trends in materials: the smartphone driverelectroiq.com/wp-content/uploads/2015/04/rev7ap1.pdf ·...

J.O.B. Technologies (Strategic

Marketing, Sales &

Technology)

1

Trends In Materials: The

Smartphone DriverSmartphone ICs Driving Technology to 3-

D Stacked Devices/Chips, 3-D FinFET

Transistors and High Mobility Channel

Material From 20/22nm Production to

5/7nm Exploratory ResearchJohn Ogawa Borland

J.O.B. Technologies

Aiea, Hawaii

www.job-technologies.com

April 30, 2015

Outline Introduction: Smartphone as new technology driver

2012: iPhone 5 uses Sonys 3-D stacked backside CMOS image sensor camera

2015: 1) Samsung Galaxy S6 and Apple iPhone 6s A9 application processors

switches to 14/16nm 3-D FinFET. 2) Samsung Galaxy S6 introduces 3-D ePoP

(embedded package on package)

22/20nm Node: Smartphone Application Processor 2014-2015

using 3-D bulk-FinFET from Intel (China low end smartphones),

2-D planar by TSMC and Samsung (A8-iPhone6 & Galaxy-S5)


3-D bulk-FinFET 1st generation by TSMC & Samsung (Galaxy-

S6 and A9-iPhone6s), 2nd generation by Intel

10/7nm Node: High mobility material SiGe or Ge Fin channel

Formation

Exploratory Research 5nm Node: High mobility material

Nano-wire channel formation

Dopant Activation and Junction Leakage in Ge and SiGe

Summary2


Marketing, Sales &

Technology)

3

2014 total smartphone sales were 1.24B units.

Q4/14=367.5B smartphones

Q1/15=71.7B PC/tablets

2014=$336B


Marketing, Sales &

Technology)

4

USA Today March

4, 2015


Marketing, Sales &

Technology)

5

2014 total=1.24B smartphones

#1 Samsung=26% (307M units)

#2 Apple=15% (191M units)

i4s i5 i5s&5c i6

S3 S4 S5 S6

Company 4Q14

Units

4Q14 Market

Share (%)

Apple 74,832 20.4

Samsung 73,032 19.9

Lenovo* 24,300 6.6

Huawei 21,038 5.7

Xiaomi 18,582 5.1

Others 155,701.6 42.4

Total 367,484.5 100.0

Gartner, March 6, 2015

2014: 1.87B Total Mobile Phones (Smartphones + standard cell phones)


Marketing, Sales &

Technology)

6

Company 2014

1000x Units

2014 Market

Share (%)

2013

1000x Units

2013 Market Share

(%)

Samsung 392,546 20.9 444,472 24.6

Apple 191,426 10.2 150,786 8.3

Microsoft 185,660 9.9 250,835 13.9

Lenovo* 84,029 4.5 66,463 3.7

LG Electronics 76,096 4.0 69,094 3.8

Huawei 70,499 3.8 53,296 2.9

TCL Communication 64,026 3.4 49,538 2.7

Xiaomi 56,529 3.0 13,423 0.7

ZTE 53,910 2.9 59,903 3.3

Sony 37,791 2.0 37,596 2.1

Micromax 37,094 2.0 25,431 1.4

Others 629,360 33.5 587,764 32.5

Total 1,878,968 100.0 1,808,600 100.0

Company 2014

1000x Units

2014 Market

Share (%)

2013

1000x Units

2013 Market

Share (%)

Samsung 307,597 24.7 299,795 30.9

Apple 191,426 15.4 150,786 15.5

Lenovo* 81,416 6.5 57,424 5.9

Huawei 68,081 5.5 46,609 4.8

LG Electronics 57,661 4.6 46,432 4.8

Others 538,710 43.3 368,675 38.0

Total 1,244,890 100.0 969,721 100.0

Gartner, March 6, 2015

Cell-P

85M

0M

3M

2M

19M

634M

Smartphones Cell-P145M

0M

839M


Marketing, Sales &

Technology)

7

2005 2007 2009 2012 2014

Jan 16, 2013 Intel announced at Consumer

Electronics Show new Atom platform for

rapidly growing low-end smartphone market

in China!


Marketing, Sales &

Technology)

8

& msec Flash

SF-stressor

Intel, Sept. 6, 2011

Altera to use Intel 14nm Foundry reported by EETimes Feb 26, 2013: The Mobile Foundry will ramp

to billions of IC chip units across many suppliers while the PC chip TAM is only 400M units so mobile

chip market potential to be 10x larger in size than PC and Intel wants to get part of this to continue their

growth which was -1% in 2012! (Q1/2015 smartphone AP= >5x PC!)

A5 A6 A7 A8 A9

45nm 32nm 28nm 20nm 14/16nm


Marketing, Sales &

Technology)

9

9/9/14: Apple announces A8 SOC for iPhone 6 & 6+:

ApplesA8 is their first SoC built on 20nm node technology with 2B

transistors and is 13% smaller than the A7 for 25% faster CPU than the A7. Compared

to iPhone 1, iPhone 6 CPU performance is 50x as shown in the slide photo below left

and table below.

iPhone 5 uses A7: 28nm node technology from Samsung/foundry

iPhone 6 uses A8: 20nm node technology from TSMC

Next iPhone Sept 2015 will use A9: 14nm node FinFET from Samsung

& 16nm FF+ from TSMC


Marketing, Sales &

Technology)

10Wakabayashi

3-D stacked devices

-CMOS image sensor

-Flash

-DRAM

Low leakage

3-D FinFET


Marketing, Sales &

Technology)

11

J.O.B.Technologies

(StrategicMarketing,Sales&Te

chnology)

12

No Micro-Lensing for

Backside Illumination

Infrared Filter

Color Filter Optional

Transparent Electrode (ITO)

Buried Photodiode

Quartz

Poly

n+n+Silicon

(Thin or Thick)

Oxide

n+

Poly

Contact

Light Shield

(Opaque)

3-D

Buried Photodiode

(Silicon on Glass)

Borland & Tokoro, Nov 2004, Asia Pacific,

Solid State Technology, p. S18

Sony Front-Side versus Back-

Side Illumination Patent

Application US 2003/0025160A1

Jan & July 2012

J.O.B. Technology (Strategic

Marketing, Sales &

Technology)

13

DRAM 3-D Capacitor Cell


Marketing, Sales &

Technology)

14

1987 IBM 4Mb DRAM Trench Capacitor Cell:

1st high volume production use of CMP for

planarization of poly trench fill and selective

silicon for local strap/interconnect.

1999 Samsung DRAM HSG-

poly-Si Stack Capacitor Cell


Marketing, Sales &

Technology)

15

DRAM 3-D Memory Array Transistor


Marketing, Sales &

Technology)

16

IBM 32nm 3-D Stacked

DRAM-Die + Logic-Die

in 1 Package with TSV

(through-silicon-via)


Marketing, Sales &

Technology)

17

IEDM-2014 Paper 3.8 by Lin of IBM/EFK not Alliance on High Performance 14nm

SOI FinFET CMOS Technology with 0.0174um2 embedded DRAM and 15 Levels of

Cu Metallization.

eSiGe


Marketing, Sales &

Technology)

18

Bez, ST, IEDM-2011 short course

2015

256Gb

128Gb

$0.50


Marketing, Sales &

Technology)

19

3-D NAND Flash market delayed was reported Feb 19, 2015 in Semiconductor Engineering:

Only Samsung in production with 3-D NAND Flash since 2013. Micron/Intel will start

production 2nd half of 2015 and SK Hynix plans pilot production later in 2015. SanDisk/Toshiba

3-D NAND not until 2016 and Spansion/XMC not until 2017. Today Samsung has 128Gb Flash

using 16nm node technology and can achieve same die area at 128Gb with 32-layer 3-D NAND

based on 40nm technology node but to compete price per bit with 3-D NAND requires >48-

layers! 128Gb Flash memory stick $64 at Best Buy (50/Gb). Below is Samsungs 32-layer 3-D

NAND chip reported by Chipworks Aug 2014.


Marketing, Sales &

Technology)

20

Samsung mass producing high-density ePoP memory for

SmartphonesSamsung on Feb10, 2015 announced that they will be mass producing the extremely

thin ePoP (embedded package on package) memory, a single memory package

consisting of 3GB LPDDR3 DRAM, 32GB eMMC and a controller for use in high-end

smartphones. Replacing that set-up with a Samsung ePoP reportedly decreases the total

area used by approx. 40%. Samsung is basically stacking all the memory, both RAM

and NAND, on a single ePoP module thats then positioned on top of the processor,

rather than beside it as shown below. It is rumored to be speced in the Galaxy S6 and

other top mobile devices later this year.Solid State Technology reported Feb 10, 2015

Samsung Galaxy S6 to be introduced on April 10, 2015













Formation




Summary21

22

Borland disagree, I say amorphous

implant EOR defects not n+ SEGDick James, X-TEM, Chipworks, April, 2012

Intel 22-nm nMOS Epi or Not? To understand Intels 22nm FinFET process details you must know what they did for 32nm planar!

Intel IEDM-2012 paper 3.1 on 22nm Tri-gate

SoC Technology


Marketing, Sales &

Technology)

23

Like for 32nm planar production in 2009!

-pMOS: SDE-implant, S/D recess etch then eSiGe

-nMOS: SDE-implant, S/D -implant with amorphous-P+Carbon+ Stacking Fault stressor and

raised S/D epi


Marketing, Sales &

Technology)

24

Looks like 45nm eSiGe Looks like 65nm eSiGe

?

Defect layer?

Intel-SoC, IEDM-2011 & 2012


Marketing, Sales &

Technology)

25

Prof. Ogura, Meiji Univ. July -2012

Intel 32nm PC Chip

Below

detection

Below

detection

As n+SDE

below

detection

Chipworks Teardown of Intel

22nm pMOS FinFET

26

Dick James, Chipworks, Semicon/West 2013 WCJUG meeting

32nm


Marketing, Sales &

Technology)

27

Mobility IDRelax-Si 1 1

Strain-Si 10x 1.8x

Relax-Ge 4x 2x

Strain-Ge 25x 2.5x

90nm 65nm 45nm 32nm 22nm

14nm

Kirshnamohan et al., Stanford Univ. ,

VLSI Sym 2006, section 18.1

S. Thompson, U of F, VLSI Sym 2006 short course

Ge-channel

Next?

17% 22% 30% 40% 55%

Kuhn, Intel,, ECS Oct 2010

Maxed out need Ge!

Chipworks Teardown of Intel

22nm nMOS FinFET

28

Phos-implant?

Phos doped Epi S/D has no recess etch!

Amorphous S/D stressor implant

Dick James, Chipworks, Semicon/West 2013 WCJUG meeting

Need to look for As also!

32nm

32nm

Ogura, Meiji Univ.


Marketing, Sales &

Technology)

29

But Pss~1.8E21/cm3 so this

must be chemical and not

electrical!

IIT-2014 nFinFET Doping Paper by Intel

4/27/2015 30

Pipes et al., Intel, IIT-2014, p. 37

Dick James, Chipworks


Marketing, Sales &

Technology)

31

Nagayama, Nissin, IWJT-2010 paper 3.4

Box-like profile for P

when C dose increases

between 1-2E15/cm2

Pss=1.5E20/cm3

2.3nm/decade

5.8nm/decade

15.1nm/decade

32nm

22nmDick James, Chipworks

Ogura, Meiji Univ.


Marketing, Sales &

Technology)

32

Borland et al., JOB/Nissin/Applied/KT/EAG/Toshiba, IEEE-RTP-2009

Amorphous implant boosts C-stressor by 50%!


Marketing, Sales &

Technology)

33

Arsenic-SDE and Phos-S/D causes amorphization of

Fin so SPE forms Carbon+Stacking Fault Stressor

Dick James, Chipworks, Semicon/West 2014 discussions


Marketing, Sales &

Technology)

34

My Sony contact in July 2012

said 8 degree Fin slope for (551)

plane reported by Tokoku Univ

in 6/2007!

Ohmi, Tokoku Univ, SSDM-2013

FinFET Doping Options3-D FinFET require some form of S/D extension doping under the side wall

spacer for gate overlap control. Two basic method of doping are either:

Direct junction doping by implantation with or without diffusion using:

1)Beam-line high tilt implantation for electrical conformal doping using amorphous

SPE dopant activation (JOB Tech Insight-2009 and Intel doing for 22nm FinFET)

2)Plasma implantation for chemical conformal doping (IMEC and others reported

not really conformal)

3)Plasma deposition followed by tilted beamline knock-in doping (SEN SSDM-10)

Deposited doped layer requiring lateral dopant diffusion using:

1)Plasma deposition doping and diffusion (IMEC reported, limited by dopant solid

solubility)

2)Doped epi deposition and diffusion (IBM reported, limited by dopant solid

solubility)

3)Monolayer deposition and diffusion (Sematech/CNSE reported, poor dopant

solid solubility limited)

Hydrogen surface passivation for highest retained dose and controlled amorphous

junction depth


Marketing, Sales &

Technology)

36

Single & Multi-FINFET Double-Gate Devices

Y.K. Choi et al, IEDM-2001

Plasma Doping for Multi-FIN Gate/Poly

High Tilt Implant For LG-SS/D

Asymmetric n+/p+ Poly/Gate

Borland, Moroz, Iwai, Maszara & Wang, Varian/Synopsys/TIT/AMD/TSMC,

Solid State Technology, June 2003


Marketing, Sales &

Technology)

37

Intel IIT-2014: Very good conformal Fin doping with 45

degree tilted As-implantation.

Applied IIIT-2014: Poor 10x worse conformal Fin

doping with plasma!

IWJT-2011 paper S8-2 by

Vandervorst of IMEC

showing very good

conformal carrier

concentration

IWJT-2011 paper S2-1 by

Sue Felch of IBS severe

loss of plasma dopant after

annealing!


Marketing, Sales &

Technology)

38

SEN, SSDM-2010


Marketing, Sales &

Technology)

39

Kennel, Intel, IEEE/RTP 2006

Boron activation limited

by low Bss (Boron solid

solubility) and not by

implanted dose

With SPE Non-Equilibrium

Activation of Boron >>Bss

But Requires Amorphization!

5.7E20/cm3

Any deposition doping requires lateral

diffusion which will be limited by dopant

solid solubility activation unless amorphous

SPE or LPE as shown by Intel.


Marketing, Sales &

Technology)

40

High Tilt p+ & n+ Molecular

Implantation For 3-D Structures:

Retained Chemical Dose Versus

Electrical Activation Limited

Conformal DopingJohn Ogawa Borland

J.O.B. Technologies, Aiea, Hawaii

&

Masayasu Tanjyo, Tsutomu Nagayama and Nariaki Hamamoto

Nissin Ion Equipment, Kyoto, Japan

INSIGHTS 2009

April 28, 2009

Especially with

msec Annealing


Marketing, Sales &

Technology)

41

B Needs PAI or MSA >1300C!


Marketing, Sales &

Technology)

42

IWJT-2011 paper

S8-2 by IMEC

Duffy et al., INSIGHTS May 2007

Tri-Gate Aspect Ratio

1 to 1 so 45 to 63.5

degree tilt is OKThinner

Photoresist

Dummy Fin

Bulk FinFET

Oxide &

Not BOX Silicon!

Influence of Surface Passivation on B,

B18H22 and B36H44 Retained Dose for USJ


Marketing, Sales &

Technology)

44

My IWJT-2011 S7-3 paper. My message was that for Tri-Gate with a 1

to 1 aspect ratio a dual mode 63.5 degree tilt implant for the Fin will

give you equal 100% chemical conformality on the top and side wall of

the Tri-gate Fin especially when you use hydrogen surface passivation

compared to oxide surface passivation at high tilt angles and/or low

energies. (NOT AN ISSUE WITH ROUNDED FIN-TOP)

Flat Fin-Top Round Fin-Top

PCOR-SIMS Analysis Of Surface Oxide &

Retained Dose

45

0.0

0.5

1.0

1.5

2.0

2.5

3.0

0 10 20 30 40 50 60 70 80 90 100

Implant Retained Dose %

Su

rfac

e P

assi

vat

ion

Ox

ide

Th

ick

nes

s (n

m)

B36(R)

B18(R) B(R)

B(R)

B18 & B36(R)

As & As4

P4P

Hydrogen Bake

Surface Passivation

1 month later

Proof Of Surface Reflectance/Backscatter On

Retained Dose Limit & Implant Oxide Growth


Marketing, Sales &

Technology)

46

Ge Ox Xj R.Dose

H2 6.9nm 0.2nm

B 7.0nm 0.57nm 8.3nm 8.89E14

B18 6.9nm 0.45nm 7.7nm 8.44E14

B36 6.9nm 0.46nm 8.6nm 8.35E14

Ox 6.9nm 1.8nm

B 7.0nm 2.05nm 7.7nm 8.0E14

B18 6.7nm 2.18nm 7.6nm 6.09E14

B36 6.9nm 2.3nm 9.6nm 5.96E14

Ge shift due to oxide growth

Implant oxide growth

Renesas/JOB/EAG, SSDM-2010

Hydrogen Annealing of Si & Ge Surface

4/27/2015 Advanced Integrated Photonics, Inc. -

Proprietary47

Round Top

Smooth SidewallLER (line-edge-

roughness)

Hydrogen Bake Causes Si-surface Migration and

Si/oxide Under-cut! Good for Bulk not SOI FinFET

4/27/2015 48

44) M. Arst, J. Chen, K. Ritz, J. Borland and J. Hann, A Novel Simultaneous Single/Poly Deposition (SSPD)

Technique For New And Scaled-Down Device Structures, Semiconductor Silicon 1990, the Electrochemical Society, PV 90-7, p.794, 1990.

45) M. Arst, K. Ritz, S. Redkar, J. Borland and J. Hann, Surface Planarity And Microstructure Of Low Temperature

Silicon SEG And ELO, Journal of Materials Research, the Materials Research Society, vol.6, no.4, p.784, April 1991.

H2 Bake Reduce LER (line-edge-roughness) Not With

SOI-FinFET!


Marketing, Sales &

Technology)

49

iPhone 6 Mother board

iPhone 6+ Mother board


Marketing, Sales &

Technology)

50

D. James, Chipworks, Oct 2014

TSMC, US Patent #8,674,453 B2, 3/18/14

Is SF-stressor+eSiP

epi stressor better?

Intel 32nm

TSMC 20nm Node: Stacking Fault-Stressor 4/5 years

after Intels 32nm Node in 2009













Formation




Summary51

Intel can still use Bi-mode up to 41 degree tilt

implant or Quad-mode >45-60 degree tilt!


Marketing, Sales &

Technology)

52

For 22nm I

said 3 years

ago Intel

could use up

to 52 degree

high tilt

implant.

For 14nm I

estimate Intel can

use up to 41 degree

tilt if twist is 0

degree for bi-mode

but if twist is 45

degree then Quad-

mode >45-60

degree is OK!

8 degree taper=(551) plane &

45+8=53 degree effective tilt

Intel 8/11/14

IEDM-2014 Paper 3.7 by Natarajan of Intel on A 14nm Logic Technology

Featuring 2nd Generation FinFET Transistors, Air-Gapped Interconnects,

Self-Aligned Double Patterning and a 0.0588um2 SRAM cell size.


Marketing, Sales &

Technology)

53

First time Intel is using embedded n+epi for

nS/D which is full of epi stacking faults

sub-fin doping technique of high performance transistor by solid source doping for better punch-

through stopper dopants. Idsat & Idlin for nMOS +15% & +30% and for pMOS +41% & +38%

No discussion on p+ or n+ eS/D stressor! Chipworks

says eSiGe=55% like 22nm node

Intel 14nm nMOS FinFET


Marketing, Sales &

Technology)

54

Dick James, Chipworks, Feb 2015

IEDM-2014 Paper 3.1 by Wu of TSMC on An Enhanced 16nm

CMOS Technology Featuring 2nd Generation FinFET Transistors

and Advanced Cu/low-k Interconnect for Low Power and High

Performance Applications.


Marketing, Sales &

Technology)

55

A disappointment this year as in last year in that

TSMC showed no images nor listed any dimensions

of the FinFET structure so as Dick James of

Chipworks stated in his blog with NO images of the

FinFET we have no idea what the FinFET looks

like (ie tapered or vertical Fins, recess/raised S/D

WITH DUAL EPITAXY PROCESSING).

Samsung

Galaxy S6


Marketing, Sales &

Technology)

56

Dick James, Chipworks, April 6, 2015

Battery

ePOP


Marketing, Sales &

Technology)

57

Samsung Galaxy S6 Dick James, Chipworks, April 6, 2015

eSiGe?


Marketing, Sales &

Technology)

58

SAMSUNG GALAXY S6 EDGE SM-G925V Top Cost Drivers

Itemized Components MfgName Description Total Cost

Display SAMSUNGDisplay / Touchscreen Module, 5.1

Quad HD Super AMOLED,

25601440 Pixels, 577PPI, Dual Edge$85.00

IC Content

Apps Processor SAMSUNG Apps Processor Octa-Core, 64-Bit, 14nm, PoP $29.50

Baseband IC QUALCOMM Baseband Processor Multi-Mode, 28nm, PoP $15.00

Memory

NAND (eMMC, MLC, ) SAMSUNG Flash UFS NAND, 64GB, PoP $25.00

DRAM SAMSUNG SDRAM LPDDR4, 3GB, PoP $27.50

Power Management Ics $5.40

RF / PA Section $12.50

User Interface Ics $9.95

Sensors $4.80

Modules

Primary Camera Module Rear Camera Module 16MP, BSI CMOS, OIS $18.50

Secondary Camera Module Front Camera Module 5MP, BSI CMOS $3.00

BT / WLAN Module(s) MURATA BT / WLAN Module $4.00

Battery Pack(s) ITM Li-Polymer, 3.85V, 2600mAh, 10.01Wh $3.50

Other Noteworthy Items

Box Contents $6.20

Enclosure elementsDie-Cast Aluminum Center Piece &

Machined Aluminum Bottom Piece$12.00

Source: IHS Technology April 2015

39/Gb!













Formation




Summary59


Marketing, Sales &

Technology)

60

Samsung Logic Roadmap, Dec. 2014

4/27/2015 Advanced Integrated Photonics, Inc. -

Proprietary61

IEDM-2013 short course

*2014: SiGe-FinFET at 14nm*2016: Ge-FinFET at 10nm*2018: Nano-wire at 5nm (Si, SiGe and Ge)

IEDM-2014 Paper 16.1 by Hashemi of IBM/GF on First Demonstration

of High-Ge-Content Strained-Si1-xGex (x=0.5) on Insulator PMOS

FinFETs with High Hole Mobility and Aggressively Scaled Fin

Dimensions and Gate Lengths for High Performance Applications.


Marketing, Sales &

Technology)

62

Fig.14 shows hole mobility increases by 2.2x from uh=160 to 400 with

decreasing Fin width (WFIN) due to the transformation of strain from biaxial to

uniaxial. The uh=160 corresponds to a 1E18/cm3 channel doping level for 50%

SiGe in the literature. The uh=400 would be for 80-100% SiGe channel at the

same doping level.

Oct 2014 ECS IBM Alliance paper P7-1791

Need >50% Ge to enhance

hole mobility?

4/27/2015 63

See large variation in reported Ge electron & hole mobilities reported in the literature!

Ge-Cz

U of Tokyo

Electron mobility

Hole mobility

H2 anneal

P or As

Excico

P-JOB laser

Sb-JOB laser

B-JOB laser

IBM

50%

SiGe

p+Fin

4/27/2015 64

IEDM-2013 short course

Borland: Localized Ge-LPE by Laser Melt Oct 2004 ECS: Ge-GCIB/Infusion (E17/cm2)June 2013 IWJT: Ge-plasma implant (1E17/cm2)Oct 2014 ECS: Ge-beamline implant (5E16/cm2)

Blanket Ge-layer first

then Ge-Fin etch

Selective Ge-epi Fin


Marketing, Sales &

Technology)

65

SSDM-2013 Univ of Tokyo Si-Photonics paper K-1-1 on Ge Active Photonic Devices on Si for

Optical Interconnects was a invited review paper so no new data only a review. In Fig.2 below

he showed a 800oC Ge-Epi post anneal can reduce TDD from 109/cm2 to


Marketing, Sales &

Technology)

66

Ge-channel Formation By Ge-Infusion Doping

ALD-HfSiO

1) EOT reduced from

1.46nm to 1.26nm with in-

situ bake due to GeO

eliminationat >430C.

2) Leakage reduced from

0.07A/cm2 to 0.04A/cm2

without bake.

3) pMOS good devices

4) nMOS poor devices

nMOS Ge-channel formation using replacement gate process flow

Borland et al., JOB/ReVera/SSM/Genus/Epion, Solid State Technology, July 2005


Marketing, Sales &

Technology)

67

GCIB Ge-Doping/Deposition (Solid Phase Epitaxy)70nm Ge-DCD on 300mm bulk & SOI wafer


Marketing, Sales &

Technology)

HF-vs-No HF

Cleaning For Ge

Infusion

SSDM-2011: Intel 32nm NodeChannel strain measurements Munehisa Takei1, Hiroki Hashiguchi1, Takuya Yamaguchi1, Daisuke

Kosemura1, Kohki Nagata1, 2, and Atsushi Ogura1

1School of Science and Technology, Meiji University, 1-1-1

Higashimita, Tama-ku, Kawasaki, 214-8571, Japan

3.75GPa 850MPa


Marketing, Sales &

Technology)

70

Localized/Selective Ge & SiGe

Formation By Liquid Phase

Epitaxy (LPE) Using Ge+B

Plasma Ion Implantation And

Laser Melt Anealing

Ge 3keV at 1E16/cm2 (Ge=20%) & 1E17/cm2 (Ge=55%)

B2H6 500V at 4E15/cm2 & 4E16/cm2

Ge+B Plasma Implanted Wafers Provided by Micron

Laser Melt Annealing Provided by Innovavent & Excico

IWJT June 6, 2013

JOB Technology, Micron, Innovavent, Excico, KLA-Tencor, CNSE, EAG & UCLA


Marketing, Sales &

Technology)

71

0

10

20

30

40

50

60

70

80

90

100

110

120

130

140

150

160

170

0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600

Mo

bilit

y (

cm

2V

-1s

-1)

Depth ()

Mobility JA14ED12-1

Drift

0

10

20

30

40

50

60

70

80

90

100

110

120

130

140

150

160

170

0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600

Depth ()

Ge=1E17/cm2 + BH=4E16/cm2

Ge=1E16/cm2 + BH=4E15/cm2

>4x hole-mobility!

ALP Hall Analysis of 308nmSlot#14:Ge=1E16+B=4E15

Slot#18: Ge=1E17+B=4E16

Ge=0%+BH=4E16/cm2

Borland et al., IWJT-2013

Liquid Phase Epitaxy (LPE)

Formation of Localized High

Quality/Mobility Ge & SiGe by High

Dose Ge-Implantation with Laser Melt

Annealing for 10nm and 7nm Node

Oct 6, 2014 ECS Conference on SiGe & Ge TechnologyJohn Borland1,2, Michiro Sugitani3, Peter Oesterlin4, Walt Johnson5, Temel

Buyuklimanli6, Robert Hengstebeck6, Ethan Kennon7, Kevin Jones7 & Abhijeet Joshi8

1JOB Technologies, Aiea, Hawaii2AIP, Honolulu, Hawaii

3SEN, Shinagawa, Tokyo, Japan4Innovavent, Gottingen, Germany5KLA-Tencor, Milpitas, California6EAG, East Windsor, New Jersey

7University of Florida, Gainsville, FL8Active Layer Parametrics, LA, CA


Marketing, Sales &

Technology)

74

1E-03

1E-02

1E-01

1E+00

1E+01

1E+02

1E+03

1E+17

1E+18

1E+19

1E+20

1E+21

1E+22

1E+23

0 10 20 30 40 50 60 70 80

O,S

i,G

e C

ON

CE

NT

RA

TIO

N (

ato

m%

)

Sb

CO

NC

EN

TR

AT

ION

(ato

ms/c

c)

DEPTH (nm)

JOB Sample 3 Si Sb+Ge 3E15 5E16 No Anneal (Sb, Ge)

O->

Si->Ge->

Total Sb

Fig #03 Y0DKY928_YR_37 Sample 3 Si Sb+Ge 3E15 5E16 No Anneal (Sb, Ge)

1/11/2014

1E-03

1E-02

1E-01

1E+00

1E+01

1E+02

1E+03

1E+17

1E+18

1E+19

1E+20

1E+21

1E+22

1E+23

0 10 20 30 40 50 60 70 80

Sb

CO

NC

EN

TR

AT

ION

(ato

ms/c

c)

DEPTH (nm)

JOB Sample 5 Si Sb+Ge 3E15 LMA 4J 1200ms (Sb, Ge)

O->

Si->Ge->

Total Sb

Fig #05 Y0DKY928_YR_38 Sample 5 Si Sb+Ge 3E15 LMA 4J 1200ms (Sb, Ge)

1/11/2014

1E-03

1E-02

1E-01

1E+00

1E+01

1E+02

1E+03

1E+17

1E+18

1E+19

1E+20

1E+21

1E+22

1E+23

0 10 20 30 40 50 60 70 80

O,S

i,G

e C

ON

CE

NT

RA

TIO

N (

ato

m%

)

Sb

CO

NC

EN

TR

AT

ION

(ato

ms/c

c)

DEPTH (nm)

JOB Sample 4 Si Sb+Ge 3E15 LMA 3.2J (Sb, Ge)

O->

Si->

Ge->

TotalSb

Fig #04 Y0DKY928_YR_54 Sample 4 Si Sb+Ge 3E15 LMS 3-2J (Sb, Ge)

1/13/2014

Ge=>7%

350nm

75

0

50

100

150

200

250

300

350

400

450

500

1E+12 1E+13 1E+14 1E+15 1E+16

Mo

bili

ty[c

m2

/V-s

]

Sb Concentration

Electron Mobility

Ge+Sb 3E13 4J/cm2 for 600ns


Sb 3E15 4J/cm2 for 600ns


Ge=100%

Ge=100%Si=100%

Si=100%

4% Ge

Borland et al., ECS Oct 2014

B=4E16

Ge=100%

Ge=25%

Ge=0%

Ge-channel Formation by Ge implant, plasma or

GCIB doping (n+Si-cap S/D doping)

76

nMOS Ge-channel formation using replacement gate process flow

Borland et al., SST July 2005 & US Patent #7,259,036 Aug 22, 2007

Bulk Si-wafer

Ge

or

SiGe

nMOS Ge-Fin/channel nMOS n+ Si-S/D

Si-SEG

n+ S/DBorland proposal March 2012

Bulk Si-wafer

Ge

or

SiGe

OxideOxide Oxide

n+ Si-S/D Ge-channel

IEDM-2014 Paper 16.5 by Mitard of IMEC on First

Demonstration of 15nm WFIN Inversion Mode Relaxed Ge n-

FinFETs with Si-cap Free RMG and NiSiGe S/D.


Marketing, Sales &

Technology)

77

He listed the options for FinFET as follows:

pFinFET nFinFET

-relaxed Ge -relaxed Ge

-strained Ge on SiGe SRB -strain-Si

-strained SiGe on Si -InGaAs/InP on Si

The process flow is listed in Fig.1 below whereby they first grow a heterogenous Ge-epilayer on Si wafer

followed by Well, ground plane and anti-punch through implant. Next was the Fin defined STI etch and low

temperature fill and oxide recess (see Fig.2 of the Ge-Fin after STI oxide recess). After dummy gate they do

tilted Phos implant for extension and B implant for HALO. Following nitride spacer they grow a 45% SiGe

S/D cap followed by HDD Phos implant then junction anneal at


Marketing, Sales &

Technology)

78

1

10

100

1000

10000

100000

1000000

10000000

60 60.5 61 61.5 62 62.5 63 63.5

Series1

JB1-40+76

JB1-40+00

JB1-40-55

JB1-40-74

JB1-40+38

JB1-40+20

1

10

100

1000

10000

100000

1000000

10000000

60 60.5 61 61.5 62 62.5 63 63.5

Series1

Implant Changing Ge-epi Strain (Tensile & Compressive)

JOB/LASSE/WaferMasters

JOB/CNSE/Nissin/LASSE













Formation




Summary79

IMEC: Selective Epi Fin

80

IMEC: Si-Fin SiGe-Fin Ge-Fin InGaAs-Fin













Formation




Summary81

Trumble, Bell Labs, 1959

4/27/2015 Advanced Integrated Photonics, Inc. - 82

Excico P-LMAStanford Sb-LMA

IBM Sb-RTA

As-MLD

As-LSA

Boron Activation in Si & Ge

4/27/2015 83

10

100

1000

0 200 400 600 800 1000 1200 1400

She

et R

esi

stan

ce, (

oh

m/s

q)

RTP Temperature, C

Ge, 5e15/cm2 B

Ge, 5e14/cm2 B

Ge, 5e14/cm2 BF2

Si, 5e14/cm2 B

Si, 5e15/cm2 B

Si, 5e14/cm2 BF2

Ge-Melt 937C

Si-Melt 1407C

BF2 is self-amorphizing

Room temperatureB-activation (acceptor formation ~1E14/cm2)

Boron Rs is dose limited

Borland & Konkola, AIP, IIT-2014

1E+15

1E+16

1E+17

1E+18

1E+19

1E+20

1E+21

0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2

B C

ON

CE

NT

RA

TIO

N (

ato

ms/c

c)

DEPTH (m)

11B

LD047_ym20 Sample GHC1 (B) all data

AIP Ge 5e15 B No Anneal

Carrier Concentration


Zaima, Nagoya U., ECS Oct 2014, paper P7-1772

Room temperatureB-activation (acceptor formation ~1E19/cm3)


Marketing, Sales &

Technology)

85


IEDM-2014 Paper 32.5 by Lee of Univ of Tokyo on Dramatic

Effects of Hydrogen-induced Out-diffusion of Oxygen from

Ge Surface on Junction Leakage as well as Electron Mobility

in n-channel Ge MOSFETs


Marketing, Sales &

Technology)

86

To examine the effects of oxygen they implanted O at 1.0 and 10.0E14/cm2 dose at 100keV

shown in Fig.6 to a depth of 75nm. Fig.7 shows the Ge n+/p junction leakage for Phos implant

50keV/1E15 after annealing 400C to 650C for 30 sec without O-implant and for the 1E13 and

1E14 O-implants. Without Oxygen the lowest n+/p junction leakage is at 600C at 8E-3A/cm2

while with the higher O-implant dose it was 40x lower at 2E-4A/cm2. No data on dopant

activation Rs values in relationship to the junction leakage.

IEDM-2014 Paper 16.5 by Mitard of IMEC on First

Demonstration of 15nm WFIN Inversion Mode Relaxed Ge n-

FinFETs with Si-cap Free RMG and NiSiGe S/D.


Marketing, Sales &

Technology)

87

Results for the Ge n+/p junction leakage is shown in Fig.9 below and Fig.10 shows both p+/n and n+/p

junction leakage in Ge. They also used Ge-PAI to boost the B dopant activation in Ge to ~1E20/cm3 with

500C anneal. Ge n+ junction optimization was required to reduce n+/p Ge junction leakage by 20x from

4A/cm2 to 0.2A/cm2.

Summary: Smartphone the technology driver for 3-D

More Moore and More Than Moore in this Decade! Samsung Galaxy S6 using 14nm 3-D FinFET Application Processor, 16M pixel

CMOS image sensor camera, up to 128Gb Flash memory (2-D planar or 3-D 32-

layers) and thin ePoP (embedded package on package) memory, a single 3-D

memory package consisting of 3GB LPDDR3 DRAM, 32GB eMMC and a controller.

Apple iPhone 6s (Sept 2015) A9 will use 3-D FinFET Application Processor 14nm

from Samsung and 16nm FF+ from TSMC, >8M pixel 3-D stacked backside CMOS

image sensor camera from Sony and 64-128Gb Flash memory.

10nm=2016, 7nm=2018 & 5nm=2020!

High tilt 35-45 degrees bi-mode or quad-mode implantation will continue to be used

for FinFET SDE & S/D doping for 14nm, 10nm and 7nm node.

Amorphous implantation of the Fin is Good as it leads to highest dopant activation and

stressor formation.

Dual recess epi for p+ & n+ S/D stressor at 14nmneed direct high mobility channel/Fin by

10nm!

Ge, SiGe or GeSn high mobility channel-FinFET at 10nm or 7nm node will require

Ge-epi first approach or amorphous-Ge+LPE.

Low Ge n+ junction leakage will require

trends in materials: the smartphone driverelectroiq.com/wp-content/uploads/2015/04/rev7ap1.pdf ·...

Documents