transas offshore simulator - electrotech …...transas offshore simulator 2 3 transas offshore...
TRANSCRIPT
TRANSASOFFSHORE
SIMULATOR
TRANSAS OFFSHORE SIMULATOR
2 3
Transas offshore simulator is designed for training of teams involved in transfer and supply of anchored mobile offshore units.
The system is intended for education of:• MOU personnel (oil installation manager, MOU DP master, anchor winch operator, offshore crane
operator)
• AHT personnel (AH winch operator, DP master/navigator)
TRAINING LEVELS• Introduction course: basic training for personnel without anchor handling experience
• Team performance training: training for bridge and deck teams performing anchor handling operations
• Troubleshooting: training for personnel involved in emergency situations
COMPLIANCETo ensure education to the highest industry standards, the simulator is designed in line with the following regulations:• UKOAA Guidelines for Safe management and operation of offshore support vessels
• Norwegian Oil Industry Association (OLF NSA) Guidelines for safe anchor handling and towing
• IMO recommendations on training of personnel on mobile offshore units
• DNV: Anchor handling and DP simulator
• Nautical Institute: DP simulator requirements
OFFSHORE SIMULATOR STRUCTURE
ANCHOR HANDLING TUG AFT BRIDGE• Retrieving Anchor
• Towing
• Deploying Anchor
MOU CONTROL BRIDGE • Project coordination (OIM)
• MOU Positioning (MOU DP master)
• Anchor tensioning (MOU Winch operator)
OFFSHORE CRANE BRIDGE• Transfer/receive PCP
• Transfer/receive сargo
DP Control
Main Engine ControlWinch Control
Thruster
Azimuth Thruster
Visualizationsystem
Port Winch panelPort Triplex panel
Main Engine panel
STBD Winch panelThruster panelSTBD Triplex panelDynamic Positioning
TRANSAS OFFSHORE SIMULATOR
4 5
CONFIGURATION: FROM COMPACT TO FULL MISSION INSTRUCTOR CAPABILITIESInteractive instructor panel provides quick access to exercise objects and allows selecting any object, adding /deleting and moving/rotating it, connecting /disconnecting wire, chain, chaser, anchor, and dragging object (applying force or moment. Quick view camera control adds more flexibility to the exercise management, allowing prompt switching between bird view, deck, winch, and anchor view. Instructor also can define camera position himself. Finally, instructor has full control of deck equipment.
ANCHOR HANDLING TUG MODELSModels are based upon the model ‘Template’ design, allowing for easy customization with the help of the Transas’ ‘Virtual Shipyard’ model editing tool. A full range of vessel types can be created, including vessels equipped with Dynamic Positioning System, with the characteristics required by the customer.
Ship: Norskan Copacabana
Platform: MOSS CS50 Mk II
TRANSAS OFFSHORE SIMULATOR
6 7
Winch system
Retrieving anchorChasing anchor
Pin system (retractable pins, shark jaws, stern rollers)
Decking anchor
Deck crew control
MODELLING OF ANCHOR HANDLING OPERATIONSTransas Offshore Simulator features a detailed model of deck equipment, an accurate model of anchor handling operations, interactive control of anchor handling operations and flexibility in building scenarios for various anchor-handling methods.
The system faithfully simulates interaction of all objects involved in the process. The entire winch system is modelled including anchor handling/towing winches, secondary winches and tugger winches.
The pin system includes retractable pins, shark jaws and stern rollers.
Various anchor handling methods can be practiced in the simulator: • run/retrieve anchor using PCP
• install/remove insert wire
• run/ retrieve anchor using buoy and pennant wire
• retrieve anchor using J-Hook
• install/retrieve a pre-laid system
DYNAMIC POSITIONING SYSTEM TRAININGThe simulator enables:• Holding position and course, manoeuvring in various sea and
weather conditions, anchor handling
• Oil spill response and rescue operations training
• Incorporation of customer-defined exercise areas and customer’s ship controls
DPS hardware and software as per today:• NAVIS IVCS solution
• Rolls-Royce solution
• Marine Technologies solution
Other systems can be interfaced upon request.
OIL RIG CRANE OPERATIONSThe simulator provides oil rig crane operator training. The following operations can be practiced:• Transfer/receive PCP
• Transfer /receive cargo
Copyright © 2011 Transas Marine Limited. All rights reserved.
WWW.TRANSASMARINE.COM
TRANSAS MARINE INTERNATIONALtel.: +46 31 769 56 00fax: +46 31 694 184e-mail: [email protected] [email protected]
TRANSAS MARINE (UK) LTD.tel.: +44 23 9267 4000fax: +44 23 9269 7554e-mail: [email protected]
TRANSAS USA INC.tel.: +1 425 486 2100fax: +1 425 486 2112e-mail: [email protected]
TRANSAS CHINAtel.: +86 21 3392 6750fax: +86 21 3392 6790e-mail: [email protected]
TRANSAS MARINE PACIFIC PTE LTD.tel.: +65 627 10 200fax: +65 627 17 300e-mail: [email protected]
TRANSAS HELLAS LTD.tel.: +30 210 899 5164fax: +30 210 899 5218e-mail: [email protected]
TRANSAS HONG KONG LTD.tel.: +852 281 516 03fax: +852 281 516 90e-mail: [email protected]
TRANSAS BALTIC SIAtel.: +371 6 716 2100 fax: +371 6 716 2101e-mail: [email protected]
TRANSAS MIDDLE EASTtel.: +97 14 357 3625fax: +97 14 357 3626e-mail: [email protected]
TRANSAS MARINE NORWAYtel.: +47 91 70 5060fax: +47 94 76 2319e-mail: [email protected]
TRANSAS BENELUXtel.: +31 10 428 5599fax: +31 10 428 5590e-mail: [email protected]
TRANSAS MARINE POLANDtel.: +48 58 774 7283 fax: +48 58 774 7283e-mail: [email protected]
TRANSAS MARINE GMBHtel.: +49 40 890 6660 fax: +49 40 881 1379e-mail: [email protected]
TRANSAS BLACK SEAtel.: +90 216 337 0852fax: +90 216 337 0852e-mail: [email protected]
TRANSAS NAVIGATORtel.: +7 812 325 3131fax: +7 812 325 3132e-mail: [email protected]
TRANSAS MEDITERRANEAN SAStel.: +33 4 89 86 4100fax: +33 4 89 86 4129e-mail: [email protected]
TRANSAS WORLDWIDE DISTRIBUTORS AND SERVICE NETWORK