tungsten aride hardfaed slasher lades...at slasher blades are manufactured in italy using boron...

ATC GROUP has always been

driven to be the absolute

leader in the field of

specialised hardfacing and

tungsten carbide overlay.

To achieve this we constantly

evolve our process, with

application technology,

material matrix selection,

alloys, and pre/post heat

treatment regimes. ATC’s

computerised grit delivery

system results in a consistent

and weight balanced overlay

finish. ATC are very

experienced at what we do!

ATC Group

P: 07 3285 7777 - M: 0448 588 433

Email: [email protected]

www.atcgroup.com.au

ABN 40 414 770 743

SUPPLIERS OF TUNGSTEN CARBIDE WEARPARTS FOR AGRICULTURE,

HORTICULTURE, VITICULTURE, FORESTRY, EARTHMOVING.

TUNGSTEN CARBIDE HARDFACED SLASHER BLADES

ATC supply standard

replacement, and or tungsten

carbide hardfaced boron

blades. ATC can reduce your

blade purchases and save you

time and labour costs due to

not having to change out

worn blades anywhere near

as often. Replacement blades

are available to suit Agrifarm,

Chris Grow, Daken, Gason,

Fieldmaster, Howard, and

Southern Cross slashers.

References to OEM brands and part numbers are for identification purposes

only and items are not sold as original equipment parts.

Suits Various

Nugget, MD, HD, EHD, XHD

slashers.

REPLACEMENT SLASHER BLADES TO SUIT

AGRIFARM, CHRIS GROW, DAKEN,

FIELDMASTER, GASON, HOWARD AND

SOUTHERN CROSS SLASHERS.

Gason / Chris Grow Slasher Blades OEM 225158/225159

left and right hand.

Howard LH suction lift OEM 78663. Also suits

Agrifarm ACS, AES, AHS slashers.

Howard LH suction lift OEM 78787. Leading edge

style blade 90mm wide.

ATC slasher blades are manufactured in Italy using boron 30MNB5 material and can be

supplied as a standard replacement blade or a tungsten carbide hardfaced blade. All

hardfacing is completed by ATC Group at our Brisbane Queensland location.

Suits Various

Nugget, MD, HD, EHD, XHD

slashers.

Suits Various and Proper

Topper 10’ and 12’


MC1500/1600 left and right hand.

Suits Various Orchard VHD,

single and multi rotor

mowers.





Suits Various and Proper

Topper 8’ and Orchard, Rapier,

single and multi rotor mowers.

A-SBCG26/27

350mm x 13mm

A-SBCG48/49

450mm x 13mm

A-SBCG22/23

350mm x 13mm

A-SBHO24LH

355mm x 12mm

A-SBHO43LH

355mm x 12mm

Suits Various Trailed VHD,

Orchard VHD, Delta Wing,

single and multi rotor mowers.

A-SBCG28/29

450mm x 13mm

Optional

Hammers

Suit Nobili models

BNG-BNU

A-HANO65444

Straight

Blades Suit Nobili

models BNG-BNU

OEM 2555003

A-FLNO17

Nobili Y & straight blades to suit

BNG-BNU mulchers also suit

other flail mower brands.

Dimensions of the Y and straight

blades are: 25mm Hole, 171mm

long from centre of hole to end of

blade and 60mm wide x 10mm

thick.

TUNGSTEN CARBIDE HARDFACED MULCHING

HAMMERS AND FLAILS

Below: Picture shows a Nobili flail with a custom hardfaced

pattern which has lasted 4 times longer than a non hardfaced flail.

This flail has been turned after one side has completely worn.

Because of the hardfacing, the original length of the flail has been

maintained and still cuts like a new blade.

Y Blades

Suit Nobili

models

BNG-BNU

OEM 2555004

A-FLNO16

Below: In orchard trial showing a hardfaced ATC blade on the right

compared to non hardfaced boron blade on the left. As the ATC

blade wears, a sharp edge is maintained for excellent mulching

performance and wear life.

Berti T Type

ECF models

double

edge

OEM

MD1950

I-WMF04-80

Standard replacement or

hardfaced available.

Berti T Type

ECF models

single

edge

OEM

MD1950

I-WMF04-80-SS



Berti P Type

suit

models

TA/P

OEM

MP0008

A-HABE01



Berti A Type

suit models

TBM/S, TFH/M,

TFB/M

OEM

MP0794

A-HABE150



FAE / Seppi suit models

FML, SSL,

HY, FS

double

edge

I-WMF-04-60



FAE / Seppi suit models

FML, SSL,

HY, FS

single

edge

I-WMF04-60-SS



Seppi suit models

SMW, SBM

single

edge OEM

15002041

A-HASE7387



Seppi suit models

SMO, S9, WBS,

OLS single edge

OEM

13002001

A-HASE7394



Recommended

for areas with little to no rock.

Popular on excavator groomers

and clean pruning applications.

Induction brazed

tungsten tiled

versions are also

available.

Contact Paul

for pricing

ATC’s range of mulching hammers and flails are available as standard replacement parts or

with ATC’s tungsten carbide hardfacing overlay, or brazed tungsten tiles or a combination

of both. ATC listen to our customers requirements and can provide custom hardfacing to

suit your individual application. Call Paul on 07 3285 7777 or Mobile 0448 588 433.

ATC’S COMPUTERISED GRIT DELIVERY SYSTEM

RESULTS IN A CONSISTENT AND WEIGHT

BALANCED OVERLAY FINISH. ATC ARE VERY

EXPERIENCED AT WHAT WE DO!

AHWI / Fecon AHWI OEM

BFS26 also

Fecon

FTX130

140FM

I-WMF01-2TWC

2 Tiles with tungsten carbide

overlay.

AHWI / Fecon AHWI New

Generation

OEM HDT01

also Fecon

FTX6000

I-WMF22-2TWC


overlay.

FAE / Caterpillar C Type OEM 111530012-K

CAT OEM

382-6262

Side scrapers

also stocked.

I-WMF07-3TWC


overlay.

FAE / Caterpillar C3 Style OEM 111530017-K

CAT OEM

475-2811

Side scrapers

also stocked.

FAE / Caterpillar C Type alternative.

Aggressive mulching deep

cut. Great

custom

tooth.

I-WMF36-WC

1 Tile with tungsten carbide

overlay.

I-WMF38-3TWC


overlay.

Fecon FGT FGT double

carbide.

Side

scrapers

also stocked.

I-WMF10-3TWC


overlay.

Seppi M

Fixed teeth

OEM

182.02.040

Opt 193

I-WMF32-2T

2 tiles and hex bolt hole.

ATC stock a large range of teeth, inserts, and holders for forestry mulchers, excavator

mulchers, and groomers. Only a small range of ATC parts have been listed above. Please

contact ATC should you not see the parts you require.

References to OEM brands and part numbers are for identification purposes only and items are not sold as

original equipment parts.

Bobcat, John Deere,

Fecon Seating lugs

also

available.

I-WMF11-2TWC

2 Tiles 2 bolt with tungsten

carbide overlay.

ATC FIXED TEETH, INSERTS, AND HOLDERS FOR

FORESTRY MULCHER SUCH AS AHWI, BOBCAT,

BRADCO, CATERPILLAR, DIGGA, FAE, FECON,

JOHN DEERE, LOFTNESS, RAYCO, SEPPI AND MORE.

AHWI / Fecon AHWI New

Generation

OEM HDT01

also Fecon

FTX6000

I-WMF22-TWC

1 Tile with tungsten carbide

overlay. Aggressive cut version.

24” & 30” NON INVERSION RIPPER LEG

ASSEMBLIES. POINTS, SHIN GUARDS, SHEAR

PINS AND CLEVIS CLIPS ALSO AVAILABLE.

24” Ripper leg assembly

30” Ripper leg assembly

24” Assembly fitted with

hardfaced point and shin

guard A-RI024-WC

30” Assembly fitted with

hardfaced point and shin

guard A-RI030-WC

ATC ripper leg assemblies suit 4” x 4”

square RHS toolbars. They are supplied as

a complete assembly including, point, shin

guard, all fasteners and shear pin rated

with a 5T breakout. All spare parts are

readily available. Assemblies can be

purchased with pre fitted tungsten carbide

hardfaced points and shin guards or as

standard assemblies.

ATC Group Unit 7/34 Paisley Drive

Lawnton Queensland 4500.

Point A-RIPOINT

Hardfaced point A-RIPOINT-WC

Agrowplow hardfaced point A-121-2001

Shin guard A-121-1031

Hardfaced shin guard A-121-1031-WC

Shear pin PR-RISP1x82

Clevis clip PR-RICC

A-ACP010-4TWC

Hardfaced with ATC tungsten overlay and

4 tungsten tiles.

Yeoman Ripper Point

WMB3

Wombat

overlay and 4 tungsten tiles

Agrowplow

Ripper Point

OEM

122-0036

A-122-2001-WC

Hardfaced with ATC tungsten overlay.

Aerator Tines now available. To suit aerators such as Aerway, Berends,

Agrifarm, Leda and Farmtech style aerators. Our

hardfaced version is pictured below. It is

hardfaced 6” along the profiled blade edge and

additionally along the tine edge.

Aerator Tines

“Shattertine” style

supplied as standard

replacement item or as a

tungsten carbide

overlayed option.

A-ST5455-LH Standard

A-ST5455-RH Standard

A-ST5455-LH-WC Hardfaced

A-ST5455-RH-WC Hardfaced

A-ACP010-WC

Hardfaced

with ATC tungsten overlay.

Our high quality cast wearparts are made from high

quality nickel chromalloy steel. The steel we use is a

high nickel steel not relying heavily on high carbon

levels to achieve hardness. Many companies use high

carbon steel instead of nickel to reduce production

costs at the expense of ductility and durability. ATC

never compromise on quality to reduce costs.

Yeoman Ripper

Point WMB3

Wombat with

tungsten overlay

A-ACP003-WC

Hardfaced with ATC tungsten overlay.

Gessner Ripper

Point

OEM 7004-026

Pictured below: An ATC tungsten carbide hardfaced Boron hoe blade undergoing trial compared to

non hardfaced Boron blades . The non hardfaced blades in the background are completely worn to

sharp points whilst the ATC blade has yet to wear through the hardfaced section. Utilising a unique

sharp tungsten grit matrix, our blades sharpen as they wear and provide greatly extended wear life

compared to a non hardfaced blade.

REPLACEMENT BORON ROTARY HOE BLADES TO

SUIT AGRATOR, BREVIGLIERI, CELLI, FALC,

HOWARD, KRONE, KUHN, MASCHIO, SICMA,

TORTELLA, WECAN, VALENTINI AND MORE.

Pictured Left: Soil profiler blade coated with

ATC tungsten carbide hard facing. The

message I received from a large macadamia

farm in SEQ was as below.

“Paul, these blades did a full season on the

profiler, no wear at all mate”

ATC work with you to reduce your wear part

purchases whilst saving you time and labour

costs by not having to replace wearing parts

anywhere near as often.

Krone “L” Blade suits

models RF

OEM

1070830

1072690

A-RHHO52LH/RH

Standard or

hardfaced

Maschio

“L” Blade suits

models

G series OEM

20100414

20100415

A-RHMA31LH/RH

Standard or

hardfaced

Maschio

“L” Blade suits

models

S series OEM

09400418

09400419

A-RHMA42LH/RH

Standard or

hardfaced

Valentini “L” Blade suits

models

Ercules

4.2m-7.7m

180/400hp

A-RHMA42LH/RH

Standard or

hardfaced

Kuhn

“L” Blade suits

models E, EL

OEM

52255400

52255500

A-RHHO52LH/RH

Standard or

hardfaced

Maschio

“L” Blade suits

models

B,BI,C,SC

OEM 0110428

0110429

A-RHMA22LH/RH

Standard or

hardfaced

Pictures used for illustration purposes. ATC hoe blades are not sold as original equipment and OEM references are used

for identification purposes only.

Maschio “C” Blade suits

models

B,BI,C,SC

OEM 0110426

0110427

A-RHMA21LH/RH

Standard or

hardfaced

Maschio

“C” Blade suits

models

G series

OEM 20100412

20100413

A-RHMA30LH/RH

Standard or

hardfaced

Falc “L” Blade suits

models

Gamma/P,

Kappa OEM

25.03.26/27

A-RHHO52LH/RH

Standard or

hardfaced

ATC ROTARY HOE BLADES sharpen as they wear which limits compressive forces,

drag and increased Hp requirements or fuel consumption. Feedback from our customers

prove that ATC tungsten carbide rotary hoe blades not only increase wear life but perform

economically due to the sharp tungsten carbide grit used in our hardfacing technique.

TO ORDER CALL PAUL ON MOBILE 0448 588 433

OR PHONE 07 3285 7777

OR EMAIL [email protected]

Breviglieri “L” Blade suits

models

B83– B250,

Doble & Maxi

OEM 064818

A-CEL22LH/RH

Standard or

hardfaced

Breviglieri “C” Blade

suits models

B83– B250,

Doble & Maxi

OEM 064811

A-CEL21LH/RH

Standard or

hardfaced

Celli / Falc

“L” Blade suits

models

Pioneer, Tiger

G,K OEM

722533/4

A-CEL22LH/RH

Standard or

hardfaced

Celli “L” Blade suits

models

Alpha, C, CE

OEM

331526/7

A-CEL14LH/RH

Standard or

hardfaced

Celli “C” Blade

suits models

Alpha, C, CE

OEM

331528/9

A-CEL10LH/RH

Standard or

hardfaced

Howard

“L” Blade suits

models

R500, HR30,35

E,AR,ST OEM

63604 / 63605

A-RHHO01LH/RH

Standard or

hardfaced

Howard

“L” Blade suits

models

HR35

“R2 ROTOR”

OEM 79970/1

A-RHMA22LH/RH

Standard or

hardfaced

Howard

“L” Blade suits

models AH, CH

RC, HR40-43

S,M OEM

9862/9863

A-RHHO81LH/RH

Standard or

hardfaced

Howard

“L” Blade Long

Shank for AH,

CH, RC, HR40-

43 S,M OEM

9910/9911

A-RHHO46LH/RH

Standard or

hardfaced

Howard

“L” Blade

HR50,60,61 “F”

Rotor. OEM

762719

762720

A-RHHO52LH/RH

Standard or

hardfaced

Celli / Falc “C” Blade suits

models

Pioneer, Tiger

G,K

OEM 722536/7

A-CEL21LH/RH

Standard or

hardfaced

Howard

“C” Blade suits

models AH,

CH, RC, HR40-

43 S,M OEM

9950/9951

A-RHHO35LH/RH

Standard or

hardfaced

Celli Suits models

ER, Minigo,

Laser, Range

OEM

622715/622716

A-PHMA16LH/RH

Standard or

hardfaced

Falc/Fox

Suits models

Fox

OEM

512075

512076

A-PHMA31LH/RH

Standard or

hardfaced

Kverneland

Suits models

PH, PB, NG

OEM

010146

020146

A-PHMA16LH/RH

Standard or

hardfaced

Sicma

Suits models

Super 300

OEM

052701

052801

A-PHMA16LH/RH

Standard or

hardfaced

Maschio

Suits models

DC, DS, DL

OEM

38100222

38100223

A-PHMA31LH/RH

Standard or

hardfaced

Maschio

Suits models

DM, Aquila

OEM

36100215

36100216

A-PHMA36LH/RH

Standard or

hardfaced

ATC POWER HARROW BLADES The tungsten carbide hardfacing of ATC power harrow

blades have excellent penetration into the parent metal with even and consistent particle spread.

This is why our hardfacing product does not break away. We stock bolt on power harrow blades

for popular power harrow brands but can custom hardface quick fit blade applications.

ATC power harrow blades are not sold as original equipment. OEM references used for identification purposes only.

HOW TO ORDER

Call Paul on 07 3285 7777 or mobile 0448 588 433 or email

[email protected]

30 day trading accounts available to approved applicants.

Website: www.atcgroup.com.au

Dimensions mm Holes Bolt Size

1220 x 152 x 16 8 Holes @ 6” centres 5/8” Bolt

1600 x 152 x 16 10 Holes @ 6” centres 5/8“ Bolt






Double bevel cutting edges. Custom made edges also available. Can be ordered plain or with

ATC tungsten

carbide overlay.

Caterpillar, Komatsu, ESCO, H&L, mini excavator, skid steer teeth Extensive range,

plain or hardfaced.

Hardfaced patterns to

suit specific applications.

ATC G.E.T COMPONENTS. CUTTING EDGES, TEETH,

RIPPER BOOTS, SCARIFIER TIPS. FOR A COMPLETE

CATALOGUE OF ALL PARTS CONTACT

PAUL ON PH: 07 3285 7777 MOB: 0448 588 433

OR EMAIL [email protected]

All parts are stocked on the

shelf ready for

Immediate supply.

Caterpillar J200, J250, J300, J350, J400, J450, J460 series

Caterpillar ripper boots D4, D5, D6, D7, D8, D9 models

Caterpillar scarifier tips and shanks available

ESCO S18, S25, S30, S35, S40

Komatsu PC200, PC300, PC400 series

Mini excavator, skid steer loaders up to 3 tonne

H&L 23 with ATC hardfacing. H&L 24 also stocked

Adapters, pins, and retainers are stocked. For a complete catalogue and pricing on G.E.T parts

stocked by ATC call Paul on 07 3285 7777 or email [email protected].

Contact Paul to discuss

your requirements.

Complete priced

catalogue available

on request.

Brand / ATC Part Number Model

Bandit / CHKN-900990227 1590 / 1590XP (15" Drum Chipper)

Bandit / CHKN-900990227 15XP Intimidator (15" Drum Chipper)

Bandit / CHKN-900990227 1890/1890XP Intimidator (18” Drum Chipper) # 1101 to current

Bandit / CHKN-900990227 2090 Drum Chipper before Serial # 2045 (20” Drum Chipper)

Moorbark / CHKN-39233813 M12R Brush Chipper (12" Drum Chipper)

Moorbark / CHKN-39233813 14 Blizzard Brush Chipper (14" Drum Chipper)

Moorbark / CHKN-39233813 M15R and M15RX Brush Chipper (15" Drum Chipper)

Moorbark / CHKN-39233813 15 Tornado Brush Chipper (15" Drum Chipper)

Moorbark / CHKN-39233813 18 Brush Chipper (18" Drum with Double Edge Knives)

Moorbark / CHKN-39233813 2400XL Hurricane Brush Chipper (18" Drum Chipper)

Moorbark / CHKN-39233813 M18R and M18RX Brush Chipper (18" Drum Chipper)

Moorbark / CHKN-39233813 M20R Brush Chipper (20" Drum with Double Edge Knives)

Rayco / CHKN-900990227 RC12 and RC1220 (12" Drum Chipper)

Rayco / CHKN-900990227 RC16.5 (16.5" Drum Chipper)

Rayco / CHKN-900990227 RC20XP (20" Drum Chipper)

Vermeer / CHKN-153175001 BC700 (6" Drum Chipper)

Vermeer / CHKN-153175001 BC1000 and BC1000XL (12" Drum Chipper)

Vermeer / CHKN-153175001 BC1200XL (13" Drum Chipper)


Vermeer / CHKN-157697001 BC1800XL and AX19 (19" Drum Chipper)


Vermeer / CHKN-157697001 BC2000XL (20" Drum Chipper)

ATC WOOD CHIPPER BLADES are manufactured from A8

modified Swiss tool steel and cryogenically treated. ATC

wood chipper blades are supplied in a safe and convenient

carry box at no extra charge. All blades are additionally fitted

with edge protectors for safety and for ease of handling.

Bolts - hex head, plow, socket head cap screw

Nuts - elliptical, UNC, UNC cone lock, nyloc nuts

Huge assortment of imperial and metric styles of bolts, nuts, and washers are available.

Minimum 170,000 PSI tensile strength which is 14% higher than SAE requirements.

Drop forged tungsten coated trencher teeth to

suit Ditchwitch, Digga, Hydropower chains

1.654 inch bolt centres LH & RH tungsten overlayed teeth.

2 inch bolt centres LH & RH tungsten overlayed teeth.

3 inch bolt centres LH & RH tungsten overlayed teeth.

1.654” DT-CT1LH/RH-WC 2” DT-CT2LH/RH-WC 3” DT-CT3LH/RH-WC

DT-SB25-TWC

Auger pilots, teeth,

and adapters

Available in sizes 2.5 Inch,

3 Inch, 3.5 Inch, and 4 Inch.

With ATC overlay.

DT-P35-WC

10mm dirt tooth with

tungsten overlay for

high impact.

DT-P35-T-ABRASION

10mm dirt tooth with

tungsten tile for high

abrasion.

DT-P35-3T-ROCK

10mm rock tooth

with 3 tiles for rocky

ground.

DT-P30-T-CHISEL-ROCK

10mm chisel rock tooth

with tile for rocky

ground.

Weld on Pengo style

adapter.

DT-PA001 DT-RUBBER

6.5mm x 150mm rub-

ber for auger teeth

fitment.

TRENCHER TEETH, AUGER PILOTS, TEETH AND

ADAPTERS. ALSO A HUGE RANGE OF

FASTENERS ARE AVAILABLE.

tungsten aride hardfaed slasher lades...at slasher blades are manufactured in italy using boron...

Documents