traditional method Ülke enerji method
TRANSCRIPT
Cut oil exchange time by 75%!
Traditional Method Ülke Enerji Method1. Oil buckets and drums up and down the tower 1. Triple hoses
2. 2.
3. Open barrels and totes of oil
No �ltering available
3. Enclosed process
New oil is �ltered before re�lling gearbox
4. Gravity drain 4. Vacuum drain
5. Heavy lifting of 20 liter oil buckets 5. Gearbox �ushing before new oil transfer
6. Multiple winching cycles
7. 8-10 stoppage hours for one complete oil change
8. Extra cost of man/hour
9. New oil transferred on residual waste
6. Connect directly to gearbox
7. Hoses up once and down once
8. 1.5 to 2.5 hours
9. No extra stoppage hours or man/hourscosts needed
(+90) 212 284 03 03 [email protected]
Ortabayır Mah.Talatpaşa Cad. No:67 Kat:2 Gültepe Kağıthane / İSTANBUL
A safer, cleaner, faster andmore cost e�ective method toexchange oils in wind turbines
Ülke Enerji believes that the method usedto deliver lubricants to a wind turbine gearbox orhydraulic system is just as important as the quality ofthe lubricant itself.
And without the use of specialist pumpingequipment such as a Sage Oil Vac pumping unit aproducts integrity and cleanliness levels could beeasily jeopardised during the oil exchange process.
By using a Sage Oil Vac pump system to deliver theproducts, Ülke Enerji can ensure that theproducts being delivered to the wind turbine gearboxor hydraulic system are at their optimum level forboth product integrity and oil cleanliness levels.
When combining this level of product deliveryprotection with Ülke Enerji pre-deliveryproduct �ltration system, each Sage Vac Pump unitwill o�er customer’s better overall protection of theirequipment, less downtime during oil exchanges,guaranteed product cleanliness levels toDIN ISO 4406:99, increased productivity andimproved pro�tability.
• Product dedicated hose systems that remove the risk of any accidental cross contamination of products.
• 130 metre hose reel systems for the removal of the waste oil products and the replacement of the clean fresh gear oil or hydraulic oil products to the nacelle.
• 1,000 litre heated new gear oil tank to ensure for a fast delivery of products to the gearbox.
• 400 Litre dedicated hydraulic oil tank.
• 1,000 litre Waste oil tank for the removal of the waste oil products from sites
• Flushing lances specially designed to help clean the gear teeth during the flushing process
• Metered hose ends for accurate measurement of the products delivered
• A final product delivery filtration system that ensures maximum product cleanliness protection directly to the point of fill.
• A spill containment plan
(+90) 212 284 03 03 [email protected]
Ortabayır Mah.Talatpaşa Cad. No:67 Kat:2 Gültepe Kağıthane / İSTANBUL