us dollar and euro pricing is available online - paintline ltdpaintlineltd.com/pdf/painttest.pdf ·...

Paint Test Equipment

2014 Sterling Price List US Dollar and Euro pricing is available online

Coating Thickness Porosity Adhesion Inspection Kit Surface Profile Surface Cleanliness Climatic Conditions Gloss

Coating Thickness

Coating Thickness Meter

2

Tricomb Wet Film Gauge 3

Porosity

Holiday Detector

4

Pinhole Detector 5

Adhesion

Adhesion Tester

6

Cross Hatch Cutter 7

Inspection Kit

Paint Inspection Kit

8

Surface Profile

Testex Tape

10

Surface Roughness Comparator 10

Surface Cleanliness

Bresle Test

11

Dust Test 11

Rust Grade Book 11

Climatic Conditions

Dewpoint Meter

12

Gloss

Gloss Meter

13

1

Product Index


Coating Thickness Meter

ISO 2808: Paints and varnishes. Determination of film thickness.

ISO 19840: Corrosion protection of steel structures by protective paint systems. Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces.

ISO 2360: Non-conductive coatings on non-magnetic electrically conductive basis materials. Measurement of coating thickness. Amplitude-sensitive eddy-current method.

ISO 1461: Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods.

ISO 2063: Thermal spraying. Metallic and other inorganic coatings. Zinc, aluminium and their alloys.

C5001 Coating Thickness Meter. Includes Ferrous Probe 0–1000µm £495.00

C5002 Coating Thickness Meter. Includes Ferrous Probe 0–2000µm & 0-5.00mm £595.00

C5003 Coating Thickness Meter. Includes Ferrous Probe 1–20.0mm £695.00

C5004 Coating Thickness Meter. Includes Non-Ferrous Probe 0–1000µm £595.00

C5005 Coating Thickness Meter. Includes Non-Ferrous Probe 0–2000µm £695.00

C5006 Coating Thickness Meter. Includes Ferrous & Non-Ferrous Probes 0–1000µm £795.00

C5007 Coating Thickness Meter. Includes Ferrous Probe 0–2000µm/0–5.00mm & Non-Ferrous Probe 0-2000µm £995.00

CA101 PC Download Cable £45.00

NC101 Ferrous Probe Calibration Certificate £25.00

NC102 Non Ferrous Probe Calibration Certificate £25.00

NC002 Calibration Foils Calibration Certificate £25.00

Coating Thickness Meter Spare Probes

CS301 Spare Ferrous Probe 0–1000µm (to fit Coating Thickness Meters C5001 & C5006) £195.00

CS302 Spare Ferrous Probe 0–2000µm & 5.00mm (to fit Coating Thickness Meters C5002 & C5007) £295.00

CS303 Spare Ferrous Probe 1–20.0mm (to fit Coating Thickness Meter C5003) £395.00

CS304 Spare Non Ferrous Probe 0–1000µm (to fit Coating Thickness Meters C5004 & C5006) £295.00

CS305 Spare Non Ferrous Probe 0–2000µm (to fit Coating Thickness Meters C5005 & C5007) £395.00

CA201 Ferrous Probe Right Angle 0–1000µm (to fit Coating Thickness Meters C5001 & C5006) £295.00

CA202 Non Ferrous Probe Right Angle 0–1000µm (to fit Coating Thickness Meters C5004 & C5006) £395.00


NC102 Non Ferrous Probe Calibration Certificate £25.00

2

Coating Thickness Meter Calibration Foils

F2001 Spare Calibration Foils 0–1000µm (25, 50, 75, 125, 175, 250, 500, 750µm) £45.00

F2002 Spare Calibration Foils 0–40mils (1, 2, 3, 5, 7, 10, 20, 30mils) £45.00



F2005 Spare Calibration Foils 0–5.00mm (50, 250, 500, 750, 1000, 1500, 2000, 3000µm) £45.00


F2007 Spare Calibration Foils 1–20.0mm (5, 9.5, 15mm) £45.00

F2008 Spare Calibration Foils 1–800mils (200, 360, 600mils) £45.00

FV001 Calibration Foils Special Range. Select 8 values from the following: 12, 25, 37, 50, 63, 75, 100, 125, 150,

175, 190, 200, 225, 250, 275, 300, 350, 375, 500, 625, 750, 1000, 1250, 1500, 2000, 3000µm (also

available in mils on request)

£45.00


Z1003 Spare Zero Disk Ferrous £25.00

Z1004 Spare Zero Disk Non-Ferrous £25.00

Z1005 Spare Zero Plate Ferrous (1–20mm Coating Thickness Meter) £25.00

Tricomb Wet Film Gauge

ISO 2808. Paints and varnishes. Determination of film thickness.

W2001 Tricomb Stainless Steel Wet Film Gauge 25–1500µm (1–59mils) £45.00

W1003 Tricomb Stainless Steel Wet Film Gauge 50–5000µm (2–200mils) £50.00

W2008 Tricomb Plastic Wet Film Gauge 50–900µm/2–36mils (pack of 200) £25.00

NWC01 Tricomb Stainless Conformance Certificate £5.00

3

Holitech Holiday Detector

ISO 29601: Paints and varnishes. Corrosion protection by protective paint systems. Assessment of porosity in a dry film.

ISO 2746: Vitreous and porcelain enamels. Enamelled articles for service under highly corrosive conditions. High voltage test.

S4001 Holitech DC Holiday Detector 0.5-6Kv £1095.00

S4002 Holitech DC Holiday Detector 1-20Kv £1195.00

S4003 Holitech DC Holiday Detector 1-30Kv £1295.00

NS001 Holitech Calibration Certificate £25.00

Holitech Holiday Detector Accessories

SA002 Extension Rod 500mm (20”) £45.00


SA502 Broad Brush 200mm (8”) £75.00

SA503 Broad Brush 500mm (20”) £95.00

SA302 Circular Brush & Assembly 2” (51mm) £65.00







SA404 Rolling Spring 4” (102mm) £30.00














SA490 Rolling Spring Connector Assembly £45.00

4


Holitech Holiday Detector Spares

SS003 Spare Earth Cable 10m £45.00

SS001 Spare Band Brush Probe £45.00

SS002 Spare Holitech High Voltage Handle £195.00

Pinhole Detector

ISO 29601: Paints and varnishes. Corrosion protection by protective paint systems. Assessment of porosity in a dry film.

ISO 8289: Vitreous and porcelain enamels. Low voltage test for detecting and locating defects.

S3002 Pinhole Detector 9V/67.5V/90V £395.00

NS002 Pinhole Detector Certificate £25.00

Pinhole Detector Accessories and Spares



SA601 Circular Sponge & Assembly 2” (51mm) £45.00

SA602 Circular Sponge & Assembly 4” (102mm) £45.00

SS004 Spare Earth Cable 5m £45.00

SS005 Spare Sponge Assembly £45.00

5

Adhesion Tester

ISO 4624: Paints and varnishes. Pull-off test for adhesion.

ISO 16276-1: Corrosion protection of steel structures by protective paint systems. Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating. Part 1: Pull-off testing.

X1003 Adhesion Tester (Standard) 0-3500psi (0-25MPa) £1195.00

X1004 Adhesion Tester (Right angle) 0-3500psi (0-25MPa) £1295.00

NX001 Adhesion Tester Calibration Certificate £25.00

Adhesion Tester Accessories and Spares

XA201 Concave Dolly 2” (51mm) £25.00














XA215 Convex Dolly 6” (152mm) £25.00











XS101 Spare Flat Dolly £20.00

XS102 Spare Adhesive £25.00

XS103 Spare Dolly Plug £5.00

6


Cross Hatch Cutter

ISO 2409: Paints and varnishes. Cross-cut test.

ISO 16276-2: Corrosion protection of steel structures by protective paint systems. Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating. Part 2: Cross-cut testing and X-cut testing.

X2001 Cross Hatch Cutter 1mm (40mils) Blade. Includes Adhesion Test Tape 50mm & Illuminated Magnifier X3 £295.00

X2002 Cross Hatch Cutter 2mm (80mils) Blade. Includes Adhesion Test Tape 50mm & Illuminated Magnifier X3 £295.00

XS001 Spare Cutter Head 1mm (40mils) £125.00

XS002 Spare Cutter Head 2mm (80mils) £125.00

XA001 Spare Adhesion Test Tape 25mm (1”) 60m Roll £25.00

NXC01 Cross Hatch Cutter Conformance Certificate £5.00

NXC03 Adhesion Test Tape Conformance Certificate £5.00

7

Paint Inspection Kit

ISO 2808: Paints and varnishes. Determination of film thickness.

ISO 19840: Corrosion protection of steel structures by protective paint systems. Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces.

ISO 8503-5: Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Part 5: Replica tape method for the determination of the surface profile.

ISO 8502-6: Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Part 6: Extraction of soluble contaminants for analysis. The Bresle Method.

ISO 8502-9: Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Part 9: Field method for the conductometric determination of water-soluble salts.

ISO 8502-3: Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Part 3: Assessment of dust on steel surfaces prepared for painting. Pressure-sensitive tape method.

ISO 8502-4: Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Part 4: Guidance on the estimation of the probability of condensation prior to paint application.

K3001 Paint Inspection Kit (Metric) £1395.00

K3002 Paint Inspection Kit (Imperial) £1395.00

NK002 Paint Inspection Kit Calibration Certificates £150.00

8


Paint Inspection Kit Spares

CS301 Spare Ferrous Probe 0–1000µm £195.00


Z1003 Spare Zero Disk Ferrous £25.00



R1002 Spare Testex Tape X Coarse (50 impressions) 40–115µm (1.5–4.5mils) £35.00

NRC02 Testex Tape Conformance Certificate £5.00

PS001 Spare Bresle Patches (pack of 50) Standard Adhesion £45.00

PS003 Spare Deionised Water (500ml) £10.00

PS004 Spare Syringes (pack of 3) £10.00

PS005 Spare Conductivity Meter Calibration Solution £25.00

PS006 Spare 25ml Beaker £5.00

PS007 Spare Conductivity Meter Sensor £95.00

NPC04 Bresle Patches Conformance Certificate £5.00

NPC01 Conductivity Meter Calibration Solution Conformance Certificate £5.00

PS201 Spare Dust Test Tape 25mm (1”) 60m Roll £25.00

PS202 Spare Dust Test Comparator Charts (pack 50) £25.00

NPC05 Dust Test Tape Conformance Certificate £5.00

NPC06 Dust Test Comparator Charts Conformance Certificate £5.00

HS301 Spare Humidity Sensor 0–100%rh/-10 to 70°C (14 to 160°F) £95.00

HS302 Spare Surface Temperature Probe -20 to 80°C (-4 to 176°F) £75.00

NH101 Humidity Sensor Calibration Certificate £25.00

NH102 Surface Temperature Probe Calibration Certificate £25.00

9

Surface

Testex Tape

ISO 8503-5: Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Part 5: Replica tape method for the determination of the surface profile.

R1001 Testex Tape Coarse (50 impressions) 20–64µm (0.8–2.5mils) £35.00

R1002 Testex Tape X Coarse (50 impressions) 40–115µm (1.5–4.5mils) £35.00

R1004 Testex Gauge (metric). Includes Testex Tape Coarse & Testex Tape X Coarse £295.00

R2004 Testex Gauge (imperial). Includes Testex Tape Coarse & Testex Tape X Coarse £295.00

NR001 Testex Gauge Calibration Certificate £25.00

NRC02 Testex Tape Conformance Certificate £5.00

Surface Roughness Comparator

ISO 8503-1: Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces.

ISO 8503-2: Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel. Comparator procedure.

R2006 Surface Roughness Comparator Grit £95.00

R2007 Surface Roughness Comparator Shot £95.00

R2008 Illuminated Magnifier X5. Includes Grit Comparator £195.00

R2009 Illuminated Magnifier X5. Includes Shot Comparator £195.00

R2010 Illuminated Magnifier X5. Includes Grit & Shot Comparators £295.00

NRC01 Surface Roughness Comparator Conformance Certificate £5.00

10


Bresle Test

ISO 8502-6: Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Part 6: Extraction of soluble contaminants for analysis. The Bresle method.

ISO 8502-9: Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Part 9: Field method for the conductometric determination of water-soluble salts.

P2005 Bresle Test. Includes Bresle Patches (pack of 50) & Bresle Patches Plus (pack of 50) £395.00

PS001 Spare Bresle Patches (pack of 50) Standard Adhesion £45.00

PS002 Spare Bresle Patches Plus (pack of 50) High Adhesion £50.00

PS003 Spare Deionised Water (500ml) £10.00

PS004 Spare Syringes (pack of 3) £10.00

PS005 Spare Conductivity Meter Calibration Solution £25.00

PS006 Spare 25ml Beaker £5.00

PS007 Spare Conductivity Meter Sensor £95.00

NPC01 Bresle Calibration Solution Conformance Certificate £5.00

NPC04 Bresle Patches Conformance Certificate £5.00

Dust Test

ISO 8502-3: Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Part 3: Assessment of dust on steel surfaces prepared for painting. Pressure-sensitive tape method.

P4001 Dust Test. Includes Dust Test Tape & Dust Test Charts (pack of 50) £195.00

PS201 Spare Dust Test Tape 25mm (1”) 60m Roll £25.00

PS202 Spare Dust Test Comparator Charts (pack 50) £25.00

NPC05 Dust Test Tape Conformance Certificate £5.00

NPC06 Dust Test Comparator Charts Conformance Certificate £5.00

Rust Grade Book

ISO 8501-1: Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings.

U1007 Rust Grade Book (ISO 8501-1) £325.00

NPC08 Rust Grade Book Conformance Certificate £5.00

11


Dewpoint Meter

ISO 8502-4: Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Part 4: Guidance on the estimation of the probability of condensation prior to paint application.

H3001 Dewpoint Meter 0–100%rh/-10 to 70°C (14 to 160°F). Includes Humidity Sensor & Surface Temp Probe £295.00

HS301 Spare Humidity Sensor 0–100%rh/-10 to 70°C (14 to 160°F) £95.00

HS302 Spare Surface Temperature Probe -20 to 80°C (-4 to 176°F) £75.00

NH101 Humidity Sensor Calibration Certificate £25.00

NH102 Surface Temperature Probe Calibration Certificate £25.00

12


Gloss Meter

ISO 2813. Paints and varnishes. Determination of specular gloss of non-metallic paint films at 60 degrees and 20 degrees

G2001 Gloss Meter Standard 60° 0–100GU £995.00

G2002 Gloss Meter Standard 60°/20°/Haze 0–100GU/HU £1295.00

G2101 Gloss Meter Top 60° 0–100GU £1095.00

G2102 Gloss Meter Top 60°/20°/Haze 0–100GU/HU £1395.00

NG001 Gloss Meter Calibration Certificate £25.00

NG002 Calibration Tile Calibration Certificate £25.00

13


Paint Test Equipment

3–4 The Courtyard

Greenfield Farm Estate Congleton, Cheshire

CW12 4TR, England

www.paint-test-equipment.com

Tel: +44 (0)1260 275614

E-mail: [email protected]

Paint Test Equipment reserves the right to alter specifications without prior notice. Copyright Paint Test Equipment.

Distributor

us dollar and euro pricing is available online - paintline ltdpaintlineltd.com/pdf/painttest.pdf ·...

Documents