Upload File

ts710 easy user guide (new design)01: schedule timer 7 day 02: schedule timer 5/2 day 03: schedule...

  • Home
  • Documents
  • TS710 Easy User Guide (New Design)01: Schedule timer 7 day 02: Schedule timer 5/2 day 03: Schedule timer 24hr 02 P2 Schedule periods 01: 1 period (2 events) 02: 2 periods (4 events)
1
Easy User Guide TS710 Single Channel Timer BC337370550705en-000104 | 087R1005 www.danfoss.com What is the TS710 Timer? The TS710 is used to switch your gas boiler either directly or via a motorised valve. The TS710 has made setting your on/off times easier than ever before. Setting time and Date a. Press and hold the OK button for 3 seconds, the screen will change to show the current year. b. Adjust using or to set the correct year. Press OK to accept. Repeat step b to set month and time settings. Timer Schedule Setup The Advanced Programmable Timer Function allows to set a timer-con- trolled program for automatic scheduled event changes. Example below for 5/2 day setup a. Press button to access schedule setup. b. Set CH flashes, press OK to confirm. c. Mo. Tu. We. Th. Fr. will flash on the display. d. You can select weekdays (Mo. Tu. We. Th. Fr.) or weekend (Sa. Su.) with or buttons. e. Press OK button to confirm days selected (e.g. Mon-Fri) The chosen day and 1st ON time is displayed. f. Use or to select ON hour, press OK to confirm. g. Use or to select ON minute, press OK to confirm. h. Now the display changes to show the “OFF” time i. Use or to select OFF hour, press OK to confirm. j. Use or to select OFF minute, press OK to confirm. k. Repeat steps f. to j. above to set 2nd ON, 2nd OFF, 3rd ON & 3rd OFF events. Note: the number of events is changed in user settings menu P2 (see table) l. After the last event time is set, if you were setting Mo. to Fr. the dis- play will display Sa. Su. m. Repeat steps f. to k. to set Sa. Su times. n. After accepting Sa. Su. final event your TS710 will return to normal operation. If your TS710 is set for 7 day operation, the option will be given to select each day separately. In 24 hr mode, the option will only be given to select Mo. to Su. together. To change this setting. See user settings P1 in User Settings table. Where the TS710 is set for 3 periods, options will be given to select peri- od 3 times. In 1 Period mode, option will be only given for one ON/OFF time. See User Settings P2. © Danfoss | FEC | 10.2020 087R1005 Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed ma- terial. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logo- type are trademarks of Danfoss A/S. All rights reserved. Danfoss A/S Heating Segment • danfoss.com • +45 7488 2222 • E-mail: [email protected] User Settings a. Press button for 3 seconds to enter the parameter setting mode. set the parameter range via or and press OK. b. To exit parameter setup press , or after 20 seconds if no button is pressed unit will return to main screen. No. Parameter settings Settings range Default P1 Working mode 01: Schedule timer 7 day 02: Schedule timer 5/2 day 03: Schedule timer 24hr 02 P2 Schedule periods 01: 1 period (2 events) 02: 2 periods (4 events) 03: 3 periods (6 events) 02 P4 Timer display 01: 24hr 02: 12hr 01 P5 Auto daylight saving 01: On 02: Off 01 P7 Service due setup Installer setting only Display & Navigations Symbols Function description Symbols Function description Mon–Sun Current set day Holiday mode Current on/off period Schedule setup (menu access*) Schedule setup OK Confirm settings (Date and time setup*) (Reset**) AM PM Current set time / parameter setup Menu navigation / day selection (AUTO+1HR function*) Time and date setup Time and setting changes / channel mode selection Heating active PR Program selection(Holiday mode selection*) (Reset**) Heating channel current mode - - * To access additional feature press and hold button for 3 seconds. **To reset the timer, press and hold the PR and OK buttons for 10 seconds. The reset is complete after ConF text appear on the display. (**Note: This does not reset service due timer or date and time settings.) Holiday Mode Holiday Mode temporarily disables the timing functions when away or out for a period of time. a. Press PR button for 3 seconds to enter Holiday mode. icon will be shown on the display. b. Press PR button again to resume normal timings. Channel Override You can override the timing between AUTO, AUTO+1HR, ON and OFF. a. Press PR button. CH will flash and current timer function, e.g. CH – AUTO. b. With channel flashing press or buttons to change between AUTO, AUTO+1HR, ON and OFF c. AUTO = the system will follow programmed schedule settings. d. ON = the system will remain constant ON until the user changes the setting. e. OFF = the system will remain constant OFF until the user changes the setting. f. a. AUTO+1HR = To boost the system for 1 hour press and hold the button for 3 seconds. f. b. With this selected, the system will remain ON for an extra hour. If it is selected while the programme is OFF, the system will switch ON immediately for 1 hour then resume programmed times(AUTO mode) again. Display and Navigation Details

Upload: others

Post on 24-Jul-2021

5 views

Category:

Documents


0 download

Report

TRANSCRIPT

Page 1: TS710 Easy User Guide (New Design)01: Schedule timer 7 day 02: Schedule timer 5/2 day 03: Schedule timer 24hr 02 P2 Schedule periods 01: 1 period (2 events) 02: 2 periods (4 events)

Easy User Guide

TS710Single Channel Timer

BC337370550705en-000104 | 087R1005 www.danfoss.com

What is the TS710 Timer?

The TS710 is used to switch your gas boiler either directly or via a motorised valve. The TS710 has made setting your on/off times easier than ever before.

Setting time and Date

a. Press and hold the OK button for 3 seconds, the screen will change to show the current year.

b. Adjust using or to set the correct year. Press OK to accept. Repeat step b to set month and time settings.

Timer Schedule Setup

The Advanced Programmable Timer Function allows to set a timer-con-trolled program for automatic scheduled event changes.Example below for 5/2 day setupa. Press button to access schedule setup.b. Set CH flashes, press OK to confirm.c. Mo. Tu. We. Th. Fr. will flash on the display.d. You can select weekdays (Mo. Tu. We. Th. Fr.) or weekend (Sa. Su.) with

or buttons.e. Press OK button to confirm days selected (e.g. Mon-Fri) The chosen

day and 1st ON time is displayed.f. Use or to select ON hour, press OK to confirm.g. Use or to select ON minute, press OK to confirm.h. Now the display changes to show the “OFF” timei. Use or to select OFF hour, press OK to confirm.j. Use or to select OFF minute, press OK to confirm.k. Repeat steps f. to j. above to set 2nd ON, 2nd OFF, 3rd ON & 3rd OFF

events. Note: the number of events is changed in user settings menu P2 (see table)

l. After the last event time is set, if you were setting Mo. to Fr. the dis-play will display Sa. Su.

m. Repeat steps f. to k. to set Sa. Su times.n. After accepting Sa. Su. final event your TS710 will return to normal

operation.If your TS710 is set for 7 day operation, the option will be given to select each day separately. In 24 hr mode, the option will only be given to select Mo. to Su. together. To change this setting. See user settings P1 in User Settings table.Where the TS710 is set for 3 periods, options will be given to select peri-od 3 times. In 1 Period mode, option will be only given for one ON/OFF time. See User Settings P2.

© Danfoss | FEC | 10.2020 087R1005

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed ma-terial. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logo-type are trademarks of Danfoss A/S. All rights reserved.

Danfoss A/SHeating Segment • danfoss.com • +45 7488 2222 • E-mail: [email protected]

User Settings

a. Press button for 3 seconds to enter the parameter setting mode. set the parameter range via or and press OK.

b. To exit parameter setup press , or after 20 seconds if no button is pressed unit will return to main screen.

No. Parameter settings Settings range Default

P1 Working mode01: Schedule timer 7 day02: Schedule timer 5/2 day03: Schedule timer 24hr

02

P2 Schedule periods01: 1 period (2 events)02: 2 periods (4 events)03: 3 periods (6 events)

02

P4 Timer display 01: 24hr02: 12hr 01

P5 Auto daylight saving 01: On02: Off 01

P7 Service due setup Installer setting only

Display & NavigationsSymbols Function description Symbols Function description

Mon–Sun Current set day Holiday mode

Current on/off period Schedule setup(menu access*)

Schedule setup OKConfirm settings(Date and time setup*)(Reset**)

AM PM

Current set time / parameter setup

Menu navigation / day selection (AUTO+1HR function*)

Time and date setup Time and setting changes / channel mode selection

Heating active PR

Program selection(Holiday mode selection*)(Reset**)

Heating channel current mode - -

* To access additional feature press and hold button for 3 seconds.**To reset the timer, press and hold the PR and OK buttons for 10 seconds. The reset is complete after ConF text appear on the display. (**Note: This does not reset service due timer or date and time settings.)

Holiday Mode

Holiday Mode temporarily disables the timing functions when away or out for a period of time.

a. Press PR button for 3 seconds to enter Holiday mode. icon will be shown on the display.

b. Press PR button again to resume normal timings.

Channel Override

You can override the timing between AUTO, AUTO+1HR, ON and OFF.a. Press PR button. CH will flash and current timer function,

e.g. CH – AUTO.b. With channel flashing press or buttons to change between AUTO,

AUTO+1HR, ON and OFFc. AUTO = the system will follow programmed schedule settings.d. ON = the system will remain constant ON until the user changes the

setting.e. OFF = the system will remain constant OFF until the user changes the

setting.f. a. AUTO+1HR = To boost the system for 1 hour press and hold the

button for 3 seconds.f. b. With this selected, the system will remain ON for an extra hour. If

it is selected while the programme is OFF, the system will switch ON immediately for 1 hour then resume programmed times(AUTO mode) again.

Display and Navigation Details

SCHEDULE OF LIMITATION PERIODS in Civil Matters in … · SCHEDULE OF LIMITATION PERIODS in Civil Matters in New South Wales ... Limitation Act 1969: ... SCHEDULE OF LIMITATION PERIODS

Local Schedule EL - Texas · Web viewThis schedule establishes mandatory minimum retention periods for records that are usually found in all local governments, regardless of type

Cryptographic Embedded Controllerww1.microchip.com/downloads/en/DeviceDoc/CEC1702-A...32-bit Basic Timer 2 16-bit Counter/Timer 4 Capture Timer 4 Compare Timer 1 Watchdog Timer (WDT)

August - Edl€¦ · August 1 2 Summer Office Hours ... Block Schedule (Periods 3-1) ... Guest Speaker Punt, Pass & Kick Sign-Ups 26 Block Schedule (Periods 3-1) Internat ional

Subject Title - uCozinstapalakkad.ucoz.com/S_5_Syllabus.doc · Web viewSubject Title : Digital Instrument Principles Subject Code : Periods / Week : 4 Periods / Term : 72 TIME SCHEDULE

K3 Program Details - Nakornpayap International School · 2018-10-24 · K3 Program Details 2017/18 The ECC K3 program at NIS operates on a weekly schedule of 30 periods (6-7 periods

PCF2127 Accurate RTC with integrated quartz crystal for ... · timer periods from less than 1 ms to greater than 4 hours (see Table 58 ). Either the watchdog timer or the countdown

GENERAL RECORDS RETENTION SCHEDULE FOR …067FFB58-E3CD-42BA-9FB1-11EFC7933… · This City General Records Retention Schedule establishes minimum retention periods for city records

SCHEDULE OF LIMITATION PERIODS · s6.13(1) MAIA s6.13(2) MAIA s6.13(3)(a) and (b) MAIA s7.33 MAIA PERSONAL INJURY. SCHEDULE OF LIMITATION PERIODS in Civil Matters in New South Wales

PowerPoint ® Presentation Chapter 6 Programming PLC Timers and Counters Timer and Counter Instructions Timer Instructions Timer Instruction Words Timer

AGREEMENT Between THE BOARD OF EDUCATION UNIFIED … · 2020. 8. 3. · 2009-2010 TEACHER SALARY SCHEDULE..... 60 2009-2010 SUPPLEMENTAL PAY SCHEDULE ... periods before and after

Regular Schedule · Web viewFINALS – (Final Exam Schedule – Periods 1,3,5,7) 2 1 FINALS – (Final Exam Schedule – Periods 0, 2,4,6) 2 1 End of 1 st semester 22 Local Holiday

 · Web viewAll students who have two release periods must schedule them consecutively (i.e. 1st and 2nd, 7th and 8th) or have them scheduled 1st and 8th periods. If a student chooses

33-00406 09 - RTH8500 Series...Note: You can change default MO-FR, SA-SU schedule here. To edit periods during days, To edit periods during days, temperature setpoints, or to turn

SCHEDULE OF LIMITATION PERIODS - Gerard Malouf & … · Note that Limitation Act does not apply and there is no suspension of time ... Schedule of Limitation Periods in Civil Matters

ADMINISTRATIVE POLICY ON SALARY SCHEDULE ... Table of Contents PAYROLL PERIODS 2016-16 6 ADMINISTRATIVE POLICY ON SALARY SCHEDULE PLACEMENT, COLLEGE …

MDVR-210 USER MANUAL V1.6 - Neatcom€¦ · Web viewSetup the timer recording time periods, everyday can be set to two periods. Move the cursor to "Timing Recording" and press [OK]

Lecture 9 Timer Operations and Programming. 2 Introduction Summary of timers Timer programming sequence Summary of timer SFRs Timer 0: 8-bit

Timer/ Counter definition Prescaler and interrupt in timer ... · Both PIC16f887 and 877A have three timers:- Timer 0, Timer 1, and Timer 2. Timer 0 is 8-bit and can also be used

ACTION PLANS & implementation schedule This Action Plan covers six class periods as follows:

District Court Record Retention · PDF fileThe District Court Record Retention Schedule ... Sets minimum time periods for keeping court ... Daily schedule of activity before the

555 timer. 555 timer; - What is the 555 timer? - Pin configurations of the 555 timer ; - 555 timer in astable operation ; - 555 timer in monostable operation

Timer T200 - FACCH and SDCCH Supervision Timer

Timer Steckverbinder Timer Connectors · 2017. 9. 23. · Timer Steckverbinder Timer Connectors Catalog 889759 Issued 11-01 GLOBAL AUTOMOTIVE DIVISION TIMER - Cover 09.11.2001 13:33

May 15, 2013 Algebra 1. Test Setup 2 Modules 3 periods in AM (Module 1) Adjusted Lunch Schedule 3 Periods in PM (Module 2) Periods will run 1, 2, 3, 4,

Daikin VRV Schedule Timer Manual

MISC069 Interval Timer Remote User Instructions … Operation Instructions HART Interval Timer INTERVAL TIMING FOR ALTERNATE WORK/REST PERIODS 1. Press Timer to enter into alternate

Covers everything from the beginning of the year!!! Midterm Schedule: Monday, Jan 14, 2013 – Periods 2 and 6 Tuesday, Jan 15, 2013 – Periods 3 and 7 Wednesday,

Milton M. Somers Middle School · 2 days ago · Bell Schedule 8 Period Day 6 classes each day • Two periods of Math everyday • Two periods of Language Arts everyday • One period

Assessment Reference Periods - content.ccrn.comcontent.ccrn.com/cce/pdf/conferences/rehabsummit/attendee_info/2009... · Assessment Reference Periods MDS Assessment Schedule Assessment

LM555 LM555 Timer Timer General Description Features

Midterm Schedule Thursday January 28 (Periods 1 and 5) Friday January 29 (Periods 2 and 6) Monday February 1 (Periods 3 and 7) Tuesday February 2 (Periods

General Retention and Disposal Schedule (GRDS) Lite€¦  · Web viewThe Lite classes do not cancel out the minimum retention periods for records, as authorised in the full schedule,

Style Timer Controller - Flush Style Timer Controller

PVHS Incoming 9th Grade Parent · The Block Schedule alternates between A-days (periods 1,2,3) B-days (periods 4,5,6) ... question and undertake independent research ... Myth Busters!