user-guide 4 bugaboo-bee r01 en z80061uk

8/15/2019 User-guide 4 Bugaboo-bee r01 en z80061uk

1/46


2/46

1

en

© Copyright 2007 Z80061 rv01 Bugaboo® International BV. The information contained herein is subject to change

without notice. Bugaboo® International BV shall not be liable for technical errors or omissions contained herein.

The purchased product may differ from the product as described in this user guide. Our most recent user guides

can be requested at our Service departments (see ‘and finally …’) or at www.bugaboo.com.

IMPORTANT: KEEP FOR FUTURE REFERENCE

english


3/46

2

TM ® BUGABOO and the Bugaboo logos, FROG, GECKO, CAMELEON

and BEE are registered, pending or claimed trademarks of Bugaboo.The Bugaboo pushchairs are patented. The Bugaboo pushchairs'

models are protected.

in the box

Take a minute to check the

contents of your package.

You should find:

• Bugaboo Bee chassis with seat unit attached

• 2 swivel wheels• rain cover

• user guide

• warranty card

If anything is missing, please contact your retailer.

The Bugaboo Bee is so simple

and easy to use; it won’t take

long to master.

We have provided a straightforward guide to

make sure you and your child get the most out ofyour Bugaboo experience. Please read it carefully

before you use the Bugaboo Bee and keep it for

future reference.

Your child’s safety may be affected if you do not

follow these instructions.

in your guide

WARNINGKeep plastic and waterproof

packaging materials away from

babies and children to preventsuffocation.


4/46

3

en

hello

At Bugaboo, we have helped thousands of parents

and youngsters discover their world afresh with the

help of our cutting-edge technology, our passion for

stylish design and our commitment to your freedom.

Our aim is to create a safe and comfortable

journey, to help make the big wide world

accessible. So we’ve made the Bugaboo Bee

ever adaptable, boasting features that are easily

adjustable to a child’s development.

For smaller infants, the Bugaboo baby nest is just

one of the accessories available, to help to ensure

your baby’s comfort.

As you child grows, the Bugaboo Bee’s turning seat

allows them to face you or face the world.

When your child gets the urge to do a spot oftoddling, the Bugaboo Bee easily folds, revealing

a comfortable carry handle.

Above all, the Bugaboo Bee was designed to be

compact, nimble and easy to use. Be spontaneous

- use it all the time. The Bugaboo Bee is suitable

from birth and designed to accommodate your childfrom infant to toddler (up to a weight of 17 kg/37.5 lbs).

Please complete the warranty card. If you need

to get in touch with us, it makes things easier and

ensures you get the best service from Bugaboo.

The model and serial number of your Bugaboo Bee

are on the chassis. These will be needed for yourwarranty registration.

The Bugaboo Bee buggy complies with standard

BS 7409: 1996. All fabric complies with Furniture and

Furnishings Fire Safety Regulations.

Welcome to modern mobility, and thank you for buying the Bugaboo Bee.


5/46

the beginning20 adjusting the seat

21 adjusting the backrest

22 adjusting the harness

25 adjusting the sun canopy

3

get going

11 assemble your bugaboo bee

12 unfold - facing the world

14 unfold - facing you

16 fold - facing the world

18 fold - facing you19 brake

2

4 the perfect fit26 adjusting the handlebar

27 using the wrist strap

28 locking the wheels

29 turning the seat unit

welcome

6 meet the bugaboo bee

8 warnings

1

4


6/46

en

contents

taking care

37 important information

38 maintenance tips

38 cleaning

39 removing the sun canopy

40 removing the seat cover

41 storing the bugaboo bee

6

exploring

34 attaching the raincover

36 removing the underseat basket

5

7 don’t go yet42 replaceable parts

42 accessories

43 and finally...44 warranty

5

en


7/46

folding lock

underseat basket

sun canopy

harness

footrest

backrest

seat

handlebar

wrist strap

1 w e l c o m e

knee caps

wheel locks

meet the bugaboo bee

seat adjustment lock

All the white parts of your

Bugaboo Bee are moveable.

They’re the bits that allow youto adapt and change your

Bugaboo Bee.

swivel wheelrelease button

6

welcomemeet the bugaboo bee


8/46

en

b o o

b u

g a

b e e

1

backrest

adjustment lock

carry handle

harness toggles

arm release button

handlebaradjustment clips

brake seat unit release lock

swivel wheels

bugaboo label

7

en


9/46

8

WARNINGS

It is crucial that you read and refer to all warnings listed in this section

and throughout the guide. These are all relevant and essential for the

care and safety of any child when using the Bugaboo Bee.

If something isn’t clear, please visit us at www.bugaboo.com.

• Do not assemble or use the

Bugaboo Bee until you have read

the user guide.• Additional warnings and safety

information appear in the assembly,

use and accessory sections of this user

guide as well as on the Bugaboo Bee

itself. These should be reviewed

independently.

• Ensure that all the locking devices are

engaged before use.

• The wrist strap must be worn at all times.

• Check that the pram body or seat unit

attachment devices are correctly

engaged before use.• The Bugaboo Bee is suitable from birth

and designed to accommodate your

child from infant to toddler (from 0 to 4

years and up to a weight of 17 kg).

Excessive weight may cause a

hazardous unstable condition to exist.

The product will become unstable if the

manufacturer’s recommended load is

exceeded.

• Do not carry more than one child in the

Bugaboo Bee.

w e l c o m e

1


10/46

9

en

• Always use the safety features of your

Bugaboo Bee, including locking devices,

brake, the harness (when child is in the

seat) and the wrist strap attached to the

handlebar (see this user guide for

additional information). Check andmaintain all safety features frequently.

• Children should be harnessed in at

all times.

• For any child unable to maintain an

unaided sitting position the backrestshould only be used in the most

reclined position.

• When adjusting the Bugaboo Bee,

the child should be clear of moving

parts while making adjustments.

• A child’s safety is your responsibility.

A child should never be left unattended.

• Any load attached to the handlebar

affects the stability of the pushchair.

•

Take your child out of the Bugaboo Beewhen going up or down stairs, escalators

or around steep or unstable conditions.

Also, take extra care when going up or

down a curb or other uneven surfaces.

• Do not allow the Bugaboo Bee to be

used as a toy.

• Do not run, jog or skate with the

Bugaboo Bee.

w e l c o m e

1


11/46

10

w e l c o m e

• Only use authentic Bugaboo

replacement parts and Bugaboo

accessories or products approved by

Bugaboo for use with the Bugaboo

Bee. It is unsafe to use products that

are not approved by Bugaboo.• Always use the crotch strap in

combination with the waist belt.

• This vehicle requires regular

maintenance by the user.

• The warranty does not cover damage

to the Bugaboo Cameleon caused by

overloading, incorrect folding or the

use of non-original accessories.

1 WARNINGS


12/46

11

en

g e t g o i n g

2

Your Bugaboo Bee comes almost ready to go. All you need to do is

attach the swivel wheels. It’s quick and simple.Slot each swivel wheel onto the connection

rod at each end of each of the Bugaboo Bee’s

front legs. Push firmly until they click

into place.

If you need to remove the swivel wheels,

press the black button above each wheel

and pull it away from the Bugaboo Bee.

assemble your bugaboo bee

1

1

get going


13/46

12

2 g e t g o i n g

1

unfold - facing the world

Opening the Bugaboo Bee is easy.

Make sure that the handlebar clips are

closed. Then simply lift the handlebar to

the standing position and put your foot

on the brake pedal.

WARNINGIn order to be sure that the folding

mechanism is in its proper position,

at least one of the following must

be confirmed:

1. audible ‘clicks’ heard on both sides

2. red indicators on the sides of the

handlebar not visible any more

3. green spots on top of the handlebar

completely visible.

brake pedal


14/46

13

en

2 g e t g o i n g

Push firmly on the brake with your foot

while pulling the handlebar to fully open

the Bugaboo Bee.

If the chassis has securely clicked into place,

the red indicators on the handlebar's sides

will have disappeared and the green

indicators on the handlebar will be

completely visible.

2 Once the Bugaboo Bee is fully open,click the seat into place.

3

‘click’‘click’


15/46

14

2 g e t g o i n g unfold - facing you

1 Opening the Bugaboo Bee is easy.Make sure that the handlebar clips are

closed. Then simply lift the handlebar tothe standing position and put your foot

on the brake pedal.

brake pedal

WARNINGIn order to be sure that the folding

mechanism is in its proper position,

at least one of the following must

be confirmed:

1. audible ‘clicks’ heard on both sides

2. red indicators on the sides of the

handlebar not visible any more

3. green spots on top of the handlebar

completely visible.


16/46

15

en

2 g e t g o i n g

2 When fully open, place the backrest in yourdesired position.

Click the seat into place. If the seat is pushedunderneath the seat supports while

unfolding, you will need to pull it firmly

upwards so it rests on top of the supports.

3Push firmly on the brake with your footwhile pulling the handlebar to fully open

the Bugaboo Bee.

If the chassis has securely clicked into place,

the red indicators on the handlebar's sides

will have disappeared and the green

indicators on the handlebar will be

completely visible.

‘click’


17/46

16

fold – facing the world

Folding the Bugaboo Bee is easy; the internal spring relieves

any effort. The instructions below show you how to do fold the

Bugaboo Bee when the seat is facing the world.

WARNING Care must be taken when folding and

unfolding the Bugaboo Bee to prevent

fingers from being trapped.

1

2

2 g e t g o i n g

Apply the brake by pushing firmly

down on the pedal.

Adjust the backrest so that it is parallel

with the handlebar.

3 Press the secondary lock on the handlebardown while lifting the folding locks upwards.

This will release the folding mechanism

and the Bugaboo Bee will do the hard

work for you.


18/46

17

en

2 g e t g o i n g

3


19/46

18

fold – facing you

These instructions show you how to do

fold the Bugaboo Bee when the seat is

facing towards you.

1

2 g e t g o i n g

backrest adjustment lock

Apply the brake by pushing firmly

on the pedal.

Slide the secondarylock to the right while

you pull the backrest adjustment lock all the

way upwards. This will allow you to move

the backrest all the way forward so it is in

line with the handlebar.

Hold the secondary lock on the

handlebar down while lifting the folding

locks upwards. This will release the folding

mechanism and the Bugaboo Bee will do

the hard work for you (see page 16 and 17).

2

3

2


20/46

19

en

2 g e t g o i n gbrake

To release the brake, push the upper part

of the brake pedal downwards. To apply the

brake, firmly press the lower part of the pedal

downwards, but don’t force it.

WARNING The brake is a parking brake only.

Apply the brake whenever you park

the Bugaboo Bee.

Do not apply the parking brake while theBugaboo Bee is moving. Only apply the

parking brake when the Bugaboo Bee

is stationary. The brake pedal must be

in its lowest position to lock.

Always apply the brake when

positioning or taking out the child.


21/46

20

3 t h e b e g i n n i n g

the beginning

We appreciate that children come in all shapes and sizes, and develop

at different rates. So the Bugaboo Bee is easily adaptable.

While pressing the lock on the underside of

the seat, slide the seat to the correct length

to fit your child’s legs.

adjusting the seat

1

seat adjustment lock


22/46

21

en


Whatever the age of your child, there’s a posture that’s just right for them.

On the back of the Bugaboo backrest is an

adjustment lock. To release the backrest

you’ll need to squeeze the lock while you

change the position. The Bugaboo Bee has

four positions, from upright to reclining,

to suit your child’s mood or activity.

adjusting the backrest

1 2

backrest

adjustment lock

WARNINGFor any child unable to maintain an

unaided sitting position the backrest

should only be used in the most

reclined position.

1

Once you have positioned the backrest,

let go of the release lock to secure.


23/46

22


It is essential for both comfort and safety that the

harness is always a snug fit.

to adjust the shoulder height of

the harness:

The straps should attach to the backrest, level with

the top of a child’s shoulders or slightly higher.

adjusting the harness

Pull the white harness toggles away from

the backrest by pushing the clips that hold

them in place at the front of the backrest.

Twist the toggles so they feed through

the holes.

Reinsert the toggles at the preferred height

and click them into place to secure.

1

2

3

2

1

WARNING The harness must be adjusted to fit your

child and must be properly secured.


24/46

23

en


to secure the harness:

Place the crotch strap between your

child’s legs.

Place your child’s arms through the

body straps.

Insert the clips on the body straps into themain buckle on the crotch strap and click

into place.

Squeeze the clips to release.

1

2

WARNINGAvoid being caught off-guard by your

child making unexpected movements.

Always use the crotch strap in

combination with the waist belt.

3

4

1

3

2


25/46

24

3 t

h e b e g i n n i n g

Use the sliders. You should be able

to comfortably insert two fingers under

each strap.

to adjust the shoulder and

crotch straps:

1

WARNING Always use the harness to avoid

serious injury from falling or sliding out.

to adjust the waist straps:

The harness has indicators (I and II) to help

you get the right tightness for your child’s

size. For a smaller child, the ‘I’ setting on

the waist strap will ensure a snug fit. As the

child grows bigger, slide the strap alongto the ‘II’ setting. Position the number in the

middle of the slider.

1


26/46

25

en

3 t

h e b e g i n n i n g

1

The Bugaboo Bee comes with an adjustable sun

canopy allowing privacy while your child has

a well-deserved nap, or offering protection on

sunny or windy days.

NOTE The sun canopy will fit the Bugaboo Bee

for a child with a maximum bottom-to-head length

of 51 cm/20.1 inches.

To adjust the sun canopy, pull at the wire

frame. There are three positions: closed (1),

halfway open (2) or fully open (3).

32

adjusting the sun canopy

Children are so excitable; one moment they’re up and active,

the next they’re tired and irritable.

WARNING Children have very sensitive skin. Never

put a child in the Bugaboo Bee in direct

sunlight without fitting the sun canopy.

1


27/46

26

4 t h e p e r f e c t fi t

adjusting the handlebar

The Bugaboo Bee wasn’t designed just for your baby’s comfort,

but yours too. The handlebar is adjustable so it’s the right height,

for whoever is pushing.

Open the clips on both sides of

the handlebar.

Adjust the handlebar to your preferred

height by pulling up or pushing down.

Fasten the clips to secure in place.

1

2

3

1

the perfect fit


28/46

27

en


using the wrist strap

The wrist strap must be worn at all times, but especially

on uncertain or rugged terrain and on an incline.

Check the safety warnings,

which are printed on the wrist strap.


29/46

28


Gravel or uneven surfaces can be tough to travel over with swivel wheels,

especially when pushing the Bugaboo Bee with heavy shopping in the

underseat basket. To help relieve this problem the Bugaboo Bee’s front

wheels can be locked.

locking the wheels

Line up the swivel wheels so that the

kneecaps are facing forwards.

Above each of the Bugaboo Bee’s front

kneecaps is a white wheel lock. Squeezeeach one and slide it upwards until they

click. This will lock the wheels and they will

no longer swivel.

To unlock, squeeze and slide the wheel

locks down.

1

2

2


30/46

29

en


turning the seat unit

You know what makes your child happy - either facing you or watching

the world go by. You can turn the seat to suit their mood.

Apply the brake by pushing firmly down

on the pedal.

Using the adjustment lock on the back

of the backrest, place the backrest in its

fully reclined position (see adjusting thebackrest on page 21).

NOTE Even if the seat unit of your Bugaboo Bee

is facing you to begin with (rather than facing the

world as shown in the illustrations) the instructions

given to turn the seat unit are the same.

WARNINGThe seat is not intended to be used

as a carry seat or for any purpose

other than in conjunction with the

Bugaboo Bee chassis.

1

2


31/46

30


Push in the arm release buttons and free

one arm at a time by lifting them.3 4

4

arm release button

Fold the seat to the backrest until it clicks

into place.


32/46

31

en


Squeeze the seat unit release lock which is

near the base of the backrest and gently lift

the seat unit away.

6Move the seat unit forward.5

6

seat unit release lock


33/46

32


7

WARNINGDo not remove the seat unit from the

chassis while your child is in the seat unit.

8Turn the seat unit around and slide the pinsinto the runners on the inside of the frame.

Press the seat unit onto the frame until you

hear a ‘click’ on both sides.

When the seat is securely in place the red

indicators on the seat unit release lock will

not be visible. Double check the seat unit is

attached to the chassis by gently tugging

the seat unit.

8

7


34/46

33

en


10 Click the seat in place and adjust thebackrest to a suitable position (see adjusting

the seat on page 20 and adjusting the

backrest on page 21).

Push in the arm release button and reattach

each arm by inserting the end into the socket.

If the arms do not reach the sockets, squeeze

the backrest adjustment lock and slot each

one into the correct position.

9

9


35/46

34

5 e

x p l o r e r i n g

attaching the rain cover

Come rain or shine, the Bugaboo Bee can protect a child in any

setting. The snug-fitting and fully ventilated rain cover is sure to keep

the child dry, warm and comfortable.

Fully extend the Bugaboo Bee sun canopy.

Place the rain cover on the head-end of

the backrest.

Pull the rain cover over the sun canopy so

that the Bugaboo label on the rain cover

lines up with the Bugaboo label on the

Bugaboo Bee. It should fit snugly.

The rain cover has an elastic loop and ahook on each side. Fasten these together

around the Bugaboo Bee chassis to secure

the rain cover in place.

Attach the touch fasteners around the chassis

just above the wheels for extra security.

NOTE The rain cover will fit the Bugaboo Bee for

a child with a maximum bottom-to-head length

of 51cm/20.1 inches.

Adjust the touch fastener in the middle of

the rain cover to adapt the cover to the

chosen seat position.

By attaching the touch fasteners you create

an air vent.

1

2

3

4

5

6

7

exploring


36/46

35

en

5 e

x p l o r e r i n g

64

air vent

touch fastener

5

WARNING To prevent your child from overheating,

do not leave them under the rain cover

if it is not raining. Ensure that there is

proper ventilation by using the air vent.

5


37/46

36

5 e

x p l o r e r i n g

removing the underseat basket

If you’re going out on an adventure, you may not want to take

the underseat basket with you.

to remove the underseat basket:

Undo the touch fasteners along the sides

of the net.

Unhook the touch fasteners at both ends

of the net. The Bugaboo Bee is now free

from the net.

to reattach the underseat basket:

Make sure that the fabric label is positioned

at the side of the footrest of the Bugaboo Bee.

Secure the touch fasteners along the sides

of the Bugaboo Bee.

Feed the touch fasteners through the holes

on both ends.3

1

2 2

2

1

WARNING The underseat basket is made to carry

a maximum weight of 4 kg (8.8 lbs).

Exceeding this amount may create an

unstable and hazardous condition.

1

6


38/46

37

en

6 t a

k i n g c a r e

taking careimportant information

• Check the safety of the Bugaboo Bee before

each use. Ensure that the seat fabric, the brake

and the safety belts are all working properly,

the handlebar is locked and that the seat is fitted

correctly to the chassis.

• Check to see if the Bugaboo Bee is damaged.

You should ensure that any damaged or worn

parts are repaired immediately (see warnings

on pages 8-10).

• To ensure complete safety for your child do not

use the Bugaboo Bee until any damaged or worn

parts have been repaired or replaced.

• The Bugaboo Bee seat unit (no. 580200) should

only be used with the Bugaboo Bee chassis

(no. 50100). Do not use Bugaboo Bee parts orcomponents with any non-approved pushchair,

other device or any other Bugaboo product.

• Do not use the Bugaboo Bee near open flames

or other sources of heat. Avoid exposing the

Bugaboo Bee to extreme temperatures.

• The Bugaboo Bee is not resistant to saltwater.

6


39/46

38

6 t a

k i n g c a r e

cleaning

After a few tough months on the

streets the Bugaboo Bee may

begin to get a bit grubby.

We’ve made the Bugaboo Bee fabric detachable and

machine washable. When washing, don’t forget:

• maximum temperature 30oC/85oF (cold wash)

• do not use bleach

• do not tumble dry

• do not iron

• do not dry clean

maintenance tips

• Clean the Bugaboo Bee chassis and wheels with

a soft towel and lukewarm water.

• Use a soft brush to clean sand from themechanisms and sliding tubes of the frame.

• Use silicon spray in the mechanisms of the backrest

release/adjustment and brakes to ensure that the

parts remain in good working order.

6


40/46

39

en

removing the sun canopy

to remove the sun canopy:

You may find it easier to remove the seat unitbefore removing and reattaching the sun canopy.

See turning the seat unit on page 29 for

instructions on how to do this.

Undo the eight buttons around the edge

of the backrest.

Unhook the three sets of elastic loops

found both sides of the Bugaboo Bee.

Pull the sun canopy, with the metal wire

frame still attached, away from the

Bugaboo Bee.

To wash the sun canopy, slide the metal

wire frame out of the sun canopy

(see cleaning on page 38).

4

1

2

3

6 t a

k i n g c a r e

to reattach the sun canopy:

To ensure that the bend on the wire is facingthe correct direction, each wire has a marking

on one end. Feed the wire through the sun

canopy, marking end first, starting on the

side with the Bugaboo label.

Reattach the metal wire frame to the

Bugaboo Bee chassis.

Hook the three sets of elastic loops to

both sides of the seat.

Fasten the sun canopy over the eight

buttons on the backrest.

4

1

2

3

1 3

6


41/46

40

6 t a

k i n g c a r e

Remove the sun canopy (see removing thesun canopy on page 39).

Remove the shoulder straps of the harness

(see harness on page 22).

Undo the seat cover from the eight buttons

around the edge of the backrest and

release the elastic loops from their clips

underneath the seat.

Unhook the two sets of elastic loops on

the backrest and the seat.

Feed the harness through the holes on the

seat cover to completely remove the coverfrom the Bugaboo Bee.

removing the seat cover

4

1

2

3

to remove the seat cover:

3

45

6


42/46

41

en

6 t a

k i n g c a r e

storing the bugaboo bee

Don’t store the Bugaboo Bee in direct sunlight or

when it’s wet as this may discolour or damage it.

Slide the seat cover over the seat.

Pull the harness through the seat cover holes.

Fasten the seat cover over the eight buttons

on the backrest.

Reattach the two sets of elastic loops to the

seat and backrest.

Attach the sun canopy as before.

WARNING Ensure that the seat cover is securely

fastened at all points before use.

4

1

2

3

5

to reattach the seat cover:

7


43/46

42

7 d o n’ t g o y e t

don’t go yet

We pride ourselves on high quality and high

standards. That’s why only genuine Bugaboo

parts should ever be used on the Bugaboo Bee,

or parts that have been approved by Bugaboo.

Visit www.bugaboo.com for an extensive list

of your nearest suppliers.

replaceable parts

We've thought of everything when

it comes to accessories:

baby nest Especially designed to provide extra comfort for

the really little ones.

breezy canopyTo provide extra ventilation.

car seat adapters To attach a car seat to the Bugaboo Bee to keep

you and your child truly mobile.

cup holder An accessible place to store a drink, so you

and your child stay hydrated while enjoying

your adventure.

diaper bag A wearable necessity to hold all the essentials.

footmuff To help keep your child’s toes toasty on colder days.

accessories

WARNINGOnly use authentic Bugaboo

replacement parts and Bugaboo

accessories or products approved byBugaboo for use with the Bugaboo Bee.

It is unsafe to use products that are not

approved by Bugaboo.

7


44/46

43

en


parasol Finding shade on sunny days can be a problem,

but with the parasol in place shade is instantly created.

sunshade Helps to protect young, sensitive skin from harmful

UV rays. It also protects from all sorts of flying bugs.

transport bag For long trips, nothing could be more useful than

a bag to store and protect the Bugaboo Bee.

wheeled board The wheeled board is a fun place for your older

child to stretch their legs without getting tired.

Find your nearest retailer by visiting

www.bugaboo.com.

Once you have mastered the Bugaboo Bee,

make sure you have the most up-to-date

information by filling in your warranty card and

sending it to us or, even easier, complete it online

at www.bugaboo.com.

We’d like to hear your comments on the

Bugaboo Bee. Please write to us at:

Bugaboo Service

Postbus 12991000 BG Amsterdam

The Netherlands

You can also send an e-mail to

[email protected] or visit our

website at www.bugaboo.com.

and finally...

7


45/46

44


warranty

As the manufacturer, Bugaboo International BV , which has its

principal place of business in Amsterdam (hereinafter: “Bugaboo”)

supplies the [Bugaboo Bee] (hereinafter: “product”) under warranty,

subject to the following conditions:

1. The warranty period is 24 months, from the date of purchase.

The warranty period shall never be extended, even in the event of

repairs being made.

2. This guarantee is valid all over the world, except in the United

States of America and Canada.

3. The warranty provides a right to repair and specifically not to a

product’s exchange or return.

4. Bugaboo shall bear the expense and risk of transport from and tothe retailer (hereinafter: “the retailer”) where you purchased the

product, provided the repair is covered by warranty.

5. The warranty may only be invoked if you provide Bugaboo with

the following, along with the defective product:

- a copy of the dated receipt of purchase, and

- a clear description of the complaints.

6. The warranty is not transferable and may therefore only be

invoked by the first owner.

7. The warranty does not affect any statutory rights you may have,for example the right to hold the retailer accountable for defects.

no warranty will be provided in the following circumstances:

- If you have made or arranged for modifications or repairs to be

made without written permission first having been received from

Bugaboo or the retailer.

- Defects resulting from neglect or an accident and/or from any use

or maintenance other than that indicated in the user guide.

- If the serial number has been damaged or removed.

- Damage to the product caused by normal wear.

important

The product is covered by a 24-month warranty from the date of

purchase. In the event of a defect, you are requested to first contact

your retailer. If the retailer is unable to repair the defect, you cancontact Bugaboo. Keep the user guide and purchase receipt in a

safe place.


46/46

user-guide 4 bugaboo-bee r01 en z80061uk

Documents