u4 assig.3 first 2011 (mechanical) new.doc last new - w-signature
TRANSCRIPT
-
7/28/2019 U4 Assig.3 First 2011 (Mechanical) New.doc LAST NEW - W-Signature
1/7
Sharjah Institute of TechnologyAssessment Activity Front Sheet
(This front sheet must be completed by the STUDENT where appropriate and included with the work submitted for assessment)
Students
Name:
Assessors
Name:
ModhafarM.Mohammad
Date Issued: 29thMay.2011Completion
Date:5thJun. 2011 Submitted on: / /
Qualification BTEC First Certificate in Engineering
Unit No.: 4 Unit Title: Mathematics for Engineering Technicians
Outcome No. : 2Outcome
Title:
Be able to use an electronic scientific
calculator.Assignment
No.:3 Assessment
Title:
Be able to use an electronic scientific
calculator.Part: 1 of 1
In this assessment you will have opportunities to provide evidence against the following criteria.
Indicate the page numbers where the evidence can be found.
Criteria
refer
ence
To achieve the criteria the evidence must show that the
student is able to:
Tick if
Met
Page
Numbers
P6
Perform calculations using the basic and special
functions keys of an electronic scientific calculator.
D2
Carry out chained calculations using an
electronic calculator.
Declaration
I certify that this assignment is my own work, written in my own words. Any other persons work
included in my assignment is referenced / acknowledged.
Students Name: Students Signature: Date:
Internal Verifiers approval to use with students
IVs Name:Tariq Ahmed Abulnasr
IVs Signature: Date:
Criteria Achieved
P6 D2
Front Sheet
-
7/28/2019 U4 Assig.3 First 2011 (Mechanical) New.doc LAST NEW - W-Signature
2/7
-
7/28/2019 U4 Assig.3 First 2011 (Mechanical) New.doc LAST NEW - W-Signature
3/7
11
8
10 102
109log10
BTEC First Certificatein Engineering
Unit 4: Mathematics for Engineering Technicians
Assignment 3: Be able to use an electronic scientific calculator
In your work as a technician, you may have to deal with many different types of calculations
that need the use of calculator. As a part of your course you are required to prove your
abilities to use the calculator to perform different kinds of calculations and this could be done
through solving the following tasks:-
Task 1:( Pass ) : [P6 ]
Evaluate each of the following; show your work in steps of calculator boxes:
1. y =
2. k= ( 2.2 9.8 ) + ( 5.2 6.3 )
Page 1 of 3
-
7/28/2019 U4 Assig.3 First 2011 (Mechanical) New.doc LAST NEW - W-Signature
4/7
5.2097.25
81.693.67
Task 1( Pass ) : [ P6]
3. w = [3cos 35o ( 1 + tan -1 0.2 ) / 5 ] sin 2 80o
4. t=
Page 2 of 3
-
7/28/2019 U4 Assig.3 First 2011 (Mechanical) New.doc LAST NEW - W-Signature
5/7
6 3
473
48
62687tan705log5
++
e
Task 2 ( Distinction ) [D2]
Evaluate each of the following; show your work in steps of calculator boxes:
1. Z=
2. y =
Page 3 of 3
-
7/28/2019 U4 Assig.3 First 2011 (Mechanical) New.doc LAST NEW - W-Signature
6/7
Assessment Feedback Form(This feedback sheet must be completed by the ASSESSOR whereappropriate)
StudentsName:
Unit No.: 4Assessment Title:
Be able to use an electronic
scientific calculator
Grading Criteria Achieved:
Unit Title: Mathematics for Engineering Technicians
OutcomeNo.: 2
OutcomeTitle:
Be able to use an electronic scientific calculator.
AssignmentNo.: 3
Part: 1
o
f 1
CriteriaReferenc
eAssessment Criteria Achieved Evidence Comments/feedback
P6
Perform calculations
using the basic and
special functions keys of
an electronic scientific
calculator.
Yes/NoCalculatio
ns
D2
Carry out chained
calculations using an
electronic calculator.Yes/No
Calculations
M3
Assessors General Comments:
M4
Assessors Name:ModhafarM.Mohammad
Signature: Date:
Students Comments:
Students Name: Signature: Date:
Student's Work has been Internally Verified
IVs Name: Tariq Ahmed Abulnasr IVs Signature: Date:
CriteriaAchieved
P6 D2
-
7/28/2019 U4 Assig.3 First 2011 (Mechanical) New.doc LAST NEW - W-Signature
7/7
Feedback Sheet
Feedback Sheet