Utility FTTH / FTTB Network SolutionsFrom the substation to the customer premises, Charles enclosures provide fiber distribution, aggregation

and demarcation solutions at every step of the way in today’s optical networks. Charles offers a full range

of equipment and power cabinets; aerial or buried housings, closures and pedestals; and customer

premises terminals designed for rapid deployment, flexible fiber splicing, and pre-connectorized, loose

buffer tube or ribbon cable architectures.

MDU(AERIAL PLANT)

SUBSTATION(OUTDOOR) SUBSTATION

(CONTROL HOUSE / INDOOR) NEIGHBORHOOD #1(AERIAL PLANT)

NEIGHBORHOOD #2(BURIED PLANT – ABOVE GRADE)

NEIGHBORHOOD #3(BURIED PLANT – BELOW GRADE)

24

1

3

4

6

4

7 3

5

1

2

• CUBE OUTDOOR CABINETS• CPAD MOUNTING PADS

• CUBE INDOOR CABINETS• CFIT TERMINALS• CIBR BATTERY RACKS• CFRS FIBER RACK SOLUTIONS

• CFAS STRANDMOUNT ENCLOSURES*• FODC DOME ENCLOSURES• FSDC SEALED DROP CLOSURES

3

4

5

6

7• OHC OPTICAL HUB CABINETS• CPAD MOUNTING PADS• CFFP FIBER FLEXIBILITY PEDESTALS• CMPH HOUSINGS WITH FODC

• CBGE BELOW GRADE ENCLOSURES

• CFDP FIBER DISTRIBUTION PEDESTALS• BDO FIBER DISTRIBUTION PEDESTALS• LVP PEDESTAL WITH FSDC

CHARLES FIBER ENCLOSURE SOLUTIONS FOR VARIOUS NETWORK JUNCTION POINTS

• CFIT FIBER INTERCONNECT TERMINALS• CFIT-FLEX FIBER DEMARC ENCLOSURES• CFTT TRANSITION TERMINALS

BUSINESS / STRIP MALL(AERIAL PLANT)

7 3

4

4

3

*CFAS Enclosures support aerial applications only

6

Feeder

Distribution

Drop

3

3

57 3

Substation Outdoor Solutions

Substation Indoor Solutions

CUBE Single-Bay Equipment

& Battery Cabinets Padmount cabinets with front and rear

access doors support both active and

passive SCADA equipment with battery

backup. CUBE offer an economical,

properly thermal regulated solution for

Fiber to the Substation applications when

a substation does not have a control

house, or the existing control house is

space exhausted or not weather proofed.

CUBE ID6 Indoor CabinetsSupporting indoor communications

applications, CUBE ID Series enclosures

feature power, equipment and optional

battery compartments, and are direct air

cooled operation in indoor equipment

areas. They provide up to 18RU front or

36RU front and rear mounting space for

23” rack mount equipment, with SCADA

electronics. An optional battery

compartment supports one string of

batteries.

CIBR Power/Battery RacksCIBR style battery racks are proven

indoor perfomers. They are modular,

seismic Zone 4 rated and designed to fit

the footprint of Ni-Cd or VRLA batteries.

Multiple configurations, from 2 to 5

battery trays, are available with optional

integrated Power Plant kits. Each tray

includes a 100 amp breaker and alarm

safety features. Each rack can be

ordered with additional 19” or 23”

equipment rack mounting kits.

CUBE Multi-Bay Equipment

& Battery CabinetsModular cabinets create a multi-bay

solution for customers who desire active

and passive equipment to be placed in

separate chambers. Thermal manage-

ment options, battery back up chambers,

top hat and riser plinths are available to

best meet specific site placement needs,

Complete factory equipment integration

is available from Charles.

CFIT Fiber Hubs & TerminalsCFIT Hub Cabinets allow a utility to easily

terminate incoming fiber and use 1XN

splitter technology to broadcast services

to downstream customers. They can also

be used as an interconnect or splice

cabinet with up to 432 splices. CFIT are

constructed out of powder-coated

aluminum and offer superior environ-

mental protection in outdoor applications;

and may be wall, pole or H-frame mounted.

CFRS Fiber Panel Rack

SolutionsFlexible, multi-functional panels for

patch-only or patch and splice

requirements within virtually any

application. CFRS are available in

1, 2, and 4RU configurations,

providing up to 288 ports (LC) in 4RU.

A swing-out shelf design allows

technicians easy access to splice/

splitter trays, with the rear of the panel

open for cable ingress/egress.

CPAD Cabinet / Generator Mounting PadsCharles Composite Pads (CPAD) are economical alternatives

for poured in place and pre-cast concrete pads. They eliminate

on-site work, save time, and reduce injury risk associated with

handling and maneuvering heavy concrete. CPAD models are

available with factory cut-outs for Charles’ CUBE PM6 and SS

Series Cabinets, and OHC Fiber Hubs; or in universal models

for mounting any manufacturer’s cabinet.

Aerial Plant Solutions

FSDC Fiber Sealed

Drop ClosuresVersatile and easy-to-use fiber

access closures are full sealed

for strand, pole, or pedestal

mount applications. In addition

to an express main feed cable,

the closure can accommodate

up to two branch cables. FSDC

support up to 16 drops.

FSDC-H Drop Closures

for Hardened DropsThe front panel of the FSDC-H

has an 8-port hardened

adapter interface for simple

plug-and-play connection of

preconnectorized hardened

drop cables Closures may be

strand, pole or pedestal

mounted or placed in vaults..

CFAS Aerial Strandmount

Drop ClosuresThis lightweight strandmount

closure provides 12 plug-and-

play drop ports in its front

access panel, and 2 standard

hinged splice trays in its

secondary splicing compart-

ment. Supports loop-through,

branch and butt splicing.

Buried Plant - Above Grade Solutions

CFFP Fiber Flexibility

PedestalsCFFP offer a scalable, low

cost alternative to placing hub

cabinets in the outside plant.

Their compact size makes

them easy to install and best

suited to small communities

and neighborhoods. Four sizes

are available with up to 72, 96,

144 and 288 fiber counts.

CFDP & BDO Fiber

Distribution PedestalsFlexible fiber distribution

pedestals accommodate

loop-through and stub-out

distribution cable; ribbon and

loose buffer tube type cable;

branch and drop splices; and

fiber slack storage. Four

diameters support 6-24 cable

drops per pedestal.

CFDP & BDO

Connectorized Fiber

Distribution PedestalsFiber Distribution pedestals

equipped with SC connector

bulkhead terminal panels

provide easy drop connections

and test access points.

Available in CFDP (inner and

outer dome) and BDO (outer

dome only) configurations.

LVP106 Pedestal with

mounted FSDCThe louvered LVP106 pedestal

offers a convenient above-

ground storage solution for

Charles’ Fiber Sealed Drop

Closure (FSDC). Technicians

can easily access the FSDC

at ground level for service

turn-up. All required bracketry

is included for quick mounting.

OHC Optical Hub

CabinetsHigh capacity fiber distribution

hubs for passive optical

networks support fusion,

pre-terminated and field

terminated feed and drop

fibers. Four cabinet sizes

support 288, 432, 576 and 864

drops respectively with front

and rear access doors to

feed and drop sides.

CMPH Multi-Purpose

HousingsVersatile housings designed

for large-volume storage

needs, including sealed fiber

splice closures with plenty of

room for cable slack storage.

One-piece lift-off dome allows

technicians ample room for

entry of multiple large cables,

including conduit. Lightweight

housings are easy to place.

FODC Fiber Optic

Dome ClosuresButt-end fiber splice closure

is mechanical compression

sealed for strand or pole

mount applications. Two sizes

provide 144 or 288 splice

capacity respectfully. Many

different cable ingress/egress

grommet options are available.

CFIT Fiber Interconnect

TerminalsFlexible outdoor aggregation/

demarcation enclosures for grow-as-

you-go scalability at multi-user sites

with up to 432 fiber splices. Fiber

Hub configurations are also

available.

CFIT-Flex Fiber Demarcation

EnclosuresCompact, non-metallic enclosures

available in two sizes for up to 24

(compact) or 72 (standard) drops

with optional swing out bulkheads

and interchangeable port plates.

Hub configurations also available.

CFTT Fiber Transition

TerminalsCFTT serve as customer

demarcation points for fiber entering

the premises and slack fiber storage

terminals 4 and 8 port models with

hinged splice trays and fiber bend

control guides keep fiber organized.

D-OSP195-B20

Dependable Solutions, Superior Support• Field-proven and unequaled 24-hour technical support

• Individualized application consultation

• Superior quality (ISO 9001/TL 9000 registered)

Visit our website at http://www.charlesindustries.comCharles Industries, LLC

An Amphenol Company

Voice: (847) 806-6300

Fax: (847) 806-6231

E-mail: mktserv@charlesindustries.com

is a registered trademark of Charles Industries, LLC

INNOVATIVE ENCLOSED SOLUTIONS™

MADE IN THE

Buried Plant - Below Grade Solutions

FODC Fiber Optic

Dome ClosuresButt-end fiber splice closure is

mechanical compression sealed

for use in underground vaults and

handholes. Two sizes provide 144

or 288 splice capacity respectfully.

Many different cable ingress/egress

grommet options are available.

CBGE Below Grade

EnclosuresHDPE material handholes are

lightweight for easy handling and

installation. 7 tapered rectangular

sizes are available. Ideal for storing

sealed fiber splice closures below

ground, including Charles FODC

and FSDC closures.

FSDC Fiber Sealed Drop

ClosuresVersatile and easy-to-use fiber

access closures are full sealed for

use in underground vaults and

handholes. In addition to an express

main feed cable, the closure can

accommodate up to two branch

cables. It supports up to 16 drops.

Customer Premises / Fiber Demarcation Solutions