types offms layout
TRANSCRIPT
![Page 1: Types OFFms layout](https://reader035.vdocuments.us/reader035/viewer/2022070510/58ab18871a28ab70038b6e27/html5/thumbnails/1.jpg)
• This is to certify
That Mr. GHONIYA MUBASSIR.I Of MechanicalEnrolment No.136010319024 has satisfactorilyCompleted his term work.
Date:-______
______________ ______________ SIGN OF TEACHER SIGN OF H.O.D
CERTIFICATE
![Page 2: Types OFFms layout](https://reader035.vdocuments.us/reader035/viewer/2022070510/58ab18871a28ab70038b6e27/html5/thumbnails/2.jpg)
A.Y.DADABHAI TECHNICAL INSTITUTE, KOSAMBA
SUBJECT: F.M.S LAYOUTSUBMITTED BY
GHONIYA MUBASSIR AHMED IMTIYAZ AHMEDEnrolment No:- 136010319024
Guide BY:- D.G.K
![Page 3: Types OFFms layout](https://reader035.vdocuments.us/reader035/viewer/2022070510/58ab18871a28ab70038b6e27/html5/thumbnails/3.jpg)
• WHAT IS F.M.S• A Flexible manufacturing system (FMS) is a
manufacturing system in which there is some amount of flexibility that allows the system to react in case of changes, whether predicted or unpredicted. This flexibility is generally considered to fall into two categories, which both contain numerous subcategories.
![Page 4: Types OFFms layout](https://reader035.vdocuments.us/reader035/viewer/2022070510/58ab18871a28ab70038b6e27/html5/thumbnails/4.jpg)
• TYPES OF F.M.S LAYOUT
1. PROGRESSIVE OR LINE TYPE 2. LOOP TYPE3. LADDER TYPE 4. OPEN FIELD TYPE5. ROBOT CENTERED TYPE
![Page 5: Types OFFms layout](https://reader035.vdocuments.us/reader035/viewer/2022070510/58ab18871a28ab70038b6e27/html5/thumbnails/5.jpg)
1. PROGESSIVE OR LINE TYPE
![Page 6: Types OFFms layout](https://reader035.vdocuments.us/reader035/viewer/2022070510/58ab18871a28ab70038b6e27/html5/thumbnails/6.jpg)
• The machines and handling system are arranged in a line.
• It is most appropriate for a system in which the part progress from one workstation to the next in a well-defined sequence with no back flow.
• The operation of this type of system is very similar to transfer type.
• Work always flows in unidirectional path as shown in Figure.
• Straight line flow, well-defined processing sequence similar for all work units
• Work flow is from left to right through the same workstations
C
![Page 7: Types OFFms layout](https://reader035.vdocuments.us/reader035/viewer/2022070510/58ab18871a28ab70038b6e27/html5/thumbnails/7.jpg)
• No secondary handling system• Linear transfer system with secondary parts handling
system at each workstation to facilitate flow in two directions
![Page 8: Types OFFms layout](https://reader035.vdocuments.us/reader035/viewer/2022070510/58ab18871a28ab70038b6e27/html5/thumbnails/8.jpg)
2. LOOP TYPE
![Page 9: Types OFFms layout](https://reader035.vdocuments.us/reader035/viewer/2022070510/58ab18871a28ab70038b6e27/html5/thumbnails/9.jpg)
• The parts usually move in one direction around the loop, with the capability to stop and be transferred to any station.
• The loading and unloading stations are typically located at one end of the loop.
• One direction flow, but variations in processing sequence possible for different part types.
• Secondary handling system at each workstation.• Parts can skip stations for flexibility• Used for large part sizes• Best for long process times
![Page 10: Types OFFms layout](https://reader035.vdocuments.us/reader035/viewer/2022070510/58ab18871a28ab70038b6e27/html5/thumbnails/10.jpg)
3. LADDER TYPE
![Page 11: Types OFFms layout](https://reader035.vdocuments.us/reader035/viewer/2022070510/58ab18871a28ab70038b6e27/html5/thumbnails/11.jpg)
• The configuration is as shown in Figure. The loading and unloading station is typically located at the same end.
• The sequence to the operation/transfer of parts from one machine tool to another is in the form of ladder steps.
• Loop with rungs to allow greater variation in processing sequence
• Parts can be sent to any machine in any sequence• Parts not limited to particular part families
![Page 12: Types OFFms layout](https://reader035.vdocuments.us/reader035/viewer/2022070510/58ab18871a28ab70038b6e27/html5/thumbnails/12.jpg)
4. OPEN FIELD TYPE
![Page 13: Types OFFms layout](https://reader035.vdocuments.us/reader035/viewer/2022070510/58ab18871a28ab70038b6e27/html5/thumbnails/13.jpg)
• The open field layout is also an adoption of the loop configuration.
• The open field layout consists of loops and ladders organized to achieve the desired processing requirements. This is used for the processing of a large family of parts. The number of different machines may be limited, and the parts are routed to different workstations depending on availability of machines.
• A possible arrangement of this layout is shown in fig
![Page 14: Types OFFms layout](https://reader035.vdocuments.us/reader035/viewer/2022070510/58ab18871a28ab70038b6e27/html5/thumbnails/14.jpg)
5. ROBOT CENTERD TYPE
![Page 15: Types OFFms layout](https://reader035.vdocuments.us/reader035/viewer/2022070510/58ab18871a28ab70038b6e27/html5/thumbnails/15.jpg)
• If a handling robot is used in a Flexible manufacturing system cell , the machines are laid out in a circle, such a layout is called circular layout.
• A possible arrangement of this layout is shown in fig.
![Page 16: Types OFFms layout](https://reader035.vdocuments.us/reader035/viewer/2022070510/58ab18871a28ab70038b6e27/html5/thumbnails/16.jpg)
• APPLICATION
1. Metal-cutting machining2. Metal forming3. Assembly4. Joining-welding (arc , spot), gluing5. Surface treatment6. Inspection7. Testing
![Page 17: Types OFFms layout](https://reader035.vdocuments.us/reader035/viewer/2022070510/58ab18871a28ab70038b6e27/html5/thumbnails/17.jpg)
• ADVANTAGE
1. ECONOMIC ADVANTAGE• Reduced direct labor requirements• Fewer machines required• Operating time2. PRODUCTIVE ADVANTAGE• Increased machine utilization• Reduction in factory floor space• Higher labor productivity• Unattended production and reduced manpower
needs
![Page 18: Types OFFms layout](https://reader035.vdocuments.us/reader035/viewer/2022070510/58ab18871a28ab70038b6e27/html5/thumbnails/18.jpg)
• DISADVANTAGE
• Limited ability to adapt to changes in product or product mix.
• Substantial pre-planning activity.• Expensive, costing millions of dollars.• Technological problems of exact component
positioning and precise timing necessary to process a component.
• Sophisticated manufacturing systems.
![Page 19: Types OFFms layout](https://reader035.vdocuments.us/reader035/viewer/2022070510/58ab18871a28ab70038b6e27/html5/thumbnails/19.jpg)
• REFERANCES
• http://www.9tes.com/2015/05/fms-layout-types.html