ATC GROUP has always been
driven to be the absolute
leader in the field of
specialised hardfacing and
tungsten carbide overlay.
To achieve this we constantly
evolve our process, with
application technology,
material matrix selection,
alloys, and pre/post heat
treatment regimes. ATC’s
computerised grit delivery
system results in a consistent
and weight balanced overlay
finish. ATC are very
experienced at what we do!
ATC Group
P: 07 3285 7777 - M: 0448 588 433
Email: [email protected]
www.atcgroup.com.au
ABN 40 414 770 743
SUPPLIERS OF TUNGSTEN CARBIDE WEARPARTS FOR AGRICULTURE,
HORTICULTURE, VITICULTURE, FORESTRY, EARTHMOVING.
TUNGSTEN CARBIDE HARDFACED SLASHER BLADES
ATC supply standard
replacement, and or tungsten
carbide hardfaced boron
blades. ATC can reduce your
blade purchases and save you
time and labour costs due to
not having to change out
worn blades anywhere near
as often. Replacement blades
are available to suit Agrifarm,
Chris Grow, Daken, Gason,
Fieldmaster, Howard, and
Southern Cross slashers.
References to OEM brands and part numbers are for identification purposes
only and items are not sold as original equipment parts.
Suits Various
Nugget, MD, HD, EHD, XHD
slashers.
REPLACEMENT SLASHER BLADES TO SUIT
AGRIFARM, CHRIS GROW, DAKEN,
FIELDMASTER, GASON, HOWARD AND
SOUTHERN CROSS SLASHERS.
Gason / Chris Grow Slasher Blades OEM 225158/225159
left and right hand.
Howard LH suction lift OEM 78663. Also suits
Agrifarm ACS, AES, AHS slashers.
Howard LH suction lift OEM 78787. Leading edge
style blade 90mm wide.
ATC slasher blades are manufactured in Italy using boron 30MNB5 material and can be
supplied as a standard replacement blade or a tungsten carbide hardfaced blade. All
hardfacing is completed by ATC Group at our Brisbane Queensland location.
Suits Various
Nugget, MD, HD, EHD, XHD
slashers.
Suits Various and Proper
Topper 10’ and 12’
Gason / Chris Grow Slasher Blades OEM 223542/2235433
MC1500/1600 left and right hand.
Suits Various Orchard VHD,
single and multi rotor
mowers.
Gason / Chris Grow Slasher Blades OEM 226511/226512
MC1520/1620 left and right hand.
Gason / Chris Grow Slasher Blades OEM 226428/226427
MC1525/1625 left and right hand.
Suits Various and Proper
Topper 8’ and Orchard, Rapier,
single and multi rotor mowers.
A-SBCG26/27
350mm x 13mm
A-SBCG48/49
450mm x 13mm
A-SBCG22/23
350mm x 13mm
A-SBHO24LH
355mm x 12mm
A-SBHO43LH
355mm x 12mm
Suits Various Trailed VHD,
Orchard VHD, Delta Wing,
single and multi rotor mowers.
A-SBCG28/29
450mm x 13mm
Optional
Hammers
Suit Nobili models
BNG-BNU
A-HANO65444
Straight
Blades Suit Nobili
models BNG-BNU
OEM 2555003
A-FLNO17
Nobili Y & straight blades to suit
BNG-BNU mulchers also suit
other flail mower brands.
Dimensions of the Y and straight
blades are: 25mm Hole, 171mm
long from centre of hole to end of
blade and 60mm wide x 10mm
thick.
TUNGSTEN CARBIDE HARDFACED MULCHING
HAMMERS AND FLAILS
Below: Picture shows a Nobili flail with a custom hardfaced
pattern which has lasted 4 times longer than a non hardfaced flail.
This flail has been turned after one side has completely worn.
Because of the hardfacing, the original length of the flail has been
maintained and still cuts like a new blade.
Y Blades
Suit Nobili
models
BNG-BNU
OEM 2555004
A-FLNO16
Below: In orchard trial showing a hardfaced ATC blade on the right
compared to non hardfaced boron blade on the left. As the ATC
blade wears, a sharp edge is maintained for excellent mulching
performance and wear life.
Berti T Type
ECF models
double
edge
OEM
MD1950
I-WMF04-80
Standard replacement or
hardfaced available.
Berti T Type
ECF models
single
edge
OEM
MD1950
I-WMF04-80-SS
Standard replacement or
hardfaced available.
Berti P Type
suit
models
TA/P
OEM
MP0008
A-HABE01
Standard replacement or
hardfaced available.
Berti A Type
suit models
TBM/S, TFH/M,
TFB/M
OEM
MP0794
A-HABE150
Standard replacement or
hardfaced available.
FAE / Seppi suit models
FML, SSL,
HY, FS
double
edge
I-WMF-04-60
Standard replacement or
hardfaced available.
FAE / Seppi suit models
FML, SSL,
HY, FS
single
edge
I-WMF04-60-SS
Standard replacement or
hardfaced available.
Seppi suit models
SMW, SBM
single
edge OEM
15002041
A-HASE7387
Standard replacement or
hardfaced available.
Seppi suit models
SMO, S9, WBS,
OLS single edge
OEM
13002001
A-HASE7394
Standard replacement or
hardfaced available.
Recommended
for areas with little to no rock.
Popular on excavator groomers
and clean pruning applications.
Induction brazed
tungsten tiled
versions are also
available.
Contact Paul
for pricing
ATC’s range of mulching hammers and flails are available as standard replacement parts or
with ATC’s tungsten carbide hardfacing overlay, or brazed tungsten tiles or a combination
of both. ATC listen to our customers requirements and can provide custom hardfacing to
suit your individual application. Call Paul on 07 3285 7777 or Mobile 0448 588 433.
ATC’S COMPUTERISED GRIT DELIVERY SYSTEM
RESULTS IN A CONSISTENT AND WEIGHT
BALANCED OVERLAY FINISH. ATC ARE VERY
EXPERIENCED AT WHAT WE DO!
AHWI / Fecon AHWI OEM
BFS26 also
Fecon
FTX130
140FM
I-WMF01-2TWC
2 Tiles with tungsten carbide
overlay.
AHWI / Fecon AHWI New
Generation
OEM HDT01
also Fecon
FTX6000
I-WMF22-2TWC
2 Tiles with tungsten carbide
overlay.
FAE / Caterpillar C Type OEM 111530012-K
CAT OEM
382-6262
Side scrapers
also stocked.
I-WMF07-3TWC
2 Tiles with tungsten carbide
overlay.
FAE / Caterpillar C3 Style OEM 111530017-K
CAT OEM
475-2811
Side scrapers
also stocked.
FAE / Caterpillar C Type alternative.
Aggressive mulching deep
cut. Great
custom
tooth.
I-WMF36-WC
1 Tile with tungsten carbide
overlay.
I-WMF38-3TWC
2 Tiles with tungsten carbide
overlay.
Fecon FGT FGT double
carbide.
Side
scrapers
also stocked.
I-WMF10-3TWC
2 Tiles with tungsten carbide
overlay.
Seppi M
Fixed teeth
OEM
182.02.040
Opt 193
I-WMF32-2T
2 tiles and hex bolt hole.
ATC stock a large range of teeth, inserts, and holders for forestry mulchers, excavator
mulchers, and groomers. Only a small range of ATC parts have been listed above. Please
contact ATC should you not see the parts you require.
References to OEM brands and part numbers are for identification purposes only and items are not sold as
original equipment parts.
Bobcat, John Deere,
Fecon Seating lugs
also
available.
I-WMF11-2TWC
2 Tiles 2 bolt with tungsten
carbide overlay.
ATC FIXED TEETH, INSERTS, AND HOLDERS FOR
FORESTRY MULCHER SUCH AS AHWI, BOBCAT,
BRADCO, CATERPILLAR, DIGGA, FAE, FECON,
JOHN DEERE, LOFTNESS, RAYCO, SEPPI AND MORE.
AHWI / Fecon AHWI New
Generation
OEM HDT01
also Fecon
FTX6000
I-WMF22-TWC
1 Tile with tungsten carbide
overlay. Aggressive cut version.
24” & 30” NON INVERSION RIPPER LEG
ASSEMBLIES. POINTS, SHIN GUARDS, SHEAR
PINS AND CLEVIS CLIPS ALSO AVAILABLE.
24” Ripper leg assembly
30” Ripper leg assembly
24” Assembly fitted with
hardfaced point and shin
guard A-RI024-WC
30” Assembly fitted with
hardfaced point and shin
guard A-RI030-WC
ATC ripper leg assemblies suit 4” x 4”
square RHS toolbars. They are supplied as
a complete assembly including, point, shin
guard, all fasteners and shear pin rated
with a 5T breakout. All spare parts are
readily available. Assemblies can be
purchased with pre fitted tungsten carbide
hardfaced points and shin guards or as
standard assemblies.
ATC Group Unit 7/34 Paisley Drive
Lawnton Queensland 4500.
Point A-RIPOINT
Hardfaced point A-RIPOINT-WC
Agrowplow hardfaced point A-121-2001
Shin guard A-121-1031
Hardfaced shin guard A-121-1031-WC
Shear pin PR-RISP1x82
Clevis clip PR-RICC
A-ACP010-4TWC
Hardfaced with ATC tungsten overlay and
4 tungsten tiles.
Yeoman Ripper Point
WMB3
Wombat
overlay and 4 tungsten tiles
Agrowplow
Ripper Point
OEM
122-0036
A-122-2001-WC
Hardfaced with ATC tungsten overlay.
Aerator Tines now available. To suit aerators such as Aerway, Berends,
Agrifarm, Leda and Farmtech style aerators. Our
hardfaced version is pictured below. It is
hardfaced 6” along the profiled blade edge and
additionally along the tine edge.
Aerator Tines
“Shattertine” style
supplied as standard
replacement item or as a
tungsten carbide
overlayed option.
A-ST5455-LH Standard
A-ST5455-RH Standard
A-ST5455-LH-WC Hardfaced
A-ST5455-RH-WC Hardfaced
A-ACP010-WC
Hardfaced
with ATC tungsten overlay.
Our high quality cast wearparts are made from high
quality nickel chromalloy steel. The steel we use is a
high nickel steel not relying heavily on high carbon
levels to achieve hardness. Many companies use high
carbon steel instead of nickel to reduce production
costs at the expense of ductility and durability. ATC
never compromise on quality to reduce costs.
Yeoman Ripper
Point WMB3
Wombat with
tungsten overlay
A-ACP003-WC
Hardfaced with ATC tungsten overlay.
Gessner Ripper
Point
OEM 7004-026
Pictured below: An ATC tungsten carbide hardfaced Boron hoe blade undergoing trial compared to
non hardfaced Boron blades . The non hardfaced blades in the background are completely worn to
sharp points whilst the ATC blade has yet to wear through the hardfaced section. Utilising a unique
sharp tungsten grit matrix, our blades sharpen as they wear and provide greatly extended wear life
compared to a non hardfaced blade.
REPLACEMENT BORON ROTARY HOE BLADES TO
SUIT AGRATOR, BREVIGLIERI, CELLI, FALC,
HOWARD, KRONE, KUHN, MASCHIO, SICMA,
TORTELLA, WECAN, VALENTINI AND MORE.
Pictured Left: Soil profiler blade coated with
ATC tungsten carbide hard facing. The
message I received from a large macadamia
farm in SEQ was as below.
“Paul, these blades did a full season on the
profiler, no wear at all mate”
ATC work with you to reduce your wear part
purchases whilst saving you time and labour
costs by not having to replace wearing parts
anywhere near as often.
Krone “L” Blade suits
models RF
OEM
1070830
1072690
A-RHHO52LH/RH
Standard or
hardfaced
Maschio
“L” Blade suits
models
G series OEM
20100414
20100415
A-RHMA31LH/RH
Standard or
hardfaced
Maschio
“L” Blade suits
models
S series OEM
09400418
09400419
A-RHMA42LH/RH
Standard or
hardfaced
Valentini “L” Blade suits
models
Ercules
4.2m-7.7m
180/400hp
A-RHMA42LH/RH
Standard or
hardfaced
Kuhn
“L” Blade suits
models E, EL
OEM
52255400
52255500
A-RHHO52LH/RH
Standard or
hardfaced
Maschio
“L” Blade suits
models
B,BI,C,SC
OEM 0110428
0110429
A-RHMA22LH/RH
Standard or
hardfaced
Pictures used for illustration purposes. ATC hoe blades are not sold as original equipment and OEM references are used
for identification purposes only.
Maschio “C” Blade suits
models
B,BI,C,SC
OEM 0110426
0110427
A-RHMA21LH/RH
Standard or
hardfaced
Maschio
“C” Blade suits
models
G series
OEM 20100412
20100413
A-RHMA30LH/RH
Standard or
hardfaced
Falc “L” Blade suits
models
Gamma/P,
Kappa OEM
25.03.26/27
A-RHHO52LH/RH
Standard or
hardfaced
ATC ROTARY HOE BLADES sharpen as they wear which limits compressive forces,
drag and increased Hp requirements or fuel consumption. Feedback from our customers
prove that ATC tungsten carbide rotary hoe blades not only increase wear life but perform
economically due to the sharp tungsten carbide grit used in our hardfacing technique.
TO ORDER CALL PAUL ON MOBILE 0448 588 433
OR PHONE 07 3285 7777
OR EMAIL [email protected]
Breviglieri “L” Blade suits
models
B83– B250,
Doble & Maxi
OEM 064818
A-CEL22LH/RH
Standard or
hardfaced
Breviglieri “C” Blade
suits models
B83– B250,
Doble & Maxi
OEM 064811
A-CEL21LH/RH
Standard or
hardfaced
Celli / Falc
“L” Blade suits
models
Pioneer, Tiger
G,K OEM
722533/4
A-CEL22LH/RH
Standard or
hardfaced
Celli “L” Blade suits
models
Alpha, C, CE
OEM
331526/7
A-CEL14LH/RH
Standard or
hardfaced
Celli “C” Blade
suits models
Alpha, C, CE
OEM
331528/9
A-CEL10LH/RH
Standard or
hardfaced
Howard
“L” Blade suits
models
R500, HR30,35
E,AR,ST OEM
63604 / 63605
A-RHHO01LH/RH
Standard or
hardfaced
Howard
“L” Blade suits
models
HR35
“R2 ROTOR”
OEM 79970/1
A-RHMA22LH/RH
Standard or
hardfaced
Howard
“L” Blade suits
models AH, CH
RC, HR40-43
S,M OEM
9862/9863
A-RHHO81LH/RH
Standard or
hardfaced
Howard
“L” Blade Long
Shank for AH,
CH, RC, HR40-
43 S,M OEM
9910/9911
A-RHHO46LH/RH
Standard or
hardfaced
Howard
“L” Blade
HR50,60,61 “F”
Rotor. OEM
762719
762720
A-RHHO52LH/RH
Standard or
hardfaced
Celli / Falc “C” Blade suits
models
Pioneer, Tiger
G,K
OEM 722536/7
A-CEL21LH/RH
Standard or
hardfaced
Howard
“C” Blade suits
models AH,
CH, RC, HR40-
43 S,M OEM
9950/9951
A-RHHO35LH/RH
Standard or
hardfaced
Celli Suits models
ER, Minigo,
Laser, Range
OEM
622715/622716
A-PHMA16LH/RH
Standard or
hardfaced
Falc/Fox
Suits models
Fox
OEM
512075
512076
A-PHMA31LH/RH
Standard or
hardfaced
Kverneland
Suits models
PH, PB, NG
OEM
010146
020146
A-PHMA16LH/RH
Standard or
hardfaced
Sicma
Suits models
Super 300
OEM
052701
052801
A-PHMA16LH/RH
Standard or
hardfaced
Maschio
Suits models
DC, DS, DL
OEM
38100222
38100223
A-PHMA31LH/RH
Standard or
hardfaced
Maschio
Suits models
DM, Aquila
OEM
36100215
36100216
A-PHMA36LH/RH
Standard or
hardfaced
ATC POWER HARROW BLADES The tungsten carbide hardfacing of ATC power harrow
blades have excellent penetration into the parent metal with even and consistent particle spread.
This is why our hardfacing product does not break away. We stock bolt on power harrow blades
for popular power harrow brands but can custom hardface quick fit blade applications.
ATC power harrow blades are not sold as original equipment. OEM references used for identification purposes only.
HOW TO ORDER
Call Paul on 07 3285 7777 or mobile 0448 588 433 or email
30 day trading accounts available to approved applicants.
Website: www.atcgroup.com.au
Dimensions mm Holes Bolt Size
1220 x 152 x 16 8 Holes @ 6” centres 5/8” Bolt
1600 x 152 x 16 10 Holes @ 6” centres 5/8“ Bolt
1880 x 152 x 16 12 Holes @ 6” centres 5/8” Bolt
2080 x 152 x 19 13 Holes @ 6” centres 5/8” Bolt
1830 x 203 x 19 12 Holes @ 6” centres 3/4” Bolt
2080 x 203 x 19 13 Holes @ 6” centres 3/4” Bolt
2460 x 203 x 19 15 Holes @ 6” centres 3/4” Bolt
Double bevel cutting edges. Custom made edges also available. Can be ordered plain or with
ATC tungsten
carbide overlay.
Caterpillar, Komatsu, ESCO, H&L, mini excavator, skid steer teeth Extensive range,
plain or hardfaced.
Hardfaced patterns to
suit specific applications.
ATC G.E.T COMPONENTS. CUTTING EDGES, TEETH,
RIPPER BOOTS, SCARIFIER TIPS. FOR A COMPLETE
CATALOGUE OF ALL PARTS CONTACT
PAUL ON PH: 07 3285 7777 MOB: 0448 588 433
OR EMAIL [email protected]
All parts are stocked on the
shelf ready for
Immediate supply.
Caterpillar J200, J250, J300, J350, J400, J450, J460 series
Caterpillar ripper boots D4, D5, D6, D7, D8, D9 models
Caterpillar scarifier tips and shanks available
ESCO S18, S25, S30, S35, S40
Komatsu PC200, PC300, PC400 series
Mini excavator, skid steer loaders up to 3 tonne
H&L 23 with ATC hardfacing. H&L 24 also stocked
Adapters, pins, and retainers are stocked. For a complete catalogue and pricing on G.E.T parts
stocked by ATC call Paul on 07 3285 7777 or email [email protected].
Contact Paul to discuss
your requirements.
Complete priced
catalogue available
on request.
Brand / ATC Part Number Model
Bandit / CHKN-900990227 1590 / 1590XP (15" Drum Chipper)
Bandit / CHKN-900990227 15XP Intimidator (15" Drum Chipper)
Bandit / CHKN-900990227 1890/1890XP Intimidator (18” Drum Chipper) # 1101 to current
Bandit / CHKN-900990227 2090 Drum Chipper before Serial # 2045 (20” Drum Chipper)
Moorbark / CHKN-39233813 M12R Brush Chipper (12" Drum Chipper)
Moorbark / CHKN-39233813 14 Blizzard Brush Chipper (14" Drum Chipper)
Moorbark / CHKN-39233813 M15R and M15RX Brush Chipper (15" Drum Chipper)
Moorbark / CHKN-39233813 15 Tornado Brush Chipper (15" Drum Chipper)
Moorbark / CHKN-39233813 18 Brush Chipper (18" Drum with Double Edge Knives)
Moorbark / CHKN-39233813 2400XL Hurricane Brush Chipper (18" Drum Chipper)
Moorbark / CHKN-39233813 M18R and M18RX Brush Chipper (18" Drum Chipper)
Moorbark / CHKN-39233813 M20R Brush Chipper (20" Drum with Double Edge Knives)
Rayco / CHKN-900990227 RC12 and RC1220 (12" Drum Chipper)
Rayco / CHKN-900990227 RC16.5 (16.5" Drum Chipper)
Rayco / CHKN-900990227 RC20XP (20" Drum Chipper)
Vermeer / CHKN-153175001 BC700 (6" Drum Chipper)
Vermeer / CHKN-153175001 BC1000 and BC1000XL (12" Drum Chipper)
Vermeer / CHKN-153175001 BC1200XL (13" Drum Chipper)
Vermeer / CHKN-900990227 BC1800 (18" Drum Chipper)
Vermeer / CHKN-157697001 BC1800XL and AX19 (19" Drum Chipper)
Vermeer / CHKN-900990227 BC2000 (20" Drum Chipper)
Vermeer / CHKN-157697001 BC2000XL (20" Drum Chipper)
ATC WOOD CHIPPER BLADES are manufactured from A8
modified Swiss tool steel and cryogenically treated. ATC
wood chipper blades are supplied in a safe and convenient
carry box at no extra charge. All blades are additionally fitted
with edge protectors for safety and for ease of handling.
Bolts - hex head, plow, socket head cap screw
Nuts - elliptical, UNC, UNC cone lock, nyloc nuts
Huge assortment of imperial and metric styles of bolts, nuts, and washers are available.
Minimum 170,000 PSI tensile strength which is 14% higher than SAE requirements.
Drop forged tungsten coated trencher teeth to
suit Ditchwitch, Digga, Hydropower chains
1.654 inch bolt centres LH & RH tungsten overlayed teeth.
2 inch bolt centres LH & RH tungsten overlayed teeth.
3 inch bolt centres LH & RH tungsten overlayed teeth.
1.654” DT-CT1LH/RH-WC 2” DT-CT2LH/RH-WC 3” DT-CT3LH/RH-WC
DT-SB25-TWC
Auger pilots, teeth,
and adapters
Available in sizes 2.5 Inch,
3 Inch, 3.5 Inch, and 4 Inch.
With ATC overlay.
DT-P35-WC
10mm dirt tooth with
tungsten overlay for
high impact.
DT-P35-T-ABRASION
10mm dirt tooth with
tungsten tile for high
abrasion.
DT-P35-3T-ROCK
10mm rock tooth
with 3 tiles for rocky
ground.
DT-P30-T-CHISEL-ROCK
10mm chisel rock tooth
with tile for rocky
ground.
Weld on Pengo style
adapter.
DT-PA001 DT-RUBBER
6.5mm x 150mm rub-
ber for auger teeth
fitment.
TRENCHER TEETH, AUGER PILOTS, TEETH AND
ADAPTERS. ALSO A HUGE RANGE OF
FASTENERS ARE AVAILABLE.