ultra-premium disc brake pads · 2020. 10. 22. · benefit: alerts driver when pad life is reaching...
TRANSCRIPT
-
A D V I C S A F T E R M A R K E T . C O M
For three decades, ADVICS ultra-premium braking and chassis components have set the standard of excellence in the aftermarket. ADVICS ultra-premium disc brake pads are developed from advanced ceramic friction technology. Master engineering results in the aftermarket’s best performing ceramic brake pads that provides superior stopping power and peak performance capabilities.
ADVANCED CERAMIC FRICTION TECHNOLOGY
ULTRA-PREMIUM DISC BRAKE PADS
PADS | ROTORS | MASTER CYLINDERS | WHEEL CYLINDERS | BOOSTERS | CALIPERS
-
A D V I C S A F T E R M A R K E T . C O M
3 2
1
4
5
46% longer pad life than
the OE product
46-51% less noise than
competitive products
100% same pedal feel as
the OE product
1
2
3
4
5
FEATURES AND BENEFITS:
FEATURE: Industry-Leading Friction TechnologyBENEFIT: Produces quiet, smooth, safe stopping with reduced noise and more reliable braking systems
FEATURE: Advanced Slots and ChamfersBENEFIT: Absorb vibration, reduce noise and provide an excellent cost-per-mile value
FEATURE: ProprietaryVehicle-SpecificFormulationsBENEFIT: Optimal performance and heat dissipation, promoting extended pad and rotor life
FEATURE: Steel Backing Plates Undergo a Corrosion-Resistant Treatment BENEFIT: Ensures backing plate rigidity throughout the life of the brake pad
FEATURE: Mechanical Wear Indicator and Hardware Kits (where applicable)BENEFIT: Alerts driver when pad life is reaching its end; Provides technician with the parts needed to get the job done
MINIMAL PAD WEAR
1.0.9
OE ADVICS COMP 1 COMP 2
.7
1.3
BAD
GOOD
SAE J2707 - Wear Test Procedure Pad Wear: mm/3,700 stops
CONSISTENT PEDAL FEEL
BAD
GOOD OE ADVICS COMP 1 COMP 2
.08 .08
.25
.11
SAE J2522 - Dynamometer Global Brake Effectiveness
Pedal Feel Variation (25mph-125mph)
HEADQUARTERS: 1650 Kingsview Drive, Lebanon, OH 45036 TECHNICAL CENTER: 45300 Polaris Ct., Plymouth, MI 48170
LOW NOISE LEVELS
OE ADVICS COMP 1 COMP 2
9.110.8
22.2
19.9
SAE J2521 - Squeal Noise Test Procedure Percentage Noisy Stops > 70dB
BAD
GOOD