFE / R-PTFE / NYLON / DEVLON / PEEK6 Stem7 Trunnion F304 / F316 A182 F51 / F53 A350 LF2 + ENP A182 F3168 Seat Retainer9 Thrust Bearing Metal Backed PTFE / Graphite10 Gasket Metal & Flexible Graphite11 Sealant Injection Fitting, seat 316SS (with an Internal Check Valve)12 Trunnion Bushing

Metal Backed PTFE / Graphite13 Stem Packing14 Sealant Injection Fitting, Stem 316SS (with an Internal Check Valve)15 Anti-Static Device Stainless Steel16 Gland Ring 304SS / 316SS 316SS / F51 / F53

A350 LF2 / A352 LCB / A352 LCC+ENP17 Gland CF8 / CF8M A890 4A / 5A / 6A18 Gland Bolt A193 B8 / B8M A320 L7 / L7M19 Spring INCONEL X75020 O-Ring VITON / NBR / HNBR21 Stud A193 B8 / B8M A320 L7M22 Nut A194 8 / 8M A194 7M23 Drain Fitting 316SS24 Key AISI 1045 / 4140

30



1 BODY

2 BONNET

3 BALL WITH STEM/TRUNNION

4 SEAT INSERT

5 SEAT RETAINER

6 SEAT SPRING

7 GLAND

8 GLAND RING

9 LOW COVER

10 O-RING

11 O-RING

12 O-RING

13 O-RING

14 O-RING

15 BACK UP RING

16 GASKET

17 GASKET

18 BACK UP RING

19 SEALANT FITTING

20 PACKING

21 THRUST BEARING

22 STEM KEY

23 STEM BEARING

24 LEVER BAR

25 STUD

26 NUT


28 HEAD BOLT

29 PACKING

30 CLOSURE PIN

31 THREE WAY HEAD

32 SNAP RING

33 DRAIN FITTING

34 ANTI-STATIC DEVICE

35 SEALANT FITTING




No. Parts

1 Body

2 Body Cap

3 Lower Cover

4 Ball

5 Seat Insert

6 Stem

7 Trunnion

8 Seat Retainer

9 Thrust Bearing

10 Gasket

11 Stem Bushing

12 Trunnion Bushing

13 Stem O-Ring

14 Thrust Washer

15 Gland O-Ring

17 Gland

18 Gland Bolt

19 Plate / Coil Spring

20 O-Ring

21 Stud

22 Nut

23 Drain Fitting

24 Key


Material Specification Carbon St. Body Stainless St. Body

No. Parts NameCS NACE TRIM S.S. TRIM Duplex S.S. / SUPER Duplex S.S. TRIM

S.S TRIMSOUR SERVICE SOUR SERVICE SOUR SERVICE SOUR SERVICE

1 Body A216 WCB / +ENP A216 WCB+ENP A351 CF8M / CF8

2 Bonnet

3Ball C.S+ENP A182 F6 / 316SS / 304SS A182 F51 / F53+HCr 316SS / 304SS

Stem / Trunnion C.S+ENP A182 F6 / 316SS / 304SS A182 F51 / F53+HCr 316SS / 304SS

4 Seat Insert PTFE / R-PTFE / NYLON / DEVLON / PEEK5 Seat Retainer A105+ENP A182 F6 / 316SS / 304SS A182 F51 / F53 316SS / 304SS

6 Seat Spring INCONEL X7507 Gland A105 / A105+ENP 316 SS / 304SS

8 Injection Fitting 4140 / 316SS (with an Internal Check Valve) 316 SS

9 Lower Cover A105 + ENP 316 SS / 304 SS

12 O-ring VITON-B15 Backup Ring R-PTEE

17 Gasket Metal Backed PTFE / Graphite20 Packing Graphite23 Stem Bearing R-PTFE

25 Stud A193 B7M A193 B8 / B8M26 Nut A194 2HM A194 8 / 8M33 Drain Fitting 316SS

34 Anti-Static Device STAINLESS STEEL

31

Note: Other Material Standard can be Supplied Upon Request. T.C: TUNGSTEN-CARBIDE HCr: HARD CHROMIUM PLATING



2-PC Side Entry Trunnion Ball Valve 3-PC Side Entry Trunnion Ball Valve 1-PC Top Entry Trunnion Ball Valve

Specifications

• Basic Design: ANSI B16.34, API 6D

• Face to Face: ANSI B16.10, API 6D


• BW End: ANSI B16.25

• Test and Inspection: API 6D

Design Features

• Full & reduced bore, cast or forged steel body.

• Double Block and Bleed.

• Anti-static device, Low Emission

• Fire-safe Design / Tested to API 6FA.

• Operator Refer to MESC 77/ 130 & DHV Standard.

• Manufacturing to NACE MR0175 on request.

Application

DHV Side Entry Trunnion Mounted Ball Valve are designed, engineered and manufactured especially for oil

and gas pipeline application. Manufactured at our API certified facility, all DHV Trunnion Ball Valves provide

excellent corrosion resistance and superior sealing performance at both high and low pressures. DHV offers

a wide variety of material options to meet your critical needs from Carbon Steel to Duplex Stainless Steel and

Inconel, available DHV sizes from 2˝ to 48˝ in ANSI class 150-2500. DHV Trunnion Ball Valves are equipped

with standard features of Double Block & Bleed, Fire Safe, Emergency Sealant Injections, NACE MR0175

compliance and ISO mounting pads to all bare stem valves for gear or actuator adaption. We are ready and

eager to meet your special feature requirement like extended Stem/Bonnet, Transition Pups, Metal Seated,

Fully Welded Body and Actuation.

DHV Top Entry Trunnion Mounted Ball Valve is specially designed and developed for lower operating torque

and easy maintenance to meet the demands of our oil and gas pipeline customers. DHV one piece heavy

duty quality body offers convenient access to the stem and ball for on-site maintenance. DHV Top Entry Ball

Valve is available in various combinations of flanged or weld end connections from sizes 2˝ to 30˝, ANSI 150-

1500LB. Standard Features for DHV Top Entry Ball Valve include Double Block & Bleed, Fire Safe Design,

Emergency Sealant Injection, NACE MR0175 compliance and ISO Mounting pad. Extended stem/bonnet for

underground service is a typical option feature DHV Top Entry Ball Valve offers.

•

•

Trunnion Mounted Ball ValvesOne-Piece, Cast Steel Body, Class 150/300 Top Entry

Class 150 / 300 NPS 11/2˝FP 2˝RP 2˝FP 3˝RP 3˝FP 4˝RP 4˝FP 6˝RP 6˝FP 8˝RP 8˝FP 10˝RP 10˝FP 12˝RP 12˝FP

Bore inch 1.5 1.5 2.0 2.0 3.0 3.0 4.0 4.0 6.0 6.0 8.0 8.0 10.0 10.0 12.0

Size mm 38 38 51 51 76 76 102 102 152 152 203 203 254 254 305

L 150LB 241 178 292 203 356 229 432 394 559 457 660 533 787 610 838

(mm) 300LB 241 216 292 283 356 305 432 403 559 502 660 568 787 648 838

inch 3.5 3.5 4.1 4.1 4.9 4.9 5.9 5.9 7.2 7.2 10.8 10.8 12.5 12.5 14.3H1

mm 90 90 105 105 125 125 151 151 184 184 274 274 318 318 362

inch 4.9 4.9 5.6 5.6 7.7 7.7 8.6 8.6 11.3 11.3 16.0 16.0 17.7 17.7 20.1H2

mm 125 125 142 142 195 195 219 219 286 286 407 407 450 450 510

inch 17.7 17.7 17.7 17.7 23.6 23.6 23.6 23.6 39.4 39.4 - - - - -C

mm 450 450 450 450 600 600 600 600 1000 1000 - - - - -

inch - - - - - - - - - - 19.7 19.7 19.7 19.7 27.6D

mm - - - - - - - - - - 500 500 500 500 700

Weight 150LB 14.2 10.3 24.5 19.8 44 37 87 80 194 182 382 369 613 595 886

(kg) 300LB 16.4 12.6 30 25.2 52 47 100 94 208 201 405 400 668 656 923

Class 150 / 300 NPS 14˝FP 14˝RP 16˝FP 16˝RP18˝FP 18˝RP 20˝FP 20˝RP 24˝FP 26˝FP 28˝FP 30˝FP 32˝FP 34˝FP 36˝FP

Bore inch 12 13.25 13.25 15.25 15.25 17.25 17.25 19.25 23.25 25 27 29 30.75 32.75 34.5

Size mm 305 337 337 387 387 438 438 489 591 635 686 737 781 832 876

L 150LB 889 686 991 762 1092 864 1194 914 1397 1448 1549 1651 1778 1930 2083

(mm) 300LB 889 762 991 838 1092 914 1194 991 1397 1448 1549 1651 1778 1930 2083

inch 14.3 16.9 16.9 17.7 17.7 18.6 18.6 22.8 23.6 25.0 27.6 30.5 32.5 34.6 36.6H1

mm 362 428 428 450 450 473 473 580 600 635 700 775 825 880 930

inch 20.1 20.4 20.4 20.4 20.4 22.7 22.7 24.6 27.4 30.1 32.5 34.1 39.8 41.2 43.4H2

mm 510 517 517 519 519 577 577 626 696 765 825 865 1012 1047 1103

inch - - - - - - - - - - - - - - -C

mm - - - - - - - - - - - - - - -

inch 27.6 27.6 27.6 27.6 27.6 27.6 27.6 27.6 27.6 27.6 27.6 27.6 24.4 24.4 24.4D

mm 700 700 700 700 700 700 700 700 700 700 700 700 620 620 620

Weight 150LB 955 795 1160 955 1800 1570 2440 2000 3300 3970 4755 5820 7240 7960 9300

(kg) 300LB 1120 932 1518 1360 2110 1840 2860 2340 3870 4655 5575 6825 8490 9335 10900

32




Class 150 / 300

Design Features DHV Multi Port Three Way Ball Valves are designed for a large

array of services and suitable for either switching or mixing

application. Our design features allow quick and positive shutoff

with just a quarter turn. DHV Three Way Ball Valves provide many

features in standard L-Port or T-Port types. Each type offers many

variable positions and flow patterns to meet your particular service

needs.

Specifications • Basic Design: ANSI B16.34

• Face to Face: DHV Standard


• Test & Inspection: API - 598

Material for main parts1 Body WCB CF8 CF8M

2 Ball WCB / ENP F304 F316

3 Seat PTFE PTFE PTFE

4 Stem 13Cr F304 F316

5 Packing PTFE PTFE PTFE

DimensionsSize d d 1 L2 L1 H W

in mm in mm in mm in mm in mm in mm in mm

1/2˝ 15 1/2˝ 15 1/2˝ 15 5.51 140 2.76 70 2.52 64 5.12 130

3/4˝ 20 3/4˝ 20 3/4˝ 20 6.50 165 3.25 83 3.31 84 6.30 160

1˝ 25 1˝ 25 1˝ 25 6.50 165 3.25 83 3.31 84 6.30 160

11/2˝ 40 11/2˝ 40 11/2˝ 40 9.84 250 4.92 125 5.98 152 19.68 500

2˝ 50 2˝ 50 2˝ 50 10.24 260 5.12 130 6.18 157 19.68 500

21/2˝ 65 21/2˝ 65 21/2˝ 65 12.60 320 6.30 160 7.20 183 31.50 800

3˝ 80 3˝ 80 3˝ 80 12.60 320 6.30 160 7.20 183 31.50 800

4˝ 100 4˝ 100 4˝ 100 14.57 370 7.28 185 7.68 195 31.50 800

5˝ 125 5˝ 125 5˝ 125 20.08 510 10.04 255 13.98 355 33.46 850

6˝ 150 6˝ 150 5˝ 125 20.08 510 10.04 255 13.98 355 33.46 850

8˝ 200 8˝ 200 6˝ 150 22.84 580 11.42 290 16.93 430 59.06 1500

10˝ 254 10˝ 254 8˝ 203 26.38 670 13.19 335 18.70 475 - -

12˝ 300 12˝ 300 10˝ 254 28.35 720 14.17 360 21.65 550 - -

B. T-Type

A. L-Type

Three Way Ball Valves

33



Bore inch 1.5 1.5 2.0 2.0 3.0 3.0 4.0 4.0 6.0 6.0 8.0 8.0 10.0 10.0 12.0

Size mm 38 38 51 51 76 76 102 102 152 152 203 203 254 254 305

inch 9.5 11.5 11.5 14.0 14.0 17.0 17.0 22.0 22.0 26.0 26.0 31.0 31.0 33.0 33.0L

mm 241 292 292 356 356 432 432 559 559 660 660 787 787 838 838

inch 3.5 3.5 4.1 4.1 4.9 4.9 5.9 5.9 7.2 7.2 10.8 10.8 12.5 12.5 14.3H1

mm 90 90 105 105 125 125 151 151 184 184 274 274 318 318 362

inch 4.9 4.9 5.6 5.6 7.7 7.7 8.6 8.6 11.3 11.3 16.0 16.0 17.7 17.7 20.1H2

mm 125 125 142 142 195 195 219 219 286 286 407 407 450 450 510

inch 17.7 17.7 23.6 23.6 39.4 39.4 39.4 39.4 - - - - - - -C

mm 450 450 600 600 1000 1000 1000 1000 - - - - - - -

inch - - - - - - - - 27.6 27.6 27.6 27.6 27.6 27.6 27.6D

mm - - - - - - - - 700 700 700 700 700 700 700

Weight kg 19.5 21 36 46 63 85 109 152 236 301 423 506 694 740 977



Class 600 NPS 14˝FP 14˝RP 16˝FP 16˝RP18˝FP 18˝RP 20˝FP 20˝RP 24˝FP 26˝RP 28˝FP 30˝RP

Bore inch 12 13.25 13.25 15.25 15.25 17.25 17.25 19.25 23.25 25 27 29

Size mm 305 337 337 387 387 438 438 489 591 635 686 737

Linch 35 35 39 39 43 43 47 47 55 57 61 65

mm 889 889 991 991 1092 1092 1194 1194 1397 1448 1549 1651

inch 14.3 16.9 16.9 17.7 17.7 18.6 18.6 22.8 23.6 25.0 27.6 30.5H1

mm 362 428 428 450 450 473 473 580 600 635 700 775

inch 20.1 20.7 20.7 22.4 22.4 24.8 24.8 26.9 31.8 34.6 37.2 39.6H2

mm 510 526 526 568 568 629 629 682 808 880 945 1005

inch - - - - - - - - - - - -C

mm - - - - - - - - - - - -

inch 27.6 27.6 27.6 27.6 27.6 27.6 27.6 27.6 55.1 55.1 55.1 55.1D

mm 700 700 700 700 700 700 700 700 1400 1400 1400 1400

Weight (kg) 1230 1190 1430 1735 1940 2350 2700 3000 4950 5950 7130 8730


Design Features • Three-piece Body, Full Bore, Floating Ball. • Blow-out Proof Stem, Low Emission • Locking Device, on request. • NACE MR0175

Small Size Ball Valves1000 / 2000 / 3000 WOG

Specifications • End to End: DHV Standard • Thread End: ANSI B2.1 NPT • Socket Weld End: ANSI B16.11

Dimensions and weightsSize WOG DN 1/4˝ 3/8˝ 1/2˝ 3/4˝ 1˝ 11/4˝ 11/2˝ 2˝ 21/2˝ 3˝ 4˝

1000 / 2000in 0.46 0.5 0.59 0.79 1 1.26 1.5 2 2.56 3.15 3.94

Dmm 11.6 12.7 15 20 25.4 32 38 50.8 65 80 100

3000in - - 0.51 0.75 0.91 1.25 1.38 1.81 - - -

mm - - 13 19 23 32 35 46 - - -

1000 / 2000in 2.56 2.56 2.6 3.27 3.74 4.37 5.12 5.94 7.28 8.35 10.63

Lmm 65 65 66 83 95 111 130 151 185 212 270

3000in - - 3.62 4.37 5 5.24 5.98 6.77 - - -

mm - - 92 111 127 133 152 172 - - -

1000 / 2000in 1.65 1.65 1.93 2.05 2.44 2.6 3.03 3.35 5.47 5.90 6.81

Hmm 42 42 49 52 62 66 77 85 139 150 173

3000in - - 2.95 3.03 3.62 3.82 4.13 4.33 - - -

mm - - 75 77 92 97 105 110 - - -

1000 / 2000in 3.86 3.86 4.53 4.53 5.63 5.63 7.01 7.01 9.84 9.84 9.84

Cmm 98 98 115 115 143 143 178 178 250 250 250

3000in - - 4.84 6.3 6.3 7.68 7.68 9.84 - - -

mm - - 123 160 160 195 195 250 - - -

1000 / 2000lb 0.9 0.88 1.43 1.76 2.64 4.51 6.16 9.57 18.5 31.9 58.3

Weightskg 0.41 0.4 0.65 0.80 1.2 2.05 2.8 4.35 8.4 14.5 26.5

3000lb - - 3.89 5.8 10 16.52 20.02 24.23 - - -kg - - 1.77 2.63 4.54 7.5 9.09 11.00 - - -


No. Part 1000 / 2000 WOG 3000 WOGStainless Steel Carbon Steel Stainless Steel Carbon Steel

1 Body A351 CF8M A216 WCB A182 F316 A1052 Cap A351 CF8M A216 WCB A182 F316 A1053 Ball 316 304 A182 F3164 Seat 15% R-PTFE NYLON5 Stem A276-316 A182 F3166 Thrust Washer 15% R-PTFE 15% R-PTFE7 Stem Packing 15% R-PTFE 15% R-PTFE8 Bolt 304 SS A193 B8 / B8M A193 B7 / B7M9 Hex Nut 304 SS A194 8 / 8M A194 2H / 2HM

10 Bolt Washer Stainless Steel Stainless Steel11 Gland Nut A276-304 A182 F31612 Stem Washer A276-304 Stainless Steel13 Stem Nut A276-304 A194 8 / 8M A194 2H / 2HM14 Handle Stainless Steel Stainless Steel15 Plastic Cover Plastic Plastic16 Lock Device Stainless Steel Stainless Steel

34


Bore inch 1.5 1.5 2.0 2.0 3.0 3.0 4.0 4.0 6.0 6.0 8.0 8.0 10.0 10.0 12.0

Size mm 38 38 51 51 76 76 102 102 152 152 203 203 254 254 305

inch 12.0 14.5 14.5 15.0 15.0 18.0 18.0 24.0 24.0 29.0 29.0 33.0 33.0 38.0 38.0L

mm 305 368 368 381 381 457 457 610 610 737 737 838 838 965 965

inch 3.6 3.6 4.3 4.3 5.2 5.2 6.3 6.3 7.8 7.8 11.1 11.1 13.1 13.1 15.2H1

mm 92 92 110 110 133 133 160 160 197 197 282 282 334 334 387

inch 6.1 6.1 7.7 7.7 8.7 8.7 10.7 10.7 12.8 12.8 17.3 17.3 20.1 20.1 21.7H2

mm 155 155 195 195 220 220 272 272 325 325 440 440 510 510 550

inch 17.7 17.7 23.6 23.6 39.4 39.4 - - - - - - - - -C

mm 450 450 600 600 1000 1000 - - - - - - - - -

inch - - - - - - 19.7 19.7 27.6 27.6 27.6 27.6 27.6 27.6 27.6D

mm - - - - - - 500 500 700 700 700 700 700 700 700

Weight kg 32 40 56 62 78 103 128 168 260 320 452 557 727 778 1105


Bore inch) 12.0 12.75 12.75 14.75 14.75 16.75 16.75 18.625 22.5

Size mm 305 324 324 375 375 425 425 473 572

inch 40.5 40.5 44.5 44.5 48.0 48.0 52.0 52.0 61.0L

mm 1029 1029 1130 1130 1219 1219 1321 1321 1549

inch 15.2 17.3 17.3 18.3 18.3 19.1 19.1 23.6 24.4H1

mm 387 440 440 465 465 485 485 600 620

inch 21.7 21.5 21.5 23.8 23.8 25.6 25.6 30.5 32.9H2

mm 550 545 545 605 605 650 650 775 835

inch - - - - - - - - -C

mm - - - - - - - - -

inch 27.6 27.6 27.6 27.6 27.6 27.6 27.6 55.1 55.1D

mm 700 700 700 700 700 700 700 1400 1400

Weight kg 1855 1800 2160 2650 2925 3550 4100 4530 7450




Design Features

• Two-piece Body, Reduced & Full Bore,

Floating Ball.


• Locking Device, on request.

• NACE MR0175

Dimensions and weightsSize DN 1/4˝ 3/8˝ 1/2˝ 3/4˝ 1˝ 11/4˝ 11/2˝ 2˝ 21/2˝ 3˝

D in 0.46 0.5 0.59 0.79 0.98 1.26 1.54 2 2.56 3.15mm 11.6 12.7 15 20 25 32 39 50.8 65 80

L in 2.42 2.42 2.49 3.02 3.58 3.94 4.65 5.41 6.54 7.6mm 61.5 61.5 63.3 76.7 91 100 118 137.5 166 193

H in 1.89 1.89 1.93 2.17 2.72 3.03 3.31 3.66 5.43 6.10mm 48 48 49 55 69 77 84 93 138 155

C in 4.72 4.72 4.72 5.12 6.10 6.10 7.28 7.28 9.84 11.02mm 120 120 120 130 155 155 185 185 250 280

Weightslb 0.66 0.66 0.66 1.28 2.29 3.39 4.97 8.36 15 25.48kg 0.3 0.3 0.3 0.58 1.04 1.54 2.26 3.8 6.8 11.58

Specifications



• Socket Weld End: ANSI B16.11

Material SpecificationNo. Description Carbon Steel Stainless Steel

1 Body A216 WCB A351 CF8 A351 CF8M

2 Body Cap A216 WCB A351 CF8 A351 CF8M

3 Ball A276-304 A276-304 A276-316

4 Seat PTFE reinforced

5 Stem A276-304 A276-316

6 Body Seal PTFE

7 Thrust Washer PTFE

8 Packing PTFE

9 Gland Nut A276-304 A276-304

10/11 Nut & Washer Carbon Steel+Nickel Plated A276-304

12 Handle Carbon Steel+Nickel Plated A276-304


14 Locking Device Carbon Steel+Nickel Plated A276-304

Small Size Ball Valves1000 / 2000 WOG

35


Bore inch) 1.5 1.5 2.0 2.0 3.0 3.0 4.0 4.0 5.75 5.75 7.625 7.625 9.5 9.5 11.375

Size mm 38 38 51 51 76 76 102 102 146 146 194 194 241 241 289

inch 12.0 14.5 14.5 18.5 18.5 21.5 21.5 27.8 27.8 32.8 32.8 39.0 39.0 44.5 44.5L

mm 305 368 368 470 470 546 546 705 705 832 832 991 991 1130 1130

inch 3.7 3.7 4.5 4.5 5.3 5.3 6.5 6.5 8.0 8.0 11.6 11.6 14.0 14.0 15.9H1

mm 95 95 114 114 135 135 166 166 202 202 295 295 355 355 404

inch 6.4 6.4 7.9 7.9 9.2 9.2 11.3 11.3 13.7 13.7 18.7 18.7 21.3 21.3 23.1H2

mm 162 162 200 200 233 233 286 286 347 347 474 474 542 542 586

inch 17.7 17.7 23.6 23.6 39.4 39.4 - - - - - - - - -C

mm 450 450 600 600 1000 1000 - - - - - - - - -

inch - - - - - - 27.6 27.6 27.6 27.6 27.6 27.6 27.6 27.6 27.6D

mm - - - - - - 700 700 700 700 700 700 700 700 700

Weight kg 32 40 56 78 96 140 180 220 318 377 495 606 777 811 1324




Bore inch) 11.375 12.5 12.5 14.25 14.25 16.0 16.0 18.0 21.0

Size mm 289 318 318 362 362 407 407 457 534

inch 49.5 49.5 54.5 54.5 60.5 60.5 65.5 65.5 80.4L

mm 1257 1257 1384 1384 1537 1537 1664 1664 2043

inch 15.9 18.4 18.4 19.5 19.5 20.5 20.5 25.2 25.2H1

mm 404 467 467 495 495 520 520 639 640

inch 23.1 22.6 22.6 24.4 24.4 29.1 29.1 31.3 38.5H2

mm 586 575 575 620 620 740 740 795 979

inch - - - - - - - - -C

mm - - - - - - - - -

inch 27.6 27.6 27.6 27.6 27.6 55.1 55.1 55.1 55.1D

mm 700 700 700 700 700 1400 1400 1400 1400

Weight kg 2780 2700 3240 3980 4653 5325 6063 6800 11900


Small Size Ball Valves

Design Features • One-piece Body, Reduced Bore, Floating Ball


• NPT Threaded Ends

• Locking Device, on request

• NACE MR0175

Material SpecificationNo. Parts Carbon Steel Stainless Steel

11 Body AISI 1045 316SS

10 Inscrewed Part AISI 1045 316SS

9 Ball 316SS

8 Stem Nut 304SS

7 Stem 316SS

6 Seat 15% R-PTFE

5 Stem Packing Teflon

4 Packing Ring 304SS

3 Thrust Washer Teflon

2 Handle 304SS



Size 1/4˝ 3/8˝ 1/2˝ 3/4˝ 1˝ 11/4˝ 11/2˝ 2˝

D in 0.20 0.28 0.35 0.49 0.63 0.79 0.96 1.26mm 5 7 9 12.5 16 20 24.5 32

L in 1.57 1.77 2.28 2.36 2.83 3.15 3.35 4.02mm 40 45 58 60 72 80 85 102

H in 1.30 1.42 1.65 1.77 2.05 2.24 2.36 2.60mm 33 36 42 45 52 57 60 66

C in 2.64 2.64 3.54 3.54 4.41 4.41 5.20 5.20mm 67 67 90 90 112 112 132 132

Weights lb 0.15 0.24 0.37 0.55 0.88 1.47 1.80 2.86kg 0.07 0.11 0.17 0.25 0.4 0.67 0.82 1.30

Specifications



2000 WOG

36


Specifications

• Basic Design: ANSI B16.34 , API-6D

• End to End: ANSI B16.10 , API-6D

• Butt Weld End: ANSI B16.25

NO. DESCRIPTION

1 BODY

2 BALL

3 STEM

4 INNER SEAT RING

5 OUTER SEAT RING

6 SEAT O-RING

7 O-RING

8 BODY O-RING

9 GRAPHITE PACKING

10 STEM O-RING

11 GLAND O-RING

12 TRUNNION O-RING

13 END PIECE

14 SEAT COIL SPRING

15 TRUNNION

16 WRENCH BOLT

17 SEAT KEY

18 U-CUP RING

19 DRAIN FITTING

20 GREASE FITTING W / CHECK VALVE

21 RELIEF VALVE

22 GLAND FLANGE

23 WASHER

24 GLAND BUSHING

25 GLAND

26 GREASE FITTING(SEALANT INJECTOR)

27 STEM KEY

28 DOWEL PIN

29 DRY BEARING

30 THRUST WASHER

31 BEARING RETAINER


1/13Body CS ASTM A216-WCB, A106 Gr. B, A105, A352-LCB

End Piece SS ASTM A351-CF8 CF8M, A182-F304 F316

2 BallCS A105, A216-WCB, A352-LCB+ENP

SS ASTM A351-CF8 / CF8M, AISI 304 / 316, A217-CA15

3 StemCS A105 + ENP, AISI 4140+ENP

SS, AISI 304 / 316

Metal Seat With Insert Ring

4 Seats CS A36 / A216+Nickel Coating

SS ASTM A351-CF8,CF8M / AISI 304, 316

5-12 Seals Graphite, PTFE, FPM etc.,

14 Spring Inconel X-750

15 Trunnion AISI 304 316 or Equivalent

16 Stud / Nuts A193-B7 A194-2H, A193-B7M A194-2HM, A320-L7M A194-7M

16

22

9

24

25

11

27

1

13

14

718

174

6

5

23

10

26

3

28

84

2

2930

3119

12

15

20

21

Note:all materials may be adjustable at User's request.



NPS 1/2˝-3˝ NPS 4˝-6˝ NPS 8˝-12˝


* Gear operator is optional for these sizes.

Class 150 NPS 1/2˝ 3/4˝ 1˝ 11/2˝ 2˝X11/2˝ 2˝ 21/2˝X2˝ 21/2˝ 3˝X21/2˝ 3˝ 4˝X3˝ 4˝ 5˝ 6˝X4˝ 6˝ 8˝X6˝ 8˝ 10˝X8˝* 10˝* 12˝X10˝* 12˝ *

Bore in 1/2 3/4 1 11/2 11/2 2 2 2 1/2 2 1/2 3 3 4 5 4 6 6 8 8 10 10 12

Size mm 13 19 25 38 38 51 51 64 64 76 76 102 127 102 152 152 203 203 254 254 305

Lin 4.25 4.62 5.00 6.50 7.00 7.00 7.50 7.50 8.00 8.00 9.00 9.00 14.00 10.50 15.50 11.50 18.00 13.00 21.00 14.00 24.00

mm 108 117 127 165 178 178 190 190 203 203 229 229 356 267 394 292 457 330 533 356 610

Hin 2.30 2.50 3.00 3.80 4.50 5.0 5.0 6.0 6.00 6.00 6.40 7.00 10.00 7.50 10.70 11.40 13.50 13.40 13.60 15.40 15.70

mm 59 63 75 97 115 127 127 152 152 152 162 178 252 191 272 290 342 340 345 390 400

Cin 5.10 5.10 6.30 9.10 9.10 9.10 9.10 15.70 15.70 15.70 15.70 25.60 41.34 18.10 41.34 43.30 55.5 - - - -

mm 130 130 160 230 230 230 230 400 400 400 400 650 1050 460 1050 1100 1410 - - - -

Din - - - - - - - - - - - - - - - - 15.75 15.75 24.75 24.75 31.50

mm - - - - - - - - - - - - - - - - 400 400 629 629 800

WG.

lb 5 7 10 15 21 21 33 33 42 42 73 73 126 128 165 205 253 352 506 550 616

kg 2.2 2.7 4.5 7.0 9.5 9.5 15 15 19 19 23 30 58 55 75 83 115 128 230 310 370

Class 300 NPS 1/2˝ 3/4˝ 1˝ 11/2˝ 2˝X11/2˝ 2˝ 21/2˝X2˝ 21/2˝ 3˝X21/2˝ 3˝ 4˝X3˝ 4˝ 5˝ 6˝X4˝ 6˝ 8˝X6˝ 8˝* 10˝X8˝* 10˝* 12˝X10˝* 12˝*

Bore in 1/2 3/4 1 11/2 11/2 2 2 2 1/2 2 1/2 3 3 4 5 4 6 6 8 8 10 10 12

Size mm 13 19 25 38 38 51 51 64 64 76 76 102 127 102 152 152 203 203 254 254 305

Lin 5.50 6.00 6.50 7.50 8.50 8.50 9.50 9.50 11.12 11.12 12.00 12.00 15.00 15.88 15.88 16.50 19.75 18.00 22.38 19.75 25.50

mm 140 152 165 190 216 216 241 241 283 283 305 305 381 403 403 419 502 457 568 502 648

Hin 2.3 2.5 3.0 3.8 4.50 5.0 5.0 6.0 6.0 6.0 6.40 7.0 10.0 7.50 10.7 11.40 13.5 13.40 13.6 15.40 15.7

mm 59 63 75 97 115 127 127 152 152 152 162 178 252 191 272 290 342 340 345 390 400

Cin 5.1 5.1 6.3 9.10 9.10 9.10 9.10 15.70 15.70 15.70 15.70 27.60 43.30 18.10 43.30 43.30 - - - - -

mm 130 130 160 230 230 230 230 400 400 400 400 700 1100 460 1100 1100 - - - - -

Din - - - - - - - - - - - - - - - - 24.78 21.88 31.50 31.50 31.50

mm - - - - - - - - - - - - - - - - 629 556 800 800 800

WG.

lb 5.5 7.7 12.1 23.1 32 32 52 52 66 66.0 88 143 178.2 178 209 260 330 440 550 691 836

kg 2.5 3.5 5.5 9 13 13 21 21 24 27 38 40 65 72.5 95.0 118.0 150.0 224 257.5 380 420

Class 600 NPS 1/2˝ 3/4˝ 1˝ 11/2˝ 2˝x11/2˝ 2˝ 3˝x2˝ 3˝ 4˝x3˝ 4˝

Bore in 1/2˝ 3/4˝ 1˝ 11/2˝ 11/2˝ 2˝ 2˝ 3˝ 3˝ 4

Size mm 13 19 25 38 38 51 51 76 76 102

Lin 6.5 7.5 8.5 9.5 11.5 11.5 14 14 17 17

mm 165 190 216 241 292 292 356 356 432 432

Hin 2.9 3.1 4.0 4.4 4.4 5.5 5.5 12.2 12.2 13.8

mm 74.5 79.5 101 111 111 140 140 310 310 350

Cin 6.3 6.3 9.1 9.1 9.1 15.7 15.7 31.5 31.5 41.3

mm 160 160 230 230 230 400 400 800 800 1050

WG.

lb 7.7 13.2 17.6 28.6 50.7 55.1 88.1 99.1 143.2 154.2

kg 3.5 6 8 13 23 25 40 45 65 70

Class 900 NPS 1/2˝ 3/4˝ 1˝ Bore in 1/2 3/4 1

Size mm 13 19 25

Lin 8.5 9.0 10.0

mm 216 229 254

Hin 5.4 5.6 5.6

mm 138 141 143

Cin 6.3 9.1 9.1

mm 160 230 230

WG.

lb 22.0 24.2 30.8

kg 10 11 14

Class 1500 NPS 1/2˝ 3/4˝ 1˝ Bore in 1/2 3/4 1

Size mm 13 19 25

Lin 8.5 9.0 10.0

mm 216 229 254

Hin 5.4 5.6 5.6

mm 138 141 143

Cin 6.3 9.1 9.1

mm 160 230 230

WG.

lb 22.0 24.2 30.8

kg 10 11 14

37



Class Size D L H 1 H L1 WG.

in mm in mm in mm in mm in mm lb kg2˝ 2.00 51 8.5 216 3.23 82 4.17 106 12 305 41 193˝ 3.00 76 11.1 283 4.57 116 5.24 133 17.7 450 73 334˝ 4.00 102 12 305 5.55 141 6.26 159 36 915 114 52

6˝ 6.00 152 18 457 11.9 301 8.46 215 - - 385 175

8˝ 8.00 203 20.5 521 13.4 340 9.92 252 - - 444 202

10˝ 10 254 22 559 14.9 378 11.6 295 - - 572 260

12˝ 12 305 25 635 16.4 417 13.5 342 - - 902 410

14˝ 13.3 337 30 762 18.3 466 14.7 373 - - 1302 592

150 16˝ 15.2 387 33 838 19.9 506 16.3 414 - - 1969 895

LB 18˝ 17.2 438 36 914 21.5 545 18 458 - - 2638 1199

20˝ 19.3 489 39 991 23.1 586 19.4 492 - - 3408 1549

22˝ 21.3 540 43 1092 24.8 631 21.1 537 - - 4510 2050

24˝ 23.3 591 45 1143 26.3 669 22.6 573 - - 5698 2590

26˝ 25 635 49 1245 28.3 718 24.5 622 - - 7016 3189

28˝ 27 686 53 1346 29.6 752 25.9 658 - - 8479 3854

30˝ 29 737 55 1397 31.7 805 27.4 697 - - 9680 4400

32˝ 30.7 781 60 1524 33.2 844 29 736 - - 11636 5289

34˝ 32.8 832 64 1626 34.4 873 30.9 784 - - 13640 6200

2˝ 2.00 51 8.5 216 3.23 82 4.17 106 17.7 405 46 213˝ 3.00 76 11.1 283 4.57 116 5.24 133 36 915 77 354˝ 4.00 102 12 305 5.55 141 6.26 159 36 915 150 68

6˝ 6.00 152 15.9 403 11.9 301 8.46 215 - - 422 192

8˝ 8.00 203 20.5 521 13.4 340 9.92 252 - - 464 211

10˝ 10 254 22 559 14.9 378 11.6 295 - - 638 290

12˝ 12 305 25 635 16.4 417 13.5 342 - - 856 389

14˝ 13.3 337 30 762 18.3 466 14.7 373 - - 1342 610

300 16˝ 15.2 387 33 838 19.9 506 16.3 414 - - 1980 900

LB 18˝ 17.2 438 36 914 21.5 545 18 458 - - 2849 1295

20˝ 19.3 489 39 991 23.1 586 19.4 492 - - 3606 1639

22˝ 21.3 540 43 1092 24.8 631 21.1 537 - - 4796 2180

24˝ 23.3 591 45 1143 26.3 669 22.6 573 - - 6028 2740

26˝ 25 635 49 1245 28.3 718 24.5 622 - - 7480 3400

28˝ 27 686 53 1346 29.6 752 25.9 658 - - 8943 4065

30˝ 29 737 55 1397 31.7 805 27.4 697 - - 10340 4700

32˝ 30.7 781 60 1524 33.2 844 29 736 - - 12100 5500

34˝ 32.8 832 64 1626 34.4 873 30.9 784 - - 14740 6700


Design Features

• Two-piece Body




8˝-12˝ Gear operation


Specifications


• Face to Face: ANSI B16.10 LONG PATTERN





Material Specification Material Standard Material Standard

No. Standard

Carbon Steel Stainless Steel No. Standard

Carbon Steel Stainless Steel

Parts to ASTM to ASTM Parts to ASTM to ASTM

1 Body A216-WCB A351-CF8 / CF8M 9 Stem Bearing Metal Backed PTFE / Graphite

2 Body Cap A216-WCB A351-CF8 / CF8M 10 Gland Bolt A105, 1035

3 Stem A276-316 / 304 / 410 A276 - 304 / 316 11 Stud A193-B7 A193-B8

4 Gland A276-410 / 304 / 316 / A105+ENP A276 - 304 / 316 12 Nut A194-2H A194-8

5 Ball A216-WCB+ENP / A351-CF8M / CF8 A276-304 / 316 / A351-CF8M / CF8 13 Thrust Washer Metal Backed PTFE / Graphite

6 Flange A216 - WCB A351-CF8 / CF8M 14 Spring A276-302 A276-302 / 316

7 Stem Packing PTFE / Graphite PTFE / Graphite15 Seat

PTFE / Graphite / Metal Backed STL /

8 Gasket PTFE / Graphite PTFE / Graphite Metal Backed Rubber

38


Dimensions and weightsClass Size D L H 1 H L1 WG.

in mm in mm in mm in mm in mm lb kg2˝ 2 51 11.5 292 3.35 85 4.17 106 24 610 51 233˝ 3 76 14 356 4.72 120 6.1 155 35.4 900 108 494˝ 4 102 17 432 5.71 145 7.48 190 47.2 1200 211 966˝ 6 152 22 559 12.2 310 8.46 215 - - 530 2418˝ 8 203 26 660 13.78 350 9.92 252 - - 550 250

10˝ 10 254 31 787 15.35 390 11.6 295 - - 759 34512˝ 12 305 33 838 16.93 430 13.5 342 - - 1166 53014˝ 13.3 337 35 889 18.9 480 14.7 373 - - 1716 780

600 16˝ 15.2 387 39 991 20.55 522 16.3 414 - - 2640 1200LB 18˝ 17.2 438 43 1092 22.13 562 18 458 - - 3520 1600

20˝ 19.3 489 47 1194 23.78 604 19.4 492 - - 4477 203522˝ 21.3 540 51 1295 25.59 650 21.1 537 - - 5940 270024˝ 23.3 591 55 1397 27.17 690 22.6 573 - - 7464 339226˝ 25 635 57 1448 29.13 740 24.5 622 - - 9130 415028˝ 27 686 61 1549 30.51 775 25.9 658 - - 11220 510030˝ 29 737 65 1651 32.68 830 27.4 697 - - 12720 578232˝ 30.7 781 70 1778 34.25 870 29 736 - - 15180 690034˝ 32.8 832 76 1930 35.43 900 30.9 784 - - 18117 8235

2˝ 2.0 51 14.5 368 3.46 88 4.69 119 24 610 88 403˝ 3.0 76 15 381 4.92 125 6.1 155 35.4 900 136 624˝ 4.0 102 18 457 5.94 151 7.48 190 47.2 1200 231 1056˝ 6.0 152 24 610 9.84 250 9.49 241 - - 656 2988˝ 8.0 203 29 737 11.42 290 10.83 275 - - 726 330

10˝ 10 254 33 838 13.58 345 12.48 317 - - 924 42012˝ 12 305 38 965 15.35 390 14.37 365 - - 1386 63014˝ 12.75 324 40.5 1029 17.72 450 15.31 389 - - 2068 94016˝ 14.75 375 44.5 1130 19.69 500 16.89 429 - - 3190 1450

900 18˝ 16.75 425 48 1219 21.65 550 19.13 486 - - 4246 1930LB 20˝ 18.75 476 52 1321 23.31 592 20.87 530 - - 5500 2500

22˝ 20.63 524 - - 25.79 655 21.93 557 - - 7150 325024˝ 22.5 572 61 1549 27.48 698 24.33 618 - - 8976 408026˝ 24.38 619 - - 29.92 760 26.26 667 - - 11022 501028˝ 26.25 667 - - 31.89 810 27.91 709 - - 13332 606030˝ 28.13 715 - - 32.8 833 29.65 753 - - 14740 670032˝ 30.00 762 - - 35.83 910 31.93 811 - - 18370 835034˝ 31.88 810 - - 37.8 960 33.35 847 - - 21626 9830

2˝ 2.0 51 14.5 368 4.29 109 4.69 119 23.6 600 97 443˝ 3.0 76 18.5 470 6.06 154 6.1 155 35.4 900 196 894˝ 4.0 102 21.5 546 7.32 186 7.48 190 47.2 1200 330 1506˝ 5.75 146 27.8 705 12.6 320 11.02 280 - - 746 3398˝ 7.63 194 32.8 832 14.61 371 12.87 327 - - 836 380

10˝ 9.50 241 39 991 17.4 442 15.43 392 - - 1098 49912˝ 11.38 289 44.5 1130 19.65 499 16.65 423 - - 1672 76014˝ 12.50 318 49.5 1257 22.68 576 19.65 499 - - 2442 111016˝ 14.25 362 54.5 1384 25.2 640 21.97 558 - - 3718 1690

1500 18˝ 16.26 413 - - 27.72 704 23.19 589 - - 5104 2320LB 20˝ 17.99 457 - - 29.84 758 28.5 724 - - 6468 2940

22˝ 19.76 502 - - 32.99 838 30.2 767 - - 8554 388824˝ 21.61 549 - - 35.16 893 32.01 813 - - 10780 490026˝ 23.5 597 - - 38.31 973 35.47 901 - - 13200 600028˝ 25.24 641 - - 40.83 1037 37.05 941 - - 16060 730030˝ 27.01 686 - - 41.97 1066 40.75 1035 - - 18458 839032˝ 28.74 730 - - 45.87 1165 41.73 1060 - - 21956 998034˝ 30.51 775 - - 48.39 1229 44.88 1140 - - 26180 11900

* Class 150LB & 300LB Reduced Bore are Short Pattern.


Design Features • One-piece Body




8˝-10˝ Optional gear operation


Specifications


• Face to Face: ANSI B16.10 SHORT PATTERN




Floating Ball ValvesOne-Piece Body Class 150 / 300

Dimensions Class 150 Size 1/2˝ 3/4˝ 1˝ 11/2˝ 2˝ 3˝ 4˝ 6˝ 8˝ 10˝

Ainch 0.39 0.49 0.67 1.18 1.5 2.28 3.0 4.49 6.0 7.36

mm 9.91 12.4 17 30 38.1 57.9 76.2 114 152 186.9

Binch 0.59 0.79 0.98 1.57 2.0 3.0 4.0 6.0 8.0 10

mm 15 20.1 24.9 39.9 50.8 76.2 102 152 203 254

Linch 4.25 4.62 5 6.5 7 8 9.0 10.5 11.5 13

mm 108 117 127 165 178 203 229 267 292 330.2

Hinch 2.08 2.08 2.65 3.32 4.11 5.72 6.29 8.13 9.98 11.46

mm 52.8 52.8 67.3 84.3 104 145 160 207 253 291.1

Cinch 4.5 5.2 5.2 6.4 9.00 15.9 15.9 17.5 43.0 59

mm 114 132 132 163 229 404 404 445 1092 1499

weight (lb) 4 6 7 13 20 35 61 110 183 353

Dimensions Class 300 Size 1/2˝ 3/4˝ 1˝ 11/2˝ 2˝ 3˝ 4˝ 6˝ 8˝

Ainch 0.39 0.49 0.67 1.18 1.5 2.3 3.0 4.49 6.0

mm 9.91 12.4 17 30 38.1 57.9 76.2 114 152

Binch 0.59 0.79 0.98 1.57 2.0 3.0 4.0 6.0 8.0

mm 15 20.1 24.9 39.9 50.8 76.2 102 152 203

Linch 5.5 6 6.5 7.5 8.5 11.1 12.0 15.9 16.5

mm 140 152 165 191 216 282 305 403 419

Hinch 3.58 3.66 4.09 3.82 4.09 5.71 6.29 10 11.4

mm 90.9 93 104 97 104 145 160 254 289

Cinch 4.5 5.2 5.2 6.4 9.00 15.9 15.9 29 43.0

mm 114 132 132 163 229 404 404 737 1092

weight (lb) 6 10 11 19 26 52 86 143 309

39


Rising Stem Ball ValvesOne-Piece, Cast Steel Body, Special Ball Valve

Design Features • One-Piece Body • Top Entry • Rising Stem Type • Downstream Seal • Low Torque, low Emission • Long Service Life

Specifications • Basic Design: ANSI B16.34 • Face to Face: DHV Standard

ANSI B16.10 • End Flanged: ANSI B16.5 • BW End: ANSI B16.25 • Test and Inspection: API 598, API 6D

Note: Other Material Standard can be Supplied Upon Request

Core rotated to 90° withouttouching the seat Full Close Position

Full Open PositionCore rotated against

guide pins

Carbon St. Body Stainless St. Body

No. Parts Name CS NACE TRIM S.S. TRIMDuplex S.S. / SUPER S.S. TRIM

Duplex S.S. TRIMSOUR SERVICE SOUR SERVICESOUR SERVICE SOUR SERVICE

1 BodyA216 WCB / WCC / WC6/ WC9 + ENP A351 CF8 / CF8M2 Bonnet

3 Seat A105+STL 13Cr / 304SS / 316SS+STL A182 F51 / F53+STL A182 F304 / F316+STL4 Core WCB+STL CA15 / CF8 / CF8M+STL A890 4A / 5A+STL CF8 / CF8M+STL5 Stem 17-4PH A182 F51 / F53 17-4PH6 Support Pin CARBON STEEL STAINLESS STEEL7 Core Pin 304SS / 316SS / 17-4PH8 Bonnet Bushing 13Cr / 17-4PH A182 F51 / F53 17-4PH9 O-Ring VITON-B10 Gasket Sprial Woud 316SS Graphite11 Trunnion Bush 17-4PH A182 F51 / F53 304SS / 316SS/ 17-4PH12 Bolts A193 B7M A193 B8 / B8M13 Nuts A194 2HM A194 8 / 8M14 Packing Graphite15 Gland A216 WCB / WCC / WC6/ WC9 A351 CF8 / CF8M16 Gland Eyebolt A193 B7M A193 B8 / B8M17 Nuts A194 2HM A194 8 / 8M18 Stem Guide 17-4PH A182 F51 / F53 17-4PH19 Bearing Cover CARBON STEEL STAINLESS STEEL20 Stem Nut A439 D221 Bearing STEEL+PTFE22 Handwheel Cast Iron23 Indicator STAINLESS STEEL

Upstream Downstream


Floating Ball Valves

Material SpecificationNo. Part Name Carbon Steel Stainless Steel No. Part Name Material

1 Body ASTM A216 WCB ASTM A351 CF8M 11 Body Gasket Virgin PTFE / Graphite

2 Insert ASTM A216 WCB ASTM A351 CF8M 12 Lock Plate AISI 304

3 Ball ASTM A351 CF8M 13 Snap Ring Stainless Steel

4 Stem Subassembly ASTM A276-316 14 Gland Bolt ASTM A193 B7M

5 Gland ASTM A351 CF8 17 Handle Ductile Iron

6 Seat Glass Filled PTFE 18 Name Plate Stainless Steel

7 Stem Bearing Metal Backed PTFE 19 Drive Screw Stainless Steel

8 Thrust Washer Metal Backed PTFE • 20 Handle Adapter Ductile Iron

9 Gland Bushing PTFE • 21 Handle Pipe Carbon Steel

10 Stem Packing PTFE / Graphite • 22 Hex Bolt Carbon Steel

One-Piece Body Class 150 / 300

• No. 20 21 22 are used on 6˝ and larger valves.

40

Rising Stem Ball ValvesOne-Piece, Cast Steel Body, Special Ball Valve, Full Bore


Bore in 0.75˝ 1˝ 1.5˝ 2˝ 3˝ 4˝ 6˝ 8˝ 10˝ 12˝ 15.25˝ 17.25˝ 19.25˝ 23.25˝ 27.25˝Size mm 19 25 38 51 76 102 152 203 254 305 387 438 489 591 692

Lin 4.6 8.5 9.5 7.0 8.0 12.0 15.9 18.0 26.5 30.0 35.5 43.0 49.2 57.1 66.9

mm 117 216 241 178 203 305 403 457 673 762 902 1092 1250 1450 1700

H1in 9.8 11.8 13.8 15.0 17.7 19.7 23.6 25.6 - - - - - - -

mm 250 300 350 380 450 500 600 650 - - - - - - -

H2in - - - - - - - - 27.6 33.5 51.2 57.1 63.0 74.8 82.7

mm - - - - - - - - 700 850 1300 1450 1600 1900 2100


Bore in 0.75˝ 1˝ 11/2˝ 2˝ 3˝ 4˝ 6˝ 8˝ 10˝ 12˝ 13.23˝ 15.25˝ 19˝ 23˝ 27˝Size mm 19 25 38 51 76 102 152 203 254 305 337 387 483 584 686

Lin 6.0 8.5 9.5 8.5 11 12.0 15.9 19.8 26.5 30.0 32.5 35.5 47.0 57.1 66.9

mm 152 216 241 216 282 305 403 502 673 762 826.0 902 1194 1450 1700

H1in 12.6 13.8 15.7 17.7 21.7 23.6 27.6 29.5 - - - - - - -

mm 320 350 400 450 550 600 700 750 - - - - - - -

H2in - - - - - - - - 31.5 39.4 47.2 55.1 66.9 78.7 86.6

mm - - - - - - - - 800 1000 1200.0 1400 1700 2000 2200

Dimensions 600LB NPS 3/4˝ 1˝ 11/2˝ 2˝ 3˝ 4˝ 6˝ 8˝ 10˝ 12˝ 16˝ 20˝ 24˝ 28˝

Bore in 0.75˝ 1˝ 11/2˝ 2˝ 3˝ 4˝ 6˝ 7.87˝ 9.75˝ 11.75˝ 14.75˝ 18.25˝ 22˝ 25.5˝Size mm 19 25 38 51 76 102 152 200 248 298 381 479 575 648

Lin 7.5 8.5 9.5 11.5 14.0 17.0 22.0 26.0 31.0 33.0 39.0 47.0 55.0 61.0

mm 190 216 241 292 356 432 559 660 787 838 991 1194 1397 1549

H1in 11.8 12.6 15.0 15.7 19.7 21.7 25.6 27.6 - - - - - -

mm 300 320 380 400 500 550 650 700 - - - - - -

H2in - - - - - - - 27.6 33.5 39.4 59.1 70.9 82.7 90.6

mm - - - - - - - 700 850 1000 1500 1800 2100 2300

Dimensions 900LB NPS 3/4˝ 1˝ 11/2˝ 2˝ 3˝ 4˝ 6˝ 8˝ 10˝ 12˝ 16˝ 20˝

Bore in 0.69˝ 0.87" 1.37˝ 1.87˝ 2.87˝ 3.87˝ 5.75˝ 7.5˝ 9.37˝ 11.12˝ 14˝ 17.5˝Size mm 18 22 35 47 73 98 146 191 234 282 356 445

Lin 9.0 10.0 12.0 14.6 15.1 18.1 24.1 29.1 33.1 38.1 44.9 52.0

mm 229 254 305 371 384 460 613 740 841 968 1140 1321

H1in 11.8 12.6 15.0 15.7 19.7 21.7 25.6 - - - - -

mm 300 320 380 400 500 550 650 - - - - -

H2in - - - - - - - 27.6 33.5 39.4 59.1 59.1

mm - - - - - - - 700 850 1000 1500 1500

H

L

H2

L


DHV Figure Numbers

2

Examp le :8 ˝ -B5601F13-GO

8˝ Ball Valve, Trunnion Ball,Three - Piece Body, Full Bore, Class600LB, A105 Body & Adapter RaisedFace Flanged End, with A105 + ENPTrim and Nylon + Viton / GraphiteSeat and Seal, Gear Operated.

Type 1 = Floating Ball Split Body,

Full Bore 2 = Floating Ball Split Body, Reduced Bore

3 = Trunnion Ball Two-Piece Body, Full Bore 4 = Trunnion Ball Two-Piece Body,

Reduced Bore 5 = Trunnion Ball Three-Piece Body, Full Bore

6 =Trunnion Ball Three-Piece Body, Reduced Bore 7 = Floating Ball One-Piece Body,

Reduced Bore 8 = Small Size Ball Valves 9 = Top Entry Trunnion Ball Valves

0 = Three Way Ball Valves A = Metal-to-Metal Seat Ball Valves C = Full Welded Body Ball Valves

D = Rising Stem Ball Valves, Full Bore E = Rising Stem Ball Valves, Reduced Bore X = Special

Pressure Class 15 = Class 150

30 = Class 300

60 = Class 600

90 = Class 900

150 = Class 1500

250 = Class 2500

10 = 1000 WOG

20 = 2000 WOG

30 = 3000 WOGCode C = Cast Steel Valves

F = Forged Steel Valves

I = Cast Iron Valves

B = Ball Valves

End ConnectionsF = Raised Face Flanged End

R = Ring Type Joint Flanged End

P = Plain Flat Face Flanged End

B = Butt-welded End

T = Threaded End

S = Socked-Welded End

X = Other Type End Connection

Trim Material 1 = C.S. +ENP

2 = 304SS

3 = 316SS

4 = 13Cr / F6

5 = Duplex S.S.

6 = Monel

7 = Inconel

8 = B16

9 = B62

0 = S.S.+T.C

A = S.S.+SFNi

B = S.S.+HCr

C = Super Duplex S.S.

X = Special

Seat Material1 = PTFE

2 = R-PTFE

3 = NYLON

4 = VITON

5 = DEVLON

6 = NBR

7 = PEEK (HT4)

8 = SFNi

9 = STL

A = HCr

B = T.C

M = NYLON-M

X = Special

OperatorNONE = Lever or Handwheel

Operator

CO = Chain Wheel Operator

GO = Gear Operator

BS = Bare Stem

EM = Electric Motor Operator

PA = Pneumatic Actuator

HA = Hydraulic Actuator

PH = Pneumatic-Hydraulic

Actuator

Body Material 0 = ASTM A216 WCB

1 = ASTM A105

2 = ASTM A352 LCB

3 = ASTM A350 LF2

4 = ASTM A351 CF8M

5 = ASTM A182 F316

6 = ASTM A351 CF8

7 = ASTM A182 F304

8 = ASTM A890 4A

9 = ASTM A182 F51

A = ASTM A352 LCC

B = Inconel

C = Monel

D = Super Duplex S.S.

X = Special

Ball Valves

Rising Stem Ball ValvesOne-Piece, Cast Steel Body, Special Ball Valve, Reduced Bore

Dimensions 150LB NPS 2˝x11/2˝ 3˝x2˝ 4˝x3˝ 6˝x4˝ 8˝x6˝ 10˝x8˝ 12˝x10˝ 14˝x12˝ 16˝x12˝ 18˝x16˝ 20˝x16˝

Bore in 1.5˝ 2˝ 3˝ 4˝ 6˝ 8˝ 10˝ 12˝ 12˝ 15.25˝ 15.25˝Size mm 38 51 76 102 152 203 254 305 305 387 387

Lin 7.0 8.0 9.0 15.5 18.0 21.0 30.0 32.5 35.5 36.0 39.0

mm 178 203 229 394 457 533 762 826 902 914 991

H1in 13.8 15.0 17.7 19.7 23.6 25.6 - - - - -

mm 350 380 450 500 600 650 - - - - -

H2in - - - - - - 27.6 33.5 33.5 51.2 51.2

mm - - - - - - 700 850 850 1300 1300


Bore in 1.5˝ 2˝ 3˝ 4˝ 6˝ 8˝ 10˝ 12˝ 12˝ 15.25˝ 15.25˝ 19˝Size mm 38 51 76 102 152 203 254 305 305 387 387 483

Lin 8.5 11.1 12.0 15.9 19.8 22.4 30.0 32.5 35.5 36.0 39.0 55.0

mm 216 282 305 403 502 568 762 826 902 914 991 1397

H1in 15.7 17.7 21.7 23.6 27.6 29.5 - - - - - -

mm 400 450 550 600 700 750 - - - - - -

H2in - - - - - - 31.5 39.4 39.4 55.1 55.1 66.9

mm - - - - - - 800 1000 1000 1400 1400 1700


Bore in 1.5˝ 2˝ 3˝ 4˝ 6˝ 7.87˝ 9.75˝ 11.75˝ 11.75˝ 14.75˝ 14.75˝ 18.25˝Size mm 38 51 76 102 152 200 248 298 298 381 381 479

Lin 11.5 14.0 17.0 22.0 26.0 31.0 33.0 35.0 39.0 43.0 47.0 55.0

mm 292 356 432 559 660 787 838 889 991 1092 1194 1397

H1in 15.0 15.7 19.7 21.7 25.6 27.6 - - - - - -

mm 380 400 500 550 650 700 - - - - - -

H2in - - - - - 27.6 33.5 39.4 39.4 59.1 59.1 70.9

mm - - - - - 700 850 1000 1000 1500 1500 1800

Dimensions 900LB NPS 3˝x2˝ 4˝x3˝ 6˝x4˝ 8˝x6˝ 10˝x8˝ 12˝x10˝ 14˝x12˝ 16˝x12˝ 18˝x16˝ 20˝x16˝ 24˝x20˝

Bore in 1.87˝ 2.87˝ 3.87˝ 5.75˝ 7.5˝ 9.37˝ 11.12˝ 11.12˝ 14˝ 14˝ 17.5˝Size mm 47 73 98 146 191 234 282 282 356 356 445

Lin 15.1 18.1 24.1 29.1 33.1 38.1 40.9 44.9 48.5 52.5 61.0

mm 384 460 613 740 841 968 1038 1140 1232 1334 1549

H1in 15.7 19.7 21.7 25.6 - - - - - - -

mm 400 500 550 650 - - - - - - -

H2in - - - - 27.5 33.4 39.3 47.2 59.0 59.0 59.0

mm - - - - 700 850 1000 1200 1500 1500 1500

41

H

L

H2

L


• DHV Figure Numbers ·································································································· 2

• Floating Ball Valves ···································································································· 3

One-piece Body Ball Valves ····················································································· 3

Two-piece Body Ball Valves ···················································································· 5

Small Size Ball Valves ···························································································· 7

• Three Way Ball Valves ································································································ 10

• Trunnion Mounted Ball Valves ················································································· 11

Two-Piece Cast Steel Body Ball Valves ······································································ 12

Three-Piece Forged Steel Body Ball Valves ····························································· 19



One-piece Cast Steel Body Top Entry Ball Valves ················································ 30

• Fully Welded Ball Valves ·························································································· 36

• Rising Stem Ball Valves ··························································································· 39

• Terms & Conditions ·································································································· 42

Table of Contents

1

Introduction

Terms & Conditions

QuotationAll prices are F.O.B. shipping point unless otherwise agreed or specified in the quotation. Prices are valid

only for the duration indicated in the quotation and are subject to change without notice. Prices also do

not include any federal, state or local taxes or other government charges.

Design changesWe reserve the right to institute changes in material ,design and specification without notice.

Cancellation or changesOrders placed with us are not subject to cancellation or changes without our prior consent. A cancellation

charge or a price adjustment will be applicable unless otherwise agreed.

DeliveryWe will not be responsible for delays or failure to deliver due to causes beyond our control.Delivery of

material to a common carrier shall be considered delivery to the Buyer .Claims for loss or any damage to

material in transit shall be filed by the Buyer direct with the carrier. Claims for any shortage, corrections

or deductions must be made in writing within 10 days after receipt of goods.

Return of goodsAny return of goods will not be accepted without our prior authorization.Return goods should be of our

manufacture, in clean and salable condition. A minimum charge of 35 Percent of the invoice price will be

made to cover the cost of handling and reconditioning. The freight for return goods shall be prepaid by

Buyer.

Limited warrantyDHV Industries,Inc. warrants to the original Buyer, not any third party, for products of our manufacture,

for a period of one year after date of shipment, that its products will be free from defects in materials and

workmanship under proper and normal use.

Any claim for defect goods should be by written notice to DHV Industries,Inc. immediately upon discovery.

NO warranty shall apply to our product which has been modified or changed in design or function,

misused, or improperly maintained. DHV Industries,Inc.shall be able to inspect claimed defects at origi-

nal buyer’s facility to determine its obligation.Without authorization of DHV Industries,Inc. any repair

labor or material is not allowed. No goods may be returned without permission from DHV Industries,Inc.

This warranty does not extend beyond original sale price and does not extend to any claim for labor.

Consequential damages, losses,whether directly or indirectly suffered or in any other manner relating to

the defects.

42

Quality is our commitment, while competitive price and timely delivery is our promise.

From the beginning, the DHV name has become associated with quality in every step of our

manufacturing process. For the past decades our customers worldwide have trusted us to pro-

vide them with consistent and reliable valve products in their most severe and critical service.

We at DHV are proud of our ability to meet the stringent requirements of Refining, Gas/Oil, Pipeline,

Petrochemical and Power Plant.

DHV Ball Valves are designed, manufactured and tested to the latest manufacturing specifica-

tions of the American & International Standards Organizations. We welcome your challenges and

look forward to serving your critical project needs.

Ball Valves

Catalogue No: A2-05

DHV Industries, Inc.3451 Pegasus Driver Bakersfield. CA 93308 U.S.A.


Phone: (661) 392-8948 Fax: (661) 392-8947



DHV Valve Company Inc.10810 W. Little York, Suite 120 Houston, TX. 77041 U.S.A.

Phone: (713) 983-6046 Fax: (713) 983-9076



Seeking a Great Name in Valve Technology

Your local DHV agent

Please visit our DHV website: www.dhvindustries.com or www.dhvvalve.com for a copy of our API 6D

monogram certificate. Customer and Project referrals are available upon request. For certified data

and current specifications, please contact us or your local DHV agent. Information provided in this

catalog is for general purposes only.

DHV reserves the right to discontinue the manufacture or change and modify our design and construc-

tion of any DHV product, in due course of our manufacturing procedure without incurring any obligation

to accept for credit, to replace or furnish or install such changes or modifications on products previously

or subsequently sold.

DHV Industries, Inc.3451 Pegasus Drive

Bakersfield, CA 93308 U.S.A.


Phone: (661) 392-8948

Fax: (661) 392-8947



DHV Valve Company Inc.10810 W. Little York, Suite 120

Houston, TX. 77041 U.S.A.

Phone: (713) 983-6046

Fax: (713) 983-9076



ball valves - dhvvalvefoundry.com valve a2-05.pdf · 8 = small size ball valves 9 = top entry...

Documents