upgrade firmware tools user guide - controlsatperu.com 2/fw_upgrade_tool_lite_ugd-v1... · status:...
TRANSCRIPT
GSM/GPRS/GPS Tracker Upgrade Tool User Guide TRACUT001
Revision: 1.13
http://www.queclink.com [email protected]
Firmware Upgrade Tool Lite User Guide
FW_Upgrade_Tool_Lite_UGD_V1.12 - 1 -
Document Title: Firmware Upgrade Tool Lite User Guide
Revision: 1.13
Date: 2012-08
Status: Release
Document Control ID: FW_Upgrade_Tool_Lite_UGD_V1.13
General Notes Queclink offers this information as a service to its customers, to support application and engineering efforts that use the products designed by Queclink. The information provided is based upon requirements specifically provided to Queclink by the customers. Queclink has not undertaken any independent search for additional relevant information, including any information that may be in the customer’s possession. Furthermore, system validation of this product designed by Queclink within a larger electronic system remains the responsibility of the customer or the customer’s system integrator. All specifications supplied herein are subject to change. Copyright This document contains proprietary technical information which is the property of Queclink Limited., copying of this document and giving it to others and the using or communication of the contents thereof, are forbidden without express authority. Offenders are liable to the payment of damages. All rights reserved in the event of grant of a patent or the registration of a utility model or design. All specification supplied herein are subject to change without notice at any time. Copyright © Shanghai Queclink Wireless Solutions Co., Ltd. 2012
Queclink
Confidential
Firmware Upgrade Tool Lite User Guide
FW_Upgrade_Tool_Lite_UGD_V1.12 - 2 -
Contents
Contents ........................................................................................................................... 2Figure Index ...................................................................................................................... 30. Revision history ............................................................................................................. 41. Introduction ................................................................................................................... 52. Installations and Upgrade ................................................................................................ 63. Firmware ....................................................................................................................... 74. Introduction of the Tool ................................................................................................... 8
4.1. Introduction of the UI ............................................................................................. 84.1.1. Configuration ............................................................................................... 94.1.2. Files setting ................................................................................................114.1.3. Start button ................................................................................................ 134.1.4. Stop button ................................................................................................ 17
4.2. Abnormalities ...................................................................................................... 19
Queclink
Confidential
Firmware Upgrade Tool Lite User Guide
FW_Upgrade_Tool_Lite_UGD_V1.12 - 3 -
Figure Index
FIGURE 1 UI OF THE MAIN INTERFACE ......................................................................................................8FIGURE 2: UI OF SELECTING THE MODEL NAME ..................................................................................9FIGURE 3: UI OF PORT ......................................................................................................................................10FIGURE 4: UI OF BAUD RATE ........................................................................................................................11FIGURE 5: UI OF SELECTING SCATTER FILE ..........................................................................................12FIGURE 6: UI OF SCATTER FILE SELECTED ............................................................................................12FIGURE 7: UI OF SCATTER FILE SELECTED ............................................................................................13FIGURE 8: UI OF STARTING UPGRADE ......................................................................................................14FIGURE 9: UI OF UPGRADE OK .....................................................................................................................15FIGURE 10: UI OF DA PERCENT ....................................................................................................................16FIGURE 11: UI OF DOW NLOAD PERCENT ................................................................................................16FIGURE 12: UI OF CLEAR DATA PERCENT ...............................................................................................17FIGURE 13: UI OF STOP UPGRADE ..............................................................................................................18FIGURE 14: UI OF PORT ERROR ....................................................................................................................19FIGURE 15: UI OF BAUD RATE ERROR ......................................................................................................20FIGURE 16: UI OF UPGRADE WITH INCORRECT SCATTER FILE PATH .........................................21FIGURE 17: UI OF UPGRADE WITH INCORRECT SCATTER FILE ....................................................22FIGURE 18: UI OF POWER SUPPLY OR USB ABNORMAL ...................................................................23FIGURE 19: UI OF POWER SUPPLY OR USB ABNORMAL ...................................................................24FIGURE 20: UI OF FLASH TYPE DOES NOT MATCH .............................................................................25
Queclink
Confidential
Firmware Upgrade Tool Lite User Guide
FW_Upgrade_Tool_Lite_UGD_V1.12 - 4 -
0. Revision history
Revision Date Author Description of change 1.00 2009-09 Moon XIE Initial 1.11 2010-09 Moon XIE Initial 1.12 2012-05 Alan ZHANG Initial
1.13 2012-8 Alan ZHANG Inc rease model names and Abnormalities
Queclink
Confidential
Firmware Upgrade Tool Lite User Guide
FW_Upgrade_Tool_Lite_UGD_V1.12 - 5 -
1. Introduction
The present document describes how to upgrade firmware using “Firmware Upgrade Tool Lite VX.XX” which provided by Queclink.
Queclink
Confidential
Firmware Upgrade Tool Lite User Guide
FW_Upgrade_Tool_Lite_UGD_V1.12 - 6 -
2. Installations and Upgrade
The tool can run approximately in PC without any installations if the OS of PC is among the
ones listed below.
Windows 95
Windows 98
Windows 2000
Windows ME
Windows XP
Windows 7
Any upgraded version of the tool will be informed in advance and provided by Queclink.
Queclink
Confidential
Firmware Upgrade Tool Lite User Guide
FW_Upgrade_Tool_Lite_UGD_V1.12 - 7 -
3. Firmware
Flash Type will be selected automatically based on model name. Flash Type: NOR The firmware package which provided by Queclink contains three files:
.txt file: the scatter files to describe layout of the firmware image on memory.
database file: used in the data Tool.
.bin file: the firmware image file.
Flash Type: NAND (For example: GT500) The firmware package which provided by Queclink contains six files:
One txt file: the scatter file to describe layout of the firmware image on memory.
Three ROM file:the firmware image file.
Two BOOTLADER file:the bootload image file.
Queclink
Confidential
Firmware Upgrade Tool Lite User Guide
FW_Upgrade_Tool_Lite_UGD_V1.12 - 8 -
4. Introduction of the Tool
The tool is used to upgrade firmware which provided by Queclink. It works as following steps: Step1: Select the .txt scatter file corresponding to the .bin file. Step2: Choose the correct serial port and baud rate. Step3: Click Start Step4: Set the device into download mode. (Make sure the terminal is power off.)
button to start downloading.
The following describes the detail of using the upgrade tool.
4.1. Introduction of the UI
The figure 1 shows the main interface of the tool. This tool supports many model names to upgrade firmware, such as GT300/GL200/GV100/GV200/CP100/GA100/GT500/GV55/GV320/GV35 etc. Please select the correct model name as shown in figure 2.
Figure 1 UI of the main interface
Queclink
Confidential
Firmware Upgrade Tool Lite User Guide
FW_Upgrade_Tool_Lite_UGD_V1.12 - 9 -
Figure 2: UI of selecting the model name
Note: There are two choices in the Operation
, the one is default named “Upgrade Firmware and Clear User Data” and the other one “Upgrade Firmware Only” is reserved which customer can ignore.
4.1.1. Configuration
A) Port According to the connection between PC and terminal, select the right serial port as figure 3.
Queclink
Confidential
Firmware Upgrade Tool Lite User Guide
FW_Upgrade_Tool_Lite_UGD_V1.12 - 10 -
Figure 3: UI of Port
B) Baud rate Choose an appropriate baud rate. Please refer to figure 4. Queclink
Confidential
Firmware Upgrade Tool Lite User Guide
FW_Upgrade_Tool_Lite_UGD_V1.12 - 11 -
Figure 4: UI of Baud rate
Note: The maximal baud rate of standard serial cable is 115200, and the USB Serial cable is 460800.
C) Get Debug Log File This function is used for more information, the customer can ignore it.
4.1.2. Files setting
Click Set Scat
button to select the scatter file. The tool will match the .bin file in the same folder automatically after selected correct scatter file. Dialogue frames are shown in figure 5, figure 6 and figure 7.
Queclink
Confidential
Firmware Upgrade Tool Lite User Guide
FW_Upgrade_Tool_Lite_UGD_V1.12 - 12 -
Figure 5: UI of Selecting Scatter File
Figure 6: UI of Scatter File Selected
Queclink
Confidential
Firmware Upgrade Tool Lite User Guide
FW_Upgrade_Tool_Lite_UGD_V1.12 - 13 -
Note: GT500 little difference with other model names, the tool will match the .bin file and BOOTLOADER file in the same folder automatically after selected correct scatter file. Dialogue frames are shown in figure 7.
Figure 7: UI of Scatter File Selected
4.1.3. Start button
Firstly click the StartSecondly Plug the USB data cable to terminal and wait for the response. The upgrade tool will finish the rest steps by itself.
button to upgrade the chosen firmware. Please refer in figure 8.
Fina lly, it will ind icate “Mission Accomplish. Pass.” if successfully as shown in figure 9.
Queclink
Confidential
Firmware Upgrade Tool Lite User Guide
FW_Upgrade_Tool_Lite_UGD_V1.12 - 14 -
Figure 8: UI of Starting Upgrade
Queclink
Confidential
Firmware Upgrade Tool Lite User Guide
FW_Upgrade_Tool_Lite_UGD_V1.12 - 15 -
Figure 9: UI of Upgrade OK
The progress bars on the right of Start
DA Percent
button indicates the progress of upgrading firmware and shows the time expire of upgrading. There are several steps in the progress of upgrading firmware.
Download Percent Clear the flash
Dialogue frames are shown in figure 10, figure 11 and figure 12.
Queclink
Confidential
Firmware Upgrade Tool Lite User Guide
FW_Upgrade_Tool_Lite_UGD_V1.12 - 16 -
Figure 10: UI of DA Percent
Figure 11: UI of Download Percent
Queclink
Confidential
Firmware Upgrade Tool Lite User Guide
FW_Upgrade_Tool_Lite_UGD_V1.12 - 17 -
Figure 12: UI of Clear data Percent
Note: To make sure the tool runs successfully, follow ing preparations must be done in advance:
Link PC and module correctly Choose the correct serial port and baud rate Choose the right file to be upgraded
4.1.4. Stop button
Click the StopWarning:
button to stop upgrading. The tool will ind icate as shown in figure 14.
If the upgrade process is interrupted, there would be no valid firmware in the module. So it is strongly recommended never to stop the firmware upgrade process.
Queclink
Confidential
Firmware Upgrade Tool Lite User Guide
FW_Upgrade_Tool_Lite_UGD_V1.12 - 18 -
Figure 13: UI of Stop Upgrade
Queclink
Confidential
Firmware Upgrade Tool Lite User Guide
FW_Upgrade_Tool_Lite_UGD_V1.12 - 19 -
4.2. Abnormalities
The wrong parameter of Port and Baud rate, the damaged EVB and module, the incorrect file, etc. may lead to abnormalities as following.
A) Wrong parameter of Port If the port is occupied or data cable is not connected, may appear the following screenshot situation.
Figure 14: UI of Port ERROR
Queclink
Confidential
Firmware Upgrade Tool Lite User Guide
FW_Upgrade_Tool_Lite_UGD_V1.12 - 20 -
B) Wrong parameter of Baud rate Upgrade software need to select the correct baud rate,if you choose the wrong baud rate may occur the following conditions
Figure 15: UI of Baud rate ERROR
Queclink
Confidential
Firmware Upgrade Tool Lite User Guide
FW_Upgrade_Tool_Lite_UGD_V1.12 - 21 -
C) Upgrade with Incorrect File Path The upgrade software need to select the files placed in the correct path, otherwise it will go wrong,For example the correct path of the software is E:\ProjectCase\Queclink_Firmware_Upgrade__V1.25test\GT500\GT500R00A01V13M512_HYNIX.bin,you chooses the other path to the file does not exist. The situation in Figure 16 may occur.
Figure 16: UI of Upgrade with Incorrect Scatter File Path
Queclink
Confidential
Firmware Upgrade Tool Lite User Guide
FW_Upgrade_Tool_Lite_UGD_V1.12 - 22 -
D) Upgrade with Incorrect File In the process of upgrading, select the wrong file to upgrade will not succeed, such as you want to upgrade the GT500 terminal equipment, but your choice is GA100 software upgrade package, will appear the following conditions
Figure 17: UI of Upgrade with Incorrect Scatter File
Queclink
Confidential
Firmware Upgrade Tool Lite User Guide
FW_Upgrade_Tool_Lite_UGD_V1.12 - 23 -
E) Power supply or USB Abnormal In the process of upgrading, if the data cable and the computer is disconnected, or disconnect the data lines and terminal equipment, the upgrade is unsuccessful; there will be the following situation. Dialogue frames are shown in figure 18 and figure 19.
Figure 18: UI of Power supply or USB Abnormal Queclink
Confidential
Firmware Upgrade Tool Lite User Guide
FW_Upgrade_Tool_Lite_UGD_V1.12 - 24 -
Figure 19: UI of Power supply or USB Abnormal
Queclink
Confidential
Firmware Upgrade Tool Lite User Guide
FW_Upgrade_Tool_Lite_UGD_V1.12 - 25 -
F) Flash type does not match If firmware selected in upgrade tool and flash type do not match, there will be fail as Figure 20. Suc h as upgrading GV200 which flash type is TOSHIBA, and using GV200 NMX firmware in upgrade tool, fail frames are shown in figure 20 as “Failed to Match Flash Type”. Note: If you are not clear for the flash type in your device, please contact with Queclink technical support.
Figure 20: UI of Flash type does not match
Queclink
Confidential