um-pvr9200t_600uk

8/7/2019 UM-PVR9200T_600UK

http://slidepdf.com/reader/full/um-pvr9200t600uk 1/78

8/7/2019 UM-PVR9200T_600UK


GB

1

User’s Manu

al

Notice

Thank you fo

r purchasing a H

umax PVR-9200T

product.

Your PVR-9200T is now compatible with Freeview Playback Group 2 requirem

ents.

Freeview Playbac

k explained:

•

Accurate record

ing

The start and end times o scheduled recordings will track the signal meaning the recording will start

and stop at the t

imes sent by the broadcaste

rs. I a programme starts ear

ly or runs late the record tim

e

will automatically be adjusted to record the whole programme (page GB

37, GB41)

•

Series Link

I a programme you wish to record is in a series, you can now record the whole series. I the

programme changes to a dif erent day or tim

e the PVR-9200T will track these changes and still record

the programme. (page GB37, GB38, GB41)

•

Alternate Instances

I a scheduled re

cording(s) overlap with othe

r programmes set to record you will be given the option

to record one o the programmes later that, day or week, on the same ch

annel or a dif erent channel.

•

Split Recording

s

I a programme has two parts split by another entry in the Guide (e.g. a lm divided in to two parts b

y

a News program

me) you will be given the op

tion to set both parts to record.(page GB37, GB38, GB41

)

Note: The above Freeview Playback eatures are available on channels whe

re the correct and accurate

data is being

broadcast. Some channels may not support all services.

8/7/2019 UM-PVR9200T_600UK


GB2

User’s Manual

Notice

Thank you or purchasing a HUMAX product. Please

read this user’s manual care

ully to be able to saely

install, use and maintain the product at maximum p

erormance. Keep this user’s manual next to your

product or uture reer

ence. The inormation in this user’s manual is subject to change without notice.

Copyright (Copyright © 2007 HUMAX Corpo

ration)

Not to be copied, used or translated in part or whole without HUMAX’s prior consent in writing except

approval o ownership o copyright and copyright l

aw.

Warranty

The warranty does not cover parts which may beco

me deective due to misuse o the inormation

contained in this manu

al.

Trademarks

•

Viaccess is a tradem

ark o France Telecom.

•

CryptoWorks is a trademark o Philips Electronics N.V.

•

Irdeto is a trademark o Mindport BV.

•

Nagravision is a reg

istered trademark o KUDELSKI S.A.

•

Conax is a trademark o Telenor Conax AS.

•

Manuactured under license rom Dolby Labora

tories.

‘Dolby’ and the dou

ble-D symbol are trademark

s o Dolby Laboratories.

Warnings, Cautions and Notes

Throughout the whole manual, pay special attentio

n to the ollowing marks tha

t indicate hazardous

situations.

•

Warning

Indicates a hazardo

us situation which could result in serious injury.

•

Caution

Indicates a situation which could damage the equipment or other apparatu

s.

•

Note

Indicates additional inormation to make the us

er aware o possible problem

s and inormation o any

importance to help

understand, use and maintain the installation.

Meaning of Symbol

s

To reduce the risk o electric shock, do not remove cover (or back). No user serviceable parts

inside. Reer servicing to quali ed service personnel.

This symbol indicates dangerous voltage inside the product that presents a risk o electric

shock or personal injury.

This symbol indicates important instructions accompanying the product.

8/7/2019 UM-PVR9200T_600UK


GB

3

User’s Manu

al

Notice

Instruction about the ‘WEEE’ Symbol

This pro

duct should not be disposed with other household wastes at the end o its working

lie. Please separate this rom other types o wastes and recycle it responsibly to promote the

sustainable reuse o material resour

ces. This will prevent possible harm to the environment

or human health rom uncontrolled

waste disposal.

•

Domestic users

: Please contact either the re

tailer where you purchased this product or their local

government o

ce or details o where and h

ow they can take this item or environmentally sae

recycling.

•

Business users: Contact your supplier and c

heck the terms and conditio

ns o the purchase contract.

This product sho

uld not be mixed with other commercial wastes or disp

osal.

Important Notice

Beore unpacking th

is product, you should check that you are in a Freeview Coverage area in one o the

ollow ways:

•

Contact the Hum

ax Customer Helpline on 0870 247 8800 (all calls charge

d at the national rate) or

inormation on Freeview coverage in your ar

ea.

•

Text your postco

de to Freeview on 83331 (standard text rates apply). Freeview will reply with advice

on whether you can receive Digital TV.

•

Telephone Freev

iew on 08708 80 99 80 (all calls charged at National Rate

). They will tell you whether

you can receive Digital TV in your postcode area.

•

Visit www.reeview.co.uk. You can enter your postcode or inormation on availability in your area.

•

Telephone the shop where you bought this product. (The number is usually printed on the till receip

t).

Note: To receive digital signals you may need to reposition or upgrade your existing roo aerial.

1. Due to the age o

r condition o your aerial an

d cabling you may not be ab

le to receiver digital signals.

2. In your location the digital channels may be transmitted on a dif erent requency to your existing

analogue signals and you may need a dif ere

nt type o aerial to receive them.

3. The new digital channels may be transmitted rom a new transmitter, wh

ich means your aerial may

need to be realigned. (Alternatively, you cou

ld add a second aerial to you

r system.)

For any further information contact the Humax Customer Helpline:

•

Tel: 0870 247 88

00

•

Email : uksuppo

[email protected]

•

Open : Lines open Monday to Friday 9:00am

to 6:00pm (Excludes Bank H

olidays)

Note: Calls charged at the national rate

8/7/2019 UM-PVR9200T_600UK


GB4

User’s Manual

This product has been manuactured to comply with international saety standards. Please read the

ollowing saety precau

tions careully.

Safety Instructions and Precautions

1. MAINS SUPPLY

90-250V a.c., 50/60Hz

• Operate this prod

uct only rom the type o pow

er supply indicated on the m

arking label. I you are not

sure o the type o

power supplied to your hom

e, consult your local power company.

• Disconnect the p

roduct rom the mains beore you start any maintenance or

installation procedures.

2. OVERLOADING

• Do not overload a wall outlet, extension cord o

r adapter as this may result in electric re or shock.

3. LIQUIDS

• The product should not be exposed to liquid o any kind. In addition, no objects lled with liquid should

be placed on the apparatus.

4. CLEANING


roduct rom the wall outlet be

ore cleaning.

• Use a light damp

cloth (no solvents) to dust the product.

5. VENTILATION

• The slots on top o the product must be let un

covered to allow proper air o

w into the unit.

• Do not stand the product on sot urnishings or carpets.

• Do not stack elec

tronic equipments on top o t

he product.

6. ATTACHMENTS

• Do not use any unsupported attachments as th

ese may be hazardous or cause damage to the product.

7. CONNECTION TO T

HE AERIAL


roduct rom the mains beore connecting or disconnecting the cable rom the aerial.

Failure to do so can damage the aerial.

8. CONNECTION TO T

HE TV


roduct rom the mains beore connecting or disconnecting the cable rom the TV.

Failure to do so can damage the TV.

9. LOCATION

• Place the produc

t indoors to avoid exposing it to lightning, rain or sun.

• Do not place it near a radiator or heat register.

• We recommend that the product has 10 cm cle

arance rom any other appliances susceptible to

electromagnetic in uences, such as a TV or a VCR.

• Do not block the openings with any object, and do not place the product on

a bed, soa, rug, or other

similar surace.

• I you place the p

roduct on a rack or a bookcas

e, ensure that there is adequate ventilation and that you

have ollowed the manuacturer’s instructions or mounting.

• Do not place the product on an unstable cart, stand, tripod, bracket, or table where it can all. A alling

product can caus

e serious injury to a child or adult, and serious damage to th

e appliance.

10. LIGHTNING, STORM or NOT IN USE

• Unplug the product rom the wall outlet and disconnect the antenna during a thunderstorm or when let

unattended and unused or long periods o tim

e. This will prevent damage to the unit due to lightning

and power-surge

s.

Safety Warning

8/7/2019 UM-PVR9200T_600UK


GB5

User’s Manu

al

Safety W

arning

11. EXTRANEOUS O

BJECTS

• Do not insert anything through the openings in the unit, where they can touch dangerous voltage poin

ts

or damage pa

rts.

12. REPLACEMENT of PARTS

• When replace

ment o parts is required, be s

ure the service technician use

s replacement parts speci ed

by the manuacturer or those that have the same characteristics as the or

iginal part. Unauthorized

substitution m

ay result in additional damag

e to the unit.

Warning

1. To avoid damage of the power cord or plu

g;

• Do not modiy or process the power cord or plug arbitrarily.

• Do not bend or twist the power cord.

• Make sure to disconnect the power cord ho

lding the plug.

• Keep heating appliances as ar as possible rom the power cord in order to prevent the cover vinyl rom

melting.

• The mains plu

g, as a disconnection device, shall remain readily accessible

by the user.

2. To avoid electrical shock;

• Do not open the main body.

• Do not insert metal or in ammable objects inside the product.

• Do not touch the power plug with wet hands.

• Disconnect th

e power cord in case o lightn

ing.

3. To avoid damage of product;

• Do not use the product when it is out o ord

er. I you continue to use the product when deective, serio

us

damage can b

e caused to it. Make sure to contact your local product distributor i the product is out o

order.

• Do not insert metal or alien substance into the slots or the modules or Sm

artcards. It may cause damage

to the produc

t and reduce its lie span.

4. Hard Disk Drive

• Do not move the product or turn the power of suddenly while the hard d

isk drive is running. The

company shall not be liable or any corruption o data on the hard disk dr

ive caused by the carelessness

or misuse o u

sers.

8/7/2019 UM-PVR9200T_600UK


GB6

User’s Manual

Contents

1. Before Using the Product. . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB8

1.1 Package Contents. . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. . . . . . . . . . . . . . . . . . . GB8

1.2 Front Panel . . . . . . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. . . . . . . . . . . . . . . . . . . GB9

1.3 Conditional Access . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. . . . . . . . . . . . . . . . . . GB10

1.4 Rear Panel. . . . . . . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. . . . . . . . . . . . . . . . . . GB11

1.5 Remote Control . . . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. . . . . . . . . . . . . . . . . . GB12

2. Setup . . . . . . . . . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB15

2.1 Connecting the A

ntenna . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. . . . . . . . . . . . . . . . . . GB15

2.2 Connecting the T

V . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. . . . . . . . . . . . . . . . . . GB16

2.3 Connecting the T

V and VCR . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. . . . . . . . . . . . . . . . . . GB18

2.4 Connecting the A

udio System. . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. . . . . . . . . . . . . . . . . . GB20

2.5 Powering On . . . . . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. . . . . . . . . . . . . . . . . . GB21

3. Installation Wizard . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB22

3.1 Search . . . . . . . . . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. . . . . . . . . . . . . . . . . . GB22

4. Basic Operation . . . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB23

4.1 Switching Channel . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. . . . . . . . . . . . . . . . . . GB23

4.2 Volume Control . . . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. . . . . . . . . . . . . . . . . . GB23

4.3 Text and Interactive Services. . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. . . . . . . . . . . . . . . . . . GB23

4.4 Programme Inormation (i-plate) . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. . . . . . . . . . . . . . . . . . GB24

4.5 Option List . . . . . . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. . . . . . . . . . . . . . . . . . GB25

4.6 Channel List . . . . . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. . . . . . . . . . . . . . . . . . GB28

4.7 PIP (Picture-in-Pic

ture) Screen . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. . . . . . . . . . . . . . . . . . GB29

4.8 Game. . . . . . . . . . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. . . . . . . . . . . . . . . . . . GB30

5. PVR. . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB31

5.1 Time Shited Reco

rding (TSR) . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. . . . . . . . . . . . . . . . . . GB31

5.2 Recording. . . . . . . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. . . . . . . . . . . . . . . . . . GB33

5.3 Programme Playb

ack in the Play List. . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. . . . . . . . . . . . . . . . . . GB34

5.4 Chase Play . . . . . . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. . . . . . . . . . . . . . . . . . GB35

5.5 Bookmark. . . . . . . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. . . . . . . . . . . . . . . . . . GB35

5.6 Additional Time S

hit Operations . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. . . . . . . . . . . . . . . . . . GB36

6. Programme Guide . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB37

6.1 Viewing Programme Guide Inormation. . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. . . . . . . . . . . . . . . . . . GB37

6.2 Selecting Channe

l Group . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. . . . . . . . . . . . . . . . . . GB38

6.3 Using Time Bar. . . . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. . . . . . . . . . . . . . . . . . GB39

6.4 Schedule . . . . . . . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. . . . . . . . . . . . . . . . . . GB39

6.5 Finding Programmes. . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. . . . . . . . . . . . . . . . . . GB40

7. Record. . . . . . . . . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB41

7.1 Recorded Program

me . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. . . . . . . . . . . . . . . . . . GB41

7.2 Recording Schedule . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. . . . . . . . . . . . . . . . . . GB44

7.3 MP3. . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. . . . . . . . . . . . . . . . . . GB46

7.4 Digital Album . . . . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. . . . . . . . . . . . . . . . . . GB47

8/7/2019 UM-PVR9200T_600UK


GB7

User’s Manu

al

Contents

7.5 File Download rom PC . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB

48

7.6 HDD Control . . . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB

49

7.7 Recording’s St

art/End Time. . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB

49

8. Preferences. . . . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB

50

8.1 Parental Control. . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB

50

8.2 Language Setting. . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB

51

8.3 Time Setting . . . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB

52

8.4 A/V Control. . . . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB

53

8.5 UHF Tuning. . . . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB

54

8.6 Miscellaneous

Settings . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB

55

9. Edit Channels . . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB

56

9.1 Edit Channel L

ists. . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB

56

9.2 Edit Favourite Channels . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB

57

10. Installation . . . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB

58

10.1 Automatic Search . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB

58

10.2 Manual Search . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB

59

10.3 Deault Setting. . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB

60

10.4 Antenna Pow

er. . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB

60

11. Software Update . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB

61

11.1 OTA (Over the Air). . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB

61

11.2 Updating Sotware rom Menu. . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB

62

11.3 Sotware Update rom PC . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB

64

12. System. . . . . . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB

65

12.1 Status. . . . . . . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB

65

12.2 Signal Detection. . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB

65

12.3 Common Interace . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB

65

13. Appendix . . . . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB

66

13.1 Menu Map. . . . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB

66

13.2 Trouble Shoo

ting . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB

67

13.3 Error Messag

e . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB

71

13.4. Speci cation

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB

72

13.5 Glossary . . . . . . . . . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB

74

13.6 Service and S

upport . . . . . . . . . . . . . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

. GB

75

8/7/2019 UM-PVR9200T_600UK


GB8

User’s Manual

This chapter provides d

etail instructions on the pro

duct and its accessories.

1.1 Package Contents

Please check all packag

e contents beore using you

r product.

Note:

•

Package contents m

ay vary according to area.

•

CD-ROM contains USB driver and application.

Warning: The company shall not be liable or problems caused by changing h

ard disk drive by user.

1. Before Using the Product

User’s Manual

Qu

ick Guide

User’s M

anual

Remote Control

SCART Cable

Quic

k Guide

Batteries

CD-ROM

8/7/2019 UM-PVR9200T_600UK


GB9

User’s Manual

1. Before Using the P

roduct

1.2 Front Panel

1. STANDBY BUTTON

Switches betwe

en operation and standby m

odes.

2. RECORD BUTTON

Records programme.

3. STOP BUTTON

Stops Recording

and stops Playback o a Recording

4. PLAY BUTTON

Plays programm

e.

5. PAUSE BUTTON

Pauses program

me.

6. SOURCE BUTTO

N

Selects the inpu

t source between TV and the product.

7. CH+/CH- BUTTON

Moves the TV/ra

dio channel up or down.

8. USB DEVICE

Connect to the PC port. (For moving the recorded le, MP3 or jpeg le to

the PC).

9. CI-MODULE SLOT

A slot or a CI-M

odule with a Smartcard (For Pay TV channels).

Note: The ront o the product is subject to change without notice.

1

2

3

4

5

6

7

8

9

8/7/2019 UM-PVR9200T_600UK


GB10

User’s Manual


1.3 Conditional Access

Most TV and radio channels are ree to air, however some TV and radio/music c

hannels are available on a

subscription basis and can only be enjoyed via a Conditional Access componen

t. The Conditional Access

component is a remov

able Smartcard.

1. Inserting a CI-Module (with Smartca

rd)

A CI-Module looks like a PC map (PCMCIA) or lapto

ps. There are dif erent kinds

o CI-Modules, suitable or

dif erent coding system

s; Irdeto, Conax and more. Additionally to the CI-Module, a Smartcard is needed to

decode the channels.

1. Open the right-han

d ap on the ront o the product.

2. Follow the instruct

ions o the module and insert the Smartcard into the CI-Module.

3. Keep the CI-Module (with the Smartcard) horizontal.

4. Insert the CI-Modu

le into the slot.

CI-Module

Smartcard

8/7/2019 UM-PVR9200T_600UK


GB11

User’s Manual

1. Before Using the P

roduct

1.4 Rear Pan

el

1. ANTENNA IN

Connects the aerial cable.

2. LOOP OUT

Connects to the

RF IN o the TV or VCR using

an RF cable.

3. TV SCART

Connects to the

TV using a TV SCART cable.

4. VCR SCART

Connects to the

VCR or DVD using a VCR SCART cable.

5. AUDIO L/R

Connects to the

TV or VCR using an RCA cab

le.

6. VIDEO

Connects to the

TV or VCR using an RCA cab

le.

7. RS-232C

Connects to the

PC with a Null Modem cable to upgrade sotware.

8. S/PDIF

Connects to the

audio system using an S/PD

IF cable. (digital audio)

9. ON/OFF

Power on/of .

Note: The rear o the product is subject to cha

nge without notice.

1

2

3

4

5

6

7

8

9

8/7/2019 UM-PVR9200T_600UK


GB12

User’s Manual

1. Before Using the Pr

oduct

1. NUMERIC(0-9) BUT

TONS

Enters a TV/radio ch

annel number or menu

option number.

2. MENU

Displays the main m

enu.

3. PLAYBACK CONTROL BUTTONS

a. FAST REWIND

Rewinds at high speed. Each time you press

this button the rewind speed is increased.

b. PLAY

Plays at normal sp

eed or resumes.

c. FAST FORWARD

Fasts forward at high speed. Each time you press

this button the fas

t forward speed is increased.

d. RECORD

Records programme.

e. PAUSE

Pauses the live programme or recording.

f. STOP

Stops a recording or goes to the live

programme.

4. COLOUR BUTTONS

Selects colour keys or interactive/text

channels.

5. LIST

Displays the channe

l list.

6. ARROW BUTTONS

Navigates through t

he menu options.

7. EXIT

Exits all On-Screen D

isplay (OSD) screens.

8. VOL+/VOL-

Adjusts the audio vo

lume.

9. i (INFORMATION)

Displays the channe

l and programme

inormation.

1.5 Remote Co

ntrol

Note: The remote co

ntrol is subject to change

without notice.

OK

RT-531

TEXT

BACK

LIST

EXIT

GUIDE

CH

VOL

PAGE

1

2

3

4

5

6

7

8

9

0

MENU

STANDBY

PIP CH+

PIP CH-

SWAP

MOVE

PIP

OPT+

SOURCE

WIDE

a

b

c

d

e

f

1 2 3 4 6 7 85 9

Please slide dow

n the

bottom section o the

remote control to nd

the additional buttons.

8/7/2019 UM-PVR9200T_600UK


GB

13

User’s Manual


10. STANDBY

Switches betwee

n operation and standby

modes.

11. TEXT

Enters digital tex

t service.

12. GUIDE

Displays the prog

ramme guide.

13. OK

Selects a menu o

r con rms the selected

operation. Also, displays the channel list while

watching a programme.

14. BACK

Closes and returns to the previous menu and

screen.

15. CH+/CH- or PAG

E+/PAGE-

Changes the channel or page.

16. MUTE

Mutes or unmute

s the audio temporarily.

17. Group 17

g. SOURCE

Controls the in

put o TV.

h. OPT+

Displays the ch

annel attributes while watching

a programme.

i. PLAY LIST

Displays the re

corded programme list.

j. SUBTITLE

Displays the su

btitle language list.

k. AUDIO

Displays the au

dio list.

l. WIDE

Sets the displa

y ormat.

OK

RT-531

TEXT

BACK

LIST

EXIT

GUIDE

CH

VOL

PAGE

1

2

3

4

5

6

7

8

9

0

MENU

STANDBY

PIP CH+

PIP CH-

SWAP

MOVE

PIP

OPT+

SOURCE

WIDE

11

12

13

14

15

16

OPT+

SOURCE

WIDE

g

h

i

j

k

l

17

10

Please slide down the




8/7/2019 UM-PVR9200T_600UK


GB14

User’s Manual

1. Before Using the Pr

oduct

18. Group 18

m.ADD BOOKMARK

Saves the current viewing position as a

bookmark.

n. BOOKMARK LIST

Displays the list o saved viewing positions.

o. A-B

Plays back a speci ed block repeatedly.

p. INSTANT REPLAY

Jumps back and p

lays rom that location.

(See section 8.6)

q. SLOW MOTION

Plays the program

me in slow motion. Each

time you press this button, speed is slowed

progressively more.

r. COMMERCIAL SK

IP

Jumps ahead in a recording. (See section 8.6)

19. PIP BUTTONS

s. PIP

Displays the PIP (P

icture in Picture) screen.

t. PIP CH+/CH-

Changes the PIP c

hannel.

u. MOVE PIP

Changes the position o the PIP screen.

v. SWAP PIP

Swaps the ocus b

etween the main and the PIP

screen.

20. G (Game)

Displays the games.

21. TV/RADIO

Switches between T

V and radio modes.

OK

RT-531

TEXT

BACK

LIST

EXIT

GUIDE

CH

VOL

PAGE

1

2

3

4

5

6

7

8

9

0

MENU

STANDBY

PIP CH+

PIP CH-

SWAP

MOVE

PIP

OPT+

SOURCE

WIDE

m

n

o

p

q

r

18

PIP CH+

PIP CH-

SWAP

MOVE

PIP

s u v

19

t

20

21

Please slide down the




8/7/2019 UM-PVR9200T_600UK


GB

15

User’s Manual

This chapter describes how to connect the prod

uct to the TV with the particular equipments or gaining

optimum signal qu

ality. The product provides v

arious interaces to connect

to the TV, VCR or other

devices. Select the most appropriate procedure

depending on the equipme

nt you have.

Note: If you encou

nter any problems setting up

your product, please contact your local product distributo

r.

2.1 Connect

ing the Antenna

Connect your aerial to the ANTENNA IN.

Note: Tune the TV

to an UHF channel i the product is connected to the TV

using an RF cable. For more

inormation

, please reer to 8.5 UHF Tun

ing.

2. Setup

S/PDIF

TV Antenna OUT

VIDEO

AUDIO

L

R

S/PDIF

TV Antenna OU

VIDEO

AUDIO

L

R

TV Antenna IN

RF Cable

8/7/2019 UM-PVR9200T_600UK


GB16

User’s Manual

2. Setup

2.2 Connectin

g the TV

1. Using SCART C

able

Connect the product a

nd the TV using a SCART cable.

S/PDIF

TV Antenna OUT

VIDEO

AUDIO

L

R

TV

Antenna IN

S/PDIF

TV Antenna OUT

VIDEO

AUDIO

L

R

TV

Antenna IN

TV SCART

SCART Cable

8/7/2019 UM-PVR9200T_600UK


GB

17

User’s Manual

2. Setup

2. Using RCA C

able

Connect the produ

ct and the TV using an RCA cable.

S/PDIF

TV Antenna OUT

TV Antenna IN

S/PDIF

TV Antenna OU

TV Antenna I

RCA Cable V

IDEO

AUDIO

L

R

8/7/2019 UM-PVR9200T_600UK


GB18

User’s Manual

2. Setup

2.3 Connectin

g the TV and VCR

1. Using SCART C

able

Connect the product and the TV/VCR using a SCART cable.

VCR Antenna IN

VCR Antenna OUT

S/PDIF

VIDEO

AUDIO

L

R

VCR Antenna IN

VCR Antenna OUT

S/PDIF

VIDEO

AUDIO

L

R

VCR SCART

TV Antenna IN

S/PDIF

TV Antenna OUT

VIDEO

AUDIO

L

R

TV Antenna IN

S/PDIF

TV Antenna OUT

VIDEO

AUDIO

L

R

SCART Cable

SCART Cable T

V SCART

8/7/2019 UM-PVR9200T_600UK


GB

19

User’s Man

ual

2. Setup

2. Using RF Ca

ble

1. Connect the TV

/VCR (LOOP OUT) o the pro

duct and the aerial input o the VCR using an RF cable.

2. Connect the ae

rial output o the VCR and th

e aerial input o the TV using an RF cable.

Note: For more in

ormation about UHF chann

el, please reer to 8.5 UHF Tuning.

VCR SCART

S/PDIF

VIDEO

AUDIO

L

R

VCR SCAR

S/PDIF

VIDEO

AUDIO

L

R

S/PDIF

VIDEO

AUDIO

L

R

S/PDIF

VIDEO

AUDIO

L

R

RF Cable

RF Cable

VCR Antenna IN

VCR Antenna OUT

TV Antenna IN

TV Antenna OUT

8/7/2019 UM-PVR9200T_600UK


GB20

User’s Manual

2. Setup

2.4 Connectin

g the Audio System

Select the most appro

priate procedure or your co

nvenience.

•

Connect the product and the audio system using an RCA cable.

•

Connect the product and the Dolby Digital decoder or higher quality sound using an S/PDIF cable.

AUDIO

S/PDIF

L

R

RCA Cable

S/PDIF Cable

8/7/2019 UM-PVR9200T_600UK


GB

21

User’s Man

ual

2. Setup

2.5 Powerin

g On

1. Connect the po

wer cord o the product to a wall outlet.

2. Turn on the power switch located at the ba

ck let o the product.

3. Power on by pressing the STANDBY button

o the remote control or the STANDBY button at the ront

o the product.

Zoom in

8/7/2019 UM-PVR9200T_600UK


8/7/2019 UM-PVR9200T_600UK


GB

23

User’s Man

ual

This chapter describes unctions such as switch

ing channel, volume contro

l and basic eatures or

watching program

mes.

4.1 Switching Channel

You can switch the

current channel using one o the ollowing methods.

1. Press the CH+/

CH- button.

2. Enter the channel number using the NUME

RIC(0-9) buttons to move to the channel directly.

3. Press the TV/R

ADIO button to switch betw

een TV channels and radio c

hannels.

Note:

•

You can switch

channel using the channel list or programme guide.

•

Please reer to 4.6 Channel List and Chapter 6. Programme Guide or m

ore inormation.

4.2 Volume Control

1. Press the VOL+

/VOL- button to adjust the audio volume.

2. Press the MUTE button to stop the audio temporarily.

Note: The mute unction remains set while yo

u switch channels.

4.3 Text and

Interactive Serv

ices

I your chosen channel has digital teletext eatures, you can access them. Te

letext services oten load

automatically shor

tly ater the digital teletext w

indow is displayed. In which case, simply ollow the on

screen instructions(press color buttons).

1. Press the TEXT

button to access digital tele

text.

2. Press the TEXT

button again to return to normal viewing.

3. Press the CH+/

CH- button to exit this service.

Note: I you have

subitltes displayed then you

will not be able to access th

e digital text service.

4. Basic Operation

OK

BACK

EXIT

CH

VOL

PAGE

8/7/2019 UM-PVR9200T_600UK


GB24

User’s Manual

4. Basic O

peration

4.4 Programm

e Information (i-plate)

Programme inormation is always displayed or a certain period o time whenever you switch channels.

You can view the programme inormation by pres

sing the i button while watc

hing a programme. Press the

EXIT button to hide the i-plate.

1. General Information

The general inormation is displayed on the screen as the ollowing.

1. Channel number and name

2. Programme name

3. Detailed program

me inormation: Displayed i detailed programme inorm

ation is provided.

4. Current channel list icon

5. Current time

6. Icons

Displayed only when the programme

is a split programme.


is a series programme.

Displayed only i the programme is re

cording.

Displayed only i the programme is re

served.

Represen

ts parental level. Indicates age classi cation level-i supp

lied by the broadcaster

Displayed only when the channel is a

locked channel.

Displayed only when the channel is a

scrambled (Pay TV channel)

channel.

Displayed only when subtitle inorma

tion is available.


is broadcast in Dolby Digita

l.

Displayed when the channel supports teletext (MHEG).

Displayed when the channel supports data channel.

7. Next programme inormation: Displayed i next programme inormation is provided. Press the

button to display the next programme inorm

ation.

8. Programme broad

casting time and progress b

ar: Displays programme playing time and progress bar.

Note: I there is no p

rogramme inormation available, programme inormation is not displayed.

1 2 3 4

5 6 7 8

8/7/2019 UM-PVR9200T_600UK


GB

25

User’s Man

ual

4. Basic Operation

2. Detailed Programme Inormation

.

You can see detailed inormation about the current programme.

Press the i button when the i-plate is displayed

to view detailed

inormation.

Note:

•

Press the i button again to hide the inormation box.

•

I the detail inormation is more than one p

age, use the /

button to move to the previous/next page.

4.5 Option List

You can view and con rm detailed inormation

about the current channel and change the inormation i

necessary.

1. Adding a Channel to Favourite Group

You can add the cu

rrent channel to avourite g

roup immediately. Also, you can add channels to avourite

groups.

1. Press the OPT+

button.

2. Select Favourite using the / button and

press the OK or

button.

3. Select avourite group using the / butto

n and press the OK

button to regis

ter or avourite group.

4. Press the OK button again on the selected avourite group to

release the reg

istered channel.

5. Move to the pa

rent menu using the button to save the

changes autom

atically.

Note: For detailed inormation about how to change avourite

group nam

e and how to register avourite channels rom the comp

lete channel list, please reer to

4.6 Channel List.

8/7/2019 UM-PVR9200T_600UK


GB26

User’s Manual

4. Basic O

peration

2. Subtitle

I the current program

me provides subtitle inorm

ation, you can select the lan

guage or the subtitle.

1. Press the OPT+ button.

2. Select Subtitle using the / button and press the OK or

button.

3. Select the subtitle

language using the / bu

tton and press

the OK button. Th

e subtitles will be displayed at the bottom o

the screen.

4. Select Of rom th

e subtitle menu to switch th

e subtitles of .

Note:

•

You also can chan

ge the subtitle by pressing t

he SUBTITLE

button on the rem

ote control.

•

You can select a d

eault subtitle language in M

ENU–Preerences–Language Setting–Subtitle

Language.

3. Soundtrack

I the current program

me is available in multiple audio languages, you can select the language that you

wish to listen to.


2. Select Soundtrack using the / button and press the OK or

button.

3. Select the audio language using the / button.

4. Select soundtrack

direction(let, right, stereo) using the /

button.

5. Press the EXIT or SOUNDTRACK button to exit the soundtrack

list.

Note:

•

You also can set the soundtrack by pressing th

e SOUNDTRACK

button on the rem

ote control.

•

You can select the

deault audio language you

want in

MENU–Preerences–Language Setting–Audio Language.

8/7/2019 UM-PVR9200T_600UK


GB27

User’s Man

ual

4. Basic Operation

4. Locking/Un

locking a Channel

You can lock or un

lock the current channel wh

ile watching a programme.


2. Select Lock/Un

lock using the / button and press the OK or

button.

3. Select Lock op

tion using the / button a

nd press the OK

button.

4. Select Unlock option using the / button and press the OK

button.

5. You will be pro

mpted to enter the password. Enter the

password to unlock the channel.

6. Move to the parent menu using the butt

on to save the

changes autom

atically.

Tip:

The deau

lt password is 0000. I you h

ave orgotten your password, please contact your local

product d

istributor.

5. Deleting a Channel

You can delete the

current channel while watching a programme.


2. Select Delete using the / button and press the OK or

button.

3. Select Yes in th

e con rmation message and press the OK

button.

4. Enter the password using the NUMERIC(0-9) buttons to delete

the current channel.

8/7/2019 UM-PVR9200T_600UK


GB28

User’s Manual

4. Basic O

peration

4.6 Channel L

ist

Five types o channel lists are provided or easy and quick channel browsing.

TV

T

he list o all TV channels with two sub-groups: one is sorted by channel number, the

o

ther is sorted by channel name (Alphabetical).

Radio

T

he list o all radio channels w

ith two sub-groups: one is sorted by channel number,

the other is sorted by channe

l name (Alphabetical).

Favourite

Y

ou can create ve avourite lists or quick and easy acces

s to the channels you watch

m

ore oten. Using this eature, you can skip the channels you rarely or never watch.

Playlist

Y

ou can move to the Playlist to display the recorded programmes.

PIP CH LIST

Y

ou can move to the PIP chan

nel list.

You can display the channel list and switch to ano

ther channel on the channe

l list.

1. Press the LIST button while watching a programme to display

the channel list.

2. Select a channel using the / button and press the OK button

to change the channel.

3. Enter the channel number directly using the N

UMERIC(0-9)

buttons to move the cursor to the channel you want. And then

press the OK button to change to the selected channel.

4. Press the butto

n while the channel list is displayed to view

the group list. Sel

ect a channel group using th

e / button

and press the OK or button.

Select a sub-grou

p using the / button and

then press

the OK button. Th

e channel list or the selecte

d sub-group is

displayed.

Note:

•

You can also display the channel list by pressing the OK button.

•

I there are multip

le channels, press the PAGE

+/PAGE- button

to move by page.

•

Whenever you press the TV/RADIO button while the channel

list is displayed, the channel list will switch be

tween TV and

radio channel lists.

•

To display scramb

le icon in the channel list, se

lect On in MENU-

Preerences-Misc

ellaneous Settings-Option in CH List.

•

The avourite lists

will only appear i you have

created them rst.

8/7/2019 UM-PVR9200T_600UK


GB29

User’s Man

ual

4. Basic Operation

4.7 PIP (Picture-in-Picture) S

creen

Press the PIP button while watching TV to wat

ch two channels at the same

time. The audio rom the m

ain

screen will be outputted. Press the PIP button to exit the PIP mode.

Note:

•

The teletext (M

HEG) is only available on the main screen.

•

The PIP screen

is available while recording a programme or playing back a recording. Some channe

ls

may not be available i you record two cha

nnels simultaneously.

•

Only one scram

bled (Pay TV) channel can be used with the PIP unction.

1. Changing the PIP Mode

Each time you press the PIP button, the PIP size is changed, as displayed in

the ollowing gure.

1:6 PIP s

creen

N

ormal screen

1:1 PIP screen

2. Swapping t

he PIP Screen

This unction is available in 1:6 PIP or 1:1 PIP.

Press the SWAP PIP button on the remote con

trol to swap the main

screen or the PIP screen. Press the CH+/CH- button to change the

main screen channel.

Note:

You cannot use the SWAP PIP unction in the ollowing cases:

1. When you are watching a radio channel.

2. When the scre

en displays the channel list, audio and detail

inormation.

PIP CH+

PIP CH-

SWAP

MOVE

PIP

OPT+

SOURCE

WIDE

SWAP

8/7/2019 UM-PVR9200T_600UK


GB30

User’s Manual

4. Basic O

peration

3. Moving the PIP Screen

You can move the po

sition o the PIP screen.

Each time you press t

he MOVE PIP button, the PIP screen moves, as displayed

in the ollowing gure.

4. Switching Channels in the PIP Screen

1. In PIP mode, pres

s the PIP CH+/PIP CH- butto

n to change the

channel on the PIP screen only.

2. Press the LIST bu

tton in the PIP mode and press the button

to select the chan

nel list group. Select PIP CH

LIST using the

/ button and press the OK button. Select the channel you

want using the

/ button and press the OK button.

4.8 Game

Provides various gam

es or user’s entertainment.

1. Press the GAME button.

2. According to the instruction displayed on screen, you can enjoy the game

using the /// and OK

button.

Note: Press the EXIT or BACK button to exit the game.

PIP CH+

PIP CH-

SWAP

MOVE

PIP

OPT+

SOURCE

PIP CH+

P

IP CH-

8/7/2019 UM-PVR9200T_600UK


GB31

User’s Manual

5.1 Time Sh

ited Recording (TSR)

You can perorm T

SR (Time Shited Recording) and other unctions similar to VCR unctions using the

playback control b

uttons while playing a prog

ramme.

The product automatically saves the programme in the embedded hard disk drive temporarily, so that

users can pause, p

lay, ast rewind, ast orward

, replay, etc. even while watching the currently broadcas

ting

TV programme.

1. Time Bar

I you press the PL

AY button while watching T

V, the time bar inormation will be displayed. Time bar

displays the current operation status, the time

gap between the broadcast

ing point and watching poin

t

and the amount o

temporarily saved program

me.

1. Operation sta

tus

4. Watching point

2. Watching po

int time (hh:mm:ss)

5. Broadcasting (Live) point

3. The amount o saved programme

6. Current time (hh

:mm)

2. Pause

I you press the PA

USE button on the remote control, the current program

me is paused. I you press th

e

PAUSE button once again, the programme is r

esumed rom that point.

Note: Pause mak

es the time gap or delay between the broadcasting (live

) point and watching point. The

time gap is equivalent to the period th

e programme was paused. O

perations like slow motion and

ast rewind also make the time gap. Press the STOP button to go to

the live programme.

5. PVR

8/7/2019 UM-PVR9200T_600UK


GB32

User’s Manual

5. PVR

3. Fast Rewind t

o Previous Scene

Press the FAST REWI

ND button on the remote co

ntrol to watch the scene passed by. Each time you press

the FAST REWIND button, the rewind speed increases. ( x2, x4, x16, x32, x64)

I you press the PLAY

button, the ast rewind ope

ration stops and the programme is played at normal

speed.

Note: You can ast rewind back to the start poin

t. I you reach the start point while rewinding, the

programme is automatically played at normal speed rom that point.

4. Fast Forward to the Next Scene

Press the FAST FORW

ARD button on the remote control to ast orward the p

rogramme. Each time you

pressthe FAST FORW

ARD button, the speed increases. ( x2, x4, x16, x32, x64)

I you press the PLAY

button, the ast orward operation stops and the progra

mme is played at normal

speed.

Note: You can use the ast orward operation on

ly when there is a time gap between the current

watching point and the broadcasting (live

) point caused by some previous operations such as

pause, slow m

otion or ast rewind. You can ast orward to the current

broadcasting point. I the

watching point reaches the broadcasting (live) point, the programme is automatically played at

normal speed

.

5. TSR Recording

Press the RECORD bu

tton on the remote control to record the current progra

mme immediately. While the

time shit operation records the programme temporarily, this record operatio

n records the programme

permanently so you can playback the recorded programme at any time. For m

ore inormation about

recording, reer to 5.2 Recording.

Adjusting the Recording End Time

Press the RECORD bu

tton while recording to adjust the recording end time. Y

ou can adjust the recording

end time by -/+10 minutes using the / button, and then press the OK button to change the recording

end time and hide th

e message screen.

8/7/2019 UM-PVR9200T_600UK


GB33

User’s Manual

5. PVR

5.2 Recording

Using the built-in hard disk drive, you can reco

rd a programme without an

external media device such

as

a VCR.

1. General Re

cording

Press the RECORD

button on the remote control to record the

current programm

e instantly. You can select the point you want

to record using th

e / button. Press the RECORD button to start

instant recording rom that point.

To record another

channel, change channels w

hile recording and

press the RECORD

button again. You can record up to two channels

simultaneously. W

hile doing so, you can pero

rm TSR (Time Shited

Recording) and view the programmes on air.

I you press the ST

OP button while recording two other channels,

you will be promp

ted to select a recording you wish to stop.

I a reserved recor

ding is about to start while r

ecording two other

channels already, you will be prompted to stop one o the currently

recording channels.

Note:

•

Ensure that th

ere is enough ree space be

ore recording. I the

ree space on the hard disk drive is insu c

ient, recording will

stop. Recordin

g one hour o programme m

ay require up to

2 or 3GB o ha

rd disk space. The space or recording a 1 hour

programme m

ay dif er depending on the programme.

•

You can record radio programmes also.

2. Descrambling and Re-recording

You can descramb

le and re-record the recorde

d le.

1. Press the RECORD button at the point you

want to record while playback.

2. Press the STOP button to stop recording. A pop-up message will appear. Select Yes and press the O

K

button. Then the recording will stop but th

e playback will continue.

3. To nd new re

corded les in the play list, p

ress the PLAY LIST button.

8/7/2019 UM-PVR9200T_600UK


GB34

User’s Manual

5. PVR

5.3 Programme Playback in th

e Play List

You can playback the

recorded programme by pr

essing the PLAY LIST button. You can switch among

VIDEO(TV), AUDIO (radio) and Selected Files list

using the / button.

1. VIDEO/AUDIO

List

1. Select VIDEO/AU

DIO list using the / butto

n.

2. Select a program

me using the / button an

d press the OK

button to play th

e recorded programme.

3. Select the progra

mmes and press the GREEN

button to

select the recorded programmes. To unselect

the selected

programmes, pre

ss the GREEN button again.


mmes you want to delete using the GREEN

button and press

the RED button to delete th

e recorded

programmes.


mmes you want to move using the GREEN

button and press

the YELLOW button. Move the cursor to the

destination using

the / button and press the OK button. A pop-up will appear. Select Yes and pres

s

the OK button.

6. Each time you press the BLUE button, the sorting order o the recorded p

rogrammes change in the

ollowing sequen

ce: by descending time, by ascending time, by name.

7. Select programm

es you want to playback using the GREEN button and press the OK or PLAY button

to play the record

ed programmes. The programmes will be played in the selected order.

8. I you select prog

rammes using the GREEN button, the programmes you select will add to Selected

Files list automat

ically.

Note:

•

Move is inactivated in VIDEO/AUDIO list.

•

I you select or playback a split programme, o

ther split programmes are also selected or played back

continuously.

2. Selected Files List

1. Select Selected F

iles list using the / button.

2. All eatures are similar to those o VIDEO/AUD

IO list.

Note:

•

You also can play

back the recorded programme in Menu–

Record–Recorded Programme. Please reer to 7.1 Recorded

Programme.

•

You can playback

the programme currently b

eing recorded. For

more inormation

, reer to 5.2 Recording.

•

The playback icon will be displayed when the

programme is

being played.

•

The recording ico

n will be displayed when the programme is

being recorded.

•

Certain parts o the programme may blink when playing back a recorded programme in case the

recording mode is switched rom scramble to

descramble or vice versa.

8/7/2019 UM-PVR9200T_600UK


G

B35

User’s Manual

5. PVR

5.4 Chase P

lay

You can watch the programme rom the begin

ning as the rest o the programme is simultaneously being

recorded. While re

cording two channels simultaneously, you can perorm TSR (Time Shited Recording

)

using the playbac

k control buttons.

Note: You can playback the programme bein

g recorded ater it has been

recorded or at least 30

seconds.

5.5 Bookmark

You can jump to a

position directly using the bookmark in recorded programme playback. Use bookm

arks

to search position

s quickly and conveniently.

1. Adding a Bookmark

Press the ADD BO

OKMARK button at a certain position to set a

bookmark while p

laying back a recorded prog

ramme.

Note: The bookm

ark unction is only availab

le or recorded

programm

es.

1. Bookmark List

1. Press the BOO

KMARK LIST button ater adding a bookmark.

2. Select the location you want to view using

the / button and

press the OK button to start playback rom

the location you

have selected.

3. Press the BOO

KMARK LIST button again to return to the play

bar.

4. To delete a location, select the location yo

u want to delete and

press the ADD

BOOKMARK button.

PIP C

H+

PIP CH-

SWAP

MOVE

PIP

OPT+

SOURCE

WIDE

8/7/2019 UM-PVR9200T_600UK


GB36

User’s Manual

5. PVR

5.6 Additional Time Shit Operations

You can perorm add

itional time shit operations

using the ollowing buttons

on the remote control.

1. Direct Jump

Press the PLAY butto

n while watching TV. I you press the / button, a mov

ing arrow will appear in the

progress bar. Move this arrow to a time point using the / button and then press the OK button to play

the programme rom

the speci ed time point. Yo

u can also move to the speci ed time point directly by

entering the time you want using the NUMERIC(

0-9) button while playing back a recorded programme.

2. Instant Repla

y

Press the INSTANT R

EPLAY button to jump back

and play rom that

location. When the replay has been completed th

e programme will

play rom the current point. Reer to 8.6 Miscellaneous Settings.

3. Commercial S

kipping 30 seconds

Press the COMMERC

IAL SKIP button jump ahead in a recording. You can use

the skip operation only

when there is a time gap between the current watching point and the broadcasting point while using the

ast orward operatio

n. I the time gap is less than 30 seconds, the programm

e is played rom the current

broadcasting point. Reer to 8.6 Miscellaneous Settings.

4. Slow Motion

Press the SLOW MOT

ION button to play the current programme in slow motion. Each time you press the

SLOW MOTION butt

on, the speed decreases (x 1

/2 , x 1/4, x 1/8). Press the PL

AY button to stop playing in

slow motion and return to normal speed.

5. Repeat Mode

You can select a spec

i c block within a recorded programme and play it back

repeatedly. Press the A-B

button to set the rst repeating position. Select t

he second position using the / button and press the

A-B button. Then the

programme plays back the selected block repeatedly. To stop the repeat mode, press

the A-B button while

repeating the selected bloc

k.

Press the STOP butto

n to stop playing the saved programme and watch the current programme on air.

PIP CH+

PIP CH-

SWAP

MOVE

PIP

OPT+

SOURCE

WIDE

8/7/2019 UM-PVR9200T_600UK


G

B37

User’s Manual

6. Progr

amme Guide

The programme g

uide displays programme in

ormation about each channel, based on the date and time.

You can also schedule your recording using th

e inormation given.

Note: Press the BACK, EXIT or GUIDE button to exit the guide screen.

6.1 Viewing Programme Guide Inormation

You can view the programme inormation o a

ll channels. Press the GUIDE

button.

1. Inormatio

n o the Programme G

uide Screen

The TV guide is displayed as ollows.

1. Channel and programme inormation

2. Icon

Split Programme

Displayed only when the programme is a split programme.

Serie

s

Displayed only when the programme is a series programme.

Rese

rvation

Displayed only i the programme is res

erved or recording.

Auto

tracking

Displayed only when the auto tracking

unction is perormed.

3. Group name

4. Indication o present time

5. Present date a

nd time

6. Video preview

window

7. Table date & time range

Note:

•

Auto tracking

can track the changes o th

e reserved programme and keep the reservation. Even

when the broadcasting time o the reserved programme is changed, y

ou can still record the reserv

ed

programme w

ith the auto tracking eature

.

•

Auto tracking, split and series reservation are enabled only when Reco

rding’s Start/End Time in th

e

menu is set to

On Time.

1

5

3

6

42

7

8/7/2019 UM-PVR9200T_600UK


GB38

User’s Manual

6. Progra

mme Guide

2. Using Progra

mme Guide

1. Move to previous/next programme within th

e same channel using the / button.

2. Move back 2 hou

rs or move 2 hours ahead w

ithin the same channel using the FAST REWIND or FAST

FORWARD butto

n.

3. Use the Instant R

eply and Commerical Skip b

uttons to move to move Bac

k or Forward 1 day.

4. Select a program

me and press the OK button

. Then you can watch the programme i it is on air or

reserve it i it is the uture programme.

5. Press the i button in the selected programme

to view the detailed inorm

ation (i available) o the

selected program

me.

3. Scheduling R

ecording

You can automatically schedule recording in the scheduled programme and pressing the OK button.


mme and press the OK button to complete

reservation. The reservation icon will be displayed.

2. Select the scheduled programme and press t

he OK button to

cancel reservatio

n.

3. I you select a split programme, a pop-up will appear. Press the

OK button.

4. I you select a series programme, a pop-up w

ill appear. Select

an option you want and press the OK button

.

6.2 Selecting

Channel Group

You can view programme inormation o the sele

cted channel list by groups.

1. Press the GUIDE button.

2. Press the RED bu

tton to display the channel list group.

3. Select a channel list group using the / button.

4. Move the cursor to the sub-group using the button, select a

sub-group using the / button and then press the OK button.

The programme guide or the selected chann

el list is displayed.

8/7/2019 UM-PVR9200T_600UK


G

B39

User’s Ma

nual

6. Programme Guid

e

6.3 Using T

ime Bar

You can quickly search the time zone using th

e time bar.


2. Press the GRE

EN button to display time bar.

3. Select the eac

h button using the / button and press the OK

button to move the time bar. I you press the button repeatedly,

the same ope

ration is repeated.

4. You can also u

se the FAST REWIND/FAST

FORWARD and

INSTANT PLA

Y/COMMERCIAL SKIP buttons on the remote

control.

5. Each button unctions as ollows.

E

xits the time bar.

Now

M

oves to the current program

me where the cursor is loca

ted.

M

oves back to the previous p

rogramme or 30 minutes be

ore.

M

oves orwards to the next p

rogramme or 30 minutes ah

ead.

M

oves back to 2 hours beore

.

M

oves orwards to 2 hours ah

ead.

Day

D

ay Moves back to one day b

eore.

Day

D

ay Moves orwards to one d

ay ahead.

6.4 Schedu

le

You can add or ed

it recording-reserved programmes using the schedule s

creen.

1. Press the GUID

E button.

2. Press the YELLOW button.

Note: For more inormation about how to ad

d or edit a

reservatio

n, reer to 7.2 Recording Sch

edule.

8/7/2019 UM-PVR9200T_600UK


GB40

User’s Manual

6. Progra

mme Guide

6.5 Finding P

rogrammes

You can nd the programme you want by entering the name and genre o th

e programme.


2. Press the BLUE b

utton to display the keyboard.

3. Enter the programme name on the keyboard

screen.

4. Select Previous/Next and press the OK butto

n to switch the

keyboard layout.

5. Select Find and press the OK button.

6. Select a program

me and press the OK button to watch or

reserve it.

Note:

•

I you want to n

d the programme by genre, select By Genre

and press the OK

button. Select the genre an

d press the OK

button to nd.

•

Each time you press the OPT+ button, the so

rting order o

the ound programmes change in the ollowing sequence: by

channel, by desc

ending time, by ascending time.

•

Found Programme List may dif er depending on the provided

programme inormation.

8/7/2019 UM-PVR9200T_600UK


G

B41

User’s Ma

nual

7. Record

7.1 Recorded Programme

1. Press the MENU button.

2. Select Record

using the / button and press the OK or

button.

3. Select Record

ed Programme using the

/ button and press

the OK or b

utton. The recorded program

me list appears.

Note:

•

The programme being recorded will be added to the recorded

programme list ater it has been recorded

or at least 30

seconds.

•

Press the i button to see the detailed inormation about the

programme y

ou have selected i provided

.

•

When two other reservations with auto tracking con ict, the reservation with the earlier start time

starts recording rst. I the reservations have the same start time, the one with the lower channel

number starts rst.

Split

Displayed only when the programme is a split pro

gramme.

Series

Displayed only when the programme is a series programme.

Conf ict

Displayed only i the programme was not recorde

d due to the con ict with other

reservations.

Error

Displayed only when the recording is stopped because o an unexpected erro

r.

Protect

Displayed when the c

hannel is protected rom deleting and editing.

Lock

Displayed when the c

hannel is a locked channel.

1. Selecting/Unselecting Recorded

Programmes

1. Select a programme and press the GREEN

button. You can select multiple programmes.

2. To unselect th

e selected programmes, pre

ss the GREEN button again.

8/7/2019 UM-PVR9200T_600UK


GB42

User’s Manual

7. Record

2. Deleting Recorded Programmes

1. Ater selecting reserved programmes using t

he GREEN button,

press the RED button.

2. Select Yes and press the OK button to delete

the recorded

programmes.

Note:

•

I the protect option o the programme is set to Enable, you

cannot delete th

e programme. Please reer to 6.5.4 Changing

the Attribute.

•

You can delete m

ulti programmes except or

the protected

programmes.

•

When Deleting R

ecordings please ensure tha

t only the recording(s) that you wish to Delete are

selected. Unselect any Recordings by pressin

g the Green button.

3. Trimming the Recorded Programm

e

1. Select a program

me and press the YELLOW button to trim the

recorded programme.

2. A pop-up will ap

pear. Select Trim and press the OK button.

3. You can trim the

recorded programme using

the ollowing

unctions.

Note: You can trim recorded TV (Video) channe

ls only.

Save

You can save the selected recording part as a dif erent le.

Select the starting point using the / button and press the

RECORD button. Select the ending point using t

he / button and

press the RECORD b

utton. Press the STOP butto

n. A pop-up will

appear. Select Save and press the OK button to save the selected

part. Select Reset and press the OK button to reset the edit.

Warning: This unc

tion will overwrite the origin

al recording.

8/7/2019 UM-PVR9200T_600UK


G

B43

User’s Ma

nual

7. Record

Delete

You can delete th

e selected recording part.

Select the starting point using the / button and press the RECORD button. Select the ending point

using the / bu

tton and press the RECORD button. Press the STOP button. A pop-up will appear. Select

Delete and press the OK button to delete the

selected part. Select Reset and press the OK button to r

eset

the edit.

Note:

•

You can selec

t several parts simultaneous

ly.

•

Ater selecting the point you want using the / button, you can view

the scene o the point you

select by pressing the OK button.

Split

You can split the recorded programme into se

parate recordings.

Select the point y

ou want to split using the / button and press

the RECORD button. Press the STOP button. A pop-up will appear.

Select Yes and press the OK button to split th

e selected point.

8/7/2019 UM-PVR9200T_600UK


GB44

User’s Manual

7. Record

4. Changing the Attribute

1. Select a program

me and press the YELLOW button to change

the attribute o the recorded programme.

2. A pop-up will ap

pear. Select File and press th

e OK button.

3. Select Programme in the File using the / button and press

the OK or button to display a keyboard on

the screen.Enter

the programme name on the keyboard. Select OK and press the

OK button to complete.

4. Select Protect in

the File using the / butt

on and press the

OK or button to change Enable/Disable. You have to enter a

password to cha

nge the status rom Enable to Disable.

5. Select Lock in th

e File using the / button and press the OK

or button to change Enable/Disable. You have to enter a

password to cha

nge the status rom Enable to Disable.

6. Ater editing, you have to select Save and pr

ess the OK button

to save your changes.

Note:

•

I the protect op

tion o the programme is set to Enable, you

cannot delete th

e programme.

•

I the lock option o a programme is con gured to Enable, you

have to enter a p

assword to playback the programme.

Tip:

The deault

password is 0000. I you have orgotten your password, please contact your local

product dis

tributor.

7.2 Recordin

g Schedule

You can set a progra

mme to record automatically in Menu-Record-Recording Schedule.


2. Select Record us

ing the / button and pre

ss the OK or

button.

3. Select Recording Schedule using the / button and press the

OK or button to display the reserved recording list on the

screen.

Note: You can sche

dule recording easily using the programme

guide. Reer to Chapter 6. Programme G

uide.

8/7/2019 UM-PVR9200T_600UK


G

B45

User’s Ma

nual

7. Record

1. Selecting/Unselecting Reserved

Programmes

1. Select a programme and press the GREEN

button. You can

select multiple programmes.

2. To unselect the selected programmes, press the GREEN button

again.

2. Deleting R

eserved Programmes

1. Ater selectin

g reserved programmes using the GREEN button, press the RED button.

2. Select Yes and press the OK button to delete the reserved programmes.

3. Adding a R

eservation

1. Press the YEL

LOW button to add a new reservation.

2. Select Chann

el and Date. Press the button to display channel and d

ate lists and select one item

using the / button and OK button. You can also select a channel using the NUMERIC(0-9) buttons.

3. Select Start/End Time using the / button and press the / butto

n to move back 1 minute or

move 1 minu

te ahead. To change the time using the NUMERIC(0-9) b

uttons, press the OK button

.

4. Select Repeat mode among ONCE, DAILY

, WEEKLY,

WEEKDAY(Mon-Fri) and WEEKEND using

the / button.

Once

Weekday (Mon-Fri)

Daily

Weekend

Weekly

5. Select Lock m

ode using the / button.

6. Select Save a

nd press the OK button to save the changes.

7. Select Cancel and press the OK button to

cancel the

reservation.

8. I the channe

l is locked, you will be prompted to enter the password t

o complete the reservation.

Note:

•

The recording schedule can be overlappe

d with up to two other prog

rammes.

•

The Power On/Of time can overlap the re

cording schedule.

•

The recording icon will be displayed when the programme is being re

corded.

•

Press the i bu

tton to see the detailed inormation about the programme you have selected i prov

ided.

Tip:

The dea

ult password is 0000. I you have orgotten your passwo

rd, please contact your local

product distributor.

8/7/2019 UM-PVR9200T_600UK


GB46

User’s Manual

7. Record

4. Sorting by Time/Name

Each time you press

the BLUE button, the sortin

g order o the reserved prog

rammes change in the

ollowing sequence: by descending time, by asc

ending time, by name.

5. Editing a Res

erved Programme

1. Select a program

me you want to edit and pr

ess the OK button.

2. For more inorm

ation about how to edit the inormation, reer

to 7.2.3 Adding a Reservation.

7.3 MP3

You can enjoy the m

usic or edit the MP3 list in M

enu–Record–MP3.

1. Press the MENU

button.

2. Select Record using the / button and pre

ss the OK or

button.

3. Select MP3 using the / button and press the OK or

button. The MP3

list appears.

1. Playing MP3

Select the le you w

ish to playback using the /

button and then press the PLAY or OK button. Press the

STOP button to stop

playing the current le. And press the PAUSE button to

pause the current le.

2. Downloading MP3 Files

You can download M

P3 les stored on the PC via Universal Serial Bus (USB). For more inormation, reer to

7.5 File Download rom PC.

8/7/2019 UM-PVR9200T_600UK


G

B47

User’s Ma

nual

7. Reco

rd

7.4 Digital

Album

You can view or edit the photos in Menu-Record-Digital Album.


2. Select Record

using the / button and press the OK or

button.

3. Select Digita

l Album using the / button and press the OK

or button. The digital album list appear

s.

1. Digital Image Browsing

Select a image yo

u wish to browse using the / // button and then press the OK button to enlar

ge

the image. Press the PLAY button to view photos as slide show. Move the

previous /next screen using

the

/ button.

Note:

•

Press the BACK button to thumbnail screen.

•

Press the EXIT button to exit the menu and return to the current prog

ramme.

2. Download

ing Photos

You can downloa

d photos (only JPEG les) stored on the PC via Universal Serial Bus (USB). For more

inormation, reer to 7.5 File Download rom PC.

8/7/2019 UM-PVR9200T_600UK


GB48

User’s Manual

7. Record

7.5 File Dow

nload rom PC

You can enjoy the m

usic and view the photos by

downloading the les rom

your PC with ‘Media-e linker’

programme. (USB cables used or external HDDs are purchasable.)

Follow the instructions to download les:

1. Double-click ‘Media eLinker Setup.exe’ on th

e CD-ROM to install the USB driver and application

programme.You

can also download the setu

p le rom www.humaxdigital.com.

2. Connect the USB on the product to the USB on the PC using a USB cable.

3. Double-click ‘Media eLinker.exe’ to start the USB application.

For more inormatio

n about how to use Media e

Linker, reer to the readme le on the CD-ROM.

PC

8/7/2019 UM-PVR9200T_600UK


G

B49

User’s Manual

7. Reco

rd

7.6 HDD Control

You can check th

e ree space o the hard disk

drive and ormat (erase) the

disk drive i necessary.

1. Press the ME

NU button.

2. Select Record using the / button and press the OK or

button.

3. Select HDD C

ontrol using the / button and press the OK or

button.

4. You can chec

k the ree, used, reserved an

d total space o the

HDD.

5. Select Forma

t and press the OK button to remove all the

recorded pro

grammes saved on the HDD

and initialise the

HDD.

6. Select Yes wh

en the ormat con rmation message appears and

enter a passw

ord to start ormatting the HDD.

Note:

•

The ormat d

eletes all the recorded programmes saved on the

HDD includin

g TV, radio, MP3s and photo

s.Formatting does not

delete the system les o the product.

•

A certain amount o space is reserved or TSR and PIP.

Tip:

The deault password is 0000. I you

have orgotten

your password, please contact the H

umax Customer

Helpline

.

7.7 Record

ing’s Start/End Time

You can set the s

tart/end time o recording.

1. Press the ME

NU button.

2. Select Record using the / button and press the OK or

button.

3. Select Recording’s Start/End Time using the / button and

press the OK or button.

4. Select the tim

e using the / button and press the OK button.

Note: Auto trac

king, split and series reserva

tion in the programme

guide are

enabled only when Recording’s Start/End Time is

set to On

Time.

8/7/2019 UM-PVR9200T_600UK


GB50

User’s Manual

8. Preerences

You can set censorship and all other items suitable or your environment.

Note:

•

Press the BACK or button to save the chan

ges and return to the previo

us menu. Press the MENU o

r

EXIT button to exit rom the menu screen.

•

You can easily select all menu items using th

e assigned number or each

menu.

8.1 Parental Control

You can set parenta

l control or each programm

e and change the password.

1. Press the MENU

button.

2. Select Preerences using the / button an

d press the OK or

button.

3. Select Parental Control using the / button and press the

OK or button.

4. When promptin

g message is displayed to as

k password, enter

the password using the NUMERIC(0-9) butt

ons.

Tip:

The deault password is 0000. I you ha

ve orgotten

your passw

ord, please contact your local product

distributor.

1. Censorship C

lassi cation

Censorship Classi cation allows you to block programmes according to the

age level you have set.

1. Select Censorsh

ip Classi cation using the

/ button and

press the OK or button.

2. Select the required age level using the / button and press

the OK button.

Note:

•

You have to enter the password to watch the programme which

is blocked by the age level.

•

Censorship Clas

si cation will only work i the required

inormation is sent by the Broadcaster.

2. Change Pass

word

You can change the

current password.

1. Select Change P

assword using the / but

ton and press the OK or button.

2. Enter New Password using the NUMERIC(0-9) buttons, select OK and press the OK button.

3. Enter the new p

assword again to con rm Ve

riy Password and select OK

and press the OK button.

Note: I you have c

hanged and orgotten your password please contact the Humax Customer Helpline.

8/7/2019 UM-PVR9200T_600UK


G

B51

User’s Manual

8. Pree

rences

8.2 Language Setting

1. Press the ME

NU button.

2. Select Preer

ences using the / button

and press the OK or

button.

3. Select Langu

age Setting using the / button and press the

OK or butt

on.

1. Audio/Sub

title Language

You can set the language or audio and subtitle.

1. Select Audio

/Subtitle Language using th

e / button and press the

OK or button.

2. Select a lang

uage using the / button and press the OK button.

2. Audio Prio

rity

You can select th

e priority o audio.

1. Select Audio

Priority using the / butt

on.

2. Select rom L

anguage and Dolby Digital using the OK or button.

3. Subtitle D

isplay

You can select to

display the subtitle automa

tically or not.

1. Select Subtit

le Display using the / bu

tton.

2. Select rom A

uto and Manual using the O

K or button.

Auto

Subtitles are displaye

d automatically in the prede ned subtitle language.

Manual

Subtitles are displaye

d in the language when you

select the subtitle language by

pressing the SUBTITLE button on the remote control.

4. Subtitle Font

You can select th

e subtitle ont .

1. Select Subtit

le Font using the / butto

n.

2. Select rom V

ariable and Fixed using the

OK or button.

8/7/2019 UM-PVR9200T_600UK


GB52

User’s Manual

8. Preerences

8.3 Time Set

ting

You can speciy the current time and Power On/

Of time.

1. Press the MENU

button.


d press the OK or button.

3. Select Time Setting using the / button and press the OK or button

.

1. GMT O set

You can set the GMT of set or the current time.

1. Select GMT Of set using the / button and press the OK or

button.

2. Select your GMT of set using the / button and press the OK

button. GMT is changed by 30 minutes to 1 hour.

Note:

•

The current time is set automatically whene

ver GMT of set

changes.

•

The time is dete

cted rom the Digital Transm

itter that you

receive the Digital channels rom. It is not possible to enter the

time.

2. Power On

You can set the time when the product is autom

atically powered on.

1. Select Power On using the / button.

2. Select Enable/D

isable using the OK or bu

tton.

Enable

Uses Power On and sets the

Power On time.

Disable

Does not use Power On.

3. When you have selected Enable, enter Chan

nel No. and Time

using the NUMERIC(0-9) buttons and select OK and press the

OK button.

3. Power O

You can set the time when the product is autom

atically powered of .

1. Select Power Of using the / button.

2. Select Enable/D

isable using the OK or bu

tton.

3. When you have selected Enable, enter Time

using the NUMERIC(0-9) buttons, select OK and press t

he

OK button.

Note:

•

Once Power On/Of is speci ed, it is repeated everyday.

•

You can set the time when the product is au

tomatically powered on/of

overlapped with a recording

schedule.

8/7/2019 UM-PVR9200T_600UK


GB53

User’s Manual

8. Pree

rences

8.4 A/V Co

ntrol

You can set the a

udio or video output contro

l.

1. Press the ME

NU button.

2. Select Preerences using the / button

and press the OK or

button.

3. Select A/V Control using the/ button

and press the OK or

button.

1. TV-SCART

You can set the T

V SCART output.

1. Select TV-SC

ART using the / button a

nd press the OK or button

.

2. Select an option among CVBS, RGB and S-Video using the / button and press the OK button.

2. VCR-SCAR

T

You can set the V

CR SCART output.

1. Select VCR-S

CART using the / button

.

2. Select rom C

VBS and S-Video using the OK or button.

3. Audio Output

You can set the t

he audio output.

1. Select Audio

Output using the / button.

2. Select rom S

tereo and Mono using the O

K or button.

4. Screen Ra

tio

You can set the a

spect ratio o your TV.

1. Select Screen Ratio using the / butto

n.

2. Select rom 4

:3 (Conventional TV) and 16:9 (Widescreen TV) using the OK or u button.

5. Display Fo

rmat

You can select th

e display ormat according to the TV screen ratio.

1. Select Displa

y Format using the / button and press the OK or b

utton.

2. I the screen ratio is set to 4:3, you can se

lect an option among 16:9 L

etter Box, 14:9 Letter Box and

Centre Cut-O

ut using the / button an

d press the OK button.

3. I the screen ratio is set to 16:9, this item will display Auto.

Note: I you have set the Screen Ratio to 16

:9 you may also need to adju

st your TV set to its 16:9/Auto

/Wide ormat.

8/7/2019 UM-PVR9200T_600UK


GB54

User’s Manual

8. Preerences

8.5 UHF Tun

ing

You can set the UHF tuning channel.

1. Press the MENU

button.


d press the OK or

button.

3. Select UHF Tuning using the / button an

d press the OK or

button.

Note:

•

The TV must be tuned to the product’s UHF channel, or you will

not be able to v

iew the channels.

•

I you are conne

cting to your TV via Scart th

ere is no need to

change any settings.

1. UHF Channe

l

You can select UHF channels or the TV. The cha

nnel range and requency change according to PAL

standard.

1. Select UHF Channel using the / button a

nd press the OK or button.

2. Select channel range based on the ollowing channel criteria using the / button and press the OK

button.

2. PAL

You can select the P

AL standard.

1. Select PAL using the / button and press th

e OK or button.

2. Select an option among PAL I, PAL G and PAL

B using the / button and

press the OK button.

3. UHF O set

You can adjust the ne tuning setting.

1. Select UHF Of s

et using the / button and press the OK or button.

2. Select a range b

etween -4 ~ + 4 using the / button and press the OK

button.

8/7/2019 UM-PVR9200T_600UK


GB55

User’s Manual

8. Preerences

8.6 Miscellaneous Settings

1. Press the ME

NU button.

2. Select Preerences using the / button

and press the OK or

button.

3. Select Miscellaneous Settings using the / button and press

the OK or button.

1. i-Plate Display Time

You can set the duration o the inormation box to be displayed.

1. Select i-Plate Display Time using the / button and press the OK o

r button.

2. Select an option between 1~20 seconds using the / button and p

ress the OK button.

Note: When it is set to Disable, the i-plate w

ill not be displayed when the channel is switched.

2. OSD Transparency

You can set the transparency o On Screen D

isplay.

1. Select OSD T

ransparency using the / button and press the OK or button.

2. Select an option among Disable, 25, 50 and 75 using the / button and press the OK button.

3. Option in Channel List

You can set whether or not to display the scr

ambled icon in channel list and i-plate.

1. Select Optio

n in CH List using the / b

utton.

2. Select On/Of using the OK or button.

4. Instant Re

play Time

You can make th

e current programme go ba

ck 7, 15 or 30 seconds.

1. Select Instan

t replay time using the /

button and press the OK or button.

2. Select an option among 7, 15 and 30 using the / button and pres

s the OK button.

8/7/2019 UM-PVR9200T_600UK


GB56

User’s Manual

9. Edit Channels

5. Commercial

Skip Time

You can skip 15,30, 60 or 120 seconds o the unwanted scenes.

1. Select Commercial skip time using the /

button and press the OK or

button.

2. Select an option among 15, 30, 60 and 120 using the / button and p

ress the OK button.

Note:

•

Press the BACK or button to save the changes and return to the previous menu, press the MENU or

EXIT button to exit the menu screen.

•

You can easily n

avigate all menus using the assigned number or each m

enu.

9.1 Edit Cha

nnel Lists

1. Press the MENU

button.

2. Select Edit Channels using the / button and press the OK or

button.

3. Select Edit Channel Lists using the / button and press the

OK or button

.

4. Press the OK or button in Group to select

the group o

channel list. Select the group using the /

button and press

the OK button.

5. Select a channe

l using the / button and press the OK

button. You can

select more than one channel. Select Delete/

Lock using the / button and press the OK button.

6. Select Select All/ Unselect All using the /

button and press

the OK button to select/unselect all channe

ls.

Note:

•

Press the TV/RA

DIO button to move to the TV or radio channel

list directly.

•

When the locke

d channel(s) is selected or all channels are

locked, Lock is switched to Unlock. When you select Unlock

and press the O

K button, locked channel is switched to an

unlocked chann

el.

Tip:

The deault password is 0000. I you ha

ve orgotten

your passw

ord, please contact your loc

al product

distributor

.

8/7/2019 UM-PVR9200T_600UK


GB57

User’s M

anual

9. Edit Channels

9.2 Edit Fa

vourite Channels

1. Press the ME

NU button.

2. Select Edit C

hannels using the / butt

on and press the OK or

button.

3. Select Edit Favourite Channels using the / button and press

the OK or button.

4. You will be p

rompted to select a avourite group. Select a

avourite gro

up to edit using the / bu

tton and press the OK

button.

Note: Press the

TV/RADIO button to move

to the TV or radio

channel list directly.

The icons or editing the avourite channel list are described in the ollow

ing table.

Add

Adds avourite channel.

Remov

e

Removes rom the a

vourite channel.

TV/RAD

IO

Switches between TV and radio channel list.

Fav.Gro

up

Changes avourite channel list group.

Move

Changes the order o

channels within the

avourite channel list.

Renam

e

Renames the name o avourite channel list.

Sort

Sorts channels by nu

mber or name in all TV/radio channel list.

Unselect All

Unselects all the sele

cted channel.

8/7/2019 UM-PVR9200T_600UK


GB58

User’s Manual

This chapter describes how to search or channels and other series o procedures.

Note:

•

Press the BACK

or button to save the changes and return to the previous menu. Press the MENU or

EXIT button to exit rom the menu screen.

•

You can easily s

elect all menu items using the assigned number or each

menu.

10.1 Automatic Search

I your product is connected to the aerial and te

levision, you can automatically search channels without

entering any other inormation.

1. Press the MENU

button.

2. Select Installation using the / button an

d press the OK or

button.

3. Enter the passw

ord using the NUMERIC(0-9) buttons.

4. Select Automatic Search rom installation m

enu using the /

button and press the OK or button.

5. Automatic chan

nel search begins.

Tip:

The deault password is 0000. I you have orgotten

your passw

ord, please contact your loc

al product

distributor.

1. Search

Wait while channel search continues. This may take a ew minutes.

1. While operating search, the cursor is located at Stop. Thereore,

i you press the OK button during searching

, the operation is

stopped and th

e channels ound until then will be displayed.

2. I search operation is successully completed and the channel

does not exist, press the OK button and try to reset the search

operation again

i necessary.

3. You can delete unnecessary channels rom the searched

channels. Selec

t the channels to delete and

press the OK

button. Then se

lect Delete and press the OK button. To delete

all channels, select Select All to select all ch

annels, select

Delete and press the OK button.

4. When completing channel search and deleting unnecessary channels, s

elect Save and press the OK

button to save the changes.

10. Insta

llation

8/7/2019 UM-PVR9200T_600UK


GB59

User’s M

anual

10. Installation

10.2 Manu

al Search

You can search channels manually by search

ing parameters, using the M

UX inormation.

1. Press the MEN

U button.

2. Select Installa

tion using the / button and press the OK or button.

3. Select Manua

l Search using the / butt

on and press the OK or bu

tton.

1. Channel

Enter the channel to search. When entering channel value, the appropria

te requency value is displayed.

1. Select Channel using the / button an

d press the OK or

button.

2. Select one o

channels using the / bu

tton and press the OK

button.

2. Frequency

Enter the reque

ncy to search directly. When

entering requency, the app

ropriate channel or the entered

requency is aut

omatically displayed on channel.

1. Select Freque

ncy using the / button and press the OK or button

.

2. Enter the req

uency using the NUMERIC(0-9) buttons and press the O

K button.

3. Network Search

I speci ed requency channel inormation a

nd other channel inormatio

n are provided together, the

channel belonging to another requency is a

lso searched.

1. Select Network Search using the / button.

2. Select Enable/Disable using the OK or

button.

8/7/2019 UM-PVR9200T_600UK


GB60

User’s Manual

10. Insta

llation

10.3 Deault Setting

Deault setting restores the product to the dea

ult settings.

Warning: Please n

ote that once you perorm deault setting, all data such as channel list and user

con gu

red data are deleted, no ino

rmation on the HDD will be lost.

1. Press the MENU

button.

2. Select Installat

ion using the / button and press the OK or

button.

3. Enter the passw


4. Select Deault Setting using the / butto

n and press the

OK or button.

5. Select Yes and press the OK button to resto

re all setting to

actory deault. Select No and press the OK or BACK button to

return to the previous menu.

6. Con rm again to start loading deault settin

g. Enter the

password using

the NUMERIC(0-9) buttons to perorm

restoring.

7. When completing the deault setting, press

the OK button

to automatically run the installation wizard. For detailed

inormation about the installation wizard, reer to Chapter 3.

Installation Wizard.

Tip:


your passw

ord, please contact your local product

distributor.

10.4 Antenn

a Power

Make sure to set th

e Antenna Power to On when you connect an active antenna to the ANTENNA IN

connector on the rear o the product.

1. Press the MENU

button.

2. Select Installat

ion using the / button and press the OK or

button.

3. Select Antenna

Power rom the installation

menu using the

/ button.

4. Press the OK or button to select On/Of .

On

5V power supply rom the active antenna cable.

O

No power supply.

Note:

•

Active antenna

is a portable or indoor antenna which needs power supply rom the product becaus

e it

does not have power cord or itsel.

•

The deault value is Of .

8/7/2019 UM-PVR9200T_600UK


GB61

User’s M

anual

In order to main

tain proper perormance o the product, it is essential to

have the most up-to-date

sotware. Visit th

e Humax website to check t

he latest news and newly released sotware versions.

http://www.humaxdigital.com

It is recommend

ed that you periodically che

ck or the availability o sotware update.

Important:

In order to receive Sotware

Updates Automatically you must have the product in

Standby mode at the time o

the Regular Auto Update.

11.1 OTA (Over the Air)

OTA, an abbreviation o Over–the-Air, is a standard or the transmission o sotware through a broadcast

system.

OTA is simply an

alternative method or dow

nloading sotware versions. However, the manuacturers

reserve the right or deciding the release o the sotware or their products by beaming the latest

sotware version

s over the air via aerial. The sotware update via aerial w

ill only occur under the ollo

wing

circumstances.

1. The equipm

ent should have appropriate

loader sotware. Caution: Please note that i normal loader

sotware is n

ot equipped, the product m

ay not be updated or operate properly ater sotware up

date.

2. The manuacturer decides to release the

sotware via a designated channel.

3. The equipm

ent must be tuned properly to the same aerial equivalen

t to that o the manuacture

r.

4. Update sotware when the signal streng

th and quality is high. I the signal strength and quality a

re not

recommend

able, perorm the sotware u

pdate later.

Caution:

•

Please be ca

reul to keep the power on a

nd the power cord plugged

in during sotware update. I the

power is of

during sotware update, atal damage may be caused to

the product.

•

Please be ca

reul not to pull out the sign

al line (co-axial cable) during sotware update. Update m

ay be

interrupted and the product may not op

erate.

Note:

•

Other unctions will not activate while sotware update takes place.

•

It may take 5~10 minutes to update sot

ware.

•

Scheduling operation cannot work durin

g sotware update.

1. I new sotware is ound when powering on

1. A message w

ill be displayed to notiy that new sotware is ound.

2. Select Yes and press the OK button to update the sotware.

3. Starts down

loading new sotware. Please wait until the update is completed.

4. When comp

leting the sotware update, the equipment is automatically powered of and on again.

To nd out w

hat changes have been made to the product when new

sotware is received please visit

http://www.humaxdigital.co.uk

11. Sotware Update

8/7/2019 UM-PVR9200T_600UK


GB62

User’s Manual

11. Sotware Update

11.2 Updating Sotware rom

Menu


2. Select Installation using the / button and press the OK or

button.

3. Enter the passw


4. Select Sotware Update using the / but

ton and press the

OK or button

.

Tip:


your password, please contact your local product

distributor.

1. Automatic U

pdate

You can set the pro

duct to nd HUMAX sotware update site and update so

tware automatically.

1. Select Automatic Update using the / bu

tton and press the

OK or button

.

2. Automatically search or new sotware. Sele

ct Cancel and

press the OK button to nish search.

3. When detecting sotware update, the ollow

ing result is

displayed. I ne

w sotware is not ound by a

utomatic update,

use manual update.

4. Select Yes and press the OK button to start updating. Select

No and press th

e OK button to return to the previous menu

without updating.

5. When completing the sotware update, the

product is

automatically p

owered of and on again.

8/7/2019 UM-PVR9200T_600UK


GB63

User’s M

anual

11. Sotware Upda

te

2. Manual U

pdate

You can perorm

manual update using know

MUX inormation.

1. Select Manu

al Update using the / button and press the

OK or but

ton.

2. Select Chan

nel using the / button and press the OK or

button.

3. Select the channel number using the / button and press

the OK or button.

4. Select Frequ

ency using the / button and press the OK or

button.

5. Enter the re

quency using the NUMERIC

(0-9) buttons.

6. Select Searc

h and press the OK button to search sotware.

7. Existing new

sotware will show. I new sotware does not

exist, press the OK button to return to th

e manual update

menu.

8. Select Yes and press the OK button to st

art updating. Select

No and pres

s the OK button to return to

the previous menu.

9. Perorms sotware update. Please wait u

ntil it is completed.

10. When comp

leting the sotware update, the product is

automatically powered of and on again

.

3. Regular A

uto Update and Search Time

You can speciy the regular auto update and

search time. Regular auto u

pdate is started in standby m

ode.

1. Select Regular Auto Update using the

/ button and press

the OK or button.

2. Select Enable/Disable and press the OK

button to set or unset

the search time automatically.

3. When selecting Enable, set Search Time

using the

NUMERIC(0

-9) buttons and select OK and press the OK

button.

4. I you wish t

o cancel the entered time, select Cancel and press

the OK butt

on.

Note: Regular auto update will only work w

hen i the product is

in Stand

by at the time the Regular is

set.

8/7/2019 UM-PVR9200T_600UK


GB64

User’s Manual

11. Sotware Update

11.3 Sotwa

re Update rom P

C

You can connect your product to the PC directly and update your sotware by transerring the new

sotware rom the PC.Follow these steps to dow

nload new sotware rom PC to this product.

1. Download the new sotware le equivalent or this product model rom

our website(http://www.

humaxdigital.com).

2. Download and

install the download tool rom our website.

3. Connect your P

C to this product with an RS

-232C serial cable.

4. Execute the ins

talled download tool and o

llow the instructions provided.

5. Power On/Of t

o start operating.

RS-232C

RS-232C

PC

5le

8/7/2019 UM-PVR9200T_600UK


GB65

User’s M

anua

You can view all system inormation, signal detection and Common Inte

race.


2. Select Syste

m using the / button and press the OK or

button.

12.1 Statu

s

You can view sy

stem inormation.

Select Status using the / button and pre

ss the OK or button.

12.2 Signal Detection

You can view th

e signal strength and signal quality o the channel that is currently on AV.

Select Signal Detection using the / button and press the OK or bu

tton.

12.3 Common Interace

You can view th

e current status o the CI-Mo

dule.

1. Select Common Interace using the / button and press the OK or button.

2. Select Slot and press the OK or button. I Common Interace is ava

ilable, you can view slot

inormation

.

Note: The disp

layed inormation about a C

ommon Interace may dif er depending on Common Interace

type.

12. Sys

tem

8/7/2019 UM-PVR9200T_600UK


GB66

User’s Manual

13.1 Menu Map

13. Appendix

Record

1 Parental Control

2 Language Setting

3 Time Setting

4 A/V Control

5 UHF Tuning

6 Miscellaneous Set

tings

1 Recorded Program

me

2 Recording Schedu

le

3 MP3

4 Digital Album

5 HDD Control

6 Recording’s Start T

ime

7 Recording’s End Ti

me

Installation

1 Automatic Search

2 Manual Search

3 Software Update

4 Default Setting

5 Antenna Power

Preferences

Edit C

hannels

1 Edit Channel Lists

2 Edit Favourite Cha

nnels

Sy

stem

1 Status

2 Signal Detection

3 Common Interface

67 alrt

8/7/2019 UM-PVR9200T_600UK


GB6

User’s M

anua

13. Appendix

13.2 Trouble Shooting

Beore contacting your local service centre, please read the tips below c

areully. I the problem persists

ater completin

g the ollowing procedure, p

lease contact your local product distributor or service ce

ntre

or urther instructions.

1. No messag

e displayed on the ront panel. (The product will not switch on.)

• Check the main power cable and make

sure it is plugged into a suitable power outlet.

• Check that the mains supply is switche

d on.

• Check that the power switch is on at th

e rear o the product. (where applicable)

• Connect the power cable to a dif erent power outlet.

2. No picture on TV set

• Make sur

e that the product is powered

on and in operation mode. (P

ress the STANDBY button)

• Make sur

e that the AV cable is rmly co

nnected to the TV.

• Make sur

e that the antenna cable is properly connected to the produ

ct.

• Check the brightness level o the TV.

• Check i the channel is currently on air. Contact the broadcaster to en

sure that the channel is running.

• Press the

SOURCE button i the produc

t is in external input mode.

3. Poor picture/sound quality

• Install the antenna in an obstacle-ree place.

• Make sur

e there is no mobile phone or microwave oven near the pro

duct.

• Adjust th

e antenna direction to get the

better picture.

• Set the antenna power in menu to On, i you use the active antenna to improve the reception. (where

applicable)

4. No or poor sound

• Check that your AV cable is connected correctly.

• Check the volume levels o your TV set and the product.

• Check i the product or TV is on mute.

• Check au

dio type or soundtrack option

in the AV menu.

5. Remote control does not operate.

• To contro

l the product, the top end o the remote control should point directly towards the receiving pa

o the product.

• Remove and reinsert the batteries in th

e remote control.

• Replace t

he batteries in the remote control or a new set.

• Set the re

mote control rom TV mode t

o DTV mode, i you use the un

iversal remote control.

6. Cannot ma

ke reservations.

• Check that no previous reservations are con icting with the new reservation.

• Check that the product is switched on at the time o the reservation.

7. No password inormation is given.

• The deault password is always 0000.

8. Channel se

arch does not work.

• Make sur

e that the antenna is connected correctly.

• Use the a

ppropriate antenna capable o

receiving VHF or UHF channels or your area.

9. Cannot update new sotware.

• You can g

et an update. I the product d

oes not show a message requ

esting update, that means no

sotware is available.

8/7/2019 UM-PVR9200T_600UK


GB68

User’s Manual

13. Appendix

10. Cannot watch

scrambled channels.

• Check that y

ou have the appropriate CI-M

odule. Reinsert the CI-Module

and make sure it initializes

correctly.

• Check in the

menu that the product is detecting the CI-Module.

• Check in the

menu that you have a valid and working subscription to th

e channels you wish to view.

• Ensure that the CI-Module is not damaged

.

11. Cannot watch

pay channels.

• Check in the

menu that you have a valid and working subscription to th

e channels you wish to view.

• Contact you

r network operator or more inormation.

12. Cannot record

progammes.

• The hard dis

k is ull. Delete unnecessary programmes and make space or new recording.

• Check i reco

rding is overlapped with another channel. Stop the current

recording or wait until the

recording is nished.

13. Cannot opera

te the TSR (Time Shited Re

cording).

• The TSR may

not be available during the recording. Wait until the record

ing is nished.

• Delete unne

cessary programmes and mak

e space or new recording.

14. The product m

akes a humming noise.

• The noise is rom the an; the hard disk is o

perating normally. This kind o

noise is inevitable but seldo

mly

noticeable.

15. Cannot playback.

• To play back

the recorded le o a scrambled channel, use the Smartcard. In case it has been a long tim

e

since you last recorded, this may not work

. Contact the product distribu

tor.

• The signal during the recording may be weak or the hard disk too ull.

16. Cannot chang

e channel while recording.

• Certain chan

nels may not be changed due to restriction o the tuner typ

e.

17. How can I receive new channels?

To receive new

channels please perorm an

Automatic search in the Ins

tallation menu and they will be

added to the channel list, please reer to th

e Installation section o your manual. I channels change

position you w

ill need to carry out a Deault Setting in the Installation menu :

1. Press MEN

U button.

2. Select Installation and press OK button.

3. Enter your password (Deault = 0000)

4. Select Deault Setting and press OK button.

5. Select YES

and press OK button.

6. Enter your password (Deault = 0000)

Note: The receiver will then restart and search or the channels again.

Important:

Wh

en you carry out a Deault setting no inormation on you

r HDD (recordings) will be

rem

oved. You will need to setup any schedules and any Favourites list you have created.

18. There is picture but no sound on my PVR

.

• Make sure th

e volume on the PVR and TV is up. Check that the PVR and the TV are not set to Mute. Ma

ke

sure that the

Scart cable to the TV set is co

nnected to the “TV” scart connection on the back o the PVR.

19. My remote co

ntrol does not have all o the unctions that are displayed in the User Manual.

• The PVR rem

ote has a slide down section on the bottom third o the rem

ote where additional buttons are

available.

69ual

s on:

te

il

m

put

(or

he

8/7/2019 UM-PVR9200T_600UK


GB6

User’s M

anu

13. Appendix

20. Where is th

e USB connection on my P

VR to connect to my PC?

• The right section o the ront display has a door that will drop down where the USB connection is.

21. When I try to edit a recording I am un

able to use the 6 unction buttons on the bottom let o

the screen.

• To use th

ese buttons press the PAUSE b

utton on the remote control, then use the arrows to naviga

te to

the unction buttons.

22. I am trying

to download the sotware

via my PC but it will not st

art.

• When yo

u receive the message ̌°Waiting or Humax connectioną̌ on

your PC, make sure that the cables

rom the PC to the PVR are connected, and then power the PVR on rom the rear ON/OFF switch.

23. I get a message “E-OS” (or E-05) on th

e ront display every morn

ing.

• This message will appear when the PVR has tried to download the so

tware automatically but the

downloa

d has been corrupt or ailed. To resolve the issue see the instructions on how to carry out a

Deault S

etting. When the update is released again the PVR will upda

te automatically.

24. The Install

ation menu is greyed out w

hen I access the menu.

• It is not p

ossible to access the Installation menu when you are playin

g back a recording or when a

recording is in progress. You will need to stop the playback/recording to access the menu.

25. When I swi

tch my PVR on I receive the

E-AC error message.

• This error is caused by corrupt Application sotware; see the Sotware Download section or more

inormation.

26. When I access the menu I no longer have a record icon in the me

nu, instead the menu options

start with P

reerences and Games appear at the bottom?

• When the recording icon does not app

ear in the menu then the HDD

has not initialised on start-up

.

Power of

the PVR rom the rear ON/OF

F switch or 2 minutes and then power on again. I the record

option is still no longer available please contact the Customer Helpline.

27. How do I change channels on the PVR

?

There are se

veral ways to change chann

els, see the Channel Change

instructions or more inorm

atio

1. Enter the

channel number using the numeric keypad on the remote control.

2. Using the CH+ and CH- buttons on the remote.

3. Press the

OK or LIST button on the rem

ote to display the channel lis

t, use the or arrows to na

vigat

through the list, press OK to change to

the channel you require

28. The Time o

n my PVR is not correct.

• Go to ME

NU? PREFERENCES? TIME SETTINGS menu and change the G

MT OFFSET in 1 hour intervals unt

the corre

ct time is displayed. I the time is only several minutes incor

rect then this may be an issue

rom

the trans

mitter as the time is detected rom the Digital Signal.

29. When my P

VR is connected I am not a

ble to receive any/all o the analogue channels on my TV.

• Check that you have a RF (coaxial) cable connected rom the TV/VCR output on the PVR to the aerial inp

o your TV set. I you not receiving all o

the analogue channels then access the MENU? PREFERENC

ES?

UHF TUN

ING menu and change the UH

F Channel setting to a dif erent number than 36 as this num

ber (

a numbe

r close to 36) may be used or the analogue channel.

30. My EPG tak

es a long time to load each time I switch the PVR on.

• The PVR does not store the EPG inorm

ation in standby or powered o

f , instead it rereshes the

inormation each time you switch on. T

he time take to populate all o

the inormation may depend

on t

channel you are tuned to, it is recommended to go to BBC 1 where the inormation will be downlo

aded

quicker.

8/7/2019 UM-PVR9200T_600UK


GB70

User’s Manual

13. Appendix

31. I receive the m

essage “Antenna Power has short-circuited”.

• To resolve th

is problem please access MEN

U? INSTALLATION (enter your password as 0000 i you have

not

changed it), then switch the Antenna Pow

er option to OFF, nally Exit th

e menu and the message will no

long be disp

layed.

32. How to I recei

ve new channels?

There are 2 wa

ys to receive new channels:

• Carry out an

Automatic Search (instructions)

• Carry out a Deault Setting (instructions)

33. I have receive

d Analogue channels on m

y exiting TV without problems but I am not receiving

any/all o the Digital channels?

• The Analogue and Digital channels will no

t be sent in the same manor a

nd at times will be sent rom

dif erent transmitters. You cannot compar

e the Analogue channels signal/quality to the Digital chann

els.

Please check that you are in a Freeview co

verage area (www.dtg.org.uk or www.reeview.co.uk). You m

ay

be required to have your exiting aerial upgraded to receive digital channels.

34. When I press the TEXT or RED button the digital Telextext/Interactive menu does not appear?

Follow the steps below:

• Check i the acility is working on a dif erent channel and then try the ch

annel you wish to use

• Press GUIE o

r MENU and then EXIT and then ater 10 seconds try to unc

tion again

• Power of th

e PVR or 30 seconds and then

restart it and try the acility a

gain

35. I am unable to access the EPG when I am

playing back a recording

• The EPG is n

ot available when playing a re

cording, stop the recording and go to a live TV channel whe

re

you will be a

ble to access the EPG

36. I am unable to use PiP (Picture in Picture

) when recording or playin

g back a recording?

• The PiP acility is not available when recor

ding or playing back a recording.

37. When I try to playback a recording I am unable to see it on the ull screen, instead it only play

s

back in the sm

all thumbnail at the top o

the screen.

• When you access the Recorded Programm

es menu and press play on th

e recording you wish to view,

press the EX

IT button on the remote control to see the recording on the

ull screen.

B71

ual

ot

8/7/2019 UM-PVR9200T_600UK


GB

User’s M

anu

13. Ap

pendix

13.3 Error Message

Error messag

e

Possible causes

What t

o do

No or bad sig

nal

The aerial is not pointin

g properly.

Adjust a

erial.

Check the cable rom the aerial. I you c

anno

resolve the problem, you may need to h

ave

your aerial and installation tested by a

proessional.

The channel is

scrambled or

not

available.

The channel has signal, but no audio or video.

The channel is deleted by the broadcasting

company.

The channel is or data broadcasting.

(Cannot watch the chan

nel in usual way.)

Check i the channel is currently on air.

The audio is n

ot

available.

The channel has signal, but no audio.

Press th

e SOUNDTRACK button to check i

the channel has audio.

CI-Module is not

installed./ Inv

alid

CI-Module

CI-Module is not installed.

CI-Module is not properly inserted.

CI-Module is broken.

Install p

roper CI-Module.

Pull out

the CI-Module and plug it in.

Replace

CI-Module.

8/7/2019 UM-PVR9200T_600UK


GB72

User’s Manual

13. Appendix

13.4. Speci cation

Tuner & Channe

l

Input Connector

IEC

169-2 emale

Frequency Rang

e

51 MHz to 858 MHz

Signal Level

-70 to -10 dBm

Demodulation

OF

DM

Mode

2K

, 8K

FEC mode

1/2, 2/3, 3/4, 5/6 & 7/8

Guard Intervals

1/4, 1/8, 1/16 & 1/32

MPEG Transport Stream A/V Decoding

Transport Stream

MP

EG-2 ISO/IEC 13818

Pro le Level

MP

EG2 MP@ML

Input Rate

15 Mbit/s Max

Aspect Ratio

4:3

, 16:9

Video Resolution

720x576, 720x480

Audio Decoding

MP

EG/MusiCam Layer I & II

Audio Mode

Sin

gle /Dual mono/ Stereo /Joint s

tereo

RF-Modulator

RF/Loop-throug

h Output Connector

IEC

169-2 male

Frequency

470 ~ 862 MHz

Output Channel

CH

21 ~ 69

TV standard

PAL I/G/B

Preset Channel

CH

36

A/V & Data In/Out

Video

RC

A/TV SCART/VCR SCART Video O

utput (CVBS, S-Video, RGB)

Audio L/R

RC

A/TV SCART/VCR SCART Volume and Mute Control

(Re

solution:20bits DAC, MAX. 2Vrm

s)

RS-232C

9 P

IN Male Socket

B73

nual

8/7/2019 UM-PVR9200T_600UK


GB

User’s M

an

13. Ap

pendix

S/PDIF

Digital Audio Output, Fiber-Op

tic (Resolution: 20bits)

USB

USB 2.0 Device (connectable to

the USB o PC)

Power Supply

Input Voltage

90-250V a.c., 50/60Hz

Type

Switching Mode Power Supply (SMPS)

Power Consu

mption

Operation - Max 28W

Standby - Max 11W

Protection

Separate internal use & Lightn

ing protection

Physical Speci cation

Size

380 mm*78 mm*281 mm

Weight (Net)

3.7kg

Operating Temperature

0 ºC to +45 ºC

Storage Temperature

-10 ºC to +70 ºC

e k

. rs

. r. R.

n

8/7/2019 UM-PVR9200T_600UK


GB74

User’s Manual

13. Appendix

13.5 Glossa

ry

1. Aerial

A device that collects and ampli es electro

magnetic waves. Also called

“Antenna”

2. Coaxial cable

A specially designed and shields cable that can transport signals with high requency

3. Frequency

The property o a signal measured in cycle

s per second (=Hz).

4. FTA (Free- To-Air)

An unscramble

d broadcast allowing custome

rs to view channels or services

without paying any subscription.

5. HDD (Hard Disk Drive)

The primary computer storage medium, w

hich is made o one or more

aluminum or glass platters,

coated with a erromagnetic material

6. MUX

The transmitte

r/requency/channel where the programme provider/operator transmit a package o

digital channe

ls/services. Usually there are

several MUX requencies with dif erent or same content.

7. Network

The collection o channels/services that a programme provider/operator o

f er. These services may be

transmitted ro

m one or several MUXes. In th

e transmitted data stream the operator may transmit a service

inormation table(network inormation) that

inorms the Product about all available services in the netw

ork

8. OSD (On Scre

en Display)

OSD displays t

he basic inormation necess

ary or the users to con gure monitor or TV settings. OSD

inormation m

ay include brightness, contrast, tuning, RGB adjustment, and screen size and position

9. OTA (Over The Air)

A standard or

the transmission o sotware or equipment, through a b

roadcast system. Manuactu

rer

reserve the rig

ht or deciding the release o

the sotware or their products.

10. PIP (Picture In Picture)

A unction tha

t allows you to display 2 dif erent TV channels (or TV inputs) on one screen.

11. PVR (Persona

l Video Recorder)

Video recorder

that can record and play bac

k programmes directly using

the embedded hard disk drive(s)

12. RF (Radio Frequency)

Television signals are modulated onto RF sign

als and are then demodulated

by your television’s or STB’s tu

ner

13. SCART

A 21-pin connector standard to connect tw

o pieces o Audio-Visual equipment such as a TV and a VCR

Each device w

ill have a 21-pin emale conn

ection; a cable with male co

nnection at both ends is used

or connecting

the devices.

14. S/PDIF (Sony/Philips Digital Interace o

rmat)

A standard or

mat or the transer o digita

l audio signals. It allows the transer o digital audio betw

een

two devices w

ithout any conversion to and

rom analogue, which could

degrade the signal quality.

15. Trick-Play

Pause, Fast Forward/Fast Rewind, Slow Mo

tion, Instant Replay, Comme

rcial Skip, Repeat A-B.

16. TSR (Time Shited Recording)

A unction tha

t record the present program

me temporarily to support trick-play.

GB75

nual

ide

8/7/2019 UM-PVR9200T_600UK


G

User’s M

a

13. Ap

pendix

13.6 Serv

ice and Support

You can get in

ormation such as a troubleshooting guide, sotware upg

rades and product support gui

rom the ollow

ing web sites and call cente

r (Hotline).

Important:

in the UK we want customers to contact our Helpline and NOT go to the retailers.

UK

Tel:

0870 247 8800

Opening Hours:

Mon-Fri 09:00-18:00 (excludes Bank Holida

ys)

E-mail:

[email protected]

Website:

www.humax-digital.co.uk

Language:

English

Germany

Tel:

01805-778870

(€ 0,14/Min)

Opening Hours:

Mo-So 8:00-23

:00 Uhr, Sa-So. 8-20 Uhr

E-mail:

support@hum

ax-digital.de

Website:

www.humax-digital.de

Language:

Deutsch/English/Turkish

Australia

Tel:

1800 613 011

Opening Hours:

Mon- Fri 9:00-17:30

E-mail:

techinoau@h

umaxdigital.com

Website:

www.humaxd

igital.com/australia

Language:

English

Italia

Tel:

899 100 080 (€1+ VAT/min)

Orario:

Lun.-Ven. 8:00

-18:00

Mon-Fri 8:00-1

8:00

Lingua:

Italiano

8/7/2019 UM-PVR9200T_600UK


GB76

User’s Manual

13. Appendix

Sverige

Tn:

+46 (0)550 85527

Öppettider:

Mån-re 08:00-16

:30

Språk:

Svenska/engelska

Suomi

Puh:

09 56186366

Aukioloajat:

ma-pe 8:00-16:00

Kieli:

suomi/englanti

Austria

Tel:

0820 400675 (€0,14/min)

Opening Hours:

Mon-Sun 8:00-23

:00

E-mail:

[email protected]

Website:

www.humax-digital.de

Language:

Deutsch/English/Turkish

Note: For hardware repair, please visit our website.

8/7/2019 UM-PVR9200T_600UK


um-pvr9200t_600uk

Documents