FIRESTOPPING SOLUTIONSFloor-to-floor. Floor-to-wall. Wall-to-wall. Head-of-wall. Curtain wall.If there’s a fire-rated floor or wall, there’s a need for firestopping.Firestopping is required by commercial building codes, including the International Building Code, the Uniform Building Code and theStandard Building Code, to name a few.

Product Type of JointFloor-to-floor Floor-to-wall Wall-to-wall Head-of-wall Curtain wall

TREMstop Acrylic SP X X X X

TREMstop Acrylic (GG) X X X X

TREMstop IA(Intumescent Acrylic) X X X X

TREMstop Silicone(Fyre-Sil) X X X X X

Dymeric 240 X X XExterior Joints Only

Dymeric ULC X X X Available in Canada Only

Tremco offers more than 400 independently tested and listed firestopping systems for the US and Canada.Our testing program is on-going with new systems being added weekly to meet the changing needs of our customers.For the complete list of systems, visit our website at www.tremcofirestop.com

In addition to our broad product line and extensive system library, we offer the following support:■ Engineering judgments with professionally stamped drawings

for specific applications produced in a timely manner on a North American basis

■ Sales representative and technical support on job sites■ Firestopping training – installation or general

PRODUCTS

JOINT APPLICATIONS

SERVICES

SOLUTIONS

Tremco understands construction joints: expansionjoints, control joints, interior joints, exterior joints,all joints. Design the right joint, construct the rightjoint and use the right sealant in the joint. Firestopsealants are no exception. Work with the firestopcompany that treats joints everyday.

TREMstop Acrylic SP

TREMstop Silicone(Fyre-Sil)

PRODUCTSTremco offers a variety of TREMstop products

from sealants to devices to duct wrap to

meet most firestopping applications. For joint

applications, the following products are used.

FPSG-051 02/06

www.tremcofirestop.com

TREMstop Silicone (Fyre-Sil)

Dymeric 240

TREMstop Acrylic SP & (GG)

TREMstop IA (Intumescent Acrylic)

FIRESTOPPING FOR JOINT APPLICATIONSTREMstop Acrylic Spray – The ideal solution for head-of-wall

TREMstop Acrylic SP offers significant labor savings on long joint runs without compromising any of the high-performance characteristics of the gun grade version. TREMstop Acrylic SP is tested for curtain walls with up to a 2 hr fire rating.

TREMstop Acrylic (GG) – A gun grade acrylic firestopping sealant

The most economical and user-friendly sealant on the market,TREMstop Acrylic is a single-component, water-based sealant for both joints and through penetrations. Easy to gun and easy to clean up, this high-performance sealant is specially formulatedfor firestopping applications. It is approved for joints up to 3”with plus or minus 25 percent movement. TREMstop Acrylic (GG)has listings for up to 2 hr in both joints and through penetrations.

TREMstop Silicone (Fyre-Sil) – An all-weather firestopping solution

Our premier sealant, TREMstop Silicone is a single-component,neutral cure silicone available in both a gun grade and non-sag self-leveling formula that can be applied in cold weather or whenmoisture is present. TREMstop Silicone is approved for use with both through penetrations and joints.

TREMstop IA (Intumescent Acrylic) – An intumescent firestopping sealant

More often used for through penetrations, TREMstop IA expands tofill the void left when combustible materials burn away during a fire,and prevents fire from spreading. TREMstop IA is approved for 95percent of the applications commonly encountered on a jobsite.With superb unprimed adhesion, easy gunning and the ability to bepainted once fully cured, TREMstop IA is the perfect choice for staticjoints listed up to a 2 hr rating.

Dymeric 240 – A multi-component polyurethane sealant

Designed specifically for exterior fire-rated joints, Dymeric 240 is a non-sag, general purpose sealant providing a flexible, long life,durable, weathertight seal for both new construction and renovationprojects.

Dymeric ULC – A multi-component polyurethane sealant

Available only in Canada, Dymeric ULC is specifically designed forfire-rated joints, and will provide a flexible, durable seal for bothnew construction and renovation projects.

Tremco productsare recognizedby:

Founding MemberSilver Member

Tremco - Middle East and Africa RegionPO Box - 3034, Dubai, UAEPhone - 00971 55 481 3069Email - rajesh.thakur@tremco-illbruck.com