triac - · pdf filethe dimming range parameters adopted lutron dimming system as testing...
TRANSCRIPT
Output Power Range:
Overload Power Limitation:
1~150W
1
I/P-O/P: 3750Vac I/P-GND: <1800Vac
≥102%~125%
www.ltech-led.com
TD 150 12-E1M1- -
LED Intelligent Driver
Frequency:
Efficiency:
Inrush Current(typ.):
Leakage Current:
Output Current:
Output Voltage:
Output Voltage Range:
Ripple & Noise:
Output Power:
50/60Hz
≥85%
I/P-O/P: <0.5mA/230Vac
Max. 12.5A
12Vdc
Max. 150W
Cold start 50A cat 230Va tc: 85°C ta: -30°C ~ 60°C
20 ~ 95%RH, non-condensing
-40 ~ 80°C, 10~95%RH
±0.03%/°C(0-50°C)
Working Temperature.:
Working Humidity:
Storage Temp., Humidity:
Temp. Coefficient:
Vibration:
Main Characteristics
Protection
Dimming Interface:
Dimming Range:
Triac / ELV
Max. 0.1~100%.
12Vdc ±0.5Vdc
≤200mV
10~500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes
1
Input Current: 230Vac≤0.8A
273×57×37mm(L×W×H)
278×59×42mm(L×W×H)
605g±10g
Others
Dimension:
Packing:
Weight(G.W.):
Safety & EMCWithstand Voltage:
Isolation Resistance:
Safety Standards:
EMC Emission:
EMC Immunity:
I/P-O/P: 100MΩ/500VDC/25°C/70%RH
IEC/EN61347-1, IEC/EN61347-2-13
EN55015, EN61000-3-2 Class C, IEC61000-3-3
EN61000-4-2,3,4,5,6,8,11, EN61547
Dimensions
Input Voltage Range: 200-240Vac ±10%
Shut down the output when non-load Voltage≥13~18V, auto recovers after fault condition is removed.
Over Voltage Protection:
Shut down automatically if short circuit occurs,auto recovers after faulty condition is removed.
Shut down the output when Current Load≥
102%~125%, auto recovers after faulty conditionis removed.
Over-heat Protection:
Over Load Protection:
Short Circuit Protection:
Shut down the output when PCB temp.≥110°C, auto recovers when temp. back to normal.
150 12.5A 12VdcW
Apply to leading edge and trailing edge TRIAC dimmers.
PWM digital dimming, no alter LED color rendering index.
Dimming range: Max. 0.1~100%.
.Efficiency > 85%
Short circuit / Over-heat / Over load / Over voltage protection.
Compliant with Safety Extra Low Voltage standard.
Suitable for indoor environments.
Dimming interface: Triac/ELV.
Attn: LUTRON is registered trademarks of Lutron Electronics Co., Inc. registered in the U.S. and other countries
The dimming range parameters adopted LUTRON dimming system as testing standards. The parameters may differ by using Triac/ELV dimming systems of different brands.
customize program forWe can clients' high requirements.* R
R
Triac
2
Connections
Update Time: 2016.10.31www.ltech-led.com
Triac Dim
Selecting between ordinary dimmer and dimming system
Turn off the power and then remove the housing of the LED driver to find right component on the PCB.
Shift system by selecting different contact pin (For installation professionals use only). Factory default as
common (For ordinary dimmer).
Ordinary dimmer
Dimming system
Ordinary dimmer and dimming system have different dimming precision, precision of dimming system is higher. To meet customers' requirements on perfect dimming effects, we LTECH designed two programme options.
Method:
common
system
0~100% Dimming
Triac