Tri-Tech Medical Inc.

Medical Gas Outlets

Medical Gas Outlets DISS Ohmeda style Allied style Puritan style

Recessed wall DISS Recessed ceiling Surface wall Console / Headwall Ambulance / Surgical Arm

Common Backs

Recessed/Console 360º swivel inlet tube 1/2” OD copper tubing Accommodates all styles of

Outlet Latch Plates ETL listed

Ambulance/ Surgical Arm 360º swivel inlet tube DISS or hose barb Accommodates all styles

of Outlet Latch Plates ETL listed

DISS Outlets Frontall™ design Gangable Full faceplate color coding 5 inch centers Primary & secondary

checks 360° positioning of

extension tube

DISS Surface Outlets

Frontall™ design Full faceplate color

coding Primary & secondary

checks

Frontall™ Feature Allows routine service of

both the primary and secondary check valves without removing the nameplate or gas specific portions.

Very fast & easy to service

Primary check cartridge

Repairing DISS Front Bodies These parts would be ordered separately

Cartridge (Negative and Positive gases) Primary Check Seat and Ball Check (Positive gases

only) Chrome-Plated Body

Ohmeda Style Outlets

Ohmeda Style Outlets

Accepts Ohmeda gas specific compatible male adaptors

Gangable 5” centers Allows routine service of both

the primary and secondary check valves.

Full faceplate color coding

Ohmeda Style Surface Outlet

Accepts Ohmeda gas specific compatible male adaptors

Allows routine service of both the primary and secondary check valves.

Full faceplate color coding

Repairing Ohmeda style fronts

Remove screws Remove body and plate

U-clip and washer remain.

Front body and plate

Replace body Replace plate and screw

XQ1000-D Ohmeda style Front Latch Body

Can be ordered as an assembly, or in parts

Allied Style Outlets

Allied Style Outlets Accepts Allied style gas

specific compatible male adapters

Gangable, 5” centers Full faceplate color coding 1/2” OD copper tubing Metal back and front plates 360º swivel inlet tube

Allied Style Surface Outlets

Accepts Allied gas specific compatible male adapters

Full faceplate color coding

Repairing an Allied Style Front

Remove screws Remove body and plate

Position o-ring and washer on new body

Place body on housing and replace plate

Replace Screws

XA1000-D Front Latch Body

Can be ordered as an assembly, or in parts

Puritan Style Outlets

Puritan Style Outlets Accepts Puritan style gas

specific compatible male adapters

Gangable, 5” centers Full faceplate color coding 1/2” OD copper tubing Metal back and front plates 360º swivel inlet tube

Puritan Style Outlets

Accepts Puritan gas specific compatible male adapters

Full faceplate color coding

Repairing a Puritan Style Front Using manual

screwdriver, remove screws

Remove body and small plate

Remove ONLY these parts

Replace parts or entire body

Screw plate back in place with Manual screwdriver.

Do not over tighten

XP1000-E Puritan Latch Body

Can be ordered as an assembly or in parts

Console / Headwall Outlets

Available in DISS, Ohmeda, Puritan and Allied styles

DISS style includes Frontall™ features

Full faceplate color coding

Optional trim plate available

Console / Headwall Outlets

Console / Headwall Outlets

Ambulance / Surgical Arm Outlets

Available in DISS and Quick Connect styles

DISS and hose barb inlet connections

DISS includes Frontall™ features

Full faceplate color coding

DISS x ¼” npt outlets andDISS x hose barb outlets

Fairfield Rail

Fairfield Rail Outlets

Three different styles

Outlet Conversion Kits

Conversion Kits

Conversion Kit - Disassembly

Conversion Kits - Disassembly

Conversion Kits - Installation

Trim Plates

Single gang through six gang Large array of on center spacing Can be customized to meet your needs

Ohmeda to Ohmeda Conversion Kits

Available for Diamond I to Diamond III

Available for Diamond II to Diamond III

Easy to install Easy to service

Other Ohmeda Conversion Kits

Available for Melco/Foregger/Linde 9/16-18 and Chemetron/NCG to Diamond III

Easy to install and service

NFPA 99 REQUIREMENTS FOR STATION OUTLETS/INLETS TRI-TECH PRODUCT

GAS SPECIFIC YES

STATION OUTLET TO HAVE PRIMARY AND SECONDARY CHECK YES

STATION INLET TO HAVE PRIMARY CHECK (SECONDARY CHECK PERMITTED) YES

SECONDARY VALVE TO CLOSE WHEN PRIMARY VALVE IS REMOVED YES

EACH OUTLET/INLET LEGIBLY IDENTIFIED ACCORDING TO 5.1.11.3 YES

THREADED OUTLETS/INLETS SHALL COMPLY WITH CGA V-5 (DISS) YES

STATION OUTLET/INLET COMPONENTS THAT ARE GAS SPECIFIC NOT INTERCHANGEABLE YES

COPPER TUBES ON STATION OUTLETS SHALL BE 3/8 OD MIN AND LESS THAN 8 INCHES LONG YES

COPPER TUBES ON STATION INLETS SHALL BE ½ OD MIN AND LESS THAN 8 INCHES LONG YES

ADDITIONAL TESTING PERFORMED BY TRI-TECH INITIAL PRESSURE TEST AND FINAL TIE IN TEST REQUIRED FOR LEAKAGE AS WELL AS THE OPERATIONAL PRESSURE TEST REQUIRED FOR FLOW IS PERFORMED ON ALL STATION OUTLETS/INLETS PRIOR TO SHIPPING

Tri-Tech Medical Inc.

Gas Control Panels and

Gas Control Panel Conversion Kits

Gas Control Panel Stainless steel front Self-relieving regulator Frontall™ DISS outlet

features High quality ball valve Painted steel rough-in

box 2” Inlet & outlet pressure

gauges

TRI-TECH MEDICAL GAS CONTROL PANELS: FEATURES INCORPORATES A SELF RELIEVING REGULATOR SUPPLY GAGE AND DELIVERY GAGE CARTRIDGE STYLE DISS OUTLET FOR EASY SERVICING USER INSTRUCTIONS ON THE PANEL OUTLET RISER FOR FEEDING DOWNSTREAM EQUIPMENT OR ADDITIONAL OUTLETS CAN DELIVER UP TO 250 PSI WITH AN ADEQUATE SUPPLY PRESSURE CAN BE ORDERED WITH A DISS NITROGEN, INSTRUMENT AIR, OR CARBON DIOXIDE OUTLET NP100 - NITROGEN DISS 1120 IP100 - INSTRUMENT AIR DISS 2080 CP100 - CARBON DIOXIDE DISS 1080

MIDAS REX EQUIPMENT: APPROX 5% OF TOOLS IN FIELD ARE OLDER TOOLS REQUIRING 50

- 200 PSI - 900 CFH - 425 LPM NEW TOOLS REQUIRE 20 - 120 PSI - 720 CFH - 340 LPM OR 481 CFH - 227 LPM NITROGEN CONTROL PANEL MAXIMUM FLOW CAPACITY BASED ON 180 PSI INLET FLOWING TO ATMOSPHERE STATIC DEL FLOW FLOW DEL PRESS PRESSURE PSIG SCFH LPM FLOWING PSIG 100 930 440 96 110 1030 486 106 120 1110 524 114 130 1150 543 119 150 1175 555 120 170 1180 557 120

Gas Control Panel Conversion

Converts existing panels by several major brands

Same features as our regular panel

Easy to install using a universal mounting plate over existing back box

Gas Control Panel Conversion

Existing back box

Gas Control Panel Conversion

Installing conversion connections

Gas Control Panel Conversion

Installing conversion plate

Gas Control Panel Conversion

Back of the front panel conversion

Gas Control Panel Conversion

Connecting tube

Gas Control Panel Conversion

Installing gas control panel